Fujitsu Siemens Computers S7211 User manual

Fujitsu Siemens Computers S7211 User manual
Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S7210/S7211
Document Date: 10/10/2007
Document Part Number: FPC58-1774-01
F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N
1
LifeBook S Series BIOS
S Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your notebook. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your notebook.
The BIOS Setup Utility configures:
■
■
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such
as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following (or use
the TrustedCore Menu, as detailed in the next section):
1. Turn on or restart your notebook.
2. Press [F2] once the Fujitsu logo appears on the
screen. This will open the main menu of the BIOS
Setup Utility with the current settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the
[Enter] key or click on the left mouse or touchpad
button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the
following menus and information screens:
■
■
■
■
■
■
■
■
BIOS Setup
Diagnostic Screen
Boot Menu
Recovery and Utility
Diagnostic Program
Patent Information
System Information
Continue Booting
Clicking on any of the fields will invoke the screen,
information, or action described.
The Boot Menu can also be invoked by pressing the
[F12] key when the Fujitsu logo appears on the screen.
2
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Info,
System, Advanced, Security, Boot, and Exit. This document explains each menu in turn, including all
submenus and setup items.
The following procedures allow you to navigate the
setup utility menus:
], [
]
1. To select a menu, use the cursor keys: [
2. To select a field within a menu or a submenu, use the
cursor keys: [ ], [ ].
3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next lower
selection and [F5] or [-] to go to the next higher
selection.
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press the [Esc]
key.
6. To go to the Exit menu from any other menu,
press the [Esc] key.
■
Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.
■
Pressing the Enter key with the highlight
on a selection that is not a submenu or
auto selection will cause a list of all
options for that item to be displayed.
Pressing the Enter key again will select
the highlighted choice.
7. Pressing the [F9] key resets all items in the BIOS to
the default values.
8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in the system configuration
that does not agree with the parameter settings stored in
your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not too
Info Menu
severe, it will give you an opportunity to modify the
setup utility settings, as described in the following steps:
1. When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key.
■
If your notebook emits a series of beeps
that sounds like a code and the display is
blank, please refer to the Troubleshooting Section in the system User’s Guide.
The Troubleshooting Section includes a
list of error messages and their meanings.
■
If your data security settings require it,
you may be asked for a password before
the operating system will be opened.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Info Menu with current parameters values.
3
LifeBook S Series BIOS
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info Menu is a display only screen that provides the
configuration information for your notebook.
The information, including CPU type and
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.
The following table shows the names of the menu fields
for the Info menu and the information displayed in
those fields. These fields are for information purposes
only, and cannot be modified by the user.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Product Name:
S7210
Serial Number:
BIOS Version:
XXXXXXXX
1.XX (XX/XX/2007)
Processor Type:
L2 Cache:
Intel(R) Core(TM)2 Duo CPU
4096 KB
Total Memory:
Memory Slot 1:
Memory Slot 2:
2048 MB
1024 MB DDR2 SDRAM
1024 MB DDR2 SDRAM
Onboard MAC Address:
UUID:
00-17-42-XX-XX-XX
XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
T7700 @ 2.40GHz
F9
F10
Setup Defaults
Save and Exit
Figure 1. Info Menu
Table 1: Fields, Options and Defaults for the Info Menu
Menu Field
Default
Menu Field
Default
Note that all of the fields on this screen are display only and are for reference.
Note that some the information listed will be different for your system, depending upon the system configuration.
4
Product Name:
S6510
Total Memory:
2048 MB
Serial Number:
Not Defined
Memory Slot 1:
1024 MB DDR2 SDRAM
BIOS Version:
1.XX (XX/XX/2007)
Memory Slot 2:
1024 MB DDR2 SDRAM
Processor Type:
Intel(R) Core(TM)2 Duo CPU
T7700 @ 2.40GHz
Onboard MAC Address:
XX-XX-XX-XX-XX-XX
L2 Cache:
4096 KB
UUID:
XXXXXXXX-XXXX-XXXX-XXXXXXXXXXXXXXXX
System Menu
SYSTEM MENU – SETTING STANDARD SYSTEM PARAMETERS
The System Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information.)
the field’s function and any special information needed
to help understand the field’s use.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or type time or date from the MS-DOS
prompt.
The following tables show the names of the menu fields
for the System menu and its submenus, all of the options
for each field, the default settings and a description of
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Item Specific Help
System Time:
System Date:
[14:57:01]
[10/08/2007]
Adjust calendar clock.
▲ ▲
Drive0
Drive1
[FUJITSU MHW2120BH]
[HL-DT-ST DVDRAM_GSA-T20N]
Language:
[English (US)]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9
F10
Setup Defaults
Save and Exit
Figure 2. System Menu
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits for
year. (MM/DD/YYYY) for example: 03/20/2007. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
5
LifeBook S Series BIOS
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field
Options
Default
Description
Drive0
Selects the Drive0
Serial ATA drive
submenu
The product
number of the hard
drive.
Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Serial ATA Drive0 submenu allowing additional
device configuration options for this interface.
Drive1:
Selects the Drive1
Serial ATA drive
submenu
The product
number of the
optical drive.
Display the type of device on this ATA/IDE interface, if there is one.
Pressing the Enter key selects the Serial ATA Drive1 submenu allowing additional device configuration options for this interface.
Language:
■
[English (US)]
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
■
6
English (US)
Japanese (JP)
System Menu
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Item Specific Help
Drive0 [FUJITSU MHW2120BH]
Type:
Select Serial ATA/IDE
drive installed here.
[Auto]]
LBA Format
234441648
120GB SATA1
Total Sectors:
Maximum Capacity:
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 3. Drive0 Master Submenu
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field
Options
Default
Description
Type:
■
[Auto]
Selects the hard drive device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following
Setup items do not appear.
■
Auto
None
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
Maximum Capacity:
---
---
The maximum capacity of your hard disk
7
LifeBook S Series BIOS
Drive1 Submenu of the System Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Item Specific Help
Drive1 [HL-DT-ST DVDRAM_GSA-T20M]
Type:
[Auto]
Transfer Mode:
Ultra DMA Mode:
[Standard]
[Disabled]
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 4. Drive1 Submenu
Table 4: Fields, Options and Defaults for the Drive1 Submenu of the System Menu
Menu Field
Options
Default
Description
Type:
■
[Auto]
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to toggle the selections.
■
Auto
None
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following setup items do not appear.
Transfer Mode:
■
■
■
■
■
■
■
Ultra DMA
Mode:
■
■
■
■
■
■
■
8
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Standard]
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
This option cannot be changed (automatically identified by the
BIOS).
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. Multi-word DMA is
automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3,
and set to mode 2 for Fast PIO 4 / DMA.
This option cannot be changed (automatically identified by the
BIOS).
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
System Menu
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
9
LifeBook S Series BIOS
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
■
■
■
■
■
Set the I/O addresses for the serial and parallel ports.
Set the keyboard and mouse features.
Select between the display panel and an external
display.
Enable or disable compensation for your display.
Enable or disable the IDE, Mouse, LAN, and Wireless
LAN controllers.
Info
Configure CPU and USB features in your system.
(See Navigating through the Setup Utility on page 2 for
more information.)
■
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a description of the field’s function and any special information
needed to help understand the field’s use.
Phoenix TrustedCore(tm) Setup Utility
System
Advanced
Security
Boot
Exit
Item Specific Help
▲ ▲ ▲ ▲ ▲ ▲ ▲
Serial/Parallel Port Configurations
Keyboard/Mouse Features
Video Features
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
▲
Event Logging
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Configures serial ports
and parallel ports.
F9 Setup Defaults
F10 Save and Exit
Figure 5. Advanced Menu
Table 5: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
Serial/Parallel Port Configurations
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to
modify settings for serial, infrared and parallel ports.
Keyboard/Mouse Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and
internal keyboard and mouse parameters.
Video Features
When selected, opens the Video Features submenu, which allows setting of the display parameters,
including routing of video signals to different displays.
Internal Device Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or
disabling the ATA, IDE, Bluetooth, Modem, LAN, and WLAN Controllers.
10
Advanced Menu
Table 5: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
CPU Features
When selected, opens the CPU Features submenu to allow you to change the CPU speed for battery
life optimization.
USB Features
When selected, opens the USB Features submenu to allow you to enable or disable legacy USB
devices and SCSI SubClass support.
Miscellaneous Configurations
When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable
the power button, Wake Up On LAN, and control volume settings.
Event Logging
When selected, opens the event logging submenu.
11
LifeBook S Series BIOS
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu lets you
set the I/O addresses and interrupt levels for the serial
and parallel ports of your notebook.
I/O addresses, DMA channels and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices,
serial or parallel, have the same address
assigned, your notebook will not function
normally. Keep a record of original settings
before making any changes if restoration is
required. See your hardware and software
documentation as well as the setup utility
to determine settings and limitations.
Info
System
■
To prevent IRQ and address conflicts,
avoid changing the default settings. If
you must change the settings, you can
call 1-800-8Fujitsu for technical assistance.
■
If your notebook emits a series of beeps
that sounds like a code and the display is
blank, refer to the Troubleshooting Section in the system User’s Guide. The
Troubleshooting Section includes a list of
error messages and their meanings.
■
All I/O addresses in Table 5 are in hexadecimal.
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Serial/Parallel Port Configurations
Serial Port:
Base I/O Address/IRQ:
Parallel Port:
Mode:
Base I/O Address:
Interrupt:
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
[3F8/IRQ 4]
[Enabled]
[Bi-directional]
[378]
[IRQ 7]
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 6. Serial/Parallel Port Configuration Submenu
12
Advanced Menu
Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu
Menu Field
Options
Default
Description
Serial Port:
■
Disabled
Enabled
Auto
[Enabled]
Configures the serial port using either no configuration (Disabled),
a user defined configuration (Enabled), or by allowing the BIOS or
OS to choose the configuration (Auto).
3F8/IRQ 4
2F8/IRQ 3
3E8/IRQ 4
2E8/IRQ 3
[3F8/IRQ 4]
Allows user to set the serial port base I/O address and interrupt
request when serial port is Enabled.
Disabled
Enabled
Auto
[Enabled]
Configures the parallel port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the
BIOS or OS to choose the configuration (Auto).
Output Only
Bi-directional
ECP
[Bi-directional]
When the parallel port is enabled this option is available allowing
the user to set the parallel port mode. Bi-directional allows twoway transfer of information between your notebook and a connected parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to
the printer or similar device. ECP Mode allows communication
with the ECP class of parallel I/O devices.
378
278
3BC
[378
Allows user to set the parallel port base I/O address when the parallel port is Enabled.
IRQ 5
IRQ 7
[IRQ 7]
Allows user to set the parallel port interrupt when the parallel port
is Enabled.
■
■
Base I/O Address/IRQ:
■
■
■
■
Parallel Port:
■
■
■
Mode:
■
■
■
Base I/O address:
■
■
■
Interrupt:
■
■
13
LifeBook S Series BIOS
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and
keyboard.
Info
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
System
Keyboard/Mouse Features
Item Specific Help
[On] or [Off]
Numlock is On or Off.
[On/Padlock Off]
Numlock is On, but use
with [Fn] for 10-key
input.
[Auto]
Numlock is set to On/
Padlock Off when PS/2
keyboard is connected,
otherwise Off.
Numlock:
[Auto]
Hot Plug:
[Enabled]
Internal Pointing Device: [Auto Disabled]
Initialization on Resume: [Fast]
* Windows XP or later
OS preserves Numlock
state when the user
logs off.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 7. Keyboard/Mouse Features Submenu
Table 7: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Numlock:
■
[Auto]
Sets the NumLock function state when the computer completes booting. When [On] or [Off], Numlock is on or off. When [On/Padlock Off]
is selected, Numlock is on, but [Fn] key must be pressed used for 10-key
input. When [Auto] is selected, Numlock is set to On/Padlock Off when
a PS/2 keyboard is connected, otherwise it is off.
■
■
■
Auto
On
Off
On/Padlock Off
Windows XP (or later OS) preserves Numlock state when the user logs
off.
Hot Plug:
■
■
Internal Pointing Device:
■
■
■
■
Initialization
on Resume:
14
■
■
Disabled
Enabled
[Enabled]
Enables and disables the ability to plug a mouse or keyboard into
the PS/2 port and have it immediately recognized and activated.
Auto Disabled
Manual Setting
Always Enabled
Always Disabled
[Auto Disabled]
Sets the device controlling the mouse cursor on the screen. Always
Enabled makes the pointing device always enabled whether there is an
external mouse or not. Always Disabled makes the pointing device
always disabled. Auto Disabled disables the internal pointing device
when an external pointing device is connected to the PS/2 port. Manual
Setting allows the device to be enabled or disabled using a HotKey.
Fast
Normal
[Fast]
When Fast is selected, initialization for the external PS/2 devices is optimized to speed up on Resume. When Normal is selected, initialization is
not optimized.
Advanced Menu
Video Features Submenu of the Advanced Menu
The Video Features submenu is for setting the display parameters.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Item Specific Help
Video Features
Display:
[Auto]
Select display terminal.
* This setting is not
effective after
operating system
starts up.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 8. Video Features Submenu
Table 8: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Display:
■
[Auto]
Selects where the video signal will be routed. Note that this setting is
overridden after Windows starts up.
■
■
■
Internal Flat Panel
External (Analog)
External (Digital)
Auto
15
LifeBook S Series BIOS
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to enable or disable IDE, Bluetooth, LAN and Wireless
LAN Controllers.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Internal Device Configurations
Serial ATA Controller:
AHCI Configuration:
Intel(R) Turbo Memory:
IDE Controller:
Bluetooth(R):
LAN Controller:
Wireless LAN:
Internal Camera:
[Disabled]
Serial ATA port is
disabled.
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Item
Select Menu
[Enabled]
Serial ATA port is
enabled.
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 9. Internal Device Configuration Submenu
Table 9: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Serial ATA Controller:
■
Disabled
Enabled
[Enabled]
Enables or disables the Serial ATA port.
Disabled
Enabled
[Enabled]
Enables or disables the selected Advanced Host Controller Interface (AHCI).
Disabled
Enabled
[Enabled]
Enables or disables the Intel Turbo Memory feature,.
Disabled
Enabled
[Enabled]
Enables or disables selected IDE devices.
Disabled
Enabled
[Enabled]
Enables or disables the Bluetooth controller.
Disabled
Enabled
[Enabled]
Enables or disables the LAN controller.
Disabled
Enabled
[Enabled]
Enables or disables the Wireless LAN controller.
Disabled
Enabled
[Enabled]
Enables or disables the controller for the built-in camera.
■
AHCI Configuration:
■
■
Intel(R) Turbo Memory:
■
■
IDE Controller:
■
■
Bluetooth Controller:
■
■
LAN Controller:
■
■
Wireless LAN:
■
■
Internal Camera:
■
■
16
Advanced Menu
CPU Features Submenu of the Advanced Menu
The CPU Features submenu provides options for configuring the Intel Core Multi-Processing and SpeedStep power
management features of the CPU.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
CPU Features
Item Specific Help
Core Multi-Processing:
[Enabled]
SpeedStep(R) Technology:
On Battery:
On AC:
[Enabled]
[Battery Optimized]
[Maximum Performance]
Select Core
Multi-Processing
enabled or disabled.
XD Bit functionality:
[Enabled]
Virtualization Technology: [Disabled]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 10. CPU Features Submenu
Table 10: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Core MultiProcessing:
■
Enabled
Disabled
[Enabled]
Enables or disables the Intel Core Multi-Processing features.
SpeedStep(R)
Technology:
■
Disabled
Enabled
[Enabled]
Enables or disables the SpeedStep(R) Technology features. When
disabled, On Battery and On AC are disabled.
Maximum
Performance
Battery Optimized
Automatic
[Battery
Optimized]
When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power requirements are optimized for battery operation. When Automatic is
selected, the CPU speed is determined by the power source used.
Maximum
Performance
Battery Optimized
Automatic
[Maximum
Performance]
When Maximum Performance is selected, CPU speed is maximized. When Battery Optimized is selected, CPU power requirements are optimized for battery operation. When Automatic is
selected, the CPU speed is determined by the power source used.
Enabled
Disabled
[Enabled]
Enables or disables the Execute Disable Bit feature.
Disabled
Enabled
[Disabled]
Enables or disables Virtualization Technology, an Intel technology
which includes hardware enhancements to improve upon software-based virtualization technologies.
On Battery:
■
■
■
■
■
On AC:
■
■
■
XD Bit
functionality:
■
Virtualization
Technology:
■
■
■
17
LifeBook S Series BIOS
USB Features Submenu of the Advanced Menu
The USB Features submenu provides options for enabling or disabling the USB devices.
Phoenix TrustedCore(tm) Setup Utility
Info
System
Advanced
Security
Boot
Exit
USB Features
Legacy USB Support
SCSI SubClass Support:
Item Specific Help
[Disabled]
The feature is disabled.
[Enabled]
[Enabled]
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 11. USB Features Submenu
Table 11: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Legacy USB Support:
■
■
SCSI SubClass Support:
■
■
18
Default
Description
Disabled
Enabled
[Enabled]
When Enabled is selected, Legacy USB Emulation is enabled
and the USB devices are available without a USB-aware OS.
When Disabled is selected, Legacy USB support is disabled.
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the
SCSI subclass in the mass storage class (e.g., USB Memory
Key) are enabled. Note that enabling this feature may cause
the system to hang during POST, depending on the device
that is connected.
Advanced Menu
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the
Wake Up On LAN feature, and setting the volume and video memory size.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Miscellaneous Configurations
Power Button:
Wake up on LAN:
On Battery:
Force LAN Boot:
Resume on LAN:
Volume Setting:
Hardware Power Management:
Select Item
Select Menu
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Always Enabled]
[Middle]
[Enabled]
Configures the power
button.
*ACPI OS ignores this
setting.
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 12. Miscellaneous Configurations Submenu
Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced
Menu
Menu Field
Options
Default
Description
Power Button:
■
Disabled
Power Off
[Disabled]
Selecting Disabled disables the power button. Selecting Power Off allows you to
turn off system power with the power button.
Disabled
Enabled
[Disabled]
Selecting Enabled allows the system to wake when the internal LAN device receives
a specific signal while in power-off state. Selecting Disabled disables this feature.
Enabled
Disabled
[Enabled]
When this is disabled, Wake up on LAN is only enabled when the AC Adapter is
connected.
Disabled
Enabled
[Disabled]
This feature is active only when “Wake up on LAN” is enabled. When enabled, in
the event of a system wake-up on LAN, the system will try to first boot from the
LAN before attempting to boot from any other device, regardless of the BIOS boot
priority settings or disabling of the Preboot Execution Environment.
On AC
mode only
Always
Enabled
[Always
Enabled]
When [On AC mode only] is selected, wake up on LAN from sleep or hibernate is
enabled only when the AC Adapter is connected. Note that Wake up on LAN from
Sleep or Hibernate is determined by the OS setting.
■
Wake up on LAN:
■
■
On Battery:
■
■
Force LAN Boot:
■
■
Resume on LAN:
■
■
19
LifeBook S Series BIOS
Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced
Menu
Menu Field
Options
Default
Description
Volume Setting:
■
Off
Minimum
Middle
Maximum
[Middle]
Selects the initial volume setting for the system.
Disabled
Enabled
[Enabled]
Enables or disables the Hardware Power Management feature.
■
■
■
Hardware Power
Management:
20
■
■
Advanced Menu
Event Logging Submenu of the Advanced Menu
The Event Logging submenu configures event logging features for DMI events.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
View Event Log:
[Enter]
Event Logging:
System Boot Event:
[Enabled]
[Disabled]
Clear All Event Logs:
[No]
Mark Events as Read:
[Enter]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Press <Enter> key to
view the contents of
the event log.
F9 Setup Defaults
F10 Save and Exit
Figure 13. Event Logging Submenu
Table 13: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log Capacity:
Space Available
Display only
Event Log Validity:
Valid
Display only
View Event Log:
■
Enter
[Enter]
Allows you to view content of event log
Event Logging:
■
Disabled
Enabled
[Enabled]
Turns event logging on and off for all DMI events.
Disabled
Enabled
[Disabled]
Turns event logging on and off for DMI system boot events.
No
Yes
[No]
When set to [Yes] all event logs will be cleared at next boot.
Enter
[Enter]
Lets you mark all events currently in the event log as having been read.
■
System Boot Event:
■
■
Clear All Event Logs:
■
■
Mark Events as Read:
■
21
LifeBook S Series BIOS
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration. (See
Navigating through the Setup Utility on page 2 for more
information.)
The following tables show the names of the menu fields
for the Security Menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.
Remember your passwords! If you set and
forget your User and Master hard disk
passwords, Fujitsu Computer Systems will
not be able to reset it. You may lose data
and have to replace your system board or
hard disk drive.
Info
System
■
Entering a password incorrectly 3 times in
a row causes the keyboard and mouse to
be locked out and the warning [System
Disabled] to be displayed. If this happens, restart the computer by turning off
and on the power with the power switch
and use the correct password on reboot.
■
If you make an error when re-entering
the password a Warning will display on
the screen. To try again press [Enter],
then retype the password. Press [Esc] to
abort the password setting process.
■
If the Power Management Security is
Enabled and the Password on Boot is Disabled you will not have to type your
password upon resuming the system
from the Suspend or Save-to-Disk
modes. Power Management Security will
work only if Password boot is enabled.
■
Boot sector protection must be set to
[Normal] to install or upgrade an
operating system.
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Item Specific Help
▲ ▲ ▲
Supervisor Password Is:
User Password Is:
Clear
Clear
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
TPM (Security Chip) Setting
Security Panel on Resume:
[Enter]
[Enter]
[0]
[Disabled]
[Disabled]
[All]
[Enabled]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
Figure 14. Security Menu
22
Then password entry is
required to enter BIOS
Setup.
[Enabled]
▲
F1 Help
ESC Exit
Press <Enter> key to
set Supervisor Password
to enable any password
features.
F9 Setup Defaults
F10 Save and Exit
Security Menu
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system supervisor password is set
and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Set Supervisor
Password
–—
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor Password may
be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press the
Enter key instead of entering characters in the Enter New Password field and in
the Re-enter New Password field. When a Supervisor Password is set it must be
used to access the BIOS setup utility.
Set User Password
–—
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets, changes or
cancels the User Password. A User Password may be up to seven characters long
and must include only letters or numbers (no symbols). Passwords are NOT
case-sensitive. To cancel a password press [Enter] key instead of entering characters in the Enter New Password field and in the Re-enter New Password field.
When a User Password is set it must be used to access the BIOS setup utility.
Minimum User
Password Length:
–—
[0]
Supervisor can set password length (0 to 8) for user password. User cannot set a
password shorter than the minimum length.
Password on Boot:
■
Disabled
First Boot
Every Boot
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just once
after the Power On Self Test (POST) before the operating system will be read
from a disk. When set to Every Boot, a password (User or Supervisor) is required
every time after the Power On Self Test (POST) before the operating system will
be read from a disk. When set to Disabled no password is required.
Disabled
Enabled
[Disabled]
When disabled, password entry is not required when the system wakes up automatically. When enabled, password entry is required upon wake up.
All
Supervisor only
[All]
Supervisor only allows access to boot the computer to removable media after
the Supervisor Password is entered.
Disabled
Enabled
[Enabled]
When disabled, the BIOS Flash memory will be write protected.
■
■
On Automatic
Wake up:
■
■
Boot from
Removable Media:
■
Flash Write:
■
■
■
Hard Disk Security:
–—
–—
Configures hard disk security features
Owner
Information:
–—
–—
Sets Owner information.
TPM (Security
Chip) Setting
___
___
Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to
configure the Security Chip.
Security Panel on
Resume:
■
[Enabled]
Enables or disables the Security Panel feature upon Resume from Suspend.
■
Disabled
Enabled
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
23
LifeBook S Series BIOS
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Info
System
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Hard Disk Security
Drive0:
Set Master Password
Set User Password
Drive1:
Set Master Password
Set User Password
Clear
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
Password Entry on Boot:
[Enabled]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 15. Hard Disk Security Submenu
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
Drive0:
___
Clear
Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
Set Master
Password
___
[Enter]
Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
Set User Password
___
[Enter]
Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive0 User Password is set, it
must be used to access the modular hard drive if it is used in another system. Note
that the password will not take effect until the system has been rebooted.
Drive1:
___
Clear
Display-only. Default is Clear. When the Drive1 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
Set Master
Password
___
[Enter]
Sets, changes or cancels the Drive1 Master Password. The Drive1 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive1 Master Password is set,
it must be used to access the hard drive if it is used in another system. Note that the
password will not take effect until the system has been rebooted.
24
Security Menu
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
Set User Password
___
[Enter]
Sets, changes or cancels the Drive1 User Password. The Drive1 User Password may
be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. When a Drive1 User Password is set, it
must be used to access the modular hard drive if it is used in another system. Note
that the password will not take effect until the system has been rebooted.
Password Entry on
Boot:
■
[Enabled]
When set to disabled, entry of a Hard Disk Password is not required before OS boot.
(The hard disk is still password-protected without password entry.)
■
Disabled
Enabled
25
LifeBook S Series BIOS
Owner Information Submenu of the Security Menu
The Owner Information submenu is for setting owner information. Note that the owner information cannot be set
without having entered a Supervisor Password.
Info
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
System
Owner Information
Owner Information Is:
Clear
Set Owner Information
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 16. Owner Information Submenu
Table 16: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner Information
Is:
–—
Clear
Display only.
Set Owner Information:
–—
[Enter]
Field to write owner information, (i.e., name).
Foreground Color:
■
Light Cyan
Light Red
Light Magenta
Yellow
Bright White
[Gray]
Set foreground color.
Light Cyan
Light Red
Light Magenta
Yellow
Bright White
[Black]
Set background color.
■
■
■
■
■
Background Color:
■
■
■
■
■
■
26
Black
Blue
Green
Cyan
Red
Magenta
■
Black
Blue
Green
Cyan
Red
Magenta
■
■
■
■
■
■
■
■
■
Brown
White
Gray
Light Blue
Light Green
■
Brown
White
Gray
Light Blue
Light Green
■
■
■
■
■
■
■
■
■
Security Menu
TPM (Security Chip) Setting Submenu of the Security Menu
The Trusted Platform Module (TPM) Security Chip Setting submenu is used to enable or disabled the embedded security chip.
Main
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Advanced
Security Chip Setting
Item Specific Help
Security Chip:
[Enabled]
Current TPM State:
Change TPM State:
Clear Security Chip
Disabled and Deactivated
[No Change]
[Enter]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 17. TPM (Security Chip) Setting Submenu
Table 17: Fields, Options and Defaults for TPM (Security Chip) Submenu of Security Menu
Menu Field
Options
Default
Description
Security Chip:
■
[Enabled]
Allows you to enable or disable the Trusted Platform Module
(TPM) chip. Note that this is only active if a Supervisor Password has been entered. A reboot is required after exit to configure the Security Chip correctly. Clear Security Chip option
becomes selectable after reboot.
■
Disabled
Enabled
Current TPM State:
–—
Disabled and Deactivated
Indicates the current state of the TPM chip.
Change TPM State:
■
Clear Security Chip
No Change
Disable and
Deactivate
[No Change]
■
Allows you to enable or disable the TPM chip when the Supervisor Password has been set.
■
Enter
[Enter]
Allows you to clear the Security Chip. Note that this does not
allow you to access already-encrypted data.
27
LifeBook S Series BIOS
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
Info
System
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
▲
[Disabled]
Boot Time Diagnostic Screen:
Boot Menu:
[Enabled]
Preboot Execution Environment: [Enabled]
Boot Device Priority
Item Specific Help
[Disabled]
Display the logo screen
during boot.
[Enabled]
Display the diagnostic
screen during boot.
Select Item -/Space Change Values
Select Sub-Menu
Select Menu Enter
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 18. Boot Menu
Table 18: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
Boot-time
Diagnostic Screen:
■
Disabled
Enabled
[Disabled]
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
Boot Menu:
■
Disabled
Enabled
[Enabled]
When Disabled, the Boot Menu is disabled and the [F12] key is
ignored. When Enabled, the Boot Menu is enabled.
Disabled
Enabled
[Enabled]
Turns on and off the preboot execution environment feature.
—
This menu allows setting up the source for the operating system.
See “The Boot Device Priority Submenu” in the following section.
■
■
Preboot Execution
Environment:
■
Boot Device Priority
—
28
■
Boot Menu
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
■
Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
■
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM
is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if
the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designations, however, your application software will use
the new designations.
Info
Phoenix TrustedCore(tm) Setup Utility
System
Advanced
Security
Boot
Boot Device Priority
Item Specific Help
Boot priority order:
1: Floppy Disk Drive
2: Drive0 HDD: FUJITSU MHW2120BH
3: Drive1 HDD: None
4: CD/DVD Drive
5: NETWORK: Marvell LAN
6:
7:
8:
Excluded from boot order:
: USB MEMORY: None
: USB HDD: None
Select Item
Select Menu
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Exit
F9 Setup Defaults
F10 Save and Exit
Figure 19. Boot Device Priority Submenu
Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: Drive1
4: CD/DVD Drive
5: NETWORK:
6:
7:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
The boot selections determine the order in which the BIOS searches for the operating system during a
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and
then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is
not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to
save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.
29
LifeBook S Series BIOS
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
Info
System
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
Phoenix TrustedCore(tm) Setup Utility
Advanced
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Exit System Setup and
save your changes to
CMOS.
F9
F10
Setup Defaults
Save and Exit
Figure 20. Exit Menu
Table 20: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory, then exit
the utility. A confirmation message Save Configuration changes and exit now? [Yes][No] is displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the
BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Discard
Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load
previous configuration now? [Yes] [No] will be displayed. When confirmed the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Save Changes
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.
Save Changes
and Power Off
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory. The
message Save configuration changes and power off now? [Yes] [No] will be displayed. When confirmed, the system will shut down. If No is selected, the system will return to the Exit menu. To return to another menu,
follow the directions in the Navigating Through the Setup Utility section.
30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement