MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR12 SERIES
■ FEATURES
●
●
●
●
Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP
Up to 50% less volume and board area than previous
generation telecom relay.
Slim type for high density mounting
Conforms to Bellcore TR-NWT-001089 and FCC Part 68
requirements
UL recognized and CSA certified
Low power consumption
Conforms to IEC 950 (W type only)
– 2.5 mm clearance and creepage between coil and contacts
–5000 V surge strength between coil and contacts (2x10µs
surge wave)
–2000 Vrms dielectric strength between coil and contacts
–UL 1950 and IEC950 (approval in process)
NO
TF
OR
DE
FB
N
R1
SI
E
BE
2 S GN W
DI
E
SC RIE
ON
S
TIN TO
IE
D
●
●
■ ORDERING INFORMATION
[Example]
FBR12 N
(a) (b)
D
(c)
12
(d)
–P
(e)
–** (–CSA)
(f )
(g)
(a)
Series Name
FBR12 : FBR12 Series
(b)
Enclosure & Coil Power
N
W
H
: Standard (plastic sealed type)
: High dielectric strength type (plastic sealed type)
: High sensitivity type
(c)
Coil Type
D
: DC coil
(d)
Nominal Voltage
(e)
Contact Material
Nil
–P
(f)
Custom Designation
To be assigned custom specification
(g)
CSA Standard
–CSA
–CSA
Refer to the COIL DATA CHART
: Gold-overlay silver-nickel
: Gold-overlay silver-palladium
: UL114 + CSA recognized
: UL1950 + CSA (under application)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR12ND05
Stamp: 12ND05
■ SAFETY STANDARD AND FILE NUMBERS
UL508, 1950, 114 (File No. E63615)
C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)
Nominal coil voltage
3 to 24 VDC
Contact rating
0.5 A 125 VDC resistive
2 A 30 VDC resistive
0.3 A 110 VAC resistive
1
FBR12 SERIES
■ SPECIFICATIONS
Item
Standard (Gold-overlay silver-nickel)
Standard
Contact
High dielectric
strength type
Arrangement
2 form C (DPDT)
Material
Gold-overlay silver-nickel
Style
Bifurcated
Resistance (initial)
Rating (resistive)
-P type (Gold-overlay silver-palladium)
Standard
High dielectric
strength type
Gold-overlay silver-palladium
NO
Maximum 100 mΩ (at 0.1 A 6 VDC)
0.5 A 125 VAC or 1 A 30 VDC
TF
OR
DE
FB
N
R1
SI
E
BE
2 S GN W
DI
E
SC RIE
ON
S
TIN TO
IE
D
Coil
Time Value
Insulation
Maximum Carrying Current
2 A (at 20°C)
Maximum Switching Power
62.5 VA or 60 W
Max. Switching Voltage*1
250 VAC or 220 VDC
Maximum Switching Current
2A
Minimum Switching Load*2
10 µA 10 VDC (reference)
Capacitance
(at 10 kHz)
Approximately 1.0 pF (between open contacts, adjacent contacts )
Approximately1.0 pF (between coil and contacts)
Nominal power (at 20°C)
Approximately
0.14 to 0.2 W
Approximately
0.23 to 0.25 W
Approximately
0.14 to 0.2 W
Approximately
0.23 to 0.25 W
Operate power (at 20°C)
Approximately
0.08 to 0.112 W
Approximately
0.13 to 0.14 W
Approximately
0.08 to 0.112 W
Approximately
0.13 to 0.14 W
Thermal Resistance at
Continuous Thermal Load
Approximately 115°C/W
Operating Temperature
–40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA)
Operating Humidity
45 to 85%RH
Operate (at nominal voltage)
Maximum 4 msec.
Release (at nominal voltage)
Maximum 4 msec.
Max. Switching Frequency
Mechanical 3 Hz or electrical 0.5 Hz (at contact rating)
Resistance (initial)
Minimum 1000 MΩ (at 500 VDC)
1,500
1,000 VAC
750
1 minimum
Dielectric between open contacts
Strength
adjacent contacts
Surge
Strength
between coil and contacts
1,500 VAC 1 min.
between open
contacts,
adjacent contacts
1,500 V
10 × 700 µs
between coil and contacts
Life
Other
2
5,000 V
2 × 10 µs
2,000 VAC 1 min.
10
2,500 V
2 × 10 µs
DC
2 × 105 operations minimum
5,000 V
2 × 10 µs
AC
1 × 105 operations minimum
5 × 105 operations minimum
200 × 103 operations minimum
Vibration
Resistance
Misoperation
10 to 55 Hz (double amplitude of 3.3 mm)
Endurance
10 to 55 Hz (double amplitude of 5.0 mm)
Shock
Resistance
Misoperation
500 m/s2 (11±1 ms)
Endurance
1,000 m/s2 ( 6 ±1 ms)
Weight
*1
700
1,500 VAC 1 min.
1 × 108 operations minimum
Mechanical
Electrical
(at contact rating)
2,500 V
2 × 10 µs
10
2,000 VAC 1 min.
2,500
1,250
Approx. 1.5 g
Approx. 1.9 g
Approx. 1.5 g
Approx. 1.9 g
If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment.
The minimum switching load varies with the switching frequency and operation environment.
2
FBR12 SERIES
■ SPECIFICATIONS
Item
High Sensitive Type
Standard (Gold-overlay silver-nickel)
Contact
Arrangement
-P type (Gold-overlay silver-palladium)
2 form C (DPDT)
Material
NO
Gold-overlay silver-nickel
Style
Gold-overlay silver-palladium
Bifurcated
Resistance (initial)
Maximum 100 mΩ (at 0.1 A 6 VDC)
TF
OR
DE
FB
N
R1
SI
E
BE
2 S GN W
DI
E
SC RIE
ON
S
TIN TO
IE
D
Rating (resistive)
Coil
Time Value
Insulation
0.3 A 125 VAC or 1 A 30 VDC
Maximum Carrying Current
2 A (at 20°C)
Maximum Switching Power
62.5 VA or 30 W
Max. Switching Voltage*1
250 VAC or 220 VDC
Maximum Switching Current
2A
Minimum Switching Load*2
10m VDC - 10µ A
Capacitance
(at 10 kHz)
Approximately 1.0 pF (between open contacts, adjacent contacts )
Approximately1.0 pF (between coil and contacts)
Nominal power (at 20°C)
Approximately 50mW
Operate power (at 20°C)
Approximately 40m W
Operating Temperature
–40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA)
Operating Humidity
45 to 85%RH
Operate (at nominal voltage)
Maximum 5 msec.
Release (at nominal voltage)
Maximum 5 msec.
Resistance (initial)
Minimum 1000 MΩ (at 500 VDC)
Dielectric between open contacts
Strength
adjacent contacts
750 VAC
1 minute
Surge
Strength
between coil and contacts
1,500 VAC 1 minutes
between open
contacts,
adjacent contacts
1,500 V
10 × 700 µs
between coil and contacts
Life
Other
1 x 108 operations minimum
Mechanical
Electrical
(at contact rating)
2,500 V
2 × 10 µs
DC
2 × 105 operations minimum
AC
1 × 105 operations minimum
5 × 105 operations minimum
200 × 103 operations minimum
Vibration
Resistance
Misoperation
10 to 55 Hz (double amplitude of 3.3` mm)
Endurance
10 to 55 Hz (double amplitude of 5.0 mm)
Shock
Resistance
Misoperation
500 m/s2 (11±1 ms)
Endurance
1,000 m/s2 ( 6 ±1 ms)
Weight
Approx. 1.9 g
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment.
The minimum switching load varies with the switching frequency and operation environment.
3
FBR12 SERIES
■ COIL DATA CHART
1.STANDARD
MODEL
Nominal
voltage
Nominal
Coil
current
resistance (at nominal
(±10%)
voltage)
approx.
Standard
-P type
FBR12ND03
FBR12ND03-P
3 VDC
64.3 Ω
46 mA
FBR12ND04
FBR12ND04-P
4.5 VDC
145 Ω
31 mA
NO
Must
operate1
voltage*
Must
operate1
voltage*
Nominal
power
Operate
power
Coil
temperature
rise
TF
OR
DE
FB
N
R1
SI
E
BE
2 S GN W
DI
E
SC RIE
ON
S
TIN TO
IE
D
FBR12ND05
FBR12ND05-P
5 VDC
178 Ω
28 mA
FBR12ND06
FBR12ND06-P
6 VDC
257 Ω
23 mA
FBR12ND09
FBR12ND09-P
9 VDC
579 Ω
15 mA
FBR12ND12
FBR12ND12-P
12 VDC
1,028 Ω
11 mA
FBR12ND24
FBR12ND24-P
24 VDC
2,880 Ω
8 mA
75% max. 10% min. Approx.
W
of nominal of nominal (at0.14
nominal
voltage
voltage
voltage)
Approx.
0.08 W
Max.
Approx.
20 deg
Max.
(at nominal
voltage)
0.2 W
0.112 W
30 deg
Nominal
power
Operate
power
Coil
temperature
rise
Approx.
0.13 W
Max.
Approx.
30 deg
(at nominal
voltage)
0.25 W
0.14 W
33 deg
Nominal
power
Operate
power
Coil
temperature
rise
Approx.
0.04 W
Max.
Approx.
4 deg
(at nominal
voltage)
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
2.HIGH DIELECTRIC STRENGTH
MODEL
Nominal
voltage
Nominal
Coil
current
resistance (at nominal
voltage)
(±10%)
approx.
Standard
-P type
FBR12WD03
FBR12WD03-P
3 VDC
39 Ω
77 mA
FBR12WD04
FBR12WD04-P 4.5 VDC
88 Ω
51 mA
FBR12WD05
FBR12WD05-P
5 VDC
108 Ω
46 mA
FBR12WD06
FBR12WD06-P
6 VDC
156 Ω
38 mA
FBR12WD09
FBR12WD09-P
9 VDC
352 Ω
25 mA
FBR12WD12
FBR12WD12-P
12 VDC
626 Ω
19 mA
FBR12WD24
FBR12WD24-P
24 VDC
2,304 Ω
10 mA
Must
operate1
voltage*
Must
release 1
voltage*
75% max. 10% min. Approx.
W
of nominal of nominal (at0.23
nominal
voltage
voltage
voltage)
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
3. HIGH SENSITIVITY TYPE
MODEL
Nominal
voltage
Coil
resistance
(±10%)
Standard
-P type
FBR12HD03
FBR12HD03-P
3 VDC
180 Ω
FBR12HD04
FBR12HD04-P
4.5 VDC
405 Ω
FBR12HD05
FBR12HD05-P
5 VDC
500 Ω
FBR12HD06
FBR12HD06-P
6 VDC
720 Ω
FBR12HD09
FBR12HD09-P
9 VDC
1,620 Ω
FBR12HD12
FBR12HD12-P
12 VDC
2,880 Ω
Must
operate1
voltage*
Must
release1
voltage*
80% max. 10% min. Approx.
W
of nominal of nominal (at0.05
nominal
voltage
voltage
voltage)
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
4
FBR12 SERIES
■ CHARACTERISTIC DATA
Maximum switching capacity
Range of operation temperature and voltage
Life curve
e
ltag
l vo
coi
ble
wa
allo
150
140
130
120
Operating voltage range
110
100
➀ AC resistive load
( AC contact rating)
➁ DC resistive load
( DC contact rating)
2.0
Contact load current (A)
160
➁
1.0
NO
➀
0.5
0.3
500
Service life (operations)
(DATA) assumes that
the maximum allowable temperature of
E type insulation
coil is 115˚C
um
xim
Ma
Nominal voltage multiplying factor (%)
(×104)
30 V DC resistive load
100
(–P)TYPE
50
125 V AC
resistive load
10
5
TF
OR
DE
FB
N
R1
SI
E
BE
2 S GN W
DI
E
SC RIE
ON
S
TIN TO
IE
D
90
80
rate
t ope
Mus
70
ge
volta
0.2
0.1
–10 0 10 20 30 40 50 60 70 80
10
20
30
125
50
(–P)TYPE
1
0.5
200
Contact load voltage (V)
Operating temperature (˚C)
1.0
1.5
2.0
Contact load current (A)
■ REFERENCE DATA
Distribution of operate and release voltage
Distribution of operate and release time
Distribution of contact resistance
100
60
80
Operate
Release
Operate
Release
50
80
30
20
Distribution (%)
Distribution (%)
Distribution (%)
60
40
60
40
40
20
20
10
0
0
10
20
30
40
50
60
70
80
0
0
1
Rated coil voltage multiplying factor (%)
2
3
4
5
6
7
8
■ DIMENSIONS
●Dimensions
0
10
20
30
40
50
60
70
●Schematics
(BOTTOM VIEW)
●PC board mounting hole layout
(BOTTOM VIEW)
7.2+0.3
1
3 4 5
12
10 9 8
3.2
9.7+0.3
14.6+0.4
80
Contact resistance (mΩ)
Time (ms)
5.08
0
(0.95)
0.50
5.08
0.25
(1.06)
5.08
2.54
2.54
8–
ø1
.00
✽SHOW ONE OUT
OF THBSB 3 DIMENSIONS (See NA)
●Tube carrier
500±2
15.6 Max.
10.6 Max.
Unit: mm
30 pcs/Tube
5
FBR12 SERIES
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info.marketing@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
NO
TF
OR
DE
FB
N
R1
SI
E
BE
2 S GN W
DI
E
SC RIE
ON
S
TIN TO
IE
D
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 07/26/2004.
6
Download PDF

advertising