Fujitsu | FTP-632MCL101 | User's Manual | Fujitsu FTP-632MCL101 User's Manual

24V DRIVE, 2-COLOR THERMAL PRINTER
3" TYPE MECHANISM
FTP-632MCL101/102/353/354
■ OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
■ HIGHLIGHTS
• 2 Color printing
It can print 2 colors: blue/ black or red/black
FTP-632MCL101
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing:
- blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
FTP-632MCL353
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replacement.
• Two paper paths
Front and bottom paper insertion is available.
FTP-622DCL/DSL4xx
1
FTP-632MCL101/102/353/354
■ PART NUMBERS
Name
Part Number
Printer Mechanism
FTP-632MCL101 (front paper insertion)
FTP-632MCL102 (bottom paper insertion)
Printer Mechanism
with Cutter
FTP-632MCL353 (front paper insertion)
FTP-632MCL354 (bottom paper insertion)
Interface Board
FTP-622DCL411*1 (Centronics standard)
FTP-622DSL438*2 (Gothic, Kanji, RS232C standard)
LSI (MCU)
FTP-622CU201*3
Interface
Cable
Parallel (Centronics)
FTP-441Y201
Serial (RS-232C)
FTP-622Y301
Power
FTP-622Y401
Head
FTP-622Y801 (FCC preassembled to mechanism)
Cable
*1: FTP-622DCL411 is ANK supported only
*2: FTP-622DSL438 has FLASH memory and can print high speed images
*3: Supports Kanji and parallel and serial interfaces
■ GENERAL SPECIFICATIONS
Item
Specifications
Part number
FTP-632MCL101/102
Printing method
Thermal-sensitive line dot method
Dot structure
576 dots/line
Dot pitch (Horizontal)
0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)
0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area
72 mm
Number of columns
ANK 36 columns (12X24 dot font max.)
Paper width
80mm± 0
Paper thickness
60 to 100 µ m (there may be exceptions)
Cutting type
---
Printing speed
100mm/s (800 dotlines/s maximum at black-white image batch printing
Character types
Alphanumeric KANA
International
JIS Kanji (Kanji CG loaded board)
Character,
dimensions(H×W),
number of
characters
Interface
1
12×24 dots,(1.5×3.0mm)
24×24 dots,(3.0×3.0mm)
8×16 dots,(1.0×2.0mm)
16×16 dots,(2.0×2.0mm)
FTP-632MCL353/354
ANK 48 columns (12X24 dot font max.)
0
85mm± 1
full or partial
:159
:195
:approx. 6800
48 columns
28 columns
72 columns
36 columns
Centronics / RS-232C standard
(Continued)
2
FTP-632MCL101/102/353/354
(Continued)
Item
Specifications
Part number
Power
supply
FTP-632MCL101/102
For head
24 VDC ±5% 2.3A
(24V Rav1500Ω, 25%printing ratio)
For printer motor
24VDC±5% 1A maximum
For cutter motor
---
For logic
5VDC±5% 0.5 A maximum
Printer Mechanism
108 (W) × 48 (D) × 20 (H) mm
---
Mechanism with cutter
---
117 (W) × 57 (D) × 38 (H) mm
Interface board
131 (W) × 89 (D) × 24 (H) mm
Printer Mechanism
Approximately 94g
---
Mechanism with cutter
---
Approximately 340g
Head
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard
driving method)
Wear resistance: 50 km (at 25% print ratio)
Cutter
----
Operating temperature
+5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
Operating humidity
20 to 85% RH (no condensation)
Storage temperature
–20 to +60°C (excluding paper)
Storage humidity
5 to 95% RH (no condensation)
Head temperature
By thermistor
Paper out/Mark detect
By photointerrupter
Head release
By slide switch
Dimensions
Weight
Life
Environmental
conditions
Detection
FTP-632MCL353/354
24VDC±5% 1A maximum
500,000 times minimum
2 color paper (blue/black) PB770 (Mitsubishi paper)
(red/black) PB670 (Mitsubishi paper)
Recommended
thermal sensitive
paper
High sensitivity paper
TF50KS-E4 (Nippon paper)
Standard paper
TF60KS-E (Nippon paper), FTP-030P0104(80mm)
PD150R (Oji paper), FTP-030P0701(80mm)
Medium term paper
TP60KS-F1 (Nippon paper), FTP-030P0102(80mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
3
FTP-632MCL101/102/353/354
■ FUNCTION
ITEM
ITEM
1.
Test printing
8.
Motor power save
2.
Paper-out detection
9.
Mark detection
3.
Paper near end detection
10.
MCU trouble detection
4.
Head-up detection
11.
Power on/off sequence protection
5.
Abnormal temp. of thermal head detection
12.
Motor protection
6.
Blown fuse detection
13.
Hardware timer
7.
Abnormal voltage detection of head
■ DIMENSIONS
1. Printer mechanism
FTP-632MCL101/102
PAPER INSERTION
(MCL101)
20.1
CENTER OF PAPER
3-MOUNTING HOLE
2-POSITIONIG HOLE
HEAD CONNECTOR
(250)
(FFC)
(CABLE)
(245)
76.8(POSITIONING HOLE)
PAPER INSERTION
(MCL102)
HEAD UP LEVER(AT HEAD DOWN)
21.0
JAPAN
30.5
47.5
.
FT
T
CAUTION
A
HOT
57.0
50.9
Unit: mm
(107.9)
2. Printer mechanism with cutter
MCL353
3
1
14.2
.
FT
41.9
JAPAN
12.1
(OUTER LENGTH
FO MOVABLE CUTTER)
2.5MAX
37.2
13.3
3
0.5
íçên…ÇêGÇÁà”Ç»¢ÇÇ≈∫âÇ≥Ç¢ÅB
MCL354
30
0
316
(FFC)
241
(SENSOR CABLE)
57.0
226
(MOTOR CABLE)
(116.9)
59.9
}1
Å
(73.1)
3-2orless
. JJAPAN
FT
T
Unit: mm
4
FTP-632MCL101/102/353/354
Interface board
105.4
87.6
9
2
CN3
30 29
1
CN9
1
CN5
1
21
(39.4)
78.7
CN2
1
(39.4)
5.1
41.8
21.8
CN1
4
CN8
1 1
CN7
4
5.1
33.2
86.4
105.4
5.1
120.7
5.1
Height of devices side
1.6
4-Ø3.6 ±0.1
5.0max
15.0max
Height of solder side
Unit: mm
5
FTP-632MCL101/102/353/354
■ CONNECTOR FOR THERMAL HEAD
1. Thermal Head
Head side : IL-FPC-28CLIP (JAE)
Board side : 52045 (Molex) or equivalent
*1: Symbol: "
" means a negative logic signal
Thermal head heat sink
Motor
Head up level
1, 2, 3, ......................................15, 16
Connector Pin No.
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
No.
Signal
Comment
Pulse motor driving B
1
VSEN
Power for paper sensor
B
Pulse motor driving B
2
PHE
Photo interrupter emittor
3
A
Pulse motor driving A
3
PHK
Photo interrupter cathode
4
A
Pulse motor driving A
4
SW1
Head up detect switch 1
5
SW2
Head up detect switch 2
No.
Signal
1
B
2
Comment
6
FTP-632MCL101/102/353/354
3. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
No
Cable Color
Name
1
White
Home position 1
2
White
Home position 2
3
Red
Motor energizing signal M+
4
Black
Motor energizing signal M-
■ FUNCTION
ITEM
ITEM
1.
Test printing
8.
Cutter trouble detection
2.
Paper-out detection
9.
Motor power save
3.
Paper near end detection
10.
Mark detection
4.
Head-up detection
11.
MCU trouble detection
5.
Abnormal temp. of thermal head detection
12.
Power on/off sequence protection
6.
Blown fuse detection
13.
Motor protection
7.
Abnormal voltage detection of head
14.
Hardware timer
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-622DCL4xx DATA SHEET and the FTP-622DCL4xx DATA SHEET for Interface,
Command, and Options.
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/22/2004.
7
Download PDF