imperial® hvac/r tools professional tools for hvac/r service

imperial® hvac/r tools professional tools for hvac/r service
P
OUDL
Y
R
N
AMERICA
PROFESSIONAL TOOLS FOR
IMPERIAL® HVAC/R TOOLS
HVAC/R SERVICE AND TUBE WORKING
SI
N C E 19 0
5
PROFESSIONAL TOOLS FOR HVAC/R
SERVICE AND TUBE WORKING
Imperial® Tools - Excellence and Innovation for Over 100 Years
ABOUT US
The Imperial ® brand was founded over 100 years ago on the south side of Chicago with
the formation of the Imperial Brass Manufacturing Company. Quickly establishing a
reputation as specialists in brass, Imperial designers developed the non-soldering
“flared fitting”, followed by the first patents for flaring tools and tube cutters. Over
the years the Imperial name came to stand for excellence and innovation, and the
product list grew to include tube fittings, tube working tools, refrigeration and air
conditioning service accessories, and associated products in the fluid connector field.
In September of 1996 the Imperial ® brand tools and accessories division was sold to
Stride Tool Inc. of Ellicottville, New York. Under Stride Tool’s leadership, the Imperial
brand has been strengthened and expanded to include not just specialty tools for
HVACR service and tube working, but also for electrical, automotive and industrial
applications. In 2004 a new facility was completed in northeast Ohio to centralize all
manufacturing and administrative operations.
Thermal Engineering
In 2012 Stride Tool acquired Thermal Engineering Company of Mentor, Ohio and their
line of HVACR service tools. The best of the Thermal Engineering offerings are now
sold under the Imperial-Thermal name and are included in this catalog.
Our goal is simple - to always exceed the expectations
of our professional customers.
TABLE OF CONTENTS
TUBE WORKING TOOLS
ELECTRICAL TOOLS
TUBE CUTTERS
3-8
STRIPPERS & CRIMPERS
75-78
TUBE BENDERS
9-16
NM-B CABLE TOOLS
79
FLARING & SWAGING
17-26
TUBING TOOL KITS
27-28
TUBING TOOL SELECTOR
29-30
GENERAL
MERCHANDISING
80
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
TUBING TOOL SELECTOR
ITEM#
PAGE#
101-F ............................... 8
TUBING TOOL SELECTOR
PART NO.
37˚ Flaring Tool
45˚ Flaring Tool
45˚ Double
Flaring Tools
Reaming and
Deburring Tools
Tube Constrictor
Swaging Tools
Metric Bubble
Flaring Tool
27
ACCESSORIES & WRENCHES
102-F-04 .......................... 7
TUBING TOOL SELECTOR
TOOL
Tube Cutters
Metal Tubing
Tube Cutters
Thermoplastic
Rubber Hose
Saw Vise
Bending Tools
2
3
1
3
3
4
4
2
2
4
4
5
5
4
8
8
8
8
8
12
13
12
12
9
9
9
9
9
8
8
8
7
11
14
10
10
14
19
20
18
19
18
18
21
20
20
26
15
15
15
22
22
15
15
15
15
15
16
16
16
555-FS
2000-FS
93-FB
195-FB
2000-FS
208-F
208-FSS
210-F
TC-1020
93-S
94-SSP
95-S
193-S
194-S
195-SA
275-FS
555-FS
2000-FS
293-F
21
26
17
17
26
31
31
31
2
24
24
24
24
24
24
22
21
26
21
ALPHA-INDEX
TUBE MATERIAL
COPPER
PAGE NO.
TC-1000
TC-1050
TC-1550
TC-2050
TC-3050
174-F
206-FB
227-FA
312-FC
406-FA
206-FBP
307-FP
327-FP
384-FA
101-F
102-F
112-F
163-F
201-F
260-FHA
270-F
350-FHA
360-FHA
364-FH
364-FHA
364-FHAM
364-FHB
364-FHBM
367-FH
368-FH
370-FH
470-FH
564-FH
600-F
664-FH
664-FH(Metric)
700-F
400-F
407-FA
437-FB
447-F
507-FB
507-FBM
555-FS
537-F
637-F
2000-FS
103-FS
195-FC
203-FA
275-FS
275-FSM
296-FC
300-FB
375-FS
376-FS
395-FAM
500-FC
500-FCM
525-F
SIZE RANGE
TUBE O.D. (in.)
1/8 - 1-1/8
1/8 - 5/8
1/8 - 1-1/8
3/16 - 7/8
1/8 - 1-1/8
3/8 - 1-1/8
3/8 - 2-5/8
1/8 - 3/4
1/4 - 1-5/8
2 - 4-1/8
3/8 - 2-5/8
1/16 - 1/2 (4)
1/8 - 13/16 (4)
1/8 - 1-1/2
1/4 - 5/8
1/4 - 7/8
1/4 - 3/8
1/4 - 5/8
1/4 - 7/8
1/4 - 7/8
3/8 - 1-1/8
1/4 - 3/4
3/8 - 3/4
1/8 - 3/16
1/4 - 1 (3)
6 - 12 mm
1/4 - 1/2
6 - 12 mm
1/8, 3/16, 1/4
3/16, 1/4, 5/16, 3/8
3/16, 1/4, 3/8, 1/2
3/16, 1/4, 5/16, 3/8
3/8, 1/2
1/4 - 3/4
1/4, 3/8, 1/2
6 - 12 mm
1/4 - 3/4
3/16 - 5/8
1/8 - 1-1/2
3/16 - 5/8
1/8 - 1/2
3/16 - 5/8
6 - 16 mm
3/16 - 5/8
3/4 - 1-1/4
1-1/4 - 2
1/8 - 3/4
3/4 - 1
3/16 - 5/8
5/8 - 1-1/8
1/8 - 3/4
4 - 22 mm
3/16 - 5/8
3/16 - 5/8
1/8 - 3/4
1/2 - 3/4
4 - 16 mm
3/16 - 5/8
6 - 16 mm
3/16 - 5/8
4. 75 - 16 mm
3/16 - 5/8
1/8 - 3/4
3/16 - 1/2
1/4 - 3/4
3/16 - 3/4
3/16 - 1-1/2
3/16 - 1-1/2
ANNEALED
GENERAL
PURPOSE
ttt
t
ttt
tt
tt
t
tt
tt
ttt
t
ttt
tt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
tt
tt
ttt
tt
t
1/8 - 1-1/8
3/16 - 7/8
1/2, 5/8, 7/8
3/16 - 5/8
1/4 - 5/8
1/2 - 7/8
1/4 - 5/8
3/16 - 3/4
3/16 - 5/8
3/16 - 3/4
4.75 - 10 mm
TYPE K
BENDING
TEMPER-HARD
SOFT
ttt
t
ttt
tt
tt
t
tt
tt
ttt
ttt
tt
tt
tt
ttt
tt
tt
ttt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
t
ttt
tt
ttt
tt
(5)
ttt
t
ttt
tt
tt
t
tt
tt
ttt
t
(5)
(5)
HARD
SOFT
(5)
(5)
tt
tt
ttt
tt
tt
t
t
t
tt
ttt
tt
tt
tt
ttt
tt
ttt
tt
t
ttt
tt
t
TYPE L
BENDING
TEMPER-HARD
ttt
t
ttt
tt
tt
t
tt
tt
ttt
ttt
tt
tt
tt
ttt
tt
tt
ttt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
tt
ttt
t
tt
tt
ttt
tt
t
t
t
tt
ttt
t
ttt
tt
tt
t
tt
tt
ttt
t
(5)
t
t
tt
ttt
t
ttt
tt
ttt
tt
ttt
tt
t
ttt
tt
t
HARD
tt
tt
ttt
tt
tt
t
(5)
TYPE M
tt
tt
ttt
tt
tt
t
(5)
t
t
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
t
tt
PART NO.
REFRIGERANT
PSI
GAUGE CALIBRATION**
BAR Kg/cm² kPa MPa
TEMP
°F
°C
CHARGING LINES
(BV = Low Loss Ball Valve Shut-Off )
···
·
····
·
···
·
····
···
···
·
···
···
·
····
···
···
··
·
··
·
···
·
· ·· ·
· ·· ··
·
· ···
··· ···
··· ···
·· ··
·· ··
····
···
·
····
··
·
··
· · ··
·
· ·· ·
·
···
8 0 0 S E R I E S D E E P D R A W 4 - V A LV E M A N I F O L D
MANIFOLDS REFERENCE GUIDES
44-48
R-134a
830-CKP*
830-CKPS* (w/Sight Glass)
831-CKP*
831-CKPS* (w/Sight Glass)
R-410A
840-C*
840-CB
840-CKPSC (w/Sight Glass)
841-C*
841-CKPSC (w/Sight Glass)
841-CM
842-C*
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-134a
R-134a
R-134a
R-134a
R-410A
R-410A
R-410A
R-410A
R-410A
R-410A
R-410A
R-410A, R-22, R-404A
844-C*
844-CS* (w/Sight Glass)
845-C*
846-C*
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-404A, R-507, R-134a
850-C*
851-C*
852-C*
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
853-C (w/Carrying Case)
R-404A, R-507, R-134a
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-404, R-407C, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-410A
R-410A
R-22, R-404A, R-507
6 0 0 S E R I E S 4 - V A LV E M A N I F O L D
R-12, R- 22, R-502
620-C*
620-CB
620-CK*
620-CKP*
620-CM*
620-CS* (w/Sight Glass)
621-C*
621-C-6
49
VACUUM GAUGES
50
HOSES
51-52
COUPLERS
53-54
ACCESSORIES & TOOLS
55-61
CHARGING SCALES
62
OIL PUMPS & ACCESSORIES
62
VACUUM PUMP ACCESSORIES
63-64
CHARGING CYLINDERS & ACC.
65-66
COMPRESSOR TOOLS
67-68
LEAK DETECTION
69-70
VOCATIONAL TRAINING UNITS
71-72
·
····
···
·
···
····
·
··
4-60” (3/8” VAC)
4-72” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
3-60” w/Low Loss Fittings,
1-60” 3/8” VAC Line
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (3/8” VAC)
4-60” (B, R, Y 5/16”;
3/8” VAC)
4-60” (B, R 1/4” x 5/16”;
Y 1/4” x 1/4”; 3/8” VAC)
3-60” w/(BV),
1-60” 3/8” VAC Line
4-60” (3/8” VAC)
4-60” (3/8” VAC)
3-60” w/(BV)
1-60” 3/8” VAC Line
4-60” (3/8” VAC)
3-60” w/Low Loss Fittings,
1-60” 3/8” VAC Line
4-60” (3/8” VAC)
MANIFOLD PORT
CONNECTIONS
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
5/16” & 3/8” SAE
1/4” & 3/8” SAE
5/16” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
700 SERIES KWIK-CHARGER™ MANIFOLD
R-410A, R-22, R-404A
715-CC
717-CC
718-CC
R-12, R-22, R-502
720-CC
721-CC
725-CC
R-404, R-407C, R-134a
740-CBC
R-404A, R-507, R-134a
750-CC
751-CC
755-CC
R-410A
745-CBC
745-CKPC
R-22, R-404A, R-507
762-CKPC
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
* Add “C” suffx for clamshell packaging
* *All gauges available with MPa, kPa, Bar, etc.
GAUGES
·
3-60”
3-60” w/(BV)
·
·
··
·
···
3-60”
3-60” w/Low Loss Fittings
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
3-60”
3-60” w/Low Loss Fittings
3-60” (1/4” x 5/16”)
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
3-60”
1/4” SAE
4-60” (3/8” VAC)
4-72” (3/8 VAC)
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
40
PAGE#
ITEM#
PAGE#
195-FC ........................... 15
195-SA ........................... 24
19-C ..........................38, 43
ITEM#
PAGE#
270-F-08 ........................ 13
270-F-10 ........................ 13
270-F-12 ........................ 13
ITEM#
PAGE#
335-CKP ......................... 37
336-CKP ......................... 37
341-C ............................. 46
19WA ............................. 80
270-F-14 ........................ 13
3423-IP .......................... 41
1W ................................. 79
270-F-16 ........................ 13
3425-CIP ........................ 41
195-F 12......................... 32
195-F 12 mm ................. 32
195-F 13......................... 32
195-F 13 mm ................. 32
195-F 14......................... 32
1W393 ........................... 78
2000-FS.......................... 26
201-F ............................... 8
203-FA ........................... 15
205-MRS ........................ 42
270-F-18 ........................ 13
275-FS............................ 22
275-FSC.......................... 26
275-FSCD ....................... 26
275-FSM ........................ 22
345-FA ........................... 29
350-FHA ......................... 12
360-FHA ......................... 12
364-FH-02........................ 9
364-FH-03........................ 9
195-F 14 mm ................. 32
206-FB ............................. 4
278-FS-03X04X06 .......... 22
364-FHA-04 ..................... 9
195-F 15......................... 32
206-FBP ........................4, 5
278-FS-08 .................22, 24
364-FHA-05 ..................... 9
195-F 15 mm ................. 32
195-F 16......................... 32
195-F 16 mm ................. 32
195-F 17......................... 32
195-F 17 mm ................. 32
206-MRS ........................ 42
208-F ............................. 31
208-FSS.......................... 31
20-A ..........................38, 43
20WA ............................. 80
278-FS-10 .................22, 24
278-FS-12 ...................... 22
278-FS-14 ...................... 24
278-FS-8 ........................ 22
278-FSM-12 ................... 22
364-FHA-06 ..................... 9
364-FHA-07 ..................... 9
364-FHA-08 ..................... 9
364-FHA-10 ..................... 9
364-FHA-12 ..................... 9
195-F 18......................... 32
210-F ............................. 31
278-FSM-14 ................... 22
364-FHA-14 ..................... 9
195-F 18 mm ................. 32
21-H ............................... 38
278-FSM-15 ................... 22
364-FHA-16 ..................... 9
175EX22 ......................... 23
175EX26 ......................... 23
175EXC ........................... 23
175EXP........................... 23
17-C ............................... 43
195-F 19......................... 32
195-F 19 mm ................. 32
195-F 20......................... 32
195-F 21 mm ................. 32
195-F 22......................... 32
21-L ............................... 38
21WA ............................. 80
227-FA ............................. 2
23-C ............................... 43
241-F-03 ........................ 45
278-FSM-16 ................... 22
278-FSM-18 ................... 22
278-FSM-22 ................... 22
278-FSM-4-6-10 ............ 22
278-FSM-8 ..................... 22
364-FHAM-10 mm ........... 9
364-FHAM-12 mm ........... 9
364-FHAM-6 mm ............. 9
364-FHAM-8 mm ............. 9
364-FHB-04 ..................... 9
17WA ............................. 80
195-F 22 mm ................. 32
241-F-04 ........................ 45
27-C ............................... 43
364-FHB-05 ..................... 9
18-C ............................... 43
195-F 23 mm ................. 32
241-F-05 ........................ 45
293-F ............................. 21
364-FHB-06 ..................... 9
126-C ............................. 30
127-C ............................. 30
127-CO ........................... 30
12-C ............................... 46
18WA ............................. 80
193-S ............................. 24
194-S ............................. 24
195-5STDM KIT .............. 32
195-7STDS KIT................ 32
195-F 24......................... 32
195-F 24 mm ................. 32
195-F 26......................... 32
195-F 27 mm ................. 32
195-F 28......................... 32
241-F-06 ........................ 45
2423-P ........................... 41
2425-CP ......................... 41
24-C ............................... 43
25-H ............................... 38
294-F ............................. 21
296-FC ........................... 15
2W ................................. 79
2W393 ........................... 78
300-FB ........................... 15
364-FHB-07 ..................... 9
364-FHB-08 ..................... 9
364-FHBM-10 mm ........... 9
364-FHBM-12 mm ........... 9
364-FHBM-6 mm ............. 9
140-F-04 ........................ 29
195-F 05......................... 32
195-F 30......................... 32
25-K ............................... 43
300-RH........................... 40
364-FHBM-8 mm ............. 9
140-F-06 ........................ 29
195-F 06......................... 32
195-F 30 mm ................. 32
25-L ............................... 38
300-RL ........................... 40
367-FH ............................. 8
140-F-08 ........................ 29
MANIFOLDS
ITEM#
195-F 09 mm ................. 32
195-F 10......................... 32
195-F 10 mm ................. 32
195-F 11......................... 32
195-F 11 mm ................. 32
175EX06 ......................... 23
175EX08 ......................... 23
175EX10 ......................... 23
175EX12 ......................... 23
175EX14 ......................... 23
175EX16 ......................... 23
175EX18 ......................... 23
1226-FA ......................... 25
122-FA ........................... 25
123-C ............................. 30
123-FA ........................... 25
124-C ............................. 30
124-FA ........................... 25
125-C ............................. 30
140-F-10 ........................ 29
SERVICE MANIFOLDS REFERENCE GUIDE
PAGE#
14WA ............................. 80
15WA ............................. 80
163-F ............................... 8
16-C ............................... 43
16WA ............................. 80
174-F ............................... 4
175EX ............................. 23
11WS ............................. 78
120-F ............................. 25
140-F-12 ........................ 29
37-43
ITEM#
140-F-22 ........................ 29
140-F-26 ........................ 29
142-F ............................. 29
144-F ............................... 6
144FB............................... 6
109W ............................. 80
10-C ............................... 46
10SG .............................. 40
112-F ............................... 8
11W ............................... 79
95
31-34
R-12, R-22, R-502
820-C*
820-CB
820-CK*
820-CKP*
820-CM*
820-CS* (w/Sight Glass)
821-C*
821-C-6
821-CD*
821-CK*
821-CKP*
821-CM*
821-CS* (w/Sight Glass)
822-C (w/Carrying Case)
822-CKP (w/Carrying Case)
829-C*
81-84
102-F-08 .......................... 7
102-F-10 .......................... 7
102-F-12 .......................... 7
102-F-14 .......................... 7
103-FS............................ 15
105-FF............................ 29
105W ............................. 80
13W ............................... 79
t
tt
(1) Heavy duty cutting wheel No. S75046 is recommended for continuous service with steel, stainless steel, monel, titanium and hard temper copper tubing.
(2) Type M tubing should be torch annealed before flaring.
(3) No.364-FHA, 5/8” - 1” size should be used only with annealed (softened) non-ferrous tubing.
(4) Not to be used with metal reinforced hose.
(5) When cutting metallic tubing you must switch to standard wheel furnished.
REFRIGERATION AND
AIR-CONDITIONING PRODUCTS
MANIFOLDS
102-F-05 .......................... 7
102-F-06 .......................... 7
102-F-07 .......................... 7
195-F 07......................... 32
195-F 07 mm ................. 32
195-F 08......................... 32
195-F 32......................... 32
195-F 32 mm ................. 32
195-F 34......................... 32
25W ............................... 77
260-FHA ......................... 12
26-C ............................... 43
307-FP ............................. 5
30W ............................... 79
312-FC ............................. 2
368-FH ............................. 8
370-FH ............................. 8
375-FS............................ 15
140-F-14 ........................ 29
195-F 08 mm ................. 32
195-F 36......................... 32
26W ............................... 77
31W ............................... 79
376-FS............................ 15
140-F-18 ........................ 29
195-F 09......................... 32
195-FB ........................... 17
270-F-06 ........................ 13
327-FP ............................. 5
384-FA ............................. 4
TUBE WORKING TOOLS
1
2
TUBE CUTTERS
For hard or soft copper, aluminum, brass, thin wall
steel, stainless steel, monel, titanium and other tubing.
METAL TUBING
TC-1550 HI-DUTY® TUBE CUTTER
For 1/8" to 1-1/8" (4 mm to 28 mm) O.D. tubing.
• Lower profile swing radius – 4-1/4" max.
• Retractable rotary style reamer – can be used right- or left-handed, and with a clockwise
or counterclockwise motion for better ergonomic control.
Self-cleaning burr
• Rollers feature flare cut-off groove to reduce tube loss when damaged flare is removed.
removal groove
• Lightweight die-cast solid aluminum body – lighter than similar cutters.
• Durable low gloss black wrinkle finish for improved wear resistance.
• Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting
action and trouble-free operation.
• Unique design eliminates spiraling for clean right angle cuts.
4-1/4” Low profile
• Our high precision machining and construction method permits
swing radius
one-piece screw-type axle for easy access to cutter wheel –
no clip to lose or replace.
• Imperial® cutter wheels are made of the highest quality wear and abrasion-resistant
chromium steel and precision machined to exacting specifications for accurate cutting
and long life. Each tool is supplied with a spare cutter wheel.
• All Imperial tube cutters are 100% factory tested to ensure accurate spiral-free cutting.
• Available in “Try Me” clamshell packaging.
Retractable rotary
deburrer
TC-1550
Lightweight
aluminum body
TC-1550 For 1/8" to 1-1/8" (4 mm to 28 mm) O.D. tubing.
Includes (2) S75015 general purpose cutter wheels.
Length 5". Wt. 8.0 oz.
TC-1560 For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing.
Includes (2) S75046 cutter wheels for continuous cutting of
stainless steel, monel and other hard temper tubing.
Length 5”. Wt. 8.0 oz.
S75015 General purpose cutter wheel.
S75046 Wheel for continuous cutting of stainless steel, monel and
other hard temper tubing.
S10001087 Deburr replacement blade.
S74844 Screw for extra cutter wheel in knob.
Enclosed steel thrust
bearing for smooth
cutting
S10001087 -Deburr Replacement Blade
TC-1550C
3
TUBE CUTTERS
For hard or soft copper, aluminum, brass, thin wall
steel, stainless steel, monel, titanium and other tubing.
METAL TUBING
HI-DUTY® TUBE CUTTERS
For 1/8” to 1-1/8” and 1/4” to 1-5/8” O.D. tubing.
• Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting action and trouble free operation.
• Unique design eliminates spiraling for clean right angle cuts. Our high precision machining and construction method
permits one-piece screw-type axle for easy access to cutter wheel – no clip to lose or replace.
• Rugged aluminum alloy body designed for handling ease. Body is hand buffed and nickel chrome plated to a high-luster finish.
• Foldaway hardened steel reamer with turned cutting edge removes inside burrs cleanly. Filing surface removes outside burrs.
• Rollers feature flare cut-off groove to reduce tube loss when damaged flare is removed.
• Imperial® cutter wheels are made of the highest quality wear and abrasion-resistant chromium steel and precision machined
to exacting specifications for accurate cutting and long life. Each tool is supplied with a spare cutter wheel.
• All Imperial tube cutters are 100% factory tested to ensure accurate spiral-free cutting.
TC-1000
TC-1010
TC-1020
312-FC
For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing.
Includes (2) S75015 general purpose cutter wheels.
Length 5”. Wt. 8.8 oz.
For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing.
Includes (2) S75046 cutter wheels for continuous cutting of
stainless steel, monel and other hard-temper tubing.
Length 5”. Wt. 8.8 oz.
Combination tube constrictor & tube cutter. For 1/8”
to 1-1/8” (4 mm to 28 mm) O.D. tubing. Includes S76637
constrictor wheel and S75015 general purpose cutter wheel.
Length 5-1/2”. Wt. 8.8 oz.
For 1/4” to 1-5/8” (7 mm to 41 mm) O.D. tubing.
Includes (2) S75015 general purpose cutter wheels.
Length 5-1/2”. Wt. 10.4 oz.
TC-1000
S75015 General purpose cutter wheel.
S75046 Wheel for continuous cutting of stainless steel, monel and
other hard temper tubing. For cutters TC-1000, TC-1010,
TC-1550, TC-1560, 312-FC, 174-F, TC-2050 and TC-3050.
S16003162 Replacement cutter wheel for soft copper & aluminum
tubing is extra sharp to minimize burr buildup.
S76637 Constrictor wheel for producing sweat joints.
Conforms to Federal Specification GGG-C-771d, Type II, Class I.
TC-1010
312-FC
TC-1020 TUBE
CONSTRICTOR
FOLDAWAY REAMER
Hardened steel reamer with turned
FLARE CUT-OFF GROOVE
Groove in rollers reduces tube loss when cutting edge removes inside burrs cleanly.
Filing surface removes outside burrs.
cracked flare is removed.
SPARE CUTTING WHEEL
Spare cutter wheel carried under
foldaway locking reamer.
FILL WITH SOLDER
Joint is ready for sweating when
constricted tube contacts smaller tube.
Can be used for crimping applications.
JUNIOR TUBE CUTTER
For 1/8” to 3/4” (4 mm to 19 mm) O.D. tubing.
227-FA
Includes S32633 general purpose cutter wheel. Swing radius 2”.
Length 3-1/2”. Wt. 5.0 oz.
227-FA
4
TUBE CUTTERS
For hard or soft copper, aluminum, brass, thin wall
steel, stainless steel, monel, titanium and other tubing.
METAL TUBING
“IMP”® MINI TUBE CUTTERS
For 1/8” to 5/8”, 3/16” to 7/8” and 1/8” to 1-1/8” O.D. tubing.
• Big capacity, small size tube cutters designed for use in tight quarters where other cutters won’t fit.
• Enclosed feed screw minimizes contamination assuring continued smooth operation.
• Corrosion-resistant steel rollers positioned at bottom of cutter allow for easier cutter
engagement on tubing and smoother cutting action.
• All Imperial® tube cutters are 100% factory tested to ensure accurate spiral-free cutting.
Swing Radius
1-1/4”
TC-1050
TC-1050
S32633
S26883
TC-2050
TC-3050
S75015
S74762
For 1/8” to 5/8” (4 mm to 15 mm) O.D. tubing. Includes (1) S32633
general purpose cutter wheel. Swing radius 1-1/4” (1-3/8” swing radius
with 5/8” tube). Length 1-3/4”. Wt. 2.5 oz.
Our Newest “IMP”®
General purpose cutter wheel for TC-1050.
tube cutter can cut
Screw for TC-1050 cutter wheel.
1/8” to 1-1/8” O.D.
tubing in tight
For 3/16” to 7/8” (5 mm to 22 mm) O.D. tubing. Includes (1) S75015
quarters
general purpose cutter wheel. Swing radius 1-11/16”.
Length 2-1/4”. Wt. 4.0 oz.
For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing. Includes (1) S75015
general purpose cutter wheel. Swing radius 2-1/2” (2-1/16” swing radius
with 1-1/8” tube). Length 3”. Wt. 7.0 oz.
General purpose cutter wheel.
Use cutter with or without
Screw for TC-3050 cutter wheel.
patented ratcheting handle RATCHETING TUBE CUTTERS
snaps into place in seconds
Taller knob height
for easier torque
TC-3050
Handle completes
revolutions with ease
TC-3050RH includes a
removable deburr tool
For 1/8” to 5/8” and 1/8” to 1-1/8” O.D. tubing.
•Easily completes a full revolution, maximizing leverage.
•Cutter can easily be removed from the handle.
•Ergonomic handle with non-slip grip.
•100% factory tested to ensure accurate spiral-free cutting.
•Six independent drive pawls provide 15° arc-swing.
•Includes (1) general purpose cutter wheel.
Ergonomic handle
with non-slip grip
TC-1050RH For 1/8” to 5/8” (4 mm to 15 mm) O.D. tubing.
2-Pc. set includes TC-1050 “IMP”® mini tube cutter and
ratcheting handle in clamshell packaging. Length 5”. Wt. 6.0 oz.
TC-1051 Ratcheting handle only. Length 5”. Wt. 1.5 oz.
TC-3050RH For 1/8” to 1-1/8” (4 mm to 28 mm) O.D. tubing.
3-Pc. set includes TC-3050 “IMP”® tube cutter, removable
deburr tool and ratcheting handle in clamshell
packaging. Length 7”. Wt. 11.5 oz.
TC-3051 Ratcheting handle and deburr tool. Length 7”. Wt. 4.0 oz.
Ideal for tight spaces
Spiral-free cutting
TC-3050RH
Six independent drive
pawls give small,
15° arc-swing
Removable Deburr Tool
(TC-3050RH and TC-3051)
TC-1050RH
5
TC-3050RH
TUBE CUTTERS
For hard or soft copper, aluminum, brass, thin wall
steel, stainless steel, monel, titanium and other tubing.
METAL TUBING
BIG “IMP”® TUBE CUTTER - “Big capacity in small size”
174-F
For 3/8” to 1-1/8” (10 mm to 28 mm) O.D. tubing.
174-F
Includes (2) S75015 general purpose cutter wheels. Swing radius
1-15/16” (2-1/4” swing radius with 1-1/8” tube). Length 2-11/16”.
Wt. 5.0 oz.
Swing Radius
1-15/16”
S75015 - Spare cutting wheel
ADJUST-O-MATIC™ TUBE CUTTERS
For 3/8” to 2-5/8” and 2” to 4-1/8” O.D. tubing.
• Ratchet feed mechanism speeds up cutting operation.
• Extra wide rollers with flare cut-off groove stabilize tubing.
• Spare cutting wheel included under handle cap.
• Enclosed screw-type feed mechanism; lightweight aluminum alloy body.
206-FB
206-FBP
406-FA
For 3/8” to 2-5/8” (10 mm to 66 mm) O.D. tubing. Includes (2) S74761
general purpose cutter wheels. Length closed 7-3/4”. Wt. 2.0 lbs.
Cuts schedule 40 PVC pipe up to 2”. Includes one cutter wheel for PVC S10000770
and one general purpose cutter wheel S74761.
For 2” to 4-1/8” (51 mm to 104 mm) O.D. tubing. Includes (2) S74833
general purpose cutter wheels. Length closed 11-1/4”. Wt. 3.5 lbs.
Conforms to Federal Specification GGG-C-771d, Type II, Class I.
406-FA
RATCHET FEED
Ratchet release opens cutter instantly
to maximum size.
RATCHET FEED
Push on handle to slide cutter wheel to
tubing. Rotate handle for fine adjustment.
FLARE CUT-OFF GROOVE
Wide flare cut-off groove in rollers to
accommodate flares on large size tubing.
TUBE SAWING VISE
Grips tube or hose securely for perfect right angle cuts.
Designed for stainless steel tubing that requires flaring.
Excellent for holding stainless steel tubing and wire
braided hose when cutting with a hacksaw. Quick clamp
adjustment with instant tube release. Replaceable
hardened steel hacksaw guides. Fastens on bench or
clamp in vise. Size: 5” x 3-1/8” x 5-1/8”. Wt. 2.5 lbs.
Conforms to Federal Specification GGG-V-436d.
SPARE CUTTING WHEEL
Spare cutter wheel included in
handle under snap-off cap.
• Push down.
Clamping block
holds tube.
For 1/8” to 1-1/2” (4 mm to 38 mm) O.D. tubing.
384-FA
206-FB
• Fast ratchet clamping action.
• Press release
to remove tube.
384-FA
6
TUBE CUTTERS
PVC, PLASTIC AND NON-METAL REINFORCED TUBING
PLASTIC TUBE AND HOSE SHEARS
For 1/16” to 13/16” (1 mm to 20 mm) O.D. hose* or tubing.
307-FP Snimp™ Compact shear for 1/16” to 1/2” (1 mm to 13 mm) O.D. plastic tubing and
non-metal reinforced hose. Spring loaded for safety - closes automatically.
Includes S8115601 replaceable hardened steel blade. Length 2-7/8”. Wt. 1.0 oz. each.
Comes in 12-pc. pop-up counter display. 9”D x 12”W x 12”H.
327-FPFor 1/8” to 13/16” (4 mm to 20 mm) O.D. plastic tubing and non-metal
reinforced hose. Can be wall- or bench-mounted for production, or carried in
a toolbox. Includes S77615 replaceable hardened steel blade.
Length 9-3/4”. Wt. 1.0 lb.
307-FP
* Not for use with metal reinforced hose.
307-FP POP-UP DISPLAY
327-FP
ADJUST-O-MATIC™ PVC PIPE CUTTER
206-FBP
Cuts schedule 40 PVC pipe up to 2”. Ratchet feed mechanism speeds up cutting
operation. Includes one cutter wheel for PVC S10000770 and one general purpose
cutter wheel S74761.
RATCHET FEED
Ratchet release opens cutter instantly
to maximum size.
RATCHET FEED
Push on handle to slide cutter wheel to
tubing. Rotate handle for fine adjustment.
FLARE CUT-OFF GROOVE
Wide flare cut-off groove in rollers to
accommodate flares on large size tubing.
SPARE CUTTING WHEEL
Spare cutter wheel included in
handle under snap-off cap.
206-FBP
7
TUBE CUTTERS
METAL TUBING
144-F IMPERIAL® TUBE CUTTER SERVICE CENTER
For 1/8” to 4-1/8” O.D. tubing.
Selling Imperial® replacement cutter wheels, reamer blades and fasteners
is easy. Our Service Center organizes a popular selection of replacement parts
for Imperial cutters. Display on the counter or bring it with you when making
sales calls.
• 15 most common replacement parts stocked in one handy container.
• Includes a visual replacement chart for quick and easy identification.
144-F
144-F SERVICE CENTER INCLUDES:
PART NO.
S75015
S75046
S32633
S74761
S74762
S74833
S26883
S77511
S74834
S76637
S16003162
S10000770
S7931801
S8201501
S74197
144-FB
QUANTITY
10
5
10
5
5
3
3
3
3
3
5
3
3
3
3
1
DESCRIPTION
CUTTER
General Purpose Cutter Wheel
Cutter Wheel for Stainless Steel
Cutter Wheel
Cutter Wheel
Cutter Wheel Retaining Screw
Cutter Wheel
Cutter Wheel Retaining Screw
Cutter Wheel Retaining Screw
Cutter Wheel Retaining Screw
Constrictor Roller Wheel
Cutter Wheel for Soft Copper Only
Cutter Wheel for PVC
Reamer Blade
Retaining Screw for Reamer Blade
Spring Washer for Reamer Blade
Container only
TC-1000, TC-1010, TC-1550, TC-1560, 312-FC, 174-F, TC-2050, TC-3050
TC-1000, TC-1010, TC-1550, TC-1560, 312-FC, 174-F, TC-2050, TC-3050
TC-1050, 227-FA
206-FB, 206-FBP
TC-1000, TC-1010, TC-1550, TC-1560, 312-FC, 174-F, TC-2050, TC-3050
406-FA
TC-1050
206-FB, 206-FBP
406-FA
TC-1000, TC-1010, TC-1020, 312-FC
TC-1000, TC-1010, TC-1550, C-1560, 312-FC, 174-F, TC-2050, TC-3050
206-FB, 206-FBP
TC-1000, TC-1010, 312-FC
TC-1000, TC-1010, 312-FC
TC-1000, TC-1010, 312-FC
PARTS CONTENTS CHART:
CUTTER WHEEL
Part# S74833
for Cutter # 406-FA
CUTTER WHEEL FOR PVC
Part# S10000770
for Cutters # 206-FB, 206-FBP
CUTTER WHEEL
Part# S74761
for Cutters # 206-FB, 206-FBP
CUTTER WHEEL FOR STAINLESS STEEL
Part# S75046
for Cutters # TC-1000, TC-1010, TC-1550,
TC-1560, 312-FC, 174-F, TC-2050, TC-3050
CUTTER WHEEL
Part# S32633
for Cutters # TC-1050, 227-FA
SPRING WASHER FOR REAMER BLADE
Part# S74197
for Cutters # TC-1000, TC-1010,
TC-1020, 312-FC
CUTTER WHEEL RETAINING SCREW
Part# S77511
for Cutters # 206-FB, 206-FBP
CUTTER WHEEL RETAINING SCREW
Part# S74762
for Cutters # TC-1000, TC-1010, TC-1550,
TC-1560, 312-FC, 174-F, TC-2050, TC-3050
RETAINING SCREW
FOR REAMER BLADE
Part# S8201501
for Cutters # TC-1000, TC-1010,
TC-1020, 312-FC
GENERAL PURPOSE CUTTER WHEEL CUTTER WHEEL FOR SOFT COPPER ONLY
Part# S75015
Part# S16003162
for Cutters # TC-1000, TC-1010, TC-1550, for Cutters # TC-1000, TC-1010, TC-1550,
TC-1560, 312-FC, 174-F, TC-2050, TC-3050 TC-1560, 312-FC, 174-F, TC-2050, TC-3050
REAMER BLADE
Part# S7931801
for Cutters # TC-1000, TC-1010,
TC-1020, 312-FC
CUTTER WHEEL RETAINING
SCREW
Part# S26883
for Cutter # TC-1050
CONSTRICTOR ROLLER WHEEL
Part# S76637
for Cutters # TC-1000, TC-1010,
TC-1020, 312-FC
CUTTER WHEEL RETAINING SCREW
Part# S74834
for Cutter # 406-FA
8
TUBE BENDERS
For bending soft copper, aluminum, brass, thin wall steel, thin wall stainless steel and other tubing.
TRIPLE HEAD LEVER TYPE
470-FH TRIPLE HEAD 180° TUBE BENDER WITH
ROTO-LOK™ INDEXING HANDLE
• Bends 3/16”, 1/4”, 5/16” and 3/8” O.D. tubing.
• Patented, quick-action indexing lever repositions two-stage handle midway through
bend when both handles begin to meet. This feature allows easy fabrication of
bends up to 180° with reduced effort, better control and no crossing of handles!
• Optimum bending radius – for each tubing size.
• Calibrated markings – for making accurate left-hand, right-hand and offset bends.
• Compact design for working in tight spaces.
• Cushion grips – for comfort and stability.
• Made of lightweight, die-cast aluminum.
• Clamshell packaging available.
Patented Roto-Lok™ Indexing Lever Smooth, tight 180˚ bends with
TUBE O.D. (in.)
RADIUS TO CENTER OF TUBE (in.)
less effort and improved control
3/169/16
1/4
9/16
5/16
11/16
3/8
15/16
Deluxe cushion grips for
comfort and stability
Lightweight die-cast aluminum
Bends 3/16”, 1/4”, 5/16”
and 3/8” O.D. tubing
470-FH
Fixed tube hook
PULL TRIGGER TO
RELEASE HANDLE
BEND TO 90°
9
MOVE HANDLE TO START SECOND BEND
LOWER HANDLE TO COMPLETE BEND
TUBE BENDERS
For bending soft copper, aluminum, brass, thin wall steel, thin wall stainless steel and other tubing.
TRIPLE HEAD LEVER TYPE
370-FH
370-FH TRIPLE HEAD 180° TUBE BENDER
• Bends 3/16”, 1/4”, 3/8” and 1/2” tubing.
• Makes smooth, tight-radius 180° bends.
• Calibrated markings - for making accurate left-hand, right-hand and
offset bends.
• Adjustable hook.
• Optimum bending radius - for each tubing size.
• Cushion grips - for extreme comfort.
• Made of lightweight die-cast aluminum.
• Clamshell packaging available.
370-FH
Bend 3 of the most popular
sizes of soft copper,
aluminum and thin wall
steel tubing with one
rugged, precise tool!
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE (in.)
3/16
1/4
3/8
1/2
11/16
11/16
1-1/8
1-1/2
Easy 180° bends in one swift motion
IMP™ TRIPLE HEAD BENDERS
For soft copper, aluminum and thin wall steel tubing.
For 1/8”, 3/16”, 1/4”, 5/16” and 3/8” O.D. tubing.
Makes up to 90° bends.
Calibrated markings for making accurate left-hand, right-hand and offset bends.
90° start requires less effort – making bending fast and easy.
367-FH
368-FH
For 1/8”, 3/16” and 1/4” (3 mm, 4 mm and 6 mm) O.D. tubing. Wt. 0.5 lbs.
For 3/16”, 1/4”, 5/16” and 3/8” (6 mm and 8 mm) O.D. tubing. Wt. 1.0 lbs.
367-FH
368-FH
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE
(in.)
(mm)
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE
1/85/8
3/1619/32
1/49/16
16
15
14
(in.)
3/161-1/64
1/41-1/64
5/161
3/815/16
SPRING TYPE TUBE BENDERS
(mm)
26
26
25
24
367-FH
368-FH
102-F-08
For soft copper and aluminum tubing.
For 1/4” to 7/8” O.D. tubing.
PART NO.
Tools allow hand bending of soft tubing to any shape without collapsing walls. Special
spring steel, zinc finish. End belled for quick tube removal.
102-F-04 1/410 3
102-F-05 5/1610 3
201-F
101-F
163-F
112-F
102-F-06 3/810 4
102-F-07 7/1612 6.25
102-F-08 1/212 6.5
102-F-10 5/812 8
102-F-12 3/412 10
102-F-14 7/812 10
Set of 8 benders for 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”, 3/4” and
7/8” O.D. tubing.
Set of 6 benders for 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” O.D. tubing.
Set of 4 benders for 1/4”, 3/8”, 1/2” and 5/8” O.D. tubing.
Set of 3 benders for 1/4”, 5/16” and 3/8” O.D. tubing.
TUBE O.D. (in.) LENGTH (in.) WEIGHT EACH (OZ.)
Each tool bends only one size.
10
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
LEVER TYPE
364-FHA LEVER TYPE TUBE BENDERS
For 1/8” to 1” and 6 mm to 12 mm O.D. tubing.
Each tool bends one size. Open-side type which slips over tube at any point. Makes
smooth, tight radius bends up to 180° with minimum effort. No scoring or flattening
of tubing. Calibrated to show angle of bend. Wide hook grips tubing securely.
PART NO.
TUBE O.D. (in.)
RADIUS
TO CENTER OF TUBE (in.)
364-FHA-14
Features telescopic handles
for increased leverage.
Expandable style furnished
for 7/8” and 1” O.D. tubing.
WEIGHT EACH (lbs.)
364-FH-021/8 3/8
364-FH-033/16 7/16
364-FHA-041/4 9/16
364-FHA-055/16 11/16
364-FHA-063/8 15/16
364-FHA-077/16 1-1/2
364-FHA-081/2 1-1/2
364-FHA-10*5/8 2-1/4
364-FHA-12*3/4
3
364-FHA-14*7/8
3
364-FHA-16*1 3-1/2
0.5
0.5
1.0
1.0
1.75
3.5
3.5
5.5
7.0
10.5
10.5
Each tool bends only one size.
Conforms to Federal Specification GGG-B-191a Type III, Class 2.
* For bending annealed copper and aluminum tubing only.
364-FHA-06
Style for 1/4” through 1/2” and
6 mm to 12 mm O.D. tubing.
METRIC SIZE BENDING TOOLS
PART NO.
TUBE O.D.
(mm)
364-FHAM-6MM
364-FHAM-8MM
364-FHAM-10MM
364-FHAM-12MM
6
8
10
12
RADIUS TO CENTER OF TUBE
(mm)
WEIGHT EACH
(inches)
(kg.)
(lbs.)
14.2 9/16 0.451.0
17.5 11/16 0.451.0
24.0 15/16 0.791.75
38.1 1-1/2 1.63.5
Each tool bends only one size.
364-FH-02
364-FHA-10
Style for 1/8” and 3/16” O.D. tubing.
Style for 5/8” and 3/4” O.D. tubing.
364-FHB SWIVEL HANDLE TUBE BENDERS
For 1/4” to 1/2” and 6 mm to 12 mm O.D. tubing.
The 364-FHB series has a swivel handle that can be repositioned midway through
a bend when both handles begin to meet. This simple feature allows easy fabrication of
bends up to 180° with reduced effort, better control and without the crossing of handles,
typical of most other lever type benders.
PART NO.
TUBE O.D. (in.)
RADIUS
TO CENTER OF TUBE (in.)
364-FHB-041/4
364-FHB-055/16
364-FHB-063/8
364-FHB-077/16
364-FHB-081/2
364-FHB-06
Style for 1/4” through 1/2” and
6 mm to 12 mm O.D. tubing.
WEIGHT EACH (lbs.)
9/16
11/16
15/16
1-1/2
1-1/2
1.0
1.0
1.75
3.5
3.5
Each tool bends only one size.
Conforms to Federal Specification GGG-B-191a Type III, Class 2.
METRIC SIZE BENDING TOOLS
PART NO.
TUBE O.D.
364-FHBM-6MM
364-FHBM-8MM
364-FHBM-10MM
364-FHBM-12MM
Each tool bends only one size.
11
(mm)
6
8
10
12
RADIUS TO CENTER OF TUBE
(mm)
(inches)
Starting at 0°
Bends to 90°
Handle swivels at 90°
Complete bend at 180°
WEIGHT EACH
(kg.)
(lbs.)
14.2 9/16 0.451.0
17.5 11/16 0.451.0
24.0 15/16 0.791.75
38.1 1-1/2 1.63.5
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
HEAVY DUTY LEVER TYPE
664-FH HEAVY-DUTY 180° TUBE BENDER WITH ROTO-LOK™
INDEXING HANDLE FOR TIGHT RADIUS BENDS
For 1/4” to 1/2” and 6 mm to 12 mm O.D. tubing.
• New design for accurate and tight bends up to 180˚ in stainless steel and other tough metals.
• Patented, quick action trigger release repositions two-stage handle midway through a
bend when both handles begin to meet. This feature allows easy fabrication of optimized
bends up to 180˚ with reduced effort, better control and no crossing of handles!
• Rollers in bending handle reduce friction and bending effort; eliminate scoring of tubing.
• Patented ergonomic grips.
• Durable nickel finish.
• Vise lug for mounting in vise.
• Clamshell packaging available for 1/4” and 3/8” O.D. models.
Quick Release Collar
Rollers reduce effort and
eliminate scoring marks
Roto-Lok™ Indexing Lever
PART NO.
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE (in.) WEIGHT EACH (lbs.)
664-FH-041/4
9/16
1.2
664-FH-063/8
15/16
3.7
664-FH-081/2
1-1/2
7.6
PART NO.
TUBE O.D. (mm) RADIUS TO CENTER OF TUBE (mm) WEIGHT EACH (lbs.)
664-FH-6MM6
15
1.2
664-FH-8MM8
24
3.7
664-FH-10MM10
24
3.7
664-FH-12MM12
38
7.6
Pivoting Tube Lock Hook
664-FH-04
Ergonomically molded
cushion grips
Optimized Tight
Bend Radius
664-FH-08
1
664-FH-06
664-FH-04
664-FH-04
3
2
BEND
TO 90°
4
PULL
TRIGGER
DOWN TO
RELEASE
HANDLE
5
RAISE
HANDLE UP
& RELEASE
TRIGGER
LOWER
HANDLE TO
COMPLETE
BEND
12
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
HEAVY DUTY LEVER TYPE
564-FH AND 564-FHT LEVER TYPE HEAVY-DUTY TUBE BENDERS
For 3/8” and 1/2” O.D. tubing.
These heavy-duty tube benders feature high-strength tool steel construction on all components subjected to stress
during the bending process – including forming rollers, form wheel, stop pins, hook and cam adjustment shaft.
Unique offset handle design assures maximum power transfer between worker and bender. Bender will not
“gyrate” as handles are brought to closed position.
• Meets ANSI B31.1/ASME Sec. 3 Boiler/Power requirements (FH Models only).
• Vise mountable.
• Prevents slippage and flattening.
• Fully adjustable to compensate for variances in tube tolerance.
• Starts with handles at 90° angle.
• Built for rugged day-in and day-out use.
• Precise bends!
• Self-aligning rollers eliminate scoring and reduce
bending effort.
564-FH-06
PART NO.
TUBE O.D. (in.)
RADIUS
TO CENTER OF TUBE (in.)
WEIGHT EACH (lbs.)
564-FHT-063/8 15/16
564-FH-063/8 1-1/8
564-FH-081/2 1-1/2
5.0
5.5
7.0
Each tool bends only one size.
Adjustable tubing
material compensator
comes with FH models
Adjustable eccentric
shaft on FH models
Bend calibrations
Adjustable
clamping hook
Built-in vise lug
for bench mounting
Adjustable bend
angle indicator (not
available on FHT)
13
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
LEVER TYPE KITS
WIDE RANGE TUBE BENDER KITS
For 1/4” to 7/8” O.D. tubing.
Each tool quickly adapts to all sizes in its range by changing forming wheel and block.
Telescopic handles reposition during bend for best leverage. Calibrations show precise
bend angle. One-piece benders furnished for 1/4” and 5/16” O.D. sizes.
Includes metal tool case with space for other tools needed on the job.
Conforms to Federal Specification GGG-B-191a Type III, Class 1.
All wide range benders
furnished in tool case
with space for other tools.
260-FHA
260-FHA for 7 sizes. Wt. 23 lbs.
PART NO. 2
PART NO. 3
PART NO. 4
7/8”
PART NO. 5
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE (in.)
1/4
5/16
3/8*
1/2*
5/8*
3/4*
7/8*
9/16
11/16
1-5/8
1-5/8
2-1/4
3
3
S8426601 Form Shoe
PART NO. 1
S74754
Thumb Screw
350-FHA for 6 sizes. Wt. 20 lbs.
S68483
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE (in.)
1/4
5/16
3/8*
1/2*
5/8*
3/4*
9/16
11/16
1-5/8
1-5/8
2-1/4
3
Wrench Assembly
S8425301 Handle Assembly
S68484Wrench
S68485Stud
S8114601Base
3/4”
PART NO. 1
5/8”
PART NO. 1
1/2”
5/8”
PART NO. 1
3/8”
PART NO. 1
3/8”
360-FHA for 4 sizes. Wt. 20 lbs.
1/2”
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE (in.)
3/8*
1/2*
5/8*
3/4*
1-5/8
1-5/8
2-1/4
3
* Recommended for bending annealed copper
and aluminum tubing only.
PART NO. 2
PART NO. 3
PART NO. 4
PART NO. 5
Size (in.)
PART NO. 2
PART NO. 3
PART NO. 4
PART NO. 5
PART NO. 2
PART NO. 3
PART NO. 4
PART NO. 5
PART NO. 2
PART NO. 3
PART NO. 4
PART NO. 5
3/4”
S8426501 Form Shoe
PART NO. 1
(Wheel Assembly)
PART NO. 2
(Hook)
PART NO. 3
(Spring Washer)
PART NO. 4
(Hook Screw)
PART NO. 5
(Form Wheel)
3/8
S68478
S68480
S68481
S66914
S68479
1/2
S68492
S62156
S68481
S66914
S68493
5/8
S68496
S8058801
S68481
S66914
S68497
3/4
7/8
S8487001
S8485201
S8058901
S68502
S68481
S68481
S66914
S66914
S8442401
S8422701
14
TUBE BENDERS
For aircraft grade stainless steel (MIL-T-6845) and all other metal tubing of bending temper.
GEAR TYPE
270-F GEAR TYPE TUBE BENDER
For 3/8” to 1-1/8” O.D. tubing.
For all bending work. Spur-gear type with 10-to-1 ratio for easy bending of tempered
tubing. Floating shoe aligns tube perfectly on calibrated forming wheel. Pull-pin on
wheel speeds repositioning for bends over 90°. Portable. Can be hand held, clamped in
vise or bolted to bench. Adapts to pipe vise with handle 271-F.
270-F
Each tool bends only one size.
PART NO.
TUBE O.D. (in.)
RADIUS FROM
MIN. RETURN
CTR. TO CENTER OF TUBE (in.) FROM CENTER TO CENTER OF TUBE (in.)
271-F
Pipe vise extension (fits all
270-F Benders). For use
when clamping bender in
pipe vise.
270-F-06
3/8
1-3/4
4-1/2
270-F-08
1/2
2-1/2
6
270-F-10
5/8
3
7-1/2
270-F-12
3/4
4
9-1/2
270-F-14
7/8
4
9-1/2
270-F-16
1
4
9-1/2
270-F-18
1-1/8
4
9-1/2
271-F
WEIGHT
WALL THICKNESS
3
4.75
8.5
15
14.75
14.75
14.25
1.75
.030 to .060
.035 to .065
.040 to .072
.042 to .083
.045 to .083
.065 to .095*
.065 to .095*
EACH (lbs.)
(in.)
* Not recommended for Type L Hard and Type M copper tubing with wall thickness over .065”.
REPLACEMENT PARTS
For 270-F Gear Type Tube Benders
SPRING RING - 11
HOOK - 4
SHOE PIVOT PIN - 12
SHOE - 5
WASHER - 3
FULCRUM PIN - 13
SHOULDER BOLT - 2
CHAIN - 15
BODY - 6
DRIVE SCREW - 14
HANDLE - 7
WHEEL - 1
SPRING RING - 8
TUBE
BENDER
270-F-06
Size (in.)
3/8
270-F-081/2
270-F-105/8
270-F-123/4
270-F-147/8
270-F-161
270-F-181-1/8
15
PART NO. 1 PART NO. 2 PART NO. 3 PART NO. 4 PART NO. 5 PART NO. 6 PART NO. 7
PART NO. 8
PINION SHAFT - 9
COTTER PIN - 10
PART NO. 9 PART NO. 10 PART NO. 11 PART NO. 12 PART NO. 13 PART NO. 14 PART NO. 15
S62244
S62245
S62246
S62247
S62250
S62251
S62252
S62253
S62254
S62255
S62257
S62258
S62838
S62836
S62839
S62261
S62275
S62305
S62302
S62299
S62287
S62264
S62280
S62294
S62294
S62294
S62294
S62246
S62279
S62298
S62298
S62298
S62298
S62263
S62278
S62307
S62304
S62301
S62290
S62262
S62277
S62306
S62303
S62300
S62289
S62260
S62276
S62288
S62288
S62288
S62288
S62269
S62284
S62292
S62292
S62292
S62292
S62253
S62285
S62297
S62297
S62297
S62297
S62268
S62283
S62291
S62291
S62291
S62291
S62255
S62255
S62255
S62255
S62255
S62255
S62266
S62281
S62296
S62296
S62296
S62296
S62265
S62282
S62295
S62295
S62295
S62295
S62840
S62841
S62835
S62835
S62835
S62835
S62836
S62836
S62836
S62836
S62836
S62869
S62839
S62842
S62837
S62837
S62837
S62837
TUBE BENDERS
For aircraft grade stainless steel (MIL-T-6845) and all other metal tubing of bending temper.
GEAR TYPE
WORM GEAR TUBE BENDER
For 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4” O.D. tubing.
600-F
Precision tool for highest quality work. 50-to-1 gear
ratio and crank with revolving hand grip keeps effort at a
minimum. Follow bar eliminates drawing action and
keeps tube in virtually perfect round. Adjustable pressure
roller positions quickly in index holes. Enclosed gears.
Includes metal tool case. Can be clamped in vise or bolted
to bench or tripod. Size of kit: 14” x 9” x 6”. Wt. 35.0 lbs.
600-F
Tube Wall Thickness and Bend Radius
TUBE O.D. (in.)
1/4
5/16
3/8
1/2
5/8
3/4
WALL THICKNESS (in.)
RADIUS TO CENTER OF TUBE (in.)
.016 to .049
.020 to .065
.028 to .083
.035 to .083
.042 to .083
.049 to .083
3/4
1
1-1/4
2
2-1/2
3
Conforms to Federal Specification GGG-B-191b, Type I, Class 2.
Meets ANSI Specification (B31.1) and ASME Section III Nuclear Code.
PRECISION GEAR TUBE BENDER
For 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4” O.D. tubing.
700-F
Makes bends up to 180° in stainless steel tubing conforming
to Specification MIL-T-6845. Precision construction maintains
original diameter of tube within 5% at cross section of bend.
Also bends copper, aluminum and other types of
tubing. Includes metal tool case.
Size of kit 16” x 7” x 6-1/2”. Wt. 32.0 lbs.
700-F
Tube Wall Thickness and Bend Radius
TUBE O.D. (in.)
1/4
5/16
3/8
1/2
5/8
3/4
* WALL THICKNESS (in.)
RADIUS TO CENTER OF TUBE (in.)
.016 to .049
.020 to .065
.028 to .083
.035 to .083
.042 to .083
.049 to .083
9/16
11/16
15/16
1-1/4
1-1/2
1-3/4
C
Calibration
dial indicates
angle of bend.
* In some cases these wall thicknesses can be exceeded for copper and aluminum
tubing. Consult factory.
Conforms to Federal Specification GGG-B-191a,
and Interim Amendment No. 2, Type I, Class 1.
16
FLARING & SWAGING
For soft tubing only - copper, aluminum and brass.
45° FLARING TOOLS
45° FLARING TOOLS
For 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” O.D. tubing.
195-FC
Flares 7 sizes of tubing. Rugged forged steel slip-on yoke and
hardened flaring bar. Positive clamping action of bars
prevents tube slippage. Self-centering yoke with swivel-type,
hardened steel, chrome finished flaring cone forms better flares
with less effort. Design of yoke permits flaring where there is
little space between nut and tube end. Satin finish nickel chrome
plated. Wt. 2.0 lbs.
296-FC
Flares 7 sizes of tubing. Economical, fast-operating tool. Quick
slip-on yoke. Easy operating swivel-type, hardened steel,
chrome finished cone assures smooth flares. Chrome and black
finish. Wt. 1.75 lbs.
195-FC, 296-FC
195-FC
296-FC
45° METRIC SIZE FLARING TOOL
395-FAM Same as 195-FC except for metric sizes
4 mm, 6 mm, 8 mm, 10 mm, 12 mm,
15 mm and 16 mm O.D. tubing.
Outside Tube Diameter(in.)
3/161/45/163/87/161/25/8
Wall Thickness
(in.)
.028 .035.035 .035 .035.035.035
395-FAM
Outside Tube Diameter
Wall Thickness
(mm)
4
6
8
10
12
15
16
(mm)
1.01.01.01.01.01.01.0
45° LARGE SIZE FLARING TOOLS
Flares larger tube sizes. Quick slip-on yoke with hardened steel, chrome finished swivel
flaring cone reduces effort. Positive clamping action of flaring bar eliminates tube
movement. Nickel chrome finish.
103-FS
Conforms to Federal Specification GGG-F-451a Type 1, Class 2. Style A.
103-FS
203-FA
375-FS
376-FS
For sizes 3/4”, 7/8” and 1” O.D. tubing. Wt. 3.75 lbs.
For sizes 5/8”, 3/4”, 7/8” and 1-1/8” O.D. tubing. Wt. 3.75 lbs.
For sizes 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”
and 3/4” O.D. tubing. Includes tool case. Wt. 3.75 lbs.
For sizes 1/2”, 5/8”, and 3/4” O.D. tubing. Wt. 2.0 lbs.
SELF GAUGING- Just insert
tube flush with top of die
for accurate flare size.
FORMS STRONGER FLARESStronger flares assured by smooth,
even radius formed at base of
every flare by engineered chamfer.
Outside Tube Diameter (in.)
1/83/161/45/163/87/161/2 5/8 3/4 7/8 1 1-1/8
Wall Thickness
(in.)
.025.028.035.035.035.035.035.049.049.049.058.058
HI-DUTY® 45° FLARING TOOL
For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
300-FB
Hardened steel, chrome finished cone makes exceptionally smooth, high strength flares
with a radius at base of flare – instead of the sharp angle formed by ordinary
tools. Slip-on yoke permits use in tight quarters, allows flaring where there
is little space between nut and tube end. New feed screw design provides
smoother, easier operation. Positive gripping and self-gauging of tube for exact
flare size. Sliding die blocks lock in place by lever clamp action to ensure even
dispersal of force around full diameter of tube for superior grip. Wt. 1.6 lbs.
Outside Tube Diameter (in.)
3/161/45/163/8 1/25/8
Wall Thickness
(in.)
.028.035.035.035.035.035
17
SELF GAUGING- Just insert
tube flush with top of die
for accurate flare size.
FORMS STRONGER FLARESStronger flares assured by smooth,
even radius formed at base of
every flare by engineered chamfer.
FLARING & SWAGING
For soft tubing only - copper, aluminum and brass.
45° ROL-AIR™ FLARING TOOLS
45° ROL-AIR™ FLARING TOOL
Flares and burnishes 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
500-FC
Faceted, hardened steel, chrome finished cone rolls out perfect 45° flares above die block,
and automatically burnishes flare face reducing the need for deburring. Original wall
thickness is maintained at base of flare. Slip-on yoke permits use in tight quarters,
where there is little space between nut and tube end. Larger handle, with better leverage,
and precision threads on feed screw make flaring effortless. Heat treated dies grip tubing
without scoring. Satin chrome and black finish. Wt. 1.5 lbs.
Outside Tube Diameter (in.)
3/161/4 5/163/8 1/2 5/8
Wall Thickness
(in.)
.028.035 .035.035 .035.035
500-FC
METRIC SIZE 45° ROL-AIR™ FLARING TOOL
500-FCM Same as 500-FC except for metric size tubing 6 mm, 8 mm, 10 mm, 12 mm,
15 mm and 16 mm O.D.
Outside Tube Diameter
(mm)
6 8 10121516
Wall Thickness
(mm)
1.01.01.01.01.01.0
Flares rolled out above die bar
by super-smooth faceted cone.
Makes stronger flares.
Unique detention
mechanism for rapid
engagement and release
of die blocks.
“GRABBER”™ ROL-AIR™ 45° FLARING TOOL
Universal application. Adjustable opening holds all sizes.
Flares and burnishes 3/16” to 5/8” (4.75 mm to 16 mm) O.D. tubing.
525-F
Unique, self-adjusting, tube holding mechanism permits flaring any size tubing
within the range of 3/16” to 5/8” (4.75 mm to 16 mm) O.D. Innovative,
single-opening design is more compact and easier to use than conventional
multi-opening flaring bars. Faceted, hardened steel, chrome finished cone
rolls out and burnishes perfect 45° flare above the tube-holding mechanism
reducing need for deburring. Original wall thickness is maintained at base of
flare. Slip-on self-centering yoke permits use in tight quarters. Large handle,
with better leverage, and precision threads on feed screw make flaring effortless.
High quality construction with satin chrome and black finish. Wt. 1.75 lbs.
525-F
Flares rolled out above die bar
by super-smooth faceted cone.
Makes stronger, highly polished
flares.
Outside Tube Diameter (in.)
3/161/4 5/163/8 1/2 5/8
Wall Thickness
(in.)
.028.035 .035.035 .035.035
Outside Tube Diameter
Wall Thickness
(mm)
4.75
6
8
10
12
15
16
(mm)
1.01.0 1.01.0 1.01.0 1.0
(1)Insert tubing into adjustable opening of tube-holding assembly. Position end of
tubing approximately 1/8” above the surface of holder.
1/8”
(2)Tighten clamp screw approximately 1/2 to 3/4 of a turn beyond free travel position
to secure tubing.
(3)Be certain flaring cone surface is oiled. Slip yoke over tube-holding assembly centering
on tubing. Twist yoke clockwise to lock in position. Turn yoke handle clockwise to flare.
18
FLARING & SWAGING
For soft tubing only - copper, aluminum, brass and steel.
45° DOUBLE FLARING TOOLS
45° DOUBLE FLARING TOOL
For 3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing.
93-FB
Recommended for Bundy and other annealed soft steel tubing (wall
thickness to .035”). Also makes single or double flares in soft copper or
aluminum tubing. Small, lightweight, easy to handle. Steel yoke;
swivel-type hardened steel, chrome finished flaring cone. Bar provides
positive grip of tubing. Includes tool case. Wt. 3.0 lbs.
Conforms to Federal Specification GGG-F-451a, Type 1, Class 2, Style A.
SWIVEL-TYPE BALL
BEARING CONE Ball thrust bearing
in flaring cone
minimizes friction,
makes operation easier.
93-FB
DOUBLE FLARING ADAPTERSScrew down flaring cone
with proper size adapter in
tube. Retract cone, remove
adapter, complete flare.
93-FB
45° DOUBLE FLARING TOOL
For 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4” O.D. tubing.
195-FB
Designed for automotive air-conditioning service. Makes double flares
in soft copper or aluminum tubing (wall thickness to .035”). Easy operating,
ball bearing swivel-type hardened steel flaring cone with chrome finish.
Quick slip-on yoke. Flaring bar offers positive grip of tubing. Also makes
single flares. Includes metal tool case. Wt. 5.5 lbs.
DOUBLE FLARING ADAPTERSScrew down flaring cone
with proper size adapter in
tube. Retract cone, remove
adapter, complete flare.
19
195-FB
SWIVEL-TYPE BALL
BEARING CONE Ball thrust bearing
in flaring cone
minimizes friction,
makes operation easier.
FLARING & SWAGING
For soft tubing only - copper, aluminum and brass.
37° FLARING TOOLS
37° FLARING TOOL
For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
437-FB
For use with soft copper, aluminum and brass tubing. Hardened steel, chrome finished
cone makes exceptionally smooth, high-strength flares with a radius at base of
flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits
use in tight quarters, allows flaring where there is little space between nut and tube
end. New feed screw design provides smooth, easier operation. Positive gripping and
self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp
action. Satin chrome and black finish. Wt. 1.75 lbs.
Outside Tube Diameter(in.)
3/161/4 5/163/8 1/2 5/8
Wall Thickness
(in.)
.032.032 .032.032 .035.035
437-FB
FORMS STRONGER FLARESStronger flares assured by smooth,
even radius formed at base of
every flare by engineered chamfer.
SELF GAUGING- Just insert
tube flush with top of die
for accurate flare size.
37° ROL-AIR™ FLARING TOOL
For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
507-FB
For use with soft copper, aluminum and brass tubing. Faceted, hardened steel chrome
finished cone rolls out perfect 37° flares above die block - then automatically burnishes
flare face. Original wall thickness is maintained at base of flare. Slip-on yoke permits
use in tight quarters where there is little space between nut and tube end. Larger
handle, with better leverage, and precision threads on feed screw make flaring
effortless. Heat treated dies firmly grip tubing. Satin chrome and black finish. Wt. 1.75 lbs.
507-FB
Outside Tube Diameter(in.)
3/161/4 5/163/8 1/2 5/8
Wall Thickness
(in.)
.032.032 .032.032 .035.035
METRIC SIZE 37° ROL-AIR™ FLARING TOOL
507-FBM Same as 507-FB except for metric sizes
6 mm, 8 mm, 10 mm, 12 mm, 15 mm and 16 mm O.D. tubing.
Outside Tube Diameter
(mm)
6 8 10121516
Wall Thickness (mm)
1.01.01.01.01.01.0
Flares rolled out above die bar
by super-smooth faceted cone.
Makes stronger, highly polished
flares.
20
FLARING & SWAGING
For steel, stainless steel, copper and aluminum tubing.
37° FLARING TOOLS
37° ROL-AIR™ FLARING TOOLS
For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
400-F
401-FA
402-FA
Forms 37° flares to government specifications in steel, stainless steel (including
MIL-T-6845), titanium and other metal tubing. Positive stop gauge assures
correct size of flare. Special burnishing action polishes flare face. Three rollers
in flaring cone roll out 37° flare above die block. Roller action cuts effort
required; maintains original wall thickness - eliminates stress concentration.
Extension on yoke for clamping in vise. Satin chrome and black finish.
Includes tool case. Wt. 2.5 lbs.
Reaming yoke for 1/4” to 5/8” O.D. tubing. Recommended for use with steel
and stainless steel tubing for proper flaring. Wt. 0.7 lbs.
Flaring and reaming kit. Contains No. 400-F Flaring Tool and No. 401-FA
Reaming Yoke for 1/4” to 5/8” O.D. tubing. Includes tool case. Wt. 3.2 Ibs.
400-F
Conforms to Federal Specification GGG-F-451a. Type 1, Class 1, Style A.
Outside Tube Diameter(in.)
3/161/4 5/163/8 1/2 5/8
Wall Thickness
(in.)
.035.049 .049.065 .065.065
Feed release and
burnishing mechanism.
Flare control gauge.
3 rollers in flaring
cone. Flare formed
above die block.
402-FA
401-FA
Feed screw controls
depth of reaming.
SWIVEL-TYPE BALL
BEARING CONE Ball thrust bearing
in flaring cone
minimizes friction,
makes operation easier.
37° HEAVY-DUTY FLARING TOOL
For 1/8”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing.
447-F
Forms 37° flares in annealed stainless steel (MIL-T-6345 or AMS5566),
cold drawn stainless steel and annealed copper or aluminum tubing. Built to
withstand continuous rugged service. Ball thrust bearing mechanism reduces
effort required. Hardened tool steel die features non-slip grip of tubing, even
after repetitive flaring. Bar has vise extension. Wt. 3.25 lbs.
Outside Tube Diameter(in.)
1/83/161/45/163/81/2
Wall Thickness
(in.)
.032.032.035.049.049.049
21
447-F
FLARING & SWAGING
For steel, stainless steel, copper and aluminum tubing.
37° FLARING TOOLS
LARGE SIZE 37° ROL-AIR™ FLARING TOOLS
For 3/4”, 7/8”, 1”, 1-1/4”, 1-1/2” and 2” O.D. tubing.
Three cylinders in flaring cone roll out 37° flare above die block. Flares soft steel, copper, aluminum
and fully annealed stainless steel tubing. Roller action reduces effort required; maintains original wall
thickness; eliminates stress concentration. Feed release and burnishing action. Vise clamp
extension on yoke. Heat treated dies clamp tubing without marking it. Satin chrome and black
finish. Includes metal tool case.
537-F
637-F
Flares and burnishes 3/4”, 7/8”, 1” and 1-1/4” O.D. tubing.
Wt. 13.0 lbs.
Flares and burnishes 1-1/4”, 1-1/2” and 2” O.D. tubing.
Wt. 13.0 lbs.
* Conforms to Federal Specification GGG-F-451a,Type 1, Class 1, Style B.
537-F
Vise clamp extension.
Outside Tube Diameter
Wall Thickness
Flares rolled out above die bar.
Feed release and
burnishing mechanism.
(in.)
3/4
7/8
1
1-1/4
1-1/2
2
(in.)
.065.065 .065.083 .083.083
37° PRECISION FLARING TOOL
For 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1”,
1-1/4” and 1-1/2’’ O.D. tubing.
407-FA
Precision tool flares (37°) 1/8 hard stainless steel and other tubing to
extremely close tolerances. Swivel-head clamp locks tubing in smooth-bore
die blocks. Lathe-type tube feed. Flares rolled out by ball-bearing mounted
concentric flaring cone. Tool must be clamped in vise. Includes metal tool case.
Wt. 50.0 lbs.
Facing and deburring attachments not included with 407-FA.
407-F
Includes the 407-FA, plus these facing and deburring attachments:
S74460 Internal deburring tool for 1/8” to 1/2” O.D. tubing.
S74455 Internal deburring tool for 5/8” to 1-1/2” O.D. tubing.
S74447 External deburring tool.
S74462 Facing tool.
407-FA
TUBE O.D. (in.)
* WALL THICKNESS (in.)
1/8 .020,
3/16 .010,
1/4 .016,
5/16.035
3/8 .028,
1/2 .035,
5/8 .035,
.028
.028
.028, .035
3/4 .028,
1 .028,
1-1/4 .035,
1-1/2 .035,
.035, .049
.035
.049
.049, .065
.035
.049
.049
* In some cases these wall thicknesses can be
exceeded when flaring aluminum, copper or
soft steel tubing. Consult factory.
22
FLARING & SWAGING
Production and metric automotive flaring tools.
FLARING & SWAGING TOOLS
45° & 37° PRODUCTION FLARING AND SWAGING TOOL
For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
555-FS
Flares and swages 6 sizes of soft copper, aluminum or brass tubing. Makes both 45°
and 37° single flares. Fast cam lever operation. Portable. Can be clamped in vise or
bolted to bench. Change sizes quickly. Built in gauge for accurate flare size or swage
depth. Unique jaws provide a positive non-slip grip on tubing. Wt. 6.5 lbs.
Replacement parts: 560-S-03 3/16” Swaging adapter.
560-S-04 1/4” Swaging adapter.
560-S-05 5/16” Swaging adapter.
560-S-06 3/8” Swaging adapter.
560-S-08 1/2” Swaging adapter.
560-S-10 5/8” Swaging adapter.
S70348 45° Flaring cone.
S70349 37° Flaring cone.
S8711201 Set of replacement dies.
Outside Tube Diameter Wall Thickness 555-FS
(in.)
3/16
1/4
5/16
3/8
1/2
5/8
(in.)
.028.035.035.035.035.035
Swages 6 sizes.
Makes 45° & 37° flares.
METRIC BUBBLE FLARING TOOL
For soft steel or Bundy tubing 4.75 mm (3/16”), 6 mm, 8 mm
and 10 mm O.D.
293-F
Forms international standard bubble flare in one fast operation. Flares metric
hydraulic brake lines used on European, Japanese and American automobiles
and light trucks. This unique design makes flares on 4 sizes of tubing:
4.75 mm (3/16”), 6 mm, 8 mm and 10 mm O.D. Will flare soft double-wall
steel tubing with a wall thickness up to .028”. Can also be used with soft
copper and aluminum tubing. Includes tool case.
Replacement parts: S8771801 4.75 mm (3/16”) adapter.
S8771701 6 mm adapter.
S8771601 8 mm adapter.
S8771301 10 mm adapter.
S8694401 Wing nut.
23
METRIC BUBBLE FLARING Just insert tube flush with top
of die for accurate flare. With
proper adapter size attached,
screw down flaring cone
until adapter strikes flaring
bar surface. Bubble flare is
complete.
293-F
FLARING & SWAGING
For soft tubing only - copper, aluminum and brass.
FLARING & SWAGING TOOLS
FLARING (45°) & SWAGING TOOL
For 1/8” to 3/4” (4 mm to 22 mm) O.D. tubing.
275-FS
Flares and swages. Converts quickly. Screw-type feed. Ideal for use in close
quarters. Two bars included cover 9 sizes. Swivel-type swaging adapters and
flaring cone are hardened steel, chrome finished for easy operation.
Self-centering, slip-on forged steel yoke. Includes tool case. Wt. 3.5 Ibs.
Flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” and 3/4” O.D.
Includes 5 swage adapters for 7 tube sizes: 3/16”, 1/4”, 5/16”, 3/8”,
1/2”, 5/8”, 3/4” O.D.
Replacement parts: 278-FS-03X04X06 Adapter
278-FS-10 Adapter 5/8”.
3/16”, 1/4”, 3/8”.
278-FS-12 Adapter 3/4”.
278-FS-05 Adapter 5/16”.
S38600 Flaring Cone.
278-FS-08 Adapter 1/2”.
275-FS
275-FSM Metric flaring and swaging tool. Same as 275-FS except for metric sizes
4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm, 16 mm,
18 mm and 22 mm O.D. tubing. Includes tool case. Wt. 3.5 lbs.
Replacement parts: 278-FSM-4-6-10 Adapter
278-FSM-15 Adapter 15 mm.
4 mm, 6 mm, 10 mm.
278-FSM-16 Adapter 16 mm.
278-FSM-8 Adapter 8 mm.
278-FSM-18 Adapter 18 mm.
278-FSM-12 Adapter 12 mm.
278-FSM-22 Adapter 22 mm.
278-FSM-14 Adapter 14 mm.
S38600 Flaring Cone.
275-FS
Outside Tube Diameter (in.)
1/8 3/161/45/163/87/161/25/83/4
Wall Thickness
(in.)
.020 .028.035.035 .035 .035 .035.035.035
Outside Tube Diameter
(mm)
4 6 8101214151618 22
Wall Thickness
(mm)
1.0 1.01.01.0 1.0 1.0 1.01.01.0 1.0
45° FLARING, SWAGING AND CUTTING KIT
For soft copper, aluminum, steel, stainless steel and brass tubing.
275-FSC Kit contains a TC-1000 tube cutter for 1/8” to 1-1/8” O.D. tubing and
275-FS 45° flaring and swaging tool. Includes tool case. Wt. 3.0 lbs.
Flares:
1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”
and 3/4” O.D. tubing.
Swages:
3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4”
O.D. tubing.
45° DOUBLE FLARING, SWAGING AND CUTTING KIT
275-FSCD Kit contains 275-FS, TC-1000, and double flaring adapters for
3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing. Includes tool case.
275-FSC
24
FLARING & SWAGING
For soft tubing only - copper, thin wall steel and stainless steel.
FLARING & SWAGING TOOLS
175-EX XPANDR™ SWAGING/EXPANDING KIT
• Easily expands tube for braze or soldered joints in seconds.
• Floating jaw head design is self-centering for fast, accurate alignment.
• Re-rounds deformed tube ends.
• Accurate joints in seconds without using fittings.
• For soft copper and soft thin wall steel and stainless steel tubing.
• Save 60-70% of time over conventional swaging tools.
• Reduces soldering by 50% over standard fittings.
• Meets ARI tube insertion recommendations.
• Long life with high alloy hardened steel jaw segments.
• XpandR™ Tool comes with non-slip, ergonomically designed grips.
• Includes 5 heads: 3/8”, 1/2”, 5/8”, 3/4” and 7/8”.
• Includes metal tool case.
175-EX
1.
2.
3.
4.
5.
6.
SIX EASY STEPS:
1. Deburr inside of tube.
2. To create perfectly centered capillary sockets for soldering or brazing, you
must use soft copper or fully anneal end of tube to be expanded.
3. Pull XpandR™ handle up to 90-degree position. Maintain this position as
you screw the appropriate size head over the center-punch and tighten.
4.Insert the end of the tube over the XpandR™ head completely.
5. Pull the lever completely down.
6. Return the lever to the 90-degree position. Remove expanded tube.
175-EX KIT INCLUDES
175EXP
XpandR™ Pliers
175EXC
XpandR™ Case
175EX06
3/8” head
175EX08
1/2” head
175EX10
5/8” head
175EX12
3/4” head
175EX14
7/8” head
You may order kit items separately. Kit wt. 20 lbs.
ADDITIONAL HEAD SIZES AVAILABLE:
25
175EX16
175EX18
175EX22
175EX26
1” head
1-1/8” head
1-3/8” head
1-5/8” head
TO RE-ROUND SLIGHTLY DEFORMED TUBE ENDS:
1. Insert deformed tube end to the first groove of head.
2. Pull the lever completely down.
3. Return the lever to the 90-degree position. Remove expanded tube.
SWAGING
For soft tubing only - copper, aluminum and brass.
SWAGING TOOLS
PUNCH TYPE SWAGING TOOLS
Use these tools for making tubing connections without fittings. Enlarge end of tube,
insert another tube of original O.D. size and solder together like a sweat fitting.
94-SSP
3-in-1 swaging tool for 1/2”, 5/8” and 7/8” tubing. Wt. 1.0 lbs.
95-S
6-in-1 swaging tool for 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
Hi-alloy steel, heat-treated for rugged use.
Hex design for ease of extraction.
Precision machined surface for ease of forming.
193-S
Vinyl case contains 4 swaging punches for 1/4”, 3/8”, 1/2”
and 5/8” O.D. tubing. Wt. 1.0 lbs.
195-SA
Vise-mountable flaring bar and 4 swaging punches for 1/4”,
3/8”, 1/2” and 5/8” O.D. tubing. Includes metal tool case. Wt. 2.0 Ibs.
S75531 Flaring bar only. Wt. 1.0 Ib.
94-SSP
193-S
195-SA
Enlarge end of tube,
insert another tube,
solder like a sweat
fitting.
Tube height gauged by placing
tubing even with bevel on
swaging punch.
INDIVIDUAL SWAGING TOOLS
95-S
95-S
6 IN 1 SWAGING TOOL
Outside Tube Diameter
Wall Thickness
(in.)
3/16
1/4
5/16
3/8
1/2
5/8
(in.)
.028.035 .035.035.035.035
PART NO.
TUBE O.D. (in.) WALL THICKNESS (in.) WEIGHT (lbs.)
93-S-033/16
93-S-041/4
93-S-055/16
93-S-063/8
93-S-081/2
93-S-105/8
93-S-123/4
93-S-147/8
.028
.035
.035
.035
.035
.035
.035
.045
.20
.20
.25
.25
.50
.50
.75
1.0
45° SWAGING TOOL
For 1/2”, 5/8” and 7/8” O.D. tubing.
194-S
Screw-type flaring and swaging tool. Far easier to work with in close
quarters than punch type tools. Perfect swaging alignment of tube every
time. Hardened steel chrome finished adapters change quickly. Includes
tool case. Wt. 2.0 Ibs.
Replacement parts: 278-FS-08 Adapter 1/2”.
278-FS-10 Adapter 5/8”.
278-FS-14 Adapter 7/8”.
194-S
26
TUBING TOOL KITS
For flaring, cutting and bending soft copper, aluminum and brass tubing.
TUBE WORKING KITS
CUTTING AND FLARING KITS
Each kit contains a TC-1000 tube cutter for 1/8” to 1-1/8” O.D. tubing and a 45° or 37° flaring tool.
Includes tool case.
PART NO.
TUBE CUTTER
FLARING TOOL
RANGE OF FLARING TOOL (in.) WEIGHT (lbs.)
120-F
TC-1000
375-FS (45°)
1/8, 3/16, 1/4, 5/16, 3/8,
7/16, 1/2, 5/8, 3/4 O.D.
122-FA
TC-1000
437-FB (37°)
3/16, 1/4, 5/16, 3/8,
1/2, 5/8 O.D.
123-FA
TC-1000
300-FB (45°)
3/16, 1/4, 5/16, 3/8,
1/2, 5/8 O.D.
124-FA
TC-1000 500-FC (45° Rol-Air™) 3/16, 1/4, 5/16, 3/8,
1/2, 5/8 O.D.
1226-FA
TC-1000
195-FC (45°)
3/16, 1/4, 5/16, 3/8,
7/16, 1/2, 5/8 O.D.
2.75
124-FA
2.75
2.75
2.75
3.0
1226-FA
120-F
27
TUBING TOOL KITS
For flaring and cutting soft copper, aluminum, steel, stainless steel and brass tubing.
TUBE WORKING KITS
45° FLARING, SWAGING AND CUTTING KIT
For soft copper, aluminum, steel, stainless steel and brass tubing.
275-FSC Kit contains a TC-1000 tube cutter for 1/8” to 1-1/8” O.D. tubing and
275-FS 45° flaring and swaging tool. Includes tool case. Wt. 3.0 lbs.
Flares:
1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”
and 3/4” O.D. tubing.
Swages:
3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4”
O.D. tubing.
45° DOUBLE FLARING, SWAGING AND CUTTING KIT
275-FSCD Kit contains 275-FS, TC-1000, and double flaring adapters for
3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing. Includes tool case.
275-FSC
FLAREPRO™ FOUR-IN-ONE FLARING & SWAGING KIT
For copper, aluminum, steel, stainless steel and other metal tubing.
2000-FS Individual size jaw sets are used for positive clamping compactness
and operating convenience.
Socket head screws are provided for clamping the jaws to the yoke and feeding
the tube forming components. The screws are hand turned for all free travel
movement when advancing or retracting.
A hex socket and 3/8” square drive ratchet are furnished for easy operation
of the threaded members under load. Tube forming components (flaring cones,
double flaring adapters and swaging adapters) are retained on the feed screw
by a ball detent mechanism and can be snapped on and off for quick change
as required.
The tool is designed to permit hand-held or vise-mounted operation.
Includes tool case. Wt. 7.0 lbs.
Flaring - 37° and 45°: Flares soft copper, brass, aluminum, steel and stainless
steel in nine tube sizes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” and
3/4” O.D. tubing.
Double Flaring - 45° Only: Double flares soft copper, aluminum and steel
(Bundy or G.M. to .035 wall) in seven tube sizes: 3/16”, 1/4”, 5/16”, 3/8”, 1/2”,
5/8” and 3/4” O.D. tubing.
Swaging: Swages soft copper, aluminum and brass in seven tube sizes: 3/16”,
1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4” O.D. tubing.
2000-FS
Flaring
Outside Tube Diameter
(in.)
1/8 3/161/4 5/163/87/16 1/2 5/8 3/4
Wall Thickness
(in.)
.020 .028.035 .035.035.035 .035 .049.049
Swaging
Outside Tube Diameter
(in.)
3/161/45/163/81/25/8 3/4
Wall Thickness
(in.)
.028 .035.035 .035.035.035 .035
28
TUBING TOOL SELECTOR
TUBING TOOL SELECTOR
TUBING TOOL SELECTORTUBE MATERIAL
COPPER
TYPE K
TYPE L
SIZE RANGE
ANNEALED BENDING BENDING
TOOL
PART NO.
PAGE NO.
TUBE O.D. (in.) GENERAL
SOFT
TEMPER-HARD
HARD
SOFT
TEMPER-HARD
PURPOSE
Tube Cutters
TC-1000
4
1/8 - 1-1/8
Metal Tubing
TC-1050
5
1/8 - 5/8
TC-1550
3
1/8 - 1-1/8
TC-2050
5
3/16 - 7/8
TC-3050
5
1/8 - 1-1/8
174-F
6
3/8 - 1-1/8
206-FB
6
3/8 - 2-5/8
227-FA
4
1/8 - 3/4
312-FC
4
1/4 - 1-5/8
406-FA
6
2 - 4-1/8
Tube Cutters
206-FBP
6
3/8 - 2-5/8
Thermoplastic
307-FP
7
1/16 - 1/2 (4)
Rubber Hose
327-FP
7
1/8 - 13/16 (4)
Saw Vise
384-FA
6
1/8 - 1-1/2
Bending Tools
101-F
10
1/4 - 5/8
102-F
10
1/4 - 7/8
112-F
10
1/4 - 3/8
163-F
10
1/4 - 5/8
201-F
10
1/4 - 7/8
260-FHA
14
1/4 - 7/8
270-F
15
3/8 - 1-1/8
350-FHA
14
1/4 - 3/4
360-FHA
14
3/8 - 3/4
364-FH
11
1/8 - 3/16
364-FHA
11
1/4 - 1 (3)
364-FHAM
11
6 - 12 mm
364-FHB
11
1/4 - 1/2
364-FHBM
11
6 - 12 mm
367-FH
10
1/8, 3/16, 1/4
368-FH
10
3/16, 1/4, 5/16, 3/8
370-FH
10
3/16, 1/4, 3/8, 1/2
470-FH
9
3/16, 1/4, 5/16, 3/8
564-FH
13
3/8, 1/2
600-F
16
1/4 - 3/4
664-FH
12
1/4, 3/8, 1/2
664-FH(Metric)
12
6 - 12 mm
700-F
16
1/4 - 3/4
37˚ Flaring Tool
400-F
21
3/16 - 5/8
407-FA
22
1/8 - 1-1/2
437-FB
20
3/16 - 5/8
447-F
21
1/8 - 1/2
507-FB
20
3/16 - 5/8
507-FBM
20
6 - 16 mm
555-FS
23
3/16 - 5/8
537-F
22
3/4 - 1-1/4
637-F
22
1-1/4 - 2
2000-FS
28
1/8 - 3/4
45˚ Flaring Tool
103-FS
17
3/4 - 1
195-FC
17
3/16 - 5/8
203-FA
17
5/8 - 1-1/8
275-FS
24
1/8 - 3/4
275-FSM
24
4 - 22 mm
296-FC
17
3/16 - 5/8
300-FB
17
3/16 - 5/8
375-FS
17
1/8 - 3/4
376-FS
17
1/2 - 3/4
395-FAM
17
4 - 16 mm
500-FC
18
3/16 - 5/8
500-FCM
18
6 - 16 mm
525-F
18
3/16 - 5/8
4. 75 - 16 mm
555-FS
23
3/16 - 5/8
2000-FS
28
1/8 - 3/4
45˚ Double
93-FB
19
3/16 - 1/2
Flaring Tools
195-FB
19
1/4 - 3/4
2000-FS
28
3/16 - 3/4
Reaming and
208-F
32
3/16 - 1-1/2
Deburring Tools
208-FSS
32
3/16 - 1-1/2
210-F
32
Tube Constrictor
TC-1020
4
1/8 - 1-1/8
Swaging Tools
93-S
26
3/16 - 7/8
94-SSP
26
1/2, 5/8, 7/8
95-S
26
3/16 - 5/8
193-S
26
1/4 - 5/8
194-S
26
1/2 - 7/8
195-SA
26
1/4 - 5/8
275-FS
24
3/16 - 3/4 555-FS
23
3/16 - 5/8
2000-FS
28
3/16 - 3/4
Metric Bubble
293-F
23
4.75 - 10 mm
Flaring Tool
29
••
•• ••
••
••
••
•• ••
••
••
••
•• ••
••
••
••
•• ••
••
••
••
•• ••
••
••
• • • • •
••
•• ••
•
••
••
•• ••
••
••
•• ••
••
••
•• ••
••
•
•
••
•••
••
••
••
••
••
••
••
•• ••
••
••
••
••
••
••
•
••
••
••
••
•
•
•
•
••
•• ••••
••
•• ••
••
••
•• ••
••
••
•• ••••
••
•• ••
••
••
•• ••
••
••
•• ••
••
••
•• ••••
••
•• ••
••
••
•• ••
••
••
•• ••
••
••
•• ••••
••
•• ••
••
••
••
••
••
•
•
•
••
•• ••
••
••
••
•• •
••
••
••
••
••
••
••
•• ••
••
••
••
•
•
(5)
(5)
(5)
(1) Heavy duty cutting wheel No. S75046 is recommended for continuous service with steel, stainless steel, monel, titanium and hard temper copper tubing.
(2) Type M tubing should be torch annealed before flaring.
(3) No.364-FHA, 5/8” - 1” size should be used only with annealed (softened) non-ferrous tubing.
(4) Not to be used with metal reinforced hose.
(5) When cutting metallic tubing you must switch to standard wheel furnished.
(5)
(5)
••
••
••
••
••
•
••
••
••
••
•
(5)
•
HARD
••
••
••
••
••
•
•
(5)
TYPE M
••
••
••
••
••
•
•
(5)
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
••
•
••
•
••
•
TUBING TOOL SELECTOR
TUBING TOOL SELECTOR
TUBING TOOL SELECTORTUBE MATERIAL
SIZE RANGE ANNEALED
ANNEALED
SAE 1020
BRAZED- STAINLESS
STAINLESS
TOOL
PART NO.
PAGE NO.
TUBE O.D. (in.) ALUMINUM
BRASS
STEEL
BUNDY WELDSTEEL ANNEALED
STEEL
(SOFT)
(SOFT)
(SOFT)
GM STEEL
(SOFT)
(1/8 HARD)
Tube Cutters
TC-1000
4
1/8 - 1-1/8
Metal Tubing
TC-1050
5
1/8 - 5/8
TC-1550
3
1/8 - 1-1/8
TC-2050
5
3/16 - 7/8
TC-3050
5
1/8 - 1-1/8
174-F
6
3/8 - 1-1/8
206-FB
6
3/8 - 2-5/8
227-FA
4
1/8 - 3/4
312-FC
4
1/4 - 1-5/8
406-FA
6
2 - 4-1/8
Tube Cutters
206-FBP
6
3/8 - 2-5/8
Thermoplastic
307-FP
7
1/16 - 1/2 (4)
Rubber Hose
327-FP
7
1/8 - 13/16 (4)
Saw Vise
384-FA
6
1/8 - 1-1/2
Bending Tools
101-F
10
1/4 - 5/8
102-F
10
1/4 - 7/8
112-F
10
1/4 - 3/8
163-F
10
1/4 - 5/8
201-F
10
1/4 - 7/8
260-FHA
14
1/4 - 7/8
270-F
15
3/8 - 1-1/8
350-FHA
14
1/4 - 3/4
360-FHA
14
3/8 - 3/4
364-FH
11
1/8 - 3/16
364-FHA
11
1/4 - 1 (3)
364-FHAM
11
6 -12 mm
364-FHB
11
1/4 - 1/2
364-FHBM
11
6 -12 mm
367-FH
10
1/8, 3/16, 1/4
368-FH
10
3/16, 1/4, 5/16, 3/8
370-FH
10
3/16, 1/4, 3/8, 1/2
470-FH
9
3/16,1/4, 5/16, 3/8
564-FH
13
3/8, 1/2
600-F
16
1/4 - 3/4
664-FH
12
1/4, 3/8, 1/2
664-FH(Metric)
12
6 - 12 mm
700-F
16
1/4 - 3/4
37° Flaring Tool
400-F
21
3/16 - 5/8
407-FA
22
1/8 - 1-1/2
437-FB
20
3/16 - 5/8
447-F
21
1/8 - 1/2
507-FB
20
3/16 - 5/8
507-FBM
20
6 - 16 mm
555-FS
23
3/16 - 5/8
537-F
22
3/4 - 1-1/4
637-F
22
1-1/4 - 2
2000-FS
28
1/8 - 3/4
45° Flaring Tool
103-FS
17
3/4 - 1
195-FC
17
3/16 - 5/8
203-FA
17
5/8 - 1-1/8
275-FS
24
1/8 - 3/4
275-FSM
24
4 - 22 mm
296-FC
17
3/16 - 5/8
300-FB
17
3/16 - 5/8
375-FS
17
1/8 - 3/4
376-FS
17
1/2 - 3/4
395-FAM
17
4 -16 mm
500-FC
18
3/16 - 5/8
500-FCM
18
6 -16 mm
525-F
18
3/16 - 5/8
4. 75 - 16 mm
555-F
23
3/16 - 5/8
2000-FS
28
1/8 - 3/4
45° Double
93-FB
19
3/16 - 1/2
Flaring Tools
195-FB
19
1/4 - 3/4
2000-FS
28
3/16 - 3/4
Reaming and
208-F
32
3/16 -1-1/2
Deburring Tools
208-FSS
32
3/16 -1-1/2
210-F
32
Tube Constrictor
TC-1020
4
1/8 - 1-1/8
Swaging Tools
93-S
26
3/16 - 7/8
94-SSP
26
1/2, 5/8, 7/8
95-S
26
3/16 -5/8
193-S
26
1/4 - 5/8
194-S
26
1/2 - 7/8
195-SA
26
1/4 - 5/8
275-FS
24
3/16 - 3/4
555-FS
23
3/16 - 5/8
2000-FS
28
3/16 - 3/4
Metric Bubble
293-F
23
4.75 - 10 mm
Flaring Tool
••
••
••
••
••
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
(5)
••
••
••
••
••
•
••
••
••
••
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
(5)
••
••
••
••
••
•
•
••
••
••
••
••
•
•
••
•
••
••
••
••
••
••
••
••
•
••
•
(5)
TITANIUM
(1) (1)(1)
(1) (1)(1)
(1) (1)(1)
(1) (1)(1)
•
••
•
•
•
••
•
•
•
••
•
•
••
•
••
••
••
•
••
••
••
•
•
••
•
•
••
••
•
•
•
••
••
••
•
•
••
•
••
••
••
•
•
••
•
••
••
••
•
•
••
•
••
•
••
••
•
••
•
•
•
••
••
••
•
•
(1) (1)(1)
(5)
(5)
(5)
(5)
(1) Heavy duty cutting wheel No. S75046 is recommended for continuous service with steel, stainless steel, monel, titanium and hard temper copper tubing.
(2) Type M tubing should be torch annealed before flaring.
(3) No.364-FHA, 5/8” - 1” size should be used only with annealed (softened) non-ferrous tubing.
(4) Not to be used with metal reinforced hose.
(5) When cutting metallic tubing you must switch to standard wheel furnished.
30
ACCESSORIES & WRENCHES
TESTING AND SERVICE TOOLS
PINCH-OFF TOOL
For 1/4” to 1/2” O.D. tubing.
Temporarily closes soft copper, aluminum or steel tubing so no liquid or gas passes sealed
part. Lets you disconnect Iine while making repairs without loss of liquid or gas. Forming
holes for 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing.
105-FF
Pinch-Off Tool for 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing. Wt. .75 lbs.
105-FF
TUBING TEST PLUGS
For 1/4” to 1-5/8” O.D. tubing.
For temporary shut-off of tubing without pinching it off or installing a valve. Especially handy
for plumbing, heating, refrigeration and instrumentation when troubleshooting for leaks.
Lightweight, fast acting, dependable. Insert plug in tube end and tighten wing nut. Expander
seals tube and holds pressures to 100 PSI.
142-F
3-Pc. test plug kit for 1/2”, 5/8” and 7/8” O.D. tubing. Wt. .5 lbs.
INDIVIDUAL TEST PLUGS
PART NO.
TUBE O.D. (in.)
MIN I.D. DIA. (in.)
140-F-041/4
140-F-063/8
140-F-081/2
140-F-105/8
140-F-123/4
140-F-147/8
140-F-181-1/8
140-F-221-3/8
140-F-261-5/8
.171
.265
.390
.515
.640
.734
.984
1.218
1.453
MAX I.D. DIA. (in.)
.190
.315
.436
.545
.745
.995
1.245
1.270
1.505
WEIGHT EACH (oz.)
.5
.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
140-F-06
REPLACEMENT SLEEVE
S62641
S62648
S62655
S62661
S62666
S66434
S66435
S71174
S71177
142-F
45° REFACING TOOL
For 1/4”, 5/16”, 3/8” and 1/2” SAE 45° flare fittings.
Makes nicked or marred seats on brass and other nonferrous fittings and valves as
good as new. Precision feed. Replaceable cutter.
345-FA
With cutter and adapters for 1/4”, 5/16”, 3/8”,1/2” and 5/8” fittings.
Includes metal tool case. Wt. 2.0 Ibs.
Replacement Parts: 346-F-04 Adapter 1/4”
346-F-05 Adapter 5/16”
346-F-06 Adapter 3/8”
346-F-08 Adapter 1/2”
346-F-10 Adapter 5/8”
S63412Cutter
31
345-FA
ACCESSORIES & WRENCHES
TUBE DEBURRING
DEBURRING TOOL
210-F
The rotary style blade is perfect for removing burrs from holes and edges. Large
ergonomic handle reduces user fatigue. Ships complete with two heavy duty
blades - extra blade stores inside the handle. For copper, steel, aluminum, zinc,
cast iron, brass and plastic tubing. Length 5-3/4”. Wt. 1.5 oz.
210-F
Extra blade includedstores inside the handle.
S10001087 -Deburr Replacement Blade
INNER-OUTER REAMING AND DEBURRING TOOLS
For 3/16” to 1-1/2” (5 mm to 38 mm) O.D. tubing.
Reams both inside and outside edges of tube at a 60° included angle with 3 hardened cutting
blades. Tough die cast body. Deburrs both clockwise and counterclockwise. Fluted body is shaped
to fit comfortably in palm.
208-F
Reamer for copper, aluminum and brass tubing. Hardened steel cutter blades.
Blue finish. Wt. .63 lbs.
208-FSS Reamer for aircraft grade stainless steel tubing, hard or soft copper, aluminum,
brass and steel tubing. Tungsten hardened tool steel cutter blades. Black finish.
Wt. .63 lbs.
208-F
32
ACCESSORIES & WRENCHES
For tube fittings, valves, nuts and bolts.
WRENCHES
Square ratchet drives for use on compressors
with access valves in hard to reach places
WRENCHES
For Refrigeration and Air Conditioning Service.
127-C
Compressor access valve wrench. Chrome plated. Has 1/4”, 3/8”, 3/16”
and 5/16” square drive ratchets and is specially designed for use on
compressors with access valves in hard to reach places. Reversible ratchets.
Reversible
ratchets
127-CO
127-C
Same as 127-C except with unique 25° offset that provides additional
convenience in hard to reach places.
127-CO
124-C
Combination wrench with the four sizes most needed for
servicing air-conditioning and refrigerator equipment:
• 9/16” hex for dust cap on access valves and plug oil check on compressor.
• 1/2” hex for compressor mounting bolts.
• 1/4” square for valve stem and service valves and old style compressor valves.
• 3/16” square for valve refrigerant charging tanks.
125-C
Rugged, steel forged wrench with four sizes covering almost any application.
Ratchet has 1/4” square drive on one end; other end has 3/16” and 5/16” square
openings, plus 9/16” hex opening.
124-C
125-C
126-C
Economy compressor access valve wrench. Chrome plated. Has 1/4”, 3/8”,
3/16” and 5/16” square drive ratchets and is specially designed for use on
compressors with access valves in hard to reach places. Reversible ratchets.
126-C
IMPERIAL® TOOL BAG
15-POCKET PROFESSIONAL TOOL BAG
TB-52 Tool Bag
•8”W x 16” L x 11” D.
•Double layered ballistic nylon.
•Wide opening mouth.
•Padded handles and 48” shoulder strap.
•Designed to hold tools.
•Tools not included!
TB-52
33
ACCESSORIES & WRENCHES
For tube fittings, valves, nuts and bolts.
RATCHET WRENCHES
195-F KWIK-TITE® RATCHET WRENCHES
For 5/16” to 2-1/4” and 7 mm to 32 mm hex sizes.
The Kwik-Tite ratchet wrench speeds installation of tube fittings and valves, hex nuts, bolts and fasteners. This unique wrench, with its
open jaw design, makes it easy to slip onto fittings and fasteners, even in tight quarters. Flips quickly into tightening position with a sure
grip on all hex surfaces.
12-point contact distributes torque pressures evenly on the flats of the hex, not at the corners. Eliminates warping and distorting
of fittings and fasteners. Because of the Kwik-Tite ratchet action, tightening jobs are easier and faster.
Kwik-Tite wrenches are constructed for rugged use. Jaws are hardened steel. Handles are made of heavy
gauge alloy steel, with a black oxide finish.
SAE
PART NO.
195-F 05
195-F 06
195-F 07
195-F 08
195-F 09
195-F 10
195-F 11
195-F 12
195-F 13
195-F 14
195-F 15
195-F 16
195-F 17
195-F 18
195-F 19
195-F 20
195-F 22
195-F 24
195-F 26
195-F 28
195-F 30
195-F 32
195-F 34
195-F 36
HEX SIZE
OVERALL
LENGTH (in.)
5/165-1/2
3/85-1/2
7/165-3/8
1/25-1/2
9/167-1/4
5/87-5/32
11/167-1/4
3/47-5/16
13/169-1/8
7/89-3/32
15/169-1/4
19-9/32
1-1/1613.59
1-1/813.59
1-3/1613.59
1-1/413.59
1-3/813.84
1-1/213.84
1-5/813.84
1-3/414.21
1-7/814.21
214.21
2-1/814.53
2-1/414.53
(in.)
Ratcheting of wrench requires
only 30° of movement.
195-F 12
(1)
195-F 22 mm
(2)
(1)5/16” - 3/4” sizes have two-tone grips as shown.
(2)13/16” - 1” sizes do not have grips.
(3)1-1/16” - 2-1/4” sizes have foam grips (not shown).
METRIC
OVERALLOVERALL
PART NO.
HEX SIZE LENGTH
LENGTH
195-F 07 mm
195-F 08 mm
195-F 09 mm
195-F 10 mm
195-F 11 mm
195-F 12 mm
195-F 13 mm
195-F 14 mm
195-F 15 mm
195-F 16 mm
195-F 17 mm
195-F 18 mm
195-F 19 mm
195-F 21 mm
195-F 22 mm
195-F 23 mm
195-F 24 mm
195-F 27 mm
195-F 30 mm
195-F 32 mm
(mm)(mm) (in.)
7140.725.54
8140.725.54
9140.725.54
10140.72 5.54
11140.72 5.54
12140.72 5.54
13140.72 5.54
14187.45 7.38
15187.45 7.38
16187.45 7.38
17187.45 7.38
18187.45 7.38
19187.45 7.38
21237.50 9.35
22237.50 9.35
23237.50 9.35
24237.50 9.35
27345.1913.59
30345.1913.59
32345.1913.59
(1)7 mm - 19 mm sizes have two-tone grips as shown.
(2)21 mm - 24 mm sizes do not have grips.
(3)27 mm - 32 mm sizes have foam grips (not shown).
195-7STDS KIT
195-5STDM KIT
KWIK-TITE® RATCHET WRENCH KITS
PART NO.
DESCRIPTION
WEIGHT
(lbs.)
195-4STDS KIT
195-5STDM KIT
4-Pc. SAE kit for refrigeration in pouch. Contains 5/8”, 13/16”,
15/16”, and 1-1/16” wrenches. (Not shown).
5-Pc. metric kit in pouch. Contains 10 mm, 11 mm,
12 mm,13 mm and 14 mm wrenches.
2.3
195-7STDS KIT
7-Pc. SAE kit in pouch. Contains 3/8”, 7/16”, 1/2”,
9/16”, 5/8”,11/16” and 3/4” wrenches.
2.5
2
34
REFRIGERATION AND
AIR-CONDITIONING PRODUCTS
35
36
MANIFOLDS
SERVICE MANIFOLDS
800 SERIES DEEP DRAW 4-VALVE MANIFOLD
Non-flutter gauges with
high-visibility faceplate
•4-Valve Efficiency - Vacuum, low side, high side, and refrigerant lines are individually
connected and controlled. No need to switch charging lines.
•4 Times Faster Evacuation - 3/8” vacuum port and oversize internal passages evacuate
systems four times faster than ordinary manifolds. 3/8” port has greater area than
combined inlets of high and low side lines.
•Unique Deep Draw Vacuum Valve Design - Proven diaphragm-type, soft-seat valves
require only fingertip pressure to close completely. One turn to full open/close. Superior
for deep vacuum service.
•Precision Gauges & Protective Boots - Unique design with easy to read color-coded
scales provides superior resistance to shock, vibration and pulsation for superior performance
and extended gauge life.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure, 4,000 PSI
burst pressure (not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with oily fingers.
•Swivel Hanger
Gauge boots are standard
on 4-valve manifolds
800 PSI working and 4,000
PSI burst pressure hoses
Rugged lightweight body
features laser-etched graphics
3/8” vac port and hose
for faster evacuation
800 SERIES DEEP DRAW 4-VALVE MANIFOLD - See page 44 for additional models and details
PART NO.
REFRIGERANT
CHARGING LINES
820-C*
R-12, R-22, R-502
820-CS* (w/Sight Glass)
R-12, R-22, R-502
821-C*
R-12, R-22, R-502
4-60” (3/8” VAC)
821-CS* (w/Sight Glass)
R-12, R-22, R-502
4-60” (3/8” VAC)
822-C (w/Carrying Case)
R-12, R-22, R-502
4-60” (3/8” VAC)
829-C*
R-12, R-22, R-502
3-60” w/Low Loss Shut-Off Couplers,
1-60” 3/8” VAC Line
830-CKP*
R-134a
830-CKPS* (w/Sight Glass) R-134a
831-CKP*
R-134a
4-60” (3/8” VAC)
831-CKPS* (w/Sight Glass) R-134a
4-60” (3/8” VAC)
840-C*
R-410A
841-C*
R-410A
4-60” (3/8” VAC)
841-CM
R-410A
4-60” (B, R: 1/4” x 5/16” SAE,
Y: 1/4” x 1/4”, 3/8” VAC Line)
842-C*
R-410A
3-60” w/Low Loss Ball Valve Shut-Off,
1-60” 3/8” VAC Line
844-C*
R-410A, R-22, R-404A
4-60” (3/8” VAC)
844-CS* (w/Sight Glass)
R-410A, R-22, R-404A
4-60” (3/8” VAC)
845-C*
R-410A, R-22, R-404A
846-C*
R-410A, R-22, R-404A
3-60” w/Low Loss Ball Valve Shut-Off,
1-60” 3/8” VAC Line
850-C*
R-404A, R-507, R-134a
851-C*
R-404A, R-507, R-134a
4-60” (3/8” VAC)
852-C*
R-404A, R-507, R-134a
3-60” w/Low Loss Shut-Off Couplers,
1-60” 3/8” VAC Line
853-C (w/Carrying Case)
R-404A, R-507, R-134a
4-60” (3/8” VAC)
* Add “C” suffix for clamshell packaging
37
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
MANIFOLD PORT
Larger knobs with
soft-touch grip surface
Diaphragm design allows
finger touch operation
and 1 turn for full open
CONNECTIONS
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
DIAPHRAGM TYPE SOFT SEAT VALVES
Fingertip pressure to close completely
One turn to full open
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
3/8” vacuum port and oversized passages evacuate system
4 times faster than ordinary manifolds
MANIFOLDS
SERVICE MANIFOLDS
700 SERIES KWIK-CHARGER™ MANIFOLD
Non-flutter gauges with
high-visibility faceplate
Charging the system is faster and easier than ever using
Imperial® manifolds with built-in liquid low side charger.
•Dual Action Valve - Operates as a conventional manifold, or engage the special
Gauge boots are
control valve and the manifold accepts liquid refrigerant from cylinder and discharges
standard with all
into the low side of the system. Charging rate is up to eight times faster than
Kwik-Charger™ manifolds
vapor charging.
•Safe - Internal metering element reduces liquid flow to a level below capacity of the
compressor. Assures a safe, fast charge without endangering the compressor.
•All-In-One - No connecting or disconnecting special adapters for charging new blended
refrigerants.
•No Pressure Drop-In Cylinder - No need to heat refrigerant cylinder.
•Works With All Refrigerants - CFC, HFC, HCFC, Zeotropic and Azeotropic.
•Filters In All Manifold Port Fittings - To keep out particulate material that may be
present during recovery or reclaim or in recovered refrigerant. Filters are easily
serviceable.
•Deep Vacuum Valve Design - Proven diaphragm-type, soft-seat valves require
only fingertip pressure to close completely. One turn to full open/close. Superior for
deep vacuum service.
•Precision Gauges & Protective Boots - Unique gauges provide superior
resistance to shock, vibration & pulsation for accurate performance and extended
gauge life.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure, 4,000 PSI
burst pressure (not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with oily fingers.
• Swivel Hanger
Rugged lightweight body
features laser-etched graphics
Diaphragm design allows
finger touch operation
and 1 turn for full open
700 SERIES KWIK-CHARGER™ MANIFOLD - See page 44 for details
PART NO.
REFRIGERANT
CHARGING LINES
800 PSI working and 4,000
PSI burst pressure hoses
Integrated patented
feature allows charging
up to 8x faster
MANIFOLD PORT
CONNECTIONS
715-CC
R-410A, R-22, R-404A
1/4” SAE
R-410A, R-22, R-404A 3-60”
R-410A, R-22, R-404A 3-60” w/Low Loss Ball Valve Shut-Off
R-12, R-22, R-502
R-12, R-22, R-502
3-60”
R-12, R-22, R-502
3-60” w/Low Loss Shut-Off Couplers
R-404A, R-407C, R-134a
R-410A
R-410A
3-60” (1/4” x 5/16”)
R-404A, R-507, R-134a
R-404A, R-507, R-134a 3-60”
R-404A, R-507, R-134a 3-60” w/Low Loss Shut-Off Couplers
R-404A, R-507, R-22
3-60”
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
717-CC
718-CC
720-CC
721-CC
725-CC
740-CBC
745-CBC
745-CKPC
750-CC
751-CC
755-CC
762-CKPC
Larger knobs with
soft-touch grip surface
Patented metering device
converts liquid to vapor
All Kwik-Charger™ manifolds are in clamshell packaging
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
38
MANIFOLDS
SERVICE MANIFOLDS
600 SERIES 4-VALVE MANIFOLD
Larger knobs with
soft-touch grip surface
Non-flutter gauges with
high-visibility faceplate
•4-Valve Efficiency - Vacuum, low side, high side, and refrigerant lines are individually
connected and controlled. No need to switch charging lines.
•4 Times Faster Evacuation - 3/8” vacuum port and oversize internal passages evacuate
systems four times faster than ordinary manifolds. 3/8” port has greater area than
combined inlets of high and low side lines.
•Deep Vacuum Valve Design - Proven diaphragm-type, soft-seat valves require only
fingertip pressure to close completely. One turn to full open/close. Superior for deep
vacuum service.
•Precision Gauges & Protective Boots - Unique design with easy to read color-coded
scales provides superior resistance to shock, vibration and pulsation for superior performance
and extended gauge life.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure, 4,000 PSI
burst pressure (not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with oily fingers.
•Swivel Hanger
Gauge boots are standard
on 4-valve manifolds
Rugged lightweight body
features laser-etched graphics
800 PSI working and 4,000
PSI burst pressure hoses
Diaphragm design allows
finger touch operation
and 1 turn for full open
3/8” vac port and hose
for faster evacuation
600 SERIES 4-VALVE MANIFOLD - See page 44-45 for additional models and details
DIAPHRAGM TYPE SOFT SEAT VALVES
PART NO.
REFRIGERANT
CHARGING LINES
620-C*
R-12, R-22, R-502
620-CS* (w/Sight Glass)
R-12, R-22, R-502
621-C*
R-12, R-22, R-502
4-60” (3/8” VAC)
621-CS* (w/Sight Glass)
R-12, R-22, R-502
4-60” (3/8” VAC)
622-C (w/Carrying Case)
R-12, R-22, R-502
4-60” (3/8” VAC)
629-C*
R-12, R-22, R-502
3-60” w/Low Loss Shut-Off Couplers,
1-60” 3/8” VAC Line
630-CKP*
R-134a
630-CKPS* (w/Sight Glass) R-134a
631-CKP*
R-134a
4-60” (3/8” VAC)
631-CKPS* (w/Sight Glass) R-134a
4-60” (3/8” VAC)
640-C*
R-410A
641-C*
R-410A
4-60” (3/8” VAC)
642-C*
R-410A
3-60” w/Low Loss Ball Valve Shut-Off,
1-60” 3/8” VAC Line
644-C*
R-410A, R-22, R-404A
4-60” (3/8” VAC)
644-CS* (w/Sight Glass)
R-410A, R-22, R-404A
4-60” (3/8” VAC)
645-C*
R-410A, R-22, R-404A
646-C*
R-410A, R-22, R-404A
3-60” w/Low Loss Ball Valve Shut-Off,
1-60” 3/8” VAC Line
650-C*
R-404A, R-507, R-134a
651-C*
R-404A, R-507, R-134a
4-60” (3/8” VAC)
652-C*
R-404A, R-507, R-134a
3-60” w/Low Loss Shut-Off Couplers,
1-60” 3/8” VAC Line
653-C (w/Carrying Case)
R-404A, R-507, R-134a
4-60” (3/8” VAC)
* Add “C” suffix for clamshell packaging
39
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
MANIFOLD PORT
CONNECTIONS
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
Fingertip pressure to close completely
One turn to full open
3/8” vacuum port and oversized passages evacuate system
4 times faster than ordinary manifolds
MANIFOLDS
SERVICE MANIFOLDS
510 SERIES 2-VALVE / 4-PORT R-410A MANIFOLDS
•Auxiliary Valve Port - Allows multiple hookups for vacuum gauge, vacuum pump,
recovery unit and add-ons.
•Dual O-Ring Seal - For high-pressure valve use. Electroless nickel plate stem to
reduce wear and gauling.
•Precision Gauges & Protective Boots - Unique design with easy to read color-coded
scales provides superior resistance to shock, vibration & pulsation for superior
performance and extended gauge life.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure, 4,000 PSI
burst pressure (not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with oily fingers.
•Swivel Hanger
510 SERIES 2-VALVE/4-PORT R-410A MANIFOLDS - See page 45 for additional models and details
PART NO.
REFRIGERANT
CHARGING LINES
510-C*
R-410A
1/4” SAE
510-CM*
511-C*
511-CM*
512-C*
513-C*
R-410A
R-410A
3-60”
R-410A
3-60”
R-410A
3-60” w/Low Loss Ball Valve Shut-Off
R-410A
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
5/16” SAE
MANIFOLD PORT
CONNECTIONS
Auxiliary valve port
* Add “C” suffix for clamshell packaging
520 SERIES 2-VALVE / 4- OR 5-PORT MANIFOLDS
•Two Integrated Auxiliary Ports - Provide additional hookups for use with a
micron (vacuum) gauge, vacuum pump, adding tracer dye, adding oil, purging
non-condensables.
•Deep Vacuum Valve Design - Proven diaphragm-type, soft-seat valves require
only fingertip pressure to close completely. One turn to full open/close. Superior for
deep vacuum service.
•Precision Gauges & Protective Boots - Unique design with easy to read color-coded
scales provides superior resistance to shock, vibration and pulsation for superior
performance and extended gauge life.
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with oily fingers.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure, 4,000 PSI
burst pressure (not all models include hose).
•Swivel Hanger
Integrated
auxiliary ports
520-CA and 521-CA Combination R-134a & R-12 manifolds for automotive service.
See page 39.
520 SERIES 2-VALVE/ 4- OR 5-PORT MANIFOLDS - See page 45 for additional models and details
PART NO.
# OF PORTS REFRIGERANT
CHARGING LINES
MANIFOLD PORT
CONNECTIONS
520-C* (w/Sight Glass)
5
R-12, R-22, R-502
1/4” SAE
520-CA* (w/Sight Glass)
520-CAM* (w/Sight Glass)
521-C* (w/Sight Glass)
521-CA* (w/Sight Glass)
521-CAM* (w/Sight Glass)
4
4
5
4
4
R-134a, R-12
R-134a, R-12
R-12, R-22, R-502 3-60”
R-134a, R-12
3-60” w/Auto Service Couplers
R-134a, R-12
3-60” w/Auto Service Couplers
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
Sight Glass included in all
520 series manifolds
* Add “C” suffix for clamshell packaging
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
40
MANIFOLDS
SERVICE MANIFOLDS
400 SERIES DELUXE 2-VALVE BRASS MANIFOLD
•Dual O-Ring Valves - Precision engineered with dynamic full-flow design for faster trouble free evacuation and charging.
•Precision Gauges & Protective Boots - Unique design with easy to read color-coded
scales provides superior resistance to shock, vibration and pulsation for superior performance
and extended gauge life.
•Soft-Seat Valves - Seat tightly with fingertip pressure.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure,
4,000 PSI burst pressure (not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with
oily fingers.
•Swivel Hanger
Non-flutter gauges with
high-visibility faceplate
Gauge boots are standard
on 400 and 500 Series
Larger knobs with
soft-touch grip surface
Needle valve design
with full-flow porting
800 PSI working and 4,000
PSI burst pressure hoses
Built-in hose hangers
on back of manifold
400 SERIES DELUXE 2-VALVE BRASS MANIFOLD - See page 46 for additional models and details
PART NO.
REFRIGERANT
CHARGING LINES
415-C*
MANIFOLD PORT
R-410A
416-C*
R-410A
3-36”
417-C*
R-410A
3-60”
418-C*
R-410A3-60” w/Low Loss Ball Valve Shut-Off
420-C*
R-410A, R-22, R-404A
421-C*
R-410A, R-22, R-404A
3-60”
422-C*
R-410A, R-22, R-404A
3-60” w/Low Loss Ball Valve Shut-Off
435-CKP*
R-134a
436-CKP*
R-134a
3-36”
450-C*
R-404A, R-507, R-134a
451-C*
R-404A, R-507, R-134a 3-36”
452-C*
R-404A, R-507, R-134a 3-60”
481-CKPC
R-22, R-134a, R-404A
482-CKP*
R-22, R-134a, R-404A
3-36”
494-C (body only)
495-C*
R-12, R-22, R-502
496-C*
R-12, R-22, R-502
3-36”
498-C*
R-12, R-22, R-502
2-36”, 1-60”
500-C*
R-12, R-22, R-502
3-60”
505-C*
R-12, R-22, R-502
3-60” w/Low Loss Shut-Off Couplers
* Add “C” suffix for clamshell packaging
41
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
CONNECTIONS
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
Side view cutaway dual o-ring valve with full flow porting
MANIFOLDS
SERVICE MANIFOLDS
300 SERIES ECONOMY BRASS MANIFOLDS
Non-flutter gauges with
high-visibility faceplate
•Soft Seat Valve - Brass stem with long wearing soft tip seats tightly,
with fingertip pressure.
•Precision Gauges - Unique design with easy to read
color-coded scales provides superior resistance to shock,
vibration & pulsation for superior performance and
extended gauge life.
•Premium Hose - 600 PSI working pressure, 3,000 PSI burst pressure
(not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface,
even with oily fingers.
•Dual O-Ring Seal Valves
•Swivel Hanger
Needle valve design
with full-flow porting
600 PSI working and 3,000 PSI burst
pressure hose
Larger knobs with
soft-touch grip surface
300 SERIES ECONOMY BRASS MANIFOLD - See page 46 for additional models and details
PART NO. REFRIGERANT
335-CKP*
336-CKP*
395-C*
395-CD*
395-CKP*
396-C*
396-CD*
396-CKP*
397-CD
398-CC
398-CD
398-CKP*
CHARGING LINES
MANIFOLD PORT
CONNECTIONS
R-134a
R-134a
3-36”
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
3-36”
R-12, R-22, R-502
3-36”
R-12, R-22, R-502
3-36”
R-12, R-22, R-502
3-72”
R-12, R-22, R-502
3-60”
R-12, R-22, R-502
3-60”
R-22, R-134a, R-404A
3-36”
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
* Add “C” suffix for clamshell packaging
SINGLE GAUGE CHARGING AND TESTING UNIT
A compact, single gauge unit which will perform a variety of charging
and testing operations. Body is forged brass, with 1/4” SAE port flare
connections.
•Soft-Seat Valve – Brass stem with long wearing soft tip seats tightly, with fingertip pressure.
•Ergonomic Handle - Durable, soft-touch non-slip surface, even with oily fingers.
•Swivel Hanger
466-C
401-C
Charging and Testing Unit with 425-CB, 2-1/2” compound gauge.
0 -30” vacuum, 0-120 Ibs. pressure.
Charging and Testing Unit without gauge.
466-C
42
MANIFOLDS
AUTOMOTIVE SERVICE MANIFOLDS & ACCESSORIES
520 SERIES 2-VALVE 4-PORT SERVICE MANIFOLDS
•Deep Vacuum Valve Design - Proven diaphragm-type, soft-seat valves require only fingertip
pressure to close completely. One turn to full open/close. Superior for deep vacuum service.
•Precision Gauges & Protective Boots - Unique design with easy to read color-coded
scales provides superior resistance to shock, vibration and pulsation for superior performance
and extended gauge life.
•PolarShield® Hi-Performance Hoses ® - 800 PSI working pressure, 4,000 PSI
burst pressure (not all models include hose).
•Ergonomic Handles - Durable, soft-touch non-slip surface, even with oily fingers.
• Swivel Hanger
520 SERIES 2-VALVE 4-PORT MANIFOLD - See page 45 for details
PART NO.
REFRIGERANT
CHARGING LINES
520-CA* (w/Sight Glass)
520-CAM* (w/Sight Glass)
521-CA* (w/Sight Glass)
521-CAM* (w/Sight Glass)
MANIFOLD PORT
CONNECTIONS
R-134a, R-12
R-134a, R-12
R-134a, R-12
3-60” w/R-134a Auto Service Couplers
R-134a, R-12
3-60” w/R-134a Auto Service Couplers
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
521-CA
* Add “C” suffix for clamshell packaging
Sight Glass included in all
520 series manifolds
Auxiliary valve port
AUTOMOTIVE R-134a HOSE FOR USE WITH CONVENTIONAL
MANIFOLDS EQUIPPED WITH 1/4” SAE PORTS ®
Red and blue hose supplied with 1/4” SAE FFL x 14 mm male connections. Yellow
hose supplied with 1/4” SAE FFL x 1/2” ACME female with ball valve (BV) shut-off.
LENGTH
BLUE
YELLOW W/BV
RED
SET OF THREE (B,Y,R)
3’ (36”)
803-MAB
803-MAY
803-MAR
803-MAS
5’ (60”)
6’ (72”)
805-MAB
806-MAB
805-MAY
806-MAY
805-MAR
806-MAR
805-MAS
806-MAS
Yellow hose supplied
with ball valve shut-off
805-MAY
AUTOMOTIVE KWIK-COUPLER™ ADAPTER
FOR R-12 ®
AUTOMOTIVE R-134a HOSE FOR USE WITH MANIFOLDS
EQUIPPED WITH 1/2” ACME PORTS ®
803-AR/803-AB
Red and blue hose supplied with 1/2” ACME female x 14 mm male connections.
Yellow hose supplied with 1/2” ACME x 1/2” ACME female with ball valve
(BV) shut-off.
LENGTH
BLUE
YELLOW W/BV
RED
SET OF THREE (B,Y,R)
3’ (36”)
803-AB
803-AY
803-AR
803-AS
6’ (72”)
806-AB
806-AY
806-AR
806-AS
PREMIUM R-134a HI-FLOW AUTO SERVICE COUPLERS
14 mm thread connection. Quick connect/disconnect valve actuation eliminates
venting. Color-coded knobs for high/low connections.
• Integral safety sleeve prevents accidental refrigerant venting under
all operating conditions.
• Provides maximum flow without damaging service port.
• Meets current SAE-J639 specifications.
21-L
21-H
43
Low side service coupler.
High side service coupler.
®
Recognized Component. ®
19-C
21-L
20-A High side adapter. Converts 3/16” system access
valve to 1/4” access valve for use with standard
1/4” charging hose.
20-A
21-H
is a registered trademark of Underwriters Laboratories Inc.
19-C (Set) Includes special female coupler for use on
3/16” automotive high side access valves, 1/4”
low side coupler, straight and 90° male couplers.
MANIFOLDS REFERENCE GUIDES
SERVICE MANIFOLDS REFERENCE GUIDE
PART NO.
REFRIGERANT
PSI
GAUGE CALIBRATION** TEMP
BAR Kg/cm² kPa MPa °F °C
CHARGING LINES
··
··
···
··
···
···
··
···
···
··
···
··
···
···
···
··
··
··
··
·
··
··
··
8 0 0 S E R I E S D E E P D R A W 4 - V A LV E M A N I F O L D
R-12, R-22, R-502
820-C*
820-CB
820-CK*
820-CKP*
820-CM*
820-CS* (w/Sight Glass)
821-C*
821-C-6
821-CD*
821-CK*
821-CKP*
821-CM*
821-CS* (w/Sight Glass)
822-C (w/Carrying Case)
822-CKP (w/Carrying Case)
829-C*
R-134a
830-CKP*
830-CKPS* (w/Sight Glass)
831-CKP*
831-CKPS* (w/Sight Glass)
R-410A
840-C*
840-CB
840-CKPSC † (w/Sight Glass)
841-C*
841-CKPSC † (w/Sight Glass)
841-CM
842-C*
R-22, R-134a, R-404A
843-CS (w/Sight Glass)
R-410A, R-22, R-404A
844-C*
844-CS* (w/Sight Glass)
845-C*
846-C*
846-CS (w/Sight Glass)
R-404A, R-507, R-134a
850-C*
851-C*
852-C*
853-C (w/Carrying Case)
·
·
· ·
· ··
·
·
···
··
· ··
···
R-134a
R-134a
R-134a
R-134a
R-410A
R-410A
R-410A
R-410A
R-410A
R-410A
R-410A
R-22, R134a, R-410A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-410A, R-22, R-404A
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-22, R-407C, R-410A
R-404A, R-407C, R-134a
R-404A, R-407C, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-404A, R-507, R-134a
R-410A
R-410A
R-22, R-404A, R-507
6 0 0 S E R I E S 4 - V A LV E M A N I F O L D
R-12, R- 22, R-502
620-C*
620-CB
620-CK*
620-CKP*
620-CM*
620-CS* (w/Sight Glass)
621-C*
621-C-6
···
·
···
·
···
··
···
··
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-72” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
3-60” w/Low Loss Fittings, 1-60” 3/8” VAC Line
4-60” (3/8” VAC)
4-60” (3/8” VAC)
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
5/16” & 3/8” SAE
4-60” (3/8” VAC)
1/4” & 3/8” SAE
4-60” (B, R, Y 5/16”; 3/8” VAC)
5/16” & 3/8” SAE
4-60” (B, R 1/4” x 5/16”; Y 1/4” x 1/4”; 3/8” VAC) 1/4” & 3/8” SAE
3-60” w/BV, 1-60” 3/8” VAC Line
1/4” & 3/8” SAE
700 SERIES KWIK-CHARGER™ MANIFOLD
R-410A, R-22, R-404A
715-CC †
717-CC †
718-CC †
R-12, R-22, R-502
720-CC †
721-CC †
725-CC †
R-22, R-407C, R-410A
726-CC †
R-404A, R-407C, R-134a
740-CBC †
741-CBC †
R-404A, R-507, R-134a
750-CC †
751-CC †
755-CC †
R-410A
745-CBC †
745-CKPC †
R-22, R-404A, R-507
762-CKPC †
·
··
·
··
··
···
··
···
··
···
··
···
·
···
···
MANIFOLD PORT
(BV = Low Loss Ball Valve Shut-Off)CONNECTIONS
4-60” (3/8” VAC)
1/4” & 3/8” SAE
4-60” (3/8” VAC)
4-60” (3/8” VAC)
3-60” w/BV, 1-60” 3/8” VAC Line
3-60” w/BV, 1-60” 3/8” VAC Line
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
4-60” (3/8” VAC)
3-60” w/Low Loss Fittings, 1-60” 3/8” VAC Line
4-60” (3/8” VAC)
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
3-60”
3-60” w/BV
1/4” SAE
1/4” SAE
1/4” SAE
3-60”
3-60” w/Low Loss Fittings
1/4” SAE
1/4” SAE
1/4” SAE
··
·
··
·
··
·
···
·
5-36” (B, R, Y 1/4” x 1/4”; B, R 1/4” x 5/16”)
1/4” SAE
3-60”
1/4” SAE
1/4” SAE
3-60”
3-60” w/Low Loss Fittings
1/4” SAE
1/4” SAE
1/4” SAE
3-60” (1/4” x 5/16”)
1/4” SAE
1/4” SAE
1/4” SAE
··
· ··
·
···
·
·
···
3-60”
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
4-60” (3/8” VAC)
R-12, R-22, R-502
4-72” (3/8 VAC)
* Add “C” suffx for clamshell packaging. † Clamshell packaging only. * *All gauges available with MPa, kPa, Bar, etc.
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
44
MANIFOLDS REFERENCE GUIDES
SERVICE MANIFOLDS REFERENCE GUIDE
PART NO.
REFRIGERANT
PSI
GAUGE CALIBRATION** TEMP
BAR Kg/cm² kPa MPa °F °C
··
···
··
···
··
···
··
···
··
··
··
··
··
···
··
·
···
··
···
···
··
·
6 0 0 S E R I E S 4 - V A LV E M A N I F O L D ( C O N T. )
· ·· · ··
·
·
·
· ·· ·
·
··· ··· ···
·· ·· ··
·· ·· ···
·· ·· ·
···
··
·
· · ··· ·
··
··
·· ·· ·· ··
·
· ·· ·
··
· ··
··
··
··
·· · ·· ···
··· · ··· ····
·· ·· ···
·· ·· ··
·
·
CHARGING LINES
R-12, R- 22, R-502
621-CD*
R-12, R-22, R-502
4-60” (3/8” VAC)
621-CK*
R-12, R-22, R-502
4-60” (3/8” VAC)
621-CKP*
R-12, R-22, R-502
4-60” (3/8” VAC)
621-CM*
R-12, R-22, R-502
4-60” (3/8” VAC)
621-CS* (w/Sight Glass)
R-12, R-22, R-502
4-60” (3/8” VAC)
622-C (w/Carrying Case)
R-12, R-22, R-502
4-60” (3/8” VAC)
622-CKP (w/Carrying Case)
R-12, R-22, R-502
4-60” (3/8” VAC)
629-C*
R-12, R-22, R-502
3-60” w/Low Loss Fittings, 1-60” 3/8” VAC Line
R-22, R-407C, R-410A
626-CSC †
R-22, R-407C, R-410A
6-36” (B, R, Y 1/4” x 1/4”; B, R 1/4” x 5/16”; 3/8” VAC)
R-134a
630-CKP*
R-134a
630-CKPS* (w/Sight Glass)
R-134a
631-CKP*
R-134a
4-60” (3/8” VAC)
631-CKP-6
R-134a
4-72” (3/8” VAC)
631-CKPS* (w/Sight Glass)
R-134a
4-60” (3/8” VAC)
R-410A
640-C*
R-410A
640-CB
R-410A
641-C*
R-410A
4-60” (3/8” VAC)
641-CM
R-410A
4-60” (B, R 1/4” x 5/16”; Y 1/4” x 1/4”; 3/8” VAC)
642-C*
R-410A
3-60” w/BV, 1-60” 3/8” VAC Line
R-410A, R-22, R-404A
644-C*
R-410A, R-22, R-404A
4-60” (3/8” VAC)
644-CS* (w/Sight Glass)
R-410A, R-22, R-404A
4-60” (3/8” VAC)
645-C*
R-410A, R-22, R-404A
646-C*
R-410A, R-22, R-404A
3-60” w/BV, 1-60” 3/8” VAC Line
R-404A, R-407C, R-134a
660-CB
R-404A, R-407C, R-134a
R-404A, R-507, R-134a
650-C*
R-404A, R-507, R-134a
651-C*
R-404A, R-507, R-134a
4-60” (3/8” VAC)
651-CKPSC † (w/Sight Glass) R-404A, R-507, R-134a
4-60” (3/8” VAC)
652-C*
R-404A, R-507, R-134a
3-60” w/Low Loss Fittings, 1-60” 3/8” VAC Line
653-C (w/Carrying Case)
R-404A, R-507, R-134a
4-60” (3/8” VAC)
R-22, R-134a, R-404A
680-CKPSC † (w/Sight Glass) R-22, R-134a, R-404A
681-CKPSC † (w/Sight Glass) R-22, R-134a, R-404A
4-60” (3/8” VAC)
·
·
MANIFOLD PORT
(BV = Low Loss Ball Valve Shut-Off)CONNECTIONS
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
1/4” & 3/8” SAE
5 2 0 S E R I E S 2 - V A LV E 4 - O R 5 - P O R T M A N I F O L D
R-134a, R-12
520-CA* (w/Sight Glass)
R-134a, R-12
520-CAM* (w/Sight Glass)
R-134a, R-12
521-CA* (w/Sight Glass)
R-134a, R-12
3-60” w/Service Couplers
521-CAM* (w/Sight Glass)
R-134a, R-12
3-60” w/Service Couplers
R-12, R-22, R-502
520-C* (w/Sight Glass)
R-12, R-22, R-502
520-CB (w/Sight Glass)
R-12, R-22, R-502
521-C* (w/Sight Glass)
R-12, R-22, R-502
3-60”
523-C (w/Sight Glass)
R-12, R-22, R-502
3-36”
R-404A, R-407C, R-134a
560-CB (w/Sight Glass)
R-404A, R-407C, R-134a
R-22, R-407C, R-410A
566-CC †
R-22, R-407C, R-410A
5-36” (B, R, Y 1/4” x 1/4”; B, R 1/4” x 5/16”)
R-404A, R-507, R-134a
525-CKPC † (w/Sight Glass) R-404A, R-507, R-134a
3-36”
R-22, R-134a, R-404A
526-CAC † (w/Sight Glass) R-22, R-134a, R-404A
3-60” w/Service Couplers
580-CKPSC † (w/Sight Glass) R-22, R-134a, R-404A
581-CKPSC † (w/Sight Glass) R-22, R-134a, R-404A
3-60”
·
·
5 1 0 S E R I E S 2 - V A LV E 4 - P O R T M A N I F O L D
R-410A
510-C*
R-410A
510-CM*
R-410A
511-C*
R-410A
511-CM*
R-410A
512-C*
R-410A
513-C*
R-410A
514-CC †
R-410A
515-C*
R-410A
522-C*
R-410A
540-CB
R-410A
570-CKPC † (w/Sight Glass)
R-410A
572-CKPC † (w/Sight Glass)
R-410A
R-410A, R-22, R-407C
582-CKPC † (w/Sight Glass) R-410A, R-22, R-407C
·
* Add “C” suffx for clamshell packaging. † Clamshell packaging only. * *All gauges available with MPa, kPa, Bar, etc.
45
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
3-60”
3-60”
3-60” w/BV
3-36” (5/16” x 5/16”)
3-60” (5/16” x 5/16”)
3-60” (B, R 1/4” x 5/16” w/BV; Y 1/4” x 1/4”)
3-60” (5/16” x 5/16”)
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
5/16” SAE
5/16” SAE
5/16” SAE
1/4” SAE
1/4” SAE
5/16” SAE
5/16” SAE
1/4” SAE
3-36” (1/4” x 5/16”)
MANIFOLDS REFERENCE GUIDES
SERVICE MANIFOLDS REFERENCE GUIDE
PART NO.
REFRIGERANT
PSI
GAUGE CALIBRATION** TEMP
BAR Kg/cm² kPa MPa °F °C
···
···
···
···
··
··
··
··
·
···
···
···
···
··
··
···
···
···
·
···
···
···
4 0 0 & 5 0 0 S E R I E S D E L U X E 2 - V A LV E B R A S S M A N I F O L D
···
···
··
···
··
··
··
··
·
··
··
···
··
CHARGING LINES
···
···
··
R-410A
415-C*
R-410A
416-C*
R-410A
3-36”
417-C*
R-410A
3-60”
417-C-6
R-410A
3-72”
418-C*
R-410A
3-60” w/BV
419-C
R-410A
2-36” w/BV (B, R 1/4” x 5/16”); 1-60” / BV
(Y 1/4” x 1/4”)
454-C
R-410A
3-36” (B, R 1/4” x 5/16”; Y 1/4” x 1/4”)
455-C
R-410A
3-36” w/BV (B, R 1/4” x 5/16”; Y 1/4” x 1/4”)
456-C
R-410A
3-60” (B, R 1/4” x 5/16”; Y 1/4” x 1/4”)
R-410A, R-22, R-404A
420-C*
R-410A, R-22, R-404A
421-C*
R-410A, R-22, R-404A
3-60”
421-CM
R-410A, R-22, R-404A
3-60”(B, R 1/4” x 5/16”; Y 1/4” x 1/4”)
422-C*
R-410A, R-22, R-404A
3-60” w/BV
R-134a
435-CKP*
R-134a
436-CKP*
R-134a
3-36”
439-CA*
R-134a, R-12
3-60” (Y w/BV) & Service Couplers
R-22, R-134a, R-404A
443-C
R-22, R-134a, R-404A
3-60”
R-404A, R-507, 134a
450-C*
R-404A, R-507, R-134a
450-CM
R-404A, R-507, R-134a
451-C*
R-404A, R-507, R-134a
3-36”
451-CM*
R-404A, R-507, R-134a
3-36”
452-C*
R-404A, R-507, R-134a
3-60”
452-C-6
R-404A, R-507, R-134a
3-72”
R-12, R-22, R-502
494-C
Manifold body only
495-C*
R-12, R-22, R-502
495-CB
R-12, R-22, R-502
495-CD*
R-12, R-22, R-502
495-CKP*
R-12, R-22, R-502
496-C*
R-12, R-22, R-502
3-36”
496-CD*
R-12, R-22, R-502
3-36”
496-CKP*
R-12, R-22, R-502
3-36”
498-C*
R-12, R-22, R-502
2-36” (B, R), 1-60” (Y)
500-C*
R-12, R-22, R-502
3-60”
500-CD*
R-12, R-22, R-502
3-60”
500-CD-6
R-12, R-22, R-502
3-72”
505-C*
R-12, R-22, R-502
3-60” w/Low Loss Fittings
R-22, R-134a, R-404A
481-CKPC †
R-22, R-134a, R-404A
482-CKP*
R-22, R-134a, R-404A
3-36”
··
·· ··
·· ·
· ·
··
··
··
· ·
·· ·
· ·
3 0 0 S E R I E S E C O N O M Y 2 - V A LV E B R A S S M A N I F O L D
R-134a
335-CKP*
336-CKP*
R-12, R-22, R-502
395-C*
395-CD*
395-CKP*
396-C*
396-CD*
396-CKP*
397-CD
398-CC †
398-CD
R-22, R-134a, R-404A
398-CKP*
R-134a
R-134a
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-12, R-22, R-502
R-22, R-134a, R-404A
··
··
··
···
··
··
··
·
··
··
·
·
·
MANIFOLD PORT
(BV = Low Loss Ball Valve Shut-Off)CONNECTIONS
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
3-36”
1/4” SAE
1/4” SAE
3-36”
3-36”
3-36”
3-72”
3-60”
3-60”
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
1/4” SAE
MANIFOLD ACCESSORIES & SERVICE PARTS (see pages 47-48 for details)
10SG
Sight Glass Repair Kit
400-RB Set: Red & Blue Protective Gauge Boots
405-RH High Side Repair Kit w/soft touch knob for 300 & 400 Series “Imperial USA” brass manifold
405-RL Low Side Repair Kit w/soft touch knob for 300 & 400 Series “Imperial USA” brass manifold
500-RH High Side Repair Kit for 510 & 511 Series R-410A manifold
500-RL Low Side Repair Kit for 510 & 511 Series R-410A manifold
600-R
Diaphragm Replacement Seal Kit for all 600 Series manifolds
601-R
Replacement VAC & REF Knobs w/stems for all 600 Series manifolds
602-R
Replacement HI & LO Knobs w/stems for all 600 Series manifolds
700-CV Control Valve Repair Kit for 700 Series manifold
800-R
Repair Kit for 800 Series manifold
3-36”
* Add “C” suffx for clamshell packaging. † Clamshell packaging only. * *All gauges available with MPa, kPa, Bar, etc.
46
MANIFOLDS REFERENCE GUIDES
SERVICE MANIFOLDS PARTS ILLUSTRATIONS
800 AND 600 SERIES 4-VALVE MANIFOLD
1
5
6
Knob
Bonnet
Stem
7
8
9
10
11
Brass
Mylar
Teflon Button
Washer Diaphragm Diaphragm Actuator Spring
2
3
4
Knob
Knob
Knob
MANIFOLD REPAIR KITS AND REPLACEMENT PARTS LIST
PART NO.
1234567 891011121314
600-R22222
601-R112
602-R 112
700-CV †1111
800-R * 1111 444444
S6410410
S6410810
S6487010
10
S6902110
S765482
* 800-R repair kit also contains (4) pcs Stainless Steel Washer (Not Shown).
† 700-CV is shipped completely assembled for quick & easy replacement.
700 SERIES KWIK-CHARGER™ MANIFOLD
1
5
6
Knob
Bonnet
Stem
3
Knob
47
7
8
9
10
11
Brass
Mylar
Teflon Button
Washer Diaphragm Diaphragm Actuator Spring
12
13
Bonnet Neoprene
O-Ring
14
4
Stem w/Nylon
Tip and O-Ring
Knob
† 700-CV is shipped completely assembled for quick & easy replacement.
MANIFOLDS REFERENCE GUIDES
SERVICE MANIFOLDS
510 AND 520 SERIES 2-VALVE MANIFOLD
1
12
13
14
15
Knob
Bonnet
Neoprene
O-Ring
Stem w/
Nylon Tip
Neoprene
O-Rings
2
Knob
1
5
6
Knob
Bonnet
Stem
7
8
9
10
11
Brass
Mylar
Teflon
Button
Washer Diaphragm Diaphragm Actuator Spring
MANIFOLD REPAIR KITS AND REPLACEMENT PARTS LIST
PART NO. 1 2 3 4 5 6 7 8 9 1011 12 1314 1516 171819
10SG1
405-RH *11
1
1
405-RL *11
1
1
500-RH *11112
500-RL *11112
600-R2
22
2
2
602-R 112
S6410410
S6410810
S64870
10
10
S69021
10
S765482
* These kits are shipped completely assembled for quick & easy replacement.
10SG 16
2
Knob
10SG 16
2
Knob
400 AND 300 SERIES 2-VALVE BRASS MANIFOLD
3
17
18
19
Knob
Spacer
Gland
Nut
Stem w/Nylon
Tip and O-Rings
4
Knob
48
GAUGES
PRECISION
REFRIGERANT GAUGES
WITH HI-VISIBILITY COLOR-CODED REFRIGERANT SCALES
•Superior Shock Resistance - Our unique design isolates the movement from the
socket, reducing the effects of shock.
•Superior Vibration Resistance - Our enhanced vibration dampening design cushions the
movement for flutter-free performance and extended gauge service life.
•Superior Pulsation Resistance - After 10 million cycles, these gauges show three times less
wear than conventional gauges. The result is a longer lasting, more reliable gauge.
•Replacement Screw-on Lens Set- S8230301
•Protective Red & Blue Rubber Boot Set - 400-RB
Protective rubber boots for gauges sold separately.
PART NO.
DESCRIPTION
R-12, R-134a
441-CB
441-CBM
441-CR
441-CRM
PSI
··
···
·
··
··
··
··
···
·
GAUGE CALIBRATION TEMP
BAR Kg/cm² kPa MPa °F °C
·· ·· ·· ··
·
· ··
·· ·
·
·
·· · ···
· · · ··
·
·
·
··
·· ·
··
·
···
··
Blue Compound
Blue Compound
Red Pressure
Red Pressure
R-12, R-22, R-502
323-CR
Red Pressure
325-CB
Blue Compound
405-CB
Blue Compound
405-CR
Red Pressure
423-CAM
Red Pressure
423-CAPD
Red Pressure
423-CK
Red Pressure
423-CKP
Red Pressure
423-CR
Red Pressure
425-CAM
Blue Compound
425-CAPD
Blue Compound
425-CB
Blue Compound
425-CK
Blue Compound
425-CKP
Blue Compound
431-CM
Red Pressure
432-CM
Blue Compound
R-22, R-404A, R-410A
422-CB
Blue Compound
422-CR
Red Pressure
R-22, R-407C, R-410A
406-CB
Blue Compound
406-CR
Red Pressure
428-CKP
Blue Compound
429-CKP
Red Pressure
49
PART NO.
DESCRIPTION
R-22, R-404A, R-507
426-CKP
Blue Compound
427-CKP
Red Pressure
R-22, R-134a, R-404A
420-BCKP
Blue Compound
420-RCKP
Red Pressure
424-CB
Blue Compound
424-CR
Red Pressure
R-134a
434-BKP
434-RKP
Blue Compound
Red Pressure
R-134a, R-404A, R-407C
407-CB
Blue Compound
407-CR
Red Pressure
PSI
··
···
·
··
··
··
···
·
GAUGE CALIBRATION TEMP
BAR Kg/cm² kPa MPa °F °C
··
··
··
··
··
··
··
··
···
···
··
··
··
·· ·· ··
·
·
·
·· · · ·
· ·
R-134a, R-404A, R-507
451-CB
Blue Compound
451-CBM
Blue Compound
451-CR
Red Pressure
451-CRM
Red Pressure
R-410A
2423-P
2425-CP
408-CB
408-CR
452-CB
452-CR
Red Pressure
Blue Compound
Blue Compound
Red Pressure
Blue Compound
Red Pressure
VACUUM GAUGES
VAK-CHECK
For proper evacuation and dehydration of refrigeration and air-conditioning systems, an electronic vacuum gauge is an indispensable companion to a vacuum pump.
Significant dehydration does not occur until a vacuum of 1000 microns or greater has been achieved. Use of electronic vacuum gauges is the only way to determine when
dehydration is occurring and when it is complete.
Imperial-Thermal Engineering Vak-Checks are precision thermistor vacuum gauges designed especially for refrigeration and air-conditioning service. They automatically
compensate for changes in ambient temperature and permit continuous monitoring during evacuation. These instruments are compact, lightweight, easy to use, and read
directly in microns on a large easy-to-read meter.
VAK-CHECK
4501
Features
•Atmoshere to 10 microns.
• Ambient temperature compensated.
• Accuracy: 200-1000 microns: ±5%.
• Comes complete with Model 4510 Sensor.
• Battery powered, no searching for outlets (2 “D” cell batteries not included).
4501
SUPER VAK-CHECK II
14571
This analog thermistor vacuum gauge allows you to choose between 110AC and battery as
your power source with the same features as the Model 4501.
Features
•AC/battery operated.
• Range: Atmosphere to 10 microns.
• Ambient temperature compensated.
• Complete with Model 4510 Sensor.
• Accuracy: 200-1000 microns ±5%.
• Power: 110AC or 2 “D” cell batteries (Batteries not included).
14571
REPLACEMENT VACUUM SENSORS
4510
Features
•Vacuum Sensor for Vak-Check and Super Vak-Check II.
• Models 4501 and 14571 with 0 to 50 calibration scale.
VAC-SCALE
4510
Saving the service technician time and money, Imperial-Thermal Engineering provides the ability to combine digital hand held vacuum gauge technology with strain gauge
technology for refrigerant charging.
HANDHELD DIGITAL MICRON GAUGE
4775
Imperial-Thermal Engineering is pleased to introduce the 4775 handheld digital micron gauge. Backed by Thermal’s 45
years of vacuum technology the 4775 borrows from the old while incorporating advanced new features including (7)
units of measure, an LCD backlight, LCD contrast control, and a vacuum minimum/maximum function that stores the last
vacuum reading in memory. Lightweight and easy to use, the 4775 will provide the discriminating service technician
with a dependable instrument for accurately measuring vacuum in an air-conditioning or refrigeration system.
Features
•Ergonomic durable case.
• Auto shutoff.
• LCD backlight and contrast.
• Multiple units of measure.
4775
50
HOSES
HI-PERFORMANCE CHARGING HOSE
PolarShield® CHARGING HOSE
950, 900, 850 & 800 SERIES
800 PSI working pressure
4,000 PSI burst pressure
®
•All Imperial® PolarShield® charging hoses are UL recognized and meet
UL-1963, SAE-J2196 & EPA requirements for strength, pressure and refrigerant permeation.
•Rugged, Multi-Refrigerant Nylon Barrier Construction - PolarShield hoses
are compatible with all CFC, HFC & HCFC refrigerants (R-410A, R-404A, R-407C, R-134a).
•High-Pressure - PolarShield hoses feature 800 PSI working pressure and 4,000 PSI
burst pressure with a 5-to-1 safety factor.
•Selection - PolarShield hoses are available with a variety of end connections, in
yellow, red or blue, individually or in sets of three. Consult factory for lengths and
end connections not listed below. (For Automotive R-134a hoses, see page 43.)
Durable neoprene cover
Flexible neoprene backing
Sturdy aramid
fiber reinforcement
Seamless nylon
barrier tube
950 SERIES HOSES WITH LOW LOSS BALL VALVE SHUT-OFF AND
1/4” FFL* CONNECTIONS
LENGTH
BLUE
YELLOW
RED
SET OF THREE (B,Y,R)
3’ (36”)
953-MRB
953-MRY
953-MRR
953-MRS
5’ (60”)
6’ (72”)
955-MRB
956-MRB
955-MRY
956-MRY
955-MRR
956-MRR
955-MRS
956-MRS
*5/16” fittings available-contact factory for part numbers
900 SERIES PolarShield® HOSES WITH AUTOMATIC
SHUT-OFF VALVE
Precision engineered automatic low loss 1/4” FFL* shut-off valve traps refrigerant within the hose
to eliminate venting and finger burn.
900 SERIES HOSES - (1/4” FFL* CONNECTIONS WITH AUTOMATIC SHUT-OFF ON ONE END)
LENGTH
BLUE
YELLOW
RED
SET OF THREE (B,Y,R)
3’ (36”)
903-MRB
903-MRY
903-MRR
903-MRS
5’ (60”)
6’ (72”)
905-MRB
906-MRB
905-MRY
906-MRY
905-MRR
906-MRR
905-MRS
906-MRS
The 950 Series PolarShield®
multi-refrigerant charging
& evacuation hoses feature
low loss ball valve shut-off
and durable hi-pressure
barrier construction.
*5/16” fittings available-contact factory for part numbers
850 SERIES PolarShield® HOSES FOR R-410A SYSTEMS
WITH 5/16” ACCESS FITTINGS (1/4” x 5/16” hose connections)
LENGTH
BLUE
YELLOW
RED
SET OF THREE (B,Y,R)
3’ (36”)
853-MRB
853-MRY
853-MRR
853-MRS
4’ (48”)
5’ (60”)
6’ (72”)
854-MRB
855-MRB
856-MRB
854-MRY
855-MRY
856-MRY
854-MRR
855-MRR
856-MRR
854-MRS
855-MRS
856-MRS
800 SERIES PolarShield® HOSES - WITH STANDARD 1/4” FITTING*
LENGTH
BLUE
YELLOW
RED
SET OF THREE (B,Y,R)
3’ (36”)
803-MRB
803-MRY
803-MRR
803-MRS
804-MRB
805-MRB
806-MRB
808-MRB
812-MRB
804-MRY
805-MRY
806-MRY
808-MRY
812-MRY
804-MRR
805-MRR
806-MRR
808-MRR
812-MRR
804-MRS
805-MRS
806-MRS
808-MRS
812-MRS
4’ (48”)
5’ (60”)
6’ (72”)
8’ (96”)
12’ (144”)
*5/16” fittings available-contact factory for part numbers
51
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
805-MRS
•UL recognized
•800 PSI working pressure,
4,000 PSI burst pressure
•Works with all refrigerant
gases including R-410A
HOSES
HI-PERFORMANCE CHARGING HOSE
3/8” EVACUATION HOSE WITH 3/8” SAE SWIVEL CONNECTION
For faster evacuation and charging
HOSE REPLACEMENT
PARTS
3/8” hose in four lengths for larger jobs or applications where reduced service time is desired. 3/8”
swivel ends. Eight-crimp ferrules. Available in yellow.
LENGTH
YELLOW
536-FTY
548-FTY
560-FTY
572-FTY
3’ (36”)
4’ (48”)
5’ (60”)
6’ (72”)
S7958301 1/4” Hose Seal Gasket.
S7958302 3/8” Hose Seal Gasket.
S8921626 Brass Core Depressor.
S10000265 1/2” ACME & 5/16”
Hose Seal Gasket.
6” LOW LOSS BALL VALVE ADAPTER HOSES
1/4” SAE 45˚ female x 1/4” SAE male straight fittings
Connects to any 1/4” SAE charging line. Non-restrictive for maximum flow.
UL recognized - environmentally safe.
®
LENGTH
BLUE
YELLOW
RED
SET OF THREE (B,Y,R)
6”
800-MBB
800-MBY
800-MBR
800-MBS
200 SERIES HOSE SETS
FOR R-410A
(5/16” x 5/16” hose connections)
800-MBS
200 SERIES HOSE SETS
FOR R-410A
600 SERIES PREMIUM
CHARGING HOSE
B, R - 1/4” x 5/16” hose connections
Y - 1/4” x 1/4” hose connection
(1/4” x 1/4” hose connections)
LENGTH
SET OF THREE (B,Y,R)
LENGTH
SET OF THREE (B,Y,R)
LENGTH
SET OF THREE (B,Y,R)
3’ (36”)
203-MRS
3’ (36”)
213-MRS
5’ (60”)
205-MRS
4’ (48”)
214-MRS
6’ (72”)
206-MRS
5’ (60”)
215-MRS
6’ (72”)
216-MRS
3’ (36”)
5’ (60”)
6’ (72”)
12’ (144”)
603-MRS
605-MRS
606-MRS
612-MRS
800 PSI Working Pressure; 4,000 PSI Burst Pressure
600 PSI Working Pressure; 3,000 PSI Burst Pressure
800 PSI Working Pressure; 4,000 PSI Burst Pressure
HOSE CONVERSION ADAPTERS
The Imperial-Thermal Engineering conversion adapter consists of a compact ball valve that is ideal for retrofitting standard
refrigerant hoses, providing instant refrigerant shut off capabilities. Available in standard 1/4” and 5/16” sizes for R-410A.
PART NO.DESCRIPTION
TE-BV01R
1⁄4 SAE X 1/4 F SAE
TE-BV01Y
1⁄4 SAE X 1/4 F SAE
TE-BV01B
1⁄4 SAE X 1/4 F SAE
TE-BV01-3
1⁄4 SAE X 1/4 F SAE, SET OF 3
TE-BV02R
1⁄4 SAE X 5/16 F SAE
TE-BV02Y
1⁄4 SAE X 5/16 F SAE
TE-BV02B
1⁄4 SAE X 5/16 F SAE
TE-BV02-3
1⁄4 SAE X 5/16 F SAE, SET OF 3
®
Recognized Component. ®
is a registered trademark of Underwriters Laboratories Inc.
52
COUPLERS
KWIK-COUPLER™ ADAPTERS
HOSE SHUT-OFF ADAPTERS ®
The Kwik-Coupler™ adapter set is intended for use with refrigeration and air-conditioning service
17-C
hoses when connecting to core valve type access fittings. Conventional threaded connecting is
converted to push-pull operation which is faster, easier and positive sealing at all times. Valve cores
are depressed automatically without adjustments or loss of refrigerant. Disconnecting is also
accomplished without loss of refrigerant.
An automatic shut-off valve retains refrigerant pressure in a disconnected hose. This feature permits
16-C
transferring high side hose refrigerant through the service manifold into the low side, thereby
eliminating waste and hazardous high pressure discharge and atmospheric damage.
Features
•Automatic full depression of core valves without adjustment, regardless of core position.
•Coupler halves separately connect to access fitting and hose end, then easy push/pull
operation automatically opens or closes system without loss of refrigerant.
• Automatic shut-off of hose ends permits discharging high side hose through manifold
into low side.
CONNECTING
•Eliminates hazardous discharge of refrigerant and oil from system when disconnecting hose.
ILLUSTRATION
•Simplifies operation of charging critical amount of refrigerant into small systems.
•Prevents finger burn when disconnecting - especially servicing heat pumps in cold weather.
•Core depressors in hose ends no longer necessary - speeds servicing of systems with hand valves.
16-C
Straight Coupler (45° Flare) 1/4” female x 1/4” male.
17-C
90˚ Elbow Coupler (45° Flare) 1/4” female x 1/4” male.
Disconnect (Depress)
18-C
(Set) includes 16-C and 17-C.
26-C
Straight Coupler (45° Flare) 5/16” female x 5/16” male.
27-C
90˚ Elbow Coupler (45° Flare) 5/16” female x 5/16” male.
System Access Fitting
26-C and 27-C. NOT UL APPROVED
18-C
Charging Hose
Male Coupler Half
Connect
Female Coupler Half
AUTOMOTIVE KWIK-COUPLER™ ADAPTER FOR R-12
19-C
20-A
(Set) Same as 18-C except with special female coupler for use on 3/16” high side
automotive access valves.
High side adapter. Converts 3/16” system access valve to 1/4” access valve
for use with standard 1/4” charging hose.
WARNING: Do not allow any refrigerant cylinder, connected
for charging, to be exposed to system high side pressure
cylinder - explosion could result!
23-C & 24-C HI-DUTY® SHUT-OFF COUPLERS
•Coupler captures refrigerant within hose, eliminating refrigerant loss, atmospheric
damage and finger burns.
•Connects quickly & easily to any standard 1/4” SAE refrigerant hose.
•Solid brass construction for years of dependable service.
•Innovative modular design permits easy field repairs.
20-A
SHUT-OFF COUPLERS
23-C
53
®
Recognized Component. ®
24-C
is a registered trademark of Underwriters Laboratories Inc.
PART NO.
23-C
24-C
25-K
DESCRIPTION
Straight 1/4” SAE Shut-Off Coupler
90 Degree 1/4” SAE Shut-Off Coupler
Coupler Service Kit
COUPLERS
KWIK-COUPLER™ ADAPTERS
KWIK-COUPLER™ REPAIR KITS
The Kwik-Coupler™ adapter repair kit is intended for use with Imperial® brand 16-C, 17-C, 18-C
and 19-C Kwik-Coupler™ adapters and PolarShield® KC-Series hose. The male repair kit includes a
threaded hex sleeve for replacement on straight coupler assemblies.
Figure 1
Assembly length 7/32”
KCK-M Male Kwik-Coupler™ Adapter Repair Kit - Repairs 2 Male Couplers
Includes:Hex Sleeve (2), Spring (2), Stem Assembly (2) and Sealant
REPAIR INSTRUCTIONS
1.Remove threaded sleeve on end of Kwik-Coupler™ adapter. A vise may be necessary to
remove old straight sleeve - the 90° has a screwdriver slot on back for removal.
2.Discard old stem and spring.
3.Use a wire brush to clean sealant residue from disassembled parts.
4.Insert new stem and spring.
5.Apply one bead of thread sealant completely around the thread. Do not apply an
excessive amount of sealant - this may damage o-ring seal and cause leakage.
Assemble to length at right (Fig. 1 & 2). For 90° style, engage threads until the
bottom of the slot is even with the back of the coupler (Fig. 4).
6.Allow sealant to cure at least 30 minutes. The Kwik-Coupler™ adapter is now ready to use.
Figure 2
Assembly length 7/32”
Figure 3
Hex sleeve
Figure 4
90° assembly
Figure 5
Sealant
KCK-F Female Kwik-Coupler™ Adapter Repair Kit Repairs 5 Standard and 5 Automotive Female Couplers
(Not for 26-C and 27-C)
Figure 6
Spring
Includes:Retainer (2), Gasket (5), O-Ring (10) and O-Ring 3/16” for Automotive (5)
REPAIR INSTRUCTIONS
1.Insert tapered object (pen or pencil) and press against threaded retainer. Unscrew
and remove retainer, sleeve and rubber seals.
2.Lubricate new seals and reassemble. Tighten retainer to zero clearance plus 1/8”
turn. The Kwik-Coupler™ adapter is now ready for use.
Figure 7
Stem assembly
KCK-M Male Kwik-Coupler™ Adapter Repair Kit
KWIK-COUPLER™ ADAPTER REPLACEMENT PARTS
Standard Female Coupler
S8920071 Sleeve
S8920263 (large)
O-ring for 3/16” Coupler
S8920077 (small)
Lubricate O-ring
S8920073
1/4” SAE
Coupler Gasket
Accessory Side Female Coupler
for non-core valve applications
S8920071 Sleeve
S8920072 Retainer
Tapered Object
S8920077 (small)
Lubricate O-ring
S8920073 Gasket
PART NO.
S8920072 Retainer
S8920069
S8920071
S8920072
S8920073
S8920074
S8920077
S8920082
S8920261
S8920263
S5951125
KCK-F
KCK-M
DESCRIPTION
Male Coupler 1/4”-Straight
Female Coupler 1/4” & 3/16”-Sleeve
Female Coupler 1/4” & 3/16”-Retainer
Female Coupler 1/4”-Gasket
Female Coupler 1/4”-Low Side
Female Coupler 1/4”, 3/16” & 5/16”-O-Ring
Male Coupler 1/4”-90°
Female Coupler 3/16”-High Side
Female Coupler 3/16” -O-Ring
Female Coupler 1/4” -for Non-Core Valve
Application
Repair Kit For All Female Couplers
Repair Kit For All Male Couplers
USED ON
16-C, 17-C, 18-C, 19-C
16-C, 17-C, 18-C, 19-C
16-C, 17-C, 18-C, 19-C
16-C, 17-C, 18-C, 19-C
16-C, 17-C, 18-C, 19-C
16-C, 17-C, 18-C, 19-C
16-C, 17-C, 18-C, 19-C
19-C
19-C
16-C, 17-C, 18-C, 19-C
Indentification Groove
S8920261 Female Coupler
(3/16” high side automotive)
S8920074 1/4”
Female Coupler
S5951125 Female
Coupler (accessory side)
54
ACCESSORIES & TOOLS
REFRIGERANT CHARGING & RECOVERY
KWIK-VISE™
Refrigerant Recovery Tool
PT-109
Line piercing/refrigerant recovery tool pierces, seals and locks on to copper lines
in one swift motion.
Self-adjusting! No need to adjust the tool for different sizes of tubing. The tension
system automatically locks pliers on copper tubing 1/4” to 1/2” (6 mm-12 mm) O.D.
To use, simply position the PT-109 on the tubing to be pierced. Close the pliers
quickly and firmly. The pliers will automatically adjust and lock into a tightly sealed,
secure position.
Features
• Replaceable hardened, stainless steel pierce and brass valve assembly (S16002045).
• Capacity: 1/4” thru 1/2” O.D. refrigerant copper tubing.
• Durable: made with high-carbon, heat treated steel jaws.
• Works with all refrigerants CFC, HFC, HCFC and Zeotropic, Azeotropic.
• 90˚ elbow valve eliminates tangling and interference problems.
S16002045
Replacement pierce and brass valve assembly.
PT-109
KWIK CHARGE®
Liquid Low Side Charger
Provides fast, safe charge - essential for today’s blended refrigerants!
The Kwik Charge® charging unit accepts liquid refrigerant from the cylinder and discharges into low side
of the system. Charging rate is up to eight times faster than vapor charging. In addition, liquid charging
is required when using R-410A and other blended refrigerants. Attach the Kwik Charge device to the
low side of the charging manifold. Charging hose is connected from Kwik Charge device outlet to low
side of refrigeration system. Internal metering element reduces liquid flow to a level below capacity of
compressor. This assures a safe, fast charge without endangering the compressor. A built-in ball check
valve automatically opens when drawing a vacuum to assure rapid, unrestricted evacuation. Can be used
with all fluorinated hydrocarbon refrigerant systems.
Features
• Up to 8 times faster than vapor charging.
• No need to heat refrigerant cylinder.
• Built-in check valve opens for drawing unrestricted vacuum.
• No pressure drop in cylinder.
• One charger services all units 1/2 ton or larger.
535-C
Kwik Charge® charging unit 1/4” female SAE flare inlet, 1/4” male SAE flare outlet.
545-C
55
Kwik Charge® charging unit 5/16” female SAE flare inlet, 5/16” male SAE flare outlet.
535-C
CONNECTION TO MANIFOLDS
(connect all hoses as usual)
2-Valve Connect Kwik Charge®
charger to low side fitting.
Arrow downward.
Can be connected to refrigerant
cylinder rather than manifold.
4-Valve Unscrew end fitting &
reverse, then connect to
refrigerant fitting as shown
(flow arrow on body points
upward).
ACCESSORIES & TOOLS
REFRIGERANT CHARGING & RECOVERY
VIZI-VAPR CHARGER
7701
Many problems can arise from improper charging of any type of refrigeration system.
Vizi-Vapr makes it possible to correctly charge a system every time. Liquid refrigerant
being charged is transformed into a saturated vapor through a small orifice which
thereafter can be viewed to ensure the system gets charged properly.
The Vizi-Vapr eliminates the problem of slow vapor charging by removing the
refrigerant from the cylinder as a liquid and injecting it into the system as a saturated
vapor. Since the liquid refrigerant is removed from the cylinder by its own pressure, no
heat is removed from it and the cylinder does not get cold. Refrigerant blends must be
removed from their containers as liquid. Using the Vizi-Vapr, the blend can be charged
into the system as a saturated vapor without any composition change. Vizi-Vapr is
adjustable from 1/8hp up to 50hp. The operation is completely visible so there is little
danger of liquid entering the system.
7701
VIZI-VAPR REPAIR KIT
7701RK
Complete set of gaskets, “O” rings, and back-up rings required for repairing the 7701 Vizi-Vapr.
PROCESS TUBE ADAPTER FOR CHARGING & TESTING
Offers a convenient method of making a service connection to a hermetic unit. Also ideal for providing a
connection in testing coils and tubing installations. Handles pressure to 100 PSI. To connect to a hermetic system,
pinch-off tube is cut off and adapter is slipped over cut end of tube and tightened. Synthetic rubber seal of
adapter grips and seals outside of tube. This gives a 1/4” SAE male flare connection to the system for evacuating,
charging or testing. After system is recharged, tube is pinched off next to adapter. Adapter is then removed and
tube is cut off and sealed with solder. Adapter can be reused repeatedly.
Pinch-off tube on hermetic
compressor is cut off and
PART NO.
TUBE O.D. (in.)
SAE FLARE END (in.)
241-F is placed on tube.
241-F-033/16
1/4
Charging line is connected
241-F-041/4
1/4
to flare end of 241-F.
241-F-03
PIERCING VALVES
3-IN-1 PIERCING VALVE
Fast, easy, secure installation. Provides access to line at any point for charging, testing or
evacuation. Two valves cover 3/16” to 5/8” O.D. tubing. Has depressor valve and needle
valve shut-off.
Valve clamps on tubing line with two captive slotted-head screws: positive built-in mechanical
stop for each tube size eliminates tightening guesswork. To pierce tube, thread down the
combination l/4” flare port, stem and needle using knob furnished or a suitable wrench, back off
stem and connect depressor-type hose for testing or charging. After service is completed valve
is closed and left on line for future service. Dust cap provided.
Three-point sealing [in Fig. 1: (1) needle-type valve, (2) gasket and (3) check valve] prevents
leakage. Neoprene seal withstands temperatures near 300°F.
FITS THREE SIZES
541-C
Fits 3/16”, 1/4” and 5/16” O.D. tubing.
542-C
Fits 3/8”, 1/2” and 5/8” O.D. tubing.
3/16”
Fig. 1
541-C
1/4”
5/16”
56
ACCESSORIES & TOOLS
ACCESS VALVES & ADAPTERS
ACCESS FITTINGS/SWIVEL ADAPTERS
9-C
10-C
Straight adapter, 1/8” female pipe by 1/4” SAE female swivel connection.
90° swivel adapter,1/4” SAE male flare by 1/4” SAE female flare swivel connection
with core depressor.
9-C
10-C
ACCESS VALVES
These valves are designed to facilitate charging and testing of refrigeration systems.
Furnished with flare cap on valve end.
Half Union Access Valves
PART NO.
TUBE
O.D.
PIPE
THREAD
(in.)(in.)
Replacement Valve
Cores
PART NO.
Flare Caps
Wrench Caps
PART NO.
G6400
FOR FLARE
PART NO.
SIZE
640-FC-041/4”
640-FC-063/8”
G6600
GU1-4A1/4 1/8
GU1-4B1/4 1/4
VALVE CORE DEPRESSOR
For 1/4” male flares.
7025
PART NO.
7025
DESCRIPTION
FOR 1/4” MALE FLARES
R-410A BRASS ADAPTER
Convert new R-410A system ports with 5/16” SAE connections to 1/4” SAE.
PART NO. MALE FEMALE
TE-BA01
1/4” SAE
5/16” SAE
OTHER
W/ CORE AND DEPRESSOR
APPLICATION
R-410A INTERNATIONAL
TE-BA01
R-410A 45° BRASS ADAPTER
Convert new R-410A system ports with 5/16” SAE connections to 1/4” SAE at 45°.
PART NO. MALE FEMALE
TE-BA0145
1/4” SAE
5/16” SAE
OTHER
W/ CORE AND DEPRESSOR
APPLICATION
R-410A INTERNATIONAL
TE-BA0145
ADDITIONAL END FITTING OPTIONS
Imperial-Thermal Engineering understands that no two jobs are alike. In keeping with our commitment to serve the HVAC/R professional
we offer a multitude of end fitting options custom tailored for your application. Listed below is a sample of the end fittings available in any
combination. Please call customer service for your inquiries, (888) 467-8665.
1⁄4 Anti-blow back
1⁄2 Acme FFL 90°
1⁄4 FFL 90°
1⁄4 Hex Nut
1⁄2 Acme Anti-blow back
1⁄2 Acme 14mm
1⁄2 Acme Hex Nut
1⁄4 Hex Nut 45°
1⁄2 Acme FFL
1⁄4 FFL
1⁄2 Acme Hex Nut 45°
1⁄4 Hex Nut 90°
1⁄2 Acme FFL 45°
1⁄4 FFL 45°
1⁄2 Acme Hex Nut 90°
In-line filter element (10 microns)
57
ACCESSORIES & TOOLS
CAP-CHECK
The Cap-Check is a Imperial-Thermal Engineering innovation that has made cap tube cleaning possible and practical. It is designed to
pump a high rate of oil into the cap tube to build up pressures needed to open any plugged cap tube, and will clean partially plugged cap
tubes when used with the Imperial-Thermal Engineering Chaser Kit.
CAP-CHECK
1003
Cap-Check is a portable, self contained hydraulic power unit with auxiliary equipment especially adapted to
cleaning refrigeration capillary tubes. A 0-5000 PSI gauge shows pressure build-up if cap tube is restricted
and also shows when chaser has passed through the tube. A trigger operated gauge shutoff is provided so
the gauge will not be damaged if pressures greater than 5000 PSI are desired. A 30” high pressure hydraulic
hose with a 1/4” SAE male flare outlet connects the cap tube to the Cap-Check for simple handling. An
adapter is supplied to connect the cap tube directly to the hose outlet without a flared fitting.
1003
CAP-CHECK CHASER KIT
1101
Chaser Kit is the only means available to clean partially plugged cap tubes. It must be used with the
Imperial-Thermal Engineering Cap-Check since no other cap tube cleaning tool provides a rate of oil flow
large enough to remove partial restrictions even from the smallest cap tubes. The Chaser Kit consists of 10
spools of lead alloy wire which can be used as a chaser for the 10 most popular sizes of cap tubes (.028,
.031, .036, .039, .042, .046, .050, .055, .064, .070). In addition to the wire, a cap tube gauge, a set of sizing
tools, and a combination file/reamer are all included in a durable metal case.
1101
CAP-CHECK OUTFIT
5101
Cap-Check Outfit includes both the Cap-Check and Chaser Kit in one compact case along with an extended
base that holds the Cap-Check. The Cap-Check can be operated with one hand, allowing high pressures to
be easily pumped. Carrying case has clips to hold Cap-Check, Chaser Kit, hose, handle, and extended base.
5101
CAP-CHECK ACCESSORIES
A capillary tube is the most likely place a blockage in a system can occur and can cause a system to operate very inefficiently. Therefore it is
essential to have the proper tools on hand to fix this very common problem. Below are accessories that we recommend for the Cap-Check
and your service arsenal.
PART NO.
NAME
DESCRIPTION
1003RK
Cap-Check Repair Kit
Complete set of gaskets, “O” rings, springs and balls for Part No. 1003 Cap-Check, with instructions
1011
0-5000 PSI Gauge
High pressure gauge for Part No. 1003 Cap-Check with a pressure range from 0-5000 PSI
101230” Hydraulic Hose Replacement
30” high pressure hydraulic hose with a 1/4” SAE male flare outlet
1102
Cap-Gauge
Pocket knife type cap tube gauge with 10 stainless steel gauges to measure the most popular sizes of cap tubes
(.028”, .031”, .036”, .039”, .042”, .046”, .050”, .055”, .064” .070”)
1201
Carrying Case
Heavy duty case provides maximum protection from wear and tear when not in use
1301
Extended Base
Extension for the base of the Cap-Check providing better accessiblity in certain situations
CAPILLARY TUBING
Imperial-Thermal Engineering quality capillary tubing - available in 100ft. coils.
PART NO.
CT-31-100
CT-36-100
CT-42-100
CT-49-100
CT-54-100
CT-59-100
CT-64-100
CT-70-100
SIZE
.031” ID X 100 FT
.036” ID X 100 FT
.042” ID X 100 FT
.049” ID X 100 FT
.054” ID X 100 FT
.059” ID X 100 FT
.064” ID X 100 FT
.070” ID X 100 FT
58
ACCESSORIES & TOOLS
CALCULATORS
Reference points on a variety of topics and scales to make even the most technically demanding jobs a breeze.
ROOM AIR CONDITIONER CALCULATOR
5100
Used to determine size of air conditioner unit with allowances for:
• Exposed and unexposed walls.
• Exposed and unexposed windows.
• Roof and ceiling insulation.
• Heat gain from number of people.
• Location.
This calculator selects amount of capacity needed in a cooling load of 5000-24000 BTUs per hour, and
indicates the size of unit required in BTU ratings. The calculator not only simplifies the job of specifying
window air conditioners, but also eliminates misapplication and paper work. An ideal service and sales
tool for the estimator and service engineer, the calculator is imprinted with full directions.
5100
AIR DUCT CALCULATOR
5125
This ingenious, pocket-size Air Duct Calculator uses only three slides to give all of the information needed
when figuring the sizes of air ducts. Convenient tables printed on the back of the calculator supply
additional data in a handy, easy-to-use form. The few words of instruction needed to understand and use
the different slides are printed on the calculator face, where they cannot be lost or mislaid.
Used to determine:
• Size of air ducts by the equal pressure loss method.
• Size of round ducts vs. rectangular ducts.
• Weight per foot of round ducts by U.S.S. gauge.
• Weight per foot of rectangular ducts by U.S.S. gauge.
• Recommended duct velocities.
• Friction loss of 1-1/2 radius elbows.
• Gauge of metal for size of ducts.
5125
HUMIDITY CALCULATOR
5150
Designed for determining the percent of relative humidity when using any standard sling psychrometer,
this calculator eliminates the use of psychrometric charts from 60° to 100°F. The reverse side of the
calculator has a chart of recommended humidities according to industry application and temperature.
5150
TROUBLESHOOTING CALCULATOR
5175
This calculator simplifies the job of diagnosing cooling system troubles. Ideally suited to the needs of the
expert as well as the needs of the trainee, it provides immediate reference, from COMPLAINT to POSSIBLE
CAUSE to REPAIR.
Features
• 19 major ‘Complaint’ sections.
• 32-part ‘Trouble Shooting’ Index.
• 127 ‘Possible Cause’ items.
• All items keyed to ‘Repair’ window.
5175
59
ACCESSORIES & TOOLS
CALCULATORS
On-the-fly calculations can be made very easily to help troubleshoot a system, saving you valuable time!
CAPILLARY TUBE AND TROUBLESHOOTING CALCULATOR
5180
TWO SLIDE CHARTS IN ONE
This is a dual-purpose slide chart. One side is a new, scientific approach for selecting readily available
standard capillary tubing sizes to replace the hard-to-get sizes that original manufacturers often
recommend. The other side is a troubleshooting calculator that simplifies the job of diagnosing cooling
system trouble where the capillary tube is suspect.
5180
REFRIGERATION CALCULATOR
5300
A time-saving and easy-to-use calculator to supply technical refrigeration data:
• Hermetic terminal colors.
• Thermostatic control settings.
• Pressure control settings.
• Head and back pressures.
• Hermetic motor diagrams.
• Temperature pressure chart.
The calculator graphically shows vital refrigeration data and provides service information not available in
any other form.
5300
BOOKS
REVIEW OF VACUUM FOR SERVICE ENGINEERS
5225
The story of how vacuum is used as a tool to dehydrate and degas a refrigeration system.
This text is the only publication that clearly and non-technically explains vacuum
fundamentals for the service man or engineer.
Illustrated with charts, photographs, and diagrams, this authoritative handbook describes
and explores vacuum terms, properties, uses, activities, advantages, limitations, and
techniques.
Features
“The Hard Way”
• Covers key service-related topics.
...to learn about vacuums.
• Vital for processing engineer, serviceman.
• What vacuum means.
• How a pump works.
• Sizing high vacuum pumps and lines.
• Vacuum gauges procedure for dehydration, degassing,
leak detection.
5225
“The Easy Way”
Take “The Easy Way” with
“Review of Vacuum for Service Engineers”
by
Saunders & Williams
60
ACCESSORIES & TOOLS
SQUARE HEAD BOLT SOCKET ADAPTER
THE SQUARE WONDER™ SQUARE HEAD BOLT SOCKET ADAPTER
T-516
This incredible tool fits into 1/2” hex sockets and enables the technician to easily remove 5/16”
square head locking bolts. It allows easy access to places where valve wrenches will not work
or when more leverage is required.
COMMON APPLICATIONS INCLUDE:
•Refrigeration & A/C service valves.
•Condenser fan blades with bottom side and right side up hubs.
•Small and large concave blower wheels.
•Beam clamps for hanging all-thread rods
(used in electrical, plumbing and A/C applications).
•Square head lag screws.
•Pipe plugs, pump heads for gauge ports, water and pneumatic plugs,
gas furnace manifold plugs.
•Adjustment screws for pressure switches.
•Great for Carrier, York, Addison, Rheem, Aaon, Bard, Trane and many more.
T-516
HEATERS
Quick and easy process of pressurizing a refrigerant supply cylinder to move any refrigerant to another vessel.
CYLINDER HEATER
3054
A quick, convenient, easy-to-use means to pressurize refrigerant supply cylinders to
move any refrigerant to another vessel or charging dispenser, the 3054 Cylinder Heater is
designed to fit 30Ib. and 50Ib. containers. It also can be used on 125Ib. cylinders and fits
the refrigerant cylinders in many recovery units. The device consists of a 6” x 28” flexible
silicone rubber heating element with extra-Iong Velcro straps, built-in molded thermostat,
and power cord. The heater draws 200 watts at 120 VAC and has a 135° preset thermostat.
3054-230V
230 Volt model available for European market.
61
3054
CHARGING SCALES
CHARGING SCALES
CHARGING SCALE
4900
The 4900 refrigerant charge scale is the ideal choice for field service work. With a high resolution LCD screen that reads in
both lbs. and kg., this scale comes packaged in a convenient carrying case and is powered by (1) 9 volt battery (included).
Features
•Battery operated (9V) for ease of portability.
•220lbs. (100kg.) capacity.
•High resolution LCD screen with backlight capability.
•Automatically powers off.
•5g, 0.25oz. resolution.
•Readout in lbs. or kg.
Convenient solution for
•Zero/Tare capable.
refrigerant charging.
•Weight 6.5lbs.
Easy to use, even easier
•Extra sturdy aluminum bound case.
to carry around.
4900
OIL PUMPS & ACCESSORIES
OIL PUMPS & ADAPTERS KITS
Precisely and exactly the right amount of oil in the cleanest and most efficient manner. Allow for all popular
sizes of oil cans and bottles to fit with our oil pumps.
CHARGE-OIL PUMP
It charges without pumping the compressor down thus reducing charging time by over 70%. Also avoids the
embarrassment of spilling oil on the customer’s premises. Provides the professional touch since oil can be accurately
measured into the compressor without having to pour it from the can. Fits all popular brands of refrigeration oil.
Complete Adapter Kit supplied to accommodate most containers. The Charge-Oil Pump cap seals the can so pump
need not be removed until can is empty. Thermal Charge-Oil Pump is a piston type high pressure pump designed
to operate at pressures to 250 PSI. It pumps one quart in 20 full strokes of the piston. Pump is connected to
compressor by refrigerant charging line or copper tubing from 1/4” male fitting.
Suitable for use with alkybenzene and POE oils.
PART NO.
1702
1703
DESCRIPTION
Imperial-Thermal Charge-Oil Pump
Imperial-Thermal Charge-Oil Pump for 5 Gallon Can
1702, 1703, 1751
CHANGE-OIL PUMP
1751
1751 Change-Oil Pump is a companion to the famous Imperial-Thermal Engineering 1700 Charge-Oil Pump. It has been designed for use
in pumping oil from refrigeration compressors, marine engines, and other equipment where it is impossible to drain oil in the conventional
manner. Removing oil from refrigeration compressors before dehydrating with vacuum is a necessity. Suction tube is 5/16” OD semi-rigid plastic,
15” long. Suction tubes up to 60” long can be used if necessary. Will not pump under pressure. Pumping capacity about 10 strokes per quart.
ADAPTERS & REPAIR KITS
PART NO.
NAME
DESCRIPTION
1705
1702 & 1703 Repair Kit
Complete set of gaskets, bearings, rings, springs and washers for the repair of Imperial-Thermal oil pumps
1751RK
1751 Repair Kit
Complete set of gaskets, bearings, rings, springs and washers for the repair of Imperial-Thermal oil pumps
1768
Adapter Kit
Adapter kit for all popular cans and bottles of refrigerant oil. Kit contains 5 rings and one spacer to
accommodate most oil containers
1770
Adapter Kit
Suction adapter for aluminum Charge-Oil Pump. Converts part no. 1702 Charge-Oil Pump into suction pump for
refrigeration, marine and other similar applications where it is impossible to draw oil in the normal manner
62
VACUUM PUMP ACCESSORIES
VACUUM PUMP ACCESSORIES
These vacuum accessories will help you make easy vacuum connections in many types of systems.
MINI-VAC
1833
1833
Mini-Vac is a compact High Vacuum Manifold which provides a 3/8” flare yoke and
an electronic vacuum gauge sensor port (sensor not included). Features a 3/8” packless
diaphragm valve to isolate the vacuum pump from the system. The Mini-Vac mounts
on the pump with a 3/8” quick coupler.
Pictured with optional digital vacuum gauge.
MANIFOLD GASKET SET
1843
Gasket set for Part No. 1833 Mini-Vac.
MINI-VAC MANIFOLD AND 0-30” VACUUM GAUGE COMBO
1834
Combination of Part No. 1833 Mini-Vac Manifold and 0-30” mechanical vacuum gauge
which attaches to the sensor port.
1834
VACUUM TEE
1832
Vacuum Tee for evacuating from two ports with one vacuum source. (2) 3/8” MFL x 3/8”
quick coupler. Includes (2) 3/8” x 1/4” x 6’ (72”) high vacuum hoses.
1832
3/8” EVACUATION HOSE WITH 3/8” SAE SWIVEL CONNECTION
For faster evacuation and charging
3/8” hose in four lengths for larger jobs or applications where reduced service time is desired. 3/8”
swivel ends. Eight-crimp ferrules. Available in yellow.
63
LENGTH
YELLOW
536-FTY
548-FTY
560-FTY
572-FTY
3’ (36”)
4’ (48”)
5’ (60”)
6’ (72”)
VACUUM PUMP ACCESSORIES
VACUUM PUMP ACCESSORIES
High quality vacuum pump oil and sealants help maintain your vacuum pumps and prolong their life.
VACUUM PUMP OIL
1813
Imperial-Thermal Engineering Vacuum Pump Oil keeps any high vacuum pump at
maximum performance. No pump can deliver a lower pressure than its sealing oil’s vapor
pressure. This oil must have the viscosity to lubricate and seal clearances in the pump’s
moving parts at the extreme temperatures developed during continuous use.
•Premium quality mineral oil formulated to tolerate exposure to vacuums of 5 microns.
•Resists the formation of deposits and maintains its original lubricating properties over a long life.
•Offers very high vacuums, excellent lubrication, and long oil life.
•Available in 1qt. bottles, 6 per case.
PART NO.
CASE SIZE
GRAVITY,
VISCOSITY
FLASH PRESSURE,
API POINT
MICRONS,
HG, MAX
1813 (6) Quart Containers
29.2
SUS AT 100°F, 335
450°F
5
LIQUI-VAC
4036 & 4036-Q
Features
•Sets up quickly.
•Seals to 1 micron.
•Remains flexible.
•Ready to use.
A real time-saver in servicing cooling systems, Liqui-Vac is the only liquid sealant with
the capacity of sealing high vacuum connections. It will positively seal high vacuum leaks
around threads, through flared connections, face joints, wherever metal joins metal. LiquiVac sets up quickly, but remains flexible for easy disconnection. Liqui-Vac is resistant to
most solvents, can seal to 1 micron, and withstands temperatures from -100°F to +325°F.
4036
4036-Q
4 oz. brush-in-cap can (Sold 12 per case)
1 qt. can
EASY BRUSH ON APPLICATOR FOR:
THREAD CONNECTIONS
SOLDERED OR WELDED CONNECTIONS
MACHINE SURFACE CONNECTIONS
64
CHARGING CYLINDERS & ACC.
CHARG-CHECK
Accurately charge your refrigeration system with Charg-Check, available in a number of sizes to suit your needs.
CHARG-CHECK
Features
• Comes in three sizes to suit any application, 1lb. (16oz.), 5Ib. (80oz.), and 10lb. (160oz.) sizes cover the field from light domestic to heavy commercial.
• Allows you to measure out precise quantities of refrigerant.
• Helps speed up the charging process by letting you charge with heat. All cylinders except the 16oz. model will hold a Model 7020 Heater Assembly (See page 68).
• Allows you to carry small quantities of refrigerant to the job, yet buy refrigerant in large quantities and keep the drum back at your shop.
• Is available in a steel carrying case to completely protect them from tough use. Cylinder need not be removed from the case as all connections and valves are accessible from front. Case forms a stand to set on the floor or bench. Case sold separately (See page 68).
• Easily used in the field. They hang onto system being charged by means of a top-
mounted bail.
• Can be calibrated for ambient temperature variations by means of temperature correction chart on the side of the scale. This is required only if better than 2% accuracy is needed.
• Safety relief valve for protection.
• Plastic liquid level indicators.
R-12, R-22, R-502 MODELS
PART NO.
HFC-134A MODELS WITH 1/4” SAE FITTINGS
CAPACITY
GRADUATION
7001
16 oz.
1/2 oz.
7002*
16 oz.
1/2 oz.
7005
80 oz.
7006*
80 oz.
7009
7010
CAPACITY
GRADUATION
U7001
16 oz. (450 G)
1/8 oz. (5 G)
U7002*
16 oz. (450 G)
1/8 oz. (5 G)
1 oz.
U7005
80 oz. (450 G)
1 oz. (25 G)
1 oz.
U7006*
80 oz. (450 G)
1 oz. (25 G)
160 oz.
2 oz.
U7009
160 oz. (900 G)
2 oz. (50 G)
160 oz.
2 oz.
U7010
160 oz. (900 G)
2 oz. (50 G)
*CARRYING CASE INCLUDED
GASKET SETS AND REPAIR KITS
Charg-Check Repair kits contain a complete gasket set and replacement gauge.
65
Shown with optional carrying case
PART NO. DESCRIPTION
7001GS
Gasket set for 16 oz. CHARG-CHECK
7001RK
Repair kit for 16 oz. CHARG-CHECK
7003GS
Gasket set for 2-1/2 lb. CHARG-CHECK
7003RK
Repair kit for 2-1/2 lb. CHARG-CHECK
7005GS
Gasket set for 5 lb. CHARG-CHECK
7005RK
Repair kit for 5 lb. CHARG-CHECK
7009GS
Gasket set for 10 lb. CHARG-CHECK
7009RK
Repair kit for 10 lb. CHARG-CHECK
PART NO.
*CARRYING CASE INCLUDED
CHARGING CYLINDERS & ACC.
CHARG-CHECK ACCESSORIES
Optional accessories for the Charg-Check Series charging cylinders
CARRYING CASES FOR THE CHARG-CHECK SERIES
An ideal way to protect the Charg-Check cylinder from various damage including a broken
sight glass. The carrying cases are constructed of 20 gauge steel and supplied with a
durable powder coat finish.
PART NO.
DIMENSIONS
USED WITH
7007
4.25”W x 16.75”H x 3.625”D
7001 / U7001
7008
4.75”W x 23.5”H x 5”D
7005 / U7005
7013
6”W x 25”H x 7”D
7009 / U7009
Shown with optional carrying case
CHARG-CHECK HEATER ASSEMBLIES
7020 & 7024
7020
The 120 Volt heater assembly is threaded into the bottom of the cylinder to increase the speed of the charge.
7024
The 240 Volt heater assembly is threaded into the bottom of the cylinder to increase the speed of the charge.
7024, 7020
66
COMPRESSOR TOOLS
HERMETI-CHECK
Hermetic compressors are permanently sealed which means there is little you can do to fix one that is broken on
the inside. However with the following tools brought to you by Imperial-Thermal Engineering, you can test the
compressor for any electrical problems it may have which can help determine the appropriate actions to take.
HERMETI-CHECK
2001
Hermeti-Check tests all single phase compressors up to 5 HP, 110, 220 or 277 volts.
Features
•Tied-up compressors may be freed by reversing motor rotations.
•Tests windings for opens, continuity, and grounds.
•Tests start and run capacitors and system relays by substitution.
•Measures running amps, 0-10, 50A range.
•Measures start and run volts, 0-150, 600V AC ranges.
•Compressors are tested in the manner in which they were designed to operate: split-phase, capacitor start, or PSC.
•Has provisions for connecting external run capacitor. (1) 30A breaker protected to allow high starting current with adequate overload protection.
•Complete with 220V adapter cord and capacitor leads.
WEIGHT
3 LBS
POWER
110, 220, OR 277 VAC 50/60 HZ
DIMENSIONS
12-1/8” x 8” x 3-3/8”
PROFESSIONAL SERIES DIGITAL HERMETIC ANALYZER
12501A
Features
•Easy to read digital LCD display.
•Tests and runs 110, 220 or 277 volt 50/60 Hz single phase compressors up to 5 HP.
•Tied-up compressors may be freed by reversing motor rotation.
•Tests windings for opens, continuity, and grounds.
•Checks capacitors for leaks, opens, and shorts.
•Measures capacitor values, 0-200, 0-2000 MFD ranges.
•Automatic capacitor discharge.
•Measures compressor amps, 0-30A.
•Measures start and run volts, 0-600VAC.
•Measures winding resistance, 0-2000 ohm.
•500V megger for testing compressor windings for grounds.
•Compressors are tested in the manner in which they were designed to operate:
split-phase, capacitor start, or PSC.
•Multiple internal starting capacitors: 100, 200 and 400 MFD values.
•Has provisions for connecting external run capacitor.
•30A breaker protected.
•Complete with 220V adapter leads and capacitor leads.
Upgraded Features
•Combined run and start information onto single screen.
•Each screen describes what it is measuring.
•New safety features prevent switching from high voltage to low voltage measurement until charge has dissipated.
•Compressor cannot be started unless selector switch is in a run mode.
WEIGHT
67
9.5 LBS
POWER
110, 220, OR 277 VAC 50/60 HZ
2001
DIMENSIONS
15-1/2” x 13-3/8” x 6”
Remember
the
Back by
Popular Demand
12501A
COMPRESSOR TOOLS
ACCESSORIES
A compressor may just have a bad electrical part. These accessories will help determine exactly what is going on.
QUIK-START
2601
Quik-Start starts all single phase compressors up to 5 HP 110, 200, 277V AC. A troubleshooting aid for determining whether fault lies with compressor or component parts.
Fusetron protects against shorts and overloads, but allows high starting load. Capacitor
leads provide means of starting split phase, capacitor start, or permanent split capacitor
compressors.
2601
TEST LEAD KIT
2605
Test Lead Kit consists of 4 leads 30” long with insulated test clips in each end for
temporarily connecting relays, capacitors, etc., into a system for test purposes and has
a 6ft. heavy duty power cord with a male pIug on one end and insulated test clips on
the other. Also has a 12” power cord with a female socket on one end and insulated clips
on the other.
2605
QUIK-START + TEST LEAD KIT COMBO
2602
Combination of Model 2601 Quik-Start and Model 2605 Test Lead Kit.
ADAPTER CORD
2136
Provides a 12” 3-wire grounded power cord with standard female plug on one end and
insulated clips on the other end. This cord is supplied as standard equipment with Models
2001, 2605, and 12501A.
COMPRESSOR TERMINAL REPAIR KIT
GL-1000
The GL-1000 Gator-Lok is designed to repair burnt terminals on compressors up to 5 tons.
Gator-Lok’s unique design makes installation a snap and requires no special tools.
Gator-Lok is made from high quality materials. Once installed properly, it provides multiple
points of contact on the burnt terminal.
Gator-Lok can be easily installed in minutes, therefore giving the technician the ability to
restore power to the unit, and eliminates the need to replace the compressor.
Each Gator-Lok Kit includes a set of three Gator-Loks (1 red, 1 blue and 1 black 10 gauge
wire with 30” leads).
GL-1000
68
LEAK DETECTION
LEAK DETECTION
REFRIGERANT LEAK DETECTOR
HLD-1201
Building on their successful line of leak detection products, Imperial-Thermal Engineering
introduces the HLD-1201 refrigerant leak detector. This durable hand held detector has
increased sensitivity of up to 3 grams/0.105 ounces per year and a pump for faster response
time. Utilizing newly developed semi-conductor gas sensing technology, the HLD-1201 is
ideal for diagnosing leaks on air-conditioning and cooling systems utilizing a wide variety
of common refrigerants.
Features
• Heated semiconductor gas sensor.
• High low leak sensitivity selector, 3 levels of sensitivity.
• Bright LED display.
• Ambient concentration reset.
• Includes durable carrying case and reference source.
• Optional DC adapter 3.3V 0.5A.
Specifications
• Alarm method: Buzzer, Tri-color LED Bar Indicator.
• Power usage: (4) AAA size (6V DC) Alkaline batteries.
• Snake tube length: 15.5” (40cm).
• Dimensions / Weight: 173mm x 66mm x 56mm (400 grams)
6.8” x 2.6” x 2.2” (14.1 oz).
• Accessories: Aklaline batteries (4 pieces), user manual, leak check bottle, carrying case.
• Battery Life: 7 hours normal usage.
• Auto Power off: 10 minutes.
• Disable Auto Power off: Press and hold (HI) button then power on the meter.
HLD-1201
SENSITIVITY
LEAK DETECTION SENSITIVITY
HI MEDIUM
0.105 OZ (3G) /YEAR 0.529 OZ (15G) /YEAR
1.05 OZ (30G) /YEAR
R-404A, R-407C, R-410A
0.141 OZ (4G) /YEAR 0.705 OZ (20G) /YEAR
1.41 OZ (40G) /YEAR
ULTRASONIC LEAK DETECTOR TYPE VPE
9997
The VPE Leak Detector represents state-of-the-art technology for pin-pointing leaks in
air conditioning/refrigeration systems. Able to detect both vacuum and pressure leaks,
the VPE overcomes the disadvantages inherent in other types of leak detectors.
No ultraviolet dyes or tracer gases are necessary, and the VPE can detect any gas,
even in a gas-saturated environment. The VPE offers both visual and sound identification
via the LED display and the included headset. Lightweight and easy to use, the VPE is
a tool every technician should have.
Features
• Detects any type of refrigerant gas.
• Battery-powered for cordless operation.
• Does not require tracer gases.
• Detects vacuum and pressure leaks.
• Headset and padded carrying case included.
• Adjustable sensitivity.
Specifications
• Nominal sensitivity: -80db / V / uBar.
• Frequency response: 38 to 42 kHz.
• Display: 10-bar element graph audio output.
• Power: 9V cell.
• Battery life: 15 hrs. continuous.
• Headset: dynamic 32 ohm.
• Size: 4.56” x 2.40” x 0.866”.
• Weight: 1/2Ib.
• Housing: durable PVC/aluminum.
69
LO
R-22, R-134a
9997
LEAK DETECTION
LEAK DETECTION
LEAK-TEC
4014
Leak-Tec is a non-toxic, nonflammable liquid that produces a white foam of live bubbles at
the point of leakage. The high viscosity enables the liquid to cling to surfaces long enough to
pinpoint leaks as small as .05oz. per year. The liquid spreads quickly and penetrates oil and
grease films common on metal surfaces. Used in small amounts, the mass of bubbles will
continue to foam as long as pressure is maintained on the equipment being tested. Leak-Tec is
stocked in 4oz., 8oz. and 1 gallon containers in two different formulas to fit most applications.
Additional formulas and container sizes are also available as special order.
Features
•Fast- quickly finds and pinpoints the smallest of leaks.
•Safe- does not affect metal or rubber and is nonflammable.
•Economical- a few drops do the job.
•Convenient- unbreakable dispenser bottle.
•Stocked in 4oz. and 8oz. squeeze bottles, and 1 gallon jugs.
Specifications
No.4014 Formula 372E.
Application: compressed air and stable gases.
Sensitivity: 1 x 10-5 std. cc of air per sec.
Temperature Range: +35°F to +160°F.
AVAILABLE SIZES
PART NO. CONTAINER
4014
4 OZ
4014-8OZ
8 OZ
THREAD CONNECTIONS
4014-GGALLON
Specifications
No.4015 Formula 372G.
Application: Refrigerants, low temp.
Sensitivity: 1 x 10-4 std. cc of air per sec.
Temperature Range: -35°F to +180°F.
MACHINE SURFACE CONNECTIONS
AVAILABLE SIZES
PART NO. CONTAINER
4015
4 OZ
4015-8OZ
8 OZ
4015-GGALLON
OTHER SIZES AVAILABLE AND SPECIAL FORMULAS AVAILABLE.
SOLDERED OR WELDED
CONNECTIONS
70
VOCATIONAL TRAINING UNITS
ASK FOR OUR VOCATIONAL TRAINING UNITS CATALOG!
PROVIDING DEDICATED AND HIGH QUALITY EDUCATIONAL TOOLS FOR TOMORROW’S HVAC/R INDUSTRY.
BASIC REFRIGERATION
AUTOMOTIVE AIR-CONDITIONING
TU-103
TU-100
GAS FIRED HEATING CONTROL BOARD
TABLETOP HEAT PUMP TRAINER
TU-701
71
TU-502
VOCATIONAL TRAINING UNITS
ASK FOR OUR VOCATIONAL TRAINING UNITS CATALOG!
PROVIDING DEDICATED AND HIGH QUALITY EDUCATIONAL TOOLS FOR TOMORROW’S HVAC/R INDUSTRY.
FUNDAMENTALS OF REFRIGERATION
INDUSTRIAL REFRIGERATION
TU-155
TU-420
RESIDENTIAL AIR-CONDITIONING
RESIDENTIAL WIRING DEMONSTRATOR
TU-206
TUE-200
TU-206
72
ELECTRICAL TOOLS
73
74
STRIPPERS & CRIMPERS
UPFRONT STRIPPERS-COMBINATION TOOLS
Wire looping hole
• Serrated pliers nose for pulling and looping wire.
• (6) upfront, precision-ground stripping stations for solid and stranded wire.
• Wire cutter.
• (6) screw sizing and cutting stations.
• Wire terminal and 7-8 mm automotive ignition crimp stations.
• Highly visible, easy-to-read graphics.
Low profile pivot
• Cushion grips.
hardware
• Available in AWG, metric or combination AWG/metric models.
Longer cutter handles heavier
wire. Curved cutter for improved
cutting action - requires less force
Screw cutter/sizing holes are close
to the pivot for more leverage easier to shear screws
IE-110
5-IN-1 COMBINATION TOOL
IE-110
• Strips: 22/20/18/16/14/12/10 AWG.
• Crimps insulated and non-insulated: 22-18, 16-10 AWG;
non-insulated: Auto 7 & 8 mm.
• Screw cutter: 4-40 / 5-40 / 6-32 / 8-32 / 10-32 / 10-24.
• Wire sizes, etc., are embossed in metal and paint-filled.
• Air-pocket cushion grips.
IE-112
IE-114
Conforms to ASME
Standard B107.500-2010
PART NO.
DESCRIPTION STRIPPER SIZE CUTTER TYPE
CRIMPS INSULATED CRIMPS NON - INSULATED SCREW CUTTER
(AWG)
(AWG)
(AWG)
75
NOM. LENGTH
(in.)
IE-110
Super 5-in-1 Combination 10-22
Curved-long
10-22
10-22
7-8 mm Auto
4-40 / 5-40 / 6-32
8-32 / 10-32 / 10-24
8-1/4
IE-112
Combination Metric/AWG 10-20, 0.75-6.0 mm2 Straight
10-22
10-22
7- 8 mm Auto
6-32 / 8-32 / 10-32
3.5/4.0/5.0 mm
9-1/2
IE-114
Metric
0.75-6.0 mm2, 10-22 Straight
1.5-6.O mm, 10-22
7-8 mm Auto
2.5/3.0/3.5/4.0/
4.5/5.0 mm
8-1/4
1.5-6.0 mm
10-22
STRIPPERS & CRIMPERS
UPFRONT CUTTERS/CRIMPERS
Stop for nose cutter
reduces blade wear
UPFRONT CUTTER/CRIMPER/STRIPPER
IE-136
• Curved cutter reduces force required to cut; longer blade length capable
of cutting NM-B cable in a single stroke.
• Wire looping holes in jaw.
• Screw cutter/sizing holes are moved closer to the pivot for more leverage,
making it easier to shear screws.
• Strips: 10-22 AWG.
• Crimps: insulated 10-22 AWG.
• Crimps: non-insulated 10-22 AWG, 7-8 mm Auto.
• Screw cutter: 4-40 / 6-32 / 8-32 / 10-32 / 10-24.
• Anvil-type wire cutter at nose of pliers.
Screw cutter/sizing holes are close
to the pivot for more leverage easier to shear screws
IE-136
Positive stop provides
consistent stripper
diameter; prevents
cutting strands of
conductor
Longer cutting blade with
curved design is engineered to
cut heavier wire with ease
IE-135
• Anvil-type wire cutter at nose of pliers.
• Insulated and non-insulated crimp stations.
• Screw sizing and cutting stations.
• Precision-ground stripping stations.
• Highly visible, easy-to-read graphics.
• Cushion grips.
IE-135
Conforms to ASME
Standard B107.500-2010
PART NO.
DESCRIPTION STRIPPER SIZE CUTTER TYPE
CRIMPS INSULATED CRIMPS NON - INSULATED SCREW CUTTER
(AWG) (AWG)
IE-135
IE-136
(AWG)
Crimper/Cutter with 10-22
Anvil
10-22
10-22, 7-8 mm Auto
6 Strip Stations
Upfront Cutter/
8-18 Solid
Anvil
10-22
10-22, 7-8 mm Auto
Crimper Stripper
10-22 Stranded
Curved-long
4-40 / 6-32 / 8-32 /
10-32 / 10-24
4-40 / 6-32 / 8-32 /
10-32 / 10-24
NOM. LENGTH
(in.)
8-3/4
8-1/2
76
STRIPPERS & CRIMPERS
UPFRONT STRIPPERS/CUTTERS
HEAVY-DUTY UPFRONT STRIPPERS & CUTTERS
High carbon, heat
treated steel
•Serrated pliers nose for pulling and working wire, small nuts, etc.
•AWG and metric wire sizes are embossed in steel and pad printed for high visibility.
•2-piece hardened steel pivot for lifetime service.
•Lock to protect cutting and stripping edges when stored.
•Spring return to help speed work.
•Large air-pocket cushion grips for greater comfort.
IE-120
Strips solid wire AWG gauges: 20/18/16/14/12/10 AWG;
.8/1.0/1.3/1.6/2.0/2.6 mm.
IE-125
Strips stranded wire AWG gauges: 26/24/22/20/16 AWG;
.40/.50/.65/.80/1.0/1.3 mm.
IE-130
Strips solid wire AWG gauges: 30/28/26/24/22 AWG;
.25/.32/.40/.50/.65 mm.
IE-132
Cutter for copper wire to 10 AWG and fine stranded cable.
IE-125
IE-130
Rust/corrosion resistant
black oxide finish on all
Imperial® electrical tools
2-piece hardened
steel pivot
Sealed air-pocket
cushion grips
PART NO. DESCRIPTIONSTRIPPER SIZE
CUTTER TYPE
NOM. LENGTH
Scissors
6-1/4
Scissors
6-1/4
Scissors
6-1/4
Scissors
6-1/4
(AWG)
IE-120
H-D Stripper/Cutter
IE-125
H-D Stripper/Cutter
IE-130
H-D Stripper/Cutter
77
IE-132
IE-120
IE-132
10-20 Solid
0.8-2.6 mm
16-26 Stranded
0.4-1.3 mm
22-30 Solid
0.25-0.65 mm
H-D Cutter
(in.)
Conforms to ASME
Standard B107.500-2010
STRIPPERS & CRIMPERS
UPFRONT STRIPPERS/CUTTERS
“V” STRIPPERS
•Strips and cuts solid and stranded wire.
•Adjustable stripping station.
•Scissors-action cutter.
•Holes in jaw for looping wire.
•Cushion grips.
•Available with lock and return spring.
Slide lock
Wire looping holes
Return spring
IE-116
Track adjustment
for setting strip size
PART NO.
DESCRIPTION
STRIPPER SIZE
CUTTER TYPE
NOM. LENGTH
IE-115
Economy “V” Stripper
• Track adjustment for setting
strip size
10-20
Scissors
5
IE-116
Standard “V” Stripper
• Track adjustment for setting
strip size
• Automatic Return Spring
• Slide Lock
10-20
Scissors
5
IE-115
Conforms to ASME
Standard B107.500-2010
IE-163 MINI CUTTER. Hardened, precision-ground cutter for stranded and
solid copper or aluminum wire. Ergonomic handles reduce
operator fatigue. Sealed air-pocket cushion grips for maximum
comfort.
IE-164 MINI STRIPPER. Precision-ground stripping stations
produce clean, exacting results in tight spaces. Strips
8-18 AWG solid, 10-22 AWG stranded and 0.34 - 6.0 mm2 wire.
Ergonomic handles with sealed air-pocket cushion grips for
maximum comfort.
IE-165 MINI CRIMPER. Precision-formed crimp pockets are
guaranteed to be free of any sharp edges or burrs which could
jeopardize a quality installation. Crimps insulated and
non-insulated 10-22 AWG. Ergonomic handles with sealed
air-pocket cushion grips provide maximum comfort and
reduce operator fatigue.
IE-162 3-PC KIT. Mini cutter, stripper and crimper in handy, reusable vinyl
pouch. Everything you need for easy and stable cutting,
stripping and crimping in tight places.
PART NO.
DESCRIPTION STRIPPER SIZE
(AWG)
IE-162
3 Pc. Kit-1 Each in Pouch 8-18 Solid
10-22 Stranded
0.34 - 6.0 mm2
IE-163
IE-165
IE-164
IE-163
CUTTER TYPE
10-22
Scissors
(AWG)
Scissors
8-18 Solid
10-22 Stranded
0.34 - 6.0 mm2
Mini Crimper
IE-165
Sealed airpocket
cushion
grips
CRIMPER
Mini Cutter
IE-164
Mini Stripper
(in.)
Ergonomic
handle design
MINI CUTTER, STRIPPER & CRIMPER FOR
WORKING IN TIGHT SPACES
(AWG)
10-22
NOM. LENGTH
(in.)
5-1/2
5-1/2
5-1/2
IE-162
78
NM-B CABLE TOOLS
NM-B CABLE STRIPPERS AND CUTTERS
IE-123 12-2 / 14-2 DUAL NM-B CABLE STRIPPER
Patented dual
precision-ground
stripping stations
For 12-2 and 14-2 type NM-B cable. Patented precision-ground
stripping stations. “Staggered” cutting blade produces a clean, sure cut
with 30-50% less effort. Also features serrated pliers nose, wire looping holes,
spring return, lock and 6-32 / 8-32 screw cutters. Tool markings have been redesigned
to be easier to read and highly visible. Includes air-pocket cushion grips for comfort.
IE-127 10-2/12-2 DUAL NM-B CABLE STRIPPER
IE-123
Patented “Staggered” precisionground cutter for clean, sure
cuts with 30-50% less effort
IE-127
IE-121 14-2 NM-B CABLE STRIPPER.
IE-126 12-2 NM-B CABLE STRIPPER.
Cuts cable and removes outer sheath; strips 14 AWG (MODEL IE-121) or
12 AWG (MODEL IE-126) wire. Features pliers nose for pulling and working
cable and small nuts. Precision-ground cutter and patented stripping
stations, spring return, lock and air-pocket cushion grips for comfort.
IE-124
IE-124 10-2 NM-B CABLE STRIPPER.
For 10-2 type NM-B cable. Patented heavy duty stripper/cutter for removing
outer jacket and stripping 10 AWG wires. Also features: pliers nose, large
staggered cutter, wire looping holes, spring return, lock and
6-32 / 8-32 screw sizing/cutting stations.
IE-121
PART NO.
IE-126
DESCRIPTION
STRIPPER SIZE
SCREW CUTTER
NOM. LENGTH
(in.)
10-2
B
NM -
B
NM -
7-3/4
6-1/4
7-3/4
12-2
Staggered
6-32 / 8-32
Curved
Staggered
6-32 / 8-32
B
6-1/4
7-3/4
NM -
Curved
Staggered
6-32 / 8-32
14-2
IE-121
14-2 NM-B Cable 14-2 NM-B, 14 AWG
IE-123
Dual NM-B Cable 12-2/14-2 NM-B
12-14 AWG
IE-124
10-2 NM-B Cable 10-2 NM-B, 10 AWG
IE-126
12-2 NM-B Cable 12-2 NM-B, 12 AWG
IE-127
Dual NM-B Cable 10-2/12-2 NM-B
10-12 AWG
79
CUTTER TYPE
(AWG)
MERCHANDISING
SELLING AIDS
TOOL CENTER SIGN
TH-103
• 7-1/2” H x 39”W vinyl.
TOOL CENTER PLANOGRAM KITS
• 6” H x 24”W vinyl header sign.
• 32” H x 24”W 2-sided vinyl planogram template - front side is pre-printed with a
suggested layout of best selling Imperial® HVAC and tube working tools. Use reverse
side to create your own Imperial display.
• Hooks and re-order tags included.
TM400P
TM400S
TM500P
TM500S
HEADER 6” H x 24”W
POP kit for pegboard - sheet, header, hooks and re-order tags.
POP kit for slatwall - sheet, header, hooks and re-order tags.
Includes TM400P kit and tools for the planogram layout (see chart below).
Includes TM400S kit and tools for the planogram layout (see chart below).
TM500P AND TM500S KITS
INCLUDE THESE TOOLS:
PART NO. DESCRIPTION
QTY
TC-1000SP
Tube Cutter
4
TC-1050SP
Tube Cutter
6
174-FSP
Tube Cutter
5
312-FCSP
Tube Cutter
4
195-FCSP
45° Flare Tool
3
500-FCSP
45° Rol-Air™ Flare Tool
3
193-SSP
Swage Punch Tool
4
368-FH
Triple Head Bender
3
127-C
Ratchet Wrench
6
16-C
Kwik-Coupler™ Adapter - Straight 6
17-C
Kwik-Coupler™ Adapter - 90°
6
FRONT
BACK
MANIFOLD, TUBE WORKING
& SPECIALTY TOOLS POSTERS
LT POSTERSET
• Set of (3) posters.
• 23”W x 35-1/2” H.
• Great for stores and tech schools.
“AUTHORIZED DISTRIBUTOR”
VINYL STATIC LABEL
BANNER
LTWD1
LT100BNR
•6”W x 9-1/2” H.
•Adheres to glass and smooth surfaces.
• 2’ H x 4’W vinyl with grommets for hanging.
80
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
1003................................ 58
5300................................ 60
125-C.............................. 33
195-7STDS KIT................. 34
195-F 28.......................... 34
26-C................................ 53
1011................................ 58
7001................................ 65
126-C.............................. 33
195-F 05.......................... 34
195-F 30.......................... 34
270-F-06......................... 15
1012................................ 58
7002................................ 65
127-C.............................. 33
195-F 06.......................... 34
195-F 30 mm.................. 34
270-F-08......................... 15
1101................................ 58
7005................................ 65
127-CO............................ 33
195-F 07.......................... 34
195-F 32.......................... 34
270-F-10......................... 15
1102................................ 58
7006................................ 65
140-F-04......................... 31
195-F 07 mm.................. 34
195-F 32 mm.................. 34
270-F-12......................... 15
1201................................ 58
7007................................ 66
140-F-06......................... 31
195-F 08.......................... 34
195-F 34.......................... 34
270-F-14......................... 15
1301................................ 58
7008................................ 66
140-F-08......................... 31
195-F 08 mm.................. 34
195-F 36.......................... 34
270-F-16......................... 15
1702................................ 62
7009................................ 65
140-F-10......................... 31
195-F 09.......................... 34
195-FB............................ 19
270-F-18......................... 15
1703................................ 62
7010................................ 65
140-F-12......................... 31
195-F 09 mm.................. 34
195-FC............................ 17
271-F.............................. 15
1705................................ 62
7013................................ 66
140-F-14......................... 31
195-F 10.......................... 34
195-SA............................ 26
275-FS............................ 24
1751................................ 62
7020................................ 66
140-F-18......................... 31
195-F 10 mm.................. 34
19-C...........................43, 53
275-FSC......................24, 28
1768................................ 62
7024................................ 66
140-F-22......................... 31
195-F 11.......................... 34
2000-FS.......................... 28
275-FSCD...................24, 28
1770................................ 62
7025................................ 57
140-F-26......................... 31
195-F 11 mm.................. 34
201-F.............................. 10
275-FSM......................... 24
1813................................ 64
7701................................ 56
142-F.............................. 31
195-F 12.......................... 34
203-FA............................ 17
278-FS-03X04X06........... 24
1832................................ 63
9997................................ 69
144-F................................ 8
195-F 12 mm.................. 34
203-MRS......................... 52
278-FS-05....................... 24
1833................................ 63
14571.............................. 50
144-FB.............................. 8
195-F 13.......................... 34
205-MRS......................... 52
278-FS-08..................24, 26
1834................................ 63
1003RK........................... 58
163-F.............................. 10
195-F 13 mm.................. 34
206-FB.............................. 6
278-FS-10..................24, 26
1843................................ 63
101-F.............................. 10
16-C................................ 53
195-F 14.......................... 34
206-FBP.........................6, 7
278-FS-12....................... 24
2001................................ 67
102-F-04......................... 10
174-F................................ 6
195-F 14 mm.................. 34
206-MRS......................... 52
278-FS-14....................... 26
2136................................ 68
102-F-05......................... 10
1751RK........................... 62
195-F 15.......................... 34
208-F.............................. 32
278-FSM-12.................... 24
2601................................ 68
102-F-06......................... 10
175-EX............................ 25
195-F 15 mm.................. 34
208-FSS........................... 32
278-FSM-14.................... 24
2602................................ 68
102-F-07......................... 10
175EX06.......................... 25
195-F 16.......................... 34
20-A...........................43, 53
278-FSM-15.................... 24
2605................................ 68
102-F-08......................... 10
175EX08.......................... 25
195-F 16 mm.................. 34
210-F.............................. 32
278-FSM-16.................... 24
3054................................ 61
102-F-10......................... 10
175EX10.......................... 25
195-F 17.......................... 34
213-MRS......................... 52
278-FSM-18.................... 24
4014................................ 70
102-F-12......................... 10
175EX12.......................... 25
195-F 17 mm.................. 34
214-MRS......................... 52
278-FSM-22.................... 24
4015................................ 70
102-F-14......................... 10
175EX14.......................... 25
195-F 18.......................... 34
215-MRS......................... 52
278-FSM-4-6-10............. 24
4036................................ 64
103-FS............................ 17
175EX16.......................... 25
195-F 18 mm.................. 34
216-MRS......................... 52
278-FSM-8...................... 24
4501................................ 50
105-FF............................. 31
175EX18.......................... 25
195-F 19.......................... 34
21-H................................ 43
27-C................................ 53
4510................................ 50
10-C................................ 57
175EX22.......................... 25
195-F 19 mm.................. 34
21-L................................ 43
293-F.............................. 23
4775................................ 50
10SG..........................46, 48
175EX26.......................... 25
195-F 20.......................... 34
227-FA.............................. 4
296-FC............................ 17
4900................................ 62
112-F.............................. 10
175EXC............................ 25
195-F 21 mm.................. 34
23-C................................ 53
300-FB............................ 17
5100................................ 59
120-F.............................. 27
175EXP............................ 25
195-F 22.......................... 34
241-F-03......................... 56
3054-230V...................... 61
5101................................ 58
1226-FA.......................... 27
17-C................................ 53
195-F 22 mm.................. 34
241-F-04......................... 56
307-FP.............................. 7
5125................................ 59
122-FA............................ 27
18-C................................ 53
195-F 23 mm.................. 34
2423-P............................ 49
312-FC.............................. 4
5150................................ 59
123-FA............................ 27
193-S.............................. 26
195-F 24.......................... 34
2425-CP.......................... 49
323-CR............................ 49
5175................................ 59
124-C.............................. 33
194-S.............................. 26
195-F 24 mm.................. 34
24-C................................ 53
325-CB............................ 49
5180................................ 60
124-FA............................ 27
195-4STDS KIT................. 34
195-F 26.......................... 34
25-K................................ 53
327-FP.............................. 7
5225................................ 60
12501A........................... 67
195-5STDM KIT............... 34
195-F 27 mm.................. 34
260-FHA.......................... 14
335-CKP.....................42, 46
81
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
336-CKP.....................42, 46
384-FA.............................. 6
417-C-6........................... 46
441-CRM......................... 49
505-C.........................41, 46
560-S-08......................... 23
345-FA............................ 31
395-C.........................42, 46
418-C.........................41, 46
443-C.............................. 46
507-FB............................ 20
560-S-10......................... 23
346-F-04......................... 31
395-CD.......................42, 46
419-C.............................. 46
447-F.............................. 21
507-FBM......................... 20
564-FH-06....................... 13
346-F-05......................... 31
395-CKP.....................42, 46
420-BCKP........................ 49
450-C.........................41, 46
510-C.........................40, 45
564-FH-08....................... 13
346-F-06......................... 31
395-FAM......................... 17
420-C.........................41, 46
450-CM........................... 46
510-CM......................40, 45
564-FHT-06..................... 13
346-F-08......................... 31
396-C.........................42, 46
420-RCKP........................ 49
451-C.........................41, 46
511-C.........................40, 45
566-CC............................ 45
346-F-10......................... 31
396-CD.......................42, 46
421-C.........................41, 46
451-CB............................ 49
511-CM......................40, 45
570-CKPC........................ 45
350-FHA.......................... 14
396-CKP.....................42, 46
421-CM........................... 46
451-CBM......................... 49
512-C.........................40, 45
572-CKPC........................ 45
360-FHA.......................... 14
397-CD.......................42, 46
422-C.........................41, 46
451-CM........................... 46
513-C.........................40, 45
572-FTY.....................52, 63
364-FH-02....................... 11
398-CC.......................42, 46
422-CB............................ 49
451-CR............................ 49
514-CC............................ 45
580-CKPSC...................... 45
364-FH-03....................... 11
398-CD.......................42, 46
422-CR............................ 49
451-CRM......................... 49
515-C.............................. 45
581-CKPSC...................... 45
364-FHA-04.................... 11
398-CKP.....................42, 46
423-CAM......................... 49
452-C.........................41, 46
520-C.........................40, 45
582-CKPC........................ 45
364-FHA-05.................... 11
400-F.............................. 21
423-CAPD........................ 49
452-C-6........................... 46
520-CA.................40, 43, 45
600-F.............................. 16
364-FHA-06.................... 11
400-RB.......................46, 49
423-CK............................ 49
452-CB............................ 49
520-CAM..............40, 43, 45
600-R...................46, 47, 48
364-FHA-07.................... 11
4014-8OZ........................ 70
423-CKP.......................... 49
452-CR............................ 49
520-CB............................ 45
601-R.........................46, 47
364-FHA-08.................... 11
4014-G............................ 70
423-CR............................ 49
454-C.............................. 46
521-C.........................40, 45
602-R...................46, 47, 48
364-FHA-10.................... 11
4015-8OZ........................ 70
424-CB............................ 49
455-C.............................. 46
521-CA.................40, 43, 45
603-MRS......................... 52
364-FHA-12.................... 11
4015-G............................ 70
424-CR............................ 49
456-C.............................. 46
521-CAM..............40, 43, 45
605-MRS......................... 52
364-FHA-14.................... 11
401-C.............................. 42
425-CAM......................... 49
466-C.............................. 42
522-C.............................. 45
606-MRS......................... 52
364-FHA-16.................... 11
401-FA............................ 21
425-CAPD........................ 49
470-FH.............................. 9
523-C.............................. 45
612-MRS......................... 52
364-FHAM-10MM........... 11
402-FA............................ 21
425-CB............................ 49
481-CKPC...................41, 46
525-CKPC........................ 45
620-C.........................39, 44
364-FHAM-12MM........... 11
4036-Q............................ 64
425-CK............................ 49
482-CKP.....................41, 46
525-F.............................. 18
620-CB............................ 44
364-FHAM-6MM............. 11
405-CB............................ 49
425-CKP.......................... 49
494-C.........................41, 46
526-CAC.......................... 45
620-CK............................ 44
364-FHAM-8MM............. 11
405-CR............................ 49
426-CKP.......................... 49
495-C.........................41, 46
535-C.............................. 55
620-CKP.......................... 44
364-FHB-04.................... 11
405-RH.......................46, 48
427-CKP.......................... 49
495-CB............................ 46
536-FTY.....................52, 63
620-CM........................... 44
364-FHB-05.................... 11
405-RL.......................46, 48
428-CKP.......................... 49
495-CD............................ 46
537-F.............................. 22
620-CS.......................39, 44
364-FHB-06.................... 11
406-CB............................ 49
429-CKP.......................... 49
495-CKP.......................... 46
540-CB............................ 45
621-C.........................39, 44
364-FHB-07.................... 11
406-CR............................ 49
431-CM........................... 49
496-C.........................41, 46
541-C.............................. 56
621-C-6........................... 44
364-FHB-08.................... 11
406-FA.............................. 6
432-CM........................... 49
496-CD............................ 46
542-C.............................. 56
621-CD............................ 45
364-FHBM-10MM........... 11
407-CB............................ 49
434-BKP.......................... 49
496-CKP.......................... 46
545-C.............................. 55
621-CK............................ 45
364-FHBM-12MM........... 11
407-CR............................ 49
434-RKP.......................... 49
498-C.........................41, 46
548-FTY.....................52, 63
621-CKP.......................... 45
364-FHBM-6MM............. 11
407-F.............................. 22
435-CKP.....................41, 46
500-C.........................41, 46
555-FS............................ 23
621-CM........................... 45
364-FHBM-8MM............. 11
407-FA............................ 22
436-CKP.....................41, 46
500-CD............................ 46
560-CB............................ 45
621-CS.......................39, 45
367-FH............................ 10
408-CB............................ 49
437-FB............................ 20
500-CD-6........................ 46
560-FTY.....................52, 63
622-C.........................39, 45
368-FH............................ 10
408-CR............................ 49
439-CA............................ 46
500-FC............................ 18
560-S-03......................... 23
622-CKP.......................... 45
370-FH............................ 10
415-C.........................41, 46
441-CB............................ 49
500-FCM......................... 18
560-S-04......................... 23
626-CSC.......................... 45
375-FS............................ 17
416-C.........................41, 46
441-CBM......................... 49
500-RH.......................46, 48
560-S-05......................... 23
629-C.........................39, 45
376-FS............................ 17
417-C.........................41, 46
441-CR............................ 49
500-RL.......................46, 48
560-S-06......................... 23
630-CKP.....................39, 45
82
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
630-CKPS...................39, 45
7009RK........................... 65
804-MRS......................... 51
821-CD............................ 44
855-MRR......................... 51
956-MRR......................... 51
631-CKP.....................39, 45
700-CV.......................46, 47
804-MRY......................... 51
821-CK............................ 44
855-MRS......................... 51
956-MRS......................... 51
631-CKP-6....................... 45
700-F.............................. 16
805-MAB......................... 43
821-CKP.......................... 44
855-MRY......................... 51
956-MRY......................... 51
631-CKPS...................39, 45
715-CC.......................38, 44
805-MAR......................... 43
821-CM........................... 44
856-MRB......................... 51
95-S................................ 26
637-F.............................. 22
717-CC.......................38, 44
805-MAS......................... 43
821-CS.......................37, 44
856-MRR......................... 51
9-C.................................. 57
640-C.........................39, 45
718-CC.......................38, 44
805-MAY......................... 43
822-C.........................37, 44
856-MRS......................... 51
CT-31-100....................... 58
640-CB............................ 45
720-CC.......................38, 44
805-MRB......................... 51
822-CKP.......................... 44
856-MRY......................... 51
CT-36-100....................... 58
640-FC-04....................... 57
721-CC.......................38, 44
805-MRR......................... 51
829-C.........................37, 44
903-MRB......................... 51
CT-42-100....................... 58
640-FC-06....................... 57
725-CC.......................38, 44
805-MRS......................... 51
830-CKP.....................37, 44
903-MRR......................... 51
CT-49-100....................... 58
641-C.........................39, 45
726-CC............................ 44
805-MRY......................... 51
830-CKPS...................37, 44
903-MRS......................... 51
CT-54-100....................... 58
641-CM........................... 45
740-CBC.....................38, 44
806-AB............................ 43
831-CKP.....................37, 44
903-MRY......................... 51
CT-59-100....................... 58
642-C.........................39, 45
741-CBC.......................... 44
806-AR............................ 43
831-CKPS...................37, 44
905-MRB......................... 51
CT-64-100....................... 58
644-C.........................39, 45
745-CBC.....................38, 44
806-AS............................ 43
840-C.........................37, 44
905-MRR......................... 51
CT-70-100....................... 58
644-CS.......................39, 45
745-CKPC...................38, 44
806-AY............................ 43
840-CB............................ 44
905-MRS......................... 51
G6400............................. 57
645-C.........................39, 45
750-CC.......................38, 44
806-MAB......................... 43
840-CKPSC...................... 44
905-MRY......................... 51
G6600............................. 57
646-C.........................39, 45
751-CC.......................38, 44
806-MAR......................... 43
841-C.........................37, 44
906-MRB......................... 51
GL-1000.......................... 68
650-C.........................39, 45
755-CC.......................38, 44
806-MAS......................... 43
841-CKPSC...................... 44
906-MRR......................... 51
GU1-4A........................... 57
651-C.........................39, 45
762-CKPC...................38, 44
806-MAY......................... 43
841-CM......................37, 44
906-MRS......................... 51
GU1-4B........................... 57
651-CKPSC...................... 45
7701RK........................... 56
806-MRB......................... 51
842-C.........................37, 44
906-MRY......................... 51
HLD-1201........................ 69
652-C.........................39, 45
800-MBB......................... 52
806-MRR......................... 51
843-CS............................ 44
93-FB.............................. 19
IE-110............................. 75
653-C.........................39, 45
800-MBR......................... 52
806-MRS......................... 51
844-C.........................37, 44
93-S-03........................... 26
IE-112............................. 75
660-CB............................ 45
800-MBS......................... 52
806-MRY......................... 51
844-CS.......................37, 44
93-S-04........................... 26
IE-114............................. 75
664-FH-04....................... 12
800-MBY......................... 52
808-MRB......................... 51
845-C.........................37, 44
93-S-05........................... 26
IE-115............................. 78
664-FH-06....................... 12
800-R.........................46, 47
808-MRR......................... 51
846-C.........................37, 44
93-S-06........................... 26
IE-116............................. 78
664-FH-08....................... 12
803-AB............................ 43
808-MRS......................... 51
846-CS............................ 44
93-S-08........................... 26
IE-120............................. 77
664-FH-10MM................ 12
803-AR............................ 43
808-MRY......................... 51
850-C.........................37, 44
93-S-10........................... 26
IE-121............................. 79
664-FH-12MM................ 12
803-AS............................ 43
812-MRB......................... 51
851-C.........................37, 44
93-S-12........................... 26
IE-123............................. 79
664-FH-6MM.................. 12
803-AY............................ 43
812-MRR......................... 51
852-C.........................37, 44
93-S-14........................... 26
IE-124............................. 79
664-FH-8MM.................. 12
803-MAB......................... 43
812-MRS......................... 51
853-C.........................37, 44
94-SSP............................ 26
IE-125............................. 77
680-CKPSC...................... 45
803-MAR......................... 43
812-MRY......................... 51
853-MRB......................... 51
953-MRB......................... 51
IE-126............................. 79
681-CKPSC...................... 45
803-MAS......................... 43
820-C.........................37, 44
853-MRR......................... 51
953-MRR......................... 51
IE-127............................. 79
7001GS........................... 65
803-MAY......................... 43
820-CB............................ 44
853-MRS......................... 51
953-MRS......................... 51
IE-130............................. 77
7001RK........................... 65
803-MRB......................... 51
820-CK............................ 44
853-MRY......................... 51
953-MRY......................... 51
IE-132............................. 77
7003GS........................... 65
803-MRR......................... 51
820-CKP.......................... 44
854-MRB......................... 51
955-MRB......................... 51
IE-135............................. 76
7003RK........................... 65
803-MRS......................... 51
820-CM........................... 44
854-MRR......................... 51
955-MRR......................... 51
IE-136............................. 76
7005GS........................... 65
803-MRY......................... 51
820-CS.......................37, 44
854-MRS......................... 51
955-MRS......................... 51
IE-162............................. 78
7005RK........................... 65
804-MRB......................... 51
821-C.........................37, 44
854-MRY......................... 51
955-MRY......................... 51
IE-163............................. 78
7009GS........................... 65
804-MRR......................... 51
821-C-6........................... 44
855-MRB......................... 51
956-MRB......................... 51
IE-164............................. 78
83
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
PART NO. PAGE NO.
IE-165............................. 78
S62275............................ 15
S62837............................ 15
S75015...................3, 4, 5, 8
TC-1050............................. 5
KCK-F.............................. 54
S62276............................ 15
S62838............................ 15
S75046.......................3, 4, 8
TC-1050RH........................ 5
KCK-M............................. 54
S62277............................ 15
S62839............................ 15
S75531............................ 26
TC-1051............................. 5
LT POSTERSET.................. 80
S62278............................ 15
S62840............................ 15
S76548.......................47, 48
TC-1550............................. 3
LT100BNR........................ 80
S62279............................ 15
S62841............................ 15
S76637...........................4, 8
TC-1560............................. 3
LTWD1............................. 80
S62280............................ 15
S62842............................ 15
S77511.............................. 8
TC-2050............................. 5
PT-109............................ 55
S62281............................ 15
S62869............................ 15
S7931801.......................... 8
TC-3050............................. 5
S10000265...................... 52
S62282............................ 15
S63412............................ 31
S7958301........................ 52
TC-3050RH........................ 5
S10000770........................ 8
S62283............................ 15
S64104.......................47, 48
S7958302........................ 52
TC-3051............................. 5
S10001087........................ 3
S62284............................ 15
S64108.......................47, 48
S8058801........................ 14
TE-BA01.......................... 57
S16002045...................... 55
S62285............................ 15
S64870.......................47, 48
S8058901........................ 14
TE-BA0145...................... 57
S16003162.....................4, 8
S62287............................ 15
S66434............................ 31
S8201501.......................... 8
TE-BV01-3....................... 52
S26883...........................5, 8
S62288............................ 15
S66435............................ 31
S8230301........................ 49
TE-BV01B........................ 52
S32633...........................5, 8
S62289............................ 15
S66914............................ 14
S8422701........................ 14
TE-BVO1R........................ 52
S38600............................ 24
S62290............................ 15
S68478............................ 14
S8442401........................ 14
TE-BV01Y........................ 52
S5951125........................ 54
S62291............................ 15
S68479............................ 14
S8485201........................ 14
TE-BV02-3....................... 52
S62156............................ 14
S62292............................ 15
S68480............................ 14
S8487001........................ 14
TE-BV02B........................ 52
S62244............................ 15
S62294............................ 15
S68481............................ 14
S8694401........................ 23
TE-BV02R........................ 52
S62245............................ 15
S62295............................ 15
S68492............................ 14
S8711201........................ 23
TE-BV02Y........................ 52
S62246............................ 15
S62296............................ 15
S68493............................ 14
S8771301........................ 23
TH-103............................ 80
S62247............................ 15
S62297............................ 15
S68496............................ 14
S8771601........................ 23
TM400P........................... 80
S62250............................ 15
S62298............................ 15
S68497............................ 14
S8771701........................ 23
TM400S........................... 80
S62251............................ 15
S62299............................ 15
S68502............................ 14
S8771801........................ 23
TM500P........................... 80
S62252............................ 15
S62300............................ 15
S69021.......................47, 48
S8920069........................ 54
TM500S........................... 80
S62253............................ 15
S62301............................ 15
S70348............................ 23
S8920071........................ 54
TU-100............................ 71
S62254............................ 15
S62302............................ 15
S70349............................ 23
S8920072........................ 54
TU-103............................ 71
S62255............................ 15
S62303............................ 15
S71174............................ 31
S8920073........................ 54
TU-155............................ 72
S62257............................ 15
S62304............................ 15
S71177............................ 31
S8920074........................ 54
TU-206............................ 72
S62258............................ 15
S62305............................ 15
S74197.............................. 8
S8920077........................ 54
TU-420............................ 72
S62260............................ 15
S62306............................ 15
S74447............................ 22
S8920082........................ 54
TU-502............................ 71
S62261............................ 15
S62307............................ 15
S74455............................ 22
S8920261........................ 54
TU-701............................ 71
S62262............................ 15
S62641............................ 31
S74460............................ 22
S8920263........................ 54
TUE-200.......................... 72
S62263............................ 15
S62648............................ 31
S74462............................ 22
S8921626........................ 52
U7001............................. 65
S62264............................ 15
S62655............................ 31
S74761.............................. 8
T-516.............................. 61
U7002............................. 65
S62265............................ 15
S62661............................ 31
S74762...........................5, 8
TB-52.............................. 33
U7005............................. 65
S62266............................ 15
S62666............................ 31
S74833.............................. 8
TC-1000............................. 4
U7006............................. 65
S62268............................ 15
S62835............................ 15
S74834.............................. 8
TC-1010............................. 4
U7009............................. 65
S62269............................ 15
S62836............................ 15
S74844.............................. 3
TC-1020............................. 4
U7010............................. 65
PART NO. PAGE NO.
84
LIFETIME WARRANT Y
Any product manufactured by Stride Tool Inc. that fails to render service due to defect in workmanship or materials will
be replaced or repaired at no charge. Product failures due to misuse, abuse, normal wear and tear or alterations are
not covered by the Lifetime Warranty. Wear items (such as cutter wheels, seals, gaskets, o-rings and gauges)
will need to be replaced over time, and are not included. Stride Tool makes no other warranty, expressed or implied.
Tools should be returned to the buyer’s place of purchase.
30333 Emerald Valley Parkway • Glenwillow, OH 44139 USA
Phone (440) 247.4600 • (888) 467.8665 • Fax (440) 715.4718 • (800) 527.6383
www.imperial-tools.com • www.stridetool.com
[email protected]
PIP—PRODUCT IDEA PROGRAM. We are always looking for new and innovative product ideas. Under Stride Tool’s PIP,
your new tool idea may earn you a significant PIP royalty. Send your idea or a letter to the address above, ATTN: Marketing
Director, or visit the Inventors Wanted page on our website at www.imperial-tools.com for an Idea Submission application.
© 2013 Stride Tool Inc.
Printed in U.S.A
LT2013HVAC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement