mixed signal and mixed domain oscilloscopes

mixed signal and mixed domain oscilloscopes
OSCILLOSCOPES SELECTION
MIXED SIGNAL AND MIXED DOMAIN OSCILLOSCOPES
MSO/DPO2000B
MDO3000
Channels
2, 4 analog channels;
16 digital channels (MSO2000B)
2, 4 analog channels; 16 digital channels (MDO3MSO option)
1 spectrum analyzer input
1 Arbitrary/Function Generator (MDO3AFG option)
Bandwidth
70 MHz to 200 MHz
100 MHz to 1 GHz
Spectrum Analyzer
Frequency Range
—
Standard: 9 kHz to Analog Bandwidth
Optional: 9 kHz to 3 GHz
Sample Rate
1 GS/s (analog);
1 GS/s (digital, only 1 pod);
500 MS/s (digital, both pods)
2.5 GS/s to 5 GS/s (analog);
121.2 ps (8.25 GS/s) MagniVu™ (digital)
Max Record Length
1 Mpoints
10 Mpoints
Trigger Types
Edge, Logic, Pulse Width, Runt, Setup and Hold, Rise/Fall
Time, Video, I2C*, SPI*, CAN*, LIN*, RS-232/422/485/UART*,
Parallel (MSO2000B)
Edge, Sequence, Logic, Pulse Width, Runt, Timeout, Setup and Hold,
Rise/Fall Time, Video, Extended Video, I2C*, SPI*, CAN FD*, CAN*, LIN*,
FlexRay*, RS-232/422/485/UART*, I2S/LJ/RJ/TDM*, MIL-STD-1553*,
USB 2.0*, Parallel (with MDO3MSO option)
Additional Resources
*Optional
*Optional
Optional Serial Bus
Decode and Analysis
DPO2AUTO: CAN and LIN
DPO2COMP: RS-232/422/485/UART
DPO2EMBD: I2C, SPI
DPO2BND: Includes DPO2AUTO, DPO2COMP, DPO2EMBD
MDO3AERO: MIL-STD-1553
MDO3AUDIO: I2S, LJ, RJ, TDM
MDO3AUTO: CAN FD, CAN and LIN
MDO3COMP: RS-232/422/485/UART
MDO3EMBD: I2C, SPI
MDO3FLEX: FlexRay
MDO3USB: USB2.0
MDO3BND: Enables MDO3AERO, MDO3AUDIO, MDO3AUTO,
MDO3COMP, MDO3EMBD, MDO3FLEX, MDO3LMT, MDO3PWR,
MDO3USB
Connectivity
USB Host, USB Device, GPIB*, Optional DPO2CONN Module:
LAN (10/100 Base-T Ethernet) and Video Out *Optional
USB Host (x2), USB Device, LAN (10/100 Base-T Ethernet, LXI Core
2011 Compliant), Video Out, GPIB* *Optional
Waveform Math
and Analysis
29 Automated Measurements, Waveform and Screen Cursors:
Arithmetic Waveform Math, FFT
44 Automated Measurements, Waveform and Screen Cursors,
Advanced Math, FFT, Measurement Statistics, Waveform Histograms
Optional:
MDO3PWR: Power Analysis
MDO3LMT: Limit/mask test
MDO3BND: Enables MDO3AERO, MDO3AUDIO, MDO3AUTO,
MDO3COMP, MDO3EMBD, MDO3FLEX, MDO3LMT, MDO3PWR,
MDO3USB
Software
PC communications software: OpenChoice® Desktop
PC Communications Software: OpenChoice® Desktop
• Add serial bus triggering and decode
•
•
•
•
•
•
•
Upgrade
8 |
TEK.COM/OSCILLOSCOPE
Increase bandwidth
Add Arbitrary/Function generator
Add 16 digital channels
Increase spectrum analyzer maximum frequency to 3 GHz
Add measurements and analysis (power, limit/mask)
Add serial bus triggering and decode
Add security for password control of ports and irmware updates
OSCILLOSCOPES SELECTION
MIXED SIGNAL AND MIXED DOMAIN OSCILLOSCOPES
AND ADVANCED SIGNAL OSCILLOSCOPES
MDO4000C
MSO/DPO5000B
Channels
4 analog channels; 16 digital channels (with MDO4MSO option);
1 spectrum analyzer input (with SA3 or SA6 option);
1 Arbitrary/Function Generator (with MDO4AFG option)
4 analog channels;
16 digital channels (MSO5000B)
Bandwidth
200 MHz to 1 GHz
350 MHz to 2 GHz
Spectrum Analyzer
Frequency Range
Optional:
9 kHz - 3 GHz or 9 kHz - 6 GHz
—
Sample Rate
2.5 GS/s to 5 GS/s (analog);
60.6 ps (16.5 GS/s) MagniVu™ (digital)
5 GS/s to 10 GS/s (analog);
60.6 ps (16.5 GS/s) MagniVu™ (digital)
Max Record Length
20 Mpoints
Up to 250 Mpoints
Additional Resources
Trigger Types
RF Power Level**, Edge, Sequence, Logic, Pulse Width, Runt, Timeout,
Setup and Hold, Rise/Fall Time, Video, Extended Video*, I2C*, SPI*, USB*,
Ethernet*, CAN FD*, CAN*, LIN*, FlexRay*, RS-232/422/485/UART*, I2S/
LJ/RJ/TDM*, MIL-STD-1553*, Parallel* *Optional
**With optional MDO4TRIG module, RF power level can be used as source for Pulse Width,
Timeout, Runt, Logic, Sequence
Edge, Sequence, Logic, Pulse Width, Glitch, Runt, Timeout,
Transition, Setup and Hold, Rise/Fall Time, Video, I2C*, SPI*,
USB (Low, Full, High)*, RS-232/422/485/UART*, I2C*, SPI*,
USB*, Ethernet*, CAN*, LIN*, FlexRay*, RS-232/422/485/UART*,
MIL-STD-1553*, Parallel (MSO5000B), Visual Trigger *Optional
Optional Serial Bus
Decode and Analysis
DPO4AERO: MIL-STD-1553
DPO4AUDIO: I2S, LJ, RJ, TDM
DPO4AUTO: CAN FD, CAN and LIN
DPO4AUTOMAX: CAN FD, CAN, LIN and FlexRay
DPO4COMP: RS-232/422/485/UART
DPO4EMBD: I2C, SPI
DPO4ENET: 10Base-T, 100Base-TX Ethernet
DPO4USB: USB
DPO4BND: Enables DPO4AERO, DPO4AUDIO, DPO4AUTO,
DPO4COMP, DPO4EMBD, DPO4ENET, DPO4LMT, DPO4PWR,
DPO4USB, DPO4VID
SR-AERO: MIL-STD-1553
SR-AUTO: CAN/LIN/FlexRay
SR-COMP: RS-232/422/485/UART
SR-DPHY: MIPI D-PHY
SR-EMBD: I2C, SPI
SR-ENET: 10/100Base-T Ethernet
SR-USB: USB
Connectivity
USB Host (x4), USB Device, LAN (10/100/1000 Base-T Ethernet,
LXI Core 2011 Compliant), Video Out, GPIB*
*Optional
USB Host (x6), USB Device, LAN (10/100/1000 Base-T
Ethernet, LXI Class C Compliant), Video Out, GPIB* *Optional
Waveform Math
and Analysis
44 Automated Measurements, Waveform and Screen Cursors,
Spectrum Math, FFT, Advanced Math, Measurement Statistics,
Waveform Histograms
Optional:
DPO4LMT: Limit and Mask Testing
MDO4TRIG: Adv. RF Power Level Trigger
DPO4PWR: Power Analysis
DPO4VID: HDTV and Custom Triggering
DPO4BND: Enables DPO4AERO, DPO4AUDIO, DPO4AUTO,
DPO4COMP, DPO4EMBD, DPO4ENET, DPO4LMT, DPO4PWR,
DPO4USB, DPO4VID
53 Automated Measurements, Waveform and Screen Cursors,
Arithmetic and Advanced Waveform Math, FFT, Measurement
Statistics, Waveform Histograms, Waveform Limit Testing
Optional:
BRR: BroadR-Reach Compliance Test; DDRA: DDR Memory
Bus Analysis; DJA: DPOJET Advanced Jitter and Eye Diagram
Analysis; ET3: Ethernet Compliance Test Solution; MTM: Mask
Testing; PWR: Power Analysis; SignalVu Vector Signal Analysis;
USB2: USB Compliance Test Solution; MOST: MOST 50/150
Compliance Test Solution; HSIC: HSIC Electrical Validation;
USBPWR: USB Power Adapter/ EPS Compliance Automated
Test Solution
Software
PC Communications Software: OpenChoice® Desktop
Vector Signal Analysis Software: SignalVu-PC
Optional:
TekScope Anywhere™
Upgrade
•
•
•
•
•
•
•
•
•
•
•
•
Increase bandwidth
Add Arbitrary/Function Generator
Add 16 digital channels
Add or upgrade spectrum analyzer channel
Add measurements & analysis (power, limit/mask, video, RF trigger)
Add serial bus triggering and decode
Add security for password control of ports and irmware updates
Add 16 digital channels
Add extended record length, up to 250 Mpoints
Add serial bus compliance testing
Add measurements and analysis (power, jitter, mask, RF)
Add serial bus triggering and decode
TEK.COM/OSCILLOSCOPE
| 9
OSCILLOSCOPES SELECTION
ADVANCED SIGNAL ANALYSIS OSCILLOSCOPES
DPO7000C
MSO/DPO70000
Channels
4 analog channels
4 analog channels;
16 digital channels (MSO70000)
Bandwidth
500 MHz to 3.5 GHz
4 GHz to 33 GHz Analog
Sample Rate
10 GS/s to 40 GS/s
25 GS/s to 100 GS/s (analog);
80 ps (12.5 GS/s) (digital)
Max Record
Length
Up to 500 Mpoints
Up to 1Gpoints
Trigger Types
Pinpoint™ Triggering, Edge, Glitch, Pulse Width, Runt, Time-out,
Transition. Setup/Hold, Pattern, State, Window, Trigger Delay (by
Time and by Event), I2C*, SPI*, USB (Low, Full)*, RS-232/422/485/
UART*, I2C*, SPI*, USB*, Ethernet*, CAN*, LIN*, FlexRay*,
RS-232/422/485/UART*, MIL-STD-1553, Visual Trigger *Optional
Pinpoint™ Triggering, Edge, Glitch, Pulse Width, Runt, Time-out,
Transition, Setup/Hold, Pattern, State, Window, Trigger Delay (by Time
and by Event), I2C*, SPI*, USB (Low, Full)*, RS-232/422/485/UART*,
Serial Pattern*, Visual Trigger*
*Optional
Optional Serial
Bus Decode
and Analysis
SR-AERO: MIL-STD-1553
SR-AUTO: CAN/LIN/FlexRay
SR-COMP: RS-232/422/485/UART
SR-DPHY: MIPI D-PHY
SR-EMBD: I2C, SPI
SR-ENET: 10/100Base-T Ethernet
SR-PCIE: PCI Express
SR-USB: USB
SR-AERO: MIL-STD-1553; SR-AUTO: CAN/LIN/FlexRay; SR-COMP:
RS-232/422/485/UART; SR-DPHY: MIPI D-PHY; SR-EMBD: I2C, SPI;
SR-ENET: 10/100Base-T Ethernet
SR-PCIE: PCI Express; SR-USB: USB; SR-810B: 8b/10b; 10G-KR:
10GBASE-KR/KR4
Connectivity
USB Host (x5), LAN (10/100/1000 Base-T Ethernet, LXI Class C
Compliant), GPIB, eSATA, DVI, VGA
USB Host (x5), LAN (10/100/1000 Base-T Ethernet, LXI Class C
Compliant), GPIB, eSATA, DVI, VGA
Waveform Math
and Analysis
53 Automated Measurements, Waveform and Screen Cursors,
Arithmetic and Advanced Waveform Math, FFT, Measurement
Statistics, Waveform Histograms, Waveform Limit Testing
Optional:
BRR: BroadR-Reach Compliance Test; DDRA: DDR Memory Bus
Analysis; DJA: DPOJET Advanced Jitter and Eye Diagram Analysis;
D-PHY: MIPI D-PHY Essentials; ET3: Ethernet Compliance Test
Solution; MTM: Mask Testing; PWR: Power Analysis; SignalVu
Vector Signal Analysis; USB2: USB Compliance Test Solution;
MOST: MOST 50/150 Compliance Test Solution; HSIC: HSIC
Electrical Validation; USBPWR: USB Power Adapter/ EPS
Compliance Automated Test Solution
53 Automated Measurements, Waveform and Screen Cursors,
Arithmetic and Advanced Waveform Math, FFT, Measurement Statistics,
Waveform Histograms
Optional:
BRR: BroadR-Reach Compliance Test; DDR Memory Bus Analysis;
DPOJET Advanced Jitter and Eye Diagram Analysis; Ethernet
Compliance; Waveform Limit Testing; Mask Testing; Power Analysis;
USB2 and USB3 Compliance and Analysis; USB Power Adapter/ EPS
Compliance Automated Test Solution; MOST 50/150 Compliance Test;
SignalVu Vector Signal Analysis; HDMI Compliance Test; HSIC Electrical
Validation; MIPI D-PHY and M-PHY Characterization and Analysis; SAS
Testing; SFP+ Compliance and Debug; Serial Data Link Analysis;
10G-KR Compliance and Debug; PCIe Compliance and Debug;
Thunderbolt Characterization, Compliance and Debug; UHS
Measurements; PAM4 Transmitter Analysis Software; SignalCorrect
Cable, Channel and Probe Compensation Software
Software
Optional:
TekScope Anywhere™
Optional:
TekScope Anywhere™
Upgrade
• Trade in older DPO7000 Series models for credit toward the
newest DPO7000C version (50% credit of the old scope price)
• Add extended record length, up to 500 Mpoints
• Add serial bus compliance testing
• Add measurements and analysis (power, jitter, mask, RF)
• Add serial bus triggering and decode
•
•
•
•
•
•
•
Additional Resources
10 | TEK.COM/OSCILLOSCOPE
Increase bandwidth
Add 16 digital channels
Upgrade older platforms to the latest platforms
Add extended record length, up to 1 Gpoints
Add serial bus compliance testing
Add measurements and analysis (jitter, DDR, mask, RF)
Add serial bus triggering and decode
OSCILLOSCOPES SELECTION
ADVANCED SIGNAL ANALYSIS
AND SAMPLING OSCILLOSCOPES
DPO70000SX
DSA8300
Channels
2 or 4 analog channels
Six modules support up to 8 single ended or
4 differential channels and/or 2 optical channels
Bandwidth
23 GHz to 70 GHz
Up to 70+ GHz Electrical bandwidth and 80+ Optical bandwidth
modules available with intrinsic jitter as low as <100 fs RMS
Sample Rate
50 GS/s to 200 GS/s
300 ks/s Maximum sample rate
Max Record
Length
Up to 1Gpoints
50 to 16,000 per channel native record length; with up to
1M points when using available IConnect Signal Integrity
Software, 10M samples (100k unit intervals, 100 samples
per unit interval) when equipped with available 80SJNB
Jitter, Noise and BER Analysis software
Trigger Types
Pinpoint™ Triggering, Edge, Glitch, Pulse Width, Runt, Time-out,
Transition, Setup/Hold, Pattern, State, Window, Trigger Delay
(by Time and by Event), Visual Trigger* *Optional
Clock Input/Prescale Trigger, TDR clock (generated
internally), Clock Recovery from Optical Sampling modules
and Electrical Clock Recovery modules, and Phase
Reference time base supports acquisitions Free Run mode
and Trigger Direct Input for <100 fs RMS intrinsic jitter typical
Optional Serial Bus
Decode and Analysis
SR-COMP: RS-232/422/485/UART; SR-EMBD: I2C, SPI; SR-ENET:
10/100Base-T Ethernet SR-PCIE: PCI Express; SR-USB: USB; SR-810B: 8b/10b
80SJNB Jitter, Noise, BER, Serial Data Link and PAM4 Analysis
Software; IConnect Signal Integrity Software; 100GBASE-SR4
Transmitter & Dispersion Eye Closure (TDEC) Automation Test Solution
Connectivity
USB2.0 Host (4 on front)/3.0 Host (4 on rear), USB Device, LAN
(10/100/1000 Base-T Ethernet, LXI Class C Compliant), DVI, VGA,
DisplayPort (2)
3 USB 2.0 Port(s) connector on the front panel, 4 USB 2.0 Ports
on the rear panel; LAN PORT, RJ-45 connector, supports
10BASE-T, 100BASE-T, 1000BASE-T on rear panel;
1 Serial Port, DB-9 COM1, COM2 ports; 1 DVI IEEE488.2
connector on rear panel; 1 DVI connector, female on rear panel,
DVI to VGA 15-pin D-sub connector adapter provided; PS2
Serial Ports Mouse and keyboard inputs; Audio Ports 1/8 in.
microphone input and line output
Waveform Math
and Analysis
53 Automated Measurements, Waveform and Screen Cursors, Arithmetic and
Advanced Waveform Math, FFT, Measurement Statistics, Waveform Histograms
Optional: DPOJET Noise, Jitter and Eye Analysis Tools; Frequency Counter-Timer;
PAM4 Transmitter Analysis Software; Serial Data Link Analysis; 10G/40G/100G
KR4/CR4 Transmitter Compliance; DDR Memory Bus Analysis; DisplayPort 1.2/1.4
Test Software; MIPI D-PHY Transmitter Debug and Compliance Test Solution;
EDP Compliance Test Package; Ethernet Compliance Testing; Fiber Channel
Essentials; HDMI 2.0 Analysis and Compliance; High Speed Serial Link Training
Analysis; HDMI Compliance Testing; MIPI M-PHY Debug and Compliance Test;
NBASE-T TekExpress Conformance and Debug Software; PCI Express Gen1/2/3/4
TekExpress Compliance/Debug; Power Measurement and Analysis Software;
SAS-3 Tx Compliance Test; SATA PHY Transmitter Test; SignalCorrect Cable,
Channel, and Probe Compensation Software; SFP+ Compliance and Debug
Solution; Embedded Serial Triggering and Analysis (I2C, SPI); USB 2.0/3.0/3.1
Automated Compliance Test; SignalVu Vector Signal Analysis
Over 120 automated measurements include RZ, NRZ, and
pulse signal types, and the following measurement types, plus
8 math waveforms using the following math functions: Add,
Subtract, Multiply, Divide, Average, Differentiate, Exponential,
Integrate, Natural Log, Log, Magnitude, Min, Max, Square
Root, and Filter. In addition, measurement values can be
utilized as scalars in math waveform deinitions; Mask support
for many applications, standard masks are available as
predeined, built-in masks; Automated Masked Margin based
on Mask Hit Ratio as required by many standards.
Optional: TekScope Anywhere™
Windows® 7 Ultimate (32-bit) Operating System; IConnect
Signal Integrity Software for frequency domain analysis,
S-parameter measurements, and impedance characterization
80SJNB Jitter, Noise, BER, and Serial Link analysis including
Cross-Talk aware TJ (BUJ and PAM4 Analysis); 80SJARB Jitter
Analysis of Arbitrary Data with J2-J9 measurements, and
support for pattern lengths to PRBS31; 100GBASE-SR4 (IEEE
802.3bm) optical transmitter characterization measurements,
including TDEC, signaling rate, Average Launch Power, OMA,
ER, Transmitter Eye Mask
Additional Resources
Software
Upgrade
•
•
•
•
Increase bandwidth
Upgrade older platforms to the latest platforms
Add extended record length, up to 1 G points
Add measurements and analysis
(jitter, mask, RF)
• Modular architecture lets you add channels or bandwidth
• Add TDR, optical and electrical standards support
• Add advanced analysis, compliance test, frequency domain
analysis software
• Add clock recovery trigger pickoff (CRTP) to select optical modules
• Enhance system jitter loor performance to <100 fs RMS
TEK.COM/OSCILLOSCOPE | 11
OSCILLOSCOPES SELECTION
BASIC OSCILLOSCOPES
TBS1000
TBS1000B/
TBS1000B-EDU
TBS2000
Channels
4
2
2, 4
Bandwidth
60 MHz to 150 MHz
* 30 MHz TBS1032B available in
North America and Europe
Sample Rate
1 GS/s
500 MS/s to 2 GS/s
1 GS/s
Max Record Length
2.5 k points
2.5 k points
20 M points
Trigger Types
Edge, Pulse (width), Video
Edge, Pulse (width), Video
Edge, Pulse (width), Runt
Optional Serial Bus
Decode and Analysis
—
—
—
Connectivity
USB Host, USB Device,
Optional: GPIB
USB Host, USB Device,
Optional: GPIB
USB Host, Wi-Fi adapter support,
10/100 Base-T Ethernet port
Waveform Math
and Analysis
16 Automated Measurements, Arithmetic
Waveform Math, FFT, Waveform Limit
Testing, Automated Datalogging
34 Automated Measurements, Arithmetic
Waveform Math, FFT, Dual-Channel
Frequency Counter, Waveform Limit Testing*,
TrendPlot™ function*, Automated Datalogging*
32 Automated Measurements,
Arithmetic Waveform Math, FFT,
Frequency Counter
Additional Resources
30 MHz* to 200 MHz
70 MHz , 100 MHz
* Not available on EDU models
Software
PC Communications Software:
OpenChoice® Desktop, Educator
Classroom and Lab Resource CD
PC Communications Software:
OpenChoice® Desktop Software,
PC Courseware Editor Tool, Product
Documentation and Lab Resource CD
PC Communications Software:
OpenChoice® Desktop,
PC Courseware Editor
Battery Operation
—
—
—
Teaching Oscilloscopes
TBS2000 and TBS1000B-EDU Oscilloscopes have unique
features designed to meet the needs of schools and universities.
They use an innovative courseware system that enables
educators to build teaching materials into the oscilloscope.
Along with a powerful PC Courseware Editor Tool and a
courseware website, these oscilloscopes support a complete
education ecosystem that makes it easier to teach engineering
and easier to learn.
LEARN MORE
12 | TEK.COM/OSCILLOSCOPE
OSCILLOSCOPES SELECTION
BATTERY POWERED OSCILLOSCOPES WITH ISOLATED
CHANNELS AND TDS SERIES OSCILLOSCOPES
THS3000
TPS2000B
TDS2000C
TDS3000C
Channels
4 (isolated)
2, 4 (isolated)
2, 4
2, 4
Bandwidth
100 MHz to 200 MHz
100 MHz to 200 MHz
50 MHz to 200 MHz
100 MHz to 500 MHz
Sample Rate
2.5 GS/s to 5 GS/s
1 GS/s to 2 GS/s
500 MS/s to 2 GS/s
1.25 GS/s to 5 GS/s
Max Record Length
10 k points
2.5 k points
2.5 k points
10 k points
Trigger Types
Edge, Pulse (width), Event,
Video, Non-interlaced
Edge, Pulse (width), Video
Edge, Pulse (width), Video
Edge, Logic (Pattern, State), Pulse
(Glitch, Width, Runt, Slew Rate), Video,
Optional: Extended Video, Comm
Optional Serial Bus
Decode and Analysis
—
—
—
—
Connectivity
USB Host, USB Device
RS-232 (includes RS-232-to-USB
Host Serial Cable), Centronics,
CompactFlash
USB Host, USB Device,
Optional: GPIB
USB Host, LAN (10Base-T Ethernet)
Optional: TDS3GV Module: GPIB,
RS-232, and Video Out
Waveform Math
and Analysis
21 Automated
Measurements, Arithmetic
Waveform Math, FFT
11 Automated Measurements,
Arithmetic Waveform Math, FFT
Optional: TPS2PWR1: Power
Measurement and Analysis
16 Automated Measurements,
Arithmetic Waveform Math,
FFT, Waveform Limit Testing,
Automated Datalogging
25 Automated Measurements, Arithmetic
Waveform Math, FFT Optional: TDS3LIM:
Limit Testing, TDS3TMT: Telecom Mask
Testing, TDS3VID: HDTV & Custom
Video Triggering
Software
PC Communications
Software: OpenChoice®
Desktop
PC Communications Software:
OpenChoice® Desktop
PC Communications Software:
OpenChoice® Desktop
PC Communications Software:
OpenChoice® Desktop
Battery Operation
One THSBAT Battery Pack
Included Standard
One TPSBAT Battery Pack
Included Standard
—
Requires Optional TDS3BATC
Battery Pack
Additional Resources
TEK.COM/OSCILLOSCOPE | 13
MIXED SIGNAL AND MIXED DOMAIN OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• Integrated 6-in-1 oscilloscope that offers a
spectrum analyzer, arbitrary function generator,
logic analyzer, protocol analyzer and digital
voltmeter
• Spectrum Analyzer standard on all models
• 10 Mpoint record length on all channels
• >280,000 wfm/s max. waveform capture rate with
FastAcq
• Automated search and waveform navigation with
Wave Inspector®
Monitor slowly changing RF events at
a glance with spectrogram display.
MDO3000 Series
This scope features six integrated instruments to capture analog, digital
and RF signals with one scope. And add instruments, analysis functions
and bandwidth as your needs change.
MODELS
ANALOG
CHANNELS
DIGITAL
CHANNELS
ANALOG
BANDWIDTH
ANALOG
SAMPLE
RATE
DIGITAL SAMPLE RATE
MAIN/MAGNIVU™
SPECTRUM
ANALYZER
INPUT
SPECTRUM ANALYZER
FREQUENCY RANGE
STANDARD/OPTIONAL
MDO3012
2
16
100 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 100 MHz / 9 kHz - 3 GHz
MDO3014
4
16
100 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 100 MHz / 9 kHz - 3 GHz
MDO3022
2
16
200 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 200 MHz / 9 kHz - 3 GHz
MDO3024
4
16
200 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 200 MHz / 9 kHz - 3 GHz
MDO3032
2
16
350 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 350 MHz / 9 kHz - 3 GHz
MDO3034
4
16
350 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 350 MHz / 9 kHz - 3 GHz
MDO3052
2
16
500 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 500 MHz / 9 kHz - 3 GHz
MDO3054
4
16
500 MHz
2.5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 500 MHz / 9 kHz - 3 GHz
MDO3102
2
16
1 GHz
5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 1 GHz / 9 kHz - 3 GHz
MDO3104
4
16
1 GHz
5 GS/s
500 MS/s / 8.25 GS/s
1
9 kHz - 1 GHz / 9 kHz - 3 GHz
INSTRUMENT OPTIONS**
APPLICATION MODULES
RECOMMENDED PROBES
MDO3AFG
Arbitrary function generator
Current Probes
MDO3MSO
16 digital channels;
includes P6316 digital
probe and accessories
Serial Bus Triggering and Protocol
Analysis
MDO3SA
MDO3SEC
Increase spectrum analyzer
input frequency range
to 9 kHz – 3 GHz
Add password protected
security to enable or disable
all communication ports
and irmware upgrades
APPLICATION MODULES
MDO3BND
Enables MDO3AERO,
MDO3AUDIO, MDO3AUTO,
MDO3COMP, MDO3EMBD,
MDO3FLEX, MDO3LMT,
MDO3PWR, MDO3USB
MDO3FLEX
Automotive (FlexRay)
MDO3USB*
USB 2.0 (LS, FS, HS)
Additional Analysis
MDO3PWR
Power Analysis
MDO3LMT
Limit/Mask Test
RECOMMENDED PROBES
Passive Voltage Probes
TPP0502
2X, 500 MHz, 300 V
CAT II
High Voltage Probes
TMDP0200
250X/25X, 200 MHz,
± 750 V / ± 75 V
THDP0200
1000X/100X, 100 MHz,
± 6000 V / ± 600 V
MDO3AUDIO Audio
(I2S, LJ, RJ and TDM)
TPP0850
50X, 800 MHz,
2500 V Peak
MDO3AUTO
Isolated Measurement Systems
Serial Bus Triggering and Protocol Analysis
MDO3AERO
Aerospace
(MIL-STD-1553)
Automotive
(CAN FD, CAN, LIN)
MDO3COMP Computer
(RS-232)
14 | TEK.COM/MDO3000
TCP0020
50 MHz, 20 A DC/20
A RMS/100 A Peak/10 mA Min
TCP0030A
120 MHz, 30 A DC/30
A RMS/50 A Peak/1 mA Min
TCP0150
20 MHz, 150 A DC/150
A RMS/500 A Peak/5 mA Min
MDO3EMBD Embedded (I2C, SPI)
TIVM Series
Up to 1 GHz, ± 50 VDiff,
2000 VCM, 120 dB CMRR
SHIPS WITH PRODUCT
• One Low C Passive Probe Per Channel, TPP1000 on
1 GHz Models, TPP0500B on 350 and 500 MHz Models,
TPP0250 on all 100 and 200 MHz Models
• One P6316 16 Channel Logic Probe
(with option MDO3MSO only)
• N-to-BNC Adapter
• OpenChoice® Desktop
• Calibration Certiicate, Installation and
Safety Manual, & Documentation on CD
• Accessory Bag
• Front Panel Language Overlay (if other than English)
• Power Cord
• 3-year Warranty
* USB 2.0 HS only available on 1 GHz analog bandwidth models
and only for HS analysis.
** Can be preconigured from the factory or ordered as stand-alone
upgrade kits.
MIXED SIGNAL AND MIXED DOMAIN OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 6-in-1 oscilloscope offers a spectrum analyzer,
arbitrary/function generator, logic analyzer, protocol
analyzer and digital voltmeter
• Spectrum analyzer available in 3 GHz or 6 GHz
frequency ranges with up to 3.75 GHz capture
bandwidth
• 20 Mpoint record length on all channels
• >340,000 wfm/s max. waveform capture rate with
FastAcq
Use it as an oscilloscope OR a
spectrum analyzer OR combined to
capture synchronized analog, digital
and RF signals.
MDO4000C Series
The MDO4000C offers up to six built-in instruments, each with
exceptional performance to address tough challenges. It’s completely
customizable and fully upgradable. Every MDO4000C features powerful
triggering, search and analysis, and these are the only scopes to offer
synchronized analog, digital and RF signal analysis at the same time –
perfect for troubleshooting problems with EMI or wireless communications.
See how your RF spectrum changes
over time or device state.
MODELS
ANALOG
CHANNELS
DIGITAL
ANALOG
CHANNELS* BANDWIDTH
ANALOG
SAMPLE
RATE
SPECTRUM
DIGITAL SAMPLE RATE
ANALYZER
MAIN/MAGNIVU™
INPUT*
OPTIONAL SPECTRUM
ANALYZER FREQUENCY
RANGE
MDO4024C
4
16
2.5 GS/s
500 MS/s /16.5 GS/s
9 kHz – 3 GHz or 6 GHz
200 MHz
1
MDO4034C
4
16
350 MHz
2.5 GS/s
500 MS/s /16.5 GS/s
1
9 kHz – 3 GHz or 6 GHz
MDO4054C
4
16
500 MHz
2.5 GS/s
500 MS/s /16.5 GS/s
1
9 kHz – 3 GHz or 6 GHz
MDO4104C
4
16
1 GHz
5 GS/s
500 MS/s /16.5 GS/s
1
9 kHz – 3 GHz or 6 GHz
* Optional
APPLICATION MODULES
RECOMMENDED PROBES
INSTRUMENT OPTIONS
DPO4BND
Passive Voltage Probes
Enables DPO4AERO,
DPO4AUDIO,
DPO4AUTO,
DPO4COMP,
DPO4EMBD, DPO4ENET,
DPO4LMT, DPO4PWR,
DPO4USB, DPO4VID
Serial Bus Triggering and Protocol Analysis
DPO4AERO
Aerospace
(MIL-STD 1553)
DPO4AUDIO
Audio (I2S, LJ, RJ
and TDM)
DPO4AUTO
Automotive
(CAN FD, CAN, LIN)
DPO4AUTOMAX
Automotive
(CAN FD, CAN, LIN,
FlexRay)
DPO4COMP
Computer (RS-232)
DPO4EMBD
Embedded (I2C, SPI)
DPO4ENET
Ethernet (10BASE-T,
100BASE-TX)
DPO4USB*1
MDO4AFG
Arbitrary/function generator
TPP1000
10X, 1 GHz, 300 V CAT II
MDO4MSO
TPP0500B
10X, 500 MHz, 300 V
CAT II
16 digital channels, includes
P6616 digital probe and accessories
SA3
3 GHz Spectrum Analyzer
TPP0502
2X, 500 MHz, 300 V CAT II
SA6
6 GHz Spectrum Analyzer
MDO4SEC
Add password protected security to
enable or disable communications
and irmware upgrades
Active Voltage Probes
TAP1500
Differential Voltage Probes
TDP0500
50X/5X, 500 MHz,
± 42 V/± 4.2 V
SHIPS WITH PRODUCT
TDP1000
50X/5X, 1 GHz,
± 42 V/± 4.2 V
• Four TPP0500B (≤500 MHz models) or TPP1000
(1 GHz models) Passive Voltage Probes
High Voltage Probes
THDP0200
500X/50X, 200 MHz,
± 1500 V/± 150 V
TPP0850
50X, 800 MHz,
2500 V Peak
MDO4TRIG
Adv. RF Power Level Triggering
DPO4PWR
Power Analysis
DPO4LMT
Limit and Mask Testing
• OpenChoice® Desktop Software,
SignalVu-PC Software
• Calibration Certificate, Quick Reference Manual
& Documentation on CD
• Front Panel Cover, Accessory Bag, Power Cord
Current Probes
TCP0030A
USB 2.0 (LS, FS, HS)
Additional Analysis
10X, 1.5 GHz, ± 8 V
120 MHz, 30 A
DC/30 A RMS/50 A
Peak/1 mA Min
• 3-year Warranty
*1
USB 2.0 HS only available on 1 GHz analog bandwidth models.
Isolated Measurement Systems
TIVM Series
Up to 1 GHz, ± 50 VDiff,
2000 VCM, 120 dB CMRR
DPO4VID
HDTV & Custom Video Triggering
RECOMMENDED SERVICE
SignalVuPC-SVE
Vector Signal Analysis
Software
T3/T5
3-/5-year Total
Protection Plan
TEK.COM/MDO4000 | 15
MIXED SIGNAL AND MIXED DOMAIN OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 1 Mpoint record length on all channels
• Over 125 available trigger combinations, including
setup/hold, serial packet and parallel data
• Automated search and easy waveform navigation
with Wave Inspector®
• 29 automated measurements and FFT analysis
• 5-year warranty
Quickly pan/zoom and automatically
search your waveforms with Wave
Inspector®.
MSO/DPO2000B Series
Automatically trigger, decode and
search your serial buses with optional
analysis modules.
Test more, spend less with an oscilloscope that’s packed with features
and is also light on price. Measure as many as 20 channels of analog
and digital signals. Speed debug with automated serial and parallel bus
analysis. Search your entire record instantly with Wave Inspector®.
Entry level has never been so powerful.
MODELS
ANALOG CHANNELS
DIGITAL CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
DPO2002B
2
—
70 MHz
1 GS/s
MSO2002B
2
16
70 MHz
1 GS/s
DPO2004B
4
—
70 MHz
1 GS/s
MSO2004B
4
16
70 MHz
1 GS/s
DPO2012B
2
—
100 MHz
1 GS/s
MSO2012B
2
16
100 MHz
1 GS/s
DPO2014B
4
—
100 MHz
1 GS/s
MSO2014B
4
16
100 MHz
1 GS/s
DPO2022B
2
—
200 MHz
1 GS/s
MSO2022B
2
16
200 MHz
1 GS/s
DPO2024B
4
—
200 MHz
1 GS/s
MSO2024B
4
16
200 MHz
1 GS/s
APPLICATION MODULES
RECOMMENDED PROBES
Serial Bus Triggering and Protocol Analysis
Passive Voltage Probes
DPO2BND
TPP0200
Includes DPO2AUTO,
DPO2COMP,
DPO2EMBD
DPO2AUTO Automotive (CAN, LIN)
DPO2COMP Computer
(RS-232/422/485/UART)
DPO2EMBD Embedded (I2C, SPI)
TAP1500*1
10X, 1.5 GHz, ± 8 V
TDP0500*1
500 MHz, ± 42 V/± 4.25 V
200 MHz, ± 1500 V/± 150 V
DPO2CONN Ethernet and Video Out
Connectivity Module
THDP0100*1
Soft Carrying Case
SHIPS WITH PRODUCT
High Voltage Probes
TMDP0200*1 200 MHz, ± 750 V/± 75 V
ACD2000
Need more bandwidth? The MDO3000 Series offers
up to 1 GHz analog bandwidth.
Differential Voltage Probes
RECOMMENDED ACCESSORIES
TekVPI External Power
Supply
Need an arbitrary/function generator for your project?
The MDO3000 Series features six integrated instruments
to capture analog, digital and RF signals with one scope.
200 MHz, 300 V CAT II
Active Voltage Probes
THDP0200*1
119-7465xx
ANOTHER PRODUCT FOR CONSIDERATION
• One TPP0100 100MHz, 10X Passive Probe Per Analog
Channel (70 MHz model)
100 MHz, ± 6000 V/± 600 V
Current Probes
• One TPP0200 200 MHz, 10X Passive Probe Per Analog
Channel (100 MHz & 200 MHz models)
TCP2020
50 MHz, 20 A DC/20 A RMS/100
A Peak/10 mA Min
• One P6316 16 Channel Logic Probe (MSO only)
TCP0030A*1
120 MHz, 30 A DC/30 A RMS/50
A Peak/1 mA Min
• Calibration Certiicate, Quick Reference Manual
& Documentation on CD, Power Cord
TCP0150*1
20 MHz, 150 A DC/150 A
RMS/500 A Peak/5 mA Min
• 5-year Warranty
• OpenChoice® Desktop Software
*1
16 | TEK.COM/MSO2000
Requires 119-7465-xx TekVPI External Power Supply.
ADVANCED SIGNAL ANALYSIS OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 350 MHz, 500 MHz, 1 GHz, and 2 GHz models
• >250,000 wfm/s max. waveform capture rate with
FastAcq™ technology
• 10 GS/s max sampling and 250 Mpoints memory
(optional)
• Extensive analysis including jitter/timing and user
deined math (i.e., MATLAB)
• Visual triggering standard with search and mark
Achieve greater than 11 bits vertical
resolution with HiRes sampling and
reduce unwanted noise while
capturing signal details.
MSO/DPO5000B Series
Today’s faster data rates and tighter timing margins require an oscilloscope
with outstanding signal acquisition performance and analysis capabilities.
Tektronix MSO/DPO5000B Series oscilloscopes provide exceptional signal
idelity, with 2 GHz and 10 GS/s sample rate, along with advanced analysis
and math capabilities. MSO models include 16 digital timing channels, and
all models can be equipped to decode common serial protocols, to provide
a comprehensive view of your systems.
Perform advanced protocol triggering
and decode on mid-speed and
low-speed serial and buses
(optional).
MODELS
ANALOG
CHANNELS
DIGITAL
CHANNELS
ANALOG
BANDWIDTH
ANALOG SAMPLE RATE
(4 CHANNELS/2
CHANNELS)
DIGITAL SAMPLE RATE
MAIN/MAGNIVU™
DPO5034B
4
—
350 MHz
5 GS/s
—
MSO5034B
4
16
350 MHz
5 GS/s
500 MS/s /16.5 GS/s
DPO5054B
4
—
500 MHz
5 GS/s
—
MSO5054B
4
16
500 MHz
5 GS/s
500 MS/s /16.5 GS/s
DPO5104B
4
—
1 GHz
5 GS/s /10 GS/s
—
MSO5104B
4
16
1 GHz
5 GS/s /10 GS/s
500 MS/s /16.5 GS/s
DPO5204B
4
—
2 GHz
5 GS/s /10 GS/s
—
MSO5204B
4
16
2 GHz
5 GS/s /10 GS/s
500 MS/s /16.5 GS/s
SOFTWARE PACKAGES
RECOMMENDED PROBES
Serial Bus Triggering and Protocol Analysis
Passive Voltage Probes
SR-AERO
MIL-STD-1553B
TPP1000
10X, 1 GHz, 300 V CAT II
SR-AUTO
CAN/LIN/FlexRay
TPP0502
2X, 500 MHz, 300 V CAT II
SR-COMP
Computer (RS-232)
Active Voltage Probes
• One P6616 16 Channel Logic Probe (MSO only)
SR-DPHY
MIPI D-PHY
TAP1500
10X, 1.5 GHz, ± 8 V
• Calibration Certiicate, Mouse, Stylus
SR-EMBD
Embedded (I2C, SPI)
TAP2500
10X, 2.5 GHz, ± 4 V
SR-ENET
Ethernet
• Front Panel Cover, Accessory Bag, Power Cord
SR-USB
USB 2.0 (LS, FS, HS)
Compliance Test
BRR
BroadR-Reach
ET3
Ethernet
MOST
MOST50/150
USB2
USB 2.0
Additional Analysis
Differential Voltage Probe
TDP0500
500 MHz, ± 42 V/± 4.2 V
TDP1000
1 GHz, ± 42 V/± 4.2 V
TDP1500
1.5 GHz, ± 8.5 V/± 850 mV
High Voltage Probes
TMDP0200 200 MHz, ± 750 V/± 75 V
THDP0200 200 MHz, ± 1500 V/± 150 V
• Four TPP0500B (350 MHz and 500 MHz models) or
TPP1000 (1 GHz and 2 GHz models) Passive Voltage
Probes
• 1-year Warranty
INSTRUMENT OPTIONS
Record Length
Opt. 5RL
50M/Ch
Opt. 10RL
125M/Ch
Limitations apply. See data sheet for full details.
THDP0100 100 MHz, ± 6000 V/± 600 V
DDRA
DDR Memory
DJA
Advanced Jitter Analysis
TPP0850
HSIC
HSIC Electrical Characterization
Current Probes
PS2, PS3
Power Solution Bundles
TCP0020
PWR
Power Analysis
SVE
SignalVu RF Analysis
TCP0030A 120 MHz, 30 A DC/30 A
RMS/50 A Peak/1 mA Min
USBPWR
USB Power Compliance
TCP0150
Additional software packages are available.
For a complete listing, please visit tek.com/mso5000
SHIPS WITH PRODUCT
50X, 800 MHz, 2500 V Peak
50 MHz, 20 A DC/20 A
RMS/100 A Peak/10 mA Min
RECOMMENDED SERVICE
R3
3-year Extended Warranty
R5
5-year Extended Warranty
20 MHz, 150 A DC/150 A
RMS/500 A Peak/5 mA Min
Isolated Measurement Systems
TIVM
Series
Up to 1 GHz, ± 50 VDiff,
2000 VCM, 120 dB CMRR
TEK.COM/MSO5000 | 17
ADVANCED SIGNAL ANALYSIS OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 500 MHz,1 GHz, 2.5 GHz, and 3.5 GHz models
• Windows 7 Ultimate 64-bit operating system and
touch-screen display
• >250,000 wfm/s max. waveform capture rate with
FastAcq™ technology
• Over 1400 available trigger combinations with
Pinpoint® triggering
• Automated search and mark for waveform events
• 53 automated measurements and FFT analysis
DPO7000C Series
Includes the DPOJET essentials jitter
and eye pattern analysis software
package - free.
Get into the details of critical high-speed signals and ind the most
elusive signal anomalies. These oscilloscopes offer measurement and
decoding packages for many of today’s communications and memory
bus standards. Fast waveform capture rate, Pinpoint® triggering, and
Visual Trigger & Search will help you solve the most frustrating
troubleshooting mysteries, fast. And jitter analysis comes in every box.
Over 30 optional software packages
available for specialized applications.
MODELS
ANALOG CHANNELS
BANDWIDTH
RECORD LENGTH
(1/2/4 CHANNELS)
ANALOG
SAMPLE RATE
DPO7054C
4
500 MHz
125/50/25 M
20/10/5 GS/s
DPO7104C
4
1 GHz
125/50/25 M
20/10/5 GS/s
DPO7254C
4
2.5 GHz
125/50/25 M
40/20/10 GS/s
DPO7354C
4
3.5 GHz
125/50/25 M
40/20/10 GS/s
SOFTWARE PACKAGES
RECOMMENDED PROBES
Serial Bus Triggering and Protocol Analysis
Active Voltage Probes
SR-AERO
MIL-STD-1553B
TAP1500
10X, 1.5 GHz, ± 8 V
SR-AUTO
CAN/LIN/FlexRay
TAP2500
10X, 2.5 GHz, ± 4 V
SR-COMP
Computer (RS-232)
TAP3500
10X, 3.5 GHz, ± 4 V
SR-DPHY
MIPI D-PHY
Differential Voltage Probe
SR-EMBD
Embedded (I2C, SPI)
TDP0500
500 MHz, ± 42 V/± 4.2 V
SR-ENET
Ethernet
TDP1000
1 GHz, ± 42 V/± 4.2 V
INSTRUMENT OPTIONS
SR-PCIE
PCI Express
TDP1500
1.5 GHz, ± 8.5 V/± 850 mV
Record Length
SR-USB
USB 2.0 (LS, FS, HS)
TDP3500
3.5 GHz, ± 2 V
Opt. 5RL
50M/Ch
Opt. 10RL*1
125M/Ch
Compliance Test
High Voltage Probes
BRR
BroadR-Reach
TMDP0200
200 MHz, ± 750 V/± 75 V
ET3
Ethernet
THDP0200
200 MHz, ± 1500 V/± 150 V
MOST
MOST50/150
THDP0100
100 MHz, ± 6000 V/± 600 V
USB2
USB 2.0
Current Probes
Additional Analysis
TCP0020
50 MHz, 20 A DC/20 A
RMS/100 A Peak/10 mA Min
TCP0030A
120 MHz, 30 A DC/30 A
RMS/50 A Peak/1 mA Min
TCP0150
20 MHz, 150 A DC/150 A
RMS/500 A Peak/5 mA Min
DDRA
DDR memory
DJA
Advanced Jitter Analysis
HSIC
HSIC Electrical Characterization
PS2, PS3
Power Solution Bundles
PWR
Power Analysis
Isolated Measurement Systems
SVE
SignalVu RF Analysis
USBPWR
USB Power Compliance
TIVM Series Up to 1 GHz, ± 50 VDiff,
2000 VCM, 120 dB CMRR
Additional software packages are available.
For a complete listing, please visit tek.com/dpo7000
18 | TEK.COM/DPO7000
RECOMMENDED SERVICE
R3
3-year Extended Warranty
R5
5-year Extended Warranty
SHIPS WITH PRODUCT
• Four P6139B 500 MHz, 10X Passive Voltage Probes
• Calibration Certiicate, Accessory Pouch, Mouse
• Front Panel Cover, Power Cord
• 1-year Warranty
Limitations apply. See data sheet for full details.
*1
Not available on DPO7054C, DPO7104C
LEARN MORE
with “Understanding
and Characterizing Timing
Jitter” Primer.
Understanding and Characterizing
Timing Jitter
Primer
ADVANCED SIGNAL ANALYSIS OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 4 to 33 GHz true analog bandwidth for measurements
on the latest high-speed serial standards
• 100 GS/s Sample Rate on 2 Channels
• 16 Logic Channels with 80 ps Timing Resolution for
Debug of Digital and Analog Signals (MSO70000 models)
• iCapture – One Connection for both Analog and
Digital Signals (MSO70000 models)
• Fastest Waveform Capture Rate with >300,000
wfms/s Maximum
• Up to 1 Gpoints Record Length with MultiView
Zoom™ for Quick Navigation and Advanced Search
MSO/DPO70000C and DX Series
• Visual Trigger to Precisely Qualify Triggers and
Find Unique Events in Complex Waveforms
Whether you’re at irst power-up on your latest design, verifying
compliance to the fastest standards, or researching fundamentals
of the universe, you have the performance, precision, and tools to
get your job done faster.
Nearly 50 Application-speciic
Solutions Enable Standard-speciic
Certiication, Measurement
Automation, and Extended Signal
Analysis.
MODELS
ANALOG CHANNELS +
DIGITAL CHANNELS
ANALOG
BANDWIDTH
SAMPLE RATE
(2/4
CHANNELS)
RECORD LENGTH
(STD/OPT)
MSO/DPO70404C
4 (DPO), 4 + 16 (MSO)
4 GHz
25 GS/s
31 Mpoints/125 Mpoints
MSO/DPO70604C
4 (DPO), 4 + 16 (MSO)
6 GHz
25 GS/s
31 Mpoints/125 Mpoints
MSO/DPO70804C
4 (DPO), 4 + 16 (MSO)
8 GHz
25 GS/s
31 Mpoints/125 Mpoints
MSO/DPO71254C
4 (DPO), 4 + 16 (MSO)
12.5 GHz
100/50 GS/s
31 Mpoints/250 Mpoints
MSO/DPO71604C
4 (DPO), 4 + 16 (MSO)
16 GHz
100/50 GS/s
31 Mpoints/250 Mpoints
MSO/DPO72004C
4 (DPO), 4 + 16 (MSO)
20 GHz
100/50 GS/s
31 Mpoints/250 Mpoints
MSO/DPO72304DX
4 (DPO), 4 + 16 (MSO)
23 GHz
100/50 GS/s
31 Mpoints/1 Gpoints
MSO/DPO72504DX
4 (DPO), 4 + 16 (MSO)
25 GHz
100/50 GS/s
31 Mpoints/1 Gpoints
SOFTWARE PACKAGES
RECOMMENDED PROBES
INSTRUMENT OPTIONS
Serial Bus Triggering and Protocol Analysis
P7700
8 GHz to 20 GHz TriMode with
TekFlex Connector Technology
Opt. ERRDT
Frame and Bit Error Rate Detector
for High-speed Serial Standards
P7600
25 GHz to 33 GHz TriMode
with Remote Head Design
Opt. ST6G
Protocol Triggering and Decoding for
8b/10b-encoded Serial Signals up to
6.25 Gb/s
Opt. SSD
Solid State Drive
(Standard on DX models)
Opt. 5XL
62.5M/Ch Record Length
(Standard on MSO Models)
Opt. 10XL
125M/Ch Record Length
Opt. 20XL
250M/Ch Record Length
SR-AERO
MIL-STD-1553B
SR-AUTO
CAN/LIN/FlexRay
SR-COMP
Computer (RS-232)
SR-DPHY
MIPI D-PHY
P7500
4 GHz to 25 GHz TriMode
SR-EMBD
Embedded (I2C, SPI)
P6780
Differential Input Logic
Probe (MSO Models)
P6750
D-Max Technology Probe
(MSO Models)
P6717A
General-purpose Logic Probe
(Standard on MSO Models)
SR-ENET
10/100Base-T Ethernet
SR-PCIE
PCI Express
SR-USB
USB 2.0 (LS, FS) , USB 3.0
Compliance Test
DisplayPort, Ethernet, HDMI, HSIC, MHL,
MIPI D-PHY/M-PHY, SATA/SAS, SFP+,
Thunderbolt, MOST50/150, USB 2.0/
USB 3.0/USB 3.1, USB Power Adapter/
EPS, 10GBASE-KR/KR4
P6250/
P6251
500 MHz/1 GHz 42 V
Differential
TCPA300/
TCPA400
Series Current
Measurement Systems
Additional Analysis
MTH
Communications Mask Testing
DDRA
DDR Memory
DJA
Advanced Jitter and Eye Diagram
PWR
Power Analysis
SDLA64
Serial Data Link Analysis Visualizer
SVE
SignalVu RF Analysis
VET
Visual Trigger/Search
PAM4
Transmitter Analysis
Software
Signal
Correct
Cable, Channel and Probe
Compensation Software
RECOMMENDED SERVICE
G3
Gold Care 3-year
Extended Warranty
G5
Gold Care 5-year
Extended Warranty
R3
3-year Extended Warranty
R5
5-year Extended Warranty
SHIPS WITH PRODUCT
Accessory pouch, front cover, mouse, keyboard, user
manual, (4) TekConnect® to 2.92 mm adapters and (1)
TekConnect-to-BNC adapter, static protection wrist strap,
MSO/DPO70000 software/GPIB reference on instrument
HDD, performance veriication procedure PDF ile,
calibration certiicate documenting NIST traceability, Z
540-1 compliance and ISO9001, power cord, one-year
warranty, MSO Models Include: P6717A Logic Probe,
Logic Probe Deskew Fixture
Please see datasheet for a complete list of current
software packages and options.
TEK.COM/DPO70000 | 19
ADVANCED SIGNAL ANALYSIS OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 70 GHz bandwidth with the industry’s lowest noise,
highest ENOB
• Compact, scalable package allows you to position
units very close to the device under test
• UltraSync architecture ensures precise data
synchronization and convenient Master/Extension
operation in multi-unit systems
• 200 GS/s sample rate for 5 ps timing resolution
• Up to 1 Gpoints Record Length with MultiView
Zoom for Quick Navigation and Advanced Search
DPO70000SX Series
Enable comprehensive analysis and
presentation of optical modulation
systems with Coherent Optical
Modulation Analysis software.
DPO70000SX 70 GHz Oscilloscope provides lowest-noise, real-time
acquisition using Tektronix’ patented Asynchronous Time Interleaving
technology. Its compact, scalable package allows lexible system
conigurations. Get the most accurate real-time performance for
ultra-bandwidth applications like coherent optical modulation,
100G/400G Datacom, wideband RF, and leading-edge research.
Precisely characterize your system’s
performance with DPOJET Advanced
Jitter and Eye Diagram measurement
application.
MODELS
ANALOG CHANNELS ANALOG BANDWIDTH
SAMPLE RATE
RECORD LENGTH
(STD/OPT)
DPO77002SX
1, 2
200GS/s, 100GS/s
62.5 Mpoints/1 Gpoints
70 GHz, 33 GHz
DPS77004SX (2-unit system)
2, 4
70 GHz, 33 GHz
200GS/s, 100GS/s
62.5 Mpoints/1 Gpoints
DPO75002SX
1, 2
50 GHz, 33 GHz
200GS/s, 100GS/s
62.5 Mpoints/1 Gpoints
DPS75004SX (2-unit system)
2, 4
50 GHz, 33 GHz
200GS/s, 100GS/s
62.5 Mpoints/1 Gpoints
DPO73304SX
2, 4
33 GHz, 23 GHz
100GS/s, 50GS/s
62.5 Mpoints/1 Gpoints
DPS73308SX (2-unit system)
4, 4
33 GHz, 23 GHz
100GS/s, 50GS/s
62.5 Mpoints/1 Gpoints
DPO72304SX
2, 4
23 GHz, 23 GHz
100GS/s, 50GS/s
62.5 Mpoints/1 Gpoints
SOFTWARE PACKAGES
SOFTWARE PACKAGES
DJA
DPOJET Advanced Jitter and Eye
Diagram Analysis
100G-TXE
100G Ethernet KR4/CR4/CAUI4
Transmitter Test
SDLA64
Serial Data Link Analysis Visualizer
SATA-TSG
SVE
SignalVu RF Analysis
SATA PHY/TSG/OOB
Transmitter Tests
VET
Visual Trigger/Search
USB2
USB 2.0 Automated
Compliance Test
PAM4
Transmitter Analysis Software
SC
SignalCorrect Cable, Channel
and Probe Compensation
Software
DDRA
DDR Memory Bus Analysis
SR-810B
8b/10b
D-PHY
MIPI D-PHY Debug and
Compliance Test Software
SR-COMP
Computer (RS-232)
SR-EMBD
Embedded (I2C, SPI)
USBSSP-TX USB 3.1 Automated
TX Compliance Test
Serial Bus Analysis
DP13
DisplayPort 1.4 Source
Test Automation Software
SR-ENET
10/100Base-T Ethernet
ET3
Ethernet Compliance Testing
SR-PCIE
PCI Express
FRQCNT
Frequency Counter-Timer
SR-USB
UB 2.0 (LS, FS)
HSSLTA
High Speed Serial Link Training
Analysis
HT3
HDMI Compliance Testing
RECOMMENDED ACCESSORIES
DPO7RFK1
60 GHz RF Attenuator Kit
M-PHYTX
M-PHY
Automated Transmitter Solution
DPO7RFK2
60 GHz RF RF
Signal Path Kit
SDLA64
Serial Data Link
Analysis Visualizer
DPO7RFK3
65 GHz RF Channel
Timing Deskew Kit
PCE4
PCI Express Gen1/2/3/4
Compliance/Debug Software
DPO7RFC1
SAS3
SAS-3 Tx Compliance
Test Application
DPO7RFC2
DPO7RFC3
20 | TEK.COM/DPO70000SX
24-inch Matched
Cable Pair
24-inch Phase-Stable Coaxial Cable
36-inch Phase-Stable Coaxial Cable
SHIPS WITH PRODUCT
Accessory pouch, front cover, mouse, keyboard, user
manual, TekConnect® to 2.92 mm adapters, static
protection wrist strap, DPO70000SX software/GPIB
reference on instrument SSD, performance verification
procedure PDF file, calibration certificate documenting
NIST traceability, Z 540-1 compliance and ISO9001,
power cord, one-year warranty
RECOMMENDED PROBES
TekConnect Channels Only
P7600
25 GHz to 33 GHz TriMode
with Remote Head Design
P7700
8 GHz to 20 GHz TriMode with
TekFlex Connector Technology
INSTRUMENT OPTIONS
Opt. 10XL
125M/Ch Record Length
Opt. 20XL
250M/Ch Record Length
Opt. 50XL
500M/Ch Record Length/1G on 2 Channels
RECOMMENDED SERVICE
G3
Gold Care 3-year Extended Warranty
G5
Gold Care 5-year Extended Warranty
R3
3-year Extended Warranty
R5
5-year Extended Warranty
SAMPLING OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• High Optical Sensitivity, Low Noise, and Wide
Dynamic Range of the Optical Sampling Modules
• Remote Samplers or Compact Sampling Extender
Module Cables allowing the Sampler to be located
at the DUT
• Fully Calibrated Clock Recovery Solutions – No
need to manually calibrate for data pick-off losses
The PAM-4 analysis has full signal
path emulation tools that support
Continuous Time Linear Equalizer
(CTLE), channel emulators described
by S-parameters or TDR waveforms,
and receiver equalizers Feed Forward
(FFE) and Decision Feedback (DFE).
DSA8300 Series
With an industry-leading intrinsic jitter of less than 100 femtoseconds for
extremely accurate device characterization, the DSA8300 Series provides
comprehensive support for Optical Communications Standards, Time
Domain Relectometry and S-parameters. The DSA8300 Digital Sampling
Oscilloscope is a complete high-speed PHY Layer testing platform for
data communications from 155 Mb/sec to 100 Gb/sec.
Design characterization is supported
beyond 100GBASE-SR4 compliance
requirements for all measurements.
OPTICAL MODULES
CHANNELS
BANDWIDTH
CLOCK RECOVERY (MIN/MAX)
FILTER RATES SUPPORTED (MIN/MAX)
80C07B
1
2.5 GHz
155 Mb/s - 2.666 Gb/s
155 Mb/s - 2.5 Gb/s
80C08D
1
12.5 GHz
9.8 Gb/s - 12.6 Gb/s
9.953 Gb/s - 12.5 Gb/s
80C10C
1
80+ GHz
Provided by Opt. CRTP and CR286A
25.8 Gb/s - 43.018 Gb/s
80C11B
1
30 GHz
9.8 Gb/s - 12.6 Gb/s
9.953 - 12.5 Gb/s
80C12B
1
12 GHz
Provided by CR125A
155 Mb/s - 11.3 Gb/s
80C14
1
14 GHz
Provided by CR175A or CR286A
8.500 Gb/s - 14.025 Gb/s
80C15
1
32 GHz
Provided by CR286A
25.781 Gb/s - 28.05 Gb/s
TDR /
ELECTRICAL
MODULES
BANDWIDTH
TDR SYSTEM INCIDENT
RISE TIME (10%-90%)
TDR SYSTEM
REFLECTED RISE TIME
(10%-90%)
MONOLITHIC OR
REMOTE
16 bits
20 GHz
23 ps
28 ps
Monolithic
2
16 bits
30 GHz
18 ps
20 ps
Remote (2 meter)
2
16 bits
50 GHz
12 ps
15 ps
Remote (2 meter)
CHANNELS
VERTICAL
RESOLUTION
80E04
2
80E08B
80E10B
ELECTRICAL
MODULES
CHANNELS
VERTICAL
RESOLUTION
BANDWIDTH
RISE TIME (10%-90%)
MONOLITHIC OR
REMOTE
80E03
2
16 bits
20 GHz
17.5 ps
Monolithic
80E07B
2
16 bits
30 GHz
11.7 ps
Remote (2 meter)
80E09B
2
16 bits
60 GHz
5.8 ps
Remote (2 meter)
80E11
2
16 bits
70+ GHz
5 ps
Monolithic
80E11X1
1
16 bits
70+ GHz
5 ps
Monolithic
ACCESSORIES MODULES
DESCRIPTION
FUNCTIONALITY
82A04B
Phase Reference Module
<100 fs RMS timebase jitter
80A02
EOS/ESD Protection Module
EOS/ESD protection
80A03
Probe Adapter Module
Sampling Scope Probe Connectivity
80X01
1 Meter Extender Cable
Clock Recovery Phase Alignment
80X02
2 Meter Extender Cable
Position Module Close To DUT
80A08
Accessory Kit
Connection to DUT and CRU @ 25G
CR125A, CR175A, CR286A
Clock Recovery Instrument
Continues Clock Recovery, 150 Mb/s to 28.6 Gb/s
80A09
EOS/ESD Static Protection Device
26 GHz EOS/ESD Static Protection
TEK.COM/DSA8300 | 21
BASIC OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• Two channel instruments
• Extensive monitoring capability using TrendPlot™
testing
• Pass/Fail analysis with built in waveform limit
testing
• Automated data logging feature
• Up to 2 GS/s sample rate on all channels
• Dual-channel frequency counters
• Front-panel USB host port and rear-panel USB
device port
• TekSmartLab™ supported
TBS1000B Series
Use the TrendPlot™ function to
evaluate signal behavior over
extended time periods.
More features, more scope; the TBS1000B is in a class all on its own.
With up to 200 MHz bandwidth, 34 automated measurements, limit
testing, data logging, dual-channel frequency counters, waveform
trending and sample rates of up to 2 GS/s, the TBS1000B Series is
designed for extensive monitoring and analysis activities. It can handle
everyday test challenges without challenging your budget.
Thoroughly analyze your waveforms
with convenient math tools and 34
automated measurements.
MODELS
ANALOG CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
(PER CHANNEL)
TBS1032B*
2
30 MHz
500 MS/s
TBS1052B
2
50 MHz
1 GS/s
TBS1072B
2
70 MHz
1 GS/s
TBS1102B
2
100 MHz
2 GS/s
TBS1152B
2
150 MHz
2 GS/s
TBS1202B
2
200 MHz
2 GS/s
*Available only for North America and Europe.
RECOMMENDED PROBES
RECOMMENDED PROBES
Passive Voltage Probes
Current Probes
TPP0201
10X, 200 MHz, 300 V
CAT II
P6021A
TPP0101
10X, 100 MHz, 300 V
CAT II
60 MHz, 10.6 A
RMS/250 A Peak/10 mA
Min
P6022
TPP0051
10X, 50 MHz, 300 V
CAT II
120 MHz, 4 A RMS/100
A Peak/1 mA Min
A621
P2220
10X/1X, 200 MHz/6
MHz, 300 V CAT II/150
V CAT II
5 Hz to 50 kHz, 1000 A
RMS/2000 A Peak/10
mA Min
A622
100 kHz, 100 A DC/71 A
RMS/100 A Peak/10 mA
Min
High Voltage Probes
P5200A
500X/50X, 50 MHz,
± 1300 V/± 130 V
P5100A
100X, 500 MHz,
2500 V Peak
P6015A
1000X, 75 MHz,
20 kV Peak
ANOTHER PRODUCT FOR CONSIDERATION
Need an oscilloscope that simpliies the way you distribute
lab work to students? The TBS1000B-EDU models have
many of the same features and include integrated
courseware capabilities.
SHIPS WITH PRODUCT
• Two TPP0xx1 200 MHz, 100 MHz or 50 MHz Passive
Probes
• Certiicate of Calibration
• CD with Customer Documentation
• Installation & Safety Manual
RECOMMENDED ACCESSORIES
• Power Cord
TEKUSB-488
GPIB-to-USB converter
• 5-year Warranty
AC2100
Soft Carrying Case
LEARN WHY
a TBS1000B or TDS2000C
instrument can be your most
reliable and cost effective
scope with the “Reliability by
Design” Technical Brief.
22 | TEK.COM/TBS1000
BASIC OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• Two-channel instruments
• Integrated courseware feature—perform labs
directly on the oscilloscope
• Autoset enable/disable capability
• Included PC editor tool for easy lab creation
• Up to 2 GS/s sample rate on all channels
• Dual-channel frequency counters
• 34 automated measurements and FFT analysis
• TekSmartLab™ supported
The Courseware Resource Center is
an interactive, multi-lingual website
where educators can share lab
material and ideas.
TBS1000B-EDU Series
Meet the world’s irst dedicated teaching oscilloscope: the TBS1000B-EDU.
Not only does it deliver the performance you expect to see in a Tektronix
scope, it comes with an innovative course-ware feature that allows students
to review lab material, follow step-by-step instructions and document
results, all on the oscilloscope. We couldn’t make engineering easier,
so we made it easier to teach and learn.
The FFT function can show both
frequency and time domain
waveforms simultaneously.
MODELS
ANALOG CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
(PER CHANNEL)
TBS1052B-EDU
2
50 MHz
1 GS/s
TBS1072B-EDU
2
70 MHz
1 GS/s
TBS1102B-EDU
2
100 MHz
2 GS/s
TBS1152B-EDU
2
150 MHz
2 GS/s
TBS1202B-EDU
2
200 MHz
2 GS/s
RECOMMENDED PROBES
RECOMMENDED PROBES
Passive Voltage Probes
Current Probes
TPP0201
10X, 200 MHz, 300 V
CAT II
P6021A
TPP0101
10X, 100 MHz, 300 V
CAT II
60 MHz, 10.6 A
RMS/250 A Peak/10 mA
Min
P6022
TPP0051
10X, 50 MHz, 300 V
CAT II
120 MHz, 4 A RMS/100
A Peak/1 mA Min
A621
5 Hz to 50 kHz, 1000 A
RMS/2000 A Peak/10
mA Min
P2220
10X/1X, 200 MHz/6
MHz, 300 V CAT II/150
V CAT II
A622
High Voltage Probes
P5200A
500X/50X, 50 MHz,
± 1300 V/± 130 V
P5100A
100X, 500 MHz,
2500 V Peak
P6015A
1000X, 75 MHz,
20 kV Peak
100 kHz, 100 A DC/71 A
RMS/100 A Peak/10 mA
Min
ANOTHER PRODUCT FOR CONSIDERATION
Need more analysis features? The TBS1000B models offer
the same great performance and include Trendplot™, data
logging and limit test capability.
SHIPS WITH PRODUCT
• Two TPP0xx1 200 MHz, 100 MHz or 50 MHz, Passive
Probes
• Certiicate of Calibration
• CD with Customer Documentation
• Education CD with Course Editor SW and Lab Examples
RECOMMENDED ACCESSORIES
TEKUSB-488
GPIB-to-USB converter
AC2100
Soft Carrying Case
• Installation & Safety Manual
• Power Cord
• 5-year Warranty
HELP STUDENTS
master the use of
an oscilloscope with the included courseware
software and labs. Click here to learn more.
TEK.COM/TBS1000 | 23
BASIC OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• Four-channel instruments
• 1 GS/s sample rate on all channels
• 7-inch WVGA high-res display
• 16 automated measurements, and FFT analysis
• Built-in waveform limit testing
• Built-in help system and probe check wizard
• Front-panel USB host port and rear-panel USB
device port
• TekSmartLab™ supported
Accurately capture signals with at
least 10X oversampling on all
channels with Digital Real-Time
Sampling technology.
TBS1000 Series
Usually, entry-level instruments are as light in features as they are in
price. But Tektronix TBS1000 Series aren’t usual instruments. Ideal for
students, hobbyists or any person or organization on a tight budget,
TBS1000 Series oscilloscopes deliver outstanding performance,
including best-in-class digital real-time sampling, pass/fail testing, and
familiar, easy-to-use controls. All at a price that’s equally impressive.
MODELS
ANALOG CHANNELS
Quickly store and transfer your
waveforms and settings with the front
panel USB port.
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
(PER CHANNEL)
TBS1064
4
60 MHz
1 GS/s
TBS1104
4
100 MHz
1 GS/s
TBS1154
4
150 MHz
1 GS/s
RECOMMENDED PROBES
RECOMMENDED PROBES
Passive Voltage Probes
Current Probes
TPP0201
10X, 200 MHz, 300 V
CAT II
P6021A
TPP0101
10X, 100 MHz, 300 V
CAT II
60 MHz, 10.6 A
RMS/250 A Peak/10 mA
Min
P6022
P2220
10X/1X, 200 MHz/6 MHz,
300 V CAT II/150 V CAT II
120 MHz, 4 A RMS/100
A Peak/1 mA Min
A621
5 Hz to 50 kHz, 1000 A
RMS/2000 A Peak/10
mA Min
High Voltage Probes
P5200A
500X/50X, 50 MHz,
± 1300 V/± 130 V
P5100A
100X, 500 MHz,
2500 V Peak
P6015A
A622
100 kHz, 100 A DC/71 A
RMS/100 A Peak/10 mA
Min
TCP2020
50 MHz, 20 A DC/20 A
RMS/100 A Peak/10 mA
Min
1000X, 75 MHz,
20 kV Peak
ANOTHER PRODUCT FOR CONSIDERATION
Need a Lifetime Warranty? The TDS2000C Series offers the
same great performance as the TBS1000 and includes a
Lifetime Warranty.
SHIPS WITH PRODUCT
• Four TPP0x01 100 MHz or 200 MHz, 10X Passive Probes
• OpenChoice® Desktop Software
• Educator Classroom and Lab Resource CD
• Calibration Certiicate, Quick Reference Manual,
& Documentation on CD
• Power Cord
• 5-year Warranty
RECOMMENDED ACCESSORIES
1103
TEKPROBE Power
Supply
AC2100
Soft Carrying Case
LEARN HOW
to capture your signals accurately
with the “Be Sure to Capture the
Complete Picture” Technical Brief.
Be Sure to Capture the Complete Picture
Technical Brief
Tektronix Digital Real-time (DRT)
Sampling Technology
As an engineer or technician, you need the conidence and
trust that you’re accurately capturing the details of your signal.
If an oscilloscope’s sample rate isn’t fast enough, signal details
are lost, resulting in missing data and measurement errors.
The Solution…
Digital Real-time (DRT)
Sampling Technology
Input 1
Waveform Constructed
with Record Points
Sampling RateSampling Rate
24 | TEK.COM/TBS1000
Digital real-time oscilloscopes acquire signals in real time,
capturing enough samples of the signal needed to faithfully
reconstruct a waveform in a single acquisition cycle.
BASIC OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 9-inch WVGA display with 15 horizontal divisions
• Long 20M record length
• 32 automated measurements with gating
• TekVPI® Probe Interface allows you to use
latest-generation active voltage and current probes
A large, 9-inch display, with 15
horizontal divisions lets you see
more of your signal.
Select any of the 32 available
measurements from a single screen,
with helpful tips on each.
TBS2000 Series
When you see more signal, you ind anomalies faster. With an impressive
9-in. WVGA display and 15 horizontal divisions—the most in its class—
the TBS2000 not only helps you see the big picture, it gives you a clearer
picture. Plus a 20-million point record length lets you easily capture long
time windows. The TBS2000 also includes courseware support for
education labs.
MODELS
ANALOG CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
(PER CHANNEL)
TBS2072
2
70 MHz
1 GS/s
TBS2102
2
100 MHz
1 GS/s
TBS2074
4
70 MHz
1 GS/s
TBS2104
4
100 MHz
1 GS/s
RECOMMENDED PROBES
RECOMMENDED PROBES
Passive Voltage Probes
Current Probes
TPP0100
100 MHz, 10X Passive
Voltage Probe
TCP0020
P2221
1X/10X, 200 MHz
Passive Voltage Probe
TCP0030A
Differential Voltage Probes
TDP0500
50 MHz TekVPI®
20 Ampere AC/DC
current probe
120 MHz TekVPI
30 Ampere AC/DC
current probe
• TPP0100 100 MHz, 10x passive probe
(one per analog channel)
• Documentation CD
• Installation and safety manual
• Programmer manual, available on documentation CD
and on Tek Web
®
500 MHz TekVPI
differential voltage probe
with ±42 V differential
input voltage
TCP0150
20 MHz TekVPI
150 Ampere AC/DC
current probe
Hight Voltage Probes
P5100A
SHIPS WITH PRODUCT
±2.5 kV, 500 MHz,
100X high-voltage
passive probe
THDP0200
±1.5 kV 200 MHz
high-voltage
differential probe
THDP0100
±6 kV 100 MHz
high-voltage
differential probe
• Power Cord
• Calibration certiicate documenting traceability to
National Metrology Institute(s) and ISO9001 quality
system registration
RECOMMENDED ACCESSORIES
TPA-BNC
TekVPI to TekProbe®
BNC adapter
ACD2000
Soft transit case, for
TBS2072 and TBS2102
ACD4000
Soft transit case, for
TBS2074 and TBS2104
TEK-USBWIFI
USB Wi-Fi 2 dongle for
TBS2000 series only
26 | TEK.COM/OSCILLOSCOPE/TBS2000-BASIC-OSCILLOSCOPE
LEARN MORE with "The Anatomy
of Digital Oscilloscopes" poster that shows many
of the hundreds of parts that work together in an
oscilloscope to make sure you see the real signal.
It includes a block diagram of a scope's signal path
to show you what happens between the signal input
and the display.
BATTERY POWERED AND HANDHELD OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 4 fully isolated and loating channels
• 21 automated measurements
• 600 VRMS CAT III, 1000 VRMS CAT II rated inputs
• Measurement data logging with Trendplot™ testing
• 7 hours of continuous battery operation
Four isolated input channels easily
handle any type of mixed signal
inputs.
User-deined limit testing can
automatically monitor your signals
and output Pass or Fail results.
THS3000 Series
Affordable performance in a rugged, portable design. This handheld,
battery-powered oscilloscope is packed with features and analysis tools.
With up to 5 GS/s sampling rate and four isolated channels that can
measure up to 1000 Volts, you can quickly, reliably and accurately
evaluate your signal characteristics on the bench or in the ield.
MODELS
ANALOG CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
THS3014
4
100 MHz
2.5 GS/s
THS3014-TK
4
100 MHz
2.5 GS/s
THS3024
4
200 MHz
5 GS/s
THS3024-TK
4
200 MHz
5 GS/s
RECOMMENDED PROBES
RECOMMENDED ACCESSORIES
Passive Voltage Probes
THSBAT
THP0301
- Y/B/M/G
Additional Spare
Battery
THSCHG*2
Battery Charger
119-7900-XX
AC Power Adapter
300 MHz, 10X,
300 V CAT III
High Voltage Probes
P5150*1
50X, 500 MHz, 2500 V
Peak, 1000 V RMS CAT II
P5122
100X, 200 MHz,
1000 V RMS CAT II
Current Probes
P6021A
60 MHz, 10.6 A
RMS/250 A Peak/10 mA
Min
P6022
120 MHz, 4 A RMS/100
A Peak/1 mA Min
A621
5 Hz to 50 kHz, 1000 A
RMS/2000 A Peak/10
mA Min
A622
100 kHz, 100 A DC/71 A
RMS/100 A Peak/10 mA
Min
TCP2020
50 MHz, 20 A DC/20 A
RMS/100 A Peak/10 mA
Min
*1 The P5150 is compatible with THS oscilloscopes, but
50X vertical scaling is not offered.
ANOTHER PRODUCT FOR CONSIDERATION
For very accurate ripple measurements on high voltage
signals, the P5122 probe offers high impedance with minimal
capacitive loading.
SHIPS WITH PRODUCT
RECOMMENDED SERVICE
SILV400
5-year Extended
Warranty
*2 Does not include AC power adapter.
• Four THP0301-Y/B/M/G 300 V CAT III, 300 MHz 10X
Passive Probes
•
•
•
•
•
•
•
•
•
OpenChoice® Desktop Software
USB-A to Mini USB-B Cable for PC Communication
Lithium-ion Battery with 7 Hour Battery Life
Calibration Certiicate, Installation/Safety Manual,
Documentation on CD
Carrying Handle, Hanging Strap
ACHHS Soft-sided Carry Case*3, AC Power Adapter
with Power Cord
Hard-sided Travel Case*4
Soft-sided Probe Case, Two Probe Replacement
Accessory Kits*4
3-year Warranty
*3 Non-TK models only
*4 TK models only
LEARN MORE
with the “Fundamentals
of Floating Measurements
and Isolated Input
Oscilloscopes”
Application Note.
Fundamentals of Floating Measurements
and Isolated Input Oscilloscopes
Application Note
This guide will provide you with a fundamental glossary of
power measurement terms, explain the different options
available for making floating measurements, and highlight the
advantages and trade-offs of each option.
The most demanding floating measurement requirements are
found in power control circuits, such as motor controllers,
uninterruptible power supplies, and industrial equipment. In
such application areas, voltages and currents may be large
enough to present a hazard to users and/or test equipment.
When measuring floating high voltage signals there are many
options to consider. Each option has its advantages and
trade-offs.
TEK.COM/THS3000 | 27
BATTERY POWERED AND HANDHELD OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 10X oversampling on all channels
• 4 isolated analog channels
• 11 automated measurements and FFT analysis
• Optional power analysis software
Safely and easily make loating
measurements with the four isolated
channels.
Battery pack gives you up to 4 hours
of portable operation. Hot-swap the
pack for 4 more hours!
TPS2000B Series
Great performance goes beyond the lab. Make loating or differential
measurements with up to four isolated channels. Tackle challenging
environments with backlit buttons and optional power analysis
software. Capture signals with Digital Real-Time Sampling.
MODELS
ANALOG CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
TPS2012B
2
100 MHz
1 GS/s
TPS2014B
4
100 MHz
1 GS/s
TPS2024B
4
200 MHz
2 GS/s
APPLICATION MODULES
RECOMMENDED PROBES
TPS2PBND2
Passive Voltage Probes
TPS2PWR1
TPS2PWR1 Module
and Four P5122
Probes
Power Measurement
and Analysis Module
TPP0201
10X, 200 MHz, 300 V
CAT II
For very accurate power measurements, the PA1000 Power
Analyzer offers 0.05% basic accuracy.
TPP0101
10X, 100 MHz, 300 V
CAT II
SHIPS WITH PRODUCT
P2220
10X/1X, 200 MHz/6
MHz, 300 V CAT II/150
V CAT II
• One TPP0101 100 MHz, 10X Passive Probe Per Analog
Channel (TPS2012B & TPS2014B)
RECOMMENDED ACCESSORIES
1103
TEKPROBE Power
Supply
High Voltage Probes
AC2100
Soft Carrying Case
P5150
TPSBAT
Additional Lithium-Ion
Battery Pack (one
included standard
with instrument)
P5122
TPSCHG
External Battery
Charger
RECOMMENDED SERVICE
SILV200
5-year Extended
Warranty
50X, 500 MHz, 2500 V
Peak, 1000 V RMS CAT
II
100X, 200 MHz,
1000 V RMS CAT II
Current Probes
P6021A
60 MHz, 10.6 A
RMS/250 A Peak/10 mA
Min
P6022
120 MHz, 4 A RMS/100
A Peak/1 mA Min
A621
5 Hz to 50 kHz, 1000 A
RMS/2000 A Peak/10
mA Min
A622
100 kHz, 100 A DC/71 A
RMS/100 A Peak/10 mA
Min
TCP2020
28 | TEK.COM/TPS2000
ANOTHER PRODUCT FOR CONSIDERATION
50 MHz, 20 A DC/20 A
RMS/100 A Peak/10 mA
Min
• One TPP0201 200 MHz, 10X Passive Probe Per Analog
Channel (TPS2024B)
• OpenChoice® Desktop Software
• RS-232 to USB Adapter Cable
• One Lithium-Ion Battery with 4-hour Battery Life
• Calibration Certiicate, Quick Reference Manual,
& Documentation on CD
• Front Panel Cover, AC Adapter with Power Cord
• 3-year Warranty
LEARN MORE
with the “Fundamentals
of Floating Measurements and
Isolated Input Oscilloscopes”
Application Note.
Fundamentals of Floating Measurements
and Isolated Input Oscilloscopes
Application Note
This guide will provide you with a fundamental glossary of
power measurement terms, explain the different options
available for making floating measurements, and highlight the
advantages and trade-offs of each option.
The most demanding floating measurement requirements are
found in power control circuits, such as motor controllers,
uninterruptible power supplies, and industrial equipment. In
such application areas, voltages and currents may be large
enough to present a hazard to users and/or test equipment.
When measuring floating high voltage signals there are many
options to consider. Each option has its advantages and
trade-offs.
TDS SERIES OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 10X oversampling on all channels
• Bright color display
• 16 automated measurements and FFT analysis
• Built-in help system and probe check wizard
• Front-panel USB host port and rear-panel USB
device port
• Lifetime Warranty*1
• TekSmartLab™ supported
Accurately capture signals with at
least 10X over-sampling on all
channels with Digital Real-Time
Sampling technology.
TDS2000C Series
Big performance has never been so small. Featuring Digital Real-Time
Sampling, you can trust your scope to accurately capture your signal.
Add in USB connectivity, 16 automated measurements and even a
built-in help system; this compact oscilloscope helps you get more
done in less time. It’s true: big things do come in small packages.
MODELS
ANALOG CHANNELS
Easily check if your waveforms pass
or fail your speciications with built-in
waveform limit testing.
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
TDS2001C
2
50 MHz
500 MS/s
TDS2002C
2
70 MHz
1 GS/s
TDS2004C
4
70 MHz
1 GS/s
TDS2012C
2
100 MHz
2 GS/s
TDS2014C
4
100 MHz
2 GS/s
TDS2022C
2
200 MHz
2 GS/s
TDS2024C
4
200 MHz
2 GS/s
RECOMMENDED PROBES
RECOMMENDED PROBES
Current Probes
Passive Voltage Probes
P6021A
60 MHz, 10.6 A
RMS/250 A Peak/10 mA
Min
TPP0201
10X, 200 MHz, 300 V
CAT II
TPP0101
P6022
120 MHz, 4 A RMS/100
A Peak/1 mA Min
10X, 100 MHz, 300 V
CAT II
P2220
A621
5 Hz to 50 kHz, 1000 A
RMS/2000 A Peak/10
mA Min
10X/1X, 200 MHz/6
MHz, 300 V CAT II/150
V CAT II
A622
100 kHz, 100 A DC/71 A
RMS/100 A Peak/10 mA
Min
TCP2020
50 MHz, 20 A DC/20 A
RMS/100 A Peak/10 mA
Min
TDS2000 SERIES
The TDS2000 Series is one of the most popular
oscilloscopes of all time. It has a proven track record and
comes with a lifetime warranty. We are pleased to continue
to offer it.
For new applications, make sure you learn about:
MSO/DPO2000B Series Oscilloscopes
• 70, 100 and 200 MHz models
High Voltage Probes
• 2 or 4 analog channels
P5200A
500X/50X, 50 MHz,
± 1300 V/± 130 V
• 16 digital channels (MSO models)
P5100A
100X, 500 MHz,
2500 V Peak
P6015A
1000X, 75 MHz,
20 kV Peak
• 1 Mpoint record length
• Serial bus decoding and triggering options
• 5-year warranty
RECOMMENDED ACCESSORIES
SHIPS WITH PRODUCT
1103
TEKPROBE Power
Supply
• One TPP0x01 100 MHz or 200 MHz, 10X Passive Probe
Per Analog Channel
AC2100
Soft Carrying Case
• OpenChoice® Desktop Software
• Calibration Certiicate, Quick Reference Manual &
Documentation on CD
• Power Cord
• Lifetime Warranty*1
*1 For complete details visit www.tektronix.com/lifetimewarranty
TEK.COM/TDS2000 | 29
TDS SERIES OSCILLOSCOPES
PRODUCT HIGHLIGHTS
• 10 kpoints record length on all channels, all the
time
• 3,600 wfm/s max. waveform capture rate with DPO
technology
• 25 automated measurements and FFT analysis
• Front-panel USB host port and optional rear-panel
Ethernet, GPIB, and RS-232 ports
Optional battery pack gives you up to
3 hours of portable operation.
TDS3000C Series
Accurately capture signals with at
least 5X over-sampling on all
channels with Digital Real-Time
Sampling technology.
Performance meets portability. Featuring up to 500 MHz bandwidth and
optional battery-powered operation, this oscilloscope is as capable as it
is convenient. Capture fast-changing signals with Digital Real-Time
Sampling. Maximize eficiency with WaveAlert® Anomaly Detection and
25 automated measurements. Performance and versatility—turns out you
can take it with you.
MODELS
ANALOG CHANNELS
ANALOG BANDWIDTH
ANALOG SAMPLE RATE
TDS3012C
2
100 MHz
1.25 GS/s
TDS3014C
4
100 MHz
1.25 GS/s
TDS3032C
2
300 MHz
2.5 GS/s
TDS3034C
4
300 MHz
2.5 GS/s
TDS3052C
2
500 MHz
5 GS/s
TDS3054C
4
500 MHz
5 GS/s
APPLICATION MODULES
RECOMMENDED PROBES
TDS3LIM
Limit Testing
Passive Voltage Probes
TDS3TMT
Telecom Mask Test
Triggering
P6139B
TDS3VID
HDTV and Custom
Video Triggering
Active Voltage Probes
RECOMMENDED ACCESSORIES
1103
TDS3GV
TDS3BATC
TEKPROBE Power
Supply
GPIB, RS-232, and VGA
Communications
Module
Battery Charger
AC3000
Soft Carrying Case
HCTEK4321 Hard Carrying Case
(requires AC3000)
RECOMMENDED SERVICE
5-year Extended
Warranty
10X, 1 GHz, ± 8 V
The TDS3000C Series performs reliably in test stations
around the world. It is also available with a battery pack,
making it especially well-suited for ield applications that
require high bandwidth.
Differential Voltage Probes
For new applications, make sure you learn about:
MDO3000 Series Mixed Domain Oscilloscopes
P6246*1
• 100, 200, 350, 500 MHz, and 1 GHz models
10X/1X, 400 MHz,
± 8.5 V/± 850 mV
High Voltage Probes
P5205A
500X/50X, 100 MHz,
± 1300 V/± 130 V
P5210A
1000X/100X, 50 MHz,
± 5600 V/± 560 V
P5100A
100X, 500 MHz,
2500 V Peak
Lithium-ion Battery
TDS3ION
SILV400
P6243
10X, 500 MHz, 300 V
CAT II
TDS3000 SERIES
• 2 or 4 analog channels
• 16 digital channels (optional)
• 10 Mpoint record length
• Integrated arbitrary/function generator (optional)
• Serial bus decoding and triggering options
SHIPS WITH PRODUCT
Current Voltage Probes
TCP202A
50 MHz, 15 A DC/10.6
A RMS/50 A Peak/10
mA Min
*1 Requires 1103 TEKPROBE Power Supply
• One P6139B 500 MHz, 10X Passive Probe Per Analog
Channel
• OpenChoice® Desktop Software
• Calibration Certiicate, Quick Reference Manual,
& Documentation on CD
• Front Panel Cover, Power Cord
• 3-year Warranty
30 | TEK.COM/TDS3000
OSCILLOSCOPE APPLICATION SOFTWARE
OSCILLOSCOPE APPLICATION SOFTWARE
The newest wireless, embedded systems technologies, serial data and video designs present you with
unprecedented measurement challenges. Our standards expertise and measurement tools help you meet
them all. You can shorten your design cycle, gain greater technical insight and improve team productivity
to bring new products and services to market much faster.
Advanced Analysis Applications
Compliance and Debug Applications
Jitter, Eye Diagram, Timing and Noise Analysis
• DPOJET provides a comprehensive set of timing,
amplitude, jitter and noise measurements with
integrated clock recovery, reporting and plotting
capability to quickly analyze and root cause issues
related to next generation designs.
TekExpress Automation software provides automated
instrument setup, multi-instrument control, test execution,
and reporting to characterize Transmitter/Receiver
performance and easily verify designs comply with the
latest High Speed Serial Standards. Additionally, standard
speciic DPOJet software allows the user to seamlessly
debug designs in the event of compliance failure.
Serial Data Link Analysis
• SDLA Visualizer provides channel de-embed,
emulation, reference equalizers and IBI-ABI model
support to enable characterization, performance
and what-if analysis of next generation high
speed designs.
A sample of the supported technologies are:
Computer Peripherals
Display
• PCI Express
• HDMI
Vector Signal Analysis
• USB
• MHL
• SignalVu allows users to characterize wideband
spectral events, demodulate the signal and verify
designs such as wideband radar, high datarate
satellite links and frequency hopping radios,
WLAN, WiGig or Bluetooth devices
• Thunderbolt
• DisplayPort
Storage
Data Communications
• SATA
• 10/100/1000 BaseT
• SAS
• 10G BaseT
Power Analysis
• DPOPWR provides automated measurements for
analyzing power quality, current harmonics,
switching loss, slew rate, modulation and ripple
Mobile
• SFP+
• MIPI M-PHY
• 10GKR
• MIPI D-PHY
• 16G FibreChannel
• MIPI C-PHY
• 100G/400G
SignalCorrect
• SignalCorrect allows quick characterization and
de-embed of the cables, ixtures and other types of
interconnects using the DPO/MSO70000 series of
oscilloscopes enabling signal margin recovery
leading to more accurate measurements.
• QSFP
DDR Memory Bus Analysis
• DDRA provides a comprehensive validation and
debug suite for most DDR versions, speeding the
resolution of complex memory signaling issues
Visual Trigger
• Precisely qualify triggers and ind unique events in
complex waveforms
Protocol Decode and Triggering
• Observe speciic system behavior to isolate speciic
states or locate invalid bus sequences
• Automotive
• Wi-Fi
TEK.COM/SOFTWARE-1 | 31
OSCILLOSCOPE APPLICATION SOFTWARE
Jitter/Noise Analysis
Solving Jitter Debug and Analysis
Challenges Made Easy
Tektronix offers 3 different platforms to root
cause and debug Jitter related issues on next
generation high speed interfaces.
The DPO/MSO70000 Series of Real-Time
Oscilloscopes with DPOJET software offer a
complete suite of timing, amplitude, jitter and
noise measurement with integrated clock
recovery, powerful plotting capability and
reporting capability on a lexible platform
enabling debug and validation of multi-gigabit
interfaces.
The DSA8300 Series of sampling
oscilloscopes with 80SJNB Jitter, Noise and
BER analysis software offers separation of
both jitter and noise provides highly accurate
extrapolation of BER and eye contour.
The BSX Series BERTScope JMAP option
offers BER-based jitter separation, including
deterministic jitter decomposition and long
pattern support, for data rates up to
32 Gbits/sec.
For solving jitter problems on low level and
low noise signals or for measuring the very
small amounts of jitter often found on clocks,
Tektronix offers Real-Time Spectrum
Analyzers (RTSA) that enable engineers to
measure and characterize jitter over a wide
dynamic range.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MSO/DPO70000, DPO7000, MSO/DPO5000
Series Real-time Oscilloscopes
• DPOJET Jitter, Timing and Eye Diagram and
Analysis software
• DSA8300 Sampling Oscilloscopes
• 80SJNB Jitter, Noise and BER Analysis software
• IConnect® and MeasureXtractor™ Signal Integrity
TDR and S-parameter software
Bit Error Rate Analyzers:
• BSX Series BERTScope
• CR Series Clock Recovery Modules
Probing:
• P7313/P7313SMA Differential Probes
• P7500 TriMode Probes
Real-Time Spectrum Analyzers:
• RSA5000 Series
For more information visit: tek.com/jitter
32 | TEK.COM/SOFTWARE-1
Signal Integrity, Time
Domain Relectometry
(TDR) and S-parameter
Measurements
Improve Connector and Channel Visibility
Signal integrity measurements are a critical
step in the process of developing digital
systems. The task of isolating and eliminating
signal integrity problems anywhere in the
system is challenging. These solutions let you
quickly locate and trace faults back to their
source, eliminating schedule delays and
reliability issues.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• DSA8300 Sampling Oscilloscope
- True-differential TDR up to 50 GHz bandwidth
- 15 ps relected rise time and 12 ps incident
rise time
- Up to 4 dual-channel TDR modules for
fast, accurate multi-lane impedance and
S-parameter characterization
• IConnect® advanced and MeasureXtractor™
• Signal Integrity TDR and S-parameter software
• 80SJNB Jitter, Noise and BER Analysis software
Probing:
• P8018 Single Ended/P80318 Differential Hand-Held
TDR Probes
For more information visit: tek.com/signal_integrity
SignalCorrect
SignalCorrect software with the TCS70902
step generator offers quick characterization
capability of cables, ixtures and other
connectors on a DPO/MSO70000 series of
real-time oscilloscopes and automatically
remove their effects to gain margin and
reduce failures or costly over design.
The step by step characterization process
driven by a wizard like user interface enables
even novice users to quickly and easily perform
the characterization in a repeatable manner.
RECOMMENDED PRODUCTS:
•
•
•
•
•
DPO/MSO70000 Series Real-Time Oscilloscopes
Opt SC SignalCorrect Software
TCS70902 Calibration Source
Opt 292 Kit
Opt 240 Kit
For more information visit:
www.tek.com/datasheet/signalcorrect%E2%84%A2-software-and-tcs70902-calibration-source-datasheet
Serial Data Link
Analysis Solutions
Unmatched Visibility for Greater
Insight into Your Design
Tektronix offers serial data link analysis
solutions for high speed serial and memory
interfaces for both real-time and sampling
oscilloscopes. Relections, loss, and
cross-coupling resulting from the
measurement setup can be accurately
removed from the acquired signal using Serial
Data Link Analysis (SDLA) Visualizer. SDLA
Visualizer also provides the functionality to
model transmitter equalization, embed
channel models, and apply receiver
equalization to open closed eyes. Jitter and
Eye measurements can be taken at any point
in the measurement or simulated link using
DPOJET Jitter and Eye Analysis software.
SDLA Visualizer and DPOJET are Tektronix’
advanced analysis solutions for MSO/
DPO70000 Series real-time oscilloscopes.
For those applications that require a sampling
scope, Tektronix offers the DSA8300
sampling oscilloscope with 80SJNB Jitter,
Noise, and BER analysis software. 80SJNB
provides the capability to specify a de-embed
ilter, Time Domain Waveform or S-Parameter
for channel de-embedding and DFE/FFE
Equalization. 80SJNB analysis software also
performs timing and noise-based analysis to
get a 3-D view of the eye diagram performance
for deep, accurate evaluation on signals with
speeds up to and beyond 50 GHz.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MSO/DPO70000 Series Real-time Oscilloscopes
• SDLA Visualizer
• DPOJET Jitter and Eye Diagram Analysis Tools
• DSA8300 Sampling Oscilloscopes
• 80SJNB Jitter, Noise and BER Analysis software
For more information visit: tek.com/sdla
OSCILLOSCOPE APPLICATION SOFTWARE
PCI Express®
Serial ATA/SAS
USB and Type-C
PCI Express Design Challenges
Need Fast, Accurate Answers
Powerful Serial ATA/SAS Automated
Compliance Toolset Saves Time and Effort
Flexible Tools for Compliance and
Debug of USB Hosts and Peripherals
PCI Express testing requires dual-port
acquisition and million unit interval analysis.
Tektronix oscilloscopes provide full sample
rate and deep record length on all channels
required for compliance testing and debug. The
MSO/DPO70000 features channel emulation,
equalization and up to 70 GHz Bandwidth,
which enables accurate measurements on 4th
generation data rates up to 16 Gb/s.
Serial ATA/SAS test requirements are some
of the most complex among current serial
data standards. With a full toolset for
characterization you will know how much
margin your design really has.
Tektronix USB software solutions meet the
electrical validation, compliance, characterization
and debug needs of engineers designing
USB 3.1 Type-C, USB 3.1, and USB 2.0
based systems, which are compliant to the
USB-IF test standards. USB-PD electrical
parametric and protocol measurements and
serial decoding solutions are also available.
Quickly ind the root cause of issues when
testing SuperSpeed USB 3.1 Type-C designs
with the combination of full SigTest support
and DPOJET.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MSO/DPO70000C/DX/SX Series Real-Time
Oscilloscopes
• Opt PCE4 Automated Compliance & Debug
Software for PCle Gen 1/2/3/4
• Opt PCE Debug Software for PCIe1/2
• Opt DJA Advanced eye diagram, jitter and
timing analysis
• Opt DJAN Advanced DPOJet noise analysis
• Opt SDLA64 Serial Data Link Analysis
• Signal Correct™ software and TCS70902
calibration source
• IConnect® S-parameters and Z-Line
software 80SSPAR
Probing:
• P7300SMA Series SMA Differential Probing System
• P7300, P7500, P7600, and P7700 Series TriMode
Differential Probes and Remote Probe Heads
• P80318 TDR hand Probes
• Midbus and Solder Down Probes
Bit Error Rate Analyzers:
• BSX240, BSXPCIBSE, BSXPCI4CEM SW
• CR125/CR175/CR286
Tektronix’ one-button SATA solution for
device state control and test automation
allows you to focus your attention on other
priorities. SAS characterization and
conformance testing requires voltage,
equalization, and jitter analysis across
multiple data rates and operating conditions.
Tektronix’ SAS test solution provides powerful
design insight with end to end link analysis
including ISI and crosstalk effects.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MDO3000 Series
RECOMMENDED PRODUCTS:
• MDO4000C Series
Oscilloscopes and Application Software:
• MSO/DPO5000 Series
• MSO/DPO70000 Series Real-Time Oscilloscopes
• DPO7000C Series
• TekExpress SATA/SAS Compliance Automation
software
• MSO/DPO70000 Series Real-Time Oscilloscopes
• DPOJET Jitter and Eye Analysis software
• TekExpress USB Compliance Automation
Software
Signal Generators:
• DPOJET Jitter and Eye Analysis Software
• AWG70000 Series Arbitrary Waveform
Generators
Signal Generators:
Bit Error Rate Analyzers:
• BSX240
For more information visit:
tek.com/technology/sata-sas
• AWG7000 Series Arbitrary Waveform Generators
Bit Error Rate Analyzers:
• BSA125C, DPP125C, CR125A
For more information visit: tek.com/usb
For more information visit:
tek.com/pci_express
TEK.COM/SOFTWARE-1 | 33
OSCILLOSCOPE APPLICATION SOFTWARE
HDMI, MHL and DisplayPort
Memory
MIPI®
Complete HDMI, DisplayPort and MHL
Transmitter, Receiver and Protocol
Test Solutions
Comprehensive Tools for Memory
Interface Verification and Debug
Complete MIPI D-PHY, C-PHY and
M-PHY Transmitter, Receiver and Protocol
Test Solutions
Tektronix provides comprehensive TX and
RX test solutions for Display solutions. For
DisplayPort, the DPOJET based DisplayPort
Essentials package helps engineers to
characterize their devices and stress their
devices to the maximum potential, leading
to margin speciications for their chips. The
TekExpress based solution provides a python
based fully automated conformance testing
solution reducing test times and helping
companies claim conformance and go to
markets quicker. For HDMI and MHL, Tektronix
offers complete automated testing conforming
to the latest standards (HDMI 2.0 and MHL 3.3).
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MSO/DPO70000 Series Real-Time Oscilloscopes
DisplayPort and Embedded DisplayPort Software:
• Opt. DP12, Opt. DP13, Opt. EDP14,
Opt. TEK-GRL-DP-SINKSW
HDMI Software:
• Opt. HT3, Opt. HT3DS, Opt. HDM, Opt. HDM-DS,
Opt. HDM-DSM
MHL Software:
• Opt.MHD, Opt.MHD3
Display Protocol Analysis Software:
• Opt. TEK-PGY-HDMI, Opt. TEK-GRL-DP-DEC,
Opt. TEK-GRL-DP-AUX-DEC
Probing:
• P7313SMA for HDMI , MHL and DisplayPort
• P7240 for MHL clock
• P7313SMA for solder-in probing for RBR/HBR/
HBR2 DisplayPort signals
Signal Generators:
• AWG70000 Series Arbitrary Waveform
Generators for HDMI
• BERTSCOPE BSX Series for DisplayPort
Test Fixtures:
• HDMI:
- TEK-HDMIA2-TPA-PRRT
• DisplayPort Type-C:
- TEK-DPC-TPA-PRCB
For more information visit:
HDMI: tek.com/technology/hdmi-dvi
MHL: tek.com/technology/mhl
DisplayPort: tek.com/technology/displayport
Each new generation of memory technology
brings in higher speeds, lower I/O voltage
for reduced power consumption, and form
factors for different applications. These factors
result in debug and validation challenges as
new, more complex tests are required to
validate and debug devices operating with
tighter margins, faster edge rates, and more
complex bus protocols.
The sophisticated triggering and analysis
packages on the DPO Series oscilloscopes
provide broad coverage by supporting
veriication of multiple memory standards with
each package. Standards supported include
DDR, DDR2, DDR3, DDR3l, DDR4, LPDDR,
LPDDR2, LPDDR3, LPDDR4, LPDDR4x
and GDDRx.
The TLA7000 Series logic analyzers with their
20ps high speed timing combined with analog
mux and various types of protocol views
enable logic debug and protocol validation
of memory interfaces.
Easy signal access is provided by a wide
variety of probing solutions that support
various memory standards and package
types with minimal signal loading.
RECOMMENDED PRODUCTS:
Logic Analyzers:
•
•
•
•
TLA7000 Series
TLA7BB4 Logic Analyzer Module
Memory Support Package
Memory Compliance Software
Oscilloscopes:
• MSO/DPO5000, DPO7000C, MSO/DPO70000
Series Real-Time Oscilloscope
• Visual Trigger Option (Opt. VET)
• DDR Analysis Option (Opt. DDRA)
• LPDDR4/LPDDR4x Analysis Option
(Opt. DDR-LP4)
• DPOJET Jitter and Eye Diagram Analysis Tool
• SDLA Serial Data Link Analysis ToolKit
• ONFI Electrical Timing Analysis
(Option TEK-PGY-ONFI)
• eMMC Electrical and Protocol Analysis
(PGY-MMC-SD-SDIO)
Probing Solutions:
• P7700 TriMode Differential Probes
• P7500 TriMode Differential Probes
• P6780 Differential Logic Probes
• Oscilloscope and Logic Analyzer Interposers for
standard BGA and PoP packages, DIMM’s and
SODIMM’s for all popular memory standards
For more information visit: tek.com/memory
34 | TEK.COM/SOFTWARE-1
Tektronix provides comprehensive TX & RX test
solutions for MIPI D-PHY v1.2, C-PHY v1.1 and
M-PHY v3.1. Tektronix provides the TekXpress
based automated compliance solution and
DPOJET based Essentials package for
Transmitter test. The TekExpress based
solution provides a python based fully
automated conformance testing solution,
reducing test times and helping companies
claim conformance and go to markets quicker.
The DPOJET based solution helps engineers
to characterize their devices, perform Root
Cause Analysis of Failures and stress their
devices to the maximum potential, leading
to margin speciications for their chips.
Tektronix launched a new AWG based D-PHY
and C-PHY Receiver test solution for
compliance and Margin testing with 100%
coverage for Rx test as per CTS.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MSO/DPO70000 Series Real-Time Oscilloscopes
M-PHY Software:
• Opt.M-PHYTX, Opt.M-PHY, PGY-LLI, PGY-UPRO
C-PHY Software: Opt.C-PHY
D-PHY Software:
• Opt.TEKEXP D-PHYTX, Opt.SR-DPHY
Probing:
• P7300 Series TriMode Differential Probes
• P7600 Series of Low Noise Probes for M-PHY
• P7700 Series TriMode Differential Probes
• TMPC-CTB Termination Board
AWG and Application Software:
• AWG70000A Arbitrary Waveform Generators
for D-PHY and C-PHY Receiver PHY testing
• BERTScope for M-PHY RX testing
M-PHY Software: Opt. M-PHYRX
D-PHY Software: Opt. DPHYNL-SSV1
C-PHY Software: Opt. CPHYNL-SSV1
• P344: D-PHY Generator
• D-PHY Decoder HS: D-PHY Decoder
• P339: D-PHY Generator
• Oscilloscope based Protocol Decode: TMPCCPHYVIEW, PGY-DGRF, PGY-HIS, PGY-I3C-PD,
PGY-LLI, PGY-RFFE, PGY-SSIC, PGY-UFS,
PGY-UPRO
For more information visit: tek.com/mipi
OSCILLOSCOPE APPLICATION SOFTWARE
Data Communications
Tektronix offers comprehensive, integrated
tool sets for validating the physical layer
of IEEE 802.3 Ethernet devices, and for
developing and debugging Ethernet-based
systems from 10BASE-T up to 400Gbps.
Tektronix also provides comprehensive
Compliance and Debug solutions for
technologies that don’t fall into IEEE
brackets such as SFF 8431, SFP+,
OIF-CEI, IniniBand and FC-16G.
RECOMMENDED PRODUCTS:
Software Solution:
• DPOJET PAM4 - Comprehensive PAM4
Analysis Tools
• 100G-TXE - IEEE 802.3 KR4/CR4/CAUI-4
Compliance Tools
• SR-ENET – Ethernet Decoding and Analysis
• TDSET3 – 10/100/1000BASE-T Ethernet
Compliance Testing
• DPO4ENET – Ethernet Triggering and Analysis
• 2.5G/5G/10GBASE-T Automated
Compliance Software
• SFP-TX & SFP-WDP - Compliance
and Debug solution for SFF 8431 SFP+
• 10G-KR - 10GBASE-KR/KR4 Compliance,
Debug & Decode Solution
• FC-16G – Compliance and Debug solution for
FC-PI-5 Clause 9 Electrical Physical Layer Testing
• DPOJET Jitter and Eye Diagram Analysis Tool
• SDLA Serial Data Link Analysis ToolKit
Oscilloscopes:
• DPO70000SX Series
• MSO/DPO70000 Series Real-Time Oscilloscopes
100G/400G Rx/Tx
Technology/ Application
Solutions
Optical Testing
IEEE802.3BJ,BM,BS, 32GFIBRE
CHANNEL AND OIF/VSR STANDARDS
The DSA8300 with its highly conigurable
mainframe and a wide variety of optical
modules provide complete optical test
solutions with superior system idelity from
125 Mb/s to 100 Gb/s and beyond. The
modules cover a range of wavelengths for
both single- and multi-mode ibers. Each
module can be optionally conigured with
a number of selectable Optical Reference
Receiver (ORR) ilters or a full bandwidth path.
• High precision jitter characterization and impaired
receiver stimulus system.
• The Tektronix 70kSX Real-time instrument portfolio is
now supported in 100G and 400G testing.
• The PAM4 analysis solution offers full featured 400G
measurement support of emerging OIF-CEI and IEEE
Datacom standards.
• The DSA8300’s exceptionally high dynamic range
makes it well-suited for PAM4 and Transmitter
Distortion Eye Closure (TDEC) based measurements
on both electrical and optical based signals.
• DSA8300, CEI-VSR lets you easily automate
measurements for CEI-28G-VSR testing. With a
simple measurement setup, you can perform all the
measurements with a single button click.
• DSA8300, 80SSR4 offers fully automated 802.3BM
based SR4 Optical test automation, where all optical
measurements can be performed without intimate
knowledge of the optical speciications and with easy
to reproduce results.
• The BSA286CL and PatternPro PPG/PED320x have
similarly low jitter noise loor speciications, which
make it invaluable to generate stressed eyes and
performing Bit Error Ratio analysis on single or
multi-channel applications.
NRZ CHIP-TO-CHIP AND SILICON
CHARACTERIZATION (ELECTRICAL)
• Requires stimulus and impairment capabilities as well
as high bandwidth (70+GHz), ultra-low jitter (<100 fs)
electrical / TDR acquisition and reference receivers,
eye diagram mask testing, precision jitter and noise
analysis.
Tools and Analysis Software for Testing
the Latest Short-Haul and Long-Haul
Optical Standards and Technologies
The ever-increasing demand for long-haul
network bandwidth has driven network
operators from the on-off keying used with
today’s 10G infrastructure to coherent optical
modulation that can support 40G, 100G,
400G, and beyond. Coherent modulation
is often achieved using formats such as
DP-QPSK and 16QAM. Tektronix has
hardware and analysis software to allow
receiver, transmitter, and system manufacturers
to design and debug their next generation
long-haul products.
RECOMMENDED PRODUCTS:
Oscilloscopes:
• DSA8300 Series
• 80C15 32 GHz Broad Wavelength Module;
supports both SMF and MMF; now available
with optional CRTP (Clock Recovery Trigger
Pickoff)
• 80C10C 80+ GHz Optical Bandwidth Module
• 80C12B 10 Gb/s and Trib Rate Optical Module
• Ultra low noise BERT Signal Generation and
comprehensive impairment capabilities (BUJ,
RJ, SJ) at full data rates.
• 80C14 14+ GHz Bandwidth Broad Wavelength
Optical Module
• 100G-TXE offers fully automated KR4, CR4 and
CAUI-4 based electrical transmitter conformance
testing. IConnect provides S-parameters.
• 80SJARB Arbitrary Data Jitter Analysis Software
• All systems can be fully integrated into automation
frameworks for PV characterization and test.
Coherent Optical Modulation Analyzers:
• TF-GBE-EE
• TF-XGbT
RECOMMENDED PRODUCTS:
• OM4000 Series
• TF-SFP-TPA-HCB-PK
• BSA286CL 28.6 Gb/s BERTScope or PPG/
PED320x 32 Gb/s PatternPro Series
• OM2000 Series
For more information visit:
• DSA8300 Sampling Scope with low jitter electrical/
TDR modules
• OM1106 Coherent Lightwave Signal Analyzer
Software
• DPO7000 Series Real-Time Scopes
• MSO/DPO5000 Series Oscilloscopes
• MDO4000C Series
Test Fixtures:
• TF-GBE-ATP
tek.com/technology/ethernet-test
• 80SJNB Jitter and BER Analysis Software
• DPO70000SX Series
• OM5000 Series
Application Software:
• DSA8300 Opt. CEI-VSR
• CR286A 28.6Gbps Clock Recovery Instrument
For more information visit: tek.com/optical
• IConnect for S-Parameter and Time Domain
Network Analysis
For more information visit: tek.com/dsa8300
tek.com/bertscope • tek.com/100G
tek.com/400G
TEK.COM/SOFTWARE-1 | 35
OSCILLOSCOPE APPLICATION SOFTWARE
Power Measurements
Automotive
WLAN (IEEE 802.11)
Power Analysis and Compliance Solution
with Tektronix Oscilloscopes, Probes, and
Power Analyzers
Intelligent embedded systems are the new
driving force in today’s automotive designs.
The latest safety and eficiency technologies
are made possible by the incorporation of
an extensive variety of complex embedded
devices that make thousands of decisions per
second. Eficient veriication and debug of
common automotive serial buses like CAN,
CAN FD, LIN, FlexRay, BroadR-Reach and
MOST will speed integration of these embedded
technologies and build conidence in test
engineering.
Whether you are testing a new chipset,
designing a new WLAN module, or integrating
a module into your latest design, Tektronix
provides Wi-Fi testing solutions to help you
get the job done. Speed up your RF testing
with automatic transmitter PHY measurements
deined by the standard. Support is available
for multiple 802.11 standards, including
802.11a/b/g/j/p/n/ac.
Today’s power supplies achieve higher levels
of eficiency in response to tighter regulations
and consumer expectations. Specialized
power mesurements and compliance tests
are time-consuming and critical. Tektronix
power measurement solutions help you
achieve fast, accurate, repeatable results
and compliance reports.
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• TPS2000 Series
- TPS2PWR1 Power Measurement and Analysis
Software
• MDO3000 Series
- MDO3PWR
• MDO4000C Series
- DPO4PWR Power Analysis Module
• MSO/DPO5000, DPO7000, MSO/DPO70000
Series
- DPOPWR Power Measurement and
Analysis software
- USBPWR Automated Compliance testing
for USB EPS Adapter
RECOMMENDED PRODUCTS:
Oscilloscopes and Application Software:
• MSO/DPO2000 Series
- CAN, LIN
• MDO3000 Series
- CAN, CAN FD, LIN
- FlexRay
• MDO4000C Series
- CAN, CAN FD, LIN
- FlexRay
• MSO/DPO5000 Series
- CAN, LIN
- FlexRay
- BroadR-Reach
Probing:
• TCP0030A / TCP0150 / TCP202A AC/DC Current
Probes
- CAN, LIN
• TMDP0200/THDP0200/THDP0100 High Voltage
Differential Probes
- BroadR-Reach
- FlexRay
- MOST
• P5100A Passive High Voltage Probe
For more information visit:
tek.com/industry/automotive
Power Analyzers:
• PA1000 Power Analyzer
Signal Generators:
• AFG3000 Series Arbitrary Function Generator
For more information visit:
tek.com/power
36 | TEK.COM/SOFTWARE-1
Instruments:
• RSA300 Series Real-Time Spectrum Analyzer
• RSA500 Series Real-Time Spectrum Analyzer
• RSA600 Series Real-Time Spectrum Analyzer
• RSA5000 Series Real-Time Spectrum Analyzer
• RSA7000 Series Real-Time Spectrum Analyzer
• MDO4000C Series Mixed Domain Oscilloscopes
• MSO/DPO70000 Series Oscilloscopes
• DPO7000C Series Oscilloscopes
Software Solutions:
• WLAN options for RSA5000 Real-Time Spectrum
Analyzers
• SignalVu with WLAN options on Windows
oscilloscopes
• SignalVu-PC with WLAN options for the
MDO4000B/C and the RSA USB Spectrum
Analyzer Series
- MOST
• DPO7000 Series
• TCPA300/400 Series Current Probes and
Ampliiers
• TDP0500/TDP1000 Differential Probes
RECOMMENDED PRODUCTS:
For more information visit:
tek.com/wi-i
OSCILLOSCOPE APPLICATION SOFTWARE
EMI Diagnostics and
Precompliance
Reduced time to solution for EMI problems
Time-saving solutions for the EMI problems
you never planned for. Today’s biggest EMI
challenges are identifying the location and
source of an EMI problem and capturing a
transient EMI event. Tektronix MDO4000C
Series Mixed Domain Oscilloscopes combine
the functionality of a mixed signal
oscilloscope with a spectrum analyzer;
capture synchronized analog, digital and RF
signals, all time correlated for a complete
system view of your device.
The MDO3000 Series also feature a built-in
spectrum analyzer. Tektronix Real-Time
Spectrum Analyzers are able to view, trigger
on and analyze the effects of the briefest of
signals as they occur in frequency domain
and include limit-line scans with pass/fail
testing, EMI ilter, detectors and averaging for
high-conidence precompliance testing.
The RSA300/500/600 Series with SignalVu-PC
provide you with a real time DPX spectrum
display. This real time display allows you to
see interference or other signal problems that
other analyzers would miss. Additionally,
SignalVu-PC offers user deinable limit lines, a
logarithmic scale, and CISPR and MIL-STD
ilters and some detectors that can be helpful
to perform a worst case, low cost EMI sweep
before inal compliance is sought. This
powerful combination of signal discovery for
troubleshooting and measurements against
real EMI limit lines is helpful to better prepare
yourself for taking your design through some
basic checks for major EMI violations
RECOMMENDED PRODUCTS:
Diagnostics:
• RSA300 Series Real-Time Spectrum Analyzer
• RSA600 Series Real-Time Spectrum Analyzer
• MDO3000 Series Mixed Domain Oscilloscope
• MDO4000C Series Mixed Domain Oscilloscopes
+ Spectrum Analyzer
• RSA5000 Series Real-Time Spectrum Analyzers
Precompliance:
• RSA5000 Series Real-Time Spectrum Analyzers
For more information visit:
tek.com/rf
38 | TEK.COM/SOFTWARE-1
Radar/EW
Performance, Precision and Insight for
Your Radar/Electronic Warfare Design
With today’s rapid advances in radar/
electronic warfare technology, developing
and manufacturing highly specialized and
innovative electronic products requires
leading-edge technology and tools.
Our innovative test equipment captures
millions of pulses and reduces uncertainty
during the design process
and delivers conidence in the integrity
of increasingly complex designs.
RECOMMENDED PRODUCTS:
IEEE 802.11ad/WiGig
Transmitter Design
Design Leading-Edge Performance
with Confidence
Push your design to the highest level
performance with an easy test setup
calibrated up to 70 GHz in manufacturing.
You can view the entire spectrum and analyze
up to 70 GHz bandwidth per acquisition. In
addition, you can conduct complete
veriication per the standard and perform
troubleshooting, debugging within the same
software tool.
RECOMMENDED PRODUCTS:
Receiver/Stimulus Test and Threat
Emitter Simulation:
Transmitter Analysis:
• AWG5000 Series Arbitrary Waveform
Generator with RFXpress® software
• DPO77002SX ATI oscilloscope with
SIgnalVu options SVE and SV30
• AWG70000A Series Arbitrary Waveform
Generator with RFXpress® software
Receiver/ Signal Generation:
Transmitter Analysis:
• RSA5000 Series Spectrum Analyzer
• RSA7000 Series Real-Time Spectrum Analyzer
• RSA600 Series Real-Time Spectrum Analyzer
• Pulse analysis option 20 for RSA5000B
Spectrum Analyzers
• SignalVu Oscilloscope Software with Pulse
analysis option SVP
• SignalVu-PC with Pulse analysis option SVP
for the MDO4000C and the RSA Series
• MSO/DPO70000 Series Oscilloscope with
SignalVu option SVP software
• MSO/DPO5000, DPO7000C and DPO70000SX
Series Oscilloscopes with SignalVu option
SVP software
• MDO4000C Series Mixed Domain Oscilloscope
For more information visit:
tek.com/radar
• AWG70000A Series Arbitrary Waveform
Generator with option AC and SourceXpress
with pre-compensation plug-in
For more information search: 802.11ad on tek.com
OSCILLOSCOPE APPLICATION SOFTWARE
Bluetooth®
APCO Project 25 (P25)
LTE™ Downlink
Whether you are validating a new chipset,
designing a new wireless module or integrating
Bluetooth into your latest design, Tektronix
provides RF PHY testing solutions to help
you get the job done and get your design to
market faster.
Whether you are testing a P25 mobile,
portable radio transmitter, or a base station
for Phase 1 or Phase 2, Tektronix provides
P25 RF transmitter testing solutions to help
you get the job done. Tektronix solutions give
you a simple setup of 28 TIA-102 measurements
with pass/fail results so that you can pass
performance and compliance tests accurately
and quickly.
Are you planning to do a quick RF veriication
of your Small Cell transmitter design?
Tektronix provides an LTE solution to help get
your job done quickly. Support is provided for
RF-PHY measurements and Cell Identiication
for TDD and FDD.
Support is available for Phase 1 and Phase
2 transmitter compliance test solution.
• RSA300 Series Real-Time Spectrum Analyzer
Support is available for Basic Rate, Enhanced
Data Rate and Bluetooth Low Energy.
Contact Tektronix for Bluetooth 5 support.
RECOMMENDED PRODUCTS:
Instruments:
• RSA300 Series Real-Time Spectrum Analyzer
• RSA500 Series Real-Time Spectrum Analyzer
• RSA600 Series Real-Time Spectrum Analyzer
• RSA5000 Series Real-Time Spectrum Analyzer
• RSA7000 Series Real-Time Spectrum Analyzer
• MDO4000C Series Mixed Domain Oscilloscopes
• MSO/DPO70000 Series Oscilloscopes
• DPO7000C Series Oscilloscopes
Software Solutions:
• Bluetooth option 27 RSA5000 for Real-Time
Spectrum Analyzers
RECOMMENDED PRODUCTS:
Instruments:
• RSA5000 Series Real-Time Spectrum Analyzer
• RSA7000 Series Real-Time Spectrum Analyzer
• MDO4000B/C Series Mixed Domain
Oscilloscopes
• RSA500 Series Real-Time Spectrum Analyzer
• MSO/DPO70000 Series Oscilloscopes
• RSA600 Series Real-Time Spectrum Analyzer
• DPO7000 Series Oscilloscopes
• RSA5000 Series Real-Time Spectrum Analyzer
Software Solutions:
• RSA7000 Series Real-Time Spectrum Analyzer
• SPECMON Series Real-Time Spectrum Analyzer
• MDO4000C Series Mixed Domain Oscilloscopes
• MSO/DPO70000 Series Oscilloscopes
• DPO7000C Series Oscilloscopes
• MSO/DPO5000 Series Oscilloscopes
• SignalVu-PC with Bluetooth option SV27 for the
MDO4000B/C and the RSA USB Spectrum
Analyzer Series
• P25 option 26 for RSA5000/SPECMON
Real-Time Spectrum Analyzers
tek.com/bluetooth
• RSA500 Series Real-Time Spectrum Analyzer
• RSA300 Series Real-Time Spectrum Analyzer
• SignalVu with Bluetooth option SV27
on Windows Oscilloscopes
For more information visit:
RECOMMENDED PRODUCTS:
Instruments:
• LTE DL option 28 for RSA5000 Real-Time
Spectrum Analyzers
• SignalVu with LTE DL option SV28 on Windows
Oscilloscopes
• SignalVu-PC with LTE DL option SV28
Software Solutions:
• SignalVu with P25 option SV26 on Windows
Oscilloscopes
• SignalVu-PC with P25 option SV26
for the MDO4000B/C and the RSA USB Spectrum
Analyzer Series
For more information visit:
tek.com/application/P25-testing-and-analysis
TEK.COM/SOFTWARE-1 | 37
OSCILLOSCOPE PROBES AND ACCESSORIES
OSCILLOSCOPE PROBES AND ACCESSORIES
Tektronix probes and accessories are perfectly matched to our industry-leading oscilloscopes.
With over 100 choices available, you will ind the probe you need.
Isolated
Measurement
Systems
• High-resolution
measurements in the
presence of common
mode signals or noise
• Up to 1 GHz bandwidth
• Complete galvanic isolation
• 1 Million to 1 (120 dB) of
common mode rejection
at 100 MHz
Low Voltage
Differential
Probes
High Voltage
Differential
Probes
• Bandwidth up to 33 GHz
• Dynamic range to ± 6000 V
• Easily measure differential
signals
• Bandwidth up to 200 MHz
• Low input capacitance:
down to < 0.3 pF
• Most extensive set of
probe accessories
• High common mode
rejection ratio (CMRR)
Current Probes
• Easy to use and accurate
AC/DC current
measurements
• DC up to 2 GHz
• Amplitude measurements
from 1 mA to 2,000 A
• Split core and solid core
construction
• Wide range of probe tips
for easier circuit access
http://www.tek.com/isolatedmeasurement-systems
tek.com/differentialprobe-low-voltage
tek.com/differentialprobe-high-voltage
Low Voltage
Single-ended
Probes
High Voltage
Single-ended
Probes
Optical
Passive Probes
• Bandwidth up to 4 GHz
• Bandwidth up to 800 MHz
• True signal reproduction
and idelity
• Dynamic range to 2500 V
• High-bandwidth DC up to
1.2 GHz
• Best-in-class bandwidth
up to 1 GHz
• Best-in-class input
capacitance as low as 3.9
pF, which minimizes probe
loading effects
• Dynamic range to 300 V
CAT II
• Rugged and reliable
tek.com/passive-probe
• Low input capacitance:
down to < 0.8 pF
• Best-in-class probe loading
with input capacitance as
low as 1.8 pF
tek.com/current-probe
• Broad Wavelength
Response: 500 to 950 nm
or 1100 to 1700 nm
• High Gain 1 V/mW
• Low Noise <11 pW/√Hz
• Small, compact probe
heads for probing small
geometry circuit elements
tek.com/low-voltage-probesingle-ended
tek.com/high-voltage-probesingle-ended
tek.com/optical-probe
TEK.COM/ACCESSORIES | 39
OSCILLOSCOPE PROBES AND ACCESSORIES
INTERACTIVE PROBE SELECTOR TOOL
Need help finding the right probe
for your application? The online
Tektronix Probe Selector Tool will
guide you through a few easy
questions to match your need to
the right probe. Visit us anytime,
anywhere at: tektronix.com/probes.
MOST POPULAR
DOWNLOADS
Here is a list of our most
popular downloaded content
for oscilloscopes. Click below
to download your copy:
1. XYZs of Oscilloscopes Primer
2. ABCs of Probes Primer
3. Fundamentals of the
MD4000C Series Mixed
Domain Oscilloscopes
4. Fundamentals of
Signal Integrity Primer
5. Debugging Serial Buses in
Embedded Systems Designs
Application Note
IsoVu™ Technology
See What’s Been Hidden. Until Now
Common mode interference often causes engineers to design,
debug, evaluate, and optimize “blind.”
Revolutionary IsoVu™ technology uses optical
communications and power-over-fiber for
complete galvanic isolation. When combined with
an oscilloscope equipped with the TekVPI interface,
it is the first, and only, measurement system capable of
accurately resolving high bandwidth differential signals
in the presence of large common mode voltage.
LEARN MORE
40 | TEK.COM/PROBES
AlliCE
Allied Consulting Engineers
make ALLICE your partner
ALLICE Messtechnik GmbH
ALLICE SysTec GmbH
Kelsterbacher Strasse 15-19
Tel.: +49(0)69-67724-583
60528 Frankfurt am Main
Fax: +49(0)69-67724-582
[email protected]
www.allice.de
© 2017 Allice Messtechnik GmbH & Allice SysTec GmbH– Alle Rechte vorbehalten.
© 2017 Allice Messtechnik GmbH & Allice SysTec GmbH– All rights reserved
Verwendete Warenzeichen und Schutzrechte sind Eigentum der jeweiligen Hersteller.
Logos and company names listed are trademarks or trade names of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement