Dent Instruments Dent ELITEpro SP Portable Power Meter

Dent Instruments Dent ELITEpro SP Portable Power Meter
F E AT U R E S
ƒƒ
Works on single or 3-phase loads on 0-600V (AC or DC) voltage services.
Measures up to four channels of current from 0-6,000 amps (AC current).
ƒƒ
Line-powered – no need for batteries or external power source.
ƒƒ
User-selectable integration periods: 1, 3, 15, and 30 seconds; 1, 2, 5,
10, 15, 20, and 30 minutes; 1 and 12 hours; 1 day.
ƒƒ
8MB non-volatile memory standard for up to months of recording time.
ƒƒ
Better than 1% accuracy (<0.2% typical).
ƒƒ
Fast USB connection and standard Ethernet port.
ƒƒ
ELITEpro SP may be configured with optional Bluetooth® wireless
technology.
ƒƒ
Optional Wi-Fi interface allows for remote data collection over wireless
networks. Check real-time values using a Wi-Fi-enabled laptop, tablet, or
smartphone via a web browser.
ƒƒ
Simple yet powerful Windows-based ELOG™ software package for setup,
data retrieval, and analysis. Easy data exporting to almost any analysis
program such as Excel® and Access®.
ƒƒ
Easy setup and installs in minutes. Patented PhaseChek™ LED indicators
ensure correct CT orientation at installation.
ƒƒ
Rugged and compact—easily fits inside breaker panels and switch gear.
ƒƒ Measurement and
Verification (M&V) Studies
ƒƒ Electrical Load Profiling
ƒƒ Energy Audits
Shop for Dent products online at:
www.
ƒƒ New Technology
Assessment Studies
PowerMeterStore.ca
1.877.766.5412
E L I TE PRO SP D E TAIL S
™
FOCUSED
ON ENERGY
MEASUREMENT
DENT Instruments designs
and manufactures data
loggers and energy
recorders for today’s energy
professionals. Our products
are often the first step in
developing strong energy
strategies, for maintaining
peak operations, and for
lowering operating costs.
Our company has built a
reputation for providing
instruments of the highest
quality whose robust design,
small size and remote data
acquisition make them
the loggers of choice for
companies large and small.
A DEPENDABLE AND VERSATILE TOOL
TO MEASURE YOUR ENERGY USAGE
The ELITEpro SP is a complete solution for pinpointing electric usage and quantifying energy usage. It
is capable of measuring, storing, and analyzing electrical consumption data which is derived from the
voltage and current inputs. The ELITEpro SP uses direct connections to each phase of the voltage and
various interchangeable CT options such as split-core current transformers or flexible RoCoils™ (for
large loads or large cables and bussbars) to monitor current on each phase.
These meters can capture kWh/kW energy and demand data as well as virtually all relevant energy
parameters for diagnostics and monitoring on three-phase or single-phase circuit installations.
Electrical load diagnostic parameters such as power factor (both Apparent and Displacement) are
captured in addition to energy and demand values.
The ELITEpro SP flexibility, size, and ease-of-use make them ideal tools for gathering detailed
consumption information in commercial, industrial, government and retail environments.
ELITEPRO SP ANATOMY
Optional Wi-Fi Interface
may be ordered with
external 3 dbi antenna
PhaseChek™ LEDs
to ensure proper CT
phasing
Standard USB Port: Download
full 8MB data file in less than
5 minutes.
Mounting Tab
Since the company’s
emergence in 1988, we
have performed energy
measurement studies for
a wide range of utility,
government, and private
clients. This unique customer
perspective has strongly
influenced the design of our
products, reflected in their
ease of installation and use.
Power In/Out
Mounting magnets
(not pictured)
Standard Ethernet Port
Terminal Block for Current
Transformer (CT) Connections
DENT products provide
meaningful energy data that
is used to accurately allocate
energy costs, identify energy
cost-savings opportunities
and lower utility bills. Our
versatile instruments help
pinpoint electrical usage and
quantify consumption.
Standard Ethernet port
Voltage Lead
Connections
Logging On/Comm
Indicator LED
Mounting Tab
FIELD-PROVEN: RUGGED & COMPACT
Measuring in at only 21.6 x 6.3 x 4.7 cm (8.5” x 2.5” x 1.9”) and
weighing 340 grams (12 ounces), the ELITEpro SP was designed
to fit inside panels for safety and convenience. Its rugged plastic
housing is even supplied with magnets on the housing to facilitate
mounting.
A drop-in, NEMA 4X
rated enclosure is
available for harsh
environments.
Shop for Dent products online at:
www.
Our optional NEMA 4 rated weathertight drop-in enclosure delivers
stronger environmental integrity, separate voltage plugs, watertight connectors for both the current leads and the power and
communication cables. This option for the ELITEpro SP will meet the
stringent requirements of remote data logging.
PowerMeterStore.ca
1.877.766.5412
EL I TE PR O S P FE ATUR E S
™
LINE POWERED WITH REDUCED
IMPACT ON THE ENVIRONMENT
EXCLUSIVE CT PHASE ERROR
CORRECTION
The ELITEpro SP is powered directly from the phases of the
service being measured. It incorporates a broadband power
supply which operates on virtually any 80-600V service. You
will not have to worry about constantly changing or recharging
batteries, nor finding an external power source at the job
site. And you will avoid the negative environmental impact of
disposing of batteries containing rare earth materials that are
difficult to recycle or reclaim.
All CTs exhibit both a ratio error and phase shift error. The
CT phase error results from the phase relationship of the
input versus output signal difference. This inherent phase
angle error affects power readings if left uncorrected. When
using CTs with a known phase angle error, the ELITEpro SP
can correct for this error—making your calculations more
accurate, particularly on loads with low power factor.
EFFECT OF CT PHASE ANGLE ERROR ON POWER MEASUREMENTS
MEMORY FOR EXTENDED RECORDING
Measurements are stored in on-board memory at recording
intervals selected by the user, which can be as short as one
second or as long as once every 24 hours. The ELITEpro SP
has 8MB of internal non-volatile memory, which allows for
long-term logging sessions. For example, with a WYE setup
and recording all available system measurements ON with 2
minute integration interval, the ELITEpro SP can log for over
80 days!
FAST SAMPLING RATE CAPTURES
POWER QUALITY DATA
Regardless of the user-selectable recording interval, the
ELITEpro SP has a waveform sampling frequency of 12 kHz.
This is the number of data points the logger samples on each
AC waveform (200 points per cycle at 60 Hz; 240 points per
cycle at 50 Hz). The channel sampling rate is 8 Hz or every
125 mSec. This fast sampling rate allows for real-time display
of voltage, current waveforms, and harmonics.
For example, with an uncorrected 3° phase angle error and reported power factor
of 0.5, there is a corresponding kW error of >10%.
BI-DIRECTIONAL METERING FOR
RENEWABLES STUDIES
The ELITEpro SP design delivers bi-directional metering,
which is capable of monitoring power generated by a
renewable energy source versus power imported from the
grid—ideal for solar power measurements.
WIDE SELECTION OF CTS
(a)
The ELITEpro SP uses various interchangeable CT options
such as split-core, clamp-on, or flexible RoCoil™ current
transformers. With the ELITEpro SP comes embedded
Rogowski coil CT amplifier/integrator circuitry—no need to
provide external power to the CTs.
(b)
(c)
A wide selection of CTs is
available. Pictured: (a) ClampOn, (b) Mini-Hinged, (c) SplitCore, and (d) flexible RoCoil
(Rogowski) CTs
Shop for Dent products online at:
(d)
www.
All DENT CTs are internally shunted for intrinsically safe
operation on energized conductors. Special high-accuracy
CTs are available for existing CT secondary monitoring. The
ELITEpro SP can monitor up to four single-phase loads, two
three-phase (3-wire) Delta loads or one three-phase (4-wire)
WYE load.
PowerMeterStore.ca
1.877.766.5412
EL I TE PR O S P S TART TO FINISH
™
EASY SETUP, INSTALLATION, AND DATA RETRIEVAL
Using the ELITEpro SP on your next project is as easy as 1, 2, 3.

INSTALL ELOG AND SEND A SETUP
TABLE TO THE ELITEPRO SP
The ELITEpro SP is configured using ELOG software. A Setup
Table is the file that programs the logger for an upcoming project.
Set parameters such as sampling rate and type of service then
send the file to the logger. The ELITEpro SP is now ready for
deployment.
A simple one-page Setup Table guides you through the
ELITEpro SP’s flexible metering options.

CONNECT THE ELITEPRO SP TO THE
PANEL YOU NEED TO MEASURE

DOWNLOAD THE DATA FROM THE
ELITEPRO SP
Installation and connection of the ELITEpro SP is both simple and
straightforward. Magnets on the housing facilitate mounting inside
electrical cabinets. A variety of internally-shunted, snap-on CTs
and clip-on voltage leads connect to almost any panel load without
turning the power off.
At the end of the project, simply connect the ELITEpro SP to a
computer with ELOG and download the data file. Analyze the data
and create graphs in ELOG or export the data as a .csv file to
popular spreadsheet programs, such as Microsoft Excel®.
In-Depth Data Analysis: Display your data graphically.
EL O G S I M P L E D ATA A N ALY SIS
™
POWERFUL SOFTWARE
The Windows-based ELOG software package
is used to program the meter, display metered
values, and retrieve and analyze the collected data.
ELOG graphically displays recorded data, performs
analysis, and facilitates automatic remote data
collection. Data is also easily exported to popular
spreadsheet and database programs for additional
analysis. You are provided with an unlimited site
license to the software with purchase.
Shop for Dent products online at:
www.
PowerMeterStore.ca
1.877.766.5412
CO M M U N I C ATIO N O PTIO N S
CONNECT TO THE ELITEPRO SP FOUR WAYS
STANDARD USB AND ETHERNET
CONNECTIONS
Every ELITEpro SP includes a USB and Ethernet (RJ-45) port. Connect
directly to the ELITEpro SP via the included A-to-B USB cable. Or, have
the ELITEpro SP on your local area network for convenient remote
data download. Supports 10/100 MB Ethernet over Cat 5 or better
and can be configured for DHCP or static IP. Schedule automatic data
downloads from the logger using AutoPoll software (included with
ELOG). Reconfigure the ELITEpro SP for a new project without leaving
your workstation.
OPTIONAL BLUETOOTH® WIRELESS
TECHNOLOGY
Save time and meet safety requirements by communicating with an
ELITEpro SP without removing the electrical panel door. In addition to
the standard USB and Ethernet ports, ELITEpro SP instruments may
be equipped with an optional Bluetooth® wireless technology interface,
which will allow a PC with a Bluetooth® wireless technology adapter
running ELOG to connect to the ELITEpro SP over short distances
(10-100 feet typical) to send setup tables or download data. PC must
support Serial Port Profile (SPP).
OPTIONAL WI-FI INTERFACE
Need a meter on your local area network but do not have a network
connection near by? The ELITEpro SP’s optional Wi-Fi interface allows
the meter to be connected to a Wi-Fi network and accessed from any
PC on the network using ELOG software. Or, configure the ELITEpro
SP as its own Wi-Fi hotspot and view real-time data using a Wi-Fi
enabled PC, tablet, or smart phone via a web browser from up to 300
ft. away. Two antenna options available: internal antenna (75-300 ft.)
or external 3 dbi antenna (150-300 ft). Use ELOG to switch between
WiFi and QuickView™ access point mode.
Shop for Dent products online at:
QuickView™ mode sets the
ELITEpro SP as an access
point. View real-time data on
a wifi-enabled laptop, tablet,
or smartphone.
www.
PowerMeterStore.ca
1.877.766.5412
EL I TE PR O S P TRA N SFO R M ERS
MINI HINGED
MIDI HINGED
HSC-020, -050
HMC-100, -200
HIGH ACCURACY
SHS-0005, -0015
SMALL SPLIT CORE
SCS-0050, -0100
MED SPLIT CORE
SCM-0100, -0200, -0400,
-0600
KEY SPECIFICATIONS
WINDOW SIZE
1 cm (0.4”)
2.5 cm (1.0”)
1.0 cm (0.4”)
1.9 cm (.75”)
3.2 cm (1.25”)
OUTPUT SIGNAL
333 mV at rated current
333 mV at rated current
333 mV at rated current
333 mV at rated current
333 mV at rated current
USEFUL CURRENT RANGE
0.25-40 Amps
0.25-80 Amps
1-200 Amps
1-300 Amps
0.05-7 Amps,
0.15-20 Amps
1-65, 2-130 Amps
5-130, 4-260, 8-520,
12-780 Amps
ELECTRICAL SPECIFICATIONS
NOMINAL RATING
20, 50 Amps
100, 200 Amps
5 Amps, 15 Amps
50, 100 Amps
100, 200, 400, 600
Amps
ACCURACY
<0.5% at rated current
<1.0% at rated current
+/- 0.5% at rated current
+/- 1% at 10% to 130%
of rated current
+/- 1% at 10% to 130%
of rated current
PHASE SHIFT
<1.5° at rated current
<0.5° at rated current
<0.5° at rated current
<2° at rated current
<2° at rated current
FREQUENCY RANGE
50 to 400 Hz
50 to 400 Hz
10 Hz to 10 KHz
50 Hz to 400 Hz
50 Hz to 400 Hz
DIELECTRIC STRENGTH
3520 VAC for 1 minute
5200 VAC for 1 minute
5000V around the case
600V rated leads
5000V around the case
600V rated leads
5000V around the case
600V rated leads
MECHANICAL SPECIFICATIONS
DIMENSIONS
2.6 x 2.9 x 4.2 cm
(1.04 x 1.16” x 1.64”)
4.7 x 4.7 x 7.0 cm
(1.85 x 1.85 x 2.76”)
6.4 x 2.5 x 5.1 cm
(2.5 x 1.0 x 2.0”)
5.08 x 5.34 x 1.55 cm
(2.0 x 2.1 x 0.6”)
8.26 x 8.6 x 2.54 cm
(3.3 x 3.4 x 1.0”)
WEIGHT
91 g (3.2 oz)
221 g (7.8 oz)
136 g (4.8 oz)
136 g (4.8 oz)
340 g (12 oz)
POLARITY
White lead is positive
White lead is positive
White lead is positive
White lead is positive
White lead is positive
OUTPUT LEAD
Leads 2.7 m (8 ft) twisted
pair, 20 AWG
Leads 2.7 m (8 ft) twisted
pair, 22 AWG
Leads 2.7 m (8 ft) twisted
pair, 22 AWG
Leads 2.7 m (8 ft) twisted
pair, 20 AWG
Leads 2.7 m (8 ft) twisted
pair, 20 AWG
OPERATING TEMPERATURE
-15 to 60 °C
(5 to 140 °F)
-15 to 60 °C
(5 to 140 °F)
-20° to 55 °C
(-4° to 131 °F)
-20° to 55 °C
(-4° to 131 °F)
-20° to 55 °C
(-4° to 131 °F)
STORAGE TEMPERATURE
Maximum 105 °C
(220 °F)
Maximum 105 °C
(220 °F)
Maximum 80 °C
(176 °F)
Maximum 80 °C
(176 °F)
Maximum 80 °C
(176 °F)
CASE PROTECTION
White nylon, UL 94 V-0
White nylon, UL 94 V-0
Epoxy encapsulated
housing ABS/PVS UL
94 V-0
Epoxy encapsulated
housing ABS/PVS UL
94 V-0
Epoxy encapsulated
housing ABS/PVS UL
94 V-0
SAFETY SPECIFICATIONS
SAFETY REQUIREMENTS
UL Recognized:
UL STD 61010-1
Certified to:
CAN/CSA STD C22.2
No. 61010-1
UL Recognized:
UL STD 61010-1
Certified to:
CAN/CSA STD C22.2
No. 61010-1
Compliant with
IEEE C57.13-1993
CE Mark
Compliant with
IEEE C57.13-1993
CE Mark
Compliant with
IEEE C57.13-1993
CE Mark
WORKING VOLTAGE
600 VAC
Category III
600 VAC
Category III
Maximum 600 Vrms
UL 506
Maximum 600 Vrms
Category III
Maximum 600 Vrms
Category III
Shop for Dent products online at:
www.
PowerMeterStore.ca
1.877.766.5412
The ELITEpro SP can be equipped with a wide selection of current transformers. Choose from compact and economical
Split-Core CTs, convenient Clamp-On style CTs, or the versatile Rogowski Flex CTs. Each type offers its own particular
advantages depending on your application. DENT CTs are interchangable to meet your varying project requirements.
LARGE SPLIT CORE
SCL-0600, -1000
150A CLAMP-ON
CON-0150EZ
500A CLAMP-ON
CON-0500
1000A CLAMP-ON
CON-1000
ROCOIL
R16, R24, R36, R72
5.1 cm (2.0”)
5.2 cm (1.0”)
3.3 cm (1.2”)
5.2 cm (2.0”)
16”: 13 cm (5”)
24”: 19 cm (7”)
36”: 26 cm (10”)
72”: 56 cm (22”)
333 mV at rated current
333 mV @
150 Amps AC
333 mV @
500 Amps AC
333 mV/A @
1000 Amps AC
131 mV/1000A @ 60 Hz
110 mV/1000A @ 50 Hz
30-780, 20-1300 Amps
.5 to 300 Amps
20 to 600 Amps
20 to 1200 Amps
ESP/PS3: 50-5000 Amps
PS18: 50-3500 Amps
600, 1000 Amps
150 Amps
500 Amps
1000 Amps
3000 Amps
+/- 1% at 10% to 130%
of rated current
<1% at rated current
±2.5% for 20 to 600 Amps
48-440 Hz
±3.5% for 20 to 600 Amps
440-1000Hz
+/- < 1%
+/- 1% reading
<2° at rated current
< 1° from 5 to 25A
1° from 25 to 150A
< 1.5° from 150 to 300A
< 3° for 20 to 600 Amps
50/60 Hz
+/- < 1°
< 1° at 50/60 Hz
50 Hz to 400 Hz
50 Hz to 400 Hz
48 Hz to 1000 Hz
30 Hz to 5 kHz
40 Hz to 5000 Hz
5000V around the case
600V rated leads
5200 VAC, CAT III
6000V, 50/60 Hz between
primary, secondary and
outer case of the handle,
3000V 50/60 Hz between
primary and secondary
5200 VAC, 50/60
Hz between primary,
secondary and the outer
case of the handle
7400 VAC around coil
1000 VAC rated leads
12.07 x 12.70 x 3.05 cm
(4.8 x 5.0 x 1.2”)
8.7 x 5.0 x 1.9 cm
(3.4 x 1.9 x 0.8”)
19.5 x 6.6 x 3.4 cm
(7.7 x 2.6 x 1.3”)
21.6 x 11.1 x 4.5 cm
(8.5 x 4.4 x 1.8”)
Length 16” (40 cm)
Length 24” (60 cm)
Length 36” (90 cm)
Length 72” (180 cm)
748 g (26 oz)
136 g (4.8 oz)
350 g (12 oz)
500 g (19 oz)
16”: 184 g (6 oz)
24”: 216 g (7 oz)
36”: 312 g (11 oz)
72”: 495 g (17 oz)
White lead is positive
Red lead is positive
Red lead is positive
Red lead is positive
White lead is positive
Leads 2.7 m (8 ft) twisted
pair, 20 AWG
2.4 m (8’)
22 gage, 600V
3 m (118”)
Double insulated
3 m (118”)
Double insulated
2 m (79”) shielded cable
-20° to 55 °C
(-4° to 131 °F)
-20° to 70 °C
(-4° to 158 °F)
-15 to 50 °C
(5 to 122 °F)
-10 to 50 °C
(14 to 120 °F)
-10° to +80 °C
(+14° to +176 °F)
Maximum 80 °C
(176 °F)
-25° to 70 °C
(-13° to 158 °F)
-40 to 80 °C
(40 to 176 °F)
-20 to 70 °C
(-4 to 160 °F)
Maximum 80 °C
(176 °F)
Epoxy encapsulated
housing ABS/PVS UL
94 V-0
White ABS, UL 94 V-0
IP 40 (IEC 529)
UL 94 V-0
IP 40 (IEC 529)
UL 94 V-0
Thermoplastic Rubber
UL 94 V-0
Compliant with
IEEE C57.13-1993
CE Mark
UL Recognized:
UL STD 61010-1
Certified to:
CAN/CSA STD C22.2
No. 61010-1
CE Mark, Compliant with
IEC 1010-2-032
CAN/CSA STD C22.2
No. 61010-1
CE Mark, Double
Insulation, EN-61010
CAN/CSA STD C22.2
No. 61010-1
Maximum 600 Vrms
Category III
Maximum 600 Vrms
Category III
Maximum 600 Vrms
Category III
Maximum 600 Vrms
Category III
Maximum 1000 Vrms
Category III
Shop for Dent products online at:
www.
PowerMeterStore.ca
1.877.766.5412
EL I TE PR O S P S PE CIFICATIONS
™
ORDERING INFORMATION
TECHNICAL
ESP ORDER STRING
SERVICE TYPE
Single Phase (two wire or three wire), Three Phase-Four
Wire (WYE), Three Phase-Three Wire (Delta)
VOLTAGE CHANNELS
3 channels, CAT III, 0-600 VAC or 850 VDC (line-to-line)
CURRENT CHANNELS
4 channels, .67 VAC max, 333 mV full scale CTs
MAXIMUM CURRENT INPUT
200% of current transducer rating (mV CTs)
Measure up to 5000A with RoCoil CTs.
MEASUREMENT TYPE
True RMS using high-speed digital signal processing (DSP)
LINE FREQUENCY
50/60/400 Hz*
WAVEFORM SAMPLING
12 kHz
CHANNEL SAMPLING RATE
.125 seconds
INTEGRATION PERIOD
1, 3, 15, 30 seconds; 1, 2, 5, 10, 15, 20 and 30 minutes;
1 and 12 hours; 1 day
MEASUREMENTS
Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA,
kVAh, Displacement Power Factor (dPF). All parameters for
each phase and for system total.
VOLTAGE LEAD COLORS
Better than 1% (<0.5% typical) for V, A, kW, kVAR, kVA, PF
RESOLUTION
0.01 Amp, 0.1 Volt, 1 Watt, 1 VAR, 1 VA, 0.01 PF
LED INDICATORS
Tri-color (red, green, blue): 1 LED indicates communication
(blue for wireless, Bluetooth® or Ethernet), 4 LEDs for
correct phasing (PhaseChek™), 2 LED Digital indicators.
PULSE OUTPUT
Open collector with 10K ohm pull up to 5V, 75 mA max.
POWER
LINE-POWER
From L1 Phase to L2 Phase. 80-600VAC CAT III 50/60 Hz,
125 mA, 5 W, or 10 VA max. Non-user replaceable .5 Amp
internal fuse protection.
POWER IN
6-10 VDC, 500 mA
POWER OUT
6 VDC, 200 mA max
(CHOOSE ONE)
U
=
US/NORTH AMERICAN*
I
=
INTERNATIONAL*
ADDITIONAL COMMUNICATION OPTIONS
(CHOOSE ONE)
N
=
NONE (ETHERNET & USB ONLY)
B
=
BLUETOOTH® WIRELESS TECHNOLOGY
WI
=
WI-FI WITH INTERNAL ANTENNA
WE
=
WI-FI WITH EXTERNAL 3 DBI ANTENNA
VOLTAGE CLIPS
(CHOOSE ONE)
C
=
CROC CLIPS
F
=
FUSED CROC CLIPS
S
=
SHARK CLIPS
L
=
UNTERMINATED LEADSET
N
=
NONE
INCLUDED
ACCURACY
ESP
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Ethernet Port & USB Port
8 MB Memory
ELOG™ Software
Line Power
USB Cable
Carrying Case
A VARIETY OF VOLTAGE CLIPS
COMMUNICATIONS
Several voltage clips options are available to meet your project
needs: Croc Clips, Fused Crocs, Colored Leads, or Shark Clips.
USB (STANDARD)
USB standard. 1.8 M (6 ft) A-to-B USB Cable (included)
ETHERNET (STANDARD)
Standard RJ-45 Connector supports 10/100 MB Ethernet
over Cat 5 or better. Configure for DHCP or Static IP.
BLUETOOTH® WIRELESS
TECHNOLOGY (OPTIONAL)
Internal antenna with 10-100 ft range (typical). Requires
Bluetooth® wireless technology adapter on Windows PC.
Adapter must support the Serial Port Profile (SPP).
WI-FI ADAPTER† (OPTIONAL)
Wi-Fi option available as two separate configurations:
• Internal antenna: typical range 75-300 ft.
• External 3 dbi antenna: typical range 150-300 ft.
MECHANICAL
Croc Clips
OPERATING TEMPERATURE
-7 to + 60 °C (20 to 140 °F)
OPERATING HUMIDITY
5% to 95% non-condensing
ENCLOSURE TYPE
ABS plastic, 94-V0 flammability rating
WEIGHT
340 g (12 ounces)
DIMENSIONS
21.6 x 6.3 x 4.7 cm (8.5” x 2.5” x 1.9”)
DENT Instruments, Inc.
Shop for Dent products online at:
Colored Leads
Shark Clips
* Performance varies at 400 Hz operation. Contact the factory for details.
† ELITEpro SP loggers that are equipped with a Wi-Fi package contain an internal antenna. An external antenna
is optional. You may toggle between using the internal and external antenna (if it is available on your logger) by
checking or unchecking the Use External Antenna checkbox in ELOG.
*US/NORTH AMERICAN ELITEpro SP configuration includes 4 color (black, blue, red, white) voltage leads and
croc clips. INTERNATIONAL ELITEpro SP configuration includes 3 black voltage lead connections, 1 white
connection (neutral) and 5 color (black, blue, red, white, yellow) voltage leads and croc clips.
DISTRIBUTOR:
PLACE CONTACT INFO HERE
Energy & Power Measurement Solutions
925 SW EMKAY DRIVE
BEND, OREGON 97702 USA
541.388.4774 | 800.388.0770
www.DENTinstruments.com
Fused Croc Clips
www.
PowerMeterStore.ca
© DENT Instruments, Inc.
All specifications subject to change without notice
rev022613
1.877.766.5412
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising