HP ProLiant ML110 Generation 6

HP ProLiant ML110 Generation 6
QuickSpecs
HP ProLiant ML110 Generation 6
Overview
Front View:
1.
DVD-ROM Drive
2.
Power LED
3.
Drive Activity LED
4.
Front Bezel
5.
SAS Cable (SAS model only)
6.
CPU Heatsink
7.
Hard Drive Controller Card (Optional)
8.
System Fan
9.
System Board
10. 300W Power Supply
Rear View:
1. Kensington lock notch
2. Cable lock provision notch
3. Access panel thumbscrew
4. Expansion slot cover retainer thumb screw
5. Expansion slot cover
6. Expansion slot 1
7. Expansion slot 2
8.. Expansion slot 3
9. Expansion slot 4
10. Management NIC port (RJ-45)
11. Video port
12. Serial port
13. USB ports
14. Embedded NIC port (RJ-45)
15. PS/2 keyboard port
16. PS/2 mouse port
17. Power supply cable socket
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 1
QuickSpecs
HP ProLiant ML110 Generation 6
Overview
At A Glance
Processor:
Intel® Xeon® processor X3400 series
Intel® 3420 chipset
Memory:
Four (4) DIMM slots
2GB (1x2GB) or 4GB (2x2GB) Standard/8GB Maximum, using PC3-10600E DDR3 Unbuffered (UDIMM) ECC
memory, operating up to 1333MHz
Storage Controller:
Integrated 6 ports SATA controller
(4 ports available for hard disks)
NOTE: Transfer rate: 3 Gb/s SATA.
Internal Drive Support:
Internal SAS storage capacity of up to 1.8TB (4 x 450GB 3.5" SAS drives)
Internal SATA storage capacity of up to 3.0TB (4 x 750GB 3.5" SATA drives)
Network Controller:
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Expansion Slots:
Slot 1: PCI-e Gen 1, x1 (x4 connector) Full-height & Half-length
Slot 2: PCI 32-bit/33 MHz at 3.3V Full-height & Full-length
Slot 3: PCI-e Gen 1, x4 (x8 connector) Full-height & Full-length
Slot 4: PCI-e Gen 2, x16 (x16 connector) Full-height & Full-length
USB 2.0 Ports:
Eight (8) USB 2.0 ports: 2 front , 4 rear, 2 internal (one for tape, one for standard USB device)
Security - Trusted Platform Module:
One (1) internal TPM 1.2 module connector (Optional)
Power Supply:
300 Watts Non-Hot Plug, Non Redundant Power Supply (80% efficiency)
Management:
Standard Lights Out 100 IPMI 2.0 reporting
Standard HP ProLiant ML110 G6 Easy Set-up CD
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Operating System:
Supports Windows including Hyper-V, RHEL and SLES
Form Factor:
Micro ATX tower (4U)
NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see the options
section in this QuickSpecs
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair are available for one year from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. Hard drives
have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support with next business day
response. (3-1-1 warranty offered in Brazil only). Warranty repairs may be accomplished through the use of
Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed
for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR
part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 2
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Processor
One of the following
depending on Model
Quad-Core Processors
Intel® Xeon® processor X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Xeon® processor X3450 (2.66GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4)
Intel® Xeon® processor X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3)
NOTE: Available through Configure To Order only. See Factory Integration Models section for
more details.
Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
Cache Memory
Integrated 1x8MB Intel® Smart Cache
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
Chipset
Intel® 3420 chipset
Memory Protection
ECC
Memory
Type
Standard
Maximum
Network Controller
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Expansion Slots #
Technology
1
PCIe
PC3-10600E unbuffered DDR3 ECC up to 1333MHz
2GB (1x2GB) or 4GB (2x2GB)
8 GB
Bus
Width***
X1
Connector
Width
X4
Bus
Number*
16
Device
Number**
0
Form Factor
Notes
Full height, Gen.1, NHP
half length
slot
2
PCI
32 bit
N/A
48
0
Full height & 33MHz/3.3V,
Full-length
NHP
slot
3
PCIe
X4
X8
32
0
Full height & Gen.1, NHP
Full-length
slot
4
PCIe
X16
X16
1
0
Full height & Gen.2, NHP
Full-length
slot
*Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with
the lowest bus).
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 3
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Storage Controller
Integrated 6 ports SATA controller (4 ports available for Hard Disks)
NOTE: Transfer rate: 3 Gb/s SATA.
Storage
Optical Drive
Hard Drives
HP Half-Height SATA DVD-ROM Optical Drive ships standard
1x250 GB NHP SATA 7200 rpm Drive (Base Model)
2x250 GB NHP SATA 7200 rpm Drive (Performance Model)
Maximum Internal
Storage
Non-Hot Plug SAS
Non-Hot Plug SATA
1.8TB (4 x 450GB) 3.5" SAS
3.0TB (4 x 750GB) 3.5" SATA
Interfaces
Parallel
Serial
Pointing Device (Mouse,
PS2)
Graphics
Keyboard (PS2)
0
1
1
1
1
USB 2.0 Ports
8 total (4 rear, 2 front panel, 2 internal (one for USB Tape connectivity))
NOTE: 1 Dedicated USB port available for internal USB tape connectivity
NOTE: Please see the following URL for additional information regarding USB support
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
Network RJ-45
1(10/100/1000 bits/s)
(Ethernet)
Remote Management
HP ProLiant Onboard Administrator (powered by the HP Integrated
Lights-Out 100i)
Graphics
64MB shared supporting all display resolutions up to 1600 x 1200 16bpp @ 75Hz
NOTE: 8MB is dedicated to video memory.
Form Factor
Micro ATX Tower (4U)
NOTE: Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see
the options section in this QuickSpecs.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 4
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Embedded
Manageability
HP ProLiant Onboard
Administrator and
LO100i Advanced
HP ProLiant Onboard Administrator Powered by LO100i Lights-Out 100
with Optional LO100i Advanced Licenses for Virtual KVM and Virtual
Media.
Features:
Embedded IPMI standard reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
DCMI 1.0 compliant
IPMI 2.0 compliant
Secure Socket Layer Encryption
Secure Shell Encryption
Virtual media (Floppy, CD, DVD, ISO image, USB 2.0) with
Advanced License
Virtual KVM with Advanced License
NOTE: For more information, please refer to the QuickSpecs for the
LO100i found at: www.hp.com/go/lo100
Core Infrastructure
Management
HP ProLiant ML110 G6
Easy Set-up CD
The HP ProLiant Easy Set-up CD optimizes single-server setup,
providing a simple way to deploy reliable and consistent server
configurations. The HP ProLiant 100 Series Easy Set-up CD ships
standard with the ML110 G6.
It offers essential single-server deployment tools for HP ProLiant 100
series servers that simplify HP entry server setup, providing a
repeatable way to deploy reliable and consistent single-server
configurations. The HP ProLiant Easy Set-up CD assists with the OS
installation process by preparing the system for installing "off-the-shelf"
versions of Windows operating system software and automatically
integrating optimized HP ProLiant server software drivers and utilities.
Users enjoy the following benefits:
An easy-to-use, intuitive graphical interface that prepares your
system for the OS installation process.
Integration of key server software drivers with assisted
installation.
Dependency and validity checks to ensure that all supported
ProLiant software can be installed.
NOTE: For the latest information about other related software; please
visit the HP Insight Control Management Software Portfolio at:
http://h18004.www1.hp.com/products/servers/management/ and the HP
ProLiant Easy Set-up CD Web site at: www.hp.com/servers/easysetup
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 5
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Industry Standard
Compliance
ACPI V3.0a Compliant
PCI 2.3 Compliant
PXE Support
WOL Support
IPMI 2.0 compliance
Microsoft® Logo certifications
Red Hat Enterprise Linux Logo certifications
SUSE Linux Enterprise Server Logo certifications
USB 2.0
Manageability
HP ProLiant Onboard Administrator Powered by HP Integrated Lights-Out 100i with optional
LO100i Advanced Licenses for Virtual KVM and Virtual Media.
Embedded Lights Out 100 IPMI 2.0 standard reporting
Standard HP ProLiant ML110 G6 Easy Set-Up CD
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
HP Insight Management Agents and Insight Management Providers for Systems Insight Manager
(SIM) Integration
Security
Power-on password
Setup password
Secure Sockets Layer (SSL)
Secure Shell (SSH)
Security - Trusted
Platform Module
(Optional)
The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used
to authenticate the server platform. These artifacts can include passwords, certificates and
encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user
data and to ensure that a server running Windows Server 2008 has not been tampered with while
the system was offline.
NOTE: For more information about TPM, including a white paper, go to: www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or
losing the key could result in data loss.
Server Power Cords
6' country specific, lowline NEMA power cord.
Power Supply
300 Watts Non-Hot Plug, Non redundant Power Supply (80% efficiency)
System Fans
One (1) - Non-redundant system fan shipped standard
One (1) - Non-redundant CPU heatsink fan shipped standard
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 6
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Operating Systems and Microsoft Windows Server
Virtualization Software Red Hat Enterprise Linux (RHEL)
Support for ProLiant
SUSE Linux Enterprise Server (SLES)
Servers
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/supportos and our driver download page
http://www.hp.com/support/ML110G6
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and/or storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging and custom packaging HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers, as well as, the MSAxxxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to: http://www.hp.com/go/factory-express
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
Service and Support
HP Care Pack Services provide total care and support expertise with committed response
designed to meet your IT and business needs.
HP Care Pack Services include HP branded hardware options qualified for the server, purchased
at the same time or afterwards, internal to the enclosure, as well as 22" and smaller external
monitors and rack mounted UPS options. HP Uninterruptible Power Systems will be covered at
the same service level and coverage period as the server. Coverage of UPS Battery is not
included and standard warranty terms & conditions apply For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who
thoroughly understands your server technology and systems environment. HP Services, an
industry leader in provision of multi vender support solutions provides a range of support services
designed to meet the varying needs of business. Whether an SMB or large global corporation HP
has a ProLiant server support offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and
management.
Support Service - 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service - Hardware Installation only
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service - Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 7
QuickSpecs
HP ProLiant ML110 Generation 6
Standard Features
Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP
holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 8
QuickSpecs
HP ProLiant ML110 Generation 6
Models
SATA Models
Performance model
Processor
(1) Intel® Xeon® processor X3450 (2.66GHz, 95W, 8MB, 1333, HT,
Turbo 1/1/4/4)
8MB Intel® Smart Cache
4GB (2x2GB) PC3-10600E DDR3 UB ECC
HP Embedded 6 Port SATA Controller (4 ports for HDD)
2 x 250GB Non-hot-plug LFF SATA
Non-Hot Plug SATA: Maximum 3.0TB (4 x 750GB)
300W Non-Hot Plug, Non-Redundant Power Supply (80% efficiency)
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
HP Half-Height 16x SATA DVD-ROM
None ships standard
Micro ATX Tower (4U)
HP ML110 G6 X3450
NHP SATA Server
506668-xx1
Cache Memory
Memory
Storage Controller
Hard Drive
Internal Storage
Power Supply
Networking
Management
Optical Drive
Mouse & Keyboard
Form Factor
Base Model
Processor
HP ML110 G6 X3430
NHP SATA Server
506667-xx1
Cache Memory
Memory
Storage Controller
Hard Drive
Internal Storage
Power Supply
Networking
Management
Optical Drive
Mouse & Keyboard
Form Factor
(1) Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo
1/1/2/3)
8MB Intel® Smart Cache
2GB (1x2GB) PC3-10600E DDR3 UB ECC
HP Embedded 6 Port SATA Controller (4 ports for HDD)
1 x 250GB Non-hot-plug LFF SATA
Non-Hot Plug SATA: Maximum 3.0TB (4 x 750GB)
300W Non-Hot Plug, Non-Redundant Power Supply (80% efficiency)
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
HP Half-Height 16x SATA DVD-ROM
None ships standard
Micro ATX Tower (4U)
Country Code Key
XX=00
XX=01
XX=03
XX=04
XX=05
XX=37
XX=42
XX=AA
NA
Australia
UK
Germany
France
AP
Euro
PRC
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 9
QuickSpecs
HP ProLiant ML110 Generation 6
Configuration Information-Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE: Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
Models
HP ProLiant ML110G6 CTO Chassis
Factory Integrated Models ship with:
Embedded NC107i PCI Express Gigabit Ethernet Server Adapter
Integrated HP ProLiant 100 G6 Lights Out 100i Remote Management
Embedded SATA controller
Easy set up CD
PCA
Power cord
Micro ATX Tower (4U)
510078-B21
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors
Quad-Core Processor
Intel® Xeon® processor X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5),
FIO
Intel® Xeon® processor X3450 (2.66GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4),
FIO
Intel® Xeon® processor X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3),
FIO
Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3), FIO
578348-L21
578347-L21
578346-L21
578345-L21
Memory
HP 2GB 2Rx8 PC3-10600E-9 Kit
HP 1GB 1Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
500670-B21
500668-B21
Optical Drive
HP Half-Height SATA DVD ROM Kit
HP Half-Height SATA DVD-RW Optical Kit
447326-B21
447328-B21
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 10
QuickSpecs
HP ProLiant ML110 Generation 6
Configuration Information-Factory Integrated Models
Hard Drives
Storage Controllers
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives require the Non-Hot Plug Internal
SAS/SATA 4 port Cable kit (P/N 487734-B21) and a HP SAS/Smart Array
Controller.
HP 450GB 3G SAS 15K 3.5" DP NHP ENT
HP 300GB 3G SAS 15K 3.5" DP NHP ENT
HP 146GB 3G SAS 15K 3.5" DP NHP ENT
SAS Controller
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS
controller.
NOTE: Support for RAID levels requires selection of a SAS controller.
Smart Array P212 Controller
HP P212/256 MB Smart Array Controller FIO Kit
462595-B21
458941-B21
458939-B21
458947-B21
454234-B21
417950-B21
417855-B21
491191-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 11
QuickSpecs
HP ProLiant ML110 Generation 6
Core Options
NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional
information.
Memory
HP 2GB 2Rx8 PC3-10600E-9 Kit
500670-B21
HP 1GB 1Rx8 PC3-10600E-9 Kit
500668-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
Optical Drives
HP Half-Height SATA DVD ROM Kit
HP Half-Height SATA DVD-RW Optical Kit
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, and firmware) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: Support for SAS non-hot plug drives require the Non-Hot Plug Internal
SAS/SATA 4 port Cable kit (P/N 487734-B21) and a HP SAS/Smart Array
Controller
HP 450GB 3G SAS 15K 3.5" DP NHP ENT
HP 300GB 3G SAS 15K 3.5" DP NHP ENT
HP 146GB 3G SAS 15K 3.5" DP NHP ENT
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
Communications
HP NC112T PCI Express Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC373T PCI Express Multi-function Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multi-function Gigabit Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
447326-B21
447328-B21
462595-B21
458941-B21
458939-B21
458947-B21
454234-B21
417950-B21
417855-B21
503746-B21
412648-B21
394791-B21
458492-B21
Page 12
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
Remote Management HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
For additional License Kits please see the Lights-Out 100i QuickSpecs at:
www.hp.com/go/lo100.
530521-B21
Port Option
HP NHP Internal SAS/SATA 4 port cable kit
NOTE: SAS non-hot plug drives require the Non-Hot Plug Internal SAS/SATA 4
port Cable kit (P/N 487734-B21) and a HP SAS/Smart Array Controller.
487734-B21
Security
HP Trusted Platform Module Option Kit
488069-B21
Storage Controllers
SAS Controllers
NOTE: Support for SAS hard drives/tape drive requires selection of a SAS
controller.
NOTE: Support for any RAID level requires selection of a SAS controller.
Smart Array P212 Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256MB Controller
Optional Upgrades
256 MB Cache Module
Battery Kit upgrade
NOTE: Required to enable BBWC on the 256MB cache.
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Smart Array P212 Controller)
SCSI HBA
HP SC11Xe U320 Host Bus Adapter
NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18004.www1.hp.com/products/quickspecs/12566_div/12566_div.html
(SC11Xe HBA)
Backup & Recovery
Software
Data Protector Express
HP Data Protector Express 4.0 SP1 Backup Server
HP Data Protector Express 4.0 SP1 for Microsoft Small Business Server
HP Data Protector Express Backup Server 4.0 SP1Upgrade from Data Protector
Express Single Server Edition
NOTE: Only of these Data Protector Express base products is required. For
more information on Data Protector Express and to see available options please
visit: http://www.hp.com/go/dataprotectorexpress
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
462828-B21
462834-B21
462968-B21
462969-B21
412911-B21
BB117BA
BB118BA
BB117BT
Page 13
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
Tape Storage
Tape Drives
USB Tape Drives
HP StorageWorks DAT 40 USB Internal Tape Drive
HP StorageWorks DAT 72 USB Internal Tape Drive
HP StorageWorks DAT 160 USB Internal Tape Drive
HP StorageWorks DAT 320 USB Internal Tape Drive
SAS Tape Drives
NOTE: Installation of SAS tape drives requires a SAS controller kit (PN: 491191B21).
HP StorageWorks DAT 160 SAS Internal Tape Drive
HP StorageWorks DAT 320 SAS Internal Tape Drive
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
SCSI Tape Drives
NOTE: Installation of SCSI tape drives requires a SCSI controller kit (PN:
412911-B21).
HP StorageWorks DAT 40 SCSI Internal Tape Drive
HP StorageWorks DAT 72 SCSI Internal Tape Drive
HP StorageWorks DAT 160 SCSI Internal Tape Drive
NOTE: For complete listing of tape drive offerings see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
Disk-Based Backup
RDX Removable Disk Backup
HP StorageWorks RDX160 Internal Removable Disk Backup System
NOTE: 160GB of Disk Storage.
HP StorageWorks RDX320 Internal Removable Disk Backup System
NOTE: 320GB of Disk Storage.
HP StorageWorks RDX500 Internal Removable Disk Backup System
NOTE: 500GB of Disk Storage.
NOTE: Please see the HP RDX Removable Disk Backup System QuickSpecs
for additional information:
http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html
D2D Backup
HP StorageWorks D2D2502i Backup System
NOTE: 2 TB raw capacity/1.5 TB useable capacity.
NOTE: The D2D Backup System are network connected backup products
compatible with Windows and Linux. Connectivity using iSCSI protocol over
Ethernet network. Gigabit Ethernet recommended. If the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional
information: http://www.hp.com/go/d2d
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
DW022A
DW026A
Q1580A
AJ825A
Q1587A
AJ830A
DW085A
EH847A
C5686C
Q1522B
Q1573A
AJ765A
AJ767A
AJ934A
EJ001A
Page 14
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
Uninterruptible Power HP Tower UPS
Systems
HP T750 G2 UPS Models
HP T750 G2 UPS, INTL
HP T750 G2 UPS, NA
HP T750J UPS, Japan
HP T1000 G3 UPS Models
HP T1000 G3 UPS, INTL
HP T1000 G3 UPS, NA
HP T1000J UPS, Japan
HP T1500 G3 UPS Models
HP T1500 G3 UPS, INTL
HP T1500 G3 UPS, NA
HP T1500J UPS, Japan
NOTE: For additional information regarding HP Uninterruptable Power Systems,
please see the following URL: www.hp.com/go/rackandpower (Worldwide)
HP Rack Series
HP KVM Switch
Options
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications
such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower (Worldwide)
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
NOTE: For additional information regarding KVM Switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: http://www.hp.com/go/kvm.
HP Rack Options
HP Tower to Rack Conversion Tray, Universal Kit
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
AF447A
AF446A
AF456A
AF449A
AF448A
AF457A
AF451A
AF450A
AF458A
AF034A
AF038A
AF044A
AF045A
AF611A
AF612A
AF613A
417705-B21
Page 15
QuickSpecs
HP ProLiant ML110 Generation 6
Additional Options
USB Options
HP ProLiant Server Mouse
HP ProLiant Server Keyboard
HP USB 2-Button Optical Mouse ALL
HP USB 04 Standard Keyboard
USB Floppy Drive, External
NOTE: For the installation of Windows and other OS's, a floppy drive or the HP
USB Floppy Drive Key may be required to complete driver installation. A
standard USB drive key may not work to complete driver installation.
Service and Support Hardware Services Next Business Day On-Site Service
Offerings
9-Hour x 5-Day Coverage, 3 Years, Electronic
(HP Care Pack Services)
Hardware Services - 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
24-Hour x 7-Day Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-Site Service
6-Hour Call to Repair, On-Site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
AC105A
AC110A
DC172B
DT528A#xxx
DC361B
U4433E
U4434E
U4435E
U4436E
U4444E
Page 16
QuickSpecs
HP ProLiant ML110 Generation 6
Memory
HP ProLiant ML110 G6 Models
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
SATA Models:
2GB or 4 GB of PC3-10600E DDR3 UDIMM running up to 1333MHz with memory kits installed.
Standard Memory with Optional Memory
Up to 8GB of memory is available with the installation of standard and optional memory, 4x 2 GB PC3-10600E un-buffered
ECC DDR3 SDRAM DIMM Memory kits.
NOTE: The below chart does not represent all possible memory configurations.
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1C and 3D are
interleaving pair. Slots 2A and 4B are interleaving pair).
Memory
Standard (Base
Model)
Standard
(Performance
Model)
Maximum
Slot
2 GB
DIMM1C
Empty
DIMM2A
2 GB
DIMM3D
Empty
DIMM4B
Empty
4 GB
Empty
2 GB
Empty
2 GB
8 GB
2 GB
2 GB
2 GB
2 GB
Following are memory options available from HP:
HP 2GB 2Rx8 PC3-10600E-9 Kit
HP 1GB 1Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules
and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memoryconfigurator.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
500670-B21
500668-B21
Page 17
QuickSpecs
HP ProLiant ML110 Generation 6
Storage
1.
1st removable media drive
2.
2nd removable media drive
3.
4th SAS/SATA hard drive
4.
3rd SAS/SATA hard drive
5.
2nd SAS/SATA hard drive
6.
1st SAS/SATA hard drive
7.
HDD spare screws
8.
Removable media drive spare screws
Drive Support
Removable Media
DVD Drive
DVD-RW Drive
Quantity
Supported
Position
Supported
2
2
1 or 2
1 or 2
Controller
Integrated SATA
Integrated SATA
Hard Drives (SATA Models only)
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
750GB 3G 7.2K
Up to 4
3,4,5,6
6 Port SATA controller
500GB 3G 7.2K
NOTE: Transfer rate: 3 Gb/s SATA.
250GB 3G 7.2K
NOTE: RAID support requires HP Smart Array P212 Controller.
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
Quantity
Position
Supported
Supported Controller
160GB 3G 7.2K
Up to 4
3,4,5,6
6 Port SATA controller with
NOTE: Transfer rate: 3 Gb/s SATA.
NOTE: RAID support requires HP Smart Array P212 Controller.
Hard Drives (SAS Models only)
SAS - Non-Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: SAS non-hot plug drives require the Non-Hot Plug Internal SAS/SATA 4 port Cable kit (P/N 487734-B21) and a HP
SAS/Smart Array Controller.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 18
QuickSpecs
HP ProLiant ML110 Generation 6
Storage
450GB 3G 15K DP
400GB 3G 10K DP
300GB 3G 15K DP
146GB 3G 15K DP
Quantity
Supported
Up to 4
Position
Supported
3,4,5,6
Controller
Smart Array P212 Controller
NOTE: Transfer rates of drives are dependent on the maximum
transfer rate supported by the Controller. Refer to the
Controller technical specifications for details.
Maximum Storage Capacity - SATA/SAS Models
Internal
SATA
3.0TB (4 x 750GB)
SAS
1.8TB (4 x 450GB)
Tape and Disk-Based Backup
NOTE: Installation of SCSI tape drives requires SCSI HBA controller (PN: 412911-B21).
NOTE: For a complete listing of compatible tape and disk-based backup offerings, please visit: www.hp.com/go/connect.
Position
Supported
Internal USB Tape
Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
DAT 320 USB
External USB Tape
Drives
DAT 40 USB
DAT 72 USB
DAT 160 USB
DAT 320 USB
Internal SAS Tape
Drives
DAT 160 SAS
DAT 320 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
External SAS Tape
Drives
DAT 160 SAS
DAT 320 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
Internal SCSI Tape
Drives
DAT 40
DAT 72
DAT 160
External SCSI Tape
Drives
DAT 40
DAT 72
DAT 160
HP StorageWorks RDX
Removable Disk
Controller
Controller/HBA
Option Kit Part
Number
2
USB 2.0 port
N/A
External
USB 2.0 port
N/A
2
HP Smart Array P212 Controller
462828-B21
External
HP Smart Array P212 Controller
462828-B21
2
HP SC11Xe Host Bus Adapter
412911-B21
External
HP SC11Xe Host Bus Adapter
412911-B21
2
USB 2.0 Port
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
N/A
Page 19
QuickSpecs
HP ProLiant ML110 Generation 6
Storage
Backup System,
Internal
RDX160
RDX320
RDX500
HP StorageWorks D2D
Backup Systems
D2D2502i
D2D2503i
D2D2504i
External
Embedded Network Controller or if the server requires a
hardware iSCSI initiator, the QLogic QLA4050 Host Bus
Adapter is recommended.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
N/A
Page 20
QuickSpecs
HP ProLiant ML110 Generation 6
Power Specifications
Part Number
445067-001
Operational Input Voltage Range 100 to 127 and 200 to 240 V auto ranging
(Vrms)
Frequency Range (Nominal) (Hz)
50 to 60 Hz
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Max. Rated VA (Volt-Amp)
Efficiency (%)
Power Factor
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration
(mS)
100
300
5
400
120
300
5
N/A
200
300
2.5
N/A
230
300
2.5
400
240
300
2.5
N/A
400
80%
0.9
3.5mA
N/A
N/A
80%
N/A
N/A
No component
was damaged
and input fuse
shall not blow
N/A
N/A
80%
N/A
N/A
N/A
400
80%
0.9
N/A
No component
was damaged
and input fuse
shall not blow
N/A
N/A
80%
N/A
N/A
N/A
N/A
N/A
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
N/A
Page 21
QuickSpecs
HP ProLiant ML110 Generation 6
System Specifications
Power **
HP ProLiant ML110 G6 Fully
(see **)
Configured
Fully Loaded System output Wattage 300W
(W)
Fully Loaded System Input Current 5A @ 100V, 2.5A @ 200V
(A rms)
Fully Loaded System Thermal (BTU- 1277BTU
Hr)
Fully Loaded System VA (Volt-Amp) 400 VA
System Leakage with all power
3.5mA@110V
supplies loaded (mA)
3.5mA@220V
System Inrush Current with all power <150A@240Vac
supplies loaded (A)
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided
DIMMs, (4) HDDs, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Power Cords (13 Cord Sets)
Country
Taiwan
Japan
India
Brazil
Australia
Euro
PRC
UK
US
ITL
Power Cord Part Number
393312-001
139867-005
397138-002
285052-001
100661-001
100614-009
286496-001
100613-008
121565-001
109197-008
NOTE: To review typical system power ratings use the Active Answers HP Power Advisor which is available via the online
tool located at URL: http://www.hp.com/go/hppoweradvisor
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML110 G6
- Click on: "Power Calculator" link. (You may need to scroll down to see it)
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 22
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
System Unit
Dimensions (HxWxD)
(with feet)
Weight (approximate)
Input Requirements
(per power supply)
Power Specifications
Power Supply Output
(per power supply)
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
14.38 x 6.9 x 16.8 in (36.52 x 17.5 x 42.6 cm)
Maximum
30.53 lb (13.85 kg)
(all hard drives, power
supplies, and processors
installed)
Minimum
25.13 lb (11.4 kg)
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
90 to 132 VAC,
180 to 264 VAC
Rated Input Current
5 A (at 100 VAC),
2.5 A (at 200 VAC)
Rated Input Frequency 47 to 63 Hz
Rated Input Power
400 W (at 100 VAC),
400 W (at 200 VAC)
To review typical power ratings use the Power Advisor which is
available via the online tool located at URL:
http://www.hp.com/go/hppoweradvisor
Rated Steady-State
300 W (at 100 VAC),
Power
300 W (at 200 VAC)
Maximum Peak Power 300 W (at 100 VAC),
300 W (at 200 VAC)
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System may shut down if operating with a fan
fault or above 42°C °(107.6°F).
Non-operating
-35° to 65°C (-31° to 149°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10% to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
10% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3048 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
609 m/min (2000 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 609 m/min (2000
ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 23
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
Emissions
Classification (EMC)
HP 250GB 3G SATA
7.2K NHP 3.5" MDL
HDD
458939-B21
250GB 7,200 rpm
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
L WAd
4.32 Bels
24.9 dBA
L pAm
Operating
L WAd
4.41 Bels
L pAm
25 dBA
NOTE: The listed sound levels above apply to standard SATA
configurations. Additional options may result in increased sound levels.
FCC Rating
Class B
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
Capacity
Height
Maximum drive
dimension
Width
Depth
Maximum drive
dimension
Interface
Transfer Rate
(Maximum)
Native Command
Queuing
Seek Time
(typical reads, including
settling)
250 GB
1.028 in. (26.1 mm)
4.00 in (101.6 mm)
5.787 in (147.0 mm)
Serial ATA
3Gb/s
Supported
Single Track
2.0 ms
Average
<8.5 ms
Full-Stroke
21.0 ms
Rotational Speed
7,200 rpm
Physical Configuration Bytes/Sector
512
Logical Blocks
488,397,168
Operating Temperature50° to 95° F (10° to 35° C)
(system inlet air
temperature)
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 24
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
HP Half-Height 16X MaxDisk
SATA DVD-ROM
Optical Drive
Applicable Disk
Capacity
Block Size
Interface
Access Times (typical)
DVD Media
SATA
Random
Full-Stroke
Data Transfer Rate
Sustained
Cache Buffer
128 KB
Start-up Time (typical) < 7 seconds
Stop Time
< 4 seconds
Laser Parameters
Type
Operating Conditions
Dimensions
Wave Length
Temperature
Humidity
(HxWxD, maximum)
Weight
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R, CD-RW, DVD-ROM, DVD+R,
DVD+RW
4.7 GB (DVD-5)
8.54 GB (DVD-9)
2,048 bytes
3Gb/s
<140 ms
<250 ms
8100 to 21600 KB/s (6X to 16X)
Semiconductor Laser GaA1As
780 ± 25 nm
41° to 122° F (5° to 50° C)
10% to 90%
1.7 x 5.85 x 8.11 in (42.9 x 150 x 195 mm)
2.64 lb (1.2 kg)
Embedded NC107i PCIe Network Interface
Gigabit Server Adapter
(Embedded)
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method Compliant to x1 PCIe Specification
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half100 Mb/s
Duplex)
100Base-TX (Full200 Mb/s
Duplex)
1000Base-TX (Half and 2000Mb/s
Full-Duplex)
Connector
RJ-45 connector
Cable Support
Performs all the physical layer functions for 10BASE-T, 100BASE-T,
and 1000BASE-T Ethernet on standard Category 5 UTP
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 25
QuickSpecs
HP ProLiant ML110 Generation 6
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13477 Worldwide QuickSpecs — Version 2 — 12.11.2009
Page 26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising