50ω rg 58 cable assemblies
RF-16
RF058–01SP1–01SP1–0100
RF058–05SR3–05SR3–0100
RF058 SERIES
50Ω RG 58 CABLE ASSEMBLIES
SPECIFICATIONS
20 AWG
RG 58 coax cable
Mates with:
TNC, SMA, NTPE
For complete specifications
see www.samtec.com?RF058
RF Connector:
Outer Contact Material:
Ni plated Brass (TNC, N Type),
Au plated Ni (SMA)
Center Contact Material:
Au plated Ni (TNC, N Type),
Au plated Brass (SMA)
Insulator Material:
PTFE
Insulator Resistance:
5,000 MΩ
Frequency Range:
0~1 GHz
Impedance:
50Ω
RoHS Compliant:
Yes
RG 58 Cable:
Impedance:
50Ω
Capacitance:
101pF/meter
Max Attenuation
(cable only):
0.8dB @ 1 GHz
Conductor Size:
20 AWG, (0.90 mm) .036" dia.
Conductor Material:
Tinned Copper
Insulator Diameter:
(2.95 mm) .116"
Insulator Material:
Solid Polyethylene
Shield Material:
Tinned Copper
Jacket Material:
PVC
Jacket Diameter:
(4.95 mm) .195" dia.
Bend Radius:
48.3 mm
Jacket Temp Rating:
-40˚C to +85˚C
RoHS Compliant:
Yes
THINK OUTSIDE THE CATALOG
• Create a full system:
cable assembly
and board
level mates,
50Ω and
75Ω
solutions
• 24-hour
samples
on standard
products
• Visit: rf.samtec.com
RF058
Single or Double
Ended
SMA, TNC or N Type
end options
END 1
CONNECTOR
END 2
CONNECTOR
OVERALL
LENGTH
–“XXXX”
Specify END OPTIONS from chart
= Overall Length
in millimeters
–0100 (100 mm) 3.94"
minimum
END OPTIONS
–01SP1 = SMA
Straight Plug
(30µ" (0.76 µm) Gold
on Center Contact,
Gold Flash on Outer
Contact and Shell)
–05SR3 = TNC
Reversed Polarity
Straight Plug
(10µ" (0.25 µm) Gold
on Center Contact,
Nickel on Shell)
ALSO AVAILABLE
(MOQ Required)
• Additional stripping and
tinning options
• Additional plating options
• Additional end
connector options
Contact Samtec.
XXXX =
OAL
(millimeters)
–06SP3 = N Type
Straight Plug
(10µ" (0.25 µm) Gold
on Center Contact,
Nickel on Shell)
STRIPPED & TINNED
(Dimensions in mm)
–01BJ1 = SMA
Straight Bulkhead Jack
–01SB1 = SMA
Straight Bulkhead Jack, Sealed
(30µ" (0.76 µm) Gold on
Center Contact, Gold Flash
on Outer Contact and Shell)
–SING =
Single Ended
(End 2 Callout)
OTHER
SOLUTIONS
• Cable connector kits
(see cable components
catalog pages)
–XXXXXX =
Stripped & Tinned
(End 2 Callout)
CALLOUT
–303030
–303040
–403030
–403040
–404040
C
–05SR3–01SP1
SHOWN
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
B
A
A
3.0
3.0
4.0
4.0
4.0
B
3.0
3.0
3.0
3.0
4.0
C
3.0
4.0
3.0
4.0
4.0
Both center conductor and
braid shield are stripped,
only the center
conductor is tinned.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising