MD-119 Series
Marine Displays and Computers
MD-119 Series
19-inch type approved ECDIS marine display, 1280 x 1024 resolution
››19-inch screen, 4:3 aspect ratio, 1280 x 1024 resolution
››LED backlighting
››Full range dimming, optional optical bonding
››Touch screen models available
››Dual-power supply (AC 110V-230V, DC 24V)
››Picture-in-Picture and Picture-by-Picture display
››ECDIS color calibration (optional)
Overview
The MD-119 is the 19-inch version of our marine display series.
Designed for durably reliable service as an ECDIS display component,
the MD-119 has a 4:3 aspect ratio with 1280 x 1024 pixel resolution,
alongside full range dimming and optional optical bonding, making
them well-suited not only for ECDIS applications, but for a variety of
other bridge applications, as well.
PBP (picture-by-picture) functions, allowing for multiple display
configurations that may be tailored to a variety of situations. Finally,
with both AC and DC power inputs, the MD-119 may be conveniently
installed on any bridge, without the need for extra hardware.
Moxa’s marine displays are compliant with the most important
industrial marine standards, such as IEC 60945, DNV, and IACS-E10,
giving strong assurance of their suitability for marine applications.
The MD-119 further comes with PIP (picture-in-picture) and
Appearance
OSD Control Buttons
RS-232/422/485
Port x 2 (1 reserved)
Ground
Connector
1
USB Host
(optional)
Buzzer
Connector
VGA Output
DVI-I Input x 2
DC Power
Input
BNC
AC Power
Composite x 3 Input/Output
w w w. m o x a . c o m
info@moxa.com
Marine Displays and Computers
483 (19.02)
Unit: mm (inch)
82 (3.23)
444 (17.48)
Dimensions
Specifications
Display
Panel Size: 19”
Aspect Ratio: 4:3
Pixels: 1280 x 1024
Pixel Pitch (RGB): 0.294 (H) x 0.294 (V) mm
Response Time: 5 ms (gray to gray)
Contrast Ratio: 1000:1
Light Intensity: 350 cd/m²
Viewing Angles: 85° x 80° (right-left/up-down)
Active Display Area: 376.32 (H) x 301.06 (V) mm / 14.81 (H) x 11.85
(V) in
Max Colors: 16.7M (8 bit)
Display Interface: VGA output x 1, DVI-I input x 2, BNC composite x 3
Resolution:
• VGA: 640 x 480
• SVGA: 800 x 600
• XGA: 1024 x 768
• SXGA: 1280 x 1024
Serial Interface
Serial Standards: 1 software-selectable RS-232/422/485 ports (DB9,
male), 1 mfr reserved for flashing firmware
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: XON/XOFF, ADDC® (automatic data direction control)
for RS-485
Baudrate: 9600 Kbps
Serial Signals
RS-232: TxD, RxD, DTR, DSR, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Physical Characteristics
Housing: Aluminum sheet metal
Weight: 9.7 kg
Dimensions: 82 x 483 x 444 mm (3.23 x 19.02 x 17.48 in)
Mounting: Flush mounting
Environmental Limits
Operating Temperature: -15 to 55°C (5 to 131°F)
Storage Temperature: -20 to 60°C (-4 to 140°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-Vibration:
• IEC 60945
• DNV 2.4, Class A/Class C
Power Requirements
Input Voltage:
• 24 VDC (with tolerance from 18 to 36 VDC, 2-pin terminal block)
• 115 to 230 VAC, 50/60 Hz
Power Consumption: 42 W
• 1.75 A @ 24 VDC
• 0.38 A @ 110 VAC
Standards and Certifications
Safety: UL/cUL, CCC (pending)
EMC: EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4,
FCC Part 15 Subpart B Class A
Marine: IEC 60945 4th (pending), DNV (pending), IACS-E10 (pending)
Green Product: RoHS, cRoHS, WEEE
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer) supporting
1-255 levels for time interval system reset, software programmable
MTBF (mean time between failures): 39,675 hrs
Warranty
Warranty Period: 1 year
Details: See www.moxa.com/warranty
Front Panel
LEDs: Storage, Power
OSD: 5 x OSD control
USB: 1 USB 2.0 host for touch screen function (optional)
2
w w w. m o x a . c o m
info@moxa.com
Marine Displays and Computers
We recommend taking the following precautions to minimize heat
build-up within the display:
• Position the display within ±40° of the vertical.
• Install an external fan to increase airflow upwards through the
display if (a) the display is not positioned within ±40° of the
vertical, (b) the operating temperature exceeds 25°C, or (c) the
display is used in a location with minimal ventilation.
Important Safety Precaution:
Even though the display is rated to operate within the IEC 60945
standard of -15 to 55°C for bridge applications, it is best to ensure
that the operating temperature does not exceed 25°C. Doing so will
increase the life of your display and minimize service costs.
Ordering Information
Available Models
Package Checklist
MD-119-X1: 19-inch type approved ECDIS marine display with 4:3 aspect ratio, 1280 x 1024 resolution, LED • MD-119-X1 display
backlighting, tape bonding, and dual AC/DC power supplies
• DVI to VGA adapter
• VGA Cable
• DVI-D Cable
• Console Mounting Kits
• DC terminal block (for powering
device)
• DC terminal block (for powering
the buzzer)
• Documentation and driver DVD
• Quick installation guide (printed)
• Warranty card
3
© Moxa Inc. All Rights Reserved. Updated Apr. 9, 2013. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising