About the camcorder
BATTERY CHARGER (Model: R11AH)
With this external battery charger, you can charge the approved batteries directly without plugging it into the
notebook.
About the Battery Charger
REAR VIEW
FRONT VIEW
Charging bays
DC-OUT cable
DC-IN jack
LED indicators

DIMENSIONS: 151.96mm x 165.30mm x 70.00mm

WEIGHT: 546g
LED Indicators
Icon
Item
Battery indicator
/

LED Color and Status
Green
Charging complete
Orange
Battery charging
Red
Charging error
Off
No battery is inserted
The Green LED lights up when the battery is at 95% charged. For 100% fully charged
pack, user will need to leave the pack to be charged for longer.
Power indicator
Green
19V DC power is supplied
Off
No power supply
Using the Battery Charger
1.
2.
Connect the charger unit to an electrical outlet using the power adapter.
Insert battery into the designated charging bay.
CHAIN CONNECTION
(Charging sequence)
Charger has two charging bays and can support
chain connection to another charger using the
attached DC-OUT cable, for at most up to total of 3
chargers.
When chargers are connected, the charging starts
from the last charger of the chain. (The charging
sequence is shown in the right figure: 1-1, 1-2, 2-1,
2-2, 3-1, 3-2)


Normal charging time will vary by the capacity of
the battery pack.

To fully charge 2 battery packs on a single
charger will need around 2.5 hours.

To fully charge 4 battery packs on 2 chain-connected chargers will need around 5 hours.

To fully charge 6 battery packs on 3 chain- connected chargers will need around 7.5 hours.

NOTE
•
Use only the designated power adapter (19V/65W) to avoid damage to the charger.
•
Charging time may vary depending on the remaining battery capacity.
62+009662+00
Copyright© 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising