IP Video Gateway
Data Sheet
Cisco DCM Series D9901
Digital Content Manager – IP Video Gateway
Today’s video contribution networks are evolving rapidly with the dual drivers of
increased demand, for high-definition TV, and a need for reduced cost of ownership. The
Cisco® DCM Series D9901 Digital Content Manager (DCM) IP Video Gateway is a
compact 1 RU SDI Video Gateway platform capable of supporting the delivery at full
quality, a high number of uncompressed video signals over cost-effective Ethernet links.
Figure 1.
Cisco DCM Series D9901 IP Video Gateway
The DCM Series D9901 IP Video Gateway provides IP-encapsulation of uncompressed SD and HD
SDI video. At the transmitter site, the DCM Series D9901 IP Video Gateway enables SDI video to
be carried over 1 GbE or 10 GbE and at the receiving site, the DCM Series D9901 IP Video
Gateway converts the IP-encapsulated stream back to a baseband SDI video signal.
Due to its quality, flexibility, and very compact design, the DCM Series D9901 IP Video Gateway is
adaptable for a wide range of applications, such as professional broadcast contribution, studio-tostudio media exchange, in-house signal distribution and routing, post-production, live event
coverage, etc.
As IP is becoming more and more the transport network of choice, provisions are required to
maximize quality of service. The DCM Series D9901 IP Video Gateway’s extensive set of IP over
GbE features including extensive protocol support allows for a seamless integration with these IP
networks.
Physical Configuration
The DCM Series D9901 IP Video Gateway comes in a compact 1 RU chassis. The unit can be
configured with up to two gateway cards, with each card having dual GbE ports and up to six SDI
video ports.
Page 1 of 9
Data Sheet
The gateway cards can be individually configured with either electrical video interfaces or optical
video interfaces, or a combination of both. With electrical interfaces, it can be equipped with either
6 electrical SDI inputs, or 6 electrical SDI outputs, or the combination of 3 SDI inputs and 3 SDI
outputs. With optical interfaces, it can be equipped with either 6 optical ports, or a combination of 3
optical SDI ports and 3 electrical SDI ports (either 3 inputs or 3 outputs). The optical ports are
based on unidirectional video SFPs. The user will define the port direction by plugging in either a
receiver SDI SFP or a transmitter SDI SFP.
Each gateway card is equipped with a main and a backup Ethernet port. The ports are software
switchable to function as either 1 GbE or 10 GbE. With 1 GbE, the ports can be equipped with SFP
connectors giving each card a total throughput of 1 Gbps bidirectional. With 10 GbE, the ports can
be equipped with SFP+ connectors, giving each card a total throughput of 10 Gbps.
Scalable platform
The DCM Series D9901 IP Video Gateway has been designed to provide processing of up to 12
video signals. However, the platform is scalable in hardware as well as in software. The chassis
can be equipped with one card only, and a basic card always comes with one standard definition
video stream enabled. In case the physical configuration is 3 inputs and 3 outputs, the operator can
freely select either to transmit or receive a video stream over IP. The operator can choose to
enable additional video signals to be processed over time as well as to high-definition video and 10
GbE via software licenses. The capital expenses can therefore be adapted to existing and future
needs as more video streams are needed.
Redundancy and Reliability
The DCM Series D9901 IP Video Gateway has been designed to allow operators to configure
highly-reliable networks. The DCM Series D9901 IP Video Gateway supports hot-swappable and
redundant power supplies and hot-swappable cooling fans. In addition, each DCM Series D9901 IP
Video Gateway card is also hot-swappable.
The DCM Series D9901 IP Video Gateway can be configured in a hot 1:1 configuration to support
maximum uptime with minimum switchover interruption.
User Interface and Management
The DCM Series D9901 IP Video Gateway is controlled via an easy and intuitive GUI. To keep
things simple, there is no software to load on the user’s computer. The GUI of the DCM Series
D9901 IP Video Gateway is a HTML-based user interface that can be opened using Microsoft
Internet Explorer 6.0 and higher or Firefox 3.0. The GUI supports simple program provisioning
through drag-and-drop functionality. The interface provides detailed information to the user,
showing the DCM Series D9901 IP Video Gateway configuration, input and output bit rate
monitoring, video stream alarms, and other information. For easy access to details, sorting of video
service information can be performed on various criteria, including input and output ports, bit rates,
and video service names.
For integrated network monitoring and control, the DCM Series D9901 IP Video Gateway is
integrated with ROSA® Network Management and Control (NMC) system. All functionality available
via the HTML interface is available with the ROSA control system.
Page 2 of 9
Data Sheet
Features
Interfaces
●
Up to 12 video interface ports (6 video ports per gateway card)
◦ Each card can have a combination of 3 inputs and 3 outputs or 6 inputs or 6 outputs
◦ The video interfaces can be either electrical (BNC) or optical (video SFP), or combined in
sections of 3 electrical and 3 optical
●
Flexible video signal monitoring
◦ Each card has a dedicated electrical monitor output, which can mirror any of the 6 video
ports selected by the user
◦ Any video output port can also be configured as a monitor of another active video output
port or input port
●
Each gateway card is equipped with dual Ethernet ports capable of either 1 GbE
(connectors: SFP) or 10 GbE (connectors: SFP+)
◦ Unicast and multicast support
◦ Protocols supported: 802.3, Ethernet, RTP, UDP, IP, ARP, ICMP, IGMPv2 / v3, VLAN
◦ Quality of Service: Diffserv/TOS 802.1p
Video signals & formats
●
Standard definition 625i25 and 525i29.97
●
High-definition 720p50, 720p59.94, 1080i25, 1080i29.97
●
Adaptive clock recovery – no need for external reference
●
Built-in SDI signal generators assist in easy set-up of the gateway during installation without
the need for a dedicated signal generator
Redundancy
●
1:1 Redundant configuration supported
●
1:1 GbE port backup supported
●
Dual Streaming mode (IP Port mirroring)
●
Video input ports can act as backup inputs for each other
System
●
User hot swappable power supplies, fans and gateway cards
●
Redundant load sharing power supplies, supports both AC and DC power supplies
●
Configuration settings stored on Compact Flash card (transferable to cold standby unit)
●
Configurations can also be copied through the user interface from either one chassis to
another or from one Gateway card to another
Management
●
SNMP traps
●
ROSA management
●
Easy control using web browser
●
Ethernet interface for communication with management system and web browser
●
IPsec
Page 3 of 9
Data Sheet
Anticipated Future Software Features
●
3G HD Video – 1080p50, 1080p60
●
Gen-lock to external reference with adjustable phase
●
FEC & Hitless switchover
●
ASI transparent transport
Anticipated Future Factory Options
●
JPEG2K compression engine
Anticipated software and hardware features/releases described herein are in varying stages of
development and are subject to change at the sole discretion of Cisco without liability to Cisco.
Contact Cisco for estimated commercial availability.
Page 4 of 9
Data Sheet
Product Specifications
Table 1.
Product Specifications
Specification
Value
Video Interfaces
Number of video ports per card
Up to 6 ports
In addition:
• Loop-through output: can monitor any active input or output video
stream
• Reference input: common to all the video outputs on one gateway card
(see Note 1)
Note: Any output port can also be configured as a monitor of another active
video output port or input port.
Hardware configuration of ports
Electrical: one of the following per gateway card
• 3 inputs + 3 outputs
• 6 inputs
• 6 outputs
Optical: one of the following per gateway card
• 6 optical video SFP cages
• 3 optical video SFP cages + 3 electrical inputs
• 3 optical video SFP cages + 3 electrical outputs
Connector type
Video ports
Electrical: BNC (in groups of 3)
Optical: video SFP (for use with video SFP compliant to SMPTE 297)
Reference input
BNC (internally terminated)
Loop-through output
BNC
Impedance
75 Ω
Video formats
Video ports and loop-through output
Standard: SD-SDI
• 625i25, 525i29.97 (SMPTE259-C, Type B)
• Transparency of SDTI @ 270 Mbit/s (SMPTE305)
Option: HD-SDI
• 720p59.94, 720p50 (SMPTE 292 - SMPTE 274 System 2 & 3, Type B)
• 1080i29.97, 1080i25 (SMPTE 292 - SMPTE 274 System 5 & 6, Type B)
Return loss
Video ports and loop-through output
SD: > 15 dB, 5 MHz – 270 MHz
HD: > 15 dB, 5 MHz – 1.485 GHz
Cable length
Video input ports
SD: > 350 m (using RG59/U)
HD: > 200 m (using RG6/U)
Video resolution
10 bit
Page 5 of 9
Data Sheet
IP Interfaces
Number of ports per card
2 Ethernet ports, 1+1 (for redundancy)
Connector type (see Note 2)
Standard 1 GbE:
• Optical or electrical Small Form Factor Pluggable (SFP)
Optional 10 GbE:
• Optical or electrical Small Form Factor Pluggable+ (SFP+)
Interface type
Standard 1 GbE:
• 1 Gigabit Ethernet (GbE) according to IEEE 802.3ab (Electrical) or
IEEE 802.3z (Optical)
Optional 10 GbE:
• 10 Gigabit Ethernet (GbE) according to IEEE 802.3ae
Protocols
IP/UDP/RTP, ARP, IGMPv2/v3, Diffserv/TOS 802.1p
Support for IEEE 802.Q VLAN Tagging
Maximum throughput per gateway card
With 1 GbE interface: 1 Gbps input and 1 Gbps output per gateway card
With 10 GbE interface: 10 Gbps input and output per gateway card
Processing
Video encapsulation
According to RFC3497
Video output synchronization
Advanced Adaptive clock regeneration – no need for external reference
Programmable output control
Transition to a user-selectable monochrome color or 0 VDC in case of loss
of RTP stream
Management and Monitoring
Number of ports on chassis
2
Connector type
RJ-45
Interface type
10/100 & 10/100/1000 BT
Protocols
HTTP, SNMP, IIOP
User interface
Embedded HTML user interface
Environmental Specifications
Operating temperature
0°C – +50°C / +32°F – +122°F
Storage temperature
-40°C – +70°C / -40°F – +158°F
Humidity
5% – 95% (non condensing)
Altitude
-200 – 10,000 feet (-61 – 3048 m)
Power Consumption
Fully loaded
< 165 W
One card (chassis included)
< 100 W
Input Voltage
AC input voltage
Nominal
100 – 240 VAC
Normal service voltage range
90 – 254 VAC
Frequency
47 – 63 Hz
DC input voltage
Nominal
-48 VDC
Normal service voltage range
-38 – -58 VDC
Page 6 of 9
Data Sheet
Chassis Mechanical Specifications
Height
1 RU 1.74 in. / 44 mm
Width
19 in. / 483 mm
Depth
22.13 in. / 562 mm
Weight (fully loaded)
27.6 lbs / 12.5 kg
Cooling
Front to back, forced air: units are stackable
Note:
1. This is currently not active and will be supported in a future release
Note:
2. SFP or SFP+ module not included
Figure 2.
Cisco DCM Series D9901 IP Video Gateway Rear Panel with 2 AC power supplies, 2 gateway
cards with SFP modules applied and electrical video interfaces
Page 7 of 9
Data Sheet
Table 2.
Ordering Information Cisco DCM Series D9901 IP Video Gateway Components
Cisco DCM Series D9901 IP Video Gateway Components
Part Number
DCM Series D9901 IP Video Gateway Preconfigured Unit
DCM Series D9901 IP Video Gateway preconfigured unit (fully assembled and pre-enabled
licenses)
D1xxxxxxxxxxxxxxxx
Call for Part Number
Hardware Upgrades (Boards delivered as separate kits)
DCM SDI GWY – ELECTRICAL: 3 inputs & 3 outputs
4030219
DCM SDI GWY – ELECTRICAL: 6 inputs
4030220
DCM SDI GWY – ELECTRICAL: 6 outputs
4030221
DCM SDI GWY – OPTICAL: 6 ports
4030222
DCM SDI GWY – ELECTRICAL: 3 inputs & OPTICAL: 3 ports
4030223
DCM SDI GWY – ELECTRICAL: 3 outputs & OPTICAL: 3 ports
4030224
DCM blank plate for I/O slot
4008973
DCM blank plate for power supply
4010913
DCM Series D9901 front panel
4025755
Hardware Upgrades (Boards delivered as separate kits)
AC power supply (AC power cord needs to be ordered separately)
4015490
DC power supply
4015491
License Upgrades (Upgrade delivered on a CD-ROM – Note 3)
DCM license upgrade containing one or more of the following licenses:
- Single additional video stream option
(1 license enables one additional video stream in a DCM Series D9901 IP Video Gateway
chassis to be processed over IP, either from video input to RTP stream or from RTP stream
to SDI output. The license is floating across the gateway cards in the chassis.)
403409800001
- SDI GWY HD-SDI Option (for one gateway card)
(1 license provides HD-SDI capability for one entire gateway card. The license is floating
across the gateway cards in the DCM chassis)
403409400001
- 10 GbE Option (for one gateway card)
(1 license provides 10 GbE capability for one gateway card. The license is floating across the
gateway cards in the DCM chassis)
403410000001
AC Power Cords
Argentina
207340
Australia
1000897
China
745415
Europe
3989835
Italy
3993130
Japan
3993133
UK
3989836
US
3989838
Note:
3. License Upgrade CD-ROMs are delivered as one separate CD-ROM per part number.
Page 8 of 9
Data Sheet
Table 3.
Ordering Information SFP Plug-ins (see Note 4)
Cisco DCM Series D9901 Components
Part Number
SFP Plug-ins – WDM types
GbE SFP module 850 nm (LC, up to 500 m)
4002019
GbE SFP module 1310 nm (LC, up to 5 km)
4002020
GbE SFP module 1310 nm (LC, up to 40 km)
4003466
SFP Plug-ins – CWDM types
GbE SFP module 1470 nm (LC, up to 40 km)
4002003
GbE SFP module 1490 nm (LC, up to 40 km)
4002004
GbE SFP module 1510 nm (LC, up to 40 km)
4002005
GbE SFP module 1530 nm (LC, up to 40 km)
4002006
GbE SFP module 1550 nm (LC, up to 40 km)
4002007
GbE SFP module 1570 nm (LC, up to 40 km)
4002008
GbE SFP module 1590 nm (LC, up to 40 km)
4002009
GbE SFP module 1610 nm (LC, up to 40 km)
4002010
GbE SFP module 1470 nm (LC, up to 70 km)
4002011
GbE SFP module 1490 nm (LC, up to 70 km)
4002012
GbE SFP module 1510 nm (LC, up to 70 km)
4002013
GbE SFP module 1530 nm (LC, up to 70 km)
4002014
GbE SFP module 1550 nm (LC, up to 70 km)
4002015
GbE SFP module 1570 nm (LC, up to 70 km)
4002016
GbE SFP module 1590 nm (LC, up to 70 km)
4002017
GbE SFP module 1610 nm (LC, up to 70 km)
4002018
SFP Plug-ins – 1000 BT copper
GbE SFP module 1000 BT copper
4006222
Video SFP Plug-ins
Video SFP 1310 nm – TX
1009647
Video SFP 1310 nm – RX
1009648
Note:
4. All Class 1 SFP plug-ins according to IEC 60825-1 (1997) Amendment 2 (2001)
Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, and ROSA are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document are the property of their respective owners.
Specifications and product availability are subject to change without notice.
© 2009 Cisco Systems, Inc. All rights reserved.
Americas
1-800-722-2009 or 678-277-1120
www.cisco.com
Europe & Asia
+32 56 445 445
www.saeurope.com
Part Number 7018133 Rev B
October 2009
Page 9 of 9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising