IF-2D3D1
HD/SD SDI 1 (L)
and
1080
HD/SD SDI 2 (R)
Y/Cb/Cr=4:2:2
(for mixing)
720
HD/SD SDI 1 (L)
or
HD/SD SDI 2 (R)
1080
Y/Cb/Cr=4:2:2
LR INVERT
ROTATE
H_MIRROR
V_MIRROR
FRAME SYNCHRO.*3
SCOPE*2
LR mixer ADJUST
2D-3D converter
ADJUST
INPUT SELECT
LR
2D-3D
INVERT
OFF
—
ON
60p*1
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
50p
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
30p*1
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
25p
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
24p*1
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
24psF
● ● ●
● ●
● ● ● ●*4 ●*4 ● ● ● ● ● ● ● ● ●
60i*1
● ● ●
● ● ● ●
● ● ● ● ● ● ● ● ● ● ●*5 ● ● ●
50i
● ● ●
● ● ● ●
● ● ● ● ● ● ● ● ● ● ●* ● ● ●
60p*1
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
50p
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ●
—
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
50p
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
30p*1
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
25p
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
24p*1
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ●
● ●
—
When using
LR mixer
HD/SD
SDI IN 1 (L)
HD/SD
SDI IN 2 (R)
—
NORMAL
INVERT
—
● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
60p*1
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
50p
●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
60p*1
●
● ● ● ● ●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
❚ Audio signals
50p
●
● ● ● ● ●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
Audio signal input/output
30p*1
●
● ● ● ● ●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
25p
●
● ● ● ● ●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
24p*1
●
● ● ● ● ●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
60i*1
●
● ●
●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
50i
●
● ●
●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
60p*1
●
● ● ● ● ●*6 ●*6 ● ● ● ● ● ● ● ● ● ● ● ● ●
●
● ● ● ● ●* ●* ● ● ● ● ● ● ● ● ● ● ● ● ●
●
●
●
● ● ● ● ● ● ● ● ● ● ● ● ●
UXGA@60
●
●
●
● ● ● ● ● ● ● ● ● ● ● ● ●
WSXGA+@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
MIX
MIX
INPUT SELECT
OUTPUT PRESET
LR
SDI OUT HDMI OUT
2D-3D
INVERT
SELECT
SELECT
HD/SD SDI 1 (L)
MIX/
MIX/
OFF
When using HD/SD SDI 2 (R)
INDIVIDUAL INDIVIDUAL
2D-3D
—
HDMI
INDIVIDUAL INDIVIDUAL
converter
(When selecting
ON
MIX
MIX
one of the above)
6
NORMAL
INDIVIDUAL INDIVIDUAL
When using HD/SD SDI (L)
LR mixer
HD/SD SDI (R)
INVERT
—
NORMAL
SXGA@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
WXGA@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
XGA@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
SVGA@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
WVGA@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
Input/output formats of audio signals
VGA@60
●
● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
Input format of embedded audio signal
MIX
MIX
INVERT
*1 The unit is compatible with frame rates of 1.00 and 1/1.001 both when the input signal is 60 Hz, 30 Hz, or 24 Hz. (60 Hz: compatible with 59.94 Hz and 60.00 Hz,
30 Hz: compatible with 29.97 Hz and 30.00 Hz, 24 Hz: compatible with 23.97 Hz and 24.00 Hz)
*2 The scope function does not work when input signals are incompatible with the selected 3D mix format though the SCOPE button lights up.
*3 The frame synchronizer cannot synchronize frames if the 1.00-frame-rate signal and 1/1.001-frame-rate signal are input. Unify the frame rate of input signals to
1.00 or 1/1.001.
*4 L/R selectable.
*5 The bottom scanning line of the rotated image is processed into black when using the rotation function.
*6 No output when HDCP is used.
*7 VESA/CVT-RB compliant (except for WUXGA)
HD/SD SDI IN
❚ Dimensions
❚ Specifications
IEC60958 PCM 48 kHz 8ch
IEC60958 PCM 48 kHz 2-8ch HDMI IN
Dolby Digital (AC3) 5.1ch compatible
DTS 5.1ch
MPEG2-AAC stereo 2ch
Output terminal (audio)
HD/SD
HD/SD
HDMI
SDI 1 (L)
SDI 2 (R)
Throughout
HD/SD
SDI 1 (L)
HD/SD
SDI 2 (R)
HD/SD
SDI 1 (L)
HD/SD
SDI 2 (R)
HD/SD
SDI 2 (R)
HD/SD
SDI 1 (L)
HD/SD
SDI 2 (R)
HD/SD
SDI 1 (L)
HD/SD
SDI 1 (L)
HD/SD
SDI 2 (R)
HD/SD
SDI 1 (L)
HD/SD
SDI 2 (R)
Output format of embedded audio signal
HD/SD SDI OUT
HDMI OUT
HD/SD SDI OUT
HDMI OUT
HD/SD SDI OUT
HDMI OUT
IEC60958 PCM 48 kHz 8ch
IEC60958 PCM 48 kHz 2ch
IEC60958 PCM 48 kHz 2-8ch
IEC60958 PCM 48 kHz 2ch
No output available
Dolby Digital (AC3) 5.1ch compatible*
DTS 5.1ch*
MPEG2-AAC stereo 2ch*
* Throughout output
Unit: mm (inch)
General
Input/Output
Model name
Power requirements
Rated current
Power consumption
Dimensions (W × H × D)
Mass
HD/SD SDI
Input terminals
HDMI
Output terminals
Audio
HD/SD SDI
HDMI
HD/SD SDI
HDMI
External control
Others
E. & O.E. Design and specifications subject to change without notice.
All TV screen pictures are simulated. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC. All other brand or product names may be trademarks and/or registered trademarks of their respective owners. Any rights
not expressly granted herein are reserved.
Copyright
INDIVIDUAL INDIVIDUAL
INVERT
IF-2D3D1
Output terminal (video)
HD/SD
HD/SD
HDMI
SDI 1 (L)
SDI 2 (R)
HD/SD SDI IN 1 (L) throughout
HD/SD
HD/SD
HD/SD
SDI IN 1 (L)
SDI IN 1 (L)
SDI IN 1 (L)
3D-converted 3D-converted 3D-converted
left-channel right-channel left-channel
signal
signal
signal*1
HD/SD
HD/SD
HD/SD
SDI IN 1 (L)
SDI IN 1 (L)
SDI IN 1 (L)
3D-converted 3D-converted 3D-converted
mixed signal mixed signal mixed signal
HD/SD SDI IN 2 (R) throughout
HD/SD
HD/SD
HD/SD
SDI IN 2 (R)
SDI IN 2 (R) SDI IN 2 (R)
3D-converted 3D-converted 3D-converted
left-channel right-channel left-channel
signal
signal
signal*1
HD/SD
HD/SD
HD/SD
SDI IN 2 (R)
SDI IN 2 (R) SDI IN 2 (R)
3D-converted 3D-converted 3D-converted
mixed signal mixed signal mixed signal
HDMI IN throughout
HDMI IN
HDMI IN
HDMI IN
3D-converted 3D-converted 3D-converted
left-channel right-channel left-channel
signal
signal
signal*1
HDMI IN
HDMI IN
HDMI IN
3D-converted 3D-converted 3D-converted
mixed signal mixed signal mixed signal
HD/SD
HD/SD
HD/SD
SDI IN 1 (L) SDI IN 2 (R) SDI IN 1 (L)*2
HD/SD
HD/SD
HD/SD
SDI IN 2 (R) SDI IN 1 (L) SDI IN 2 (R)*2
MIX
MIX
MIX-INVERT
MIX-INVERT
*1 A 3D-converted video signal from the HD/SD SDI IN 1 (L) terminal comes out of the HDMI OUT terminal when
OUTPUT PRESET is set to INDIVIDUAL during 2D-3D conversion.
*2 A video signal from the HD/SD SDI IN 1 (L) or HD/SD SDI IN 2 (R) terminal comes out of the HDMI OUT terminal
when OUTPUT PRESET is set to INDIVIDUAL during LR mixing.
● ● ● ● ● ● ● ● ● ● ●
WUXGA
MIX
NORMAL
●
PC*
—
MIX
●
7
—
ON
60i*1
50p
MIX
INDIVIDUAL INDIVIDUAL
HDMI IN
24psF
HDMI
MIX
5
60p*1
6
—
OFF
50i
720
—
ON
(for 2D-3D
Video
MIX
INDIVIDUAL INDIVIDUAL
HD/SD
SDI IN 2 (R)
conversion)
1080
MIX
OFF
When using
2D-3D
converter
●
720
OUTPUT PRESET
SDI OUT HDMI OUT
SELECT
SELECT
—
—
INDIVIDUAL INDIVIDUAL
HD/SD
SDI IN 1 (L)
SIDE-BY-SIDE H
ABOVE-BELOW
3D MIX FORMAT
LINE-BY-LINE
CHECKERBOARD
MIX
HD/SD SDI
INDIVIDUAL
MIX
HDMI
INDIVIDUAL
PARALLAX
INTENSITY
SUB INT.
PARALLAX ANA
INTENSITY ANA
SUB INT. ANA
PARALLAX LRS
INTENSITY LRS
SUB INT. LRS
MEMORY-1
MEMORY-2
SPLIT MODE
ANAGLYPH MODE
LR-SEQ. MODE
PARA._W.F.M.
PARA._V.S.
IN1_W.F.M./IN2_W.F.M.
IN1_V.S./IN2_V.S.
BAL._W.F.M.
BAL._V.S.
INPUT
3D Image Processor
❚ Video input/output
Output
2D-3D converter
LR mixer
❚ Input/output signal formats
Operation environment
IF-2D3D1
AC 120 V - 240 V, 50 Hz/60 Hz
0.18 A
10 W (approx.)
430 mm × 48.5 mm × 248.5 mm (17” × 2” × 9 7/8”)
2.5 kg (5.5 lbs) (excluding accessories)
BNC terminals 0.8 V (p-p) x 2
1 (version 1.3 compliant)
BNC terminals 0.8 V (p-p) x 2
BNC terminals 0.8 V (p-p) x 2 (Reclock out)
1 (version 1.3 compliant)
HD/SD embedded audio 1-2G 8 channels (48 kHz)
Linear PCM 8 channels (48 kHz)
RS-232C terminal (D-sub 9 pin) x 1
Temperature: 5°C - 35°C, humidity 20% - 80% (No condensation)
(Operatable environment may vary depending on the condition
of the installation place.)
NOTE:
When creating 3D video content: Studies have shown that the viewing of overly processed
3D video content can have detrimental health effects such as causing nausea and/or eye
fatigue. Therefore, it is important to always create 3D content that is easy on the viewers’ eyes
by reducing 3D effects to a minimum.
The New Way to Create 3D Content
3D Workflow – Revolutionized.
2010, Victor Company of Japan, Limited (JVC). All Rights Reserved.
3D Image Processor offering real-time 2D-3D conversion and LR signal
mixing to greatly simplify 3D content workflow.
DISTRIBUTED BY
Printed in Japan
ICN-0395
“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
3D Image Processor
JVC’s new IF-2D3D1 3D Image Processor is capable of converting existing 2D video
sources into 3D video with real-time speed thanks to unique algorithms. In addition to
2D-3D conversion capability, the IF-2D3D1 also features an LR Mixer and 3D Camera
Adjustment modes that not only make 3D filming and editing more efficient but also
contribute to the creation of innovative 3D video content. The IF-2D3D1 provides a
variety of advantages to answer the rapidly expanding demands of 3D video content.
IF-2D3D1
JVC’s GD-463D10, a 46-inch
Professional 3D Monitor
In order to obtain the optimum intended 3D
effect, it is highly recommended to set the
binocular parallax by first estimating the
maximum size of the display for viewing.
• 2D sources
Input 2D source via HD-SDI/HDMI
• 3G-SDI Ready
3D output
The IF-2D3D1 is compatible with the latest
high-speed video interface 3G-SDI*.
LR stereo output via
HD-SDI/HDMI
* Complies with the Mapping structure 1 for SMPTE 425M.
• 3D Recording
When recording in 3D with a 2 camerahead system.
REAL-TIME LR MIXER
REAL-TIME 3D CONVERTER
The IF-2D3D1 features a 3D converter with JVC’s original algorithms that is capable of converting existing 2D film and video sources
(HD-SDI or HDMI) into 3D video in real-time. The converted images can be output to 3D-compatible displays or projectors via HD-SDI
or HDMI signals, and even separately as left/right HD-SDI signals for post-production of 3D images.
The IF-2D3D1 is equipped with a 3D image mixer that enables verification
of 3D images while recording in 3D. The real-time 3D image composition
feature enables easier and more flexible image monitoring while the scope
functions help with camera adjustment and other device settings.
Stereoscopic effect adjustments
The IF-2D3D1 rotation/mirror function works with
all 3D camera rig configurations.
Camera adjustments
In order to achieve the most suitable and effective results for each scene just as the creator envisioned,
precise adjustment of stereoscopic effects such as parallax and intensity are made possible with the IF-2D3D1.
These fine-tuned values of parallax, intensity and sub-intensity can also be stored (up to two) for future use.
The LR Mixer features a number of camera adjustments to support
3D recordings.
Photo: © Richard Clark, President/Inter Video
• Parallax
• Intensity
• Sub-intensity
• Split
• Scope
Parallax displaces the left- and right-eye
image convergences.
Intensity adjusts both the degree of
curvature and perception of depth.
Sub-intensity adjusts the relief (emboss)
intensity of an object.
With its Split function, the IF-2D3D1 divides
a screen to display the left side of the image
on the left camera and the right side of the
image on the right camera. This is useful for
fine-tuning requirements such as recording
positions in the vertical direction, LR iris
differences, and white balance adjustments.
The Split position can also be shifted.
A built-in waveform monitor and vectorscope
allow the user to easily check and monitor
input signals from the 2 channels for
approximate adjustment of cameras.
More parallax displacement
Less parallax displacement
Within a screen, image on the left of the vertical line is from
HD/SD SDI IN 1 (L), whereas on the right of the line is from
HD/SD SDI IN 2 (R).
• Rotation/mirror function
Whether the 3D camera rig setup is rotated,
H. mirrored or V. mirrored, the IF-2D3D1
inverts one of the two images vertically
and/or laterally to a normal viewing position
and adds automatic delay to non-rotated
image by one frame in order to synchronize
the two images. This allows easy viewing of
both images side-by-side on the monitor.
Before rotation
Example of mismatched
iris adjustment
User-friendly features
❚ 3D adjustment monitoring methods
❚ Four 3D mix formats to choose from
For adjusting stereoscopic effects, users can select from the three 3D
monitoring methods of normal, anaglyph-like, and sequential L/R switching.
The IF-2D3D1 is compatible with four 3D image formats, Side-by-sidehalf, Above-below, Line-by-line, and Checkerboard, and any of these
formats can be converted in real-time.*
Normal: Image adjustment is
possible while viewing images
on a 3D-compatible monitor.
Anaglyph-like: Left and right
images are colored differently.
L
R
L
R
0.5 sec
0.5 sec
0.5 sec
0.5 sec
Sequential L/R switching: Left and right images
are displayed alternately at 0.5-sec intervals,
making this method ideal for content creators as
3D glasses are not necessary for viewing.
Example of vertical shift
in the recording position
Available monitoring methods: Three
monitoring methods of Single, Parallel and
Balance are available for comparing LR
signals. The scope position (waveform or
vectorscope) can be set on any of the four
corners.
After rotation
* Selectable formats vary depending on the type of input signal and on the compatibility of
connected devices. For further details, refer to the tables on the rear cover.
LLL RRR
L
L
L
R
R
R
Side-by-side-half
Above-below
(top/bottom)
R
R
R
R
R
R
L
R
L
R
L
L
R
R
L
R
L
R
L
L
L
L
L
L
Line-by-line
L
R
L
R
L
R
L
R
L
R
L
R
L R L R L R L R L R L R L R L R L
R L R L R L R L R L R L R L R L R
L RL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL
R LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LR
RL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL R
L R L R L R L R L R L R L R L R L
LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LR L
R L R L R L R L R L R L R L R L R
RL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL R
L R L R L R L R L R L R L R L R L
LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LR L
R L R L R L R L R L R L R L R L R
RL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL R
L R L R L R L R L R L R L R L R L
LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LR L
R L R L R L R L R L R L R L R L R
RL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL R
L R L R L R L R L R L R L R L R L
LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LR L
R L R L R L R L R L R L R L R L R
RL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL R
LRRL LRRL LRRL LRRL LRRL LRRL LRRL LRRL LR L
R L R L R L R L R L R L R L R L R
L R L R L R L R L R L R L R L R L
Checkerboard
R
L
R
L
R
L
R
L
R
L
R
L
Configuration of input settings
Example of mismatched
white balance
Single: For displaying HD/SD SDI IN 1 (L) and HD/SD SDI IN
2 (R) images sequentially.
Parallel: For displaying HD/SD SDI IN 1 (L) and HD/SD SDI
IN 2 (R) images side-by- side.
Balance: For displaying the differences in signals between
HD/SD SDI IN 1 (L) and HD/SD SDI IN 2 (R).
• Frame Synchronizer: Left and right input
signals of the same format can be
synchronized.
• LR Inversion: Signal inversion for output to
opposite channels can be accomplished.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising