L-Series SPCW8, 8-Inch Dual Voltage Speaker - Gamewell-FCI

L-Series SPCW8, 8-Inch Dual Voltage Speaker - Gamewell-FCI
L-Series
SPCW8, 8-Inch
Dual Voltage Speaker
Dual Voltage Speaker for Fire and
General Signaling Systems
Description
The Gamewell-FCI, SPCW8 8” speaker provides a solution
for ceiling mount applications that are used for tap settings
that range between 1/8 watt to 8 watts. This product provides a solution for almost any voice or audio requirement.
Gamewell-FCI offers seven different tap settings ranging
from 1/8 watts to 8 watts providing a solution for life safety
and general signaling requirements. The high dB output
reduces the number of speakers required for sound and
intelligibility. The SPCW8 is designed for high efficiency
sound output with low total harmonic distortion to offer a
high-fidelity sound output.
The speaker’s clear audible sound is designed to meet life
safety needs ranging from fire to emergency communication messages. With its wide frequency range, it can also
be used for general signaling such as paging and background music. The SPCW8 speaker is listed to the following standards.
• ANSI/UL 1480
• CAN/ULC S541
• CSA C22.2. No. 205 requirements for public mode and
general signaling applications
• ANSI/UL 2043 plenum rated
The speaker is suitable for indoor and damp installations.
The SPCW8 can be surface-mounted with the included
back can or flush-mounted with the optional accessory,
SB-SPC8. The SB-SPC8 (sold separately) offers support
for ceiling tile installations. The 3/4 inch knockouts are provided for conduit entry and are compatible with plenum
rated cable and plenum whip flex conduit.
Speaker and Speaker Strobe Specifications
Architectural/Engineering Specifications
The Gamewell-FCI, SPCW8 8-inch dual voltage speaker
and enclosure shall mount using the SB-SPC8 mounting
bracket, sold separately. The SPCW8 can be flush
mounted with a supplied back can or ceiling mounted with
the back can and SB-SPC8 tile bridge.
The speaker shall be a SPCW8 dual-voltage transformer
speaker capable of operating at 25.0 or 70.7 nominal VRMS
with field-selectable tap settings from ¹/8 to 8 Watts. It
should be listed to the following standards.
• ANSI/UL 1480
• CAN/ULC S541
• CSA C22.2 No. 205 requirements for public mode and
general signaling applications
• ANSI/UL 2043 plenum rated
The Speaker is suitable for indoor and damp installations.
The speaker shall have a frequency range of 400 to 4,000
Hz and shall have an operating temperature between 32°F
and 120°F. The speaker shall have power taps and voltageS that are selected by jumper connection.
SPCW8 Speaker
Features
• Listed with UL and ULC Standards.
• Speaker ships with included back can.
• For use with the separately sold tile support bracket:
Part Number: SB-SPC8.
• Offers flush and ceiling tile mounting with the use of a
ceiling tile bracket.
• Uses voltage and speaker tap settings via a jumper connection.
• Supports the field selection of speaker voltages (25 and
70.7 VRMS) and the following power settings:
– 1/8 watts – 1/4 watts
– 1/2 watts
– 1 watt
– 2 watts – 4 watts
– 8 watts
• Provides a broad temperature range 32°F to 120°F.
• Accepts wire up to 12 AWG.
SIGNALING
FM
APPROVED
PENDING
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
9021-60927 Rev. A page 1 of 2
©2016 by Honeywell International Inc. All rights reserved
Figure 2 illustrates the ceiling-mount speaker with back can and
SP-SPC8 tile the bridge.
Figure 1 illustrates the dimensions for the SPCW8.
.204
4.224
12.795
Figure 1 SPCW8 Dimensions
Figure 2 SPCW8 Surface Mounting
UL Current Draw Data
Table 1 lists the UL Current Draw for the sound output.
Sound Output
UL Reverberant (dBA @ 10 ft.)
SPCW8
UL Anechoic (dBA @ 10ft.)
SPCW8
1/8 W
93
1/4 W
78
1/2 W
81
1W
84
2W
87
4W
90
8W
93
82
85
87
91
94
97
100
Table 1: UL Current Draw Data
Physical Specifications
Electrical/Operating Specifications
Operating Temperature:
Nominal Voltage:
(speakers)
Maximum Supervisory
Voltage (speakers)
Operating Voltage Range:
(includes fire alarm panels
with built-in sync)
Humidity Range:
32°F to 120°F
(0°C to 49°C)
10 to 93% non-condensing
Ceiling-Mount Dimensions
SPCW8 Speaker with Grill:
Diameter
12.8”, 325.1 mm
Depth
2.7”, 68.6 mm
SPCW8 Speaker with Back Can:
Diameter
12.8”, 325.1 mm
Depth
4.2”, 106.7 mm
SB-SPC8 Tile Support Bracket:
Length
23.75”, 603.3 mm
Width
4.125”, 104.8 mm
Diameter Opening
10.75”, 273.1 mm
Frequency Range:
Power Settings:
Input Terminal Wire
Gauge:
25 Volts or 70.7 Volts
(nominal) Max. Supervisory
50 VDC
8 to 17.5 V (12 V nominal) or
16 to 33 V (24 V nominal)
400 to 4,000 Hz (Fire Alarm),
200Hz - 15KHz
(General Signaling)
1/8, 1/4, 1/2, 1, 2, 4, 8 watts
12 to 18 AWG
Ordering Information
Speaker
Part Number
White
SPCW8
Accessories
White
SP-SPC8
Description
8 Inch Dual Voltage Speaker
Description
Tile Support Bracket
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
9021-60927 Rev. A page 2 of 2
www.gamewell-fci.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising