Fluke Leakage Clamp Meter Hioki AC Power Monitors

Fluke Leakage Clamp Meter Hioki AC Power Monitors
Fluke Leakage Clamp Meter
• Measure leakage current with 1 µA
resolution, for monitoring of insulation
erosion
• Measure to 60 A, for general
installation needs
• Perform tests without powering down
the installation or disconnecting
equipment
• Advanced shielding ensures accurate
results when measuring near other
conductors
• Easy-to-carry, pocket-sized clamp with
40 mm (1.5") jaw size
• Handy “Display-Hold” button for
capturing readings in hard-to-reach
places
• Auto power-off, with warning buzzer,
saves battery life
• Meets safety standard VDE0404-4 and
VDE0702 for leakage current and
differential current measurement of
electrical appliances
SPECIFICATIONS
Ranges:
Resolution:
Accuracy:
(50/60 Hz)
Frequency range:
Maximum current:
Digital display:
Bargraph display:
Measurement cycle:
Range switching:
Environment:
Temperature coefficient:
Influence of external
magnetic field:
Influence of
conductor position:
Circuit voltage:
Safety standard:
Battery type:
Battery life:
Conductor diameter
Dimensions:
L
360
ORDERING INFORMATION
Fluke-360
NEW
3 ma, 30 mA, 30 A, 60 A
0.001 mA, 0.01 mA, 0.01 A, 0.1 A
± 1% rdg ± 5d (≤50 A)
± 5% rdg ± 5d (>50 A)
15-150 Hz
60 A rms
3200 count LCD
32 segment LCD
2/sec. (digital display), 12 /sec. (bargraph display)
Auto-range
0-50 °C, <80 % RH (non-condensing)
<0.05 % of range/°C (0-18 °C & 28-50 °C, <50 A)
0.0005 % typical (on current value of adjacent cable)
Within accuracy
≤ 300 Vrms
EN 61010-1, EN 61010-2-032. 300 V CAT II, Pollution Degree 2
3 V Lithium battery (CR2032)
Approx. 90 hours (continuous use)
40 mm (1.57") max.
176 x 70 x 25 mm (6.9" x 2.8" x 1")
Leakage Current Clamp Meter
Hioki AC Power Monitors
Clamp-On Power HiTester
TEST
EQUIPMENT
• Measure up to two 3Ø,
3-wire systems
• Measure up to four 1Ø,
2-wire systems
• 5A to 5000A range
• Simultaneous recording
of demand values
and harmonics
• Ideal for troubleshooting &
energy management
3169 SPECIFICATIONS
Systems:
Functions:
Ranges:
3169
L
Power:
1Ø 2-wire, 1Ø 3-wire, 3Ø 3-wire, 3Ø
4-wire (50/60 Hz)
ACV, ACA, W, VA, VAr, PF, integrated
power, Frequency, Harmonics
150/300/600V
With 9660: 5-100A, 4 ranges
With 9661: 5-500A, 5 ranges
With 9669: 100A-1kA, 3 ranges
With 9667: 500A-5kA, 2 ranges
With 9694: 0.5A-5A, 3 ranges
75W to 9MW, 108 combination
patterns
Power Quality Analyzer
• Measure Dips, Swells, Interruptions,
Flicker, Transients
• Harmonic to the 50th order
• High frequency transient over voltage
• Detection and waveform display
• 4 current and 4 voltage channels
ORDERING INFORMATION
Order Clamp-on Sensor Separately
HK/3169-20
Clamp-On Power HiTester, with voltage leads
HK/3196
Power Quality Analyzer, with voltage leads
HK/9660
100A Clamp-On Sensor
HK/9661
500A Clamp-On Sensor
HK/9669
1000A Clamp-On Sensor
HK/9667
5000A Flexible Clamp-On Sensor
HK/9694
5A Clamp-On Sensor
Other Options:
Printer, memory cards, PC software, carrying case
147
Accuracy:
±0.2% rdg ±0.1% f.s. + Clamp
accuracy (for active power)
With 9660: ±0.3% rdg ±0.02% FS
With 9661: ±0.3% rdg ±0.01% FS
With 9669: ±1.0% rdg ±0.01% FS
With 9667: ±2.0% rdg ±1.5 mV
With 9694: ±0.3% rdg ±0.02% FS
Harmonics: Up to the 50th order, ±3% FS +
measurement accuracy
Power:
100 to 240VAC, 50/60 Hz
Dimensions: 8.3"W x 6.3H x 2.4"D
3196 SPECIFICATIONS
Systems:
Ranges:
3196
L
1Ø 2-wire, 1Ø 3-wire, 3Ø 3-wire, 3Ø 4-wire (50/60 Hz)
Ch1, Ch2, Ch3: 150/300/600V AC
Ch4: 60/150/300/600V AC, 60/600V DC
9660: 50/100A, 9661: 50/500A, 9667: 500/5000A,
9669: 1000A
Measurements:
1. Transient overvoltage
2. Voltage swell, Voltage dip, Voltage interruption
3. Frequency, Voltage, Current, Voltage/Current peak,
Active/Reactive /Apparent power, Power factor, DPF
4. Voltage unbalance ratio, Current unbalance ratio
5. Harmonic voltage/current/power, Inter harmonic
voltage/current, Harmonic voltage current phase angle,
Total harmonic/inter harmonic distortion
6. IEC flicker[Pst, Plt], K factor / ∆V10(Japan)
Internal Memory:
13MB
Interface:
Flash ATA card (up to 528MB), RS-232C, LAN
(10BASE-T), HTTP server function
Power:
Rechargeable battery & AC adapter
Dimensions:
11.8"W x 8.5"H x 2.7"D
Yokogawa Clamp-on Power Monitors/Analyzers
CW121 Clamp-on Power Monitor
For maintenance and long term monitoring of electrical
equipment and systems.
• Supports 1Ø 2W to 3Ø 4W systems
• Internal flash card memory
• RS-232 or RS-485 communications
• Sends data to internal memory, PC, optional floppy disk or printer
• Compact and light weight unit
SPECIFICATIONS
Voltage:
Current:
Measurement Parameters:
Accuracy:
Record Time:
Flash Memory:
External I/O:
Data Accumulation:
Wiring Error Check:
Communications:
Display:
Safety:
Dimensions:
Power:
150, 300, 450 ACV
20 - 3000 ACA
V, A, VAR, PF, Hz, Wh
±0.8% rdg ± 0.4% rng, depending on
clamp probe
Settable from 1-30 sec., 1-30 min., 1 hr.
Compatible up to 128 MB flash card
One of three options for start / stop Wh
24 hours of data in one second intervals
Function ensures correct
measurement operations
RS-232 standard, RS-485 available
Large backlit LCD
UL approved
4.6"W x 6.4"H x 2.0"D (117x161x51mm)
100 - 240V AC, 50/60Hz (CAT II)
CW240 Clamp-on Power Analyzer
Records electric energy measurements, instantaneous measurements,
demand measurements, waveform measurements, voltage fluctuation
measurements, harmonics measurements and leakage current.
• Supports 1Ø 2W to 3Ø 4W 4i (neutral line current) systems
• Supports two system measurements (1Ø 2W X2) (1Ø 3W X2) (3Ø 3W X2)
• Data logging interval up to 1 hour
• Internal flash card memory system
• RS-232 or RS-485 communications
• Sends data to internal memory, PC, optional floppy disk or printer
SPECIFICATIONS
Voltage:
Current:
Measurement Parameters:
Record Time:
Flash Memory:
Harmonic Measurement:
Wiring Error Check:
Communications:
Display:
Safety:
Operating temperature:
Dimensions:
Power:
Location:
150, 300, 600, 1000 ACV
200.0 ACmA - 3000 ACA
V, A, VAR, PF, HZ, WATTS, VA, PA
1 cycle- 0.5 sec., 1-30 sec., 1-60 min .
Compatible up to 512 MB flash card
up to 50th
Function ensures correct measurement
operations
RS-232 standard, RS-485 available
Large backlit LCD
UL approved
5-40°C, 5-80% RH (no condensation)
8.11"W x 7.25"H x 2.56"D
(206 x 184 x 65mm)
100 - 240V AC, 50/60Hz (CAT II)
Indoor use
ORDERING INFORMATION
ORDERING INFORMATION
Clamp-on Power Monitor with complete
accessory package
Includes all required hardware and software, except clamp-on current probes:
Portable Clamp-on Power Meter, UL/CSA standard power cord, four voltage
probes, RS-232 communications, 9 pin RS232 communication cable, 16 MB
flash memory card and card holder, flash card reader and cable, power cable.
(Supplies power from measured circuit), magnetic case for power meter,
carrying case for power meter and accessories, data analysis software package.
Add suffix to part number for correct size Current Clamp-on Probes:
/C2
Clamp-on Probes for 20/200A (3pcs / set)
/C4
Clamp-on Probes for 500A (3pcs / set)
/C6
Clamp-on Probes for 700A (3pcs / set)
/C8
Clamp-on Probes for 50A (3pcs / set)
/96034
Clamp-on Probe for 3000A Jaw type
/96035
Clamp-on Probe for 3000A Flexible type
148
TEST
EQUIPMENT
YE/CW121-D-1/SP1
YE/CW240-D/DA/PMI/SPI Clamp-on Power Analyzer with complete accessory
package. Includes all required hardware and software, except clamp-on current
probes (see below): UL/CSA standard power cord, four voltage probes, NiMH
battery pack & six AA alkaline batteries, carrying case, 16 MB flash card and
card reader, 9 pin RS-232 cable and Toolbox software package, users manual,
quick manual, communications manual.
Add suffix to part number for correct size Current Clamp-on Probes:
/C2
Clamp-on Probes for 20/200A (4 pcs / set)
/C4
Clamp-on Probes for 500A (4 pcs / set)
/C6
Clamp-on Probes for 700A (4 pcs / set)
/C8
Clamp-on Probes for 50A (4 pcs / set)
/C10
Clamp-on Probes for 2A (4 pcs / set)
/C12
Clamp-on Probes for 3000A Jaw type
(4 pcs / set)
/C14
Clamp-on Probes for 3000A Flexible type
(4 pcs / set)
/96036 Clamp-on Probe for 2A measurement
Optional
AP240E Data analysis software package
Hioki Power Quality Analyzer
Catch power quality problems on the fly.
Includes: voltage cord set, 6 hour battery pack (rechargeable), AC adapter, USB cable,
basic PC software, carrying case & strap. Order current sensors separately.
SPECIFICATIONS
• Monitor Inrush Current, Voltage
Swells, Voltage Dips, Transient
Over-Voltage, Interruptions
• Measure and Record: Power
and Power Factor,
Active/Reactive Energy,
Demand, Load Changes (with
graph display), Voltage and
Current
• Large 4.7" Color LCD
with Backlight
Measurement lines:
L
3197
& three
9661
sensors
ORDERING INFORMATION
HK/3197
HK/9660
HK/9661
HK/9667
HK/9669
HK/9694
HK/9624-50
Power Quality Analyzer
100A Clamp-on Sensor (300V, Ø15mm jaw)
500A Clamp-on Sensor (300V, Ø46mm jaw)
5000A Flexible Clamp-on Sensor (1000V, Ø254mm jaw)
1000A Clamp-on Sensor (600V, Ø55mm jaw)
5A Clamp-on Sensor (300V, Ø15mm jaw)
Deluxe PQA Analysis Software
Single-phase 2-wire (1P2W), single-phase 3-wire
(1P3W), three-phase 3-wire (3P3W2M & 3P3W3M),
three-phase four-wire (3P4W and 3P4W2.5E)
Measurement line frequency: Auto-detect (50Hz/60Hz)
Voltage range:
600.0V AC (crest factor 2 or less)
Current ranges:
500.0mA, 5.000A, 50.00A, 10.00A, 100.0A,
500.0A, 1.000kA, 5.000 kA (manually switchable
in 2 range sets according to clamp sensor
Measurement items:
Impulsive voltage quality:
Transient overvoltage (Impulse)
RMS voltage quality:
Voltage swell, Voltage dips, Voltage interruption
Power quality:
Frequency, Voltage, Current, Current peak,
Active/Reactive/Apparent power, Power factor
(displaced power factor)
Three phase quality:
Voltage unbalance ratio, Current unbalance ratio
Harmonic quality:
Harmonic voltage, Harmonic current,
(to 50th harmonic)
Harmonic power, Harmonic voltage/current phase
angle, Total harmonic voltage distortion, Total har
monic current distortion (THD-F, THD-R),
Measurement method:
Simultaneous digital sampling of voltage and current
(sampling frequency 10.24 kHz per channel)
Interval settings:
Auto / 1 / 5 / 10 / 15 / 30 / 60 minutes
Recordable period:
125 days maximum; partition memory into four
segments for maximum 31 days of recording each
Internal memory:
4 MB non-volatile
PC Interface:
USB 2.0
Dimensions:
5.1"W x 9.7"H x 2.5"D (128 x 246x 63 mm)
Hioki AC/DC Current Monitor
Includes: carry strap, 4 AA batteries. Order clamp-on sensor separately.
L
SPECIFICATIONS
TEST
EQUIPMENT
3290
Choice of measurement mode:
DC (for battery measurement)
AC+DC RMS (for full-/half-wave rectification measurement)
AC RMS (for current distortion measurement)
PEAK (for peak value measurement of inrush current, etc.)
• Selectable recorder output and response time
• Current integral, operating time/duty measurements (3290-10)
ORDERING INFORMATION
HK/3290
HK/3290-10
HK/9691
HK/9692
HK/9693
HK/9445-02
HK/9400
149
Clamp-On AC/DC HiTester
Deluxe Clamp-On AC/DC HiTester
100A AC/DC Clamp-on Sensor (600V, Ø35 mm jaw)
200A AC/DC Clamp-on Sensor (600V, Ø33 mm jaw)
2000A AC/DC Clamp-on Sensor (600V, Ø55 mm jaw)
AC Adapter
Carrying Case
Current measurement: AC RMS, AC MEAN, AC+DC, DC
Current ranges:
20 to 100A with 9661 clamp
20 to 200A with 9662 clamp
200 to 2000A with 9663 clamp
Frequency:
10 to 1000 Hz
Analog outputs:
DC or AC Current: 2V f.s.
Level output with REC mode
Waveform output with MON mode
Integ./Frequency: 1V/f.s.
Accuracy:
Current: ± 1.3 % rdg. ± 3 digits. (typical)
Frequency: ± 0.3 % rdg. ± 1 dgt. (typical at 50/60Hz)
Frequency response: ± 2.3 % rdg. ± 8 dgt. (DC to 1 kHz)
Digital display:
4 digit, maximum 3000 counts
(9999 counts on 3290-10)
Bar display:
20 segments
Sampling rate:
Fast: 4 times / sec (3290-10: 10times/sec),
Normal: 2 times / sec,
Slow: 1 time / 3sec
Crest factor:
2.5 or less
Max. circuit voltage:
600 V AC rms. (insulated wire)
Dimensions:
6.1"W x 3.6"H x 1.9"D (155 x 98 x 47 mm)
3290-10: Polarity specific integral function measures battery charging and
discharging. Peak current display shows peak charge and discharge.
AEMC Three-Phase Power Quality Analyzers
L
PowerPad™
3945B
SPECIFICATIONS
Electrical
Sampling Frequency
Data Storage
256 samples/cycle
3945B: 4MB
8335: 2GB SD card
3945B: 960V Ø-Ø, 480V Ø-N
8335: 10-1000V Ø-Ø & Ø-N
MN Clamp: 5mA to 100mA/120A or 2 to 240A
MR Clamp: 10 to 1000Aac, 10 to 1400Adc
SR Clamp: 3 to 1200A
AmpFlex™: 10 to 6500A (Crest factor at 6500 = 1)
40 to 69Hz
kW, kVAR, kWh, kVARh, kVAh, K-Factor, Flicker
3945B: PF, DPF
8335: INrush
1st to 50th, Direction, Sequence
9.6V NiMH rechargeable battery pack
AC Supply: 110/230VAC ±20% (50/60Hz)
≥8 hrs with display on;
≥35 hours with display off (record mode)
Voltage (TRMS)
Current (TRMS)
Frequency
Other Measurements
Harmonics
Power Source
Battery Life
Mechanical
Communication
Display
Dimensions
Weight
Safety Rating
All models include three color-coded current probes with 10 ft
leads (MN93 example shown), four* color-coded 10 ft voltage
leads, four* color-coded alligator clips, RS-232 DB9F optically
coupled serial cable, NiMH battery, US 120V power cord,
DataView ® software, carrying bag, soft carrying pouch and
user manual.
*Five in 8335 Kits
ORDERING INFORMATION
AE/2130.75
AE/2130.76
AE/2130.77
AE/2130.78
AE/2130.79
AE/2130.80
AE/2136.21
AE/2136.22
AE/2136.23
AE/2136.24
AE/2136.25
AE/2136.26
™
PowerPad Model 3945B w/MN93 (240A)
PowerPad ™ Model 3945B w/SR193 (1200A)
PowerPad ™ Model 3945B w/24" AmpFlex™ 193-24 (6500A)
PowerPad ™ Model 3945B w/36" AmpFlex™ 193-36 (6500A)
PowerPad ™ Model 3945B w/MR193 (1000AAC/1400ADC)
PowerPad ™ Model 3945B w/MN193 (6A/120AAC)
PowerPad® Model 8335 w/MN93 (240A)
PowerPad® Model 8335 w/SR193 (1200A)
PowerPad® Model 8335 w/24" AmpFlex® 193-24 (6500A)
PowerPad® Model 8335 w/36" AmpFlex® 193-36 (6500A)
PowerPad® Model 8335 w/MR193 (1000AAC/1400ADC)
PowerPad® Model 8335 w/MN193 (5A/120AAC)
Accessories (Optional)
AE/2140.14 Set of three color-coded MN193 probes (6A/120A) with 10 ft leads
AE/2140.17
5A Adapter box
AE/2140.61 Set of four color-coded 30 ft voltage leads
AE/2140.24 Set of three color-coded MN93-30 probes (240A) with 30 ft leads
AE/2140.25 Set of three color-coded SR193-30 probes (1200A) with 30 ft leads
AE/2140.26 Set of three color-coded 24" AmpFlex™ 193-24-30 probes (6500A)
with 30 ft leads
AE/2140.27 Set of three color-coded 36" AmpFlex™ 193-36-30 probes (6500A)
with 30 ft leads
AE/2140.28 One AC/DC Current Probe Model MR193-BK (black connector)
(1000AAC/1400ADC)
AE/2140.29 Set of three color-coded MN193-30 probes (6A/120A) with
30 ft leads
AE/2140.30 Set of three color-coded MR193-30 probes (1000AAC/1400ADC)
with 30 ft leads
150
TEST
EQUIPMENT
Port Optically coupled RS-232
1/4 VGA (320 x 240) color LCD
9.5 x 7 x 2" (240 x 180 x 55mm)
4.6 lbs (2.1 kg)
3945B: 600V CAT III
8335: 1000V, CAT IV
•True RMS single-, two- and three-phase measurements at
256 samples/cycle, plus DC
•Real-time color waveforms
•Easy-to-use on-screen setup
•Automatic current probe recognition and scaling
•True RMS voltage and current measurement
•Measures DC volts, amps and power
•Display and capture voltage, current and power harmonics to
50th order, including direction, in real time
•Capture transients down to 1/256th of a cycle
•Phasor diagram display
•VA, VAR and W per phase and total
•kVAh, VARh and kWh per phase and total
•Neutral current display for three-phase
•Transformer K-factor display
•Power Factor, displacement PF display
•Captures up to 50 transients
•Short-term flicker display
•Phase unbalance (current and voltage)
•Harmonic Distortion (total and individual) from 1st to 50th
•Alarms, surges and sags
•Screen snapshot function captures waveforms or other information
on the display
®
•Includes DataView software for data storage, real-time display,
analysis and report generation
AEMC Single-Phase Power Quality Analyzer
• Stores up to eight screen captures
• Stores up to 1MB of trend recorded data
• Configurable from DataView® software or
front panel
• Captures up to 4096 alarm events using
up to 10 different thresholds
• Displays and records up to 17 different
power quality parameters
• Includes DataView® software for data
storage, real-time waveform display, analysis
and report generation
• Displays Min, Max and Average Volts and
Amps, Crest Factor, Peak value and K-Factor
• Calculates and displays Watts, VARs and VA,
Power Factor and Displacement Power Factor
for single-phase and balanced three-phase
• Displays total harmonic distortion (THD-F and
THD-R) for voltage and current
• Displays individual harmonic values and % for
Volts and Amps through the 50th harmonic
• Captures, displays and stores inrush current
waveforms and statistics
8230 PowerPad®Jr.
All models include current probe with 10 ft
lead and black connector, black & red 10
ft voltage leads and alligator clips, optical
USB cable, NiMH battery, US 120V power
cord, DataView® software, carrying bag,
soft carrying pouch and user manual.
M
Dat aV iew® Sof tware included with Model 8230
• Display and analyze real-time or recorded data on the PC
• Configure all PowerPad® Jr. functions & parameters
• Customize views, templates and reports
• Create and store a complete library of configurations
• Zoom in and out and pan through sections of the graph
• Display waveforms, trend graphs, harmonic spectrums,
text summaries, transients, event logs & stored alarms
ORDERING INFORMATION
AE/2130.82
AE/2130.83
AE/2130.84
AE/2130.85
AE/2130.86
AE/2130.87
PowerPad® Jr. Model 8230 w/MN93-BK (240A)
PowerPad® Jr. Model 8230 w/SR193-BK (1200A)
PowerPad® Jr. Model 8230 w/24" AmpFlex® 193-24-BK (6500A)
PowerPad® Jr. Model 8230 w/36" AmpFlex® 193-36-BK (6500A)
PowerPad® Jr. Model 8230 w/MR193-BK (1000AAC/1400ADC)
PowerPad® Jr. Model 8230 w/MN193-BK (6A/120AAC)
SPECIFICATIONS
Electrical
Voltage (TRMS)
Current (TRMS)
Frequency
Other Measurements
Harmonics
Sampling Frequency
Data Storage
Power Source
Battery Life
Mechanical
Communication Port
Display
Dimensions
Safety Rating
660V Phase-to-Phase, 600V Phase-to-Neutral
MN Clamp: 5mA to 120A or 2 to 240A
MR Clamp: 10 to 1000AAC, 10 to 1400ADC
SR Clamp: 3 to 1200A
AmpFlex®: 10 to 6500A (Crest factor at 6500 = 1)
40 to 70Hz
kW, kVAR, PF, DPF, kWh, kVARh, kVAh, K-Factor,
Flicker, Harmonic Phase Shift, Phase Rotation
THD-R, THD-F, V, A, VA
1st to 50th, Direction, Sequence
256 samples/cycle
1.5MB partitioned for waveforms, alarms & trend
NiMH AA rechargeable battery pack
AC Supply: 120/230VAC (50/60Hz)
>Eight hrs with display on,
>40 hrs with display off (recording mode)
Optically isolated USB
1/4 VGA (320 x 240) color LCD
8.3 x 4.3 x 2.4" (211 x 108 x 60mm)
EN 61010, 600V Cat. III, Pollution Degree 2
AEMC Power Quality Meter
TEST
EQUIPMENT
• Displays Min, Max and Average Volts and
Amps, Crest Factor, Peak value and K-Factor
• Calculates and displays Watts, VARs and VA,
Power Factor and Displacement Power Factor
for single-phase and balanced three-phase
• Displays total harmonic distortion (THD-F and
THD-R) for voltage and current
• Displays individual harmonic values and % for
Volts and Amps through the 50th harmonic
• Captures and displays inrush current
• Calculates & displays phase rotation & RPM
All models include current probe with 10 ft
lead & black connector, black & red 10 ft
voltage leads and alligator clips, optical
USB cable, six 1.5V batteries, two safety
8220 test probes, DataView® software, carrying
bag, soft carrying pouch and user manual.
M
Three-line backlit digital display with custom icons
ORDERING INFORMATION
AE/2130.91
AE/2130.92
AE/2130.93
AE/2130.94
AE/2130.95
AE/2130.96
151
Power Quality Meter Model 8220 w/MN93-BK (240A)
Power Quality Meter Model 8220 w/SR193-BK (1200A)
Power Quality Meter Model 8220 w/24" AmpFlex® 193-24-BK (6500A)
Power Quality Meter Model 8220 w/36" AmpFlex® 193-36-BK (6500A)
Power Quality Meter Model 8220 w/MR193-BK (1000AAC/1400ADC)
Power Quality Meter Model 8220 w/MN193-BK (6A/120AAC)
• Displays °F or °C & resistance to 2000Ω
• Conducts continuity and diode tests
• Stores up to nine complete sets of readings
for all volt, amp, power, harmonics and other
measurements
• Configurable from DataView® software or
front panel
• Operates off batteries or optional AC adapter
• Includes DataView® software for data
storage, real-time waveform display, analysis
and report generation
SPECIFICATIONS
Voltage (TRMS)
Current (TRMS)
Frequency
Other Measurements
Sampling Frequency
Data Storage
Power Source
Communication Port
Dimensions
660V Phase-to-Phase, 600V Phase-to-Neutral
MN Clamp: 5mA to 120A or 2 to 240A
MR Clamp: 10 to 1000AAC, 10 to 1400ADC
SR Clamp: 3 to 1200A
AmpFlex®: 10 to 6500A (Crest factor at 6500 = 1)
40 to 70Hz
kW, kVAR, PF, DPF, VA, Harmonics, Phase Rotation,
Temperature, RPM, Resistance, Continuity, Diode Test
256 samples/cycle
Stores nine sets of readings
Six 1.5V AA Alkaline batteries (>8hr life with display on)
AC Supply: 120/230VAC (50/60Hz) – optional
Optically isolated USB
8.3 x 4.3 x 2.4" (211 x 108 x 60mm)
Fluke Three Phase Power Quality Analyzers
The Fluke 435 and 434 three-phase power
quality analyzers help locate, predict, prevent and troubleshoot problems in threephase and single-phase power distribution
systems. The new IEC standards for flicker,
harmonics and power quality are built in.
• Analyzer trends using cursor & zoom tools
even while background recording
• Seven hours operating time per charge on
NiMH battery pack
•Transfer data files to your PC for reporting
and analysis using FlukeView® software
435 Includes: Hard carrying case with
rollers, four flexible current probes (i430flex), five test leads and clips, battery charger, FlukeView software, Power Log software,
optical USB cable, color localization set,
Getting Started manual, Users manual.
434 Includes: Hard carrying case, four current probes (i400s), five test leads and clips,
battery charger, FlukeView software, optical
USB cable, color localization set, Getting
Started manual, Users manual.
Feature
ORDERING INFORMATION
3Ø Power Quality Analyzer
3Ø Power Quality Analyzer
434
SPECIFICATIONS
System Configuration
• Automatic transient capture:
never miss an event
• Auto Trends: don't waste time
setting up recordings
3 Year warranty
Fluke 435
Fluke 434
435
Measure voltage, current, dips, swells,
interruptions, harmonics, inter-harmonics,
flicker, power, energy, transients, frequency,
unbalance, inrush, EN50160 overview
Logger function with multiple parameters
Optional*
Mains signalling
Optional*
Current probes
3000A flexible (4)
40/400A clamp (4)
Memory
16MB
8MB
Software
Power Log & FlukeView
FlukeView
IEC61000-4-30 Class A compliance
Safety rating
CAT IV 600 V/CAT III 1000 V
Battery life
Up to 7 hours/charge
*Optional function can be added with upgrade kit.
• Four voltage and four current
channels capture waveform data
on all phases simultaneously
• Meter display of phase readings
Voltage Inputs
Maximum
Bandwidth
Accuracy (ac+dc)
Current Inputs
Range
Nominal Frequency
Accuracy (ac+dc)
Watts (VA, VAR)
Accuracy
Sampling
Logger Function
Display
Power
1Ø+neutral, 1Ø split phase, 1Ø IT no neutral, 3Ø WYE, 3Ø Δ,
3Ø IT, 3Ø hi leg, 3Ø open leg, 3Ø 2-element, 3Ø 2½-element
Four (3 phases + neutral), dc coupled
1000V rms, 6kV maximum peak measured
>10kHz, up to 100kHz for transient display
435: ±0.1% of nominal voltage, 434: ±0.5% of nominal
Four ((3 phases + neutral), dc coupled
Determined by clamp-on probes used
40-70Hz, BW >10kHz
435: ±0.5%±20d, 434: ±1%±5d (with supplied probes)
1.0-20.00MW (resolution 0.1 to 1 kW)
435: ±1%±10d, 434: ±1.5%±10d
16 bit resolution. 200k samples/second max
Captures up to 10000 events, 100 parameters/phase
4.5" x 3.4" Color LCD, 320x240 pixel
115/230V ac or battery, built-in battery charger
Fluke Power Quality Analyzer
• Voltage, current and power
harmonics up to 51st
• Total harmonic distortion (THD)
• Phase angle of individual
harmonics
• Watts, power factor, displacement power factor, VA and VAR
• Voltage and current waveforms
• Calculates 3Ø Power on
Balanced Load from 1Ø
Measurement
• Use cursors to read time and
date of sags and swells.
• Catch voltage transients and
waveform distortion
• See current at the instant of
voltage events
• Catch and save up to
40 transients
• Correlate the cause of distortion
with time and date stamps
• 3 Year Warranty
The Fluke 43B includes a hard case, voltage and current
probes, FlukeView® PC software and cable, line voltage
adapter/battery charger, applications manual, power quality video and user’s manuals.
ORDERING INFORMATION
Fluke 43B
151a
Power Quality Analyzer
The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems,
troubleshoot power problems and diagnose equipment failures. All in a rugged handheld package.
Function
Measurement
Accuracy/Selection
Volts
Amps
Mains Frequency
Watts, VAR, VA
PF, DPF
Sags & Swells
Transient Capture
5.000V-600V RMS (AC & DC)
50.00A-50.00kA RMS (AC & DC)
40.0-70.0Hz
250W-2.5MW
0.25-1.00
Voltage and Current
40 ns pulse width
Up to 40 transients
1A to 1000A
500.0Ω to 30.00MΩ
50.00nF to 500.0μF
Dc, ac, ac+dc, peak,
peak-peak, Hz, duty cycle,
phase, pulse width, crest
factor
All functions
V/A/Hz, Power, Harmonics,
Ω/Cap, Temperature, Scope
±(1%+10d)
±(0.5%+2d)
±(4%+4d)
±0.04
4 min-16 days selectable
Select 20/50/100/200% above
or below line voltage
1s to 5 min selectable
±(0.6%+5d)
±(2%+10d)
Sampling rate: 25MS/sec
Bandwidth:
Voltage BW (Channel 1): 20MHz
Current BW (Channel 2): 15kHz
10 screens
4 min-16 days selectable
parameters in each display mode
Thrush Current
Ohms
Capacitance
Scope
Screen Saves
Recording
Battery life: Rechargeable Ni-Cd pack (charger included), 6 hrs typical (continuous)
OPTIONAL ACCESSORIES
i200s
80i-1000s
i2000flex
80TK
80T-IR
PAC91
240A AC current probe
1000A AC current probe
2000A flexible AC current probe
Thermocouple module
Non-contact infrared temperature probe
Parallel printer adapter
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising