ImageNow Server and Client Update Guide

ImageNow Server and Client Update Guide
ImageNow Server and Client
Update Guide
ImageNow Version: 6 .7. x
Written by: Product Documentation, R&D
Date: September 2016
© 2014 – 2015 Lexmark International Technology, S.A. All rights reserved.
Lexmark is a trademark of Lexmark International Technology, S.A., or its subsidiaries, registered in the U.S. and/or
other countries. All other trademarks are the property of their respective owners. No part of this publication may be
reproduced, stored, or transmitted in any form without the prior written permission of Lexmark.
Ta ble of C ontents
ImageNow Server 6.7.x Update readme ........................................................................................... 5
Prepare for the update .............................................................................................................................. 5
Special considerations .............................................................................................................................. 5
Updating ImageNow Server .............................................................................................................. 7
Updating ImageNow Server on Windows ................................................................................................. 7
Verify your ImageNow version ............................................................................................................... 7
Reset workflow items ............................................................................................................................ 8
Stop ImageNow services ....................................................................................................................... 8
Back-up your settings ........................................................................................................................... 8
Download updated files ......................................................................................................................... 8
Update the SQL or Oracle database from 6.x to 6.7 ............................................................................ 9
Update the SQL or Oracle database in 6.7 ......................................................................................... 10
Update ImageNow Server ................................................................................................................... 12
Verify your ImageNow database ......................................................................................................... 12
Updating ImageNow Server on UNIX...................................................................................................... 12
Reset workflow items .......................................................................................................................... 13
Stop ImageNow services ..................................................................................................................... 13
Back-up your settings ......................................................................................................................... 13
Update ImageNow Server ................................................................................................................... 13
Update the ImageNow Database ........................................................................................................ 14
Install AIX and Linux library files .......................................................................................................... 15
Restart the ImageNow Services .......................................................................................................... 15
Verify your ImageNow database ......................................................................................................... 16
Updating ImageNow Client ..................................................................................................................... 16
Obtain updated license files .................................................................................................................... 16
Install Updated ImageNow product licenses .......................................................................................... 17
Updating Agents ...................................................................................................................................... 18
Updating WebNow .................................................................................................................................. 18
Updating ImageNow Forms Server ......................................................................................................... 19
Updating Business Insight ...................................................................................................................... 19
Updating Fax Agent ................................................................................................................................ 21
Updating Output Agent ........................................................................................................................... 21
Updating Retention Agent ....................................................................................................................... 22
ImageNow Server and Client Update Guide 6.7.x
Page 3 of 55
Addendum A: Database Changes by Release ................................................................................. 23
Addendum B: INI Changes by Release ........................................................................................... 39
INI changes from 6.1.0 to 6.1.1 ............................................................................................................... 39
INI changes from 6.1.1 to 6.1.2 ............................................................................................................... 39
INI changes from 6.1.2 to 6.1.3 ............................................................................................................... 40
INI changes from 6.1.3 to 6.1.4 ............................................................................................................... 40
INI changes from 6.1.4 to 6.1.5 ............................................................................................................... 41
INI changes from 6.2 to 6.3 ..................................................................................................................... 42
INI changes from 6.3 to 6.4 ..................................................................................................................... 44
INI changes from 6.4.x to 6.5 .................................................................................................................. 45
INI changes from 6.5.x to 6.6.x ............................................................................................................... 46
INI changes from 6.6.x to 6.7.x ............................................................................................................... 49
ImageNow Server and Client Update Guide 6.7.x
Page 4 of 55
Ima geNow Ser ver 6.7.x Upda te readme
This readme file provides important information about updating ImageNow products from a previous
version of 6.x to 6.7.x. Read this file before you update ImageNow Server, clients, agents, database, and
extensions.
Additional upgrade guides for specific products and solutions, such as the Accounts Payable Invoice
eForm, can be found in the Customer Portal. To find a specific upgrade guide, go to
www.perceptivesoftware.com, log in to the Customer Portal, select the Product Documentation link, and
navigate to the product or solution page.
Note This document does not provide information on performing a more significant upgrade from a
version prior to 6.x. If you are attempting to upgrade from a version previous to 6.x, Perceptive Software
recommends you arrange a managed upgrade. For more information visit the Upgrade Center at
https://www.perceptivesoftware.com/upgrade, or email upgrade@perceptivesoftware.com.
Prepare for the update
Complete backups of all ImageNow Server data before beginning any update installation. Neither
Perceptive Software nor any of its authorized resellers are responsible for lost data caused by the
update procedure described in this document.
Before updating your ImageNow system, verify that your system matches the requirements listed in the
Technical Specifications. To view this document, go to www.perceptivesoftware.com, log in to the
Customer Portal, select the Product Documentation link, and select 6.7.x as your product version. In the
navigation pane, select Administrator Topics>Technical Specifications, and then open the ImageNow
Technical Specifications file.
Special considerations
Before you perform an update of your ImageNow system, ensure that you keep in mind the
considerations specific to your system configuration.
Active-Active
•
In an active-active environment, there should only be one node instance per machine, spread across
several machines. While the separate hardware devices have some shared file systems states, they
are provided via third-party clustered file system products.
•
If you are switching to an active-active server configuration during your 6.7 update, note that
switching involves various considerations. For more information about active-active configuration,
refer to the Active-Active ImageNow Server Getting Started Guide, which is available in the Product
Documentation tab in the Customer Portal on our website.
64-bit
•
If you are switching to a 64-bit ImageNow Server machine during your 6.7 update, note that the
switch to a 64-bit machine involves changing your operating system. For information about
migrating ImageNow to this environment, refer to the Moving ImageNow Server on Windows to 64bit Best Practices guide, which is available in the Product Documentation tab in the Customer
Portal on our website.
•
Before you install WebNow or Forms Server, you must have your web application server, such as
Apache Tomcat, installed. The version of the web application server (32- or 64-bit) must be
compatible with the WebNow or Forms Server version (32- or 64-bit).
ImageNow Server and Client Update Guide 6.7.x
Page 5 of 55
•
If your ImageNow Server machine runs on a 64-bit environment, you must configure external 32-bit
agents remotely from 32-bit machines.
•
Verify the compatibility of all of your applications and business applications with a 64-bit operating
system before you install ImageNow.
Database
Prior to ImageNow 6.7, the INOW6 database tables resided in the DBO schema. In ImageNow 6.7, the
INOW6 database tables reside in the INUSER schema. During an upgrade to 6.7, all tables are
transferred from the DBO schema to the INUSER schema. Any permissions that have been granted to
the ImageNow tables will be lost during the transfer.
Note This change also affects external systems that access the ImageNow database. If your users have
hard-coded access to the ImageNow database tables using the OWNER.TABLE_NAME structure, you
must change it when performing the update to 6.7.
•
For Microsoft SQL databases, you must execute a command to grant permissions to the entire
schema or multiple commands to grant permissions at the object level.
To grant permissions to the entire schema, the following is an example of the syntax structure to
grant permissions on the entire INUSER schema to a specific user:
GRANT SELECT [INSERT, UPDATE, DELETE] ON SCHEMA :: inuser TO reports;
The following is an example of a working statement:
GRANT SELECT ON SCHEMA :: inuser TO reports;
only SELECT privs on the entire INUSER schema to the reports user.
GRANT SELECT, INSERT, UPDATE, DELETE ON SCHEMA :: inuser TO reports;
FULL privs on the entire INUSER schema to the reports user.
-- To Grant
-- To Grant
To grant permissions at the object level:
Important You must execute this statement before updating your system.
1. Execute the MSSQL_Get_INOW6_Privs.sql script and save the output.
2. After the database has been upgraded, manually execute the permission statements that are
dynamically generated when you run the MSSQL_Get_INOW6_Privs.sql command.
•
For Oracle databases, the INUSER user needs the execute privilege on the DBMS_RANDOM
package. Before running the database incremental script, you must connect to the INOW6 database
as SYS and execute the statement to grant the execute permission:
SQL> grant execute on DBMS_RANDOM to inuser;
The incremental will not complete without this.
Starting in version 6.7.0.2787, the INEMUSER schema was added to the database to hold the
IN_EXTERN_MSG_SEQ table. This isolates the table from the rest of the INUSER schema. For SQL
Server, the INEMUSER schema is owned by the INUSER user and has full privileges on the schema. For
Oracle, in addition to the IN_EXTERN_MSG_SEQ table, a sequence and trigger are created in the
INEMUSER schema that is used for populating the table with sequential numbers. For Oracle, privileges
should be granted on the INEMUSER objects to the INUSER user. If any database backup or replication
jobs are schema based, they should be modified to include the INEMUSER schema.
Windows operating systems
•
When you update your ImageNow system on Windows, perform the update steps as the
administrator user account used when ImageNow was originally installed. If this account is no longer
ImageNow Server and Client Update Guide 6.7.x
Page 6 of 55
available, and you licensed your version of ImageNow per machine rather than per user, you can use
a local administrator account.
Upda ting ImageNow Ser ver
This release contains updates to the ImageNow Server on Windows or UNIX running an external SQL
database, such as Oracle or Microsoft SQL. Follow the steps in the procedure below that describes your
environment and DBMS.
Note Before beginning an update of your ImageNow Server, perform a backup of your database. For
more information on backing up a database, refer to the ImageNow Best Practices for <database>
document, which is available in the Product Documentation tab in the Customer Portal on our website.
Updating ImageNow Server on Windows
Perform the steps in this section to update your ImageNow Server from 6.x to 6.7 on a Windows
operating system.
Note Before you begin these procedures, perform a backup of your database. For more information on
backing up a database, refer to the ImageNow Best Practices for <database> document, which is
available in the Product Documentation tab in the Customer Portal on our website.
1. Verify your ImageNow Version.
2. Reset working workflow items.
3. Stop ImageNow services.
4. Back-up your settings.
5. Download updated files.
6. Update the SQL or Oracle database.
7. Remove INUSER schema sysadmin server role.
8. Update the ImageNow Server.
9. Verify your ImageNow database.
Verify your ImageNow version
Before you begin your update, verify your current version of ImageNow 6. To look up this information,
view the properties for the inserver.exe file.
To perform this procedure in Windows 7, complete the following steps:
1. In Windows Explorer, navigate to the inserver.exe file. The default location for this file is
[drive]:\inserver6\bin.
2. Right-click inserver.exe and select Properties.
3. In the Properties dialog box, click the Details tab to view the file version.
ImageNow Server and Client Update Guide 6.7.x
Page 7 of 55
Reset workflow items
Before you stop your ImageNow services, to reset any workflow items in a working state, complete the
following steps.
1. Click Start, and then click Run.
2. In the Run dialog box, type cmd and then click OK.
3. In the Command Prompt window, change to the [drive:]\inserver6\bin directory.
4. Run the following INTool command:
intool --cmd reset-item-status
Stop ImageNow services
To update your system, you must stop the ImageNow services. The ImageNow Server installation wizard
automatically stops the ImageNow services, but you can also complete the following steps to stop all
services manually.
Note Close all services and client connections before you stop INServer, including any remote agents.
1. Open the Services dialog box.
•
In Windows 7, to locate the Services dialog box, from the Control Panel, click Administrative
Tools, and then click Services.
2. Right-click the ImageNow service and click Stop.
Back-up your settings
When performing an upgrade, the system automatically retains your customized settings in the INI files.
However, we recommend backing up these files as a safety precaution to ensure you retain your unique
customizations. Complete the following action.
•
Copy your INI files to a directory other than inserver6, for example [ drive:]\tmp.
Download updated files
To update your ImageNow build, you must download the updated version of ImageNow Server,
ImageNow Client, the database incremental files, and any additional agents that comprise your
ImageNow suite. Complete the following steps to download the updates:
1. Access the Perceptive Software web site at www.perceptivesoftware.com, click Customer Portal,
and then click Downloads.
2. Search for the ImageNow Server, ImageNow Client, and Database files for the 6.7 version that
correspond with your platform and database.
3. Unzip and save these files locally so you can access them during the update procedures.
4. Optional. Search for and save the files for any additional agents that are relevant to your ImageNow
configuration.
ImageNow Server and Client Update Guide 6.7.x
Page 8 of 55
Update the SQL or Oracle database from 6.x to 6.7
You must run the appropriate incremental files for your database application and the current version of
ImageNow Server. Follow the instructions appropriate for your RDBMS for running an incremental
database upgrade script. A qualified DBA should perform this action. For more information on best
practices for your database, refer to the ImageNow Best Practices for <database> guide that is available
in the Product Documentation tab in the Customer Portal on our website.
Notes
If you are updating an Oracle database you may choose to delete and temporarily disable the Oracle
recycle bin prior to running the upgrade script. This prevents potential errors related to objects that exist
in the recycle bin.
ImageNow Server must be on the latest version of 6.6.x before updating the database. For more
information on updating ImageNow Server, refer to the Update ImageNow Server section of this
document.
1. Click Start, and then click Run.
2. In the Run dialog box, type cmd and then click OK.
3. In the Command Prompt window, change to the [ drive:]\inserver6\bin directory.
4. Run the following INTool command to view the incremental version of the database you are running:
intool --cmd get-db-version
5. Access the database incremental files you downloaded from the Customer Portal and apply each
6.x.x incremental file individually in order from the current version of your database to the latest
ImageNow_Incremental-< database type >_6.6_to 6.7.0.x file. This updates your system to the
latest 6.7 version so you do not need to run any additional 6.7 incrementals.
Note The ImageNow_Incremental-< database type >_6.6_to_6.7.0.xxx.sql incremental puts the
INOW6 database in SINGLE_USER mode and enables Snapshot Isolation and Row Versioning are
enabled. The current upgrade connection remains active. The system stops, rolls back, and then
disconnects any other connections to the database to complete the READ_COMMITED_SNAPSHOT
command. The system then returns the database to MULTI_USER mode and executes the rest of
the script.
Current Version
of ImageNow
Incremental Database Files for SQL
6.3.x
Incremental-SS_6.3.0.119_to_6.4.1.4.sql
Incremental-SS_6.4_to_6.5.0.355.sql
Incremental-SS_6.5.0.335_to_6.5.1.19.sql
Incremental-SS_6.5.1.19_to_6.5.1.221.sql
Incremental-SS_6.5.1_to_6.6.0.237.sql
ImageNow_Incremental-SS_6.6_to_6.7.0.3158.sql
ImageNow Server and Client Update Guide 6.7.x
Page 9 of 55
Current Version
of ImageNow
Incremental Database Files for SQL
6.4.x
Incremental-SS_6.4_to_6.5.0.355.sql
Incremental-SS_6.5.0.335_to_6.5.1.19.sql
Incremental-SS_6.5.1.19_to_6.5.1.221.sql
Incremental-SS_6.5.1_to_6.6.0.237.sql
ImageNow_Incremental-SS_6.6_to_6.7.0.3158.sql
6.5.x
Incremental-SS_6.5.0.335_to_6.5.1.19.sql
Incremental-SS_6.5.1.19_to_6.5.1.221.sql
Incremental-SS_6.5.1_to_6.6.0.237.sql
ImageNow_Incremental-SS_6.6_to_6.7.0.3158.sql
6.6.x
ImageNow_Incremental-SS_6.6_to_6.7.0.3158.sql
Current Version
of ImageNow
Incremental Database Files for Oracle
6.3.x
ImageNow_Incremental-ORA_6.3.0.119_to_6.6.0.237.sql
ImageNow_Incremental-ORA_6.6_to_6.7.0.3158.sql
6.4.x
ImageNow_Incremental-ORA_6.4_to_6.6.0.237.sql
ImageNow_Incremental-ORA_6.6_to_6.7.0.3158.sql
6.5.x
ImageNow_Incremental-ORA_6.5.1_to_6.6.0.237.sql
ImageNow_Incremental-ORA_6.6_to_6.7.0.3158.sql
6.6.x
ImageNow_Incremental-ORA_6.6_to_6.7.0.3158.sql
6. Proceed to the Remove INUSER schema sysadmin server role section.
Update the SQL or Oracle database in 6.7
You must run the appropriate incremental files for your database application and the current version of
ImageNow Server. Follow the instructions appropriate for your RDBMS for running an incremental
database upgrade script. A qualified DBA should perform this action. For more information on best
practices for your database, refer to the ImageNow Best Practices for <database> guide that is available
in the Product Documentation tab in the Customer Portal on our website.
Note If you are updating an Oracle database you may choose to delete and temporarily disable the
Oracle recycle bin prior to running the upgrade script. This prevents potential errors related to objects
that exist in the recycle bin.
1. Click Start, and then click Run.
2. In the Run dialog box, type cmd and then click OK.
ImageNow Server and Client Update Guide 6.7.x
Page 10 of 55
3. In the Command Prompt window, change to the [ drive:]\inserver6\bin directory.
4. Run the following INTool command to view the incremental version of the database you are running:
intool --cmd get-db-version
5. Access the database incremental files you downloaded from the Customer Portal and apply each
incremental file individually in order from the current version of your database to the latest
incremental.
Current Version
of ImageNow
Incremental Database Files
6.7.x
Incremental-<database type>_6.7.0.2475_to_6.7.0.2787.sql
Incremental-<database type>_6.7.0.2787_to_6.7.0.2836.sql
Incremental-<database type>_6.7.0.2836_to_6.7.0.2922.sql
Incremental-<database type>_6.7.0.2922_to_6.7.0.3009.sql
Incremental-<database type>_6.7.0.3009_to_6.7.0.3158.sql
Remove INUSER schema sysadmin server role
Important Complete the steps in this section prior to updating the ImageNow Server.
In ImageNow Server 6.7, all ImageNow tables and indexes reside in the INUSER schema. You must
ensure that the INUSER schema does not have the sysadmin server role granted to it. If the INUSER
schema has the sysadmin server role, this role sets the default schema as the database owner instead
of the INUSER schema. As a result, ImageNow Server might not start, and connections to the INOW6
database cannot query the ImageNow tables. Use the following instructions to remove the INUSER
schema sysadmin server role.
1. Open SQL Server Management Studio.
2. Connect to the server hosting the SQL Server instance that contains the INOW6 database.
3. In Object Explorer, expand Security, and then expand Logins.
4. Right-click inuser, and then click Properties.
5. On the Login Properties – inuser dialog box, click Server Roles.
6. In the Server roles area, uncheck sysadmin.
7. Click OK.
8. Close SQL Server Management Studio.
ImageNow Server and Client Update Guide 6.7.x
Page 11 of 55
Update ImageNow Server
Complete the following steps to update ImageNow Server. For more detailed information about installing
the ImageNow Server, refer to the ImageNow Server Installation and Setup Guide located in the
Customer Portal on our website.
1. Double-click the ImageNow Server <64 or 32-bit> for MSSQL and Oracle <patch number> file to
run the ImageNow Server installer.
Notes
•
If you have User Account Control (UAC) with your Windows operating system, right-click the
installer and select Run as Administrator.
•
During this installation, a message appears to inform you that this is an update. If you do not
receive this message, stop the installation and verify that you are logged on as the same
Administrator user account used when ImageNow was originally installed.
2. Compare the previous INI files from your backup copy of the /inserver6/etc directory with the new
INI files in /inserver6/etc. The Windows installer automatically adapts your previous settings to the
new settings; however, the installer overwrites any custom comments, settings, or notes that you
might have previously added. Alter the new INI files in /inserver6/etc as needed.
Verify your ImageNow database
Before proceeding, use the following procedure to verify your ImageNow database. The INTool
command you run in this procedure displays any differences between the latest version of the
ImageNow database and the one you are currently using.
1. Click Start, and then click Run.
2. In the Run dialog box, type cmd and then click OK.
3. In the Command Prompt window, change to the [ drive:]\inserver6\bin directory.
4. Enter the following command at the prompt:
intool --cmd db-schema-validation
Text describing the validation appears on the screen. If you see the message: Database validated. No
inconsistencies detected, your database is aligned and you do not need to do anything further to
update the database. If you get any other message, contact Product Support and provide them with a
copy of any message you received.
Updating ImageNow Server on UNIX
Perform the steps in this section to update your ImageNow Server from 6.x to 6.7 on a UNIX operating
system. Before you begin, verify the version of ImageNow that you are running.
Note Before beginning an update of your ImageNow Server, perform a backup of your database. For
more information on backing up a database, refer to the ImageNow Best Practices for <database>
document, which is available in the Product Documentation tab in the Customer Portal on our website.
1. Reset working workflow items.
2. Stop ImageNow services.
3. Back-up your settings.
4. Update the ImageNow Server.
ImageNow Server and Client Update Guide 6.7.x
Page 12 of 55
5. Update the ImageNow Database.
6. Install AIX and Linux library files.
7. Restart the ImageNow Services.
8. Verify your ImageNow database.
Reset workflow items
Before you stop your ImageNow services, to reset any workflow items in a working state, you must run
the following command:
./intool –-cmd reset-item-status
Stop ImageNow services
From /inserver6/bin, stop all ImageNow services. All services and client connections must be closed
before inserver is stopped, including any remote agents.
1. To determine which services are running:
./inserver -s
2. To stop all services:
./<agent name> -k
Note After you have completed an upgrade to 6.7, you can use the following command to stop all
running services:
./inserver –ka
Back-up your settings
Back up your configuration files to ensure you retain your unique customizations.
•
Perform the following action to copy the contents of /inserver6/bin and /inserver6/etc directory to a
backup directory:
cp -R /inserver6/bin /<path to backup directory>
Update ImageNow Server
Complete the following steps to update ImageNow Server. For more detailed information about installing
ImageNow Server, refer to the ImageNow Server Installation and Setup Guide, which is available in the
Product Documentation tab in the Customer Portal on our website.
1. Use the mv command to move the ImageNowServer-ExternalDB_BUILD#.tar.gz file to the /inserver6
directory.
2. From /inserver6, unzip and tar the installer file.
gunzip ImageNowServer-ExternalDB_BUILD#.tar.gz
tar –xvf ImageNowServer-ExternalDB_BUILD#.tar
3. From the inserver6 directory, issue the following command to change ownership:
chown –R root:bin *
4. Compare the previous INI files from your backup copy of the /inserver6/etc directory with the new
INI files in /inserver6/etc.
ImageNow Server and Client Update Guide 6.7.x
Page 13 of 55
Update the ImageNow Database
Run the appropriate DDL script for your database application. Follow the instructions appropriate for
your RDBMS for running an incremental database upgrade script. This should be performed by a
qualified DBA. Apply each incremental file individually in order from the current version of your database
to the most updated incremental.
1. From the /inserver6/etc directory, configure the odbc.ini file and the odbc section of the inow.ini
file. Make sure you supply the same name for the protocol name in both INI files. Supply your install
directory, database name (INOW6 by default), and host name to replace the following text shown in
blue.
Update the odbc.ini file as shown below.
[ODBC Data Sources]
SQLServer Wire Protocol=DataDirect 7.0 SQL Server Wire Protocol
[SQLServer Wire Protocol]
Driver=[INSTALL_DIR]/odbc/lib/IUmsss24.so
Description=DataDirect 7.0 SQL Server Wire Protocol
Database=[db name]
LogonID=inuser
Password=imagenow
Address=[sqlserverhost name],1433
QuotedId=No
AnsiNPW=No
[ODBC]
Trace=0
TraceFile=[INSTALL_DIR]/log/odbctrace.out
TraceDll=[INSTALL_DIR]/odbc/lib/odbctrac.so
InstallDir=[INSTALL_DIR]/odbc
ConversionTableLocation=[INSTALL_DIR]/odbc/tables
UseCursorLib=0
2. Update the odbc section of inow.ini file as shown below.
[ODBC]
odbc.dbms=Sqlserver
odbc.dsn=[SQLServer Wire Protocol]
odbc.userid=inuser
odbc.password=jnbhfopx
odbc.use_dddriver=TRUE
3. Setup key environment variables by sourcing the setenv.sh script from the /inserver6/bin directory.
Note This step is necessary every time a new login session is established.
. ./setenv.sh
4. Navigate to the /inserver6/bin directory and un-tar the upgrade_scripts.tar file.
tar -xvf upgrade_scripts.tar
5. Run the correct upgrade_6x_to_6x.sh file depending on your existing version and the one to which
you are updating.
./upgrade_6x_to_6x.sh
6. Review the update log. This file is located in /inserver6/log directory and is named
intool_Primary_<date>.log. The log contains the changes performed by the update steps. Verify that
no errors are listed.
ImageNow Server and Client Update Guide 6.7.x
Page 14 of 55
Install AIX and Linux library files
For AIX and Linux, you must install the library files specified in this section. This process is not required
for Oracle Solaris.
Download UNIX supporting files
1. Access the Perceptive Software website at www.perceptivesoftware.com and log in to the Customer
Portal.
2. In the Product Downloads page, search for all downloadable items for the specific product and
version you want to use. These files may include a product installer, product documentation, or set
of supporting files.
3. Download the relevant files to a temporary directory on your computer.
Install library files
1. Navigate to the best location for your server computer to place the files from the downloaded TAR
file. This directory is referenced as <library_dir> in the remaining steps.
•
If you have enough space, the easiest directory to place these files is /usr/local/. If you use this
directory, you do not need to create a symbolic link.
•
If you do not have enough space in the recommended location, then create a subdirectory for
these files under the directory you created in the first step.
•
You can use any directory location if you have other server considerations.
2. Navigate to the directory you determined in the previous step. Create a directory on your UNIX
server to store the additional libraries required for ImageNow Server to operate properly by entering
the following command, replacing <library_dir> with the directory name you want you want to use:
mkdir <library_dir>
3. Copy the downloaded TAR file to the new directory. To unzip the file, navigate to the <library_dir>
directory, and then type gunzip –d <filename >.tar.gz, and then type tar -xvf <filename >.tar,
replacing <filename> with the name you supplied during the download. The extracted files and subdirectories appear in <library_dir>.
4. If you did not use the recommended directory of /usr/local/waspc6.5 from previous steps, create a
symbolic link from /usr/local/waspc6.5 to <library_dir>/waspc6.5 by entering:
ln -s <library_dir>/waspc6.5/usr/local/waspc6.5
Restart the ImageNow Services
1. If this is a new UNIX terminal session, source the setenv.sh file to set up your environment variables.
For example, if you are using /bin/bash, the command to source the file is: . ./setenv.sh.
2. Start ImageNow services by running `pwd`/service_name for all services in the /inserver6/bin
directory.
`pwd`/inserver –start [instance_name]
`pwd`/inserverAlarm –start [instance_name]
`pwd`/inserverBatch –start [instance_name]
`pwd`/inserverEM –start [instance_name]
`pwd`/inserverFS –start [instance_name]
`pwd`/inserverImp –start [instance_name]
`pwd`/inserverJob –start [instance_name]
ImageNow Server and Client Update Guide 6.7.x
Page 15 of 55
`pwd`/inserverMonitor –start
`pwd`/inserverMQ –start [instance_name]
`pwd`/inserverNotification –start [instance_name]
`pwd`/inserverOSM –start [instance_name]
`pwd`/inserverTask –start [instance_name]
`pwd`/inserverWorkflow –start [instance_name]
Verify your ImageNow database
Before proceeding, use the following procedure to verify your ImageNow database. The INTool
command you run in this procedure displays any differences between the latest version of the
ImageNow database and the one you are currently using.
1. In the terminal, change to the $IMAGENOWDIR6/bin directory.
2. Source the setenv.sh file. For example, if you are using /bin/bash, the command to source the file is:
. ./setenv.sh.Run the following command at the prompt:
intool --cmd db-schema-validation
Test describing the validation appears on the screen. If you see the message: Database validated. No
inconsistencies detected, your database is aligned and you do not need to do anything further to
update the database. If you get any other message, contact Product Support and provide them with a
copy of any message you received.
Updating ImageNow Client
Refer to the ImageNow Client and Server Installation Guide for your environment for information about
running the installation wizard to update your ImageNow Clients. When you update ImageNow Client,
run the same steps as if you are installing a new version. The installation wizard detects the update and
installs the product accordingly.
You can update ImageNow Client by installing the client manually, using Perceptive Enterprise
Deployment Suite (PEDS), or using a third party software distribution suite. For more information on
PEDS, refer to the Perceptive Enterprise Deployment Suite Installation Guide available on the Product
Documentation tab of the Customer Portal on the Perceptive Software website. Review the product
readme for information about enhancements and changes to ImageNow Client.
Notes
•
In previous versions of ImageNow, you used the Automatic Updater. In ImageNow 6.7, this
functionality was replaced with PEDS.
•
In previous versions of ImageNow, you used the ImageNow Server Administrator (ISA) to perform
diagnostic tasks. In ImageNow 6.7, this general functionality was included in the Diagnostics tab in
Management Console.
All existing ImageNow Client tokens are invalidated during the upgrade, and new tokens are generated
as each ImageNow Client connects to the server.
Obtain updated license files
To obtain the hardware information for the ImageNow Server, you must be the admin user on Windows.
When you update your ImageNow system from 6.x to this version, you need to acquire updated
licenses, but do not need to purchase new licenses unless you purchase additional products. You can
use ImageNow Management console or an INTool command to generate the system fingerprint.
ImageNow Server and Client Update Guide 6.7.x
Page 16 of 55
1. Start ImageNow Server. If you have an active-active setup, you must start all instances of
ImageNow Server on all nodes.
2. To generate a system fingerprint using ImageNow Management Console, complete the following
substeps:
1. Click Start, point to All Programs, point to ImageNow, and then click ImageNow Management
Console.
2. In the Login page, click License Manager.
3. In the License Management dialog box, select Save system fingerprint and click OK.
4. In the Save As dialog box, enter a name for the file and then navigate to the location where you
want to save the report. Click Save.
3. To generate a system fingerprint using INTool, complete the following substeps:
1. Click Start, and then click Run.
2. In the Run dialog box, type cmd and then click OK.
3. In the Command Prompt window, change to the [ drive:]\inserver\bin directory.
4. Enter the following command at the prompt.
intool --cmd license-sysfp
The file is saved with a SYSFP extension in the [ drive:]\inserver\bin directory.
4. Contact your Perceptive Software representative for instructions on where to send the system
fingerprint file to obtain your license. The system fingerprint file has a SYSFP extension.
5. When you receive the license files, store the license files in a temporary directory on the ImageNow
Server computer.
Install Updated ImageNow product licenses
Before entering your licenses, you must have installed the ImageNow Server and at least one ImageNow
Client. You must have Service Administrator privileges to install ImageNow licenses. The ImageNow
Client must be available on a Windows machine to install the ImageNow product licenses.
1. When you receive the license files from your Perceptive Software representative, copy them to a
temporary folder where you can access them with an ImageNow Client.
2. Upload licenses, as explained in the following substeps.
1. Click Start, point to All Programs, and then select ImageNow 6.
2. In the login page, click License Manager.
3. In the License Management dialog box, select Upload Licenses and click OK.
4. Navigate to the folder where the ImageNow license files are stored, select the LIC files to
upload, and click Open.
5. Enter the User Name, Password, and Server Location and click OK.
6. Optional. The License Upload dialog box lets you view the type name, actual license code, and
status of each license upload. To display detailed information for a specific license, select the
appropriate row.
3. Click OK.
ImageNow Server and Client Update Guide 6.7.x
Page 17 of 55
Updating Agents
You can update your agents using the procedures described in the installation guides provided for each
agent. When you update an ImageNow agent, run the same steps as if you are installing a new version.
The installation wizard detects the update and installs the product accordingly. Review the product
readme for information about enhancements and changes that apply to specific agents. The agents
listed in the following sections in this guide require additional steps.
Important If you move your ImageNow Server to a 64-bit machine, you must move any 32-bit agents
that were previously installed on the local ImageNow Server machine to remote 32-bit machines.
Updating WebNow
Review the product readme for information about enhancements and changes for WebNow. If you are
running WebNow Server in the Windows environment, refer to the WebNow Installation Guide, which is
located on our website at www.perceptivesoftware.com. The installation wizard described in the guide
updates WebNow Server in the Windows environment. WebNow 6.7.x is only compatible with
ImageNow Server 6.7.x.
If you are running WebNow Server in UNIX or prefer to use the WAR file to update your system, refer to
the following procedure. The following steps assume you have an installed version of WebNow and that
you are familiar with deploying an application to your web application server.
Important In ImageNow, version 6.2 and higher, WebNow requires Tomcat, version 6.0. If you are using
this configuration, we recommend that you install Business Insight, Forms Server, and WebNow on
separate servers to avoid conflicts that might arise by using two separate versions of the Tomcat web
application server on the same machine.
To upgrade an existing version of WebNow with the latest version manually, complete the following
steps.
1. Stop the web application server.
If you are running Tomcat, remove all files from the jsp folder, which removes the jsp cache so that
WebNow runs properly.
Back up the entire \webnow folder. For example, on Tomcat back up the \webapps\webnow
directory. You do not need to back up \work\Catalina\localhost\webnow.
2. If you are running the Tomcat web application server, delete the \work\Catalina\localhost\webnow
directory.
3. Download the WAR file as shown in the following table.
Web Server
File to download
Location to extract
WebLogic
(Windows)
weblogic-webnow.war
\bea\user_projects\domains\mydomain
WebLogic (UNIX)
weblogic-webnow.war
\applications\webnow folder.
ImageNow Server and Client Update Guide 6.7.x
Using the jar utility that comes with the Java
SDK, extract weblogic-webnow.war to the
${WL_HOME}\server\bin\applications\webnow
folder.
Page 18 of 55
Web Server
File to download
Location to extract
WebSphere
websphere-webnow.war
The web application server automatically
extracts the websphere-webnow.war file.
Tomcat
tomcat-webnow.war
\$TOMCAT_HOME\webapps folder.
4. Rename the WAR file to webnow.war.
5. Extract the webnow.war file as appropriate for your web application server. For more information
about extracting the WAR file in your web application server, refer to the WebNow Installation Guide.
6. For installs from version 6.4.x to later versions, copy the Properties folder from your backup to
<path>/webnow/properties. The Properties folder contains user preferences and user queries.
7. Configure your settings using one of the following actions:
•
For installs from version 6.2.x or earlier, compare the web.xml file in your backup to the new
WebNow.settings file and copy the settings from the older file to the new one if necessary.
•
For installs from version 6.3, compare the WebNow.settings file in your backup to the new
WebNow.settings file and copy the settings from the older file to the new one if necessary.
8. Start the web application server.
9. After verifying that ImageNow is successfully installed, you can safely remove the backup directory
as needed.
Updating ImageNow Forms Server
If you updated ImageNow Forms Server from version 6.4.x to 6.7.x, you must move the
imagenowforms.xml file from the [drive:]\Program Files\Apache Software Foundation\Tomcat
6.0\webapps\imagenowforms\WEB-INF\backup to [ drive:]\inserver6\etc. Run the installer as shown
in the ImageNow Forms Server installation instructions.
Important When you perform an upgrade from an older version to a newer version number, Perceptive
Software recommends testing forms in a test environment before implementing in a production
environment. Version 6.5 and above includes enhanced features that make this testing step mandatory if
you created worksheets or forms on any previous versions. If an error occurs on the form, contact
Product Support.
Updating Business Insight
Review the product readme for information about enhancements and changes for Business Insight. For
installation information, refer to the Business Insight Installation Guide located on the Perceptive
Software website at www.perceptivesoftware.com. Business Insight 6.7.x is only compatible with
ImageNow Server 6.7.x.
This guide only applies to updates from Business Insight 6.6.x. If you are updating from Business Insight
6.5.x, follow the procedure in the ImageNow Server and Client Update Readme 6.6.x.
When you update to version 6.7, all the reports created by your report author remain intact. Upgrading
to 6.7 of Business Insight requires you to upgrade to IBM Cognos 8.4.1 server.
ImageNow Server and Client Update Guide 6.7.x
Page 19 of 55
To upgrade an existing version of Business Insight with the latest version, complete the following
procedures on the computer where Business Insight is installed. Before updating your ImageNow Server
and Client environments, you should back up your report library.
Note To patch Business Insight version 6.7, stop the IBM Cognos service prior to running the new 6.7
patch installer.
1. Download the 6.7 set-up kit to a temporary directory.
2. To export your Report Library for back up purposes, complete the following substeps.
1. Open an Internet Explorer web browser and access the following URL, where [host name]
represents the name of the Business Insight server computer.
http://[host name]/cognos8
2. Log in to the web interface.
3. From the Launch menu, select IBM Cognos Administration.
4. On the Configuration tab, in the left pane, click Content Administration.
5. In the Administration toolbar, click New Export and complete the following substeps.
1. Enter a name, an optional description, and a screen tip for the report library archive and then
click Next.
2. Under Deployment method, select the reports you want to export and click Next.
3. Under New archive, verify the name of the archive.
4. Optional. To password protect the archive, select the Encrypt the content of the archive
check box.
5. Click Next.
6. If you opted to password protect the archive, enter the encrypted password and click OK.
7. Verify the export details and click Next.
8. Under Action, select Save and run once and then click Finish.
9. Verify the export details and click Run.
10. Click OK.
6. Access the [ drive:]/Program Files/cognos/c8/deployment directory.
7. Copy the archive you created to another file location. Keep this archive as a failsafe.
3. In Internet Information Services (IIS), stop the default website.
4. If you use an Oracle DMBS for ImageNow, do the following substeps.
1. Access the [ drive:]\Program Files\cognos\c8\webapps\p2pd\WEB-INF\lib directory.
2. Copy the JDBC driver, the ODBC.jar file, to a temporary location on your computer outside the
directory in the previous step.
5. Access the Business Insight Configuration program and click the Stop button to stop the IBM
Cognos service.
ImageNow Server and Client Update Guide 6.7.x
Page 20 of 55
6. To install the 6.7 version of Business Insight, complete the following substeps.
1. Open the 6.7 set-up kit and double-click the ImageNowBI_Setup.exe file.
2. Run the installer according to your operating system and DBMS. Refer to the Business Insight
Installation Guide available in the Product Documentation tab in the Customer Portal on the
Perceptive Software website for more information.
3. If you use an Oracle DBMS for ImageNow, do the following substeps.
1. In the Installation Wizard Completed page, clear the Launch Business Insight
Configuration check box and then click Finish.
2. Copy the ODBC.jar file from its temporary location to the <drive>:\Program
Files\cognos\c8\webapps\p2pd\WEB-INF\lib directory.
7. Access the Business Insight Configuration program and click the Run button to start the service.
8. Access the [ drive:]\Program Files\cognos\c8\bin\utilities\biintegrator directory and run the
Business Insight integration utility.
9. In Internet Information Services (IIS), start the default website.
10. Run the INTool commands to update the database enumerations and populate the calendar table.
11. For all reports created or modified by your report author, validate the report specification. For more
information on report validation, refer to the "Validate a report" topic in Business Insight Report
Studio Help.
Updating Fax Agent
To update Fax Agent, you must uninstall and reinstall in your environment. For more information on
installing Fax Agent, refer to the ImageNow Interact for Fax Agent Installation Guide that is located on
our website at www.perceptivesoftware.com.
When you update Fax Agent from a previous version, ensure you back up the btcall.cfg and the
callctrl.cfg located in the inserver6\brooktrout\config directory. Place these files in a temporary directory
away from the InServer6 directory. Run the installer according to the steps in the Fax Agent Installation
and Setup Guide. If the CFG files are missing, replace them with the files you backed up and place them
in the inserver6\brooktrout\config directory.
Updating Output Agent
To update Output Agent on Windows, run the installer according to the Output Agent Installation and
Setup Guide. To update Output Agent on UNIX, perform the following steps:
1. If this is a new UNIX terminal session, source the setenv.sh file to set up your environment variables.
For example, if you are using /bin/bash, the command to source the file is .../setenv.sh.
2. From /inserver6/bin, stop the Output Agent service. To stop the services:
./inserverOutput –stop
3. Copy the inserverOutput.ini file from the /inserver6/etc directory to a backup directory.
4. To download the latest version of Output Agent, perform the following substeps.
1. Access the Perceptive Software website at www.perceptivesoftware.com, click Customer
Portal, and then click Downloads.
2. In the Downloads page, in the right pane, in the Content section, click the Clear Search link.
ImageNow Server and Client Update Guide 6.7.x
Page 21 of 55
3. In the Downloads page, in the left pane:
1. Expand Platform and select your UNIX platform (Oracle Solaris, AIX, or Linux).
2. Expand Product and select Output Agent.
3. Expand Product Release and select 6.7.
4. In the Downloads page, in the right pane, select the check boxes for all of the following files.
•
The latest build of the Output Agent, shown by the highest Build Number.
•
AIX and Linux Supporting Files.
5. Click the Download button and then save the files to a temporary directory on your computer.
5. From /inserver6, gunzip and tar the
ImageNow_Output_Agent_VERSION#_BUILD#_for_PLATFORM.tar.gz file.
gunzip ImageNow_Output_Agent_VERSION#_BUILD#_for_PLATFORM.tar.gz
tar –xvf ImageNow_Output_Agent_VERSION#_BUILD#_for_PLATFORM.tar
6. From the inserver6 directory, issue the following command to change ownership:
chown –R root:bin *
7. Compare the previous INI files from your backup copy of the /inserver6/etc directory with the new
INI files in /inserver6/etc. The Windows installer automatically adapts your previous settings to the
new settings; however, the installer overwrites any custom comments, settings, or notes that you
might have previously added. Alter the new INI files in /inserver6/etc as needed. These changes
appear in the "Addendum B: INI Changes by Release" section of this document.
8. Start the Output Agent service by running `pwd`/service_name -start for all services in the
/inserver6/bin directory.
./inserverOutput -start
Updating Retention Agent
If you are upgrading your system to include a Retention license, the system may require you to start the
Retention Agent service manually after installing the license.
To start the Retention Agent service manually, complete the following steps.
Note Close all services and client connections before you stop INServer, including any remote agents.
1. Open the Services dialog box. In Windows 7, to locate the Services dialog box, from the Control
Panel, click Administrative Tools, and then click Services.
2. Right-click the Retention Agent service and click Start.
ImageNow Server and Client Update Guide 6.7.x
Page 22 of 55
Addendum A: Da ta base Changes b y Release
Use the following Addendum to understand the database changes required by each release. The
incremental SQL scripts listed in the steps above perform these changes in your database. Carefully
review the incremental database script for to understand the details of the changes.
Database Changes
Description of Changes
Incremental801_TO_BUILD814
For all databases:
IN_PROJ.PROJ_NAME is now varchar(128), up from varchar(40)
IN_SUBOB_ANNOT_FONT.FONT_FACE_NAME is now varchar(40), up
from varchar(16)
For Oracle 9i and 10g:
In addition to the two changes above, there is an Index Pack that is part
of the incremental that will increase performance.
Incremental-814_TO_BUILD856
For all databases:
There are several new indexes, and the columns listed below have
increased in size:
IN_SUBOB_ANNOT
ACTION_VALUE varchar2(768) (from varchar(40))
IN_SUBOB_TEMPL_PROP
PROP_VALUE varchar2(768) (from varchar(256))
IN_USR_KEY
ENC_PRIVATE_KEY varchar2(256) (from varchar(128))
Incremental-856_to_46
For all databases:
IN_BATCH_PAGE.REQUIRES_FULL_REC --> SUBMIT_TO_CONTENT
REMOVED IN_DOC.CONTENT_ID
ADDED IN_DOC.CONTENT_STATUS
NEW TABLE: IN_DOC_CONTENT
Incremental6.1.0.46_to_6.1.0.75
For all databases:
New Column: IN_SUBOB.COPYABLE
New Column: IN_SUBOB_SIG.SID_ID
Non-Required Column (now can be NULL):
IN_SUBOB_SIG.SIG_IMAGE_ID
New Column: IN_USR_PROC_CTRL.SESSION_ID
ImageNow Server and Client Update Guide 6.7.x
Page 23 of 55
Database Changes
Description of Changes
Incremental6.1.0.75_to_6.1.0.110
For all databases:
New Column: IN_ERM_DOC.ITEM_COUNT
New Column: IN_LIC_OVERDRAFT.OVERDRAFT_NUM
IN_SIG:
Removed Column: IS_VOIDED
New Column: SIG_STATUS
New Column: SIG_STATUS_TIME
Removed Column: VOID_TIME
New Column: IN_WF_ITEM_QUEUE_HIST.VISIT_COUNT
New Column: IN_WF_ITEM_QUEUE_HIST_ARCH.VISIT_COUNT
Incremental6.1.0.110_to_6.1.0.138
For all databases:
New Column: ITEMS_SKIPPED column to IN_UPGRADE_TABLE_STATS
table
New Index: IN_WF_ITEM
ImageNow Server and Client Update Guide 6.7.x
Page 24 of 55
Database Changes
Description of Changes
Incremental6.1.0.138_to_6.1.0.192
For all databases:
new table IN_EXTERN_MSG
new table IN_EXTERN_MSG_PROP
two new columns on IN_LIC table
constraints/indexes on new tables
altered column IN_DOC.CONTENT_STATUS to NOT NULL
added table IN_FAX_RECIPIENT
created index FAX_REC_IDX02 ON IN_FAX_RECIPIENT
created index VERSION_IDX03 ON IN_VERSION
created unique index WF_I_Q_H_A_IDX02 ON
IN_WF_ITEM_QUEUE_HIST_ARCH
modifying IN_SCRIPT.SCRIPT_NAME column to varchar(128) from
varchar(40)
created unique index WF_I_Q_H_A_IDX02 ON
IN_WF_ITEM_QUEUE_HIST_ARCH
modifying IN_SCRIPT.SCRIPT_NAME column to varchar(128) from
varchar(40)
Incremental6.1.1.289_to_6.1.4.25
For all databases:
widened WORKING_NAME column for table IN_PHSOB to varchar(260)
from varchar(128)
added column PRESERVE_CODE_VALS to IN_SUBOB_ANNOT table.
Incremental6.1.3.51_to_6.1.4.25
For all databases:
added index DOC_IDX9
added index PROJ_IDX_09
Incremental6.1.4 INDEX PACK
For all databases:
added index INST_PROP_IDX_03
added index INST_PROP_IDX_04
ImageNow Server and Client Update Guide 6.7.x
Page 25 of 55
Database Changes
Description of Changes
Incremental6.1.4.26_to_6.2.0.527.sql
For all databases:
IN_USR - add USR_PREFIX column
IN_USR - add USR_SUFFIX column
IN_PROJ - change PROJ_TYPE_ID NOT NULL
IN_PROJ - PROJ_NAME NOT NULL
New IN_PROJ indexes
IN_VERSION - add SIG_STATUS column
IN_DRAWER - add SIG_VERIFY_INTERVAL column
IN_DOC_TYPE - add SIG_VERIFY_INTERVAL column
New tables: IN_LM_SE_WINDOWTEXT, IN_LM_SE_IE,
IN_CONTEXT_MAP_ITEM, IN_OUTPUT_PROFILE_EMAIL,
IN_OUTPUT_PROFILE_PRINTER, IN_CONTEXT_MAP,
IN_LM_SE_HYPERLEARN, IN_LM_APP_PLAN, IN_LM_ELEMENT,
IN_LM_SE_MSWINDOWS, IN_LM_SCREEN, IN_OUTPUT_PROFILE,
IN_LM_SCREEN_CLIPBOARD, IN_LM_SCREEN_ELEMENT,
IN_LM_SCREEN_HYPERLEARN, IN_PROJ_TYPE_LIST_MEMBER,
IN_LM_SE_CLIPBOARD, IN_OUTPUT_PROFILE_FAX,,
IN_OUTPUT_PROFILE_FILE, IN_PROJ_TYPE_LIST,
IN_PROJ_TYPE_LIST
Update statements to fix flag types with values in VSL
Update statement to populate IN_VERSION.SIG_STATUS column
IN_SIG - add HASH_VAL column
IN_SIG - add HASH_TIME column
IN_SIG - add HASH_MODEcolumn
IN_SIG - add CREATION_USR_NAME column
New tables: IN_RS, IN_RS_WS_OP, IN_RS_WS_SERVICE, IN_TASK,
IN_TASK_COMMENT, IN_TASK_HIST, IN_TASK_HIST_DETAIL,
IN_TASK_TEMPLATE, IN_USR_TASK_TEMPLATE_PRIV
IN_PHSOB - add FORM_ID column
IN_BATCH - add FORM_ID_MODE column
IN_BATCH - add FORM_CONFIDENCE column
IN_VSL_USR_VAR_CONSTRAINT - add RT_VAR_ID column
IN_VSL_VAR_CONSTRAINT_VAL - add RT_VAR_ID column
IN_VSL_VAR_CONSTRAINT - add RT_VAR_ID column
IN_UPGRADE_TABLE_STATS - add TABLE_NAME column
ImageNow Server and Client Update Guide 6.7.x
Page 26 of 55
Database Changes
Description of Changes
New tables: IN_FORM, IN_LIST, IN_LIST_ITEM,
IN_LIST_MEMBER, IN_TASK_ASSIGNMENT,
IN_USR_VIEW_PRIV, IN_VIEW, IN_VIEW_COL
Changes:
IN_WF_QUEUE - QUEUE_NAME varchar(128)
IN_WF_ITEM_HIST - constraint change
IN_SIG - add column REASON_ID
IN_WF_QUEUE_ATTR - rename column REASON_USR_LIST_ID
to HOLD_REASON_LIST_ID
Update statement to fix data within REASON_ID
IN_VIEW - add unique index
New table IN_VSL_USR_VAR_CONSTRAINT_VAL
IN_TASK - removed LAST_VIEW_USR_ID and LAST_VIEW_TIME
fields
IN_VIEW_COL - add unique index with columns VIEW_ID,
SEQ_NUM
IN_WF_ITEM - add index
IN_APP_KEY:
change column APP_KEY_NAME to NOT NULL
change column APP_KEY_VALUE to NOT NULL
drop index with column APP_KEY_NAME
add unique index with column APP_KEY_NAME
IN_LIST_ITEM - change unique index to regular
IN_TASK - added 3 indexes
IN_TASK_ASSIGNMENT - add unique index
IN_TASK_HIST_DETAIL - add index
IN_LOCK - add REF_COUNT column
ERM_SPOOL - Unique index removed
Indexes added on USR, DOC, PROJ, INSTANCE_PROP, and
Task tables
ImageNow Server and Client Update Guide 6.7.x
Page 27 of 55
Database Changes
Description of Changes
table IN_BATCH
added new field called FORM_PAGE1_ONLY.
new table IN_TASK_OBJ_SUMMARY
new table IN_USR_APP_PLAN_PRIV, with some data migration
changed casing problem with "i" in name of table
IN_WF_ALARM_TIMED_ACTiON, with a couple of related
changes
new indexes in area of views
new indexes in area of IN_LIST_MEMBER
new indexes in area of Learnmode
IN_DOC - add index DOC_IDX10
New table: IN_WF_ITEM_DEST
IN_TASK_OBJ_SUMMARY - unique index change
IN_TASK - add 2 indexes
ImageNow Server and Client Update Guide 6.7.x
Page 28 of 55
Database Changes
Description of Changes
Incremental6.2.0.527_to_6.3.0.119.sql
New tables:
INUSER.IN_LM_ELEMENT_MACRO, INUSER.IN_MACRO,
INUSER.IN_MACRO_SETTING, INUSER.IN_USR_OOO_HIST,
INUSER.IN_USR_OUT_OF_OFFICE, INUSER.IN_WF_COMMENT
INUSER.IN_WF_CONTAINER, INUSER.IN_WF_ROUTE_DEST_CP
Added new indexes and constraints for these new tables.
Changes to INUSER:
In IN_WF_ROUTE, renamed COLUMN IS_ACTIVE to IS_DEFAULT.
In IN_RS_WS, added several columns.
In IN_VIEW, added a DEFAULT_ACTION NUMBER column.
In IN_WF_QUEUE_ATTR, added a Z_ORDER NUMBER column.
In IN_WF_ROUTE_DEST, added a STYLE NUMBER column.
In IN_TEMPLATE_SCRIPT, dropped the COLUMN SCRIPT_ID column.
Dropped the USER_PROC_CT_IDX02 index.
In IN_USR_PROC_CTRL, modified the IP_ADDR VARCHAR2 column.
In IN_OUTPUT_PROFILE, renamed the XPKIN_OUTPUT_PROFILE
constraint to XPKIN_OP.
In IN_OUTPUT_PROFILE_EMAIL, renamed the
XPKIN_OUTPUT_PROFILE_EMAIL constraint to XPKIN_OP_EMAIL.
In IN_OUTPUT_PROFILE_FAX, renamed the
XPKIN_OUTPUT_PROFILE_FAX constraint to XPKIN_OP_FAX.
In IN_OUTPUT_PROFILE_FILE, renamed
XPKIN_OUTPUT_PROFILE_FILE constraint to XPKIN_OP_FILE.
In IN_OUTPUT_PROFILE_PRINTER renamed the
XPKIN_OUTPUT_PROFILE_PRINTER constraint to XPKIN_OP_PRINTER.
In IN_PROJ_TYPE_LIST, renamed the XPKIN_PROJ_TYPE_LIST
constraint to XPKIN_PTL.
In IN_PROJ_TYPE_LIST_MEMBER, renamed the
XPKIN_PROJ_TYPE_LIST_MEMBER constraint to XPKIN_PTLM.
In IN_TEMPLATE_SCRIPT, dropped the FK_TS_SCRIPT_ID constraint.
Renamed the PROJ_TYPE_LIST_IDX02 index to PTL_IDX02.
ImageNow Server and Client Update Guide 6.7.x
Page 29 of 55
Database Changes
Description of Changes
IncrementalSS_6.3.0.119_to_6.4.1.4.sql
New tables:
IN_APPROVAL, IN_APPROVAL_DEF, IN_APPROVAL_DEF_USR,
IN_APPROVAL_RESPONSE, IN_CAPTURE_IP_FILTER,
IN_CAPTURE_PROFILE,
IN_CAPTURE_PROFILE_CLIENT, IN_CAPTURE_SOURCE,
IN_CAPTURE_SOURCE_FILE, IN_CAPTURE_SOURCE_SCANNER,
IN_CD_CLASS, IN_CD_RESULT, IN_CD_RUN, IN_CLASS_REL,
IN_DEVICE_KOFAX, IN_DEVICE_PIXEL, IN_DEVICE_TWAIN,
IN_IMAGE_PROC_FILTER, IN_IP_FILTER_PROP,
IN_KOFAX_ADV_PROP, IN_NODE, IN_RT_ACTION_ACCESSION,
IN_RT_ACTION_OFFLINE_TRANSFER,
IN_RT_ACTION_ONLINE_TRANSFER, IN_RT_APPROVAL_DEF,
IN_RT_AUTHORITY, IN_RT_HOLD, IN_RT_HOLD_APPROVAL,
IN_RT_HOLD_COMMENT, IN_RT_HOLD_OBJ,IN_RT_HOLD_REASON,
IN_RT_ITEM,IN_RT_ITEM_APPROVAL, IN_RT_OFFLINE_LOC,
IN_RT_PATH, IN_RT_PATH_ITEM, IN_RT_PATH_QUEUE,
IN_RT_PHASE,IN_RT_PHASE_QUEUE, IN_RT_POLICY,
IN_RT_POLICY_AUTHORITY, IN_RT_POLICY_COMMENT,
IN_RT_POLICY_OBJ, IN_RT_POLICY_OBJ_TYPE,
IN_SCAN_DEVICE,IN_TIMING_DATA, IN_TIMING_PARAM,
IN_TIMING_REPORT, IN_TIMING_SUMMARY,
IN_USR_CAPTURE_PROFILE_PRIV,
IN_USR_CAPTURE_SOURCE_PRIV,
IN_VIEW_SUMMARY_COL, IN_WF_CONTENT_QUEUE,
IN_INSTANCE_REL_TEMPTBL
Added new indexes and constraints for these new tables.
Dropped an index in IN_PHSOB
Altered tables in IN_CLASS, IN_DOC, IN_DOC_TYPE, IN_ELEMENT,
IN_FOLDER,
IN_PROJ, IN_PROJ_TYPE, IN_PROP, IN_TASK_TEMPLATE, IN_USR,
IN_VIEW, IN_WF_CONTAINER, and IN_WF_QUEUE
Created indexes in IN_DOC_TYPE,IN_PHSOB, IN_PROJ_TYPE,
IN_PROP, and IN_USR
ImageNow Server and Client Update Guide 6.7.x
Page 30 of 55
Database Changes
Description of Changes
Incremental-6.4_to_6.5.0.xxx.sql
New tables:
IN_ADDENDUM_TEMPLATE, IN_ADDENDUM_TEMPLATE_DATA,
IN_APPROVAL_DEF_ENTITY, IN_APPROVAL_SET,
IN_APPROVAL_SET_RESPONSE, IN_AUDIT, IN_AUDIT_CONDITION,
IN_AUDIT_DETAIL, IN_AUDIT_OBJ, IN_AUDIT_TEMPLATE,
IN_AUDIT_TEMPLATE_DRAWER, IN_AUDIT_TEMPLATE_ENTITY,
IN_CALENDAR, IN_CD_FORM, IN_CD_PHSOB_FORM,
IN_CONVERT_TABLE_STATS, IN_DEPT, IN_ENUM, IN_ENUM_VAL,
IN_LM_SE_DATA, IN_PHSOB_CACHE, IN_RT_HOLD_HIST,
IN_RT_HOLD_HIST_DETAIL, IN_RT_HOLD_RESOLVED,
IN_RT_PATH_OBJ, IN_RT_PATH_OBJ_APPROVAL,
IN_RT_PATH_TRIGGER, IN_RT_POLICY_ASSIGNMENT,
IN_RT_POLICY_OBJ_QUAL, IN_RT_SET, IN_RT_SET_ITEM,
IN_RT_TIME_PERIOD, IN_SC_APP_PLAN_PRIV,
IN_SC_BATCH_CREATOR_PRIV, IN_SC_CAPTURE_PROFILE_PRIV,
IN_SC_CAPTURE_SOURCE_PRIV, IN_SC_CONNECTION,
IN_SC_DEPT_PRIV, IN_SC_DOC_TYPE_PRIV, IN_SC_DRAWER_PRIV,
IN_SC_ENTITY, IN_SC_GROUP, IN_SC_GROUP_MEMBER,
IN_SC_HOLD_PRIV, IN_SC_OUTPUT_PROFILE, IN_SC_PRIV,
IN_SC_PROCESS_PRIV, IN_SC_PROJ_TYPE_PRIV,
IN_SC_QUEUE_PRIV, IN_SC_ROUTE_PRIV, IN_SC_SESSION,
IN_SC_ST_PRES_PRIV, IN_SC_SUBOB_TEMPL_PRIV,
IN_SC_TASK_TEMPLATE_PRIV, IN_SC_USR, IN_SC_VIEW_PRIV,
IN_TASK_SERIES, IN_TASK_STEP, IN_TASK_STEP_ENTITY,
IN_VSL_METHOD, IN_VSL_METHOD_PARAM,
IN_VSL_STATEMNT_METHOD, IN_WF_ACD_QUEUE,
IN_WF_APPROVAL_QUEUE, IN_WF_RT_SET_CREATION_QUEUE,
IN_WF_RT_WORK_QUEUE, IN_WF_TRANSFER_QUEUE,
IN_WS_DESIGN, IN_WS_DESIGN_FILE
Added new indexes and constraints for these new tables.
ImageNow Server and Client Update Guide 6.7.x
Page 31 of 55
Database Changes
Description of Changes
Incremental-6.4_to_6.5.0.xxx.sql
Altered tables in:
IN_ALARM.DEPT_ID, IN_APPROVAL.APPROVAL_DEF_ID,
IN_APPROVAL_DEF.APPROVAL_DEF_NAME,
IN_APPROVAL_DEF.COMPLETION_MODE,
IN_CAPTURE_PROFILE.DEPT_ID, IN_CAPTURE_SOURCE.DEPT_ID,
IN_CD_RESULT.CONTENTS, IN_DOC.DELETION_TIME,
IN_DOC.IS_PROTECTED, IN_DOC.DELETION_USR_ID,
IN_DOC.IS_UNDER_POLICY, IN_DOC.HAS_PHS_FILE_REF,
IN_DOC_TYPE.DEPT_ID, IN_DOC_TYPE_LIST.DEPT_ID,
IN_DRAWER.CATEGORY, IN_ELEMENT_TYPE.CATEGORY,
IN_FORM.DEPT_ID, IN_HOSTED_DOC.CLIENT_INSTANCE_ID,
IN_INSTANCE.EROOT_INSTANCE_ID, IN_LIST.DEPT_ID,
IN_LM_APP_PLAN.DEPT_ID, IN_LOCK.LOCKING_THREAD_ID,
IN_LOGOB.LOGOB_TYPE, IN_OSM_SET.CACHE_LEVEL,
IN_OSM_SET.CACHE_LIFETIME, IN_OSM_SET_REL.REL_TYPE,
IN_OUTPUT_PROFILE.DEPT_ID, IN_PROJ.DELETION_TIME,
IN_PROJ.DRAWER_ID, IN_PROJ.IS_PROTECTED,
IN_PROJ.DELETION_USR_ID, IN_PROJ_TYPE.DEPT_ID,
IN_PROJ_TYPE.CATEGORY, IN_PROJ_TYPE_LIST.DEPT_ID,
IN_PROP.DEPT_ID, IN_PROP.CATEGORY, IN_RS.DEPT_ID,
IN_RT_ACTION_ACCESSION.INCLUDE_ANNOTATIONS,
IN_RT_APPROVAL_DEF.APPROVAL_DEF_STATE,
IN_RT_AUTHORITY.AUTHORITY_STATE, IN_RT_HOLD.HOLD_NAME,
IN_RT_HOLD.LAST_ACTIVATION_TIME,
IN_RT_OFFLINE_LOC.PHS_FILE_TEMPL_ID,
IN_RT_PATH.PATH_STATE, IN_RT_PHASE.PHASE_STATE,
IN_RT_POLICY.POLICY_STATE, IN_RT_POLICY_OBJ.QUAL_COUNT,
IN_RT_POLICY_OBJ.POLICY_OBJ_STATE,
IN_RT_POLICY_OBJ.IS_PROTECTED,
IN_SCAN_DEVICE.FEEDER_EMPTY_PROMPT, IN_SCRIPT.DEPT_ID,
IN_SEQUENCE.DEPT_ID, IN_SUBOB_TEMPL.DEPT_ID,
IN_TASK.APPROVAL_DEF_ID, IN_TASK_ASSIGNMENT.IS_OPTIONAL,
IN_TASK_TEMPLATE.CREATION_SCRIPT_ID,
IN_TASK_TEMPLATE.RETURNED_SCRIPT_ID,
IN_TASK_TEMPLATE.COMP_PEND_REV_SCRIPT_ID,
IN_TASK_TEMPLATE.CANCELED_SCRIPT_ID,
IN_TASK_TEMPLATE.INVALID_SCRIPT_ID,
IN_TASK_TEMPLATE.ATTACH_IMAGENOW_LINK,
IN_TASK_TEMPLATE.ATTACH_WEBNOW_LINK,
IN_TASK_TEMPLATE.DEPT_ID,
IN_TASK_TEMPLATE.EMAIL_NOTIFICATION,
IN_TASK_TEMPLATE.APPROVAL_DEF_ID,
IN_TASK_TEMPLATE.TASK_TEMPLATE_CAT,
IN_VERSION.ADDENDUM_COUNT, IN_VIEW.DEPT_ID,
IN_VSL_RULE.RULE_TYPE,
IN_VSL_USR_VAR_CONSTRAINT.PARENT_ID,
IN_WF_COMMENT.TEXT_SIZE, IN_WF_CONTAINER.BORDER_COLOR,
IN_WF_PROCESS.PROCESS_TYPE, IN_WF_PROCESS.DEPT_ID,
IN_WF_QUEUE.PREFERRED_VIEWER, IN_WS_DATA_DEF.DEPT_ID,
IN_WS_FILE.DEPT_ID, IN_WS_PRES.DEPT_ID,
IN_INSTANCE_REL.ROOT_INSTANCE_ID,
IN_RT_ACTION_ACCESSION.KEEP_METADATA,
IN_RT_PATH.TRIGGER_TYPE, IN_RT_PATH.DURATION_UNIT,
IN_RT_PATH.DURATION, IN_RT_PATH.TRIGGER_RULE_ID,
IN_RT_PATH_QUEUE.PATH_QUEUE_ID,
IN_RT_PHASE_QUEUE.PHASE_QUEUE_ID
(continued)
ImageNow Server and Client Update Guide 6.7.x
Page 32 of 55
Database Changes
Description of Changes
Incremental-6.4_to_6.5.0.xxx.sql
Dropped tables:
(continued)
IN_RT_ITEM, IN_RT_ITEM_APPROVAL, IN_RT_PATH_ITEM,
IN_RT_POLICY_OBJ_TYPE, IN_WF_EXPORT_QUEUE
Renamed the following tables:
IN_APPROVAL_DEF_USR renamed to IN_DEP_APPROVAL_DEF_USR,
IN_USR renamed to IN_DEP_USR, IN_USR_BATCH_CREATOR_PRIV
renamed to IN_DEP_USR_BATCH_CREATOR_PRIV,
IN_USR_BATCH_DOC_TYPE_PRIV renamed to
IN_DEP_USR_BATCH_DOC_TYPE_P, IN_USR_BATCH_DRAWER_PRIV
renamed to IN_DEP_USR_BATCH_DRAWER_PRIV, IN_USR_PRIV
renamed to IN_DEP_USR_PRIV, IN_USR_PROCESS_PRIV renamed to
IN_DEP_USR_PROCESS_PRIV, IN_USR_APP_PLAN_PRIV renamed to
IN_DEP_USR_APP_PLAN_PRIV, IN_USR_CAPTURE_PROFILE_PRIV
renamed to IN_DEP_USR_CAPTURE_PROFILE_P,
IN_USR_CAPTURE_SOURCE_PRIV renamed to
IN_DEP_USR_CAPTURE_SOURCE_P, IN_USR_DOC_TYPE_PRIV
renamed to IN_DEP_USR_DOC_TYPE_PRIV, IN_USR_DRAWER_PRIV
renamed to IN_DEP_USR_DRAWER_PRIV, IN_USR_GROUP renamed to
IN_DEP_USR_GROUP, IN_USR_OUTPUT_PROFILE renamed to
IN_DEP_USR_OUTPUT_PROFILE, IN_USR_PROJ_TYPE_PRIV renamed
to IN_DEP_USR_PROJ_TYPE_PRIV, IN_USR_QUEUE_PRIV renamed to
IN_DEP_USR_QUEUE_PRIV, IN_USR_ROUTE_PRIV renamed to
IN_DEP_USR_ROUTE_PRIV, IN_USR_ST_PRES_PRIV renamed to
IN_DEP_USR_ST_PRES_PRIV, IN_USR_SUBOB_TEMPL_PRIV renamed
to IN_DEP_USR_SUBOB_TEMPL_PRIV,
IN_USR_TASK_TEMPLATE_PRIV renamed to
IN_DEP_USR_TASK_TEMPLATE_P, IN_USR_VIEW_PRIV renamed to
IN_DEP_USR_VIEW_PRIV
Created indexes in:
IN_APPROVAL.APP_IDX03, IN_CLASS_PROP.CLASS_PROP_IDX4
IN_DOC.DOC_IDX11, IN_DOC.DOC_IDX12, IN_DOC.DOC_IDX13,
IN_HOSTED_DOC.HOSTED_DOC_IDX03,
IN_INSTANCE.INSTANCE_IDX_03, IN_OSM_SET.OSM_CTRL_IDX05,
IN_OSM_TREE_CAS.OT_CAS_IDX03, IN_PHSOB.PHSOB_IDX06,
IN_PROJ.PROJ_IDX_10, IN_PROJ.PROJ_IDX_11,
IN_RT_AUTHORITY.RT_AUTH_IDX02, IN_RT_HOLD.RT_HOLD_IDX02,
IN_RT_HOLD_OBJ.RT_HO_IDX04, IN_RT_OFFLINE_LOC.RT_OL_IDX02,
IN_RT_OFFLINE_LOC.RT_OL_IDX03, IN_RT_PATH.RT_PATH_IDX04,
IN_RT_POLICY.RT_POLICY_IDX03, IN_RT_POLICY_OBJ.RT_PO_IDX03,
IN_RT_POLICY_OBJ.RT_PO_IDX04, IN_TASK.TASK_IDX12,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX07,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX08,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX09,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX10,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX11,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX12,
IN_TASK_TEMPLATE.TASK_TEMPL_IDX13,
IN_WF_ITEM.WF_ITEM_IDX_12,
IN_WF_ITEM_HIST.WF_ITEM_HIST_IDX05
ImageNow Server and Client Update Guide 6.7.x
Page 33 of 55
Database Changes
Description of Changes
Incremental-6.4_to_6.5.0.xxx.sql
Altered indexes in:
(continued)
DOC_IDX2.DELETION_TIME, DOC_IDX4.DOC_ID,
DOC_IDX4.DOC_TYPE_ID, DRAWERS_IDX01.DRAWER_NAME,
HOSTED_DOC_IDX02.CLIENT_INSTANCE_ID,
LOCK_IDX03.LOCKING_THREAD_ID, PROJ_IDX_06.DELETION_TIME
Dropped indexes in:
IN_INSTANCE_REL.IR_IDX04, IN_OSM_SET.OSM_CTRL_IDX03,
IN_OSM_TREE_CAS.OT_CAS_IDX02, IN_RT_HOLD_OBJ.RT_HO_IDX02,
IN_RT_PATH_QUEUE.RT_PAQ_IDX03,
IN_RT_PHASE_QUEUE.RT_PHQ_IDX03
Incremental
6.6.0.125_to_6.6.0.237.sql
Added table:
Incremental
Created tables:
6.6_to_6.7.0.2355.sql
IN_ACTION_GROUP, IN_ALARM_AGENT_STATE,
IN_CAPTURE_SOURCE_OUTLOOK, IN_CLASS_LAYOUT,
IN_DEP_TIMING_DATA, IN_DEP_TIMING_PARAM,
IN_DEP_TIMING_REPORT, IN_DEP_TIMING_SUMMARY,
IN_DOC_TYPE_LIST_REL, IN_INSTANCE_ANCESTRY,
IN_INSTANCE_SEQ, IN_JOB_AGENT_STATE, IN_LAYOUT,
IN_LAYOUT_COL, IN_LIC_REGISTERED_HW_NODE,
IN_LM_SCREEN_CONTEXT_MAP, IN_MESSAGE_QUEUE,
IN_MESSAGE_QUEUE_MASTER, IN_OSM_AGENT_STATE,
IN_PROJ_CAPTURE_PROFILE, IN_RC_ADDRESSEE,
IN_RC_EMAIL_ADDRESS, IN_RC_EMAIL_METADATA,
IN_RC_EMAIL_METADATA_ADDRESS, IN_RC_FOLDER,
IN_RC_FOLDER_POLICY, IN_RC_FOLDER_TYPE,
IN_RC_FOLDER_TYPE_LIST, IN_RC_FOLDER_TYPE_LIST_MEMBER,
IN_RC_METADATA, IN_RC_METADATA_ADDRESSEE,
IN_RC_METADATA_INSTANCE, IN_RC_PAGE_METADATA,
IN_RT_AGENT_STATE, IN_SHORTCUT, IN_TASK_AGENT_STATE,
IN_TIMING_HISTORY, IN_USR_VIEW, IN_WF_AGENT_STATE,
IN_WF_INTEGRATION_MAP, IN_WF_INTEGRATION_QUEUE
IN_LIC_TOKEN_HWFP
Altered columns in:
IN_INSTANCE New columns: CLASS_TYPE, IN_INSTANCE,
INSTANCE_NAME, CREATION_USR_ID, CREATION_TIME,
MOD_USR_ID, MOD_TIME, ADD_USR_ID, ADD_TIME,
LOCK_SESSION_ID, LOCK_REVISION_NUM, LOCK_TYPE,
DELETION_STATUS, : ACTION_GROUP_ID
IN_SC_SESSION New column: DISCONNECT_TIME
IN_TIMING_SUMMARY New columns: SERVER_ID, NODE_ID, USR_ID,
OS_USER_NAME
ImageNow Server and Client Update Guide 6.7.x
Page 34 of 55
Database Changes
Description of Changes
Created indexes in:
XIE1IN_FORM, INSTANCE_IDX_04, INSTANCE_IDX_05,
LIC_MON_IDX05, LM_SCREEN_IDX07, PHSOB_IDX07, SERREG_IDX04,
TIMING_S_IDX03, TIMING_S_IDX04, TIMING_S_IDX05, VIEW_IDX08,
WF_ITEM_IDX_13
Altered indexes in:
CMIB_IDX02, DOC_TYPE_IDX2, INSTANCE_IDX_03, TIMING_S_IDX02
Created foreign keys in:
IN_DOC new key: FK_DOC_INSTANCE_ID, IN_DRAWER new key:
FK_DR_I_ID, IN_INSTANCE new key: FK_I_AG_ID, IN_INSTANCE new
key: FK_I_S_ID, IN_LM_SCREEN new key: FK_LMS_S_ID, IN_PROJ new
key: FK_PROJ_INSTANCE_ID, IN_TASK new key: FK_T_S_ID,
IN_TIMING_SUMMARY new key: FK_TS_N_ID, IN_TIMING_SUMMARY
new key: FK_TS_S_ID, IN_VIEW new key: FK_V_S_ID, IN_WF_ITEM new
key: FK_WI_S_ID, IN_WF_PROCESS new key: FK_WFP_S_ID
Created columns in:
IN_BATCH new column: PATH_MODE, IN_BATCH_PAGE new column:
DOC_NAME, IN_CONTEXT_MAP_ITEM_BASE new column:
ITEM_LEVEL, IN_DOC new column: LEGACY_UNIQUENESS,
IN_DOC_TYPE new column: IS_RECORD_TYPE, IN_DOC_TYPE_LIST
new column: LIST_TYPE, IN_DOC_TYPE_LIST new column: COLOR,
IN_DRAWER new column: INSTANCE_ID, IN_EXTERN_MSG new
column: AGENT_LOCK, IN_EXTERN_MSG new column:
LOCK_EXPIRATION, IN_LIC_MON new column: SESSION_ID,
IN_LM_SCREEN new column: SCRIPT_ID, IN_RS_WS_OP new column:
IS_ASQ_CONSUMABLE, IN_RT_HOLD new column: HOLD_TYPE,
IN_SC_CONNECTION new column: SERVER_SESSION_ID,
IN_SC_CONNECTION new column: LAST_HEARTBEAT,
IN_SERVICE_REGISTRATION new column: INSTANCE_NAME,
IN_TIMING_DATA new column: IS_ERROR, IN_TIMING_DATA new
column: EVENT_TIME, IN_VIEW new column: MOD_SESSION_ID,
IN_VIEW new column: IS_DEFAULT, IN_WF_FLATTEN_QUEUE new
column: ALLOW_JAVASCRIPT, IN_WF_ITEM new column:
LOCK_SESSION_ID, IN_WF_PROCESS new column: IS_DELETED
Dropped tables:
IN_CD_CLASS, IN_CD_FORM, IN_CD_PHSOB_FORM, IN_CD_RESULT,
IN_CD_RUN, IN_FOLDER, IN_FOLDER_TYPE, IN_LOCK,
IN_TIMING_REPORT, IN_WORKING_ROOT
ImageNow Server and Client Update Guide 6.7.x
Page 35 of 55
Database Changes
Description of Changes
Dropped columns in:
IN_LIC_MON column: LIC_MON_STATE, IN_LIC_MON column:
LAST_UPDATE, IN_LM_SCREEN column: DOC_CONTEXT_MAP_ID,
IN_LM_SCREEN column: PROJ_CONTEXT_MAP_ID, IN_SC_SESSION
column: SESSION_HASH, IN_SC_SESSION column: LAST_HEARTBEAT,
IN_SC_SESSION column: LOGONS_ENABLED, IN_SC_SESSION
column: LOGONS_MSG, IN_TIMING_DATA column:
DATA_POINT_TYPE, IN_TIMING_SUMMARY column:
TIMING_REPORT_ID, IN_TIMING_SUMMARY column: SEQ_NUM,
IN_TIMING_SUMMARY column: EVENT_COUNT,
IN_TIMING_SUMMARY column: AVG_COST, IN_TIMING_SUMMARY
column: TOTAL_COST, IN_TIMING_SUMMARY column: STDDEV_COST,
IN_TIMING_SUMMARY column: ERROR_COUNT,
IN_TIMING_SUMMARY column: THRESHOLD_COUNT,
IN_TIMING_SUMMARY column: AVG_DATA_SIZE,
IN_TIMING_SUMMARY column: STDDEV_DATA_SIZE, IN_VIEW column:
MOD_USR_ID
Dropped indexes in:
DOC_IDX11, LIC_MON_IDX02, LIC_MON_IDX04, LM_SCREEN_IDX04,
LM_SCREEN_IDX05, PROJ_IDX_11, SC_SESSION_IDX02,
SC_SESSION_IDX04, _IDX02
Altered indexes:
DOC_IDX10, DOC_IDX12, DOC_IDX2, DOC_IDX4, DOC_IDX7,
DOC_IDX81, DOC_IDX82, DOC_IDX83, DOC_IDX84, DOC_IDX85,
DOC_IDX9, IR_IDX02, IR_IDX03, LIC_MON_IDX03, PROJ_IDX_02
PROJ_IDX_06, PROJ_IDX_06, PROJ_IDX_07, PROJ_IDX_09
PROJ_IDX_10, TASK_IDX05, TIMING_D_IDX02, TIMING_S_IDX02,
WF_PROCESS_IDX_03
Dropped foreign keys:
FK_IR_CI_ID, FK_IR_PI_ID, FK_LMS_DCM_ID, FK_LMS_PCM_ID,
FK_TS_TR_ID
Altered tables
IN_INSTANCE, IN_TASK, IN_WF_PROCESS, IN_PRODUCT_MOD_HIST,
DOC_TYPE_NAME
Missing index:
IN_INSTANCE_REL Index: IR_IDX02
IN_INSTANCE_REL Index: IR_IDX03
ImageNow Server and Client Update Guide 6.7.x
Page 36 of 55
Database Changes
Description of Changes
Incremental
New Indexes:
6.7.0.2355_to_6.7.0.2475.sql
IN_INSTANCE Index: INSTANCE_IDX_06
IN_INSTANCE Index: INSTANCE_IDX_07
Column Nullability:
IN_INSTANCE Column: CLASS_TYPE Nullable: TRUE Nullable: FALSE
Incremental
6.7.0.2475_to_6.7.0.2787.sql
Insert statements to create new System Drawers, Classes, and Instances
for Batch and Retention. Update statements to update qualifying rows to
use these new System Drawers for Batch and Retention.
Created table:
IN_EXTERN_MSG_GROUP
Created INEMUSER schema with
IN_EXTERN_MSG_SEQ table
Oracle Only:
IN_EXTERN_MSG_SEQ trigger
IN_EXTERN_MSG_SEQUENCE sequence
Incremental
6.7.0.2787_to_6.7.0.2836.sql
New index:
Incremental
6.7.0.2836_to_6.7.0.2922.sql
New index:
IN_DRAWER Index: DRAWERS_IDX02
IN_DOC Index: DOC_IDX5
Missing index:
IN_DOC Index: DOC_IDX4
Incremental
6.7.0.2922_to_6.7.0.3009.sql
New indexes:
IN_INSTANCE Index: INSTANCE_IDX_08
ImageNow Server and Client Update Guide 6.7.x
Page 37 of 55
Database Changes
Description of Changes
Incremental
6.7.0.3009_to_6.7.0.3158.sql
New indexes:
IN_DOC_TYPE Index: DOC_TYPE_IDX4
IN_FORM Index: FORM_IDX03
IN_MACRO Index: MACRO_IDX02
IN_OSM_SET_REL Index: OSR_IDX02
IN_OUTPUT_PROFILE Index: OUTPUT_PROFILE_IDX03
IN_OUTPUT_PROFILE_FAX Index: OP_FAX_IDX02
IN_PROJ_TYPE Index: PROJ_TYPE_IDX_04
IN_RS_WS_OP Index: RS_WS_OP_IDX02
IN_RS_WS_SERVICE Index: RS_WS_SERVICE_IDX02
IN_RT_POLICY_OBJ_QUAL Index: RT_POQ_IDX03
IN_SC_HOLD_PRIV Index: SC_HP_IDX02
IN_SIG Index: SIG_IDX_07
IN_TASK_HIST Index: TASK_HIST_IDX03
IN_VSL_USR_VAR_CONSTRAINT_VAL Index: VSL_UVCV_IDX02
IN_WF_ITEM_HIST Index: WF_ITEM_HIST_IDX06
IN_WF_QUEUE_ATTR Index: QUEUE_ATTR_IDX02
Incremental
6.7.0.3158_to_6.7.0.3656.sql
New index:
IN_WF_ITEM Index: WF_ITEM_IDX_08
ImageNow Server and Client Update Guide 6.7.x
Page 38 of 55
Addendum B: INI C hanges b y Release
Use the following table to understand the INI changes required by each release. The installation wizard
in Windows updates your INI files. In UNIX, you must manually add any INI changes you need that are
listed in the following list:
INI changes from 6.1.0 to 6.1.1
File Name
INI Section
Heading
Description of Change
inow.ini
[Fax Out]
Add setting:
fax.out.integration=FALSE
inserverBatch.ini
[General]
Add setting:
submit.to.content.server=FALSE
inserverImp.ini
[General]
Add setting:
submit.to.content.server=FALSE
inserverFT.ini
[Legacy]
Remove settings:
begin.link.time
end.link.time
Add settings:
begin.creation.time=max
end.creation.time=min
INI changes from 6.1.1 to 6.1.2
File Name
INI Section
Heading
Description of Change
inow.ini
[Logon
Control]
Add settings:
LDAP.ImageNow.Groups=
LDAP.ssl.cert.path=($IMAGENOWDIR6)/etc
inserverMQ.ini
[Audit]
Add settings:
(new
section)
audit.format=1
[General]
Change setting from message.pulling.interval to
message.polling.interval
login.audit.level=0
ImageNow Server and Client Update Guide 6.7.x
Page 39 of 55
INI changes from 6.1.2 to 6.1.3
File Name
INI Section
Heading
Description of Change
inow.ini
[DocLock]
Requires you to change the default value as follows for the
settings:
doclock.lock_retries=5 (change to 5 from 500)
doclock.lock_timeout=1000 (change to 1000 from 1)
inserverImp.ini
[General]
Add the default directories for the following settings:
import.failed.directory=$(IMAGENOWDIR6)/import/failed
import.complete.directory=$(IMAGENOWDIR6)/import/compl
ete
INI changes from 6.1.3 to 6.1.4
File Name
INI Section
Heading
Description of Change
inserverMQ.ini
[General]
Add settings:
sleep.interval.max=1000
sleep.interval.between.send=100
inserverWorkflow.ini
[General]
Add settings:
num.workers=5
refresh.queue.interval.seconds=600
[Workload]
Add settings:
work.load=100
work.load.route.recall=0
work.load.inbound.action=0
work.load.archive=0
work.load.unhold=0
ImageNow Server and Client Update Guide 6.7.x
Page 40 of 55
INI changes from 6.1.4 to 6.1.5
File Name
INI Section
Heading
Description of Change
inserver.ini
[Remote]
Add setting:
vsl.extended.operators.enabled
inow.ini
[Remote]
Add setting:
[ODBC]
odbc.grid.max.fetch.count=2000
[Logon
Control]
Add settings:
logon.minclientversion=0.0.0.1
logon.minclientversion.msg=Consult your system
administrator for assistance in upgrading ImageNow Client
[Locale]
Add setting:
supported.locale=en
[Auto Form]
Add setting:
auto.form.integration=FALSE
[Statistics]
Add settings:
stats.all.log.type=2
stats.all.timer.period=1800
stats.all.start.time=0
stats.all.action.length=0
stats.servercall.log.type=0
stats.servercall.timer.period=1800
stats.servercall.start.time=0
stats.servercall.action.length=0
stats.query.log.type=0
stats.query.timer.period=1800
stats.query.start.time=0
stats.query.action.length=0
stats.query.plan.threshold=1
stats.query.plan.freq=1
[Workload]
Add setting:
work.load.unhold=0
ImageNow Server and Client Update Guide 6.7.x
Page 41 of 55
INI changes from 6.2 to 6.3
File Name
INI Section
Heading
Description of Change
inow.ini
[Network]
Add setting:
ipv6.enabled=FALSE
[OSM]
Remove setting:
centera.enabled=FALSE
Inserver.ini
[Message
Queuing]
Add setting:
[Logging]
Remove setting:
Mq.agent.ip.general.override=
refresh.mode
[ClientINI]
Add settings:
(new
section)
Client.ini.sync.mode = 0
client.ini.file.path=$(IMAGENOWDIR6)/etc/clientINI/ImageNow
.ini
client.ini.search.grid.file.path=$(IMAGENOWDIR6)/etc/clientIN
I/SearchGrid.ini/
inserverBatch.ini
[General]
Remove setting:
full.text.enabled=FALSE
inserverEM.ini
[Wesley]
Remove all settings.
inserverFT.ini
[Message
Queuing]
Add settings:
mq.agent.ip.enable.override=FALSE
mq.agent.ip.address.override=
inserverImp.ini
[General]
Add settings:
num.directory.workers=1
num.import.workers= 1
[Mode
COMBO]
Change default setting:
[Readsoft]
Remove section.
Combined.inx.data.file.ext=CMX
ImageNow Server and Client Update Guide 6.7.x
Page 42 of 55
File Name
INI Section
Heading
Description of Change
[Data
Capture]
Add settings:
extension to capture = tif
bypass.qa = true
use.previous.keys.when.missing = FALSE
capture.template =
split.multipage.tiffs = TRUE
scan.user.name =
[File
Contention]
Remove setting:
[Data
Capture]
Note In this file, you can duplicate some settings, such as:
import.directory, send.to.queue, import.failed.directory,
import.complete.directory, and capture.template. We
recommend you check the INI tables provided in the
installation guide.
[Logging]
Remove settings:
sleep = 100
user.validation=1
reconnect.interval=60
job.poll.duration=2
job.poll.sleep=0
inserverMA.ini
[Message
Queuing]
New section
inserverMonitor.ini
[Defaults]
Add settings:
mq.agent.ip.enable.override=FALSE
mq.agent.ip.address.override=
Comment out the following settings and then remove the
assigned strings:
;Defaults.ToEmailAddress =
;Defaults.FromEmailAddress =
;Defaults.FromEmailAddress =
[Email]
Comment out the following setting and then remove the
assigned string:
;Email.SmtpServer =
Comment out the following setting:
;Email.Port=25
ImageNow Server and Client Update Guide 6.7.x
Page 43 of 55
File Name
INI Section
Heading
Description of Change
inserverUR.ini
[General]
Add settings:
ur.strict.user.sync.mode=0
ur.max.retry.attempts=5
ldap.is.ad.server=FALSE
inserverWorkflow.ini
[Workload]
Work.load.removal = 0
INI changes from 6.3 to 6.4
File Name
INI Section
Heading
Description of Change
inow.ini
[OSM]
Remove setting:
update.pointer.retries
Rename setting from: filesystem.minimum_required_space to:
filesystem.minimum.required.space
inserver.ini
[Timing]
timing.enabled = 1
New Section
timing.threshold.percentage = 10
timing.collection.interval = 4
timing.data.life = 14
timing.max.purge.size = 1000
timing.cleanup.period = 6
timing.purge.delay = 60
timing.category.viewer.enabled = TRUE
timing.category.viewer.report.threshold = 5
timing.category.workflow.enabled = TRUE
timing.category.workflow.report.threshold = 5
timing.category.worksheets.enabled = TRUE
timing.category.worksheets.report.threshold = 5
inserverBatch.ini
[Remote]
Remove section.
inserverMonitor.ini
[Defines]
You no longer need to append .exe to the agent names.
Add inserverTask.exe for the Task Agent.
inserverTask.ini
New File
For a description of these settings, see your ImageNow
Server Installation Guide.
ImageNow Server and Client Update Guide 6.7.x
Page 44 of 55
File Name
INI Section
Heading
Description of Change
inserverWorkflow.ini
[Workload]
Remove settings:
work.load.route.recall
work.load.inbound.action
work.load.within.action
work.load.removal
INI changes from 6.4.x to 6.5
File Name
INI Section
Heading
Description of Change
imagenow.ini
[Learn
Preferences]
Add settings:
HyperlearnDisableRemoveFocus=0
HyperlearnBringAppForward=FALSE
DisableFontSmoothing=FALSE
BatchOnlyRememberKeys=FALSE
inow.ini
[PowerVu
Settings]
document.viewer.title=Document - %DocType%
[Logon
Control]
Add setting:
[Statistics]
Change the default value for stats.wfaction.log.type from 1 to
0.
project.viewer.title=Project - %ProjectType% %ProjectName%
LDAP.ImageNow.Users
stats.query.plan.threshold=1.0
stats.query.plan.freq=1
stats.storage.log.type=0
stats.storaget.imer.period=1800
stats.storage.start.time=0
stats.storage.action.length=0
stats.job.log.type=0
stats.job.timer.period=1800
stats.job.start.time=0
stats.job.action.length=0
ImageNow Server and Client Update Guide 6.7.x
Page 45 of 55
File Name
INI Section
Heading
Description of Change
[WebNow]
Add settings:
webnow.url=http://host/webnow/
webnow.getpage=document/
inserver.ini
[General]
Add settings:
Thumbnail.max.size=100
allow.move.page=FALSE
inserverAlarm.ini
[Email]
Add setting:
queue.email.link=0
inserverFS.ini
[General]
Add settings:
batch.delete.size=500
destruction.wait.time=0
num.transfer.workers=1
inserverImp.ini
[General]
DOD_XML is now a valid value for the import.mode setting.
[Mode
DOD_XML]
Add setting:
xml.file.ext=xml
New Section
inserverNotification.i
ni
New File
For a description of these settings, refer to your ImageNow
Server Installation Guide.
inserverRetention.ini
New File
For a description of these settings, refer to your ImageNow
Server Installation Guide.
inserverWorkflow.ini
[General]
Add setting:
poll.interval=5
INI changes from 6.5.x to 6.6.x
File Name
INI Section
Heading
Description of Change
inow.ini
[OSM]
Remove setting:
centera.cache.dir
[Directory
locations]
Remove settings:
worksheet.dir
worksheet.shared
ImageNow Server and Client Update Guide 6.7.x
Page 46 of 55
File Name
INI Section
Heading
Description of Change
[Statistics]
Add settings:
stats.thread.log.type=0
stats.thread.timer.period=1800
stats.thread.start.time=0
stats.thread.action.length=0
[WebNow]
Add settings:
webnow.url=http://host/webnow
webnow.getpage=document/
[DigitalSigna
ture]
Add settings:
digIDExpireInterval=365
digSigReportDisplay=1
digSigPwdOption=FALSE
dig.sig.pwd.webnow.timeout=-1
dig.sig.pwd..imagenow.timeout=-1
dig.sig.lock.addendum.only=FALSE
inserver.ini
[General]
Remove setting:
allow.move.page=
Changed setting functionality:
num.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
[WebNow]
Remove settings:
webnow.url=
webnow.getpage=
[Network]
Remove settings:
local.hostmane.useoverride=FALSE
localhostname.override=
Add settings:
remote.hostname.useoverride=FALSE
remote.hostname.override.<hostname>=NEWNAME
ImageNow Server and Client Update Guide 6.7.x
Page 47 of 55
File Name
INI Section
Heading
Description of Change
[Timing]
Remove settings:
timing.state.removal=
timing.category.worksheets.enabled=
timing.category.worksheets.report.threshold=
[Timing]
Add settings:
timing.category.forms.enabled=TRUE
timing.category.forms.report.threshold=5
InserverImp.ini
[Mode]
Add setting:
capture.profile
InserverEM.ini
[Purge]
Add settings:
purge.complete.messages
hours.to.keep.completed.messages
purge.errored.messages
hours.to.keep.errored.messsages
InserverFP.ini
New File
Refer to your ImageNow File Processing Agent Installation
and Setup Guide.
InserverMQ.ini
[Network]
Add settings:
local.hostname.override=
local.hostnameuseoverride=FALSE
inserverWorkflow.ini
N/A
Remove the following setting:
poll.interval=
[General]
Changed setting functionality:
num.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
inserverOSM.ini
New File
For a description of these settings, refer to your ImageNow
Server Installation Guide.
[Network]
Changed setting functionality:
num.connection.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
ImageNow Server and Client Update Guide 6.7.x
Page 48 of 55
INI changes from 6.6.x to 6.7.x
File Name
INI Section
Heading
Description of Change
inow.ini
[General]
Add setting:
resource.monitor.query.timeout
[Message
Queuing]
Add settings:
mq.agent.ip.address
mq.agent.ip.port
mq.agent.ip.general.override
[Statistics]
Add settings:
stats.image.log.type
stats.image.timer.period
stats.image.start.time
stats.image.action.length
[Envoy]
New section
Add setting:
date.time.zone.enabled
[Digital
Signature]
Remove section and settings.
Remove
section
[OSM]
Remove setting:
centera.temp.dir
[Directory
Locations]
Remove setting:
user.dir
Add setting:
logging.dir
[Licenses]
Add settings:
New section
combo.imagenow.number
combo.webnow.number
combo.interact.desktop.number
inserver.ini
[Memory]
Add setting:
New section
receive.memory.threshold.mb
[Folders]
Add setting:
New section
search.in.subfolders.enable
[General]
Remove setting:
inowd.heartbeat.timeout
ImageNow Server and Client Update Guide 6.7.x
Page 49 of 55
File Name
INI Section
Heading
Description of Change
Add settings:
client.autotimeout.warning
client.alwaysdeletelocalcopy
thumbnail.max.size
thumbnail.batch.size
num.crossnode.cache.workders
navigation.thumbnails.enabled
Changed setting functionality:
num.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
[Network]
Add settings:
inowd.Primary.port
inowd.Secondary.port
[AutoUpdate]
Remove the section and associated settings.
[Timing]
Remove settings:
timing.collection.interval
timing.data.life
timing.state.removal.period
Add settings:
timing.threshold.enabled
timing.detail.purge.enabled
timing.detail.retention.period
timing.aggregation.enabled
timing.aggregate.purge.enabled
timing.aggregate.retention.period
[Business
Insight]
Add setting:
[Folders]
Add settings:
New Section
folders.move.maximum.results
business.insight.max.output.default
folders.path.delimeter
ImageNow Server and Client Update Guide 6.7.x
Page 50 of 55
File Name
inserverAlarm.ini
INI Section
Heading
Description of Change
[LearnMode]
Add setting:
New Section
pretrieve.interval
[General]
Remove setting:
polling.interval
Add setting:
num.workers
[Modem]
Remove section and settings.
Remove
Section
[Email]
Remove settings:
smtp.server
port
[Logging]
Remove setting:
debug.level.pipe
inserverBatch.ini
[General]
Remove settings:
poll.interval
number.of.server.agents
Add setting:
remove.old.service
[Logging]
Remove setting:
debug.level.pipe
inserverEM.ini
[General]
Add setting:
remove.old.service
[Expire]
Add settings:
New Section
reset.expired.messages
minutes.to.expire
inserverFS.ini
[General]
Remove settings:
num.transfer.workers
num.osm.replication.workers
max.osm.replication.retries
ImageNow Server and Client Update Guide 6.7.x
Page 51 of 55
File Name
INI Section
Heading
Description of Change
Add settings:
remove.old.service
no.work.delay.max.seconds
inserverIMP.ini
[Key
Mapping]
Remove settings:
Folder
Tab
F3
F4
F5
Add settings:
field1
field2
field3
field4
field5
[DATA_CAPT
URE]
Remove settings:
capture.template.<n>
Add setting:
import.DC.Template
[Remote]
Add settings:
heartbeat.interval
socket.login.timeout
socket.default.timeout
reconnect.interval
Remove settings:
serial.number.format
serial.number.startvalue
bypass.write.cache
[Serial
Number]
New Section
ImageNow Server and Client Update Guide 6.7.x
Add settings:
serial.number.format
serial.number.startvalue
Page 52 of 55
File Name
inserverJob.ini
INI Section
Heading
Description of Change
[OSM]
Add setting:
New Section
bypass.write.cache
[General]
Add setting:
remove.old.service
[Logging]
Remove setting:
debug.level.pipe
inserverMonitor.ini
[Logging]
Remove setting:
debug.level.pipe
inserverMQ.ini
[General]
Add setting:
remove.old.service
Remove settings:
sleep.interval.max
sleep.interval.between.send
Changed setting functionality:
num.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
[Logging]
Remove setting:
debug.level.pipe
[Network]
Add settings:
ip.bind.address
ip.bind.port
inserverNotification.i
ni
[General]
Add setting:
remove.old.service
[Logging]
Remove setting:
debug.level.pipe
ImageNow Server and Client Update Guide 6.7.x
Page 53 of 55
File Name
INI Section
Heading
Description of Change
inserverOSM.ini
[General]
Add settings:
New Section
num.transfer.workers
num.osm.replication.workers
max.osm.replication.retries
num.osm.background.workers
osm.cleanup.interval.seconds
max.osm.concurrent.leases
remove.old.service
[Network]
Changed setting functionality:
num.connection.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
inserverRetention.ini
[Notification]
Add settings:
New Section
notify.frequency
notify.weekly.day
notify.monthly.day
notify.yearly.month
notify.yearly.day
[General]
Add setting:
work.timeout.seconds
remove.old.service
[Logging]
Remove setting:
debug.level.pipe
inserverTask.ini
[General]
Add setting:
remove.old.service
[Logging]
Remove setting:
debug.level.pipe
inserverWorkflow.ini
[General]
Add settings:
num.crossnode.cache.workers
remove.old.service
ImageNow Server and Client Update Guide 6.7.x
Page 54 of 55
File Name
INI Section
Heading
Description of Change
Changed setting functionality:
num.workers
You can adjust the number of worker threads during runtime
without having to stop and restart the ImageNow Server.
[Workload]
Changed the names of the settings in this section to:
retention.removal.schedule.mode
retention.removal.schedule.start
retention.removal.schedule.duration
Remove setting:
work.load
[Logging]
Remove setting:
debug.level.pipe
ImageNow Server and Client Update Guide 6.7.x
Page 55 of 55
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising