Advertisement
Advertisement
MA750 MP3 / MP4 Digital Audio / Video Player
Instruction Manual
Reminder: Thank you for selecting our product. In order to ensure correct operation, please read this manual carefully.
1.
Instruction
(1) We try to ensure the correctness and completeness of this manual, but mistakes and omission may still exist.
(2) Our company is not responsible for any data loss caused by malpractice of software, wrong repair or other accident, or any indirect loss herein arising of.
(3) Revision to the software and hardware or user manual is not subject to further notification, and our company boasts the finial interpretation right to this manual.
(4) Don't press the screen or the buttons too hard to avoid damages to the player.
1
Content
2
5.5.3
5.5.4
FM band......................................................................................................................................... 36
Auto scan....................................................................................................................................... 36
3
4
2. Precaution
(1) Do not use this player when driving, riding or operating any other vehicles as it may lead to traffic accidents, which is illegal in some regions. Even when walking on the road, especially crossing the roads, listening with high volume is also hazardous. Please pay special attention or stop using this player in places with potential hazard.
(2) Before powering of the player, please plug in the earphone to avoid damaging the earphone as well as maintenance of the player. Turn off the player when stop using it.
(3) Keep it clean. Do not place it near heat resource or subject to direct sunlight, dust, humid or rain.
(4) If the surface becomes dusty, clean it with a soft, slightly dampened cloth. Never use any alcohol or diluted detergent to clean the cabinet.
(5) Do not use it in extra-dry environment to avoid electrostatics.
(6) Please make sure that the player will not be disconnected in the process of formatting or uploading and downloading to avoid program mistakes.
(7) When it is used as mobile disc, make sure read and write files with correct method. Any mal-operation may lead to the loss of data, which is not being responsible by our company.
(8) As the software provided by original equipment manufacturer has the optimum flash storage speed, all players with memory less than 128MB cannot be formatted as FAT-32 in the operating system.
5
(9) Attention: Because of the different memory calculating method and the player software (firmware) is stored in the device flash memory and, it will cause the difference between flash memory marked capacity and real capacity. The real flash memory capacity is lesser than the marked memory capacity of this device is normal. Due to different firmware size, it will have the different free flash memory capacity. Please refer the table as below for more details.
Marked Free capacity range after
Real capacity range capacity stored firmware
128MB 122MB~128MB 73MB
~
127MB
256MB 244MB~256MB 191MB
~
255MB
512MB 488MB~512MB 428MB
~
511MB
1GB 953MB~1000MB 879MB
~
999MB
2GB 1907MB~2000MB 1804MB
~
1999MB
4GB 3815MB~4000MB 3577MB
~
3999MB
System requirement of MP3 player:
Microsoft
®
Windows 98SE/2000/ME/XP
CPU series with Pentium 200MHZ or above
USB connector
120MB hard disk free space
CD-ROM driver
6
4. Introduction
4.1 Feature
(1)
Support formats such as MP3 WMA WAV SMV JPG BMP
This product supports playback of music files, photo browsing and movie playing with high quality.
(2)
Folder management
Easy to choose the folder or music file to play.
(3)
DRM 9 playback
This product supports WMA DRM 9 digital authorized music playback.
(4)
FM radio function
This product provides FM radio. The user can also record the favorite FM program in
WAV file.
(5)
Build-in 1.5" CSTN color screen
There is a build-in 1.5" CSTN color screen, which can display photo and movie clearly.
(6)
Removable disc
This product can be connected to PC with USB cable and serves as a removable disc.
(7)
Build-in rechargeable Li battery
Charging is convenient and no need to buy extra batteries.
(8)
Convenient firmware upgrade
The firmware can be upgraded with software downloaded from Internet or in the attached disc (if any).
7
(9)
Music album art function
This player supports to display the music album art while playing.
(2) Microphone
(4) Play / pause button /
(5) Fast forward button down
-
(10) Rewind button
(11) Volume up button+
8
This product adopts build-in rechargeable Li-Ion battery.
You can connect the MP3 player to PC or use USB adapter to charge the battery. The following pictures indicate the charging status of the battery when connects to PC:
(1) When the battery is charging, the icon will be changing from an empty battery to a full one to indicate the process.
Æ
(2) The following icon will replace the charging one when the battery is full but the power supply is not being cut off.
(3) The player will be automatically shut off when the power is used up.
(4) Power saving mode: User can define the power off mode, such as idle off, sleep off, screen off to save power. Please refer to the setting instruction in function section for details.
Note: The MP3 player only accepts the standard USB 2.0 output voltage and current to charge the built-in
Li-Ion battery: 5-Volt voltage and less than 500mA current. If the charging voltage and current are out of the compass, it will damage the battery and the MP3 player. It will be no warranty in this case. Please make sure the output voltage and current of the USB port on your PC or USB adapter before charging this player. If you found the screen is blinking during using the USB wall adapter, please use the PC USB port to charge the player instead of USB wall adapter.
9
4.4 USB driver installation
( USB driver needs to be installed only on Windows 98SE operating system is used.)
(1) Execute Setup.exe in driver CD and complete the driver installation.
(2) Reboot the PC.
(3) Connect the MP3 player to the USB port of the PC.
4.5 Connection and download
4.
5.1 Connection to PC
Plug the attached USB cable to PC, and connect the other end to the MP3 player. If the connection is successful, the screen of player will display the following picture. Note that, please don’t use USB hub or USB extended line.
10
When the connection is done, select the desired music and click the right key of the mouse and select “copy”. Double click to open the device icon of the player (i.e. “H”, the name of device may differ) and then click the right key of the mouse and select “paste”. During the process of writing, the player may display the following picture. If you want to download authorized WMA files from Internet, please refer to the section of DRM music transfer function. Note that, this MP3 player supports 500 music files or 30 folders (includes sub-folders), it will build the play list by scanning the first 500 files which stores in first 30 folders, that is sorted by letter order. So please don’t use too many folder and sub-folder to store the music files.
11
4.5.3 Remove from USB port
(1) Double click the icon of safely remove hardware on the task column, and the relevant dialog box will be displayed.
(2) On the picture of safely remove hardware dialog box, select the item of “USB mass storage device” and click “stop” button. The screen will display “Stop a Hardware Device” as point 3.
12
(4) When the screen displays “Safe to Remove Hardware”, the player can be safely removed from PC.
Special reminder:
Do not disconnect the USB cable when the data is being transmitted between PC and the player, which may damage the player and lose the data in the player. Disconnection should be conducted only when “device can now be safely removed from the system” displayed. When the
USB is in operation, other button is invalid. If the player fails to power on due to data loss or I/O mistake reminder by mal-operation, please refer to the trouble shooting section for solution.
13
Volume
ID3 information
Play mode
Balance simulation
Progress bar
Elapse time
EQ mode
Music format
Sampling rate
Play status
14
Lock
Battery level
Series NO/total NO
Bit rate
Music album art
Total duration
4.7 Menu
(1) MUSIC: Select MUSIC in the main menu, the device will enter music sub-menu.
(2) PHOTO: Select PHOTO in the main menu, the device will enter photo sub-menu.
(3) MOVIE: Select MOVIE in the main menu, the device will enter movie function.
(4) VOICE: Select VOICE in the main menu, the device will enter voice playback function.
(5) FM RADIO: Select FM RADIO in the main menu, the device will enter FM RADIO function.
(6) MIC. RECORD: Select MIC. RECORD in the main menu, the device will enter microphone record function.
(8) SETTINGS: Select SETTINGS in the main menu, the device will enter setting sub-menu.
(9) ABOUT: Select ABOUT in the main menu to check the memory status and software version of the device.
(10) EXIT: EXIT the main menu and return to the music playback function.
15
4.7.2 Selection and exit
(1) Long press play button or press power/stop button to exit and return to the upper level menu. The uppermost menu is main menu, which includes: music mode, photo mode, movie mode, voice mode, FM radio mode, record mode, delete mode, setting mode, about and exit.
(2) Select next or previous item by pressing fast forward button or rewind button . If the main menu is in music picture, press rewind button to switch to information page; if the main menu is in information page, press fast forward button to switch to music picture.
(3) Press play button to confirm and enter the selected item.
4.8 Power on and off
4.
8.1 Power on player
Press power/stop button to turn it on while the player is off. Power on images will be shown before going to the defaulted music play mode and followed by music playback. The power on time is determined by the music file number in the player.
This player supports user-defined image when power on. You can save the image file with size
128*128 pixel and named LOGO.BMP under the root directory of this device. The user-defined image will be displayed when you turn on the player on next time.
16
4.8.2 Power off player
(1) When the player is powered off, the following statuses will be saved, which includes: current mode, music elapse time, and user settings. (i.e. volume, EQ, timing off and play mode etc.)
(2) If the player is powered off normally (i.e. the user shut it off or it is shut off according to the setting), the above-mentioned modes will be saved. If the player is powered off by pressing reset button, the above-mentioned modes will not be saved.
(3) Except in record mode, long press power/stop button until the letters of Bye Bye appears and the screen will turn dark, the player will be powered off.
17
5.1 Music playback function
Press rewind button or fast forward button in the main menu to select Music function. Press play button to enter the sub-menu of Music Play All or Internal Device.
Operation instruction:
(1) When the music is stopped or played, press rewind button or fast forward button to select previous or next file.
(2) When playing the music, long press rewind button or fast forward button to move fast backward or forward within the track.
(3) When playing the music, press play button to pause and press play button again to resume the playing. Press power/stop button to stop the playing.
18
5.1.1 all
Press rewind button or fast forward button to select Play All, and press play button enter and start playing all music in the player.
to
5.1.2 device
Press rewind button or fast forward button to select Internal device
, and press play button
to enter the function of play list. Press rewind button or fast forward button to select folder or a single music and press play button to start playing. Use volume up button+ or volume down- button to enter or exit a certain folder. The player will play the selected music or all the music in a certain selected layer of folder (sub folder inclusive).
19
Play one file
Play one folder
20
The difference of playing songs in folders and playing under root directory
Play mode Under root directory
In folder and its subdirectory.
Normal Play all the songs under root directory and in folders one time and then stop.
Play all the songs in current folder one time and then stop.
Repeat one Repeat play the current song.
Repeat all Repeat play all the songs under root directory and in folders.
Repeat play the current song in current folder.
Repeat play all the songs in current folder except the songs in folder’s sub-folder.
Random Repeat play all the songs under root directory and in folders.
Rand.&Rep. Shuffle repeat play all the songs under root directory and in folders.
Repeat play all the songs under root directory and in folders.
Shuffle repeat play all the songs under root directory and in folders.
21
5.2 Photo
Press rewind button or fast forward button in the main menu to select Photo function. Press play button to enter the sub menu of Photo : Manual
,
Slide Show and Thumbnail. This player supports pictures in JPG and BMP formats. In order to get a smooth and clear display, please convert the resolution of pictures to 128x128 on PC and then put them in PHOTO folder ( If there is no PHOTO folder, please create one ).
Please be noted that the player cannot find that photo if it is not stored in PHOTO folder of the player. The PHOTO folder will be created by the software automatically if there is no PHOTO folder on the player.
22
5.2.1
After entering photo function, press rewind button or fast forward button to select manual browse and press rewind button or fast forward button to browse the photo manually.
5.2.2 show
After entering photo function, press rewind button or fast forward button to select slide show and press rewind button or fast forward button to browse the photo automatically.
23
5.2.3 Thumbnail
After entering photo function, press rewind button or fast forward button to select thumbnail display and press play button to start displaying photo in thumbnail form.
5.3 Movie
Press rewind button or fast forward button in main menu to select Movie function and press play button to enter Movie play.
(1) This player supports the playing of movie files in SMV format. Convert the desired movie (MPG, MP4, DVD, Quick time, Real player, AVI,WMV format) to SMV format with transcoder software (video2smv.exe) in the attached CD (if any) or stored in the player or downloaded from Internet.
24
(2) Movie should be put in MVIDEO folder of the player. If there is no this folder, please create one.
Please be noted that the player cannot find those movie files if they are not stored in MVIDEO folder of the player. MVIDEO folder will be created by the software automatically after power on.
(3) When the movie is playing, press volume up button + or volume down buton – to adjust the volume.
Current function
Play mode Lock state
Volume Power level
Current file No/ Total No
Title of SMV file
Sampling rate
Format
Process bar
Elapse time Leftover record time
EQ mode
Play states
25
How to transfer the movie file to SMV format by Video2smv.exe process
a. Select video2smv and double click it to enter the folder as indicates in the following figure:
26
b. Select and double click video2smv.exe program to enter as indicates in the following figure:
27
c. Click “Add” to select the files that need to be converted. You can set the size and quality at the same time. The screen resolution of this player is 128x128 pixel, please set the size less than 128*128 pixel. The higher quality produces larger SMV file size and vice versa. The higher the quality setting value, the clearer the picture will be and vice versa. Click Setting to select the directory where the converted SMV files store.
28
d. Click Convert to start the converting. Meanwhile you can click “stop” to stop transferring.
29
e. When there is Finish appears in the column of Status, it means the conversion is finished. You may close the windows and transfer the formatted movie with SMV format to the player.
Attention : If you can use the windows media player to play the video files in your PC, and the video file type is supported by video2smv, it will be able to be converted to SMV format.
30
5.4 Voice
Press rewind button or fast forward button in the main menu to select Voice function and press play button to enter that voice play function.
The following functions are provided in voice mode:
(1) Play recorded files from FM.
(2) Play recorded files from microphone.
(3) Support record files in WAV format (ADPCM),that stored in VOICE directory of the player.
Operation instruction:
(1) When in voice standby or play mode, press rewind button or fast forward button to select the previous or next voice file.
(2) When in voice play mode, long press rewind button or fast forward button to move fast backward or forward within the track.
(3) When in voice play mode, press play button to pause and press play button again to resume play. Press power/stop button to stop playing.
31
5.5 Radio
Press rewind button or fast forward button in the main menu to select FM Radio function and press play button the radio
to enter FM Radio function. Up to 10 radio stations can be stored in
Volume
Band scanning
FM audio output
Current functi on
Radio band
Locked state
Power level
FM frequency
Channel No.
Current channel
32
FM submenu instruction
(1) FM record: Support digital stereo record during FM listening.
(2) FM band: Includes 3 radio band: US-EU band (87~108MHz),Japan band (76~91MHz) , All band (76~108MHz).
(3) Auto scan function: select this item, push the or to select YES, Press the to begin scanning. It will play at the first station after scanning out all the stations in this FM band.
It will store the frequency to the stations in sequence via their signal strength. The most strong signal strength frequency will be saved to CH01.
(4) Select FM radio to return the FM function.
33
(1) Press play button to switch radio station from CH01
Æ
CH02
Æ
…
Æ
CH20(maximum),
When switching the radio station, the player will automatically save the current frequency to the current station number before skip to the next station.
(2) Press rewind button or fast forward button to fine-tune the frequency forward or backward by 0.1MHz.
(3) Long press rewind button or fast forward button to search for the radio station with the strongest signal forward or backward.
34
5.5.2
(1) During FM playing, long press button to enter the FM submenu, Press or to select the FM Record option. Press the button start FM recording. At this moment, the player will display the picture of FM record and recording icon. The recorded content is FM program but not microphone. The flashing record status icon indicating FM record is in progress; At this moment, press play button will pause recording and the icon will appear when FM record is paused. Press PLAY button again to resume
FM recording. Press power/stop button to stop the FM record. When FM recording is stopped, the picture will be changed to FM radio function. Enter VOICE function to listen to the recorded FM program.
(2) When the battery is running out of power in recording state, there will be low energy level warming. The recorded files will be saved before player exits from record state and
Current function returns to FM radio.
Locked state
Volume
Power level
Title of record file
Record progress
Elapse record time
Record state
Sampling rate
35
Bit rate
Format
Leftover record time
5.5.3
FM band
Press rewind button or fast forward button in FM band setting menu to select FM band and press play button to confirm. Long press play button
or press power/stop button to skip this setting. FM band includes: US-EU band , Japan band and All band.
5.5.4
Auto scan
Select “YES” to start FM auto scan, while select “NO” to return to the FM sub-menu. Up to 10 FM stations can be saved. All the keys will be no response during the Autoscan is executing till autoscan completed.
Note: Please plug in the earphone to the player before scanning radio station.
36
5.5.5 Radio
Select FM radio to return to the FM playing screen.
5.6 Record
Press rewind button or fast forward button in the main menu to select MIC. RECORD function and press PLAY button to start recording from the microphone.
(1) The flashing recording state icon indicates recording is in progress; At this moment, press play button , recording pause icon will appear and the microphone recording will be paused. Press PLAY button again to resume microphone recording. Press
POWER button to stop microphone recording. When the microphone recording is stopped, the interface will be changed to voice playback function.
Current function
Play mode
Volu me
Locked state
Power level
Current number/
Total number
Name of record file
Bit rate
Balance simulation
Record progress
Elapse record time
Format
Leftover record time
EQ
Record state
Sampling rate
37
(2) 7 recording sampling rate: user can set the sampling rate of recorded file. The higher the sampling rate, the better recording quality will gain. The lower the sampling rate, the more common quality will gain with longer recording duration. There are total 7 sampling rate available: 8KHz, 11KHz, 16KHz, 22KHz, 32KHz, 44KHz and 48KHz.
(3) If the memory is full during the recording, Device Full will be displayed and the player will stop recording and save the recorded files automatically. No more recording can be done in this case.
(4) If the battery is running out of power during the recording, Low Battery will be displayed and the player will stop recording and save the recorded files automatically. No more recording can be done in this case.
(5) The recorded file is defined automatically as V###.WAV, ### is a figure composed of three numbers starting with 001 for the first file and 002 for the second one…The format of recorded file is WAV.
38
5.7 Delete
Press rewind button or fast forward button
in the main menu to select Delete function and press play button to enter Delete function, which includes delete one and delete all..Note that, deleted files can’t be recovered.
5.7.1 one
Press rewind button or fast forward button to select the files that need to be deleted and press play button to confirm the deletion. Long press play button or press power/stop button to quit the deletion and return to the main menu.
5.7.2
Press rewind button or fast forward button to select if or not to delete all files in the player.
Press play button to confirm the selection. If YES
, files (WAV), movie files (SMV), user’s own files and photo files (JPG and BMP) in the player will be deleted. Long press POWER/STOP button to stop deleting, but deleted files can’t be recovered.
39
5.8
Settings
Press rewind button or fast forward button in the main menu to select Settings menu and press play button to enter Settings menu, which includes language setting, EQ setting, play mode setting, recording format setting, contrast setting, timing off setting and resume default value setting.
5.8.1 Language
Press rewind button or fast forward button in language setting menu to select language and press play button button
to confirm. Long press play
or press power/stop button to skip this setting. The following languages are available: English, Dutch, French, German, Italian, Portuguese,
Spanish, Hebrew, Poland, Hungarian, Russian. It will be difference due to different firmware version.
40
5.8.
2 EQ
Press rewind button or fast forward button in EQ setting menu to select EQ and press play button to confirm. Long press play button or press power/stop button to skip this setting. When playing music, the change of EQ can be felt in the earphone. EQ of this player includes:
Normal, Rock, Jazz, Classical, Pop, Ska, Soft Music, Soft Rock, Dance,
Full Bass and Treble, Full Treble, Large Hall, Techno, Ultra Bass, Blues,
Club, Live, Party and Reggae.
5.8.3 mode
Press rewind button or fast forward button in play mode setting menu to select play mode and press play button to confirm. Long press play button or press power/stop button to skip this setting.
The play mode of this player includes: normal, repeat one, repeat all, random and random & repeat. Random and random & repeat can only be applied to music play.
41
5.8.4
Press rewind button or fast forward button in Record Type setting menu to select recording format and press play button to confirm.
Long press play button or press power/stop button to skip this setting. This setting is used to set the sampling rate of microphone recording. The available recording formats for this player are: 8KHz,
11KHz, 16KHZ, 22KHz, 32KHz, 44KHz and 48KHz.
5.8.5 Contrast
Press rewind button or fast forward button in the contrast setting menu to select contrast and press play button to confirm. Long press play button or press power/stop button to skip this setting.
42
5.8.6 off
Press rewind button or fast forward button in timing off setting menu to select timing off and press play button to confirm. Long press play button or press power/stop button to skip this setting. The sub menus of timing off are: stop off, sleep off, backlight off and key lock.
After the user set the key lock time, in music or voice playback mode, or listening to FM radio, all button operations will not work if the user doesn’t press any key after the setting time is passed. The screen will display a lock icon (as below figure). You have to press the POWER button to unlock and the lock icon will disappear. The key lock also can be locked by pressing and holding VOLUME DOWN button and
PLAY button simultaneously.
5.8.7 Reset
Select "Yes" to restore all settings to default value and the player will be automatically reset (V3.07 later firmware version).
43
5.9 About
Press rewind button or fast forward button in the main menu to select ABOUT and press play button to enter About. You can check the total memory capacity, free space and version of the software.
5.10 Exit
Exit and return to the music playback function.
44
If there is no picture displayed after the player is connected to PC and cannot serve as a storage device or cannot be powered on after the battery is fully charged, please refer to the following steps to update the software in the player.
(1) Download the most updated software from the attached CD (if any) or from the website and execute the setup.exe files in the folder to complete the installation.
(2) Long press power button of the player for five seconds and then plug in the USB cable.
(3) Execute the updated software installed by step (1) to start software upgrade and release the Power/Stop button.
(4) The upgrade of software may format the player, so please copy the music or files in the player to PC first.
(5) If the software upgrade program cannot detect the player, please unplug the USB cable and repeat step (2) and (3) until the player is detected and the software upgrade is completed.
45
7. DRM music transfer function
7.1 Download operation of WMA music with DRM9 (PD-DRM) protection
(1) On Window 98SE / Window ME / Windows 2K / Windows XP, music with DRM should be transferred by Windows Media Player version
9.0 or 10.0 (Version 10.0 is for Windows XP only) to mp3 player.
(2) Other download operation probably will cause the mp3 player can not read and play the music with WMA DRM file.
(1) On Window 98SE / Window ME / Windows 2K / Windows XP, users should upgrade
Windows Media Player to version 9.0 or 10.0
(Version 10.0 is only for Windows XP).
(2) System might request to download the license in case if the user does not download the music with DRM properly from the web site. In this case, the user needs to download the license from music publisher as instruction of Microsoft Website showing in the operating window.
(3) On Windows Media Player version 10.0 (Windows XP only)
46
A. Connect player to PC.
B. Choose the desired WMA music with DRM.
47
C. Click Right button of the mouse and choose “Add to Sync list”.
D. On the open window, choose “Sync” option.
48
E. On “Sync” window, choose the desired WMA music with DRM as step B and choose
“Removable Disk”.
49
F. Click “Start Sync“ to transfer the WMA music with DRM to player.
50
8. Specification
Technical
Specification
Capacity
MP3 bit rate
Photo format
Sampling rate
Recorded format
32~320Kbps
JPG, BMP
8/11/16/22/32/
44/48KHz
WAV (ADPCM)
Music format
Movie format
Frequency response
Dynamic current
MP3, WMA
SMV
20Hz~20KHz
<70mA (play mp3 music & backlight OFF)
Maximun recording duration
(8KHz, 32kbps) 128MB: 9 hours
256MB: 18 hours
512MB: 36 hours
1G: 72 hours
2G: 144hours
4G: 288hours
>90db
Power off current <500uA
SNR
Dynamic scope
>80db
(
1KHZ
)
Dimension
Weight
91*41.4*8.9mm
40g
Distortion <0.05% Screen
1.5"CSTN 128x128 65K color screen
Output power
Music number limitation
5mW*2
500 files or
30 folders
Battery
Playback duration
Rechargeable Li-Ion battery
<10 hours
Working environment
Humidity <85%,
-10~40 Celsius
USB port USB1.1/ 2.0 Full Speed
□ 128MB □ 256MB □ 512MB □ 1GB □ 2GB □ 4GB
51
Listening caution
Do not play your headphones or earphones at a high volume.
Hearing experts advise against continuous extended play.
If you experience a ringing in your ears, reduce volume or discontinue use.
Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
Even if your headphones or earphones are the open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you can’t hear what’s around you.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
Leave it there.
Precautions:
1). When not using the player for an extended period of time, remove the batteries to avoid damage due to leakage.
(
Apply to Models that come with AAA or AA battery)
2). Do not use the player in extremely hot, cold, dusty or damp environments.
3). Make sure the HOLD key is in the unlock position before using the player (otherwise controls will not function).
4). Avoid dropping or striking the unit .This may cause external and internal physical damage to the player.
5). Replace battery with new one if: (Apply to Models that come with AAA or AA battery)
a) The battery level icon displays
(An empty battery) b) The players powers off automatically and off again when restarted.
c) No response when pressing keys with HOLD off and battery installed
6). To prevent damage from static shock, never use the player in very dry conditions.
7). When player is being formatted or transferring a file, do not interrupt the connection.
Otherwise, data may be corrupt of lost.
8). When the player is used as a portable HD, please use only per instructions. Otherwise, permanent data loss could occur.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
◆ Reorient or relocate the receiving antenna.
◆
Increase the separation between the equipment and receiver.
◆
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
◆
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
◆ To assure continued compliance, following the attached installation instructions.
◆
Use only the provided shielded the interface cables when connecting to computer.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This product may receive radio interference caused by mobile telephones or other products during operation. If such interference is apparent, please increase separation between the product and the mobile telephone or other product.
This product may receive radio interference caused by mobile telephones or other products during operation. If such interference is apparent, please increase separation between the product and the mobile telephone or other product.
Industry Canada Requirement:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada
◆ Other names of system and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned.
The
TM and ® are not used to identify registered trademarks and trademarks in these instructions.
This manual was correct and complete at the time of printing. However, specifications and updates can occur at any time without prior notice.
No part of this manual may be copied, republished, reproduced, transmitted or distributed in any way without prior written consent of Nextar, Inc. Any unauthorized distribution of this manual is expressly forbidden.
© 2008 Nextar (Hong Kong) Limited. Nextar is a trademark and service mark of Nextar (Hong Kong) Limited. All other
brand names, trademarks and service marks are property of their owners.
Nextar may find it necessary to modify, amend or otherwise change or update this manual.
We reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice. All screen shots shown are simulated and may not represent the actual screen on production units sold to consumers.
For instruction manuals, updated drivers or other information, be sure to visit our website at: www.Nextar.com
Or write us at:
Nextar
1661 Fairplex Dr.
LaVerne, CA USA 91750
Copyright © 2008

Public link updated
The public link to your chat has been updated.
Advertisement