MP-45t - Boxlight Mimio

MP-45t - Boxlight Mimio
USER’S GUIDE
BOXLIGHT MP-45t
TO THE OWNER
Before operating this projector, read this manual thoroughly and operate the projector properly.
This projector provides many convenient features and functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try
the solutions in the “TROUBLESHOOTING” section at the end of this booklet. If the problem still persists, contact
BOXLIGHT.
SAFETY PRECAUTIONS
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
● This projector produces intense light from the projection lens. Do not stare directly into the lens as it could
damage your eyes. Be especially careful that children do not stare directly into the beam.
● Do not use projectors with whiteboards that produce a very bright glare or 'hot spot'. This is most common on
shiny surfaces.
● This projector should be used as described in this manual. If not, it may result in a fire hazard.
● Provide appropriate space on the top, sides and rear of the
projector cabinet for allowing air circulation and cooling the
projector. If the projector is to be built into a compartment or
similarly enclosed, the minimum distances must be maintained.
Do not cover the ventilation openings on the projector. Heat buildup can reduce the service life of your projector, and can also be
dangerous.
SIDE and TOP
REAR
20cm
50cm
50cm
50cm
● Do not put any flammable objects such as spray cans near the projector, hot air is exhausted from the
ventilation openings.
● The Remote Control, supplied with this projector, emits a laser beam from the Laser Light Window while
pressing the LASER button (the LASER POINTER INDICATOR lights red to indicate laser emission). Do not
look into the Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result.
● If the projector is not to be used for an extended time, unplug the projector from the power outlet.
READ AND KEEP THIS USER'S GUIDE FOR LATER USE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
2
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
USER'S GUIDE WITH THIS UNIT.
SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturer.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally according to the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician uses replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask
the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Voor de klanten in Nederland
Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn,
moet u ze niet weggooien
maar inleveren als KCA.
3
COMPLIANCES
Federal Communication Commission Notice
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
Responsible party
Address
Telephone No.
: BOXLIGHT MP-45t
: Boxlight
: BOXLIGHT
: 19332 Powder Hill Place Poulsbo, WA 98370-7407 USA
: (800)762-5757 or +1-360-779-7901
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirements for use in the country you purchased it.
AC Power Cord for the United States and Canada :
The AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure
that the plug will fit into the power outlet. Do not defeat this safety feature. Should you be
unable to insert the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
4
TABLE OF CONTENTS
FEATURES AND DESIGN
PREPARATION
NAME OF EACH PART OF PROJECTOR
SETTING-UP PROJECTOR
6
7
7
8
CONNECTING AC POWER CORD
POSITIONING PROJECTOR
ADJUSTABLE FEET
PROPER PROJECTOR INSTALLATION
MOVING PROJECTOR
8
9
10
10
11
CONNECTING PROJECTOR
12
TERMINALS OF PROJECTOR
CONNECTING TO COMPUTER
CONNECTING TO VIDEO EQUIPMENT
12
13
14
COMPUTER INPUT
SELECTING INPUT SOURCE
SELECTING COMPUTER SYSTEM
PC ADJUSTMENT
AUTO PC ADJUSTMENT
MANUAL PC ADJUSTMENT
PICTURE IMAGE SELECT
IMAGE LEVEL SELECT
PICTURE SCREEN ADJUSTMENT
VIDEO INPUT
SELECTING INPUT SOURCE
SELECTING VIDEO SYSTEM
PICTURE IMAGE SELECT
IMAGE LEVEL SELECT
PICTURE SCREEN ADJUSTMENT
PICTURE IMAGE
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
LASER POINTER FUNCTION
REMOTE CONTROL BATTERIES INSTALLATION
TOP CONTROLS AND INDICATORS
OPERATING ON-SCREEN MENU
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU OPERATION
MENU BAR
BASIC OPERATION
TURNING ON / OFF PROJECTOR
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
LENS SHIFT ADJUSTMENT
KEYSTONE ADJUSTMENT
PICTURE FREEZE FUNCTION
NO SHOW FUNCTION
P-TIMER FUNCTION
SOUND ADJUSTMENT
15
PICTURE IMAGE ADJUSTMENTS
23
23
23
25
25
26
28
28
29
30
30
31
32
32
33
34
34
15
15
16
17
18
18
18
19
20
20
21
21
21
21
21
22
22
22
22
SETTING
SETTING MENU
APPENDIX
OPERATING WIRELESS MOUSE
MAINTENANCE
WARNING TEMP. INDICATOR
AIR FILTER CARE AND CLEANING
CLEANING PROJECTION LENS
LAMP REPLACEMENT
LAMP REPLACE COUNTER
TROUBLESHOOTING
INDICATORS AND PROJECTOR CONDITION
COMPATIBLE COMPUTER SPECIFICATION
MENU TREE
TECHNICAL SPECIFICATIONS
CONFIGURATIONS OF TERMINALS
OPTIONAL PARTS
LENS REPLACEMENT
37
37
41
41
42
42
43
43
44
45
46
48
49
50
52
53
54
54
TRADEMARKS
● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
● Windows and PowerPoint are registered trademarks of Microsoft Corporation.
● Each name of corporations or products in the user's guide is a trademark or a registered trademark of its
respective corporation.
5
FEATURES AND DESIGN
This Multimedia Projector is designed with advanced technology for portability, durability, and ease of use. This projector
utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
◆
Compact Design
This projector is extremely compact in size and weight.
It is designed to be portable and work anywhere you
need it.
◆
Compatibility
This projector accepts various video and computer input
signals including;
● Computers
IBM-compatible or Macintosh computer up to 1280
x 1024 resolution.
● 6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PALN color system can be displayed.
● Component Video
Component video signals, such as a DVD player
output, including high definition TV signals (480i,
480p, 575i, 575p, 720p, 1035i or 1080i) can be
displayed.
● S-Video
S-Video signals, such as an S-VHS VCR output
signal, can be displayed.
◆
High Resolution Image
This projector provides 1024 x 768 dots resolution for
computer input and 800 horizontal TV lines. Resolution
from a computer between XGA (1024 x 768) and SXGA
(1280 x 1024) is compressed into 1024 x 768 dots. This
projector cannot display image of over 1280 x 1024 dots.
When the resolution of your computer is more than 1280
x 1024, lower the resolution.
◆
Multi-Scan System
This projector has a Multi-Scan System to conform to
almost all computer output signals quickly. There is no
need for troublesome manual adjustment of frequency
and other settings.
◆
One-Touch Auto PC Adjustment
Incoming computer video signals are recognized and
automatically adjusted for by the Auto PC Adjustment
feature. No complicated setup is necessary and
projection is always precise.
◆
Motor-driven Lens Shift
The Projection lens can be moved up and down with the
motor-driven lens shift function. This function makes it
easy to place the image where you want it.
Zoom and focus are also motor-driven functions.
6
◆
Digital Zoom (for Computer)
The Digital Zoom function adjusts image size to approx.
1/4 ~ 49 times original size, allowing you to focus on
crucial information in your presentation.
◆
Keystone Correction
Certain projector positions can cause the image to be
distorted into a trapezoid shape. Keystone Correction
solves this problem by digitally altering the image to
make it square.
◆
Power Management
The Power Management function is provided to reduce
power consumption while the projector is not in use.
The Power Management function turns the Projection
Lamp off when the projector has no signal input and no
buttons are pressed. The Projection Lamp is
automatically turned on again when the projector detects
a signal or any operation button is pressed.
This projector is shipped with this function ON.
◆
Digital Visual Interface
The projector is equipped with DVI 24-pin terminal for
connecting DVI output from a computer or other DVI
source.
◆
Laser Pointer Function
The Remote Control supplied with the projector includes
a Laser Pointer.
◆
Wireless Mouse
The Remote Control supplied with this projector has
Wireless Mouse function for a connected computer. This
function enables you to operate both projector and
computer with the Remote Control.
◆
Multilanguage Menu Display
Operation menu is displayed in; English, German,
French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean or Japanese.
PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT OF CABINET
TOP CONTROLS
AND INDICATORS
PROJECTION LENS
AIR INTAKE
VENT
LENS COVER
BACK OF CABINET
EXHAUST VENT
SPEAKERS
POWER CORD
CONNECTOR
INFRARED
REMOTE RECEIVER
TERMINALS
AND CONNECTORS
INFRARED
REMOTE RECEIVER
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
● Do not put flammable objects near this vent.
● Do not place anything within 3.3’(1 m) of this
vent, especially heat-sensitive objects.
● Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
The projector monitors internal temperature
and automatically adjusts cooling fan LAMP COVER
speed.
CARRYING
HANDLE
BOTTOM OF CABINET
AIR INTAKE VENTS
The projector is equipped with cooling fans to prevent overheating.
Pay attention to the following precautions to ensure proper
ventilation and avoid possible risk of fire and malfunction.
● Do not cover vent slots.
● Keep side clear of any objects. Obstructions may block cooling
air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7
PREPARATION
SETTING-UP PROJECTOR
CONNECTING AC POWER CORD
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects correct input voltage. It
is designed to work with single-phase power systems having a
grounded neutral conductor. To reduce risk of electrical shock, do
not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of type of power supply being in use.
Connect a projector with a peripheral equipment before turning a
projector on. (Refer to pages 12 ~ 14 for connection.)
CAUTION
For safety, unplug AC Power Cord when the appliance is not in
use.
When the projector is turned off, but still connected to input
power, the projector is in Stand-by Mode and still consumes a
small amount of electricity.
Connect AC Power Cord (supplied) to projector.
AC outlet must be near this equipment and must
be easily accessible.
NOTE ON POWER CORD
The AC Power Cord must meet the requirements of the country where you use a projector.
Confirm the AC plug type with the chart below and use the proper AC power cord.
If supplied AC Power Cord does not match AC outlet, contact your sales dealer.
AC Outlet side
Projector side
For U.S.A. and Canada
For Continental Europe
Ground
To POWER CORD
CONNECTOR on a
projector.
8
To AC Outlet.
(120 V AC)
To AC Outlet.
(200 - 240 V AC)
PREPARATION
POSITIONING PROJECTOR
● This projector is designed to project on a flat
projection surface.
● Projector can be focused from 4.6’ (1.4m) ~ 48.3’
(14.7m).
● Refer to figure below to determine screen size.
ROOM LIGHT
Brightness in room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide best
image.
48.3’(14.7m)
36.1’(11.0m)
24.0’(7.3m)
308”
200”
100”
40”
400”
300”
11.8’(3.6m)
4.6’(1.4m)
Max. Zoom
231” Min. Zoom
154”
77”
31”
Screen
Size
Max. Zoom
40”
100”
150”
200”
250”
300”
400”
(Diag.)
Min. Zoom
31”
77”
115”
154”
192”
231”
308”
4.6’ (1.4m)
11.8’ (3.6m)
17.7’ (5.4m)
24.0’ (7.3m)
30.2’ (9.2m)
36.1’ (11.0m)
48.3’ (14.7m)
Distance
LENS SHIFT ADJUSTMENT
The Projection lens can be moved up and down using the motor-driven lens shift function. This function makes it
easy to position the image where you want. U/D ratio can be adjusted 10 : 0 ~ 1 : 1 (refer to figure below).
Refer to P21 for operation.
Highest (10 : 0)
Lowest (1 : 1)
1
10 : 0
1
9
PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted using
the ADJUSTABLE FEET. The projection angle can be
adjusted up to 10.5 degrees.
1
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.
2
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET. Rotate the ADJUSTABLE FEET to
fine tune the position and or tilt.
3
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull the FEET LOCK LATCHES.
Image position and keystone distortion can be adjusted
using the projector menus. (Refer to P 21 and 37.)
ADJUSTABLE FEET
FEET LOCK
LATCHES
PROPER PROJECTOR INSTALLATION
Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard.
10˚
Do not tilt the projector more than 10 degrees.
10˚
Do not point the projector up.
NO UPWARD
Do not point the projector down.
NO DOWNWARD
Do not put the projector on either side.
NO SIDEWAYS
10
PREPARATION
MOVING PROJECTOR
Use the Carry Handle when moving the Projector.
When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the lens
and projector case.
When the projector is not in use for an extended period,
put it in the case (dust cover) supplied with the projector.
CAUTION WHILE CARRYING OR TRANSPORTING THE PROJECTOR
● Do not drop or bump the projector, otherwise damage or malfunctions may result.
● When carrying the projector, use a suitable carrying case.
● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the projector through a courier or transport service,
consult your dealer for instructions.
11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on the rear panel for connecting computers and video equipment.
Refer to the figures on pages 12 to 14 for connection details.
COMPUTER AUDIO
INPUT 1/AUDIO MONITOR
OUTPUT JACK
This connection is switchable
and can be used as an audio
input for computer 1 or an
audio output (variable).
Configure this connection
using the projector menu.
(Refer to P13, P23 for more
details.)
COMPUTER INPUT/MONITOR
OUTPUT TERMINAL (ANALOG)
COMPUTER AUDIO
INPUT 2 JACK
COMPUTER INPUT
TERMINAL (DIGITAL)
This connection is switchable and
can be used as computer input or
monitor output. Configure this
connection using the projector
menu (Refer to P13, P23 for more
details.)
Note: The monitor loop-through
shows only the 5 wire computer
input from the Input 2 BNC jacks.
Connect a Digital DVI-D
output to this connection.
(Refer to P13 for more details)
Note: The MP-45t is HDCP
compliant for HD DVI inputs.
Connect the audio output
(stereo) from the computer
or DVI source to this jack.
(Refer to P13 for more
details.)
R/C JACK
INPUT 1
DIGITAL(DVI-D)
ANALOG IN/OUT
R/C JACK
USB CONNECTOR (Series B)
To control computer mouse
functions with the projector
Remote Control, connect the
USB terminal of the computer to
this connection.
(Refer to P13 for more details.)
AUDIO 1
IN/OUT
CONTROL PORT
RESET
USB
AUDIO 2
CONTROL PORT CONNECTOR
G
B
R
VIDEO/Y
Cb/Pb
H/V
V
Cr/Pr
INPUT 2
RESET BUTTON
This projector uses a microprocessor
occasionally, the microprocessor may
need to be reset. To reset the
microprocessor, press the RESET
button with a pen. The projector will
shut down and restart. If this needs to
be done too often, contact your dealer,
the projector may need service.
5 BNC INPUT JACKS
Connect component video
output (Y, Cb, Cr or Y, Pb, Pr)
from video equipment to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks or connect computer
output {5 BNC Type (Green,
Blue, Red, Horiz. Sync and
Vert. Sync.)} from computer
to G, B, R, H/V and V jacks.
(Refer to P13 and 14.)
12
Use the supplied cable to
connect the Remote Control
directly to the projector. This
will allow the Remote Control
to operate over longer
distances
and
through
interference.
VIDEO/Y Cb/Pb
Cr/Pr
R–AUDIO–L
(MONO)
S–VIDEO
To control computer mouse
functions with the Remote
Control connect the computer
mouse port to this connection.
(Refer to P13 for more
details.)
INPUT 3
VIDEO INPUT JACKS
AUDIO INPUT JACKS
S-VIDEO INPUT JACK
Connect composite video
output from video equipment
to VIDEO/Y jack or connect
component video outputs to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks. (Refer to P14.)
Connect an audio output
from video equipment to
these jacks.
(Refer to P14.)
Connect S-VIDEO
output from video
equipment to this
jack. (Refer to P14.)
CONNECTING PROJECTOR
CONNECTING TO COMPUTER
Cables used for connection
(✽ = Cable or adapter is not supplied with this projector.)
• VGA Cable (HDB 15 pin)
• Control Cable for PS2 Port ✽, or ADB Port ✽
• USB Cable
• DVI-Digital Cable (for Single Link T.M.D.S.) ✽
• BNC Cable ✽
• MAC Adapter (When connecting to Macintosh computer) ✽
• Control Cable for Serial Port
• Audio Cables (Mini Plug (stereo) x 2) ✽
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
Desktop type
Monitor Output
Monitor Output
or
Monitor Input
Monitor Output
MAC Adapter ✽
Set slide switches
according to chart
below.
BNC
Cable ✽
USB port
USB
Cable
DVI
Cable ✽
Laptop type
Audio Output
Audio
Cable ✽
(stereo)
ADB port
Serial port
PS/2 port
Control Cable
for Serial Port
Control Cable
for PS/2 Port ✽
Control Cable
for ADB Port ✽
Terminal
Terminal
Terminal
VGA Cable
COMPUTER
AUDIO IN 1 or 2
Use one of these Control
Cables corresponding with
terminal of your computer.
USB
COMPUTER IN ANALOG
COMPUTER IN DIGITAL
CONTROL
PORT
INPUT 1
DIGITAL(DVI-D)
ANALOG IN/OUT
NOTE;
R/C JACK
NOTE;
CONTROL PORT
RESET
USB
AUDIO 1
IN/OUT
AUDIO 2
AUDIO OUT
This terminal is switchable.
Set the terminal up as
either Computer input or
Monitor output before
using this terminal.
(See page 23.)
G
B
R
VIDEO/Y
Cb/Pb
H/V
V
This terminal is switchable.
Set the terminal up as either
Computer audio input 1 or audio
monitor output (variable) before using
this terminal. (See page 23.)
Cr/Pr
INPUT 2
VIDEO/Y Cb/Pb
Cr/Pr
S–VIDEO
R–AUDIO–L
Audio Cable
(stereo) ✽
(MONO)
Projector
Connections
INPUT 3
◆ MAC ADAPTER ✽
Set switches as shown in table
below depending on RESOLUTION MODE that you want to
use before you turn on projector and computer.
1
ON
13" MODE (640 x 480)
16" MODE (832 x 624) OFF
19" MODE (1024 x 768) OFF
21" MODE (1152 x 870) ON
2
ON
ON
ON
ON
NOTE :
When connecting cables, power cords
of both the projector and external
equipment should be disconnected
from AC outlet. Turn the projector and
peripheral equipment on before
computer is switched on.
Audio Input
ON
ON
External Audio Equipment
DIP
1 2 3 4 5 6
OFF
3
4
5
6
Audio Amplifier
Audio Speaker
(stereo)
OFF OFF OFF OFF
OFF ON OFF OFF
ON OFF OFF OFF
ON ON OFF OFF
13
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
Cables used for connection
(✽ = Cable is not supplied with this projector.)
• Video Cable (RCA x 1 or RCA x 3) ✽
• BNC Cable ✽
• S-VIDEO Cable ✽
• Audio Cable (RCA x 2) ✽
• Audio Cable {Mini Plug (stereo)} ✽
• Scart Cable ✽
Video Source (example)
Video Cassette Recorder
Component video output equipment.
(such as DVD player or high-definition TV source.)
Video Disc Player
Composite Component Video Composite Component Video Audio Output
RGB Scart
Output
21-pin Output Video Output
Output
Video Output
(Y, Cb/Pb, Cr/Pr)
(Y, Cb/Pb, Cr/Pr)
Video Cables
(RCA x 1 or
RCA x 3) ✽
Scart Cable ✽
S-VIDEO
Output
Audio Cable
(RCA x 2) ✽
S-VIDEO
Cable ✽
BNC Cable ✽
VIDEO
Y - Cb/Pb - Cr/Pr VIDEO
Y - Cb/Pb - Cr/Pr
COMPUTER IN ANALOG
AUDIO IN
INPUT 1
DIGITAL(DVI-D)
ANALOG IN/OUT
R/C JACK
AUDIO OUT
AUDIO 1
IN/OUT
CONTROL PORT
RESET
USB
AUDIO 2
G
B
R
VIDEO/Y
Cb/Pb
H/V
V
Cr/Pr
INPUT 2
VIDEO/Y Cb/Pb
Audio Cable
(stereo) ✽
S–VIDEO
(MONO)
This terminal is switchable.
Set the terminal up as either
Computer audio input 1 or audio
monitor output (variable) before
using this terminal.
(See page 23.)
External Audio Equipment
Audio Amplifier
14
R–AUDIO–L
INPUT 3
NOTE;
Audio Input
Cr/Pr
Audio Speaker
(stereo)
Projector
Connections
NOTE :
When connecting cables, the power cords
of the projector and external equipment
should be disconnected from AC outlet.
S-VIDEO
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
LASER POINTER (Drag ON)
INDICATOR
Left Side
POWER ON-OFF BUTTON
ON
Lights red while laser beam
is emitted from Laser Light
Window.
Lights green when drag
feature is active. (P41)
AUTO PC ON-OFF
D.ZOOM FREEZE NO SHOW
LOCK
ALL OFF
MUTE BUTTON
Used to mute sound. (P22)
DRAG ON/OFF BUTTON
ALL-OFF SWITCH
When using Remote Control, turn
this switch to “ON.” And turn it to
“ALL OFF” when it is not used.
MUTE
IMAGE
VOLUME- SELECT VOLUME+
KEYSTONE
MENU
Used to set drag feature
ON/OFF. (P41)
Used to turn projector on or
off. (P20)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P25)
IMAGE BUTTON
Used to select image
level. (P28, 32)
KEYSTONE BUTTON
Used to correct keystone
distortion. (P21, 37)
LEFT CLICK BUTTON
Used as a PC mouse in
INSIDE THE BATTERY
Wireless Mouse Operation.
Press this button and the
COMPARTMENT
The remote control has DIP switches in mouse pointer button to drag
the battery compartment to control the a selected screen object.
(P41)
laser pointer and code features.
Setting SW4 (LASER ON/OFF switch)
LASER BUTTON
to "OFF" disables the laser pointer on
Used to operate Laser Pointer
the remote.
Set switches 1-3 as shown in the table Function. Laser beam is
below to select the remote control emitted while pressing this
button within 1 minute.
code.
When using this Laser Pointer
(Refer to P39.)
for more than 1 minute,
release LASER button and
press it again.
DIP SWITCH SETTING
MOUSE POINTER
Used as a PC mouse in
Wireless Mouse Operation.
(P41)
LASER
P-TIMER
RIGHT CLICK BUTTON
INPUT 1
ZOOM COLOR.M INPUT 2
INPUT 3
FOCUS LENS
Used as a PC mouse in
Wireless Mouse Operation.
(P41)
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P21)
SW4 ........ LASER ON/OFF
WIRED REMOTE JACK
1
2
ON
3
4
SW1 SW2 SW3 Code No.
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Code 1
Code 2
Code 3
Code 4
Code 5
Code 6
Code 7
Code 8
FOCUS BUTTON
When using as Wired
Remote Control, connect
Remote Control Cable to
this jack.
Battery installation is
required when using as
Wired Remote Control.
Used to adjust focus. (P21)
LASER POINTER FUNCTION
This Remote Control emits a laser beam as a laser pointer function from the Laser Light Window. When LASER button is
pressed, laser light goes on. And when LASER button is pressed for more than 1 minute or LASER button is released, light
goes off. LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser beam is being
emitted.
Laser emitted is a class II laser; therefore, do not look into Laser Light Window or shine laser beam on yourself or other
people. Below are the caution labels for the laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
These caution labels are on the remote control.
LASER POINTER INDICATOR
Laser Light Window
15
BEFORE OPERATION
NO SHOW BUTTON
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P29)
AUTO PC ON-OFF
D.ZOOM FREEZE NO SHOW
SELECT BUTTON
LOCK
Used to execute the
selected item, or to
expand or compress
image in DIGITAL ZOOM
+/- mode. (P29)
Used to turn picture into
black image. (P22)
MUTE
IMAGE
VOLUME- SELECT VOLUME+
KEYSTONE
MENU
FREEZE BUTTON
Used to freeze picture. (P22)
MENU BUTTON
INPUT 1 BUTTON
P-TIMER BUTTON
LASER
Used to operate PTIMER function. (P22)
P-TIMER
INPUT 1
ZOOM COLOR.M INPUT 2
ZOOM BUTTON
INPUT 3
Used to adjust zoom. (P21)
FOCUS LENS
Point the Remote Control toward
the projector Receiver Window
when using the remote control.
Maximum operating range for the
Remote Control is about 16.4’ (5m)
and 60° in front and rear of the
projector.
POINT (VOLUME +/-)
BUTTONS
Used to select an item or
adjust value in ON-SCREEN
MENU. They are also used
to pan image in DIGITAL
ZOOM +/- mode. (P29)
POINT LEFT/RIGHT buttons
are also used as VOLUME
+/- buttons. (P22)
Used to select MENU
operation. (P18, 19)
Operating Range
60°
16.4’
(5 m)
Used to select input
source (INPUT 1).
(P23)
INPUT 2 BUTTON
Used to select input
source (INPUT 2).
(P24, 30)
INPUT 3 BUTTON
16.4’
(5 m)
Used to select input
source (INPUT 3).
(P30)
COLOR MANAGEMENT
BUTTON
60°
Used to operate COLOR
MANAGEMENT.
(P34)
Remote Control Batteries Installation
1
Remove battery
compartment lid.
Press lid downward and slide it.
2
Slide batteries into
compartment.
3
Replace compartment lid.
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
To ensure safe operation, please observe following precautions :
● Use (2) AA, UM3 or R06 type alkaline batteries.
● Replace both batteries at the same time.
● Do not mix new batteries with used batteries.
● Avoid contact with water or liquid.
● Do not expose the Remote Control to moisture, or heat.
● Do not drop the Remote Control.
● If a battery has leaked in the Remote Control, carefully wipe case clean and install new batteries.
● Danger of explosion if batteries are incorrectly installed.
● Dispose of used batteries according to the battery manufacturer's instructions and local rules.
16
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on the top panel.
LAMP REPLACE INDICATOR
WARNING TEMP. INDICATOR
READY INDICATOR
LAMP INDICATOR
Turns to yellow when
life of projection lamp
draws to an end. (P44)
Flashes red when
internal
projector
temperature is too
high. (P42)
Lights green when the
projector is ready to be
turned on. It flashes
green
in
Power
Management mode.
(P39)
Becomes dim when the
lamp is lit, and bright
when the projector is in
stand-by mode.
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P20)
MENU BUTTON
Used to open or close
MENU operation. (P18,
19)
INPUT BUTTON
Used to select input
source. (P23, 24, 30)
ZOOM BUTTON
Used to adjust zoom.
(P21)
FOCUS BUTTON
Used to adjust focus.
(P21)
AUTO PC ADJ. BUTTON
LENS SHIFT BUTTON
Used to operate AUTO PC
Adjustment function. (P25)
Used to select LENS
SHIFT function. (P21)
IMAGE BUTTON
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to pan image in
DIGITAL ZOOM +/– mode. (P29)
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
SELECT BUTTON
Used to select image
level. (P28, 32)
Used to execute the
selected item.
It is also used to
expand/compress image
in DIGITAL ZOOM mode.
(P29)
17
BEFORE OPERATION
OPERATING ON-SCREEN MENU
HOW TO OPERATE ON-SCREEN MENU
REMOTE CONTROL
You can control and adjust this projector through the ON-SCREEN
MENU. Refer to the following pages to operate each adjustment
on the ON-SCREEN MENU.
AUTO PC ON-OFF
1 DISPLAY MENU
Press MENU button to display the ON-SCREEN MENU.
✽ The Pointer is the icon on the ON-SCREEN MENU used to
select an item. See figures in "FLOW OF ON-SCREEN MENU
OPERATION" section below.
LOCK
2 MOVING POINTER
Move pointer (✽ see below) or adjust value of item by pressing
POINT on Top Control or the Remote Control.
POINT BUTTONS
D.ZOOM FREEZE NO SHOW
MUTE
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
IMAGE
VOLUME- SELECT VOLUME+
KEYSTONE
MENU
SELECT BUTTON
MENU BUTTON
Used to select the item.
3 SELECT ITEM
Select an item or set the selected function by pressing SELECT.
TOP CONTROL
MENU BUTTON
POINT BUTTONS
Used to move Pointer
UP/ DOWN/ RIGHT/
LEFT.
LASER
P-TIMER COMPUTER 1
ZOOM
COMPUTER 2
SELECT BUTTON
Used to select item.
VIDEO
FOCUS LENS
FLOW OF ON-SCREEN MENU OPERATION
Display ON-SCREEN MENU
1
Press MENU to display the ON-SCREEN MENU (MENU
BAR). The red frame is the POINTER.
Select Menu to be adjusted
2
MENU ICON
MENU BAR
Move the POINTER (red frame) to the MENU ICON that you
want to select by pressing the POINT RIGHT / LEFT.
POINTER (red frame)
Press POINT UP/DOWN to
move POINTER.
POINTER
(red frame)
ITEM
Control or adjust item through ON-SCREEN MENU
3
Press POINT UP/DOWN and move the POINTER (red frame
or red arrow) to the ITEM that you want to adjust, and then
press SELECT to show ITEM DATA.
4
Adjust ITEM DATA by pressing POINT RIGHT / LEFT.
Refer to the following pages for details of respective
adjustments.
SELECT
BUTTON
ITEM DATA
Press POINT LEFT/RIGHT to
adjust value or set function.
18
BEFORE OPERATION
MENU BAR
FOR PC SOURCE
Press MENU while connected to a PC input source.
IMAGE SELECT MENU
GUIDE WINDOW
PC SYSTEM MENU
Shows selected
item of ONSCREEN MENU.
Used to select
computer system.
(Refer to P23, 24)
Used to select
image level from
Standard, Real
and Image 1 ~ 4.
(Refer to P28)
SCREEN MENU
SETTING MENU
Used to adjust size
of image. [Normal
/ True / Wide /
Digital zoom +/–]
(Refer to P29)
Used to change
settings of projector
or reset Lamp
Replace Counter.
(Refer to P37-40)
INPUT MENU
PC ADJUST MENU
IMAGE ADJUST MENU
SOUND MENU
Used to select
input source (Input
1, Input 2 or Input
3). (Refer to P23)
Used to adjust
parameters to
match with input
signal format.
(Refer to P25-27)
Used to adjust computer
image.
[Contrast/Brightness/Color
/Tint/Color management
/Auto picture control
/Color temp.
/White balance (R/G/B)
/Sharpness/Gamma/Noise
reduction/Progressive]
(Refer to P34-36)
Used to adjust
volume or mute
sound.
(Refer to P22)
FOR VIDEO SOURCE
Press MENU while connected to a VIDEO input source.
INPUT MENU
IMAGE SELECT MENU
Used to select
input source
(Input 1, Input 2
or Input 3).
(Refer to P30)
Used to select image
level from Standard,
Cinema and Image 1
~ 4.
(Refer to P32)
Same function as
Menu for PC source.
AV SYSTEM MENU
Used to select
system of selected
video source.
(Refer to P31)
SCREEN MENU
Used to set size of
image to Normal
or Wide.
(Refer to P33)
IMAGE ADJUST MENU
Used to adjust picture image.
[Contrast/Brightness/Color/Tint
/Color management
/Auto picture control/Color temp.
/White balance (R/G/B)
/Sharpness/Gamma
/Noise reduction/Progressive]
Same function as
Menu for PC source.
(Refer to P34-36)
19
BASIC OPERATION
TURNING ON / OFF PROJECTOR
TURNING ON PROJECTOR
1
Complete peripheral connections (with Computer, VCR, etc.)
before turning on projector. (Refer to "CONNECTING TO
PROJECTOR" on pages 12~14 for connecting that equipment.)
2
Connect the projector's AC Power Cord into an AC outlet. LAMP
Indicator lights RED, and READY Indicator lights GREEN.
Current Input and
Lamp mode status
NOTE : When the “On start” function is ON, the projector turns
on automatically when the AC Power Cord is connected
to an AC outlet. (Refer to page 39.)
3
Press POWER ON-OFF on Top Control or on Remote Control.
The LAMP Indicator dims, and the Cooling Fans start to operate.
The Start Display appears on the screen and a count-down
starts. The signal from the PC or Video source appears after 30
seconds.
The currently selected Input and the Lamp mode status are also
displayed on screen for 5 seconds. (Refer to "LAMP MODE" on
page 37.)
30
Start Display disappears after 30 seconds.
TURNING OFF PROJECTOR
1
Press POWER ON-OFF on Top Control or on Remote Control,
and a "Power off?" message appears on the screen.
2
Press POWER ON-OFF again to turn off projector. The LAMP
Indicator lights bright and the READY Indicator turns off. After
projector is turned off, Cooling Fans operate (for 90 seconds).
During this "Cooling Down" period, projector cannot be turned
on.
3
Message disappears after 4 seconds.
When the projector has cooled down, the READY Indicator lights
GREEN again and you can turn projector on or disconnect the
AC Power Cord.
TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
When the “Power Management” function is enabled, the projector detects signal interruption and turns off the Projection
Lamp automatically. Refer to “Power management” on page 39.
When the WARNING TEMP. Indicator is flashing, the projector cannot be turned on, refer to the section "MAINTENANCE" on
page 42. When both the WARNING TEMP. and READY Indicators are flashing, refer to the section "MAINTENANCE" on page
42.
Do not use the projector continuously for 24 hours or more. If using the projector continuously for long periods,
turn it off and leave it for one hour at least once during a 24 hour period.
If you use the projector continuously for long period, it can greatly shorten the life of the lamp.
20
BASIC OPERATION
ADJUSTING SCREEN
ZOOM ADJUSTMENT
1
Press ZOOM on Top Control or ZOOM ▲/▼ on Remote Control.
“Zoom” message is displayed.
2
Press ZOOM ▲ or POINT UP to make image larger, and press
ZOOM ▼ or POINT DOWN to make image smaller.
Message disappears after 4 seconds.
FOCUS ADJUSTMENT
1
Press FOCUS on Top Control or FOCUS ▲/▼ on Remote
Control. “Focus” message is displayed.
2
Adjust focus of image by pressing FOCUS ▲/▼ or POINT
UP/DOWN.
Message disappears after 4 seconds.
LENS SHIFT ADJUSTMENT
1
Press LENS SHIFT on Top Control or LENS SHIFT ▲/▼ on
Remote Control. “Lens shift” message is displayed.
2
Press POINT UP or LENS SHIFT ▲ to move image up, press
POINT DOWN or LENS SHIFT ▼ to move image down.
KEYSTONE ADJUSTMENT
If the projected image has keystone distortion, correct it with the KEYSTONE adjustment.
1
Press KEYSTONE on Remote Control or select Keystone on
SETTING menu. (Refer to page 37.) Keystone dialog box
appears.
2
Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT. Press POINT UP to reduce the upper
part of the image, and press POINT DOWN to reduce the lower
part. Press POINT LEFT to reduce the left part, and press
POINT RIGHT to reduce the right part.
Reduce the upper width
with POINT UP.
Reduce the lower width
with POINT DOWN.
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum
correction.
• If you press the KEYSTONE on Top Control or
on Remote Control once more while the
keystone dialog box is being displayed, the
keystone adjustment will be canceled.
Reduce the left part with
POINT LEFT.
Reduce the right part with
POINT RIGHT.
21
BASIC OPERATION
PICTURE FREEZE FUNCTION
Press FREEZE on Remote Control to freeze picture on-screen. To cancel FREEZE function, press FREEZE again or press
any other button.
NO SHOW FUNCTION
Press NO SHOW on Remote Control to black out image. To restore to
normal, press NO SHOW again or press any other button.
Message disappears after 4 seconds.
P-TIMER FUNCTION
Press P-TIMER on Remote Control. Timer display “00:00” appears on
screen and timer starts to count time (00:00 ~ 59:59).
To stop P-TIMER display, press P-TIMER. Press P-TIMER again to
cancel P-TIMER function.
SOUND ADJUSTMENT
Indicates roughly level of
volume.
DIRECT OPERATION
Volume
Press VOLUME (+/–) on Top Control or on Remote Control to adjust
volume. Volume dialog box appears on screen for a few seconds.
(+) button to increase volume, and (–) button for decrease.
Mute
Press MUTE to set Mute function On or Off.
Press MUTE on Remote Control to cut off sound. To restore sound to
its previous level, press MUTE again or press Volume (+/–).
Display disappears after 4 seconds.
MENU OPERATION
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to SOUND.
2
Press POINT UP/DOWN to move the red frame pointer to the
item that you want to select, and then press SELECT.
SOUND MENU
Indicates roughly
level of volume.
Volume
To increase volume, press POINT RIGHT, press POINT LEFT to
decrease.
Built-in SP.
Press POINT LEFT/RIGHT to switch built-in speaker on and off.
Mute
Press POINT LEFT/RIGHT to cut off sound. Dialog box display is
changed to “On” and sound is cut off. To restore sound to its previous
level, press POINT LEFT/RIGHT again.
22
Close SOUND Menu.
SOUND Menu icon
COMPUTER INPUT
SELECTING INPUT SOURCE
INPUT button
DIRECT OPERATION
✽
Select INPUT source by pressing INPUT on Top Control.
Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 on
Remote Control.
If the projector cannot reproduce proper image, manually select the
correct input source using the On Screen MENU (see below).
Input 1
Input 2
Input 3
NOTE
● Input 1 terminal is switchable and can be used as computer input or
monitor output.
✽
Input 1 is not displayed when the Input 1 is used as
Monitor out.
MENU OPERATION
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to INPUT Menu.
INPUT Menu icon
2
Press POINT UP/DOWN and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT.
SELECTING COMPUTER SYSTEM
SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to INPUT.
2
Press POINT UP/DOWN to move the red arrow pointer to Input
1 and then press SELECT. Source Select Menu will appear.
3
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow)
to Input 1 and press SELECT.
Move the pointer to the source that you want to select and then
press SELECT.
Input 1
RGB(Analog)
When your computer is connected to INPUT 1 (ANALOG)
terminal, select RGB(Analog).
Source Select Menu
Move the pointer to source
and press SELECT.
RGB(Scart)
When video equipment is connected to INPUT 1 (ANALOG)
terminal, select RGB(Scart).
RGB(PC Digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB(PC Digital).
RGB(AV HDCP)
If a HDCP-compatible signal source is connected to the INPUT 1
(DIGITAL) terminal, select RGB(AV HDCP).
Monitor out
NOTE;
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting digital
entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied.
The specification of HDCP is decided and
controlled by Digital Content Protection, LLC.
Should the specification be changed, this
projector may not display the digital content
protected by HDCP.
If the INPUT 1 ANALOG terminal is being used as a MONITOR
OUT terminal, select Monitor out.
23
COMPUTER INPUT
SELECTING INPUT 2 (5 BNC INPUT JACKS )
Connecting a computer output [5 BNC Type (Green, Blue, Red, Horiz.
Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks.
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to INPUT.
2
Press POINT UP/DOWN to move the red arrow pointer to Input
2 and then press SELECT. Source Select Menu will appear.
3
Press POINT UP/DOWN and a red-arrow icon will appear.
Move arrow to "RGB", and then press SELECT.
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow)
to Input 2 and press
SELECT.
Input 2
Source Select Menu
Move the pointer to RGB
and press SELECT.
AUTOMATIC MULTI-SCAN SYSTEM
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to
“COMPATIBLE COMPUTER SPECIFICATION” on page 49). When a computer input is selected, the projector automatically
tunes to the incoming signal and projects the proper image without any special setting. (Some computers need to be set
manually.)
The projector displays either Auto, -----, Mode 1/2/3/4/5, or the system provided by the projector.
Auto
––––
Mode 1
When the projector cannot recognize the PC signal as a
system programmed into this projector, the Auto PC
Adjustment function attempts to adjust the projector and
the message “Auto” is displayed on the SYSTEM Menu
icon.
If the image is not displayed properly, manual adjustment
is required. (Refer to P26 and 27.)
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being
selected.
There is no signal input from computer. Make sure the
computer and projector are connected and configured
correctly. (Refer to TROUBLESHOOTING on page 46.)
User preset adjustment in MANUAL PC ADJUSTMENT.
Adjustment data can be stored in the Mode 1-5.
SVGA 1 Computer systems provided in the projector. The
projector chooses proper system and displays it.
✽ Mode 1 and SVGA 1 are examples.
SELECT COMPUTER SYSTEM MANUALLY
This projector automatically selects PC system among those provided
in this projector. The PC system can be also selected manually.
24
1
Press MENU and the ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT to move the red frame pointer to PC
SYSTEM.
2
Press POINT UP/DOWN to move the red arrow pointer to the
system that you want to set, and then press SELECT.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P26, 27)
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your
computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adj.
1
Press MENU and the ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT to move the red frame pointer to PC
ADJUST.
2
Press POINT UP/DOWN to move the red frame pointer to AUTO
PC Adj. icon and then press SELECT.
This Auto PC Adjustment can be also executed by pressing
AUTO PC ADJ. on Top Control or on Remote Control.
PC ADJUST MENU
PC ADJUST Menu icon
Move the red frame pointer to
AUTO PC Adj. icon and press
SELECT.
Store adjustment parameters.
Adjustment parameters from Auto PC Adjustment can be memorized
in the projector. Once the parameters are memorized, they can be
recalled just by selecting the Mode in the PC SYSTEM Menu (P24).
Refer to step 3 of MANUAL PC ADJUSTMENT section (P27).
NOTE
● Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with the Auto PC Adjustment
function. When the image is not displayed properly through this function, manual adjustments are required. (Refer to page
26, 27.)
● The Auto PC Adjustment function cannot be selected for Digital Signal inputs on the DVI terminal or if “480p”, “575p”,
“480i”, “575i”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on the PC SYSTEM Menu.
25
COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune to display signals from most personal computers currently distributed. However, some
computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system
of this projector. If this happens, the projector cannot reproduce a proper image, the image may be flickering, nonsynchronized, non-centered or skewed.
This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match those special
signal formats. This projector has 5 independent memory areas to store the manually adjusted parameters. This enables you
to recall the settings for a specific computer whenever you use it.
Note : The PC ADJUST Menu cannot be operated when DVI is selected on PC SYSTEM MENU (P24).
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to PC ADJUST.
2
Press POINT UP/DOWN to move the red frame pointer to the
item that you want to adjust and then press SELECT.
Adjustment dialog box will appear. Press POINT LEFT/RIGHT to
adjust value.
PC ADJUST MENU
PC ADJUST Menu icon
Move the red frame icon to item
and press SELECT.
Fine sync
Adjusts the image as necessary to eliminate flicker from display.
Press POINT LEFT/RIGHT to adjust value. (From 0 to 31.)
Total dots
Adjusts the number of total dots in one horizontal period. Press
POINT LEFT/RIGHT and adjust number to match your PC output.
Selected Mode
Shows status
(Stored / Free) of
selected Mode.
Horizontal
Adjusts horizontal picture position. Press POINT LEFT/RIGHT to
adjust position.
Vertical
Adjusts vertical picture position. Press POINT LEFT/RIGHT to adjust
position.
Press POINT LEFT/RIGHT
to adjust value.
Press SELECT at this icon to adjust
“Clamp,” “Display area (H/V)” or set
“Full screen.”
Current mode
Press SELECT to show information of computer selected.
Clamp
Current mode
Adjusts clamp position. When image has a dark bar(s), try this
adjustment.
Press SELECT at Current
mode icon to show
information of computer
connected.
Press SELECT at this icon to display previous items.
26
COMPUTER INPUT
Press SELECT at Display
area icon and Display area
dialog box appears.
Display area
Selects area displayed with this projector. Select resolution at
Display area dialog box.
Display area
Display area H
Adjustment of horizontal area displayed by the projector. Press
POINT LEFT/RIGHT to decrease/increase value and then press
SELECT.
Display area V
Adjustment of vertical area displayed by the projector. Press POINT
LEFT/RIGHT to decrease/increase value and then press SELECT.
Full screen
Press POINT LEFT/RIGHT to switch Full screen function to “On” or
“Off.” Set “On” to resize image with 4 x 3 aspect ratio to fit screen.
This function cannot be adjusted when “ON” is selected on
Anamorphic function (P38).
Press POINT LEFT
/RIGHT to adjust value
and
then
press
SELECT.
To store adjustment data.
This Mode has parameters being stored.
NOTE : Fine sync, Display area, Display area H, Display area V and
Full screen cannot be adjusted when “480p”, “575p”, “480i”,
“575i”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is
selected on PC SYSTEM Menu (P24).
3
Store
To store adjustment parameters, move the red frame pointer to
Store icon and then press SELECT. Move the red arrow pointer
to any of Mode 1 to 5 that you want to store and then press
SELECT.
Mode free
To clear adjustment parameters previously set, move the red
frame pointer to Mode free icon and then SELECT. Move the red
arrow pointer to the Mode that you want to clear and then press
SELECT.
Other icons operates as follows.
Store icon
Vacant Mode Shows values of “Total dots,”
“Horizontal,” “Vertical,” “Display
area H,” and “Display area V.”
To clear adjustment data.
Reset
Reset all adjust parameters on adjustment dialog box to previous
values.
Quit
Closes PC ADJUST MENU.
Mode free icon
Close this dialog box.
27
COMPUTER INPUT
PICTURE IMAGE SELECT
IMAGE LEVEL SELECT (DIRECT)
Select image level from Standard, Real, Image 1, Image 2, Image 3
and Image 4 by pressing IMAGE on Top Control or on Remote
Control.
IMAGE button
Standard
Real
Standard
Normal picture level preset on this projector.
Image 1
Real
Picture level with improved halftone for graphics.
Image 2
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P36).
Image 3
Image 4
IMAGE LEVEL SELECT (MENU)
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to IMAGE SELECT.
2
Press POINT UP/DOWN to move the red frame pointer to the
level that you want to set and then press SELECT.
IMAGE SELECT MENU
IMAGE SELECT
Menu icon
Standard
Normal picture level preset on this projector.
Move a red frame icon to level and
press SELECT.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P36).
28
Level being selected.
COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to choose how the projector displays computer
images.
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to SCREEN.
2
Press POINT UP/DOWN and move the red frame pointer to the
function that you want to select and then press SELECT.
SCREEN MENU
SCREEN Menu icon
Move red frame to function and press
SELECT.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When original image size is larger
than screen size (1024 x 768), this projector enters “Digital zoom +”
mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message “D. Zoom +” is displayed. Press SELECT to expand
image size. And press POINT UP/DOWN/LEFT/RIGHT to pan
image. Panning function can work only when image is larger than
screen size.
The projected image can also be expanded by pressing D.ZOOM ▲
on Remote Control.
NOTE
● True and Digital zoom +/– cannot be operated
when “480i”, “575i”, “480p”, “575p”, “1035i (HDTV)”
or “1080i (HDTV)” is selected on PC SYSTEM
Menu (P24).
● Wide cannot be selected when “720p (HDTV)”,
“1035i (HDTV)” or “1080i (HDTV)” is selected on
PC SYSTEM Menu (P24).
● This projector cannot display any resolution higher
than 1280 X 1024. If your computer’s screen
resolution is higher than 1280 X 1024, reset
resolution to lower before connecting projector.
● Image data in other than XGA (1024 x 768) is
modified to fit screen size in initial mode.
● Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
Digital Zoom –
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message “D. Zoom –” is displayed. Press SELECT to compress
image size.
The projected image can also be compressed by pressing D.ZOOM
▼ on Remote Control.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
▲/▼, SELECT, POINT and LASER.
29
VIDEO INPUT
SELECTING INPUT SOURCE
SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting to a video source, select the input source in
SOURCE SELECT Menu.
1
INPUT MENU
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to INPUT.
2
Press POINT UP/DOWN to move the red arrow pointer to Input
2 and then press SELECT. Source Select Menu will appear.
3
Move pointer to the source that you want to select and then
press SELECT.
INPUT Menu icon
Move pointer (red arrow) to
Input 2 and press SELECT.
Input 2
Video
Source Select Menu
Move pointer to Video or
Y, Pb/Cb, Pr/Cr and press
SELECT.
When video input signal is connected to VIDEO jack,
select Video.
Y,Pb/Cb,Pr/Cr
When video input signal is connected to Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
SELECTING INPUT 3 (AV TERMINALS )
When connecting to a video source, select the input source in
SOURCE SELECT (VIDEO) Menu.
1
INPUT MENU
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to INPUT.
INPUT Menu icon
Move pointer (red arrow) to
Input 3 and press SELECT.
2
Press POINT UP/DOWN to move the red arrow pointer to Input
3 and then press SELECT. Source Select Menu will appear.
Input 3
Source Select Menu (VIDEO)
3
Move pointer to the source that you want to select and then
press SELECT.
Video
When video input signal is connected to VIDEO jack,
select Video.
Y,Pb/Cb,Pr/Cr
S-Video
30
When video input signal is connected to Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When video input signal is connected to S-VIDEO jack,
select S-Video.
Move pointer to source and
press SELECT.
VIDEO INPUT
SELECTING VIDEO SYSTEM
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to AV SYSTEM.
2
Press POINT UP/DOWN to move the red arrow pointer to the
system that you want to select and then press SELECT.
VIDEO JACK OR S-VIDEO JACK
Auto
Projector automatically detects incoming Video system, and adjusts
itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format from PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM Menu icon
This box indicates system
being selected.
Move pointer to system
and press SELECT.
Y, Pb/Cb, Pr/Cr JACKS
Auto
Projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
When Video System is 1035i or 1080i, select system manually.
COMPONENT VIDEO SIGNAL FORMAT
If projector cannot reproduce proper video image, it is necessary to
select a specific component video signal format from 480i, 575i, 480p,
575p, 720p, 1035i and 1080i.
AV SYSTEM MENU (COMPONENT VIDEO)
AV SYSTEM Menu icon
This box indicates system
being selected.
Move pointer to system and
press SELECT.
31
VIDEO INPUT
PICTURE IMAGE SELECT
IMAGE LEVEL SELECT (DIRECT)
Select image level from Standard, Cinema, Image 1, Image 2, Image 3
and Image 4 by pressing IMAGE on Top Control or on Remote
Control.
IMAGE button
Standard
Cinema
Standard
Normal picture level preset on this projector.
Image 1
Cinema
Picture level adjusted for picture with fine tone.
Image 2
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P36).
Image 3
Image 4
IMAGE LEVEL SELECT (MENU)
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to IMAGE SELECT.
2
Press POINT UP/DOWN to move the red frame pointer to the
level that you want to set and then press SELECT.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for picture with fine tone.
IMAGE 1~4
User preset picture adjustment in IMAGE ADJUST Menu (P36).
32
IMAGE SELECT MENU
IMAGE SELECT
Menu icon
Move red frame pointer to level
and press SELECT.
Level being selected.
VIDEO INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to control how the projector resizes the video image.
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to SCREEN.
2
Press POINT UP/DOWN and move the red frame pointer to the
function that you want to select and then press SELECT.
Normal
Provides image at a normal video aspect ratio of 4 : 3.
Wide
SCREEN MENU
SCREEN Menu icon
Move red frame to function and press
SELECT.
NOTE : SCREEN Menu cannot be operated when
“720p,” “1035i,” or “1080i” is selected on AV
SYSTEM Menu (P31).
Provides image at a wide screen ratio of 16 : 9.
33
PICTURE IMAGE
PICTURE IMAGE ADJUSTMENTS
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to IMAGE ADJUST.
2
Press POINT UP/DOWN to move the red frame pointer to the
item that you want to adjust and then press SELECT. Adjust
levels by pressing POINT LEFT/RIGHT.
IMAGE ADJUST MENU
IMAGE ADJUST
Menu icon
Move red frame pointer to
item to be selected and then
press SELECT.
Contrast
Press POINT LEFT to decrease contrast, and POINT RIGHT to
increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT to adjust image darker, and POINT RIGHT to
adjust brighter. (From 0 to 63.)
Color
Press POINT LEFT to lighten color, and POINT RIGHT to deeper
color. (From 0 to 63.)
Tint
Press POINT LEFT or POINT RIGHT to obtain proper color. (From 0
to 63.)
Press POINT LEFT/RIGHT to
adjust value.
Color Management
The Color management function can be used to adjust the level,
phase and gamma of the selected display colors on the screen, and
to replace these colors with other colors if required.
The projector lets you replace up to eight colors for each image.
There are four preset images for VIDEO mode and four preset
images for PC, giving a total of eight images.
1
2
3
34
Press the POINT UP/DOWN to move the red frame pointer to
"COLOR MANAGEMENT", and then press the SELECT. The
COLOR MANAGEMENT menu will appear and pointer mode will
be enabled. The image that was being projected when the button
was pressed will be paused, and the COLOR MANAGEMENT
POINTER will appear.
POINTER MODE
COLOR
MANAGEMENT
POINTER
Use the POINT to move the pointer to a section of the paused
image that contains the color that you would like to adjust, and
then press the SELECT. The mode will change to COLOR
SELECTION mode, and the color in the center of the pointer will
be selected and adjustment will be possible.
NOTE;
Use the POINT to adjust the level and phase of the color, and
then press the SELECT to confirm the setting.
Next, use the POINT to adjust the gamma correction for the
color, and then press the SELECT to accept the setting. When
the SELECT is pressed, the mode will change to LIST mode.
Press the COLOR M. on the remote control to
display the COLOR MANAGEMENT menu.
If you would like to check or re-adjust a color
management setting that has already been made,
press the COLOR M. on the remote control once
more to change to LIST mode.
PICTURE IMAGE
4
Move the red frame pointer to "MENU", and then press the
SELECT. The message "OK"? is displayed. Move the pointer to
[Yes] and then press SELECT. The COLOR MANAGEMENT
menu will be exited and the display will return to the IMAGE
ADJUST menu. (At this time, the image will stop being paused
and normal projection will resume.) After changing the COLOR
MANAGEMENT settings, use the IMAGE ADJUST menu to
store the changed settings.
COLOR SELECTION
MODE
Level and phase
adjustment palette.
Gamma
adjustment palette.
COLOR SELECTION MODE
CANCEL
The mode will return to the pointer mode (even if you press the
MENU key on the projector or the remote control). (You will need to
reselect and re-adjust the color in this case.)
QUIT
The COLOR MANAGEMENT menu will be exited and the display will
return to the normal projection screen, but any settings that have
been changed will not be stored. To store the changed settings, be
sure to select "LIST" using the POINT buttons and change to the
next mode (LIST mode).
LIST
LIST MODE
CANCEL
QUIT
COLOR PALETTE
DEL
LIST MODE
Clearing the check box temporarily disables the specific color management effect on that line, allowing you to compare the image without the
effect
COLOR PALETTE
Returns to COLOR SELECTION mode so that you can re-adjust the
setting for the color in that line. This option is not available if the
check mark has been cleared by the operation immediately above.
DEL
The setting adjustment for the color in that line will be deleted.
ALL DEL
The setting adjustment for the colors in all lines will be deleted.
COLOR M.
The mode will return to POINTER mode.
ALL DEL
MENU
COLOR M.
NOTE;
If you press the COLOR M. on the remote control,
the COLOR MANAGEMENT menu will be exited
and the display will return to the normal projection
screen, but any settings that have been changed
will not be stored. To store the changed settings,
be sure to select "MENU" using the POINT buttons
and store the settings.
Auto picture control
Press either POINT LEFT or POINT RIGHT to Auto picture control
position that you want to select. (Off, L1 or L2)
Off ······· Auto picture control OFF position.
L1 ········ Auto picture control LEVEL 1 position.
L2 ········ Auto picture control LEVEL 2 position.
35
PICTURE IMAGE
Color temp.
Press either POINT LEFT or POINT RIGHT to Color temp. level that
you want to select. (XLow, Low, Mid or High)
White balance (Red)
Press POINT LEFT to lighten red tone and POINT RIGHT to deeper
tone. (From 0 to 63.)
White balance (Green)
Press POINT LEFT to lighten green tone and POINT RIGHT to
deeper tone. (From 0 to 63.)
Press SELECT at this icon to display other items.
White balance (Blue)
Press POINT LEFT to lighten blue tone and POINT RIGHT to deeper
tone. (From 0 to 63.)
Sharpness
Press POINT LEFT to soften the image, and POINT RIGHT to
sharpen the image. (From 0 to 31.)
Press SELECT at this icon to display previous items.
Gamma
Press either POINT LEFT or POINT RIGHT to obtain better balance
of contrast. (From 0 to 15.)
Noise reduction
Press POINT LEFT/RIGHT to
adjust value.
Press POINT LEFT/RIGHT to change noise reduction mode. Dialog
box display is changed to “On” to reduce noise (rough parts) of
image. Press POINT LEFT/RIGHT again, to change noise reduction
mode to off.
Progressive scan
Press POINT LEFT/RIGHT to change progressive scan mode.
Dialog box display is changed to “Off”, “L1”, “L2”.
Off ··· Progressive scan mode to OFF.
L1 ···· Progressive scan mode to ON (for active picture).
L2 ···· Progressive scan mode to ON (for still picture).
Store
To store manually preset image, move the red frame pointer to Store
and press SELECT. Image Level Menu will appear. Move red frame
pointer to Image 1 to 4 where you want to set and then press
SELECT.
Other icons operates as follows.
Reset
Reset all adjustment to previous values.
Quit
Closes IMAGE MENU.
36
Image Level Menu
Move a red frame pointer to
any of Image 1 to 4 where you
want to set and then press
SELECT.
Store icon
Press SELECT at this icon to
store the adjustment.
NOTE :
Tint cannot be adjusted when the video system is
PAL, SECAM, PAL-M or PAL-N.
Progressive cannot be operated when “480p”, “575p”
or “720p” is selected on AV SYSTEM MENU (P31).
SETTING
SETTING MENU
1
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red-frame pointer to SETTING.
2
Press POINT DOWN to move the red-frame pointer to the item
that you want to set and then press SELECT. Setting dialog box
appears.
Language
SETTING MENU
SETTING Menu icon
Set red frame pointer
to item and press
SELECT.
Language used in ON-SCREEN MENU is selectable from English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean and Japanese.
Lamp mode
Lamp Mode allows you to reduce the brightness of the lamp and the
power consumption of the projector.
When pressing SELECT at
Language, Language
Menu appears.
Normal mode
Auto mode
The brightness is adjusted automatically to a
level that is suitable for the screen.
Eco mode
The brightness is reduced to 80% of Normal
mode.
Keystone
When the image is distorted, select Keystone. ON-SCREEN MENU
disappears and Keystone dialog box is displayed.
Store ··· Saves the keystone adjustment settings when the
projector is shut off.
Reset ··· Resets the keystone adjustment settings to "0" when the
projector is shut off.
When SELECT is pressed, the mode changes to keystone
adjustment mode. Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT. Refer to KEYSTONE ADJUSTMENT on
page 21.
Aspect V
Aspect H
Move pointer to item and
then press POINT
LEFT/RIGHT.
These adjust the vertical and horizontal scale and position of the
screen. Use the POINT RIGHT/LEFT to select Store or Reset.
Store ··· Saves the adjustment settings when the projector is shut
off.
Reset ··· Resets the adjustment settings when the projector is shut
off.
When SELECT is pressed, the mode changes to Scale or Position
adjustment mode. Use the POINT LEFT/RIGHT to select whether you
wish to adjust Scale or Position, and then use the POINT UP/DOWN
to adjust the values.
NOTE :
Adjusting the Keystone settings clears the Aspect H/V settings.
To maintain the Aspect H/V adjustment settings, adjust the keystone
first, then adjust the Aspect H/V.
37
SETTING
Anamorphic
When this function is “On,” the screen image is forcibly changed to a
4:3 image, even if the input signal is HDTV.
Blue back
When this function is “On,” and the projector is not receiving any
input a blank, blue screen will be displayed instead of video noise.
Display
This function decides whether to display On-Screen Displays.
On ··· shows all the On-Screen Displays.
Off ···· no On-Screen Displays will show except;
● ON-SCREEN MENU
● “Power off?” message
● P-TIMER
● “No signal” message
● “Wait a moment” message
Menu position
This function is used to adjust the on-screen menu display position.
When SELECT is pressed, the adjustment screen is displayed
(arrows appear). Use the POINT UP/DOWN/LEFT/RIGHT to adjust
the position. After making the adjustment, press SELECT to return to
the Menu screen.
Logo
When this function is “On,” projector displays logo when starting up.
Ceiling
When this function is “On,” picture is top/bottom and left/right
reversed. This function is used when the projector is mounted upside
down e.g. hanging from a ceiling mount.
Press SELECT at this icon to
display other items.
Ceiling function
Rear
When this function is “On,” picture is left/right reversed. This function
is used to project the image onto a rear projection screen.
Rear function
38
Press SELECT at this icon to
display previous items.
SETTING
Power management
This projector is equipped with a power management function. When the input signal is interrupted and no buttons are
pressed for 30 seconds or more, the power management function turns off the lamp to reduce power consumption and
conserve lamp operating time. The factory default settings for power management are "Ready" and "5 Min".
OPERATION
1) If the input signal is interrupted and no buttons are pressed for 30 seconds or more, the message "No signal" and a countdown timer appears on the screen.
If "Ready" is selected
2) When the count-down is complete, the lamp shuts off and
the fans continue to run to cool off the lamp. The READY
indicator is off during cool-down, and the projector cannot
be operated.
3) When the cool-down is complete, the READY indicator
starts flashing to notify the operator that power
management mode is active. In this condition, the
projector will turn on automatically if it detects an input or
if the projector is operated.
When SELECT is pressed, the
adjustment screen is displayed.
If "Shut down" is selected
Use the POINT LEFT/RIGHT to select
the power management function mode
("Off", "Ready" or "Shut down").
2) When the count-down is complete, the lamp shuts off and
the fans continue to run to cool off the lamp. The READY
indicator is off during cool-down, and the projector cannot
be operated.
3) When the cool-down is complete, the projector shuts
down and will not come on automatically.
Use the POINT DOWN to move the
pointer to the time setting, and then
use the POINT LEFT/RIGHT to set the
time (1 minute to 30 minutes).
If "Off" is selected
The power management function is canceled.
Time left until Lamp off.
On start
When this function is “On,” the projector will automatically turn on
when power is applied.
Note ; Be sure to turn projector off properly (refer to section
“TURNING OFF PROJECTOR” on P20). If projector is turned
off in wrong steps, On Start function does not operate
properly.
Remote control
This projector has eight different remote control codes; the factoryset normal code (Code 1) and seven additional codes (Code 2 to
Code 8). This switching function allows several projectors in the
same area to be controlled via remote control without interfereing
with each other.
For example, if operating projector in “Code 7,” both projector and
Remote Control must be switched to “Code 7.”
To change the code of Projector;
To change the Remote control code of the projector use the ONSCREEN MENU to select from Code 1 to 8.
To change the code of the Remote Control;
To change the remote control code of the Remote Control, set the
DIP switches 1-3 inside the battery compartment box of the Remote
Control. (Refer to P15.)
When pressing SELECT at Remote
control, Remote control code Menu
appears.
39
SETTING
USB
This Projector is equipped with a USB port for either wireless mouse
operation or projector control. Set the mode using the steps below.
Wireless Mouse mode
Select "
this projector.
" when controlling a computer with Remote Control of
Projector mode
Select "
" when controlling a projector with computer.
NOTE: Projector Mode is for future use.
Key lock
This function locks the operation of the projector's control panel and
the remote control.
This locks operation of the projector's control panel.
This locks operation of the remote control.
This cancels the Key lock function.
If the projector's control panel accidentally becomes locked and you
do not have the remote control nearby, disconnect the AC cord to
turn off the power, and then while pressing the SELECT, reinsert the
AC cord, This will cancel the projector's control panel lock.
Lamp counter reset
This function is used to reset Lamp Replace Counter. When
replacing Projection Lamp, reset Lamp Replace Counter by using
this function. Refer to page 45 for operation.
Factory default
This function returns all setting values except for the lamp counter to
the factory default settings.
Press POINT UP/DOWN to move the red frame pointer to “Factory
default” and then press SELECT. The message "Return to Factory
default?" is displayed. Move the pointer to [Yes] and then press
SELECT.
Another confirmation dialog box appears select [Yes] and then press
SELECT.
40
APPENDIX
OPERATING WIRELESS MOUSE
The Wireless Remote Control not only operates the projector but can also function as a wireless mouse for most Personal
Computers. The POINT, drag ON/OFF and two CLICK are used for wireless mouse operation.
This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen.
INSTALLATION
To use Wireless Remote Control as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied)
is required. Make sure that the mouse driver is properly installed in your computer. And make sure that the mouse port (or
USB port) of a Personal Computer is activated.
1
Connect the mouse port (or USB port) of your computer to
Control Port (or USB connector) of this projector with Control
Cable (or USB cable). (Refer to page 12, 13 for connection.)
2
Turn the projector on first, and then turn on your computer.
When the computer is switched on first, Wireless Mouse may not
work properly.
Note : When your computer has no mouse
port, connect Serial Port of your
computer to Control Port of the
projector with Control Cable for Serial
Port (supplied).
OPERATING WIRELESS MOUSE
Use the POINT, Drag ON/OFF, LEFT CLICK and RIGHT CLICK on the Remote Control to control the mouse functions on
your computer.
AUTO PC ON-OFF
POINT button
Used to move PC mouse pointer. The pointer is moved
corresponding with the direction you are pressing.
DRAG ON
INDICATOR
LOCK
LEFT CLICK button
This button has the same function as the left button in a PC mouse.
Press this button and the POINT button to drag a selected screen
object.
RIGHT CLICK button
D.ZOOM FREEZE NO SHOW
MUTE
IMAGE
VOLUME- SELECT VOLUME+
KEYSTONE
MENU
This button has the same function as the right button in a PC mouse.
DRAG ON/OFF button
Use this button and the POINT to drag a selected screen object.
Press and release the Drag ON/OFF, DRAG ON INDICATOR lights
green and the remote control is in Drag mode. Use the POINT in the
direction that you want to drag the screen object. Press and release
the Drag ON/OFF again or press any other button, to drop the object
at the new screen location.
DRAG ON/OFF
button
POINT button
(Move the pointer)
LEFT CLICK button
(left button of the mouse)
LASER
RIGHT
CLICK button
(right button of the mouse)
P-TIMER COMPUTER 1
ZOOM
COMPUTER 2
VIDEO
FOCUS LENS
41
APPENDIX
MAINTENANCE
WARNING TEMP. INDICATOR
The Warning Temp. Indicator flashes red to let you know the internal temperature
of the projector exceeds the normal level. If the temperature goes up further, the
projector will be turned off automatically and the Ready indicator will go out. (The
Warning Temp. Indicator continues flashing.) After the cooling-off period, the
Ready Indicator lights again and the projector can be turned on by pressing the
On/Off button on the remote control or on the top control. When you turn on the
projector, the Warning Temp. Indicator will go out.
If the Warning Temp. Indicator is still flashing, check the following;
1
2
3
TOP CONTROL
Warning Temp.
Indicator
Ready
Indicator
Ventilation Slots of a projector may be blocked. In such an event, reposition
projector so that Ventilation Slots are not obstructed.
Air Filter may be clogged with dust particles. Clean Air Filter by following
section AIR FILTER CARE AND CLEANING on next page.
If WARNING TEMP. Indicator remains on after performing above checks,
Cooling Fans or Internal Circuits may be malfunctioning. Contact your dealer
or Boxlight Technical Support.
When both of the Warning Temp. and Ready indicators are flashing:
When the projector detects an internal problem, it will shut down automatically and both the Warning temp. and Ready
Indicators flash. In this condition, the projector cannot be turned on even if you press the On/Off on the remote control or on
the top control. If this case happenes, disconnect and reconnect the AC power cord, and then turn on the projector again to
check its operation. If the projector shuts down again or fails to turn on, the projector will need to be repaired. Disconnect the
AC power cord and contact your dealer or Boxlight Technical Support.
42
APPENDIX
AIR FILTER CARE AND CLEANING
The Air Filter prevents dust from accumulating on surface of Projection Lens and Projection Mirror. Should the Air Filter
become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and
adversely affect the life of the projector. Clean the Air Filter following steps below:
1
Turn off the projector, and disconnect the AC power cord.
2
Turn the projector upside down and remove the 2 Air Filters by
pulling latches upward.
3
4
Clean the Air Filters with a brush or wash out dust and particles.
Replace the Air Filters. Make sure that the Air Filters are fully
inserted.
CAUTION
Do not operate the projector with the Air Filters removed.
Dust may accumulate on the LCD Panels and Projection
Mirror degrading picture quality.
Do not put anything into the Air Intake Vents. It may result
in a projector malfunction.
AIR FILTER
Pull up and remove.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments
may cause poor image quality, reduced lamp life, and product malfunctions.
When using under dusty or smoky conditions, dust may accumulate on the lens, liquid crystal panels, or optical elements
inside the projector. This condition may degrade the quality of a projected image.
When above symptoms are noticed, contact a Boxlight Corporation at 1-800-762-5757 or 360-779-7901 for cleaning.
CLEANING PROJECTION LENS
Follow these steps to clean Projection Lens:
1
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.
2
3
Lightly wipe the cleaning cloth over the Projection Lens.
When the projector is not in use, replace the Lens Cover.
43
APPENDIX
LAMP REPLACEMENT
LAMP REPLACE
When the life of the Projection Lamp draws to an end, the LAMP
REPLACE indicator lights yellow. If this indicator lights yellow, replace
the projection lamp with a new one promptly.
TOP CONTROL
This indicator lights yellow
when the life of the projection
lamp draws to an end.
Replace the Projection Lamp
with a new one promptly.
CAUTION
Allow the projector to cool for at least 45 minutes before
you open the Lamp Cover. The inside of the projector
can become very hot.
For continued safety, replace with the lamp assembly of
the same type.
Do not drop the lamp assembly or touch the glass bulb!
The glass can shatter and may cause injury.
Follow these steps to replace the lamp assembly.
1
Turn off the projector and disconnect AC plug. Allow the
projector to cool for at least 45 minutes.
2
3
Loosen 2 screws with a screwdriver and open Lamp Cover.
4
Replace Lamp Assembly with a new one and tighten screws.
Make sure the Lamp Assembly is set properly. Replace Lamp
Cover and tighten screws.
5
6
Connect AC Power Cord to projector and turn it on.
Loosen 2 screws with a screwdriver and pull out Lamp Assembly
by grasping Handle.
LAMP COVER
LAMP
ASSEMBLY
HANDLE
Reset Lamp Replace Counter (refer to next page “Lamp Replace
Counter” section).
NOTE : Do not reset Lamp Replace Counter when Projection
Lamp is not replaced.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through Boxlight Corporation at 1-800-762-5757 or 360-779-7901.
When ordering Projection Lamp, give following information to dealer.
●
Model No. of your projector
● Replacement Lamp Type No.
:
:
BOXLIGHT MP-45t
POA-LMP67
(Service Parts No. 610 306 5977)
44
APPENDIX
LAMP REPLACE COUNTER
Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset,
the LAMP REPLACE Indicator stops lighting.
1
Turn projector on, press MENU and ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT to move the red frame
pointer to SETTING (refer to page 40).
2
Press POINT UP/DOWN to move the red frame pointer to
“Lamp counter reset” and then press SELECT. The
message "Lamp replace counter reset?" is displayed. Move
the pointer to [Yes] and then press SELECT.
3
Another confirmation dialog box appears and select [Yes] to
reset Lamp Replace Counter.
Move the pointer to Lamp counter reset and then press
SELECT. The message “Lamp replace counter reset?”
is displayed.
NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper
handling may result in accidents, injury, or create a fire hazard.
● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a
shorter period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR
lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous
use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who
are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
45
APPENDIX
TROUBLESHOOTING
Before calling your dealer or service center for assistance, check the following.
1. Make sure the projector is connected to your computer or video equipment as described in section "CONNECTING
PROJECTOR" on pages 12 ~ 14.
2. Check cable connections. Verify that all computer, video and power cords are properly connected.
3. Verify that all power is switched on.
4. If the projector still does not produce an image, re-start your computer.
5. If an image still does not appear, unplug the projector from your computer and check your computer monitor display.
Problem may be with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to
turn the computer and monitor off before you power up the projector. Power equipment back on in this order: Projector
then computer.)
6. If problem still exists, check following chart.
Problem:
No power.
Try these Solutions
● Plug the projector into your AC outlet.
● Make sure READY Indicator lights.
● Wait 90 seconds after the projector is turned OFF before turning a projector back on.
NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as
follows:
1. LAMP indicator lights bright and READY indicator turns off.
2. After 90 seconds, READY indicator lights green again and a projector may be
turned on by pressing Power ON-OFF button.
● Check WARNING TEMP. and READY indicator. If both WARNING TEMP. and READY
indicator are flashing, the projector cannot be turned on.
(See "TURNING ON/OFF PROJECTOR" section on page 20.)
● Check Projection Lamp. (Refer to page 44.)
Image is out of
focus.
● Adjust the focus.
● Make sure the projection screen is at least 4.6’ (1.4m) from the projector.
● Check Projection Lens to see if it needs cleaning.
NOTE : Moving a projector from a cool temperature location to a warm temperature location
may result in moisture condensation on Projection Lens. In such an event, leave
the projector OFF and wait until condensation disappears.
Picture is Left/Right
reversed.
● Check Ceiling/Rear feature. (See “SETTING” section on page 38.)
Picture is
Top/Bottom
reversed.
● Check Ceiling feature. (See “SETTING” section on page 38.)
Some displays are
not seen during
Operation.
● Check Display feature. (See “SETTING” section on page 38.)
No image.
● Check connection between your computer or video equipment and the projector.
● When turning the projector on, it takes about 30 seconds to display an image.
● Check that the selected system corresponds with your computer or video equipment.
● Make sure temperature is not out of Operating Temperature (5°C ~ 35°C).
No sound.
46
● Check audio cable connection from audio input source.
● Adjust audio source.
● Press VOLUME (+) button.
● Press MUTE button.
APPENDIX
Problem:
Try these Solutions
Remote Control
does not work.
●
●
●
●
Wireless Mouse
function does not
work.
● Check cable connection between the projector and your computer.
● Check mouse setting on your computer.
● Turn the projector on before turning on the computer.
Check batteries.
Check ALL-OFF switch on Remote Control is set to “ON”.
Make sure nothing is between Infrared Remote Receiver and Remote Control.
Make sure you are not too far from a projector when using Remote Control.
Maximum operating range is 16.4’ (5m).
● Check transmitted signal mode from Remote Control.
(See“SETTING” section on page 39.)
SERVICE
WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet.
Boxlight Service is easily obtained. If after following instructions above, you find that service is necessary, contact Boxlight for assistance at 1-800-762-5757 or 360-779-7901.
Give the model number and explain the difficulty. We will advise you how to obtain service.
Please have the following information available:
● Serial Number of Projector.
● Resolution of Computer.
● Refresh rate of Computer.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
47
APPENDIX
INDICATORS AND PROJECTOR CONDITION
Check the Indicators for projector condition.
Indicators
LAMP
REPLACE
yellow
WARNING
TEMP.
red
READY
LAMP
green
red
Projector Condition
The projector is OFF. (The AC Power Cord is unplugged.)
✽
The projector is READY to be turned on with the POWER ONOFF button.
✽
The projector is operating normally.
✽
The Warning Temp. Indicator flashes red to let you know the
internal temperature of the projector exceeds the normal level. If
the temperature goes up further, the projector will be turned off
automatically and the Ready indicator will go out. When the projector is cooled down enough and the temperature returns to normal, the READY indicator lights green and the projector can be
turned on. (The WARNING TEMP. indicator keeps flashing.)
Check and clean the Air Filter.
✽
The projector is cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
TEMP. indicator stops flashing. Check and clean the Air Filter.
✽
The projector is being cooled down. It cannot be turned on until
the READY indicator lights green.
✽
The projector has detected an abnormal condition and cannot be
turned on. Unplug the AC Power Cord and plug it again to turn
on the projector. If the projector is turned off again, disconnect
the AC Power Cord and contact the dealer or the service center
for service and checkup. Do not leave the projector on. It may
cause electric shock or a fire hazard.
✽
The projector is in the Power management mode.
• • • on
✽ When
• • • flashing
• • • dim
• • • off
the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow,
replace the projection lamp with a new one promptly. Reset the Lamp Replace Counter after replacement of the lamp.
48
APPENDIX
COMPATIBLE COMPUTER SPECIFICATIONS
Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less
than 180 MHz of Dot Clock.
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
(Progressive)
––––––––
(Progressive)
––––––––
(Interlace)
––––––––
(Interlace)
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
(Interlace)
H-Freq.
(kHz)
V-Freq.
(Hz)
ON-SCREEN
DISPLAY
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
30.00
25.00
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
43.59
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA15
MAC 19
MAC 21
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 21
MAC
MAC
720p (HDTV)
1035i (HDTV)
1080i (HDTV)
1080i (HDTV)
RESOLUTION
1024 x 768
1024 x 768
1024 x 768
(Interlace)
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
(Interlace)
1280 x 1024
(Interlace)
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
(Interlace)
1280 x 1024
1400 x 1050
1280 x 960
1280 x 1024
––––––––
(Progressive)
––––––––
(Interlace)
––––––––
(Interlace)
––––––––
(Interlace)
H-Freq.
(kHz)
V-Freq.
(Hz)
62.04
61.00
35.522
46.90
47.00
58.03
60.24
68.68
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
63.9
75.00
80.00
45.00
33.75
33.75
28.125
77.07
75.70
43.48
58.20
58.30
72.0
75.08
75.06
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
43.00
47.00
60.01
72.00
66.00
43.35
60.18
60.00
75.08
75.08
60.00
30.00
30.00
25.00
H-Freq.
(kHz)
V-Freq.
(Hz)
60.276
31.65
45.00
33.75
33.75
28.125
58.069
29.8
60.00
30.00
30.00
25.00
When a input signal is digital from DVI terminal, refer to chart below.
ON-SCREEN
DISPLAY
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-SXGA1
RESOLUTION
640 x 480
720 x 480
(Progressive)
768 x 575
(Progressive)
800 x 600
1024 x 768
1280 x 1024
H-Freq.
(kHz)
V-Freq.
(Hz)
ON-SCREEN
DISPLAY
31.47
31.47
31.25
37.879
43.363
63.98
59.94
59.94
50.00
60.32
60.00
60.02
D-SXGA2
D-SXGA3
D-720p
D-1035i
D-1080i
D-1080i
RESOLUTION
1280 x 1024
1280 x 1024
1280 x 720
(Progressive)
1920 x 1035
(Interlace)
1920 x 1080
(Interlace)
1920 x 1080
(Interlace)
NOTE : Specifications are subject to change without notice.
49
APPENDIX
MENU TREE
Input
Input
Input 1
SYSTEM
1)
RGB
RGB( Scart)
RGB(PC Digital)
SYSTEM
1)
SYSTEM
2)
RGB( AV HDCP )
Monitor out
Input 2
Input 3
Video
SYSTEM
3)
Y, Pb/Cb, Pr/Cr
SYSTEM
4)
RGB
SYSTEM
1)
Video
SYSTEM
3)
Y, Pb/Cb, Pr/Cr
SYSTEM
4)
S-Video
SYSTEM
3)
PC source
Screen
Video source
Normal
True
System
Wide
System
Mode 1
2)
1)
Digital zoom +
Mode 2
Digital zoom -
VGA 1
SVGA 1
XGA 1
PC adjust
System
Auto
3)
PAL
Auto PC Adj.
Fine sync
SECAM
0 - 31
NTSC
Total dots
NTSC 4.43
Horizontal
Image
PAL-M
Vertical
Standard
Current mode
Real
Clamp
Image 1
Display area
D-480p
PAL-N
640 x 480
System
Auto
4)
1080i
Image 2
720 x 400
Image 3
800 x 600
Image 4
720p
1024 x 768
575p
1152 x 864
480p
1280 x 1024
575i
1400 x 1050
480i
1035i
1600 x 1200
Quit
Image
Display area H
Display area V
Standard
Cinema
Full screen
On/Off
Image 1
Reset
Yes/No
Image 2
Mode free
Store
Image 3
Mode 1
Image 4
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Quit
50
Screen
Normal
Wide
APPENDIX
System
Setting
Language
English
Image adjust
Contrast
0 - 63
German
Brightness
0 - 63
French
Color
0 - 63
Italian
Tint
0 - 63
Spanish
Color management
0 - 63
Portuguese
Auto picture control
Off/L1/L2
Dutch
Color temp.
Swedish
Red
0 - 63
Russian
Green
0 - 63
Chinese
Blue
0 - 63
Korean
Sharpness
0 - 31
Japanese
Gamma
0 - 15
Quit
Noise reduction
On/Off
Lamp mode
Normal/Auto/Eco
Progressive
Off/L1/L2
Keystone
Store/Reset
Reset
Yes/No
Aspect V
Store/Reset
Store
Image 1
Aspect H
Store/Reset
Anamorphic
On/Off
Blue back
On/Off
Display
On/Off
Scale
XLow/Low/Mid/High
Position
Image 2
Scale
Image 3
Position
Image 4
Quit
Quit
Menu position
Logo
On/Off
Ceiling
On/Off
Rear
On/Off
Power management
Off/Ready/Shut down
On start
On/Off
Remote control code
Code 1
Code 2
Code 3
Code 4
Code 5
Code 6
Code 7
Code 8
Quit
USB
Mouse
Projector
Off
Key lock
Control panel
Remote control
Sound
Lamp counter reset
Yes/No
Factory default
Yes/No
Volume
0 - 63
Built-in SP.
On/Off
Mute
On/Off
Quit
51
APPENDIX
TECHNICAL SPECIFICATIONS
Projector Type
Dimensions (W x H x D)
Net Weight
LCD Panel System
Panel Resolution
Number of Pixels
Color System
High Definition TV Signal
Scanning Frequency
Projection Lens
Throw distance
Motorized Lens Shift
Multi-media Projector
12.6" x 6.6" x 18.5" (319 mm x 168 mm x 470 mm)
20.3 lbs (9.2 kg)
1.3" TFT Active Matrix type, 3 panels
1024 x 768 dots
2,359,296 (1024 x 768 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i and 1080i
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
F1.7 ~ 2.0 lens with f=48.2 mm ~ 62.6 mm Motor zoom and focus
4.6' (1.4 m) ~ 48.3' (14.7 m)
Up and Down
Projection Image Size (Diagonal)
Adjustable from 31" to 400"
Horizontal Resolution
Projection Lamp
Input 1/Monitor Output Jacks
800 TV lines (HDTV)
300 watt type
DVI Terminal (Digital) HDCP Compatible, HDB 15-pin Terminal (Analog)
and Stereo Mini Type Jack (Audio)
Input 2 Jacks
BNC Type x 5 (G or VIDEO/Y, B or Cb/Pb, R or Cr/Pr, H and V),
Stereo Mini Type Jack (Audio)
Input 3 Jacks
RCA Type x 3 (VIDEO/Y, Cb/Pb and Cr/Pr), RCA Type x 2 (Audio R and L)
and DIN 4-pin (S-Video)
Other Jacks
Built-in Speakers
Feet Adjustment
Voltage and
Power Consumption
Operating Temperature
Storage Temperature
Remote Control Transmitter
DIN 8-pin (Control port), USB port (Series B receptacle) and Wired Remote Jack
Accessories
INT. SP. Stereo (R and L), 2 watt RMS (T.H.D. 10%)
0˚ to 10.5˚
AC 100 ~ 120 V (5.0 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (2.5 A Max. Ampere), 50 / 60 Hz (Continental Europe)
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)
Power Source
Operating Range
Dimensions
Net Weight
Laser Pointer
:
:
:
:
:
AA, UM3 or R06 Type x 2
16.4’ (5m) / ±30˚
2.0” x 1.4” x 7.6” (50mm x 36mm x 193mm)
0.35 lbs (160 g) (including batteries)
Class II Laser (Max. Output : 1mW / Wave length : 650±20nm)
User’s Guide
AC Power Cord
Wireless/Wired Remote Control Transmitter and Batteries
Remote Control Cable
VGA Cable
USB Cable
Control Cable for Serial port
Protective Dust Cover
Lens Cover
● Specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a
tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
52
APPENDIX
CONFIGURATIONS OF TERMINALS
COMPUTER INPUT-1 and MONITOR OUT TERMINALS (ANALOG)
Terminal : HDB15-PIN
Pin Configuration
4
5
10
15
2
3
9
14
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red Input
Green Input
Blue Input
Sense 2
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
9
10
11
12
13
14
15
+5V Power
Ground (Vert.sync.)
Sense 0
DDC Data
Horiz. sync.
Vert. sync.
DDC Clock
COMPUTER INPUT-1 TERMINAL (DIGITAL)
Terminal : DVI 24-pin
Pin Configuration
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
No Connect
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
CONTROL PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Pin Configuration
8
5
7 6
4 3
2 1
1
2
3
4
5
6
7
8
PS/2
----CLK
DATA
GND
--------GND
-----
1
2
3
4
Vcc
- Data
+ Data
Ground
Serial
RXD
--------GND
RTS / CTS
TXD
GND
GND
ADB
----ADB
----GND
------------GND
USB CONNECTOR (Series B)
Pin Configuration
2
1
3
4
53
APPENDIX
OPTIONAL PARTS
The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer.
● Control Cable (PS2 Port)
Type No. : POA-MCPS2
● Control Cable (ADB Port)
Type No. : POA-MCMAC
● MAC Adapter
Type No. : POA-MACAP
● DVI Cable
Type No. : KA-DV20
● HDB 15 pin-SCART 21 pin Cable
Type No. : POA-CA-SCART
● Long Zoom Lens
Type No. : LNS-T31A
● Ultra Long Zoom Lens
Type No. : LNS-T32
● Short Zoom Lens
Type No. : LNS-W31A
● Short Fixed Lens
Type No. : LNS-W32
LENS REPLACEMENT
The lens of this projector can be replaced with other optional lens which are sold separately. This feature enables you to use
the projector for wide variety of uses.
For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced
by well-trained sales or service engineers. Do not attempt to do by yourself as it may cause injury.
To the sales and service engineer;
Referring to the attached lens replacement and installation manual, replace or install the lens properly.
After installing the lens, attach the lens cap to the lens when setting up the projector.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.
54
APPENDIX
55
LIMITED WARRANTY
BOXLIGHT CORPORATION ("BOXLIGHT") warrants that each Boxlight MP-45t ("the Product") sold hereunder will conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply only to
the first person or entity that purchases the Product for personal or business use and not for the purpose of distribution or
resale. Said warranty shall continue for a period of two (2) years from the date of such purchase. BOXLIGHT does not
warrant that the Product will meet the specific requirements of the first person or entity that purchases the Product for
personal or business use. Lamp is warrantied for 120 days or 500 hours (whichever comes first). Accessories are warrantied for 1 year from date of purchase.
BOXLIGHT CORPORATION's liability for the breach of the foregoing limited warranty is limited to the repair or replacement of the Product or refund of the purchase price of the Product, at BOXLIGHT's sole option. To exercise the
Purchaser's rights under the foregoing warranty, the Product must be returned at the Purchaser's sole cost and expense,
to BOXLIGHT or any authorized service center provided, however, that the Product must be accompanied by a written
letter explaining the problem and which includes (i) proof of purchase; (ii) the dealer's name; and (iii) the model and serial
number of the Product. A return authorization number, issued by the BOXLIGHT customer service department,
must also be clearly displayed on the outside of the shipping carton containing the Product.
WARRANTY LIMITATION AND EXCLUSION
BOXLIGHT CORPORATION shall have no further obligation under the foregoing limited warranty if the Product has been
damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress (unusual physical and electrical
stress includes unusually long operation, exposure to smoke and other airborne contaminants), unauthorized modification, tampering, alterations, or service other than by BOXLIGHT or its authorized agents, causes other than from ordinary
use or failure to properly use the Product in the application for which said Product is intended.
DISCLAIMER OR UNSTATED WARRANTIES
The warranty printed above is the only warranty applicable to this purchase.
All other warranties express or implied, including, but not limited to, the implied warranties or merchantability and fitness
for a particular purpose are disclaimed. There are no warranties that extend beyond the face hereof and the foregoing
warranty shall not be extended, altered or varied except by written instrument signed by BOXLIGHT CORPORATION.
LIMITATION OF LIABILITY
It is understood and agreed that BOXLIGHT's liability whether in contract, in tort, under any warranty, in negligence or
otherwise shall not exceed the return of the amount of the purchase price paid by purchaser and under no circumstances
shall BOXLIGHT be liable for special, indirect or consequential damages. The price stated for the Product is a consideration in limiting BOXLIGHT's liability. No action regardless of form, arising out of the agreement to purchase the product
may be brought by purchaser more than one year after the cause of action has accrued.
Boxlight
19332 Powder Hill Place
Poulsbo, WA 98370-7407 USA
www.boxlight.com
U.S. and Canada 800-762-5757
International 1-360-779-7901
Printed in Japan
Part No. 610 310 8308 (1AA6P1P4323-- MR3E)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising