Powermate to T-Ring Adapter Instructions

Powermate to T-Ring Adapter Instructions
POWERMATE TO T-RING ADAPTER INSTRUCTIONS
Overview
The Powermate T-Ring Adapters allow imaging through Powermate lens assemblies. The adapters are different for the 2x
and 4x and the same for the 2.5x and 5x models. However, the installation instructions are basically the same for all.
Steps
1. Unscrew black barrel of the 2x Powermate, or top half of black barrel of the 2.5x, 4x or 5x Powermate and set aside.
2. There is only one way for the Powermate T-Ring Adapter to fit on the Powermate lens assemblies: through an internal
thread on one side of the T-Ring Adapter. Slip this over the top of the Powermate lens assemblies and screw together tight.
3. Thread your camera’s T-Ring onto the T-Ring Adapter. Attach camera body.
or
4. Any couplings for CCD cameras with female T-threads can be threaded onto the T-Ring Adapter.
®
Tele
Vue
Vi s i o n a r y
32 Elkay Dr., Chester, New York 10918 (845) 469-4551 televue.com
POWERMATE TO T-RING ADAPTER INSTRUCTIONS
Overview
The Powermate T-Ring Adapters allow imaging through Powermate lens assemblies. The adapters are different for the 2x
and 4x and the same for the 2.5x and 5x models. However, the installation instructions are basically the same for all.
Steps
1. Unscrew black barrel of the 2x Powermate, or top half of black barrel of the 2.5x, 4x or 5x Powermate and set aside.
2. There is only one way for the Powermate T-Ring Adapter to fit on the Powermate lens assemblies: through an internal
thread on one side of the T-Ring Adapter. Slip this over the top of the Powermate lens assemblies and screw together tight.
3. Thread your camera’s T-Ring onto the T-Ring Adapter. Attach camera body.
or
4. Any couplings for CCD cameras with female T-threads can be threaded onto the T-Ring Adapter.
®
Tele
Vue
Vi s i o n a r y
32 Elkay Dr., Chester, New York 10918 (845) 469-4551 televue.com
POWERMATE TO T-RING ADAPTER INSTRUCTIONS
Overview
The Powermate T-Ring Adapters allow imaging through Powermate lens assemblies. The adapters are different for the 2x
and 4x and the same for the 2.5x and 5x models. However, the installation instructions are basically the same for all.
Steps
1. Unscrew black barrel of the 2x Powermate, or top half of black barrel of the 2.5x, 4x or 5x Powermate and set aside.
2. There is only one way for the Powermate T-Ring Adapter to fit on the Powermate lens assemblies: through an internal
thread on one side of the T-Ring Adapter. Slip this over the top of the Powermate lens assemblies and screw together tight.
3. Thread your camera’s T-Ring onto the T-Ring Adapter. Attach camera body.
or
4. Any couplings for CCD cameras with female T-threads can be threaded onto the T-Ring Adapter.
®
Tele
Vue
Vi s i o n a r y
32 Elkay Dr., Chester, New York 10918 (845) 469-4551 televue.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising