DirectDigital DAC Amplifier
NEDERLANDS
Owner’s Manual
SVENSKA
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
DirectDigital DAC Amplifier
ENGLISH
M32
РУССКИЙ
®
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO
DEUTSCH
NEDERLANDS
SVENSKA
1. Read instructions - All the safety and operating instructions should
be read before the product is operated.
2. Retain instructions - The safety and operating instructions should be
retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be
followed.
5.Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6.Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8.Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury
to a child or adult and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
9.
Cart - A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to overturn.
10.Ventilation - Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product and to protect it
from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been adhered to.
11.Power Sources - This product should be operated only from the type
of power source indicated on the marking label and connected to
a MAINS socket outlet with a protective earthing connection. If you
are not sure of the type of power supply to your home, consult your
product dealer or local power company.
12.Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
product.
13.Mains Plug - Where the mains plug or an appliance coupler is used
as the disconnect device, the disconnect device shall remain readily
operable.
14.Outdoor Antenna Grounding - If an outside antenna or cable system
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
РУССКИЙ
2
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Section 820-40
of the NEC which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
15.Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning
and power-line surges.
16.Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
17.Overloading - Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of fire or
electric shock.
18.Flame Sources - No naked flame sources, such as lighted candles,
should be placed on the product.
19.Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
20.Headphones - Excessive sound pressure form earphones and
headphones can cause hearing loss.
21.Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the product to its normal
operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance-this
indicates a need for service.
22.Replacement Parts - When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
23.Battery Disposal - When disposing of used batteries, please comply
with governmental regulations or environmental public instruction’s
rules that apply in your country or area.
24.Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
25.Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Changes or modifications to this equipment not expressly approved by
NAD Electronics for compliance could void the user’s authority to operate
this equipment.
WARNING
FRANÇAIS
CAUTION
To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
CAUTION
Marking and rating plate can be found at the rear panel of the apparatus.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
ESPAÑOL
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on apparatus.
Mains plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus from
the mains completely, the mains plug should be disconnected from the
mains socket outlet completely.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
ITALIANO
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
An appliance with a protective earth terminal should be connected to a
mains outlet with a protective earth connection.
IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN.
DEUTSCH
CAUTION REGARDING PLACEMENT
To maintain proper ventilation, be sure to leave a space around the unit
(from the largest outer dimensions including projections) than is equal to,
or greater than shown below.
Left and Right Panels: 10 cm
Rear Panel: 10 cm
Top Panel: 10 cm
This product is manufactured to comply with the radio
interference requirements of EEC DIRECTIVE 2004/108/EC.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
NEDERLANDS
NOTES ON ENVIRONMENTAL PROTECTION
At the end of its useful life, this product must not be disposed
of with regular household waste but must be returned to a
collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user’s manual and
packaging point this out.
The materials can be reused in accordance with their markings. Through
re-use, recycling of raw materials, or other forms of recycling of old
products, you are making an important contribution to the protection of
our environment.
Your local administrative office can advise you of the responsible waste
disposal point.
RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT)
The model and serial number of your new M32 are located on the back of
the cabinet. For your future convenience, we suggest that you record these
numbers here:
Model number : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial number :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . РУССКИЙ
SVENSKA
THE EQUIPMENT MUST BE CONNECTED TO AN EARTHED MAINS SOCKET-OUTLET.
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2016, NAD Electronics International, a division of Lenbrook Industries Limited
3
INTRODUCTION
TABLE OF CONTENTS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 2
FRANÇAIS
FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MDC CLASSIC UPGRADE SLOTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DD HDM-1 (DIRECT DIGITAL HDMI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DD AP 1 (DIRECT DIGITAL ANALOG-PHONO). . . . . . . . . . . . . . . . . . . . . . . . . 9
MDC BluOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
INTRODUCTION
GETTING STARTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
WHAT’S IN THE BOX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CHOOSING A LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RESTORING M32 TO ITS FACTORY DEFAULT SETTINGS. . . . . . . . . . . . . . . . 5
IDENTIFICATION OF CONTROLS
OPERATION
ESPAÑOL
USING THE M32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NAVIGATING THE M32 FEATURES AND MAKING CHANGES. . . . . . . . . . 10
DISPLAY MENU OPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MEDIA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EQ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SPEAKER SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SOURCE SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
OTHER FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DIGITAL OUTPUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CONTROL SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
LISTENING TO COMPUTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
BluOS MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
USING THE HTRM 2 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CONTROLLING THE M32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LEARNING CODES FROM OTHER REMOTES. . . . . . . . . . . . . . . . . . . . . . . . . . 17
PUNCH THROUGH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
COPY A COMMAND FROM ANOTHER KEY. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MACRO COMMANDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
KEY ILLUMINATION TIMEOUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
CONFIGURING KEY ILLUMINATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
FACTORY RESET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LOADING CODE-LIBRARIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SEARCH MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CHECKING CODE LIBRARY NUMBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SUMMARY OF THE HTRM 2 MODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
BATTERY INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ITALIANO
DEUTSCH
NEDERLANDS
SVENSKA
THANK YOU FOR CHOOSING NAD.
The M32 DirectDigital DAC Amplifier is an elegant, top-of-the-line, BluOS™
capable integrated amplifier with a host of features that offer maximum
flexibility, excellent efficiency, and reduced noise and distortion. Its
advanced software-controlled algorithms result in the shortest signal path
from source to speaker producing virtually no distortion and a damping
factor of over 1,000. This technology is among the fastest and most
accurate amplification and error correction available.
Using a proprietary modular design, you can upgrade or expand your M32
as technologies emerge, ensuring a cost-effective way to keep the music
“on” into the future.
As with all our products, NAD’s “Music First” design philosophy guided
the M32’s design. We have also been careful to ensure that the M32 is
as musically transparent, faithful to every detail and spatially accurate as
possible, incorporating much of what we’ve learned from more than a
quarter-century’s experience designing audio, video and home-theater
components.
We encourage you to take a few minutes now to read right through this
manual. Investing a little time here at the outset might save you a good
deal of time later, and is by far the best way to ensure that you make the
most of your investment in the M32.
РУССКИЙ
For warranty information contact your local distributor.
NAD SHALL NOT BE HELD LIABLE FOR ANY TECHNICAL OR USER INTERFACE DISCREPANCIES IN THIS MANUAL. THE M32 OWNER’S
MANUAL MAY BE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. CHECK OUT THE NAD WEBSITE FOR THE LATEST VERSION OF THE M32
OWNER’S MANUAL.
4
INTRODUCTION
RESTORING M32 TO ITS FACTORY DEFAULT SETTINGS
1 Press and hold front panel’s “Main” display.
SAVE THE PACKAGING
Please save the box and the packaging that came with the M32. Should
you move or need to transport your M32, this is the safest container to use.
We’ve seen too many otherwise perfect components damaged in transit
for lack of a proper shipping carton, so please: Save that box!
FRANÇAIS
WHAT’S IN THE BOX
Packed with your M32 you will find
• Two detachable mains power cord
• The HTRM 2 remote control with 4 AA batteries
• Four magnetic feet
• Cleaning cloth
• USB flash drive
• Quick Setup Guide
ENGLISH
GETTING STARTED
2 Select “Factory Reset” display option.
CHOOSING A LOCATION
ESPAÑOL
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and will provide a clear line of sight, within 25
feet / 8 meters, between the M32’s front panel and your primary listening/
viewing position - this will ensure reliable infrared remote control
communications. The M32 generates a modest amount of heat, but
nothing that should trouble adjacent components.
DEUTSCH
ITALIANO
3 Select “Yes” to reset your M32 to factory default settings or “No” if you
decide not to reset your M32.
4 Factory reset is complete when the M32 goes to standby mode.
РУССКИЙ
SVENSKA
NEDERLANDS
IMPORTANT NOTE
After factory reset, wait out for at least one minute to switch back the
M32 from standby mode to operating mode. This wait time can be
bypassed by turning OFF/ON the rear panel power switch and then
press Standby button.
5
IDENTIFICATION OF CONTROLS
FRONT PANEL
ENGLISH
2
FRANÇAIS
1
ESPAÑOL
© NAD M32
ITALIANO
3
4
1 POWER INDICATOR
• This indicator will be amber when the M32 is in standby mode.
• When the M32 is powered up from standby mode, this indicator
will change from amber to bright white color.
DEUTSCH
NEDERLANDS
2 o(STANDBY)
• Touch the o (Standby) button on top of the unit to switch the
M32 ON from standby mode. The Power indicator will change from
amber to bright/white color.
• Press and hold o (Standby) button until M32 switches back to
standby mode.
• One press or touch of the o (Standby) button will not switch the
M32 to standby mode. This is intended to avoid unintentionally
setting the M32 to standby mode if one happens to just touch or
press the o (Standby) button at operating mode.
• The Power indicator will change to amber color at standby mode.
• The o (Standby) button cannot activate the M32 if the rear panel
POWER switch is off.
• Refer also to +12V TRIGGER - REAR PANEL.
SVENSKA
IMPORTANT NOTES
For the o (Standby) button to activate, the following must occur:
a The supplied power cord from the M32 must be plugged in to a
power source.
b The rear panel POWER switch must be set to ON.
РУССКИЙ
3HEADPHONE
• A 1/4” stereo jack socket is supplied for headphone listening and will
work with conventional headphones of any impedance.
• The volume, tone and balance controls are operative for
headphone listening. Use a suitable adapter to connect
headphones with other types of sockets, such as 3.5mm “personal
stereo” jack plugs.
6
5
6
4 REMOTE SENSOR
• Point the HTRM 2 remote control at the remote sensor and press
the appropriate buttons.
• Do not expose the remote sensor of the M32 to a strong light
source such as direct sunlight or illumination. If you do so, you may
not be able to operate the M32 with the remote control.
Distance: About 23 ft. (7 m.) from the front of the remote sensor.
Angle: About 30 degrees in each direction of the front of the
remote sensor.
5 DISPLAY (TOUCH PANEL DISPLAY)
• Displays visual and menu information according to the settings
selected.
• The following display options are accessible via the touch panel
display - Main, Media, Mode, EQ and Setup.
• Touch the screen to select any of the display options, to see their
corresponding menu options, or settings.
6VOLUME
• The VOLUME control adjusts the overall loudness of the signal sent
to the loudspeakers. The Volume control is characterized by perfect
signal tracking and channel balance. It provides a highly linear and
low noise operation.
• Turn clockwise to increase the volume level and counter clockwise
to lower it.
• The default volume level is -20dB.
IDENTIFICATION OF CONTROLS
1
2
3
4
5
6
ENGLISH
REAR PANEL
7
OPT1
INPUT
PHONO
OPT2
L
OUTPUT
LINE 1
LINE 2
FRANÇAIS
COAX2
M o d u l a r
D e s i g n
C o n s t r u c t i o n
M o d u l a r
D e s i g n
C o n s t r u c t i o n
M o d u l a r
D e s i g n
C o n s t r u c t i o n
COAX1
PRE-OUT/SUBW
L
L
L
R
R
R
MM
SERVICE
COMPUTER
R
AES/EUB IN
© NAD M32
11
12
13
14
15
ESPAÑOL
10
ATTENTION!
Please ensure that the M32 is powered off or unplugged from the main power source before making any connections. It is also advisable to power down or
unplug all associated components while making or breaking any signal or AC power connections.
3 +12V TRIGGER
+12V TRIGGER OUT
The +12V TRIGGER OUT is used for controlling external equipment
equipped with a +12V trigger input.
• Connect this +12V TRIGGER OUT to the other equipment’s
corresponding +12V DC input jack using a mono cable with 3.5mm
male plug.
• This output will be 12V when the M32 is ON and 0V when it is either
OFF or in standby mode.
+12V TRIGGER IN
With this input triggered by a 12V DC supply, the M32 can be switched
ON remotely from Standby Mode by compatible devices such as
amplifiers, preamplifiers, receivers, etc. If the 12V DC supply is cut off,
the M32 will return to standby mode.
• Connect this +12V Trigger input to the remote device’s
corresponding +12V DC output jack using a mono cable with
3.5mm male plug. The controlling device must be equipped with a
+12V trigger output to use this feature.
4 IR IN
• This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the M32 from a remote location.
6SPEAKERS
• The M32 has two sets of SPEAKER connections which are identical
in function (parallel connection). They allow for bi-wiring.
• Connect M32’s Right speaker terminals marked “R +” and “R-” to
the corresponding “+” and “-“ terminals of your designated right
speaker. Repeat the same for M32’s Left speaker terminals and
corresponding left speaker.
• Double check the speaker connections before powering up the
M32.
NEDERLANDS
NOTE
Only digital sources can be streamed through COAXIAL/OPTICAL
DIGITAL OUT.
BI-WIRING
Most high quality loudspeakers offer the option of Bi-wiring. This
separates the High Frequency (HF) crossover from the Low Frequency
(LF) crossover. This offers enhanced performance by preventing LF
returned currents from affecting the HF performance. To bi-wire,
remove the “links” at the loudspeaker that connect the LF and HF
sections (these are provided for convenience when a single wire
connection is used).
SVENSKA
2 COAXIAL OUT, OPTICAL OUT,
• Connect the optical or coaxial DIGITAL OUT to a corresponding
digital audio input of compatible devices such as receivers,
computer soundcards or other digital processors.
5 RS 232
NAD is a certified partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
• Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the M32 via
compatible external controllers.
• Refer to the NAD website for information about RS232 Protocol
documents and PC interface program.
NOTES
• Use 16 gauge (American Wire Gauge or AWG) or lower stranded wire.
Connections to the M32 can be made with banana-type plugs.
• Bare wire or pins can also be used by loosening the terminal’s plastic
nut, making a clean, neat connection and re-tightening. To minimize
the danger of a short circuit, ensure that only 1/2-inch of exposed wire
or pin is used to connect and no loose strands of speaker wire.
РУССКИЙ
1 COAX 1-2, OPT 1-2
• Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
ITALIANO
9
DEUTSCH
8
7
IDENTIFICATION OF CONTROLS
REAR PANEL
ENGLISH
FRANÇAIS
7POWER
• The POWER switch supplies the master AC mains power for the
M32.
• When the POWER switch is set to ON position, the M32 goes to standby
mode as shown by the amber status condition of the front panel Power
indicator. Press the front panel Standby button or HTRM 2’s remote
control’s [ON] button to switch ON the M32 from standby mode.
• If you do not intend to use the M32 for long periods of time (such
as when on vacation), switch off the POWER switch.
• With POWER switched off, neither the front panel Standby button
nor HTRM 2 remote control’s [ON] button can activate the M32.
ESPAÑOL
8 DIGITAL AES/EBU
• Connect SACD/CD Players or processors to this XLR connector for
digital audio streaming.
• High-end sources with higher sampling rates (176kHz and 192kHz)
should be connected to the AES/EBU IN connector.
ITALIANO
9COMPUTER
• Use a Type A to Type B cable connector (not supplied), to interface
computer audio to this asynchronous Type B USB input to directly
stream 24/96 PCM content from your PC or MAC.
• The Type A-style connector is a flat, rectangular interface.
• The Type B-style interface is square in shape and has beveled
corners on the top ends of the connector.
• Refer to LISTENING TO COMPUTER in the OTHER FEATURES section
on the OPERATION page.
SUBWOOFER
• Use a dual RCA cable to connect PRE OUT/SUBW to the low level
input of a powered subwoofer.
• Low frequency information up to 200Hz is sent to the connected
subwoofer via PRE OUT/SUBW.
13 AC MAINS INPUT
• The M32 comes supplied with two separate mains power cords.
Select the mains power cord appropriate for your region.
• Before connecting the plug to the mains power source, ensure that
it is firmly connected to the M32’s AC Mains input socket.
• Always disconnect the mains power plug from the mains power
source before disconnecting the cable from the M32’s AC Mains
input socket.
14 FUSE HOLDER
• Only qualified NAD service technicians can have access to this fuse
holder. Opening this fuse holder may cause damage thus voiding
the warranty of your M32.
15 GROUND TERMINAL
• Ensure that the M32 is plugged-in to a grounded AC wall outlet.
• If necessary, use this ground terminal to connect to ground a
phono or turntable source for PHONO input.
• If a separate earth ground is necessary, use this terminal to ground
your M32. The M32 can be connected to ground by connecting a
ground lead wire or similar to this terminal. After insertion, tighten
the terminal to secure the lead.
10SERVICE
Use for servicing purposes only. Not for consumer use.
DEUTSCH
11INPUT
PHONO: Input for a Moving Magnet (MM) phono cartridge. Connect
the twin RCA lead from your turntable to this input if you are using a
Moving Magnet cartridge.
LINE1, LINE 2: Input for line level sources such as CD player, tuner or
any compatible devices. Use a twin RCA-to-RCA lead to connect the
source device’s left and right “Audio Output” to this input.
NEDERLANDS
12 OUTPUT (PRE-OUT/SUBW)
• These output terminals have dual function. They are used either as
PRE-OUT or SUBWOOFER terminals.
• The M32 and associated external devices must be turned OFF always
before connecting or disconnecting anything to the OUTPUT sockets.
SVENSKA
IMPORTANT
Set the “Sub Output” option under “Speaker Setup” settings to “ON” for
the OUTPUT terminals to function as Subwoofer out. On the other hand,
the OUTPUT terminals will function as PRE-OUT if the “Sub Output”
option is set to “OFF”.
РУССКИЙ
PRE-OUT
• The PRE OUT/SUBW sockets make it possible for the M32 to be used
as a full range preamplifier to an external power amplifier.
• Use a dual RCA cable to connect PRE-OUT/SUBW to the
corresponding analog audio input of compatible devices such as
amplifiers, receivers or other applicable devices.
• PRE-OUT/SUBW will be affected by the M32’s volume control
settings. Turn the VOLUME control to adjust the output level of the
PRE OUT/SUBW sockets.
8
NOTES
• The above illustration shows the M32 being connected to ground via
a metal water pipe. There maybe other grounding conductor points
in your home. Consult with a licensed electrician to locate or install
a grounding conductor in your home. NAD is not responsible for
any malfunction, damage or costs associated with the installation,
connection, or grounding of your M32.
• The grounding wire is not supplied with your M32.
IDENTIFICATION OF CONTROLS
MDC CLASSIC UPGRADE SLOTS
DD AP 1 (DIRECT DIGITAL ANALOG-PHONO)
The delivery format of digital content is constantly changing in pure digital
systems like the M32. Each of these formats typically requires specialized
hardware and software, often with licensed IP and content copy protection.
DD AP 1 uses high quality Analog-toDigital conversion to make analog sources
compatible with M32’s pure digital circuitry.
The PHONO circuit has impedance settings for
Moving Magnet (MM) and Moving Coil (MC)
with gain automatically set.
Consult with your NAD dealer on how to procure the DD HDM-1, the DD
AP 1 and MDC BluOS modules and their installations to the M32.
DD HDM-1 (DIRECT DIGITAL HDMI)
The DD HDM-1 offers three HDMI input terminals and one HDMI output
with video pass through. With DD HDM-1 installed, the M32 can be the
heart of a “Video 2.0” system using the mandatory 2 channel linear PCM
soundtrack from Blu-ray or DVD to make a compelling high definition
theater presentation. DD HDM-1 is fully 3D video compatible without
surround sound decoding or video processing.
A HDMI OUT: Connect the HDMI Monitor OUT to a
HDTV or projector with HDMI input.
B HDMI 1 -3: Connect to the HDMI OUT
connectors of source components such as DVD
player, BD player or HDTV satellite/cable box.
D
The DD AP 1 consists of the following line
level input terminals – PHONO, SINGLE-ENDED
(ANALOG) and BALANCED.
APHONO: Input for either a MM or MC
phono cartridge. Connect the twin RCA
lead from your turntable to this input.
B SE IN (SINGLE-ENDED): Use a twin RCA-to-RCA lead to connect these
sockets to the left and right analog output of a CD player, preamplifier
or processor.
C PHONO GROUND CONNECTOR: Turntables normally include a single
wire earth lead. Use the M32 phono ground connector to connect this
lead. Unscrew the terminal and insert the ground wire into the hole.
Tighten the terminal to secure the lead.
DBALANCED: Connect XLR audio sources to these connectors. Ensure
that proper pin configurations are followed – Pin 1: Ground, Pin 2:
Positive (signal live) and Pin 3: Negative (signal return).
MDC BluOS
A
B
BluOS is a music management software developed by NAD’s sister brand,
Bluesound. Integrating MDC BluOS will add BluOS network and internet
music streaming with advanced music management to your M32.
Refer to “MDC DD BluOS Mounting Instructions” and” Configuring DD
BluOS” for instructions on how to install and integrate the MDC BluOS with
the M32.
SVENSKA
NEDERLANDS
BluOS PLAYBACK CONTROLS
Using the HTRM-2 remote control, the following control buttons are
applicable for BluOS playback. Set DEVICE SELECTOR to MP for BluOS
playback control.
4 : Resume playback from pause mode.
; : Pause current playback.
7 : Skip back to the beginning of current song.
8 : Skip forward to the next song.
REPEAT : Repeat song, playlist, all or repeat off.
RANDOM : Play songs/playlist in random order.
РУССКИЙ
WARNING!
Before connecting and disconnecting any
HDMI cables, both the M32 and the source must be powered OFF and
unplugged from the AC outlet. Failure to do so may cause permanent
damage to equipment connected via HDMI sockets.
DEUTSCH
IMPORTANT NOTE
BluOS audio cannot be streamed through digital output terminals.
FRANÇAIS
B
ESPAÑOL
There are three optional MDC modules – the DD HDM-1, the DD AP 1 and
the MDC BluOS modules. Remove covers to install the optional Modular
Design Construction (MDC) modules.
A
ITALIANO
To address continuous technological evolution, NAD has placed all digital
interface circuitry of the M32 on easily upgradable modules, called Modular
Design Construction (MDC). The M32 includes one MDC module – the DD
SPDIF which has digital coaxial, optical and AES/EBU input terminals.
C
ENGLISH
REAR PANEL
9
ON
ON
ON
OPERATION
USING THE M32
OFF
OFF
OFF
DEVICE SELECTOR
DEVICE SELECTOR
DEVICE MP
SELECTOR
ENGLISH
MP
MP
NAVIGATING THE M32 FEATURES AND MAKING CHANGES
Use the HTRM 2 or applicable touch panel display items to select Sources, navigate through the M32 features and access to other functions. The following are
some of the key functions.
DAC
FEATURE/FUNCTION/ITEM
TOUCH PANEL DISPLAY
ON
HTRM 2 DAC
DAC
ON
Selecting Sources.
OFF
OFF
MUTE
FRANÇAIS
DEVICEMUSELECTOR
TE
MUTE
DEVICE SELECTOR
MP
MP
SOURCE
SOURCE
SOURCE
Access menu options.
DAC
DAC
ESPAÑOL
MUTE
MUTE
SOURCE
SOURCE
SLEEP
SLEEP
SLEEP
Scroll through the list.
ITALIANO
IN
SETUP
10
SIN
ETUP
SETUP
IN
IN10
10
PROGRAM
Playback/pause song.
PROGRAM
PROGRAM
8
88
DELIN
AIN
Y / PICTURE TEST / ZOOM
DELAY / PICTURE TEST / ZOOM
DELAY / PICTURE TEST / ZOOM
CLEAR
CLEAR
CLEAR
DEUTSCH
REPEAT
SLEEP
REPEAT
RESPLE
EA
ETP
EQ
TONE
L.NITE
EQ
EQ
TONE
TONE
L.NITE
L.NITE
DIMMER
DIMMER
DIMMER
SETUP
IN
IN
8
8
DELAY / PICTURE TEST / ZOOM
DELAY / PICTURE TEST / ZOOM
10CHANNEL
VOLUME
SIN
ETUP
NEDERLANDS
IN 10
DEVICE SELECTOR
must be setVOLUME
to MP.
CHANNEL
Skip to next song.
Skip back to previous song.
CHANNEL
PROGRA
M
CLEAVOLUME
R
REPEAT
PROGRAM
EQ
EQ
CLEAR
REPEAT
TONE
TONE
L.NITE
L.NITE
DIMMER
DIMMER
SVENSKA
CHANNEL VOLUME
DEVICE SELECTOR must
be set to MP.
CHANNEL
VOLUME
HTRM
2
HTRM 2
HTRM 2
РУССКИЙ
HTRM 2
HTRM 2
10
OPERATION
DAC
USING THE M32
ENGLISH
MUTE
Random playback.
SLEEP
SOURCE
ON
OFF
DEVICE SELECTOR
Repeat playback.
8
FRANÇAIS
IN
Press repeatedly to toggle random playback of current list, all
folders or random off.
MP
RANDOM. DEVICE
SETUPSELECTOR
DELAY / must
PICTURbe
E Tset
ESTto
/ ZMP.
OOM
OFF
INON
10
ON
PROGRAM
CLEAR
OFF
REPEAT
DEVICE SELECTOR
DAC
EQ
TONE
L.NITE
SLEEP
MP
DEVICE SELECTOR
MP
Press repeatedly to toggle repeat playback - current file, all folders
or repeat off.
Return to previous menu or display.
ESPAÑOL
DM
IMUMTE
ER
REPEAT. DEVICE
SELECTOR must be set to MP.
DAC
8
SOURCE
CHANNEL
IN VOLUME
DAC
ON
SETUP
OFF
DELAY / PICTURE TEST / ZOOM
IN 10
MUTE
PROGRAM
CMLU
ETAER
SOURCE
EQ
TONE
REPEAT
ITALIANO
DEVICE SELECTOR
MP
L.NITE
SOURCE
DIMMER
MENU. Any DEVICE SELECTOR setting.
Next, previous - level, function, option, etc.
DAC
HTRM 2
SLEEP
CHANNEL VOLUME
SOURCE
SETUP
IN
DEUTSCH
MUTE
8
SLEEP
DELAY / PICTURE TEST / ZOOM
SLEEP
IN 10
PROGRAM
EQ
ON
SETUP
IN 10
SETUP
10
CLEAR
HTRM
IN
TON8
E 2
NEDERLANDS
While at current menu display, use R/T to highlight option.
REPEAT
L.NITE
OFF
DELAY / PICTURE TEST / ZOOM
IN
8
DELADYIM
/M
PIE
CR
TURE TEST / ZOOM
PR
OGRAM
IN
CLEAR
REPEAT
PROGRAM
CLEAR
REPEAT
TONE
L.NITE
DEVICE SELECTOR
Cycle through Power indicator brightness
levels.
EQ
SVENSKA
SLEEP
MPthrough applicable
Use W/E to select or toggle
options, levels,
EQ
TONE
L.NITE
functions, etc. CHANNEL VOLUME
DIMMER
DAC
DIMMER
IN
8
DIMMER. DEVICE SELECTOR
must be set to AMP.
CHANNEL VOLUME
SETUP
IN 10
MUTE
PROGRAM
CLEAR
REPEAT
SOURCE
EQ
TONE
L.NITE
CHANNEL VOLUME
HTRM
2
MUTE. Any DEVICE SELECTOR
setting.
РУССКИЙ
Temporarily mute audio output or restore
audio from mute mode.
DELAY / PICTURE TEST / ZOOM
DIMMER
HTRM
2
CHANNEL
VOLUME
HTRM 2
11
OPERATION
USING THE M32
ENGLISH
DISPLAY MENU OPTIONS
MODE
The following display options are accessible via the touch panel display Main, Media, Mode, EQ and Setup.
MAIN
FRANÇAIS
Use the Main screen to select a Source. Use the arrows to navigate to the
required Source. In the following example the Main screen is displaying the
Coax 1 information.
The following listening modes, tailored for different types of recording or
program material, are provided.
ESPAÑOL
ITALIANO
Coax 1: Current Source.
-20.0 dB: Volume level.
: Go to previous or next Source.
48k: Sample rate.
Mono: Listening mode.
Negative: Polarity setting.
Tone: Tone control settings enabled.
Balance: Balance settings enabled.
Sub Stereo: Subwoofer mode setting.
LPF 200Hz, HPF 200Hz: Subwoofer frequency setting.
MEDIA
During BluOS playback, display switches to Media and show current song
title, artist name and album name if available.
STEREO
• Select “Stereo” when you wish to listen to a stereo production, such as
music CD or FM broadcast.
• Stereo recordings whether in PCM/digital or analog form and whether
surround-encoded or not encoded, are reproduced as recorded.
• Multi-channel digital recordings (Dolby Digital and DTS) are reproduced
in “Stereo Downmix” mode via the left and right speakers only.
MONO
• Use “Mono” listening mode when the audio source format is mono. The
mono information is replicated on both left and right channels.
• “Mono” listening mode is recommended when watching old movies
with mono soundtrack, listening to recorded monaural sound sources
such as AM radio broadcasts or with the foreign language soundtracks
recorded in the left and right channels of some movies.
• Mono is also very helpful when setting up a stereo system to check that
both speakers are connected with correct polarity. Correctly connected
speakers will have a solid center image and strong bass response. If one
speaker has the input connections (+ and -) reversed, the image will be
indistinct and the bass will be reduced and uneven sounding.
DEUTSCH
REVERSED
• Sends the right channel to the left speaker and the left channel to the
right speaker. This can easily correct a reversed input connection or
incorrectly recorded music source.
NEDERLANDS
POLARITY
This setting provides compensation for recordings that have reversed
polarity.
• Positive: A positive sine wave at the input remains positive at the
output. Polarity is defaulted to “Positive” setting.
• Negative: A positive sine wave at the input is negative (inverted) or
reversed at the output.
SVENSKA
РУССКИЙ
12
OPERATION
h : Slide to adjust treble, bass or balance level.
: Slide to turn ON or OFF Tone Controls. At OFF setting, tone
controls (Treble and Bass) are disabled or defeated – Balance option
remains available.
* The exception may be some electrostatic speakers that have very low
impedance at high frequency. The lower the HF impedance, the greater
the deviation from flat response.
SUB OUTPUT
At “ON” Setting, all subwoofer settings are in effect. At “OFF” setting, all
subwoofer settings are disabled. With Sub Output set to “ON”, the following
subwoofer settings can be setup.
FRANÇAIS
SPEAKER COMPENSATION
The digital impedance compensation filter provides fine tuning of the
top octave to match your speaker impedance. This results in perfectly flat
frequency response at 20 kHz. The effect of this filter may not be audible*
but it is measurable and it compensates for the small effect of the digital
reconstruction filter that eliminates the 844 kHz sampling frequency of the
amplifier.
ESPAÑOL
The M32 has the following Tone Control levels – Treble, Bass and Balance.
Bass and Treble controls only affect the low bass and high treble leaving
the critical midrange frequencies free of coloration. The Balance control
adjusts the relative levels of the left and right speakers.
SPEAKER SETUP
ITALIANO
EQ
ENGLISH
USING THE M32
SETUP
SVENSKA
РУССКИЙ
IMPORTANT
Set the “Sub Output” option under “Speaker Setup” settings to “ON” for
the OUTPUT terminals to function as Subwoofer out. On the other hand,
the OUTPUT terminals will function as PRE-OUT if the “Sub Output”
option is set to “OFF”.
NEDERLANDS
DEUTSCH
The Setup menu contains the menu options for Speaker Setup, Source
Setup, Digital Output and Control Setup.
13
OPERATION
USING THE M32
ENGLISH
SUB MODE
• Set the subwoofer mode to either mono or stereo setting.
Mono: Select this setting when using one subwoofer. At mono mode,
the left and right channels are summed in the low pass subwoofer
output to drive a single subwoofer.
Stereo: Select this setting when using two subwoofers, one for the left
channel and one for the right channel.
FRANÇAIS
MAIN FREQUENCY (40Hz to 200Hz and Full)
MAIN TRIM (-12.0dB to 0.0dB)
• Crossover allows easy bi-amplification or subwoofer integration
by adding the required filters to redirect bass frequencies to the
subwoofer.
• Frequencies from 40Hz to 200Hz and Full can be selected, with the high
pass signal sent to the amplifier section and the low pass signal sent to
Subwoofer Out.
When a Slot line item is selected, the following menu options will be displayed.
Enabled: Source input can be enabled (ON) or disabled (OFF).
Name: Source input name. Selecting this line item will lead to the menu
keyboard where one can type the preferred name for the current source.
ESPAÑOL
SUB FREQUENCY (40Hz to 200Hz and Full)
SUB TRIM (-12.0dB to 0.0dB)
• Selected subwoofer crossover frequency and below will be redirected
to subwoofer output.
• Sub trim provides exact volume matching of the subwoofer level to the
main speaker level.
ITALIANO
NOTE
Since the low pass filter is already implemented in the M32, the
subwoofer should be set to the highest frequency crossover setting
available or bypassed if it also includes a crossover function.
SOURCE SETUP
DEUTSCH
Source Setup makes it possible to select a Source and enable or disable it
as desired. The optional DD AP‑1 (Direct Digital Analog Phono), DD HDM‑1
(HDMI) and MDC BluOS modules must be installed to select Sources like
Single-ended, Balanced, Digital HDMI 1 or BluOS. If the applicable module
is not installed, the corresponding sources will not be available from the
Source Setup menu selection.
NEDERLANDS
SVENSKA
--- : Non-MDC or built-in sources.
Slot A : Location slot of the Source module (MDC) in the rear panel.
Cable TV : Source name for Line 1 input. Source name can be changed in
the “Name” section shown below.
РУССКИЙ
14
VOLUME CONTROL
The M32 VOLUME control function is dependent upon the “Volume
Control” menu setting. Volume control can either be set to “Fixed” or
“Variable”. Select “Save” to store selected “Volume Control” and “Fixed Level”
or “Variable” settings.
Fixed
If “Volume Control” is set to “Fixed”, audio output level is fixed and the
M32’s volume control is bypassed. With “Fixed” volume control setting,
the M32 becomes like a basic amplifier with volume controlled by an
external device.
• Set “Fixed Level” to desired preset dB level. Audio output is fixed
to the selected level after saving the setting. Audio output level
will not change when using the Volume control or HTRM 2’s
[VOL R/T].
• At “Fixed Level” setting, the volume control or HTRM 2’s [VOL R/T]
will have no effect and effectively disabled.
Variable
• When set to “Variable”, audio output level is directly adjustable using
the volume control or HTRM 2’s [VOL R/T].
The following additional menu options are included if LINE 1 or LINE 2
input is selected.
OPERATION
Sample Rate (48 kHz, 96 kHz, 192 kHz): Select the user’s preference
for sample rate of the Analog-to-Digital Converter. Higher sampling rates
allow for anti-aliasing filters to take effect further outside the audible
frequency range and are generally considered to sound better, especially
in the high frequencies. This option is applicable only for LINE 1 and LINE 2.
DIGITAL OUTPUT
Sample setup of two NAD products on the same Zone
M32 and T 787 are both defaulted to IR Channel 0. If [OFF] button is pressed
on the HTRM 2 remote control (or HTR 8 remote control for the T 787), both
products will go to standby mode. Press [ON] and both products will power
up from standby mode.
To prevent both products from simultaneously going in and out of standby
mode along with other common commands, set each one to a different
IR channel. In this setup, we will keep T 787 and HTR 8 remote control
defaulted to “IR Channel 0”. As for M32, we will assign it to “IR Channel 1”;
the same applies to HTRM 2.
FRANÇAIS
Analog Gain: -12dB to 0dB. Gain adjustment allows all sources to play
back at the same volume level so you don’t need to adjust the volume
every time a new source is selected. It is generally preferable to reduce the
level of the loudest source rather than making louder the softer sources.
ENGLISH
OTHER FEATURES
Set M32 and HTRM 2 to “IR Channel 1” via the following procedure.
CONTROL SETUP
ITALIANO
SAMPLE RATE (48 kHz, 96 KHZ, 192 kHz)
Audio inputs may come from various sources with different sampling rates.
Select 48 kHz, 96 kHz or 192 kHz to convert all digital audio output content
to single sampling rate.
HTRM 2
Ensure the M32 is powered-up (“on”, not merely in standby).
1 Press and hold together the [AMP] and [A/V PSET] buttons until the
Learn LED (located between HTRM 2’s ON and OFF buttons) turns
steady green. Release both buttons.
2 While keeping the HTRM 2 pointed towards M32, press “1”, “1”, “0” and “0”
using HTRM 2’s numeric buttons.
3 Press [OFF]. If the M32 goes to standby mode, this indicates that the
library input is successful.
4 Press [ENTER] to accept the library code input and exit the Library
mode.
ESPAÑOL
M32
• Select “1” as the IR Channel setting of the M32.
With both M32 and HTRM 2 set to “IR Channel 1”, the M32 can now be
remotely controlled independent of the T 787.
NEDERLANDS
IR CHANNEL
The M32 has the capability to operate via Alternate IR channel. This is useful
if you have two NAD products that can be operated by similar remote
control commands. With alternate IR Channel, two different NAD products
can be controlled independently in the same zone by setting each one to a
different IR channel.
LISTENING TO COMPUTER
Use Type A to Type B cable connector to directly stream 24/192 PCM
content from your PC or MAC to the M32. Ensure that the Sound or Audio
device setting of your computer is set to “NAD USB Audio”.
MINIMUM PC SYSTEM REQUIREMENT
Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7
FOR MAC USERS
Minimum Mac OS X Snow Leopard (version 10.6) and later versions
SVENSKA
AUTO STANDBY
Allows the option of the M32 going to standby mode after 15 minutes of
inactivity or remain at operating mode regardless of any source activities.
ON: M32 will automatically go to standby mode if there are no user
interface interaction and no active source within 15 minutes.
OFF: M32 remains at operating mode even if there is no user interface
interaction and no active source within 15 minutes. This is the default setting.
DEUTSCH
NOTE
Performing a Factory Reset for HTRM 2 will result to a return to the
factory default “IR Channel 0” setting.
IR Channel Assignment
The M32 and the HTRM 2 remote control must be set to the same channel.
РУССКИЙ
To change the IR Channel on the HTRM 2 remote control
• Include a channel number before the library code. For HTRM 2, library
code “100” is the default library table for “AMP” device. To select this
“AMP” library table for “IR Channel 0”, retain the library code “100”.
• If you want to load the “AMP” library table on “IR Channel 1”, prefix the
library code with “1” to indicate association with “IR Channel 1”. Load
then the “AMP” library table using the code “1100”.
15
OPERATION
OTHER FEATURES
ENGLISH
BluOS MENU
FRANÇAIS
BluOS “Menu” becomes available if the optional MDC BluOS is installed.
BluOS “Menu” can be accessed directly from the touch panel display. Select
“Menu” during BluOS playback as above. The following are the BluOS menu
options – Info, BluOS Reboot, BluOS Factory Reset and Service Menu.
SERVICE MENU
Service Menu has two options - “BluOS Upgrade Mode” or “BluOS Service Mode”.
BluOS UPGRADE MODE
Select “Yes” to initiate BluOS upgrade mode. Ensure that the MDC BluOS
is connected wired or wirelessly. Follow the display screen prompt to
complete the upgrade procedure.
ESPAÑOL
ITALIANO
INFO
Display information about the installed MDC BluOS module like the sample
shown below.
DEUTSCH
BluOS REBOOT
Select “Yes” to restart the MDC BluOS.
NEDERLANDS
SVENSKA
BluOS FACTORY RESET
Initiate the restoring of the MDC BluOS to its factory default settings. Select
“Yes” to initiate factory reset or “No” to maintain current settings.
РУССКИЙ
16
BluOS SERVICE MODE
Use for servicing purposes only. This is a feature normally associated and
coordinated with authorized service personnel.
OPERATION
ENGLISH
USING THE HTRM 2 REMOTE CONTROL
The NAD HTRM 2 is ready to operate the M32 right out of the box, but it is really eight remotes in one.
Each of the 8 Device Selector keys at the top of the handset can call up a new “page” of remote control
codes to be transmitted by the remaining keys. You may “teach” codes from any infrared-remote
controlled component, regardless of brand, to any or all of these.
ON
Obviously, the most logical system is that you teach the codes from your BD player to the [BD] Device
Selector “page,” your television’s codes to the [TV] “page,” and so on, but there is no required scheme:
You may load any commands to any key on any page (see “Learning Codes From Other Remotes,”
below).
Note: For use with the M32, it should not be necessary to re-program any keys on the HTRM 2 [AMP]
page. However, in order for the HTRM 2 to control your specific NAD-brand components you may
need to load one or more different code-libraries (see “Loading Code Libraries,” below).
FRANÇAIS
DEVICE SELECTOR
MP
DAC
MUTE
ESPAÑOL
The HTRM 2 is already preprogrammed with a full complement of commands for the M32 on its
[AMP] Device Selector page, and as well as with library commands to operate most NAD-brand CD,
BD or DAC components on the corresponding Device Selector “pages.” These default commands are
permanent: Even if you teach the HTRM 2 new commands to take their place, the underlying library
commands remain in place and can easily be recalled should you add an NAD component to your
system later (see “Delete Mode”, below).
OFF
SOURCE
CONTROLLING THE M32
ITALIANO
The HTRM 2 is divided into two main sections. Eight Device Selector keys at the top—[AMP], [MP,]
[TV,] and so on—set the handset’s remaining keys to a “page” of commands to control a particular
component. A Device Select key determines only what component the HTRM 2 will command; it
does not perform any function on the M32. All of the remaining keys are function keys that can “learn”
control codes from virtually any infrared remote controller, allowing you to teach the codes of your
equipment, regardless of brand, to the HTRM 2.
SLEEP
It is important to note that certain HTRM 2 keys perform different functions depending on the selected
Device Selector “page.”
IN
SETUP
DEUTSCH
However, the HTRM 2 is already preprogrammed to operate the M32. All of the function keys on the
[AMP] Device Selector “page” perform M32 functions. (The HTRM 2 can also command many other
NAD components, from its [CD], [BD], [DAC] and [CUSTOM] pages.)
8
DELAY / PICTURE TEST / ZOOM
CLEAR
REPEAT
EQ
TONE
L.NITE
DIMMER
SVENSKA
CHANNEL VOLUME
HTRM 2
РУССКИЙ
Begin by positioning the HTRM 2 “nose-to-nose” with the source remote so the two devices’ infrared
windows are about 2 inches apart.
1 Enter Learning Mode: On the HTRM 2, simultaneously press-and-hold for 3 seconds both a Device
Selector key and the [RES] key until the Learn LED (located between HTRM 2’s ON and OFF buttons)
turns steady green.
2 Press the HTRM 2’s function key you wish to teach a command; the Learn LED will turn amber.
3 Press-and-hold the function key on the source remote: The HTRM 2’s Learn LED will flicker amber
for a second or two, then turn solid green. The command is learned.
4 Press the HTRM 2’s Device Selector key again to exit the learning mode.
PROGRAM
NEDERLANDS
IN 10
LEARNING CODES FROM OTHER REMOTES
17
OPERATION
USING THE HTRM 2 REMOTE CONTROL
ENGLISH
If the Learn LED does not flicker amber you may need to vary the distance
between the remotes. If the Learn LED turns red instead of green, the
source remote command could not be learned on that attempt.
FRANÇAIS
Example: Learning “BD Pause”
Position the HTRM 2 and your BD player’s remote as described above.
1 On the HTRM 2, simultaneously press-and-hold [BD] and [RES]; the Learn
LED turns steady green.
2 Press the HTRM 2’s Pause [ j ] key; the Learn LED turns amber.
3 Press-and-hold the corresponding Pause key of your BD player’s remote
control; the HTRM 2’s Learn LED flickers amber and then turns solid
green. The command is learned.
4 Press [BD] again to exit the learning mode.
ESPAÑOL
NOTES
• The DEVICE SELECTOR keys can themselves be configured to learn commands.
• Press and hold a configured DEVICE SELECTOR for at least 2 seconds to
execute a function assigned to the particular DEVICE SELECTOR key.
• A short press of a configured DEVICE SELECTOR will just switch the active
device.
CANCEL OPERATION
You can cancel configuring a key, by pressing the active Device Selector key
before the learn process is complete; the Learn LED will turn red.
ITALIANO
PUNCH THROUGH
The HTRM 2’s “punch-through” function allows you to retain a function key
from one Device Select “page” to another, so that, for example, the AMP
[SURR MODE] function might still control the M32 when the BD Device
Selector page is active.
DEUTSCH
NOTE
The HTRM 2’s [VOL R/T] keys are pre-programmed as “punchedthrough” for all Device Selector pages: [VOL R/T] will operate the
M32’s master-volume regardless of the currently selected device. The
[SURR] [CENT] and [SUB] Channel Volume controls similarly are preprogrammed as punched-through.
NEDERLANDS
SET A PUNCH THROUGH
1 Enter Learning Mode and press the desired button to be punched
through.
2 Press twice the Device Selector button of the destination device. The
status LED will turn green.
3 Press the Device Selector button again to exit Learning Mode.
SVENSKA
Example: Punch-through AMP [SURR MODE] key to the BD “page”
1 On the HTRM 2, simultaneously press-and-hold [BD] and [RES]; the Learn
LED turns steady green.
2 Press [SURR MODE]; the Learn LED turns amber.
3 Press [AMP] twice; the Learn LED turns green.
4 Press [BD] again to exit the learning mode.
РУССКИЙ
18
COPY A COMMAND FROM ANOTHER KEY
You may copy a command from any HTRM 2 key to any other key.
COPY A KEY FUNCTION
1 Enter Learning Mode.
2 Press the key that will contain the copied key. The Learn LED turns
steady amber.
3 If the key to be copied resides on another “page”, press first the
corresponding Device Selector key and then press the desired key to be
copied. The Learn LED turns steady green.
4 Press the Device Selector key again to exit Learning Mode.
Example: Copy the Pause command from the CD page to the AMP [ j ]
button:
1 On the HTRM 2, simultaneously press-and-hold [AMP] and [RES]; the
Learn LED turns steady green.
2 Press Pause [ j ] ; the Learn LED turns amber.
3 Press [CD]; press Pause [ j ] ; the Learn LED turns green.
4 Press [AMP] again to exit the learning mode.
NOTE
The copy and punch-through functions are similar. However, if you
copy a command and then subsequently delete, or over-write the
original (source-key) command , the copied-to key’s command remains
unchanged. If you punch-through to a command and then delete or
over-write the original key, the punched-through functions also change
accordingly.
MACRO COMMANDS
A “macro” command is a series of two or more remote codes issued
automatically from a single keypress. You might use a macro to automate a
simple command sequence, such as, “Turn on the BD player and then press
PLAY”. Or you might compose an elaborate macro to power up an entire
system, select a source, choose a Listening Mode, and begin playback—
again, all from a single keypress. Each DEVICE SELECTOR and function keys
of the HTRM 2 can be stored one macro.
NOTE
Macros are independent of the currently selected device.
RECORDING MACROS
1 Simultaneously press-and-hold the [MACRO] key and the HTRM 2
function key to be assigned the macro until the status LED turns green.
The macro button will also light up.
2 Press the sequence of function keys to be recorded into the macro.
3 Be sure to press first the required Device Selector key for each function
(you may switch devices while recording the macro as many times as
necessary), allowing you to create macro containing commands from
more than one Device Selector “page.”
4 After entering the desired command sequence, press [MACRO] again to
store the macro; the Learn LED and [MACRO] key illumination will turn
off.
OPERATION
CONFIGURING KEY ILLUMINATION
Mode
DISP + Digit Key (0-9)
Set key illumination timeout to number of
seconds corresponding to digit key. Zero turns off
the key illumination entirely.
DISP + OFF
Disable light sensor. Key illumination will turn on
with any key press.
DISP + ON
Enable light sensor.
To clear a macro, perform the above steps without entering any functions.
DISP + ENTER
Set the light sensor threshold to the current
light level.
NOTE
Each macro can store a maximum of 64 command steps. If you exceed
this number, the macro will be stored automatically after the 64th
command is added.
DISP + RTN
Restore all key illumination settings to the
defaults.
KEY ILLUMINATION TIMEOUT
The HTRM 2’s key-illumination can be set to remain lit for 0-9 seconds. The
default value is 2 seconds.
SET THE ILLUMINATION TIMEOUT
1 Simultaneously press and hold the HTRM 2’s [DISP] and the [0-9] key
corresponding to the desired timeout duration.
2 The Learn LED will flash twice to confirm the new setting.
3 When set to zero, the illumination will not turn on at all.
NOTES
• Key illumination is activated when one presses any HTRM 2 key.
• If HTRM 2 senses movement, key illumination is activated without
having to press a key. If HTRM 2 is shaken, key illumination is also
activated.
• Key illumination is the biggest drain on the HTRM 2’s batteries. A short
key illumination timeout will extend battery life appreciably; turning it
off altogether (set it to 0 seconds) will lengthen it still further.
DELETE MODE
The HTRM 2 can store learned, copied, and “default library” commands on
any single key. The default library commands are the pre-programmed NAD
codes, such as the native M32 commands on the [AMP] page.
You can delete commands by layers back “down” to the default library
command on any key, removing learned commands, punched-through
functions, and copied keys.
NOTE
The default library commands cannot be deleted.
ENTER DELETE MODE
1 Simultaneously press-and-hold the desired key’s Device Selector key
and the [RTN] key for 3 seconds, until the Learn LED turns green.
2 Press the function key whose command you wish to delete; the Learn
LED flashes; the number of times indicates which type of function has
become active - see the table below.
3 Press the active Device Selector key again to exit Delete Mode.
NOTE
You can delete multiple function-key commands on the same Device
Selector “page”. To delete more than one Device Selector page, exit
Delete mode and then re-enter the required page.
Flashes
ESPAÑOL
ITALIANO
NOTE
Release [ON] and [RTN] before the second flash goes out; otherwise, the
unit will not reset. Should this occur, repeat the full procedure.
DEUTSCH
NOTE
When a macro executes, a 1 second delay is automatically inserted
between its commands. If you need more than a 1 second delay between
particular commands—for example, to permit a component to power
up completely—you can record “empty” steps into the macro by
changing Device Selector “pages” without entering actual command
functions.
PERFORM A FACTORY RESET
1 Simultaneously press-and-hold the HTRM 2’s [ON] and [RTN] keys for 10
seconds. The Learn LED will start to flash green.
2 Release [ON] and [RTN] before the second flash is complete; the Learn
LED will turn red, indicating the remote has been reset.
SVENSKA
Pressing any other HTRM 2 key while a macro is executing will abort the
macro. Remember that you must hold the HTRM 2 so that its infrared
emitter can activate the target components.
FACTORY RESET
The HTRM 2 can be reset to its factory state, deleting all learned commands,
copied and punched-through keys, macros, and other setup information,
reverting all keys to their pre-programmed library commands.
Command Type
1
Default Library Command
2
Copied Library Command
3
Learned Command
РУССКИЙ
EXECUTING MACROS
1 Press and release [MACRO]; its key lights for 5 seconds. While it remains
lit, press an HTRM 2 key where a macro has been stored.
2 The corresponding macro will run; as each step executes, its “parent”
Device Selector’s key flashes briefly.
3 When finished, the [MACRO] key illumination goes out.
FRANÇAIS
Keys to Press (for 3 seconds)
NEDERLANDS
Example: Record a Macro to the [0] key to Turn on the M32.
1 Select “Input 1” (Source 1), and commence playback of connected
Source 1 device (as in BD player).
2 On the HTRM 2, simultaneously press-and-hold [MACRO] and [0]
(numeric zero); the Learn LED turns steady green.
3 Press [AMP]; press [ON]; press [1] (“Input or Source 1”); press [BD]; press
[4] (Play) - the Learn LED blinks as each step is added.
4 Press [MACRO] again to exit the macro-record mode.
ENGLISH
USING THE HTRM 2 REMOTE CONTROL
19
OPERATION
USING THE HTRM 2 REMOTE CONTROL
ENGLISH
FRANÇAIS
ESPAÑOL
LOADING CODE-LIBRARIES
SEARCH MODE
The HTRM 2 can store a different library of default NAD codes for each of its
Device Selector “pages.” If the original default library does not control your
NAD CD player, BD player, or other component, follow the procedure below
to change the code-library.
1 Begin by ensuring that the component you wish the HTRM 2 to control
is plugged in and powered-up (“on,” not merely in standby).
2 To enter the HTRM 2s Library Mode, simultaneously press-and-hold
both the desired Device Selector key and the [A/V PSET] key for 3
seconds, until the Learn LED turns green.
3 While keeping the HTRM 2 pointed toward the component, enter the
first appropriate three-digit code-library number from the table below.
4 Press [OFF]. If the component turns off, press [ENTER] to accept that
code-library number and exit the Library Mode.
5 If the component does not turn off, enter the next three-digit codelibrary number from the table.
6 When you enter the correct number the component will turn off; press
[ENTER] to accept that code library number and exit the Library Mode.
If none of the codes from the table work, turn on the component and try
the “search” method as follows:
1 Enter Library Mode by simultaneously pressing-and-holding for 3
seconds the desired Device Selector key and the [A/V PSET] key, until
the Learn LED turns green.
2 Press-and-hold the HTRM 2’s [R] or [T]) key. The remote will step
through all the available codes at a rate of approximately 1 per second.
3 When the component turns off, release the cursor key.
4 Press [ENTER] to accept that code library and exit Library Mode.
5 Try a few commands. Should you prove to have stepped past the
needed code-library, re-enter the Library Mode and use the cursor key
to step back to it.
LIBRARY
CODE
NAD PRODUCT
DESCRIPTION
Receiver/Processor
(Discrete ON/OFF)
Receiver/Processor
(Toggle ON/OFF)
S170
LIBRARY
CODE
NAD PRODUCT
DESCRIPTION
300
Tuner
301
L75, L76 Tuner
302
L70 Tuner
303
L53 Tuner
304
L73 Tuner
3112
L75
Second Zone Commands
(Zone 2)
Zone 3
305
C425
4112
Zone 4
306
C445
105
L70
307
Txx5 Series Tuner
106
L76
400
Tape Deck B
107
118
401
TAPE Deck A
108
L53
500
TV 280
109
L73
501
MR13
Mode
110
Stereo Receiver / Amplifier
502
MR20
Learn/Copy/Punch Through
Device Key + RES Key
Device Key + RTN Key
100
101
102
ITALIANO
103
104
DEUTSCH
NEDERLANDS
SVENSKA
РУССКИЙ
20
NOTE
It is possible that search mode will find code-libraries that operate, at
least partially, some other brand (non-NAD) components. However, we
can only ensure the completeness or accuracy of NAD code-libraries. We
do not support the HTRM 2’s operation with other-brand components.
CHECKING CODE LIBRARY NUMBER
1 Enter Library Mode by simultaneously pressing-and-holding for 3
seconds the desired Device Selector key and the [A/V PSET] key, until
the Learn LED turns green.
2 Press the [DISP] key.
3 The HTRM 2 indicates the current code-library by flashing its [DAC],
[CUSTOM], and [MACRO] keys.
For example, to indicate code-library #501, the HTRM 2 will flash [DAC] 5
times, pause, and then flash [MACRO] once. You might wish to make a note
of your components’ code-library numbers.
SUMMARY OF THE HTRM 2 MODES
Keys To Press (for 3 seconds)
111
Stereo Second Zone
503
PMR45
Delete Mode
112
Txx5 Series
600
T535, T562, T585, M55
Macro Record
Macro Key + Function Key
Device Key + [A/V PSET] Key
200
CD Player
601
T550, L55
Library Mode
201
CD Player (old)
602
T512, T531, T532, T571, T572
Back Light Timeout
DISP Key + Digit Key
Factory Reset
See “Factory Reset” above
202
5170, 5240, 5340
603
L70, L73 BD
203
5325
604
204
5060
605
205
M5
606
L56
T513, T514, T515, T517,
T524, T533, T534
L53 BD
OPERATION
ENGLISH
USING THE HTRM 2 REMOTE CONTROL
BATTERY INSTALLATION
FRANÇAIS
1 Use the flat or rounded end of a pointed tool to push open the pin of
the battery cover.
ESPAÑOL
2 Open the battery hatch.
DEUTSCH
ITALIANO
3 Insert the supplied four AA batteries.
NEDERLANDS
4 Push the battery hatch until it clicks close.
РУССКИЙ
SVENSKA
5 Restore the battery cover.
21
REFERENCE
SPECIFICATIONS
ENGLISH
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
PREAMPLIFIER SECTION
LINE INPUT, PRE OUT
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Channel separation
FRANÇAIS
Input impedance (R and C)
Maximum input signal
Output impedance
Input sensitivity
Frequency response
Maximum voltage output -IHF load
Tone controls
ESPAÑOL
PHONO INPUT, PRE OUT
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
<0.013 % at 2 V out
>97dB (IHF; A-weighted, ref. 500 mV out, unity gain)
>105 dB (1 kHz)
>85 dB (10 kHz)
10 kohms + 100 pF
>4 Vrms (ref. 0.1 % THD)
240 ohms
146 mV (ref. 500 mV out, Volume maximum)
±0.3 dB (20 Hz - 20 kHz)
>2 V (ref. 0.1 % THD)
Treble: ±10 dB at 20 kHz
Bass: ±10 dB at 60 Hz
Balance: -10 dB
<0.03 % at 2 V out
>80dB (200 ohms source; A-weighted, ref. 500 mV out)
>76dB (MM cartridge source, IHF; A-weighted, ref. 500 mV out)
ITALIANO
DEUTSCH
Input sensitivity
2.38 mV (ref. 500 mV out, Volume maximum)
Frequency response
±0.3 dB (20 Hz - 20 kHz)
Maximum input signal at 1kHz
>66 mV rms (ref. 0.1 % THD)
LINE INPUT, HEADPHONE OUT
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Frequency response
Channel separation
Output impedance
<0.005 % at 1V out
>110 dB (32 ohms loads; A-weighted, ref. 2V out, unity gain)
±0.3 dB (20 Hz - 20 kHz)
>60 dB at 1kHz
0.5 ohm
NEDERLANDS
GENERAL SPECIFICATIONS
LINE IN, SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Clipping power
IHF dynamic power
Peak output current
Damping factor
Frequency response
Channel separation
SVENSKA
Input sensitivity
Supports bit rate/sample rate
Standby power
DIMENSION AND WEIGHT
Gross dimensions (W x H x D) *
РУССКИЙ
Net weight
Shipping weight
180 W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
<0.03 % (250 mW to 180 W, 8 ohms and 4 ohms)
>91 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>195 W (at 1 kHz 0.1 % THD)
8 ohms: 220 W
4 ohms: 360 W
2 ohms: 400 W
>30 A (in 1 ohm, 1 ms)
>160 (ref. 8 ohms, 20Hz to 6.5kHz)
±0.3 dB (20 Hz - 20 kHz)
>77 dB (1 kHz)
>70 dB (10 kHz)
590 mV (for 180 W in 8 ohms)
up to 24 bit/192 kHz
<0.5 W
435 x 133 x 396 mm
17 1/8 x 5 1/4 x 15 5/8 inches
9.8 kg (21.6 lbs)
18.5 kg (40.8 lbs)
* - Gross dimension includes feet, volume knob and extended rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please check out www.NADelectronics.com for the latest information about M32.
22
23
РУССКИЙ
SVENSKA
NEDERLANDS
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
ENGLISH
www.NADelectronics.com
©2016 NAD ELECTRONICS INTERNATIONAL
A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
While every effort has been made to ensure the contents are accurate at the time of publication, features and specifications may be subject to change without prior notice.
M32_eng_OM_v07 - Oct 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising