SY4200, SY6125, SY6125Y
SynergySeries
Multi-Channel Power Amplifiers
Multi-channel power amplifiers have become a very popular item for today’s contractors. Whether the
application be a multi-zone bar, club or museum, many audio and A/V integrators, as well as production
companies, enjoy the convenience that a compact multi-channel power amplifier has to offer.
In addition to high-end performance and reliability, the Synergy multi-channel range offer many smart
features including a Low-Pass Filter (defeatable) on selected outputs including bridged outputs. This enables
the Synergy multi-channel range to drive subwoofers without the need for an external crossover.
From an engineering design standpoint, multi-channel power amplifiers offer many challenges and need to
be meticulously designed and tested. Heat dissipation, board layout and component quality must be
maximized to ensure a first class result.
The Australian Monitor Synergy Series meets these challenges and goes beyond the needs of almost any
demanding installation and at a price most can afford.
SY4200 (4 x 200w @ 4 ohms)
SY6125 (6 x 125w @ 4 ohms)
SY6125T (6 x 70v/100v transformer pack for SY6125)
SynergySeries
Features include
Specifications
SY4200
Output power per channel at 4 ohms
Output power per channel at 8 ohms
Output power in bridge mode at 8 ohms
Frequency Response
Distortion
Input Sensitivity
Voltage Gain
Slew Rate
Damping Factor
Signal to Noise
Input Impedance
Input clipping
Cooling
Amplifier Indicators
Amplifier Controls
Amplifier Protection
Low Pass Filter
Dimensions
Net weight
Shipping weight
Shipping dimensions
200W
132W
400W (channels C+D)
15Hz-60kHz +/-3dB
<0.03%
1Vrms
28.3
>40V/usec
>400:1
97dB
20kohm
+20dBV
Front to Back
Power, Status(Signal/Clip),
Overload, Thermal, Fault
Volume, Ground Lift, Bridge
Switch, Low Pass Filter, Limiter
Current Limiting, DC Protection,
mains fuse, DC rail fuses, Slow
Start, Thermal Cutout
125Hz 18dB/oct (channel C)
87x482x400 HxWxD mm
12kg
14kg
210x540x470 HxWxD mm
SY6125
Output power per channel at 4 ohms
Output power per channel at 8 ohms
Output power in bridge mode at 8 ohms
Frequency Response
Distortion
Input Sensitivity
Voltage Gain
Slew Rate
Damping Factor
Signal to Noise
Input Impedance
Input clipping
Cooling
Amplifier Indicators
Amplifier Controls
Amplifier Protection
Low Pass Filter frequency and slope
Net weight
Shipping weight
Dimensions
Shipping dimensions
SY6125 with Optional SY6125T
Output power per channel at 100v line
Output power per channel at 70v line
Output power per channel at 8 ohms
(transformer isolated)
SY6125T Net weight
SY6125T Shipping weight
SY6125T Dimensions
SY6125T Shipping dimensions
125W
85W
250W (channels B+C, D+E)
15Hz-80kHz, +/-3dB
<0.03%
1Vrms
22.3
>40V/usec
>250:1
97dB
20kohm
+20dBV
Front to Back
Power, Status(Signal/Clip),
Overload, Thermal, Fault
Volume, Ground Lift
Current Limiting, DC Protection,
mains fuse, DC rail fuses, Slow
Start, Thermal Cutout
125Hz 18dB/oct
(channels B+E)
15kg
17kg
87x482x450 HxWxD mm
210x550x550 HxWxD mm
125W
125W
125W
20kg
22kg
87x482x400 HxWxD mm
210x540x470 HxWxD mm
Engineered and Distributed by Audio Telex Communications Pty Ltd
149 Beaconsfield Street, Silverwater, Sydney NSW 2128, Australia
NSW
VIC
QLD
SA
WA
NZ
Tel
Tel
Tel
Tel
Tel
Tel
(02)
(03)
(07)
(08)
(08)
(09)
9647 1411
9890 7477
3852 1312
8352 4444
9228 4222
415 9426
ABN 78 001 345 482
Fax
Fax
Fax
Fax
Fax
Fax
(02)
(03)
(07)
(08)
(08)
(09)
9648 3698
9890 7977
3252 1237
8352 4488
9228 4233
415 9864
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Custom designed, 2RU heavy duty steel chassis.
Symmetrical layout - even weight distribution.
High current power supply.
High efficiency toroidal mains transformer.
Binding post outputs.
Balanced inputs and buffered attenuators.
1 Watt output indication (2.828 volts).
1 dB below output clip indication.
Efficient front to back cooling.
Dual, twin speed axial fans.
Multi-role output fault indication.
Front carry handles.
Rear rack mount ears.
Signal ground lift switch.
Multi-channel or bridged operation.
Built in limiter circuit.
High-quality, close-tolerance components.
The Synergy Series also feature many levels
of protection to ensure a reliable and
trouble-free installation.
•
•
•
•
•
•
•
Suppression of inrush current at mains turn-on.
Input muting at turn-on.
Input overvoltage protection.
Radio-frequency interference suppression.
Short-circuit protection and indication.
High overload mains fuse.
Internal, independent DC supply rail fuses.
Synergy SY4200
The Synergy SY4200 is a quad power amplifier ideal for
bar, boardrooms and other multi-channel applications.
Features include:
• 4 x 200 watts @ 4 ohms.
• 4 x 132 watts @ 8 ohms.
• 2 RU Chassis.
• On board limiters individually switchable per amp.
• Channels A & B, and Channels C & D bridgeable
to deliver 400 watts @ 8 ohms.
• Low pass filter individually switchable to channel C
(C & D when bridged).
Synergy SY6125
The Synergy SY6125 is a six channel power amplifier,
ideal for bars, hotels, multi-room systems and more.
The SY6125 features:
• 6 x 125 watts @ 4 ohm.
• 6 x 85 watts @ 8 ohms.
• 2 RU chassis.
• On board limiters individually switchable per amp channel.
• Channels B & C, and Channels D & E bridgeable to deliver
250 watts @ 8 ohms.
• Low pass filters (125Hz for subwoofers) individually
switchable to channel B (B & C when bridged) &
channel E (D & E when bridged).
• Optional SY6125T transformer pack available for 6 x125
watts @ 70/100 volt line or transformer isolated 8 ohms.
Synergy SY6125T (use with the SY6125)
The Synergy SY6125T is an optional transformer pack for the
SY6125. Featuring the same aesthetics as the SY6125 and also
mounted in a 2RU chassis, the SY6125T includes six high
quality toroidal transformers for 70v or 100v line applications.
The SY6125T in conjunction with the SY6125 features:
• 6 x 125 watts @ 100 volt line.
• 6 x 125 watts @ 70 volt line.
• 6 x 125 watts @ 8 ohms (transformer isolated).
• 2 RU chassis.
International Enquiries international@audiotelex.com.au
Website www.australianmonitor.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising