certificate of accreditation
CERTIFICATE OF ACCREDITATION
ANSI-ASQ National Accreditation Board
500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044
This is to certify that
gh Package & Product Testing and Consulting, Inc.
4090 Thunderbird Lane
Fairfield OH 45014
has been assessed by ANAB
and meets the requirements of international standard
ISO/IEC 17025:2005
while demonstrating technical competence in the field of
TESTING
Refer to the accompanying Scope of Accreditation for information regarding the types of
tests to which this accreditation applies.
AT-1144
Certificate Number
Certificate Valid: 09/16/2016-10/11/2018
Version No. 003
Issued: 09/16/2016
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005.
This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory
quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
gh Package & Product Testing and Consulting, Inc.
4090 Thunderbird Lane, Fairfield, OH 45014
Perry Hock Phone: 513-870-0080
TESTING
Valid to: October 11, 2018
Certificate Number: AT-1144
I. Mechanical
FIELD OF TEST
PARAMETER /
EQUIPMENT
EQUIPMENT
CAPABILITY 2
METHODS AND TEST
STANDARDS
Vibration / Shock Testing
Electro-Servo
Hydraulic Vibration
#1800-5 by
Lansmont Corp.
 Sine vibration
 Random vibration
(2 to 300) Hz Random
RMS
(2 to 200) Hz Sine
Weight capacity –
up to either
2 000 lb or 10 000 lb
(Depending on gforce level)
ASTM D4728, D4169, D3580, D999
ISTA 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J,
1K, 2A, 2B, 2C, 3A, 3B, 3C, 3D, 3E, 3F,
3G, 3H, 3J, 4AB, Series 5
Mil-Std 810
FED-Spec 101C
NMFTA Item 180, Item 181
Vibration / Shock Testing
Fixed Displacement
Vibration by L.A.B.
 Synchronous
motion
 Non-Sync
motion
 Vertical
Linear
motion
 30º Out-ofphase motion
Up to 8 000 lb at 1 in
displacement 100 rpm
to 300 rpm (per chart
from L.A.B.). Actual
rpm dependent on test
selection and
intensities.
ASTM D999, D4169
ISTA 1A,1B, 1C,1D, 1E, 1F, 1J, 1K, 2A,
2B, 2C, 4AB
NMFTA Item 180, Item 181
CFR 49-specific
IATA, ICAO, IMDG
Version 003
Issued: 09/16/2016
Page 1 of 4
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org
FIELD OF TEST
Vibration / Shock Testing
PARAMETER /
EQUIPMENT
EQUIPMENT
CAPABILITY 2
METHODS AND TEST
STANDARDS
Lansmont Shock Test
System
500 lb test mass
600 g’s bare table
(2 to 8) milliseconds
with Dual-Mass shock
amplifier
ASTM D4169, D5487, D3332, D6344
ISTA 1A,1B, 1C,1D, 1F, 1G, 1H, 2A, 2B,
2C, 3A, 3B, 4AB, Series 5
Vibration / Shock Testing
L.A.B. Inclined
Impact Tester
4 000 lb capacity
Maximum travel
velocity (unassisted)
-- 8 feet per second
Vibration / Shock Testing
L.A.B. Swing Arm
Drop Tester
10ft x 10ft drop pad
180 lb capacity
11 in minimum drop
height
108 in maximum drop
height
Vibration / Shock Testing
Gaynes Split Leaf
Drop Tester
10ft x 10ft drop pad
200 lb capacity
10 in minimum drop
height
72 in maximum drop
height
Vibration / Shock Testing
Quick Release:
L.A.B.
1 000 lb capacity
Vibration / Shock Testing
Quick Release:
Custom
8 000 lb capacity
Version 003
Issued: 09/16/2016
ASTM D880, D4169, D5277, D6055,
D6169, D6344
ISTA 1A, 1B, 1C, 1D, 1E, 1G, 1H, 1J, 1K,
2A, 2B, 2C, 3B, 3C, 3E, 3J, 4 AB& Series 5
Mil-Std 810
FED-Spec 101C
NMFTA Item 180, Item 181
ASTM D4169, D5276
ISTA 1A, 1B, 1C, 1D, 1F, 1G, 1H, 1J, 1K,
2A, 2B, 2C, 3A, 3B, 3C, 3D, 3F, 3G,
4AB & Series 5
Mil-Std 810, FED-Spec 101C
NMFTA Item 180, Item 181
CFR 49-specific
IATA, ICAO, IMDG
ASTM D4169, D5276
ISTA 1A, 1B, 1C, 1D, 1F, 1G, 1H, 1J, 1K,
2A, 2B, 2C, 3A, 3B, 3C, 3D, 3F, 3G,
4AB & Series 5,
Mil-Std 810, FED-Spec 101C
NMFTA Item 180, Item 181
CFR 49-specific
IATA, ICAO, IMDG
ASTM D6179, D5276
ISTA 1A, 1B, 1C, 1D, 1F, 1G, 1H, 1J, 1K,
2A, 2B, 2C, 3B, 3C, 3D, 3F, 3G, 4AB,
Series 5 Mil-Std 810
FED-Spec 101C
NMFTA Item 180, Item 181
CFR 49-specific
IATA, ICAO, IMDG
ASTM D6179, D5276
ISTA 1A, 1B, 1C, 1D, 1F, 1G, 1H, 1J, 1K,
2A, 2B, 2C, 3B, 3C, 3D, 3F, 3G, 4AB,
Series 5 Mil-Std 810
FED-Spec 101C
NMFTA Item 180, Item 181
CFR 49-specific
IATA, ICAO, IMDG
Page 2 of 4
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org
FIELD OF TEST
Vibration / Shock Testing
Temperature & Humidity
Testing
PARAMETER /
EQUIPMENT
EQUIPMENT
CAPABILITY 2
METHODS AND TEST
STANDARDS
Data Acquisition –
Test Partner 3 by
Lansmont
Up to 1 000 g’s
depending on the
accelerometer and
amplifier
Time (milliseconds)
can be scaled as
necessary up to 100
milliseconds
ASTM D1596, D3332, D4168, D5276,
D5487, D6537
Large Freezer
(unit 2)
(- 40 to 60) ºC
(- 40 to 140 ºF)
(72 x 84) in double
doors
ASTM D4332
ISTA 1A, 2A, 2B, 2C, 3A, 3B, 3C, 3E, 3F,
3G, 3H, 3J, 4AB & Series 5 and Std. 20-7E,
Mil-Std 810 FED-Spec 101C
CFR 49-specific
IATA, ICAO
Temperature & Humidity
Testing
Large Heat &
Humidity Chamber
(unit 3)
Temperature & Humidity
Testing
Stack Chamber (Heat,
Humidity or Cool)
(unit 7)
Temperature & Humidity
Testing
Temperature & Humidity
Testing
Temperature Testing
Version 003
Issued: 09/16/2016
(22 to 71) ºC
(72 to 160 ºF)
(10 to 95) %RH
depending on
temperature
(94 x 58) in door
(-29 to 82) ºC
(-20 to 180 ºF)
(10 to 95) %RH
depending on
temperature
(49 x 78) inch door
ASTM D4332
ISTA 1A, 2A, 2B, 2C, 3A, 3B, 3C, 3E, 3F,
3G, 3H, 3J, 4AB & Series 5 and Std. 20-7E,
Mil-Std 810, FED-Spec 101C
ASTM D4332;
ISTA 1A, 2A, 2B, 2C, 3A, 3B, 3C, 3E, 3F,
3G, 3H, 3J, 4AB & Series 5,
CFR 49-specific
IATA, ICAO
Small Freezer
(unit 4)
(-29 to 22) ºC
(-20 to 72) ºF
(26 x 78) inch door
ASTM D4332
ISTA 1A,1B, 1C,1D, 1E, 1F, 1J, 1K, 2A,
2B, 2C, 3A, 3B, 4AB and Std 20-7E
NMFTA Item 180 and Item 181
CFR 49-specific
IATA, ICAO, IMDG
Large Temperature
Chambers
(unit 14)
(-68 to 93) ºC
(-90 to 199) ºF
(0 to 95) %RH
depending on
temperature
(96 x 114) inch door
To ASTM D4332;
ISTA 1A, 2A, 2B, 2C, 3A, 3B, 3C, 3E, 3F,
3G, 3H, 3J, 4AB & Series 5,
CFR 49-specific
IATA, ICAO
(-31 to 93) ºC
(-25 to 200) ºF
ASTM D4332;
ISTA 1A, 2A, 2B, 2C, 3A, 3B, 3C, 3E, 3F,
3G, 3H, 3J, 4AB & Series 5 and Std. 20-7E,
CFR 49-specific
IATA, ICAO
Large Temperature
Chambers
Page 3 of 4
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org
FIELD OF TEST
Compression Testing
TAPPI Testing
TAPPI Testing
PARAMETER /
EQUIPMENT
EQUIPMENT
CAPABILITY 2
Emerson Apparatus
Compression Machine
(0 to 45 000) lb @
1 lb increments
(60 x 72) in platens,
expander platens
available
Compression Height:
112 in
Burst (Mullen) – B.F.
Perkins and Son
Chatillon Tensile
Compression*
METHODS AND TEST
STANDARDS
ASTM D4169, D1185
ISTA 1C, 1D, 1F, 2A, 2B, 2C, 3B, 3C, 3E,
3F, 3H, 3J & Series 5 and Std. 20-7E
CFR 49-specific
(0 to 250) psi doublewall, corrugated
TAPPI T810
CFR 49-specific
(0 to 1 000) lb
compression and
tensile
TAPPI T811, T472, T816, T839
ASTM D828, D642
ISTA 1C, 2A, 3C
1 lb increments
CFR 49-specific
TAPPI Testing
Caliper: TMI
(0 to 0.035) in
TAPPI T411
CFR 49-specific
TAPPI Testing
Scale: MettlerToledo*
Basis Weight
(0 to 200) g
maximum, measures
in grams or ounces
TAPPI T441, T410, ISO 535
CFR 49-specific
ASTM D685
Torque Testing
Secure Pak Torque
Tester
(0 to 50) in·lb @
2 in·lb per division
(0 to 6) Nm @
0.2 Nm per division
ASTM D3474, D3810, D3668
Hydrostatic Pressure
Testing
Pressure System
Vacuum System
Up to 50 psi
Down to (-30 in Hg)
CRF 49 § 178.605
Notes:
1.
2.
3.
Version 003
Asterisked “*” items indicate uncertainty values representing expanded uncertainties with a coverage factor of k=2 at a confidence
level of approximately 95% are available upon request.
References to “g’s” in capabilities represent gravitational force and not grams which is abbreviated “g”.
This scope is formatted as part of a single document including the Certificate of Accreditation No. AT-1144.
Issued: 09/16/2016
Page 4 of 4
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising