CN-USB2SATA-033 - cwin technology

CN-USB2SATA-033 - cwin technology
 CN-USB2SATA-033
Revision 1.0
Jun. 31, 2010
CWIN TECHNOLOGY INC.
Digital Signal Processing Division
Taipei. Taiwan. R.O.C.
Super Speed Product
Series
USB3.0 to 3.5” SATA HDD RAID System
General Description
Product Photo
The CN‐USB2SATA‐033 is a USB3.0 to SATA‐II bridge designed for external storage device. CN‐USB2SATA‐033 is fully complies with all SATA interface mass storage device. CN‐USB2SATA‐033 has provide USB3.0 work on the Super Speed operations with signal rate reaching 5 Gbits/s, over 10 times the bit rate of High‐ Speed USB2.0. In addition, fully support USB3.0 data bursting, flow control, dual simplex transfers and command queuing to increase the data transfer performance. Product Feature
1. Supports USB Super‐Speed/High‐Speed/Full‐Speed 2. Supports Serial ATA Gen2i/Gen2m 3. Support SATA II Asynchronous Signal Recovery (Hot Plug) feature 4. Supports USB HID operation 5. Supports USB power saving mode 6. Supports AES‐128/256 for data encryption over USB2.0&3.0 7. Support for ECB,CBC,XTS and IEEE1667 password silos 8. Support USB3.0 UASP (USB Attached SCSI Protocol) function 9. Provide Data transfer activity LED indicator 10. Provide System Power LED indicator 11. Support PC power sleep mode LED indicator 12. Support Super‐Speed detect LED indicator 13. Support Hardware USB safe remove button 14. Support Normal,RAID0,RAID1 & JBOD function Product Application
 USB 2.0/3.0 to 2x external 3.5”HDD  USB 2.0/3.0 to RAID System  USB 2.0/3.0 Data Backup System Page 2 / 6 www.cwintech.com.tw Super Speed Product
Series
USB3.0 to 3.5” SATA HDD RAID System
Testing Performance Report
Test environment 1. Windows BOT Driver 2. Intel X‐25E SSD 3. Windows 7 4. CrystalDiskMark2.2 5. NEC USB3.0 host Card with 3021 firmware/ 1.0.18.0 driver Test environment 1. Windows BOT Driver 2. Intel X‐25E SSD 3. Windows XP 4. CrystalDiskMark2.2 5. NEC USB3.0 host Card with 3021 firmware/ 1.0.18.0 driver Page 3 / 6 www.cwintech.com.tw Super Speed Product
Series
USB3.0 to 3.5” SATA HDD RAID System
Testing Performance Report
Test environment 1. GA‐6FXSV Motherboard 2. Intel SSDSA2SH032G1GN 3. Windows 7 4. CrystalDiskMark2.2 5. NEC USB3.0 host Card with 3021 firmware/ 1.0.18.0 driver Page 4 / 6 www.cwintech.com.tw Super Speed Product
Series
USB3.0 to 3.5” SATA HDD RAID System
Product Package
CN-USB2SATA-033
X 1 12V/ 3A Switching DC ADAPTER
X 1 User Manual
X 1 Application CD
X 1 Product Specification
Support Formats
I/O Port
Input: 1 X USB3.0/USB2.0 Cable Type A Connector Output: 2 X SATA‐II Accessories
AC to DC Power Adapter 2x 3.5” HDD storage box Body Dimensions
61.5 x 62.5 x 35.5mm (W x D x H) Weight
90g Power
Power Source: 12V DC 3A 36W Power Adapter Power Consumption: < 20W Operating Temperature: 5 ‐ 70°C Page 5 / 6 www.cwintech.com.tw Super Speed Product
Series
USB3.0 to 3.5” SATA HDD RAID System
Product Installation Application
Other Products
CN‐USB2SATA‐00 2.5”HDD 3.5”HDD 3.5”HDD SSD CN‐USB2SATA‐033 USB3.0 to SATA for 2.5”HDD/SSD Use only CN‐USB2SATA‐01 USB3.0 to SATA for 2.5”&3.5”&SSD Use (Standard version) CN‐USB2SATA‐02 USB3.0 to SATA for 2.5”&3.5”&SSD Use (Pro version) CN‐USB2SATA‐032 USB3.0 to 2x SATA for 2.5” HDD RAD system Use CN‐USB2SATA‐033 USB3.0 to 2x SATA for 3.5” HDD RAD system Use Page 6 / 6 www.cwintech.com.tw 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising