LANCOM L-322E Wireless

LANCOM L-322E Wireless
Wireless LAN
LANCOM L-322E Wireless
Dual-radio enterprise-class 11n WLAN access point with up to 300 Mbps,
Wireless ePaper technology and iBeacon support
The LANCOM L-322E Wireless is a powerful 11n WLAN enterprise-class access point. It simultaneously provides
11n clients with professional and reliable WLAN in the 2.4-GHz and 5-GHz band with optimized network load.
In addition to that, the access point supports the wireless update of radio-controlled, battery-powered ePaper
displays and iBeacon technology in an interference-free, parallel operation.
a Dual concurrent WLAN – parallel operation at 2.4 and 5 GHz with up to 300 Mbps with IEEE 802.11a/g/n
a Integrated radio module for updating LANCOM Wireless ePaper Displays
a Integrated iBeacon technology
a Dynamic WLAN optimization thanks to LANCOM Active Radio Control (ARC)
a Powerful WLAN diagnostics with Spectral Scan
a Professional security features such as IEEE 802.1X
a Operation via LANCOM Management Cloud, WLAN controller or stand-alone
a Easy and secure integration of external users with the Public Spot Option
DATASHEET
LANCOM L-322E Wireless
Dual concurrent Wi-Fi with up to 300 Mbps
Powerful WLAN diagnostics with Spectral Scan
The LANCOM L-322E Wireless is a powerful 11n WLAN
The LANCOM L-322E Wireless uses Spectral Scan to search
enterprise-class access point. It provides 11n clients
the surrounding radio field for sources of interference. This
simultaneously in the 2.4-GHz frequency band and 5-GHz
professional tool for efficient WLAN troubleshooting is a
band with 300 Mbps WLAN.
combination of hardware and software features. It identifies
and graphically represents sources of interference, so helping
Update of LANCOM Wireless ePaper Displays
the administrator to initiate countermeasures.
Besides providing two WLAN radio modules, the LANCOM
L-322E Wireless also offers one radio module for the update
LANCOM security for wireless networks
of LANCOM Wireless ePaper Displays. Thanks to the
With numerous integrated security features, such as IEEE
intelligent combination of different radio technologies in one
802.1X, the LANCOM L-322E Wireless provides optimal
access point, the interference-free and parallel operation is
security for networks. As a result, employees and visitors all
guaranteed.
benefit from security policies in the network.
Integrated iBeacon technology
Zero-touch deployment
The iBeacon, integrated in the LANCOM L-322E Wireless,
The LANCOM L-322E Wireless can be versatilely operated:
continously sends signals via the radio standard Bluetooth
Managed via the LANCOM Management Cloud it is
Low Energy (version 4.0). It is extremely well-suited for
integrated into a comprehensive, automated network
near-field communication and has the advantage that its
orchestration, based on Software-defined Networking
power consumption is significantly lower compared to classic
technology. It can also be operated via a LANCOM WLAN
Bluetooth - an innovative method for various push marketing
controller or be applied in stand-alone operation.
actions.
Secure integration of external users
Active Radio Control for dynamic radio-field
In combination with the LANCOM Public Spot Option, the
optimization
LANCOM L-322E Wireless is ideal for operating hotspots.
The LANCOM L-322E Wireless supports the WLAN
Users benefits from a hotspot that is secure and easy-to-use,
optimization concept LANCOM Active Radio Control. This
while hotspot operators can be sure that their own network
intelligent combination of innovative features included with
remains separate from the hotspot.
the LCOS operating system – such as Band Steering, Adaptive
Noise Immunity, Adaptive RF Optimization, Airtime Fariness
Maximum future viability
and Client Steering – sustainably increases WLAN
LANCOM products are designed for a service life of several
performance and supports administrators with professional
years and are equipped with hardware dimensioned for the
tools for WLAN management.
future. Even reaching back to older product generations,
updates to the LANCOM Operating System – LCOS – are
available several times a year, free of charge and offering
major features.
DATASHEET
LANCOM L-322E Wireless
LCOS 10.00
WLAN product specifications
Frequency band 2.4 GHz and 5 GHz
2400-2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions)
Integrated Antenna Gain (per antenna (2)) up to 3 dBi in 2.4 GHz, up to 4.5 dBi in 5 GHz
Data rates IEEE 802.11n
300 Mbps according to IEEE 802.11n with MCS15 (fallback to 6,5 Mbps with MCS0). Compatible to IEEE 802.11a/n, IEEE 802.11g/n,
IEEE 802.11b/g/n or IEEE 802.11b/g compatibility mode or pure IEEE 802.11n, pure IEEE 802.11a, IEEE 802.11g or pure IEEE 802.11b
mode and data rates selectable
Data rates IEEE 802.11a/ h
54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output)
and DFS (automatic channel selection, radar detection) and data rates selectable
Data rates IEEE 802.11b/g
54 Mbps to IEEE 802.11g (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5,
2, 1 Mbps, Automatic Rate Selection), IEEE 802.11b/g compatibility mode or pure IEEE 802.11g or pure IEEE 802.11b and data rates
selectable
Range IEEE 802.11a/b/g *
Up to 150 m (up to 30 m in buildings)
Output power at radio module, 5 GHz
IEEE 802.11a/h: +17 up to +18 dBm @ 6 up to 48 Mbps, +13 up to +15 dBm @ 54 Mbps, IEEE 802.11n: +17 up to +18 dBm @
(MCS0/8, 20 MHz), +11 up to +13 dBm @ (MCS7/15, 20 MHz), +16 up to +17 dBm @ (MCS0/8, 40 MHz), +9 up to +12 dBm @
(MCS7/15, 40 MHz)
Output power at radio module, 2.4 GHz
IEEE 802.11b: +22 dBm @ 1 and 2 Mbps, +22 dBm @ 5,5 and 11 Mbps, IEEE 802.11g: +22 dBm @ 6 up to 36 Mbps, +20 dBm @ 48
Mbps, +18 dBm @ 54 Mbps, IEEE 802.11n: +22 dBm @ (MCS0/8, 20 MHz), +16 dBm @ (MCS7/15, 20 MHz), +21 dBm @ (MCS0/8,
40 MHz), +15 dBm @ (MCS7/15, 40 MHz)
Max. allowed radiation power (EIRP), 5 GHz IEEE 802.11a/h: Up to 30 dBm / 1000 mW EIRP (depending on national regulations on channel usage and subject to further obligations
such as TPC and DFS)
Max. allowed radiation power (EIRP), 2.4
GHz
IEEE 802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)
Minimum transmission power
Transmission power reduction in software in 1 dB steps to min. 0.5 dBm
Receiver sensitivity 5 GHz
IEEE 802.11a/h: -98 dBm @ 6 Mbps, -81 dBm @ 54 Mbps, IEEE 802.11n: -94 dBm @ (MCS0, 20 MHz), -76dBm @ (MCS 7, 20 MHz),
-92 dBm @ (MCS0, 40 MHz), -72 dBm @ (MCS7, 40 MHz)
Receiver sensitivity 2.4 GHz
IEEE 802.11b: -97 dBm @ 1 MBit/s, -93 dBm @ 11 MBit/s, IEEE 802.11g: -95dBm @ 6 MBit/s, -81dBm @ 54 MBit/s IEEE 802.11n: -94
dBm @ 6,5MBit/s (MCS0, 20 MHz), -77 dBm @ 65 MBit/s (MCS7, 20 MHz), -91 dBm @ 15 MBit/s (MCS0, 40 MHz), -74 dBm @ 150
MBit/s (MCS7, 40 MHz)
Radio channels 5 GHz
Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection
depending on national regulations)
Radio channels 2.4 GHz
Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)
Multi-SSID
Up to 32 independent WLAN networks
Concurrent WLAN clients
Up to 65 clients (recommended), 512 clients (max.)
*) Note
The effective distances and transmission rates that can be achieved are depending of the onsite RF conditions
Supported WLAN standards
IEEE standards
IEEE 802.11n, IEEE 802.11a, IEEE 802.11g, IEEE 802.11b, IEEE 802.11i, IEEE 802.1X, IEEE 802.11u, IEEE 802.11r (Fast Roaming), IEEE
802.11w (Protectet Management Frames), WME and U-APSD/WMM Power Save as defined in IEEE 802.11e, IEEE 802.11h, IEEE
802.11d
Standard IEEE 802.11n
Supported features
2x2 MIMO, 40 MHz channel, 20/40MHz coexistence mechanisms in the 2.4 GHz band, MAC aggregation, Block Acknowledgement,
STBC (Space Time Block Coding), LDPC (Low Density Parity Check), MRC (Maximal Ratio Combining), Short Guard Interval
WLAN operating modes
Modes
WLAN access point (standalone, WLC or LANCOM Management Cloud managed), WLAN bridge (P2P or P2MP) (standalone or AutoWDS*),
(standalone, WLC or LANCOM Management Cloud managed), WLAN client mode, transparent WLAN client mode
*) Note
Only in installations with WLAN controller
Security
Encryption options
IEEE 802.1X (WPA2-Enterprise), IEEE 802.11i (WPA2-Personal), Wi-Fi Certified™ WPA2™, WPA, WEP, IEEE 802.11w (Protected
Management Frames), LEPS (LANCOM Enhanced Passphrase Security)
DATASHEET
LANCOM L-322E Wireless
LCOS 10.00
Security
Encryption
AES:CCMP (Advanced Encryption Standard with Counter Mode and Cipher Block Chaining Message Authentication Code Protocol),
TKIP (Temporal Key Integrity Protocol), RC4 (only used by WEP)
EAP types (authenticator)
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FAST
RADIUS/EAP-server
User administration MAC-based, rate limiting, passphrases, VLAN user based, authentication of IEEE 802.1X clients via EAP-TLS,
EAP-TTLS, EAP-MD5, EAP-GTC, PEAP, MSCHAP or MSCHAPv2
Others
WLAN protocol filters, IP-redirection of any packet received over the WLAN interface, IEEE 802.1X supplicant, background scanning,
client detection ("rogue WLAN client detection"), Wireless Intrusion Detection System (WIDS), RADIUS CoA (Change of Authorization)
LANCOM Active Radio Control
Client Steering*
Steering of WLAN clients to the ideal access point
Band Steering
Steering of 5GHz clients to the corresponding high-performance frequency band
Managed RF Optimization*
Selection of optimal WLAN channels by the administrator
Adaptive Noise Immunity
Better WLAN throughput due to immunity against interferences
Spectral Scan
Monitoring your WLAN for sources of interference
Adaptive RF Optimization
Dynamic selection of the optimal WLAN channel
Airtime Fairness
Improved utilization of the WLAN bandwidth
Adaptive Transmission Power
Automatic adjustment of the transmission power for Wi - Fi backup scenarios
*) Note
Only in installations with WLAN controller
Roaming
Roaming
IAPP (Inter Access Point Protocol), IEEE 802.11r (Fast Roaming), OKC (Opportunistic Key Caching), Fast Client Roaming (only in operating
mode client modus)
Wireless ePaper Displays
Support of LANCOM Wireless ePaper
Displays
The device is equipped with a radio module for the update of LANCOM Wireless ePaper Displays in the 2.4 GHz frequency band.
iBeacon
Support of iBeacon technology
The device is equipped with a BLE radio module and can thus transmit a configurable iBeacon. The UUID as well as the major and
minor ID are configurable. On top of that, all three radiated powers are supported (near, immediate, far).
Layer 2 features
VLAN
4.096 IDs based on IEEE 802.1q, dynamic assignment, Q-in-Q tagging
Quality of Service
WME based on IEEE 802.11e, Wi-Fi Certified™ WMM®
Rate limiting
SSID based, WLAN client based
Multicast
IGMP-Snooping
Protocols
Ethernet over GRE-Tunnel (EoGRE), ARP-Lookup, LLDP, DHCP option 82, IPv6-Router-Advertisement-Snooping, DHCPv6-Snooping,
LDRA (Lightweight DHCPv6 Relay Agent), Spanning Tree, Rapid Spanning Tree, ARP, Proxy ARP, BOOTP, DHCP
Layer 3 features
Firewall
Stateful inspection firewall including paket filtering, extended port forwarding, N:N IP address mapping, paket tagging, user-defined
rules and notifications
Quality of Service
Traffic shaping, bandwidth reservation, DiffServ/TOS, packetsize control, layer-2-in-layer-3 tagging
Security
Intrusion Prevention, IP spoofing, access control lists, Denial of Service protection, detailed settings for handling reassembly,
session-recovery, PING, stealth mode and AUTH port, URL blocker, password protection, programmable reset button
PPP authentication mechanisms
PAP, CHAP, MS-CHAP, and MS-CHAPv2
High availability / redundancy
VRRP (Virtual Router Redundancy Protocol), analog/GSM modem backup
Router
IPv4-, IPv6-, NetBIOS/IP multiprotokoll router, IPv4/IPv6 dual stack
Router virtualization
ARF (Advanced Routing and Forwarding) up to separate processing of 16 contexts
DATASHEET
LANCOM L-322E Wireless
LCOS 10.00
Layer 3 features
IPv4 services
HTTP and HTTPS server for configuration by web interface, DNS client, DNS server, DNS relay, DNS proxy, dynamic DNS client, DHCP
client, DHCP relay and DHCP server including autodetection, NetBIOS/IP proxy, NTP client, SNTP server, policy-based routing,
Bonjour-Proxy
IPv6 services
HTTP and HTTPS server for configuration by web interface, DHCPv6 client, DHCPv6 server, DHCPv6 relay, DNS client, DNS server,
dynamic DNS client, NTP client, SNTP server, Bonjour-Proxy
IPv6 compatible LCOS applications
WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, firewall, RAS dial-in
Dynamic routing protocol
RIPv2
IPv4 protocols
DNS, HTTP, HTTPS, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RADSEC (secure RADIUS), RTP, SNMPv1,v2c,v3, TFTP, TACACS+
IPv6 protocols
NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (DHCPv6), router advertisements, ICMPv6,
DHCPv6, DNS, HTTP, HTTPS, PPPoE, RADIUS, SMTP, NTP, Syslog, SNMPv1,v2c,v3
WAN operating mode
VDSL, ADSL1, ADSL2 or ADSL2+ additional with external DSL modem at an ETH port
WAN protocols
PPPoE, Multi-PPPoE, ML-PPP, GRE, EoGRE, PPTP (PAC or PNS), L2TPv2 (LAC or LNS) and IPoE (using DHCP or no DHCP), RIP-1, RIP-2,
VLAN, IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IP(v6)oE (autokonfiguration, DHCPv6 or static)
Tunneling protocols (IPv4/IPv6)
6to4, 6in4, 6rd (static and over DHCP), Dual Stack Lite (IPv4-in-IPv6-Tunnel)
Interfaces
Ethernet port
1 x 10/100/1000BASE-T autosensing (RJ-45), PoE (Power over Ethernet)
Ethernet port
1 x 10/100BASE-T autosensing (RJ-45), PoE (Power over Ethernet)
Serial interface
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS
modems. Supports internal COM port server and allows for transparent asynchronous transmission of serial data via TCP
External antenna connectors
Two reverse SMA connectors for external antennas can be used to control Wireless ePaper Displays and iBeacon as well as two reverse
SMA connectors for external LANCOM AirLancer Extender antennas or for antennas from other vendors. Please respect the restrictions
which apply in your country when setting up an antenna system. For information about calculating the correct WLAN antenna setup,
please refer to www.lancom-systems.eu
Internal antenna
Radio module uses two internal antennas (WLAN-1).
Hardware
Power supply
12 V DC, external power adapter (230 V) with bayonet cap. PoE (Power over Ethernet), compliant with IEEE 802.3af
Environment
Temperature range 0° to +45°C; humidity up to 95%; non-condensing
Power consumption (max)
Approx. 7 watt with 12 V/ 1,5 A power supply adapter (total power consumption of access point and power supply adapter), approx.
8.5 watt via PoE
Housing
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)
Management and monitoring
Management
LANCOM Management Cloud, LANconfig, WEBconfig, WLAN controller, LANCOM Layer 2 management (emergency management)
Management functions
Alternative boot configuration, voluntary automatic updates for LCMS and LCOS, individual access and function rights up to 16
administrators, RADIUS and RADSEC user management, remote access (WAN or (W)LAN, access rights (read/write) adjustable seperately),
SSL, SSH, HTTPS, Telnet, TFTP, SNMP, HTTP, access rights via TACACS+, scripting, timed control of all parameters and actions through
cron job
FirmSafe
Two stored firmware versions, incl. test mode for firmware updates
Monitoring
LANCOM Management Cloud, LANmonitor, WLANmonitor
Monitoring functions
Device SYSLOG, SNMPv1,v2c,v3 incl. SNMP-TRAPS, extensive LOG and TRACE options, PING and TRACEROUTE for checking connections,
internal logging buffer for firewall events
Monitoring statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter, accounting information exportable via LANmonitor and SYSLOG
iPerf
iPerf is a tool for measurements of the bandwidth on IP networks (integrated client and server)
SLA-Monitor (ICMP)
Performance monitoring of connections
SD-WLAN
SD-WLAN – automatic WLAN configuration via the LANCOM Management Cloud
DATASHEET
LANCOM L-322E Wireless
LCOS 10.00
Management and monitoring
SD-LAN
SD-LAN – automatic LAN configuration via the LANCOM Management Cloud
Declarations of conformity*
CE
EN 60950-1, EN 301 489-1, EN 301 489-17
Wi-Fi Alliance Certification
Wi-Fi Certified
5 GHz WLAN
EN 301 893
2.4 GHz WLAN
EN 300 328
IPv6
IPv6 Ready Gold
Country of Origin
Made in Germany
*) Note
You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu
Scope of delivery
Manual
Installation Guide (DE/EN/FR/ES/IT/PT/NL)
CD/DVD
Data medium with management software (LANconfig, LANmonitor, WLANmonitor, LANCAPI) and documentation
Cable
1 Ethernet cable, 3 m
Antenna
Four 3 dBi dipole dual-band antennas
Power supply unit
External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from -5 to
+45° C, LANCOM item no. 111301 (EU)/LANCOM item no 110829 (UK) (not included in bulk delivery)
Support
Warranty
3 years support via hotline and Internet KnowledgeBase
Software updates
Regular free updates (LCOS operating system and LANtools) via Internet
Options
LANCOM Warranty Basic Option S
Option to extend the manufacturer´s warranty from 3 to 5 years, item no. 10710
LANCOM Warranty Advanced Option S
Option to extend the manufacturer´s warranty from 3 to 5 years and replacement of a defective device, item no. 10715
LANCOM Public Spot
Hotspot option for LANCOM access points and the LANCOM 17xx series for user authentication (up to 64), versatile access (via voucher,
e-mail, SMS), including a comfortable setup wizard, secure separation of guest access and internal network, item no. 60642
LANCOM Management Cloud
LANCOM LMC-A-1Y LMC License
LANCOM LMC-A-1Y License (1 Year), enables the management of one category A device for one year via the LANCOM Management
Cloud, item no. 50100
LANCOM LMC-A-3Y LMC License
LANCOM LMC-A-3Y License (3 Years), enables the management of one category A device for three years via the LANCOM Management
Cloud, item no. 50101
Accessories
LANCOM Wireless ePaper Displays
2.7" LANCOM Wireless ePaper Display, item no. 62213 (bulk 5), 4.4" LANCOM Wireless ePaper Display, item no. 62211 and item no.
62214 (bulk 5), 7.4" LANCOM Wireless ePaper Display, item no. 62212 and item no. 62215 (bulk 5)
LANCOM WLAN controllers
LANCOM WLC-4006+, item no. 62035 (EU), item no. 62036 (UK) and item no. 62037 (US), LANCOM WLC-4025+, item no. 61378,
item no. 61379 and item no. 61384 (US), LANCOM WLC-4100, item no. 61369 (EU) and item no. 61377 (UK), LANCOM WLC Basic
Option for Routers, item no. 61639
External antenna, indoor use
AirLancer IN-T180ag, item no. 61245
LANCOM Wall Mount
For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61349
LANCOM Wall Mount (White)
For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61345
LANCOM Serial Adapter Kit
For the connection of V.24 modems with AT command set and serial interface for the connection to the LANCOM COM interface, incl.
serial cable and connection plug, item no. 61500
Power over Ethernet Injector
1-port PoE injector with Gigabit support, integrated power supply, compatible with the standard IEEE 802.3af/at, item no. 61738 (EU)
and 61739 (UK)
DATASHEET
LANCOM L-322E Wireless
LCOS 10.00
LANCOM L-322E Wireless (EU,UK)
61576 (EU), 61582 (UK)
LANCOM L-322E Wireless 10-piece bulk
61586
Gehäusezeichnung
www.lancom-systems.com
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail info@lancom-systems.com
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for
technical errors and/or omissions. 04/17
Item number(s)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising