Cisco Nexus 9300-EX and 9300-FX Platform Leaf Switches for

Cisco Nexus 9300-EX and 9300-FX Platform Leaf Switches for
Data Sheet
Cisco Nexus 9300-EX and 9300-FX Platform Leaf
Switches for Cisco Application Centric
Infrastructure
Product Overview
The Cisco® Application Centric Infrastructure (Cisco ACI™) solution in the data center is a holistic architecture with
centralized automation and policy-based application profiles. The Cisco ACI solution provides a robust transport
network for today’s dynamic workloads. Cisco ACI is built on a network fabric that combines time-tested protocols
with new innovations to create a highly flexible, scalable, and resilient architecture of low-latency, high-bandwidth
links. This fabric delivers a network that can support the most demanding and flexible data center environments.
The Cisco ACI fabric consists of three major components:
●
Cisco Application Policy Infrastructure Controller (APIC)
●
Spine switches
●
Leaf switches
Building on the success of first-generation Cisco Nexus® 9300 platform switches, the latest Cisco Nexus 9300-EX
™
and 9300-FX platforms can collect comprehensive Cisco Tetration Analytics telemetry information at line rate
across all ports without adding any latency to the packets or negatively affecting switch performance. This
telemetry information is exported every 100 milliseconds (ms) by default directly from the switch’s
Application-Specific Integrated Circuit (ASIC). This information consists of three types of data:
●
Flow information: This information contains information about endpoints, protocols, ports, when the flow
started, how long the flow was active, etc.
●
Interpacket variation: This information captures any interpacket variations within the flow. Examples
include variation in Time To Live (TTL), IP and TCP flags, payload length, etc.
●
Context details: Context information is derived outside the packet header, including variation in buffer
utilization, packet drops within a flow, association with tunnel endpoints, etc.
The Cisco Tetration Analytics platform consumes this telemetry data, and by using unsupervised machine learning
and behavior analysis it can provide outstanding pervasive visibility across everything in your data center in real
time. By using algorithmic approaches, the Cisco Tetration Analytics platform provides deep insights into
applications and interactions, enabling dramatically simplified operations, a zero-trust model, and migration of
applications to any programmable infrastructure. To learn more, go to https://www.cisco.com/go/tetration.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 10
These Layer 2 and 3 nonblocking switches support 1, 10, 25, 40, 50 and 100 Gigabit Ethernet; Fibre Channel over
Ethernet (FCoE)1; and 8-, 16-, and 32-Gbps Fibre Channel1 (native Fibre Channel support is available on 9300-FX
Small Form-Factor Pluggable (SFP) models only), with up to 3.6 Terabits per second (Tbps) of internal bandwidth.
In addition, the 9300-FX switches support the IEEE 802.1ae MAC Security (MACsec) standard on all downlink and
uplink ports, allowing traffic encryption at the physical layer and providing secure server, border leaf, and leaf-tospine connectivity.
Models
Table 1 lists the Cisco Nexus 9300-EX platform switches that support the Cisco ACI solution.
Table 1.
Cisco Nexus 9300-EX Platform Leaf Switches for Cisco ACI Solution
Model
Description
Cisco Nexus 93180YC-EX
48 x 10/25-Gbps fiber ports and 6 x 40/100-Gbps Quad SFP (QSFP28) ports
Cisco Nexus 93108TC-EX
48 x 10GBASE-T ports and 6 x 40/100-Gbps QSFP28 ports
Cisco Nexus 93180LC-EX
24 x 40/50-Gbps Enhanced QSFP (QSFP+) ports and 6 x 40/100-Gbps QSFP28 ports
The Cisco Nexus 93180YC-EX Switch (Figure 1) is a 1-Rack-Unit (1RU) switch with latency of less than 1
microsecond that supports 3.6 Tbps of bandwidth and over 2.6 billion packets per second (bpps). The 48 downlink
ports on the 93180YC-EX can be configured to work as 1-, 10-, or 25-Gbps ports, offering deployment flexibility
and investment protection. The 6 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible
migration options. All ports support FCoE.
Figure 1.
Cisco Nexus 93180YC-EX Switch
The Cisco Nexus 93108TC-EX Switch (Figure 2) is a 1RU switch that supports 2.16 Tbps of bandwidth and over
1.5 bpps. The 48 10GBASE-T downlink ports on the 93108TC-EX can be configured to work as 100-Mbps,
1-Gbps, or 10-Gbps ports. The 6 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible
migration options. With 1/10GBASE-T support, the platform can deliver 10 Gigabit Ethernet over existing copper
wire, enabling a low-cost upgrade from Cisco Catalyst 6500 Series Switches when the switch is used in a
Middle-of-Rack (MoR) or End-of-Row (EoR) configuration.
Figure 2.
1
Cisco Nexus 93108TC-EX Switch
Check software release notes for the latest support.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 10
The Cisco Nexus 93180LC-EX Switch is the industry’s first 50-Gbps capable 1RU switch that supports 3.6 Tbps of
bandwidth and over 2.6 bpps across 24 fixed 40/50-Gbps QSFP+ ports and 6 fixed 40/100G-Gbps QSFP28 ports.
Ports numbered 26 and 28 are disabled and 25, 27, 29, 30, 31, and 32 are the 6 uplinks ports, which can be
configured as 40- and 100-Gbps ports, offering flexible migration options (Figure 3). This switch is capable of
supporting flexible port configurations.2
Figure 3.
Cisco Nexus 93180LC-EX Switch
Table 2 lists the Cisco Nexus 9300-FX platform switches that support the Cisco ACI solution.
Table 2.
Cisco Nexus 9300-FX Platform Leaf Switches for Cisco ACI Solution
Model
Description
Cisco Nexus 93180YC-FX
48 x 10/25-Gbps fiber ports and 6 x 40/100-Gbps QSFP28 ports
Cisco Nexus 93108TC-FX
48 x 10GBASE-T ports and 6 x 40/100-Gbps QSFP28 ports
Cisco Nexus 9348GC-FXP
48 x 100M/1G BASE-T ports, 4 x 1/10/25-Gbps SFP28 ports and 2 x 40/100-Gbps QSFP28 ports
The Cisco Nexus 93180YC-FX Switch (Figure 4) is a 1RU switch with latency of less than 1 microsecond that
supports 3.6 Tbps of bandwidth. The 48 downlink ports on the 93180YC-FX can be configured to work as 1-, 10-,
or 25-Gbps Ethernet or FCoE ports or as 8-, 16-, 32-Gbps Fibre Channel ports, converging primary storage and
compute servers, back-end storage, and policy-based switching on the leaf node. The 6 uplinks ports can be
configured as 40- and 100-Gbps Ethernet or FCoE ports, offering flexible migration options. All ports support wirerate MACsec encryption.
Figure 4.
Cisco Nexus 93180YC-FX Switch
The Cisco Nexus 93108TC-FX Switch (Figure 5) is a 1RU switch that supports 2.16 Tbps of bandwidth and over
1.5 bpps. The 48 10GBASE-T downlink ports on the 93108TC-FX can be configured to work as 100-Mbps, 1-Gbps,
or 10-Gbps ports. The 6 uplinks ports can be configured as 40- and 100-Gbps Ethernet or FCoE ports, offering
flexible migration options. With 1/10GBASE-T support, the platform can deliver 10 Gigabit Ethernet over existing
copper wire, enabling a low-cost upgrade from Cisco Catalyst 6500 Series Switches when the switch is used in a
MoR or EoR configuration. All ports support wire-rate MACsec encryption.
Figure 5.
2
Cisco Nexus 93108TC-FX Switch
Capabilities to enable templates for different port configurations are on the software roadmap.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
The Cisco Nexus 9348GC-FXP Switch (Figure 6) is a 1RU switch that supports 696 Gbps of bandwidth and over
250 mpps. The 48 1GBASE-T downlink ports on the 9348GC-FXP can be configured to work as 100-Mbps, 1-Gbps
ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the 2 ports of QSFP28 can be configured as
40- and 100-Gbps ports. The Cisco Nexus 9348GC-FXP is ideal for big data customers that require a Gigabit
Ethernet ToR switch with local switching.
Figure 6.
Cisco Nexus 9348GC-FXP Switch
Features and Benefits
The Cisco Nexus 9300 platform switches are high-density, nonblocking, low-power switches designed to work well
in leaf-and-spine deployment in enterprise data centers, service provider facilities, and large virtualized and cloud
computing environments.
The platform offers industry-leading density, performance, and capabilities with flexible port configurations that can
support existing copper and fiber cabling (Tables 3 and 4). Please consult the Cisco ACI release notes and
scalability guides for a detailed description of the differences between the 9300–EX and 9300-FX platforms.
Table 3.
Specifications for Cisco Nexus 9300 EX Platform Leaf Switches for Cisco ACI Solution
Feature
Cisco Nexus 93180YC-EX
Cisco Nexus 93108TC-EX
Cisco Nexus 93180LC-EX
Ports
48 x 10/25-Gbps and 6 x 40/100-Gbps
QSFP28 ports
48 x 10GBASE-T and 6 x 40/100Gbps QSFP28 ports
24 x 40/50-Gbps and 6 x 40/100Gbps QSFP28 ports
Downlink supported
speeds
1/10/25-Gbps speeds
100-Mbps and 1/10-Gbps speeds
40/50-Gbps speeds
CPU
4 cores
4 cores
4 cores
System memory
24 GB
24 GB
24 GB
SSD drive
64 GB
64 GB
64 GB
System buffer
40 MB
40 MB
40 MB
Management ports
2 ports: 1 RJ-45 and 1 SFP+
2 ports: 1 RJ-45 and 1 SFP+
2 ports: 1 RJ-45 and 1 SFP+
USB ports
1
1
1
RS-232 serial ports
1
1
1
Power supplies (up to 2)
650 watts (W) AC, 930W DC, or 1200W
HVAC/HVDC
650W AC, 930W DC, or 1200W
HVAC/HVDC
500W AC, 930W DC, or 1200W
HVAC/HVDC
Typical power* (AC/DC)
210W
290W
220W
Maximum power (AC/DC)
470W
499W
500W
Input voltage (AC)
100 to 240V
100 to 240V
100 to 240V
Input voltage (highvoltage AC [HVAC])
200 to 277V
200 to 277V
200 to 277V
Input voltage (DC)
–48 to –60V
–48 to –60V
–48 to –60V
Input voltage (highvoltage DC [HVDC])
–240 to –380V
–240 to –380V
–240 to –380V
Frequency (AC)
50 to 60 Hz
50 to 60 Hz
50 to 60 Hz
Fans
4
4
4
*
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
*
Feature
Cisco Nexus 93180YC-EX
Cisco Nexus 93108TC-EX
Cisco Nexus 93180LC-EX
Airflow
Port-side intake and exhaust
Port-side intake and exhaust
Port-side intake and exhaust
Physical dimensions
(H x W x D)
1.72 x 17.3 x 22.5 in.
(4.4 x 43.9 x 57.1 cm)
1.72 x 17.3 x 22.5 in.
(4.4 x 43.9 x 57.1 cm)
1.72 x 17.3 x 22.5 in.
(4.4 x 43.9 x 57.1 cm)
Acoustics
48.5 dBA at 40% fan speed, 64.9 dBA
48.6 dBA at 40% fan speed, 65.2 dBA
at 70% fan speed, and 77.8 dB at 100% at 70% fan speed, and 76.5 dB at
fan speed
100% fan speed
49.9 dBA at 50% fan speed, 66
dBA at 70% fan speed, and 73.9
dB at 100% fan speed
RoHS compliance
Yes
Yes
Yes
MTBF
390,330 hours
366,130 hours
323,440 hours
Typical and maximum power values are based on input drawn from the power circuit. The power supply value (for example,
650W AC power supply: NXA-PAC-650W-PI) is based on the output rating to the inside of the switch.
Table 4.
Specifications for Cisco Nexus 9300 FX Platform Leaf Switches for Cisco ACI Solution
Feature
Cisco Nexus 93180YC-FX
Cisco Nexus 93108TC-FX
Cisco Nexus 9348GC-FXP
Ports
48 x 10/25-Gbps and 6 x 40/100Gbps QSFP28 ports
48 x 10GBASE-T and 6 x 40/100Gbps QSFP28 ports
48 x 1-GBASE-T ports, 4 x 1/10/25Gbps SFP28 ports and 2 x 40/100
QSFP28 ports
Downlink supported speeds
1/10/25-Gbps Ethernet
100-Mbps and 1/10-Gbps speeds
100-Mbps and 1-Gbps speeds
8/16/32-Gbps Fibre Channel
CPU
6 cores
4 cores
4 cores
System memory
64 GB
24 GB
24 GB
SSD drive
128 GB
128 GB
128 GB
System buffer
40 MB
40 MB
40 MB
Management ports
1 RJ-45 port
2 ports: 1 RJ-45 and 1 SFP+
2 ports: 1 RJ-45 and 1 SFP+
L1 and L2 ports are not used in ACI
USB ports
1
1
1
RS-232 serial ports
1
1
1
Power supplies (up to 2)
500W AC, 930W DC, or 1200W
HVAC/HVDC
500W AC, 930W DC, or 1200W
HVAC/HVDC
350W AC
Typical power* (AC/DC)
260W
276W
178W
Maximum power (AC/DC)
425W
460W
287W
Input voltage (AC)
100 to 240V
100 to 240V
100 to 240V
Input voltage (high-voltage
AC [HVAC])
200 to 277V
200 to 277V
Input voltage (DC)
-48 to -60V
-48 to -60V
Input voltage (high-voltage
DC [HVDC])
-240 to -380V
-240 to -380V
Frequency (AC)
50 to 60 Hz
50 to 60 Hz
50 to 60 Hz
Fans
4
4
3
Airflow
Port-side intake and exhaust
Port-side intake and exhaust
Port-side intake and exhaust
Physical dimensions
(H x W x D)
1.72 x 17.3 x 22.5 in.
(4.4 x 43.9 x 57.1 cm)
1.72 x 17.3 x 22.5 in.
(4.4 x 43.9 x 57.1 cm)
1.72 x 17.3 x 19.7 in.
(4.4 x 43.9 x 49.9 cm)
Acoustics
57 dBA at 40% fan speed, 68.9
dBA at 70% fan speed, and 77.4
dB at 100% fan speed
64.2 dBA at 40% fan speed, 68.9
dBA at 70% fan speed, and 77.8
dB at 100% fan speed
67.5 dBA at 50% fan speed, 73.2
dBA at 70% fan speed, and 81.6
dB at 100% fan speed
RoHS compliance
Yes
Yes
Yes
MTBF
238,470 hours
319,790 hours
257,860 hours
*
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 10
Table 5 summarizes the features and benefits of the Cisco Nexus 9300 platform.
Table 5.
Features of Cisco Nexus 9300 Platform Leaf Switches for Cisco ACI Solution
Feature
Benefit
Predictable high
performance
Low latency with up to 3.6 Tbps of bandwidth enables customers to build a robust switch fabric scaling from as few
as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
Increased integrated
buffer space
Up to a total of 40 MB of integrated shared buffer space allows better management of speed mismatch between
access and uplink ports.
Designed for availability
Hot-swappable, redundant power supplies and fan trays increase availability.
Flexible airflow
configuration
Both port-side intake and port-side exhaust airflow configurations are supported.
Power efficiency
All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated, providing at least 90% efficiency with
20% utilization.
Advanced optics
Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit
Ethernet data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of
40 Gigabit Ethernet with no cable infrastructure upgrade cost.
Unified ports
Fibre Channel interfaces are supported for back-end storage connectivity (93180YC-FX only).
Security
Wire-rate MACsec encryption is available on all ports (9300-FX models only).
Power and Cooling
The switches are designed to adapt to any data center hot-aisle and cold-aisle configuration. The switches can be
installed with ports facing the rear, simplifying cabling of server racks by putting the ports closest to the servers
they support. The switches can be installed with the ports facing the front, simplifying the upgrade of existing racks
of switches in which network cables are wired to the front of the rack. The two deployment modes support front-toback cooling through a choice of power supplies and fan trays designed with opposite airflow directions, denoted
by red and blue tabs.
These two deployment modes are available with AC power supplies. Additionally, a 930W DC power supply
(with port-side intake and port-side exhaust) can be used for deployments with –48 to –60V DC power. For
high-voltage AC or DC environments, customers can also choose the N9K-PUV-1200W, which supports either 90
to 277V AC or –200 to –380V DC power and both airflow directions in one power supply unit.
To enhance availability, the platform supports 1+1 redundant hot-swappable 80 Plus Platinum-certified power
supplies and hot swappable N+1 redundant fan trays.
Software Requirements
The Cisco Nexus 9300 platform leaf switches run on Cisco ACI software on a 64-bit Linux kernel (Release 3.4.10)
with a single binary image that supports both Cisco ACI modular spine switches (Cisco Nexus 9500 platform) and
fixed-port switches (Cisco Nexus 9300 platform). The single image incorporates both the Linux kernel and Cisco
ACI software so that the switch can be booted through a standard Linux kickstart process.
For the latest software release information and recommendations, please refer to the product bulletin at
https://www.cisco.com/go/aci and the Cisco Feature Navigator.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Environmental Properties
Table 6 lists the environmental properties of the Cisco Nexus 9300 platform switches, and Table 7 lists the weights
of Cisco Nexus 9300 platform switches.
Table 6.
Environmental Properties
Property
Cisco Nexus 9300 Platform
Operating temperature
32 to 104°F (0 to 40°C)
Nonoperating (storage) temperature
-40 to 158°F (-40 to 70°C)
Humidity
5 to 95% (noncondensing)
Altitude
0 to 13,123 ft (0 to 4000m)
Table 7.
Weight
Component
Weight
Cisco Nexus 93180YC-EX without power supplies or fans
17.2 lb (7.8 kg)
Cisco Nexus 93108TC-EX without power supplies or fans
17.7 lb (8.0 kg)
Cisco Nexus 93180LC-EX without power supplies or fans
17.2 lb (7.8 kg)
Cisco Nexus 93180YC-FX without power supplies or fans
17.4 lb (7.9 kg)
Cisco Nexus 93108TC-FX without power supplies or fans
17.4 lb (7.9 kg)
Cisco Nexus 9348GC-FXP without power supplies or fans
14.2 lb (6.44 kg)
350W AC power supply
2.8 lb (1.27 kg)
500W AC power supply
2.42 lb (1.1 kg)
650W AC power supply
2.42 lb (1.1 kg)
1200W AC power supply
2.64 lb (1.2kg)
930W DC power supply
2.42 lb (1.1 kg)
1200W HVDC/HVAC power supply
2.42 lb (1.1 kg)
Regulatory Standards Compliance
Table 8 summarizes regulatory standards compliance for the Cisco Nexus 9300 platform.
Table 8.
Regulatory Standards Compliance: Safety and EMC
Specification
Description
Regulatory compliance
Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC
Safety
● UL 60950-1 Second Edition
● CAN/CSA-C22.2 No. 60950-1 Second Edition
● EN 60950-1 Second Edition
● IEC 60950-1 Second Edition
● AS/NZS 60950-1
● GB4943
EMC: Emissions
● 47CFR Part 15 (CFR 47) Class A
● AS/NZS CISPR22 Class A
● CISPR22 Class A
● EN55022 Class A
● ICES003 Class A
● VCCI Class A
● EN61000-3-2
● EN61000-3-3
● KN22 Class A
● CNS13438 Class A
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 10
Specification
EMC: Immunity
Description
● EN55024
● CISPR24
● EN300386
● KN 61000-4 series
RoHS
The product is RoHS-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors
Supported Optics Pluggable
For details about the optics modules available and the minimum software release required for each supported
optics module, visit
https://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.
Ordering Information
Table 9 presents ordering information for the Cisco Nexus 9300 platform. Note that you can order the Cisco Nexus
2000 Series Fabric Extenders either separately or along with the Cisco Nexus 9300 platform switches.
Table 9.
Ordering Information
Part Number
Product Description
Hardware
N9K-C93180YC-EX
Nexus 9300 with 48p 1/10G/25G SFP+ and 6p 40G/100G QSFP28
N9K-C93108TC-EX
Nexus 9300 with 48p 10G BASE-T and 6p 40G/100G QSFP28
N9K-C93180LC-EX
Nexus 9300 with 24p 40/50G QSFP+ and 6p 40G/100G QSFP28
N9K-C93180YC-FX
Nexus 9300 with 48p 1/10G/25G SFP+ and 6p 40G/100G QSFP28, MACsec, and Unified Ports
N9K-C93108TC-FX
Nexus 9300 with 48p 10G BASE-T and 6p 40G/100G QSFP28, MACsec
N9K-C9348GC-FXP
Nexus 9300 with 48p 100M/1G BASE-T, 4p 1/10/25G SFP28 and 2p 40G/100G QSFP28
NXA-PAC-350W-PI
Nexus 9000 350W AC PS, Port-side Intake
NXA-PAC-350W-PE
Nexus 9000 350W AC PS, Port-side Exhaust
NXA-PAC-500W-PI
Nexus 9000 500W AC PS, Port-side Intake
NXA-PAC-500W-PE
Nexus 9000 500W AC PS, Port-side Exhaust
NXA-PAC-650W-PI
Nexus 9000 650W AC PS, Port-side Intake, NEBs complaint
NXA-PAC-650W-PE
Nexus 9000 650W AC PS, Port-side Exhaust, NEBs complaint
NXA-PDC-930W-PE
Nexus 9000 930W DC PS, Port-side Exhaust
NXA-PDC-930W-PI
Nexus 9000 930W DC PS, Port-side Intake
UCSC-PSU-930WDC
930W DC PS, Port-side Intake
UCS-PSU-6332-DC
Nexus 9000 930W DC PS, Port-side Exhaust
N9K-PUV-1200W
Nexus 9300 1200W Universal Power Supply, Bi-directional air flow and Supports HVAC/HVDC
NXA-FAN-30CFM-F
Nexus 9300 Fan, Forward airflow (Port-side Exhaust)
NXA-FAN-30CFM-B
Nexus 9300 Fan, Reverse airflow (Port-side Intake)
Cisco Tetration Analytics License
N93-TTR1K9
Telemetry License for Nexus 9300 Platform
Cisco APIC Leaf Software Licenses
ACI-N9K-48X
ACI SW license for a 48p 1/10G Nexus 9K
ACI-N9K-96X
ACI SW license for a 96p 1/10G Nexus 9K
ACI-N9K-32Q
ACI SW license for a 32p 40G Nexus 9K
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 10
Part Number
Product Description
Cisco ACI Fabric Extender Software Licenses
ACI-F48X
ACI SW license for a 48p 1/10G Nexus 2K
ACI-F32X
ACI SW license for a 32p 1/10G Nexus 2K
ACI-F16X
ACI SW license for a 16p 1/10G Nexus B22 FEX
ACI-F48G
ACI SW license for a 48p 1G Nexus 2K
Cisco Application Virtual Switch (AVS)
ACI-AVS-48
ACI Software License for AVS: 48 Instances
ACI-AVS-96
ACI Software License for AVS: 96 Instances
Power Cords
CAB-250V-10A-AR
AC Power Cord - 250V, 10A - Argentina (2.5 meter)
CAB-250V-10A-BR
AC Power Cord - 250V, 10A - Brazil (2.1 meter)
CAB-250V-10A-CN
AC Power Cord - 250V, 10A - PRC (2.5 meter)
CAB-250V-10A-ID
AC Power Cord - 250V, 10A, South Africa (2.5 meter)
CAB-250V-10A-IS
AC Power Cord - 250V, 10A - Israel (2.5 meter)
CAB-9K10A-AU
Power Cord, 250VAC 10A 3112 Plug, Australia (2.5 meter)
CAB-9K10A-EU
Power Cord, 250VAC 10A CEE 7/7 Plug, EU (2.5 meter)
CAB-9K10A-IT
Power Cord, 250VAC 10A CEI 23-16/VII Plug, Italy (2.5 meter)
CAB-9K10A-SW
Power Cord, 250VAC 10A MP232 Plug, SWITZ (2.5 meter)
CAB-9K10A-UK
Power Cord, 250VAC 10A BS1363 Plug (13 A fuse), UK (2.5 meter)
CAB-9K12A-NA
Power Cord, 125VAC 13A NEMA 5-15 Plug, North America (2.5 meter)
CAB-AC-L620-C13
North America, NEMA L6-20-C13 (2.0 meter)
CAB-C13-C14-2M
Power Cord Jumper, C13-C14 Connectors, 2 Meter Length (2 meter)
CAB-C13-C14-AC
Power cord, C13 to C14 (recessed receptacle), 10A (3 meter)
CAB-C13-CBN
Cabinet Jumper Power Cord, 250 VAC 10A, C14-C13 Connectors (0.7 meter)
CAB-IND-10A
10A Power cable for India (2.5 meter)
CAB-N5K6A-NA
Power Cord, 200/240V 6A North America (2.5 meter)
Accessories
N3K-C3064-ACC-KIT
Nexus 3K/9K Accessory Kit
Warranty
The Cisco Nexus 9300 platform has a 1-year limited hardware warranty. The warranty includes hardware
replacement with a 10-day turnaround from receipt of a Return Materials Authorization (RMA).
Service and Support
Cisco offers a wide range of services to help accelerate your success in deploying and optimizing the Cisco Nexus
9300 platform in your data center. The innovative Cisco Services offerings are delivered through a unique
combination of people, processes, tools, and partners and are focused on helping you increase operation efficiency
and improve your data center network. Cisco Advanced Services use an architecture-led approach to help you
align your data center infrastructure with your business goals and achieve long-term value. Cisco SMARTnet™
Service helps you resolve mission-critical problems with direct access at any time to Cisco network experts and
award-winning resources.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 10
With this service, you can take advantage of the Cisco Smart Call Home service capability, which offers proactive
diagnostics and real-time alerts on your Cisco Nexus 9300 platform. Spanning the entire network lifecycle, Cisco
Services offerings help increase investment protection, optimize network operations, support migration operations,
and strengthen your IT expertise.
Cisco Capital Financing to Help You Achieve Your Objectives
Cisco Capital® financing can help you acquire the technology you need to achieve your objectives and stay
competitive. We can help you reduce capital expenditures (CapEx), accelerate your growth, and optimize your
investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services,
and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital financing is
available in more than 100 countries. Learn more.
For More Information
For more information about the Cisco Nexus 9000 Series and for the latest software release information and
recommendations, please visit https://www.cisco.com/go/nexus9000.
Printed in USA
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-738259-08
09/17
Page 10 of 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising