HBG-160 series
H B G - 1 6 0 series
160W Single Output Switching Power Supply
■ Features :
MEAN WELL patented housing design
(Patent No.: CN201220314551)
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
High efficiency up to 93.5%
Protections: Short circuit / Over current / Over voltage / Over temperature
OCP point adjustable through internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Type HL LED Driver for use in Class Ⅰ,
Division 2 hazardous location luminaires
110
F
HBG-160-60 A
M
Suitable for dry / damp / wet locations
5 years warranty, Tc70℃ 50000hrs
M
SELV IP65 IP67
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
Type HL
www.tuv.com
ID 2000000000
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output constant current level can be adjusted through internal potentiometer.
B : IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance
E(option) : IP67 rated. Can be fixed by steel support.
SPECIFICATION
MODEL
DC VOLTAGE
HBG-160-24
HBG-160-36
HBG-160-48
HBG-160-60
24V
36V
48V
60V
21.6 ~ 36V
28.8 ~ 48V
36 ~ 60V
CONSTANT CURRENT REGION Note.4 14.4 ~ 24V
RATED CURRENT
6.5A
4.4A
3.3A
2.6A
RATED POWER
156W
158.4W
158.4W
156W
300mVp-p
300mVp-p
300mVp-p
1.98 ~ 3.3A
1.6 ~ 2.6A
RIPPLE & NOISE (max.) Note.2 200mVp-p
OUTPUT
Can be adjusted by internal potentiometer A type only
CURRENT ADJ. RANGE
3.9 ~ 6.5A
2.6 ~ 4.4A
VOLTAGE TOLERANCE Note.3 ±2.0%
±0.5%
LINE REGULATION
±1.0%
LOAD REGULATION
SETUP, RISE TIME
Note.6 2500ms, 200ms / 115VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
12ms at full load
Note.5 90 ~ 305VAC
47 ~ 63Hz
POWER FACTOR (Typ.)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
CIRCUIT BREAKER
LEAKAGE CURRENT
OVER CURRENT
92%
0.78A / 230VAC
93%
93.5%
0.7A / 277VAC
COLD START 65A(twidth=425μs measured at 50% Ipeak) at 230VAC
4 units (circuit breaker of type B) / 7 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC
Note.4
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
EMC
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
92%
1.7A / 115VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
MAX. No. of PSUs on 16A
SAFETY &
127 ~ 431VDC
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
500ms, 200ms / 230VAC at full load
115VAC/230VAC
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
41 ~ 47V
54 ~ 62V
28 ~ 34V
65 ~ 75V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +60℃ (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750(type”HL”),CSA C22.2 No.250.13-12, EN61347-1,EN61347-2-13 approved, design refer to TUV EN60950
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3
EMC EMISSION
I/P-FG:2KVAC
O/P-FG:0.5KVAC
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547,light industry level (surge 4KV), criteria A
252.3Khrs min. MIL-HDBK-217F (25℃)
Refer to mechanical specification
DIMENSION
1.53Kg; 8pcs/13.8Kg/1.61CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
EMC IMMUNITY
MTBF
OTHERS
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 60% ~100% rated output voltage, and the output power must be more than 60% rated output power.
This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
8.To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to the mains.
File Name:HBG-160-SPEC 2016-02-18
H B G - 1 6 0 series
160W Single Output Switching Power Supply
Mechanical Specification
Case No.211
66.5
52.5
Blank:(HBG-160)
132
8.2
14.5
ψ151.68
132
Unit:mm
20
T case
M10*P1.5-18h
200±20
+V(Red)
-V(Black)
300±20
AC/L(Brown)
SJTW 18AWG*2C
AC/N(Blue)
(Green/Yellow)
SJTW 18AWG*3C
15
0
FG
45°
4-ψ6.0
Ta
※ T case: Max. Case Temperature.(case temperature measured point)
※ Ta: Ambient Temperature measured point
※ IP67 rated. Cable for I/O connection.
A type:(HBG-160-_A)
66.5
52.5
132
8.2
20
T case
M10*P1.5-18h
200±20
+V(Red)
-V(Black)
300±20
AC/L(Brown)
SJTW 18AWG*2C
AC/N(Blue)
(Green/Yellow)
13.00
SJTW 18AWG*3C
15
0
FG
13.33
132
14.5
ψ151.68
4-ψ6.0
45°
Ta
※ T case: Max. Case Temperature.(case temperature measured point)
※ Ta: Ambient Temperature measured point
※ IP65 rated. Output constant current level can be adjusted through internal potentiometer.
B type:(HBG-160-_B)
66.5
52.5
132
8.2
ψ151.68
14.5
132
20
T case
DIM+(Blue)
M10*P1.5-18h
300±20
DIM-(White)
SVT 18AWG*2C
AC/L(Brown)
200±20
+V(Red)
-V(Black)
300±20
SJTW 18AWG*2C
AC/N(Blue)
(Green/Yellow)
SJTW 18AWG*3C
15
0
FG
4-ψ6.0
45°
Ta
※ T case: Max. Case Temperature.(case temperature measured point)
※ Ta: Ambient Temperature measured point
※ IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance
File Name:HBG-160-SPEC 2016-02-18
H B G - 1 6 0 series
160W Single Output Switching Power Supply
E type (option) :(HBG-160-_E)
66.5
52.5
132
8.2
ψ151.68
14.5
20
T case
M10*P1.5-18h
200±20
132
0
15
+V(Red)
-V(Black)
300±20
AC/L(Brown)
SJTW 18AWG*2C
AC/N(Blue)
(Green/Yellow)
SJTW 18AWG*3C
15
0
FG
4-ψ6.0
45°
Ta
0
18
※ T case: Max. Case Temperature.(case temperature measured point)
※ Ta: Ambient Temperature measured point
※ IP67 rated. Can be fixed by steel support.
Block Diagram
fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PFC
CIRCUIT
+V
-V
O.C.P.
O.T.P.
FG
O.L.P.
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
100
90
80
80
230VAC
Input only
70
50
LOAD (%)
LOAD (%)
60
40
20
-40
-30
-10
0
15
30
50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
90
100
125
135
145
155 165
175
180
200
230
305
INPUT VOLTAGE (V) 60Hz
File Name:HBG-160-SPEC 2016-02-18
H B G - 1 6 0 series
160W Single Output Switching Power Supply
DIMMING OPERATION(for B-type only)
DIM+(Blue)
DIM-(White)
SVT 18AWG*2C
+V(Red)
-V(Black)
AC/L(Brown)
SJTW 18AWG*2C
AC/N(Blue)
FG
(Green/Yellow)
SJTW 18AWG*3C
※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
※ Please DO NOT connect "DIM-" to "-V".
※ Reference resistance value for output current adjustment (Typical)
Single driver
10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ
Resistance
Multiple
drivers
value
(N=driver quantity for synchronized 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N
OPEN
-----
dimming operation)
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~108%
※ 1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~108%
※ 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
OPEN
Percentage of rated current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
95%~108%
※Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to
achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
※Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
N
FG
L
Switch
Relay
Adjuster
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
HBG-160
B Type
AC/N
DIM+
DIMV(-)
V(+)
Blue
White
Black
Red
LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HBG-160-SPEC 2016-02-18
160W Single Output Switching Power Supply
H B G - 1 6 0 series
Power Factor Characteristic
Constant Current Mode
1
0.98
0.96
0.94
PF
0.92
0.9
0.88
115V
0.86
0.84
230V
0.82
277V
0.8
0.78
50%
60%
70%
80%
90%
100%
(150W)
LOAD
EFFICIENCY vs LOAD(48V Model)
HBG-160 series possess superior working efficiency that up to 93% can be reached in field applications.
94
92
90
EFFICIENCY (%)
88
86
115V
84
82
230V
80
277V
78
76
74
10%
20%
30%
40%
50%
60%
70%
80%
90% 100%
LOAD
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Vo(%)
100
(A)
(B)
Constant
Current area
Constant
Voltage area
Should there be any compatibility issues, please contact MEAN WELL.
60
(min.)
(C)
Hiccup
Protection
50
95
Io(%)
Typical LED power supply I-V curve
File Name:HBG-160-SPEC 2016-02-18
160W Single Output Switching Power Supply
H B G - 1 6 0 series
INSTALLATIONS
Hanger
Chain
Spot Light
High Bay Light
Stage Light
Caution
Please inspect the appearance of the product for completeness if the package is damaged. There should not
be any cracks.
Please do not drop or bump the product.
All screws including the suspension screw should be paired with a spring washer and locked tight.
The entire luminaire, including the power supply should be limited to less than 10Kg.
The luminaire should be cautiously protected throughout packaging and transportation to avoid damage due to shock.
Please thoroughly perform the cautionary notes above to prevent the possibility of the luminaire falling and
injuring personnel.
File Name:HBG-160-SPEC 2016-02-18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising