Untitled
CAUTION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated 'dangerous
voltage"
within
the
product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK), NO
USER
SERVICEABLE
PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important
operating
and
maintenance
(servicing)
instructions in the literature
accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1) Please read these instructions and keep them for future reference.
2) Pay attention to all warnings.
3) Follow all instructions.
4) Do not use this apparatus near water.
5) Clean only with a dry cloth.
6) Do not block any ventilation openings.
7) Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heaters, stoves, or other
apparatus (including amplifiers) that produce heat.
8) Protect the power cord from being walked on or kinked, in particular where the
plug is fitted and at the point where it exits from the apparatus.
9) Only use attachments / accessories specified by the manufacturer.
10) Unplug this apparatus during lightning storms or when unused for long periods
of time.
11) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power- supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
12) This appliance should not be exposed to dripping or splashing water and no
object filled with liquids, such as vases, should be placed on the apparatus.
13) Do not overload the wall power outlet. Use only power source as indicated i.e.120V AC mains.
1
IMPORTANT NOTES
Avoid installing this unit in places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters, on top of other stereo equipment that radiates too much
heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or
humid or moist areas.
Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a
clean dry cloth. Operate controls and switches as described in the manual. Before turning on
the power, make certain the AC power cord is plugged in. Store your CDs, in a cool area to
avoid damage from heat. When moving the set, be sure to first disconnect the power cord.
PREPARATION FOR USE
UNPACKING AND SET UP
·Carefully remove the unit from the display carton and remove all
TRANSIT SCREW
packing material from the unit.
·Unwind the AC power cord and extend it to its full length.
·Unwind the FM Antenna wire and extend it to its full length.
·Place the unit on a stable, level surface, convenient to an AC outlet, out
of Direct sunlight, and away from sources of excess heat, dust, moisture,
humidity or strong magnetic fields.
·Raise the lid to expose the phonograph. The phonograph has been
secured for shipment with a transit screw. Use a coin or screwdriver to
turn the transit screw clockwise. This will allow the Turntable to “float”.
·Remove the opaque white plastic stylus cover from the phonograph
stylus by sliding it Forward and down.
·Discard the stylus cover.
·Remove the twist-tie that was used to secure the tone arm during shipment.
·Release the tone arm lock lever.
·Connect the plug to your AC outlet.
TONE ARM LOCK LEVER
POWER SOURCE
This product is designed to operate on 120V 60Hz AC only. Attempting to operate this system from any other
power source may cause damage to the system, and such damage is not covered by your warranty.
NOTE: You will note that this system is equipped with domestic standard AC
power 2-pin plug. If this plug does not fit into your existing AC outlet, do not try
to defeat this safety feature by filing the wide blade to make it fit into your
outlet. If this plug will not fit into your outlet, you probably have an outdated
non-polarized AC outlet. You should have your
outlet changed by a qualified licensed electrician.
AC Outlet
AC Outlet
AC Plug
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the
controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any
marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the
furniture.
2
To prevent any damage to your furniture we strongly recommend that you purchase small selfadhesive felt pads, available at hardware stores and home improvement centers everywhere,
and apply these pads to the bottom of the rubber 'feet' before you place the product on fine
wooden furniture.
IMPORTANT: Raising and Lowering the Lid
To open the lid, raise it as far as it will go until the lid support bracket locks in the open position.
To close the lid, lift it upward slightly until the lid support bracket unlocks, and then gently lower
the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.
LOCATION OF CONTROLS AND INDICATORS
FRONT PANEL
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
Phonograph Lid.
Phonograph Lid Support Bracket.
Turntable.
Tuning Control knob.
FM Dial Scale.
Bluetooth Indicator.
AM Dial Scale.
AM/FM/PH/CD/BT Function Selector.
USB Socket.
RANDOM Control Button.
REPEAT Control Button.
PROGRAM Control Button.
PLAY/PAUSE Control Button.
STOP Control Button.
CD Drawer.
SKIP REV. Control Button.
17)
18)
19)
2〇)
21)
22)
23)
24)
25)
26)
27)
28)
29)
3
SKIP FWD. Control Button
OPEN/CLOSE Control Button
Tone-Arm.
CD Track Number Display
REC Control Button
FOLDER +10 Control Button
FOLDER -10 Control Button
Speakers
OFF-VOLUME Control
PHONE Jack
AUXIN Jack
FM Antenna
AC Power Cord
3
PHONOGRAPH:
1)
2)
3)
4)
5)
6)
7)
Turntable
45 RPM Adapter
Transit Screw
Cue Lever
Speed Selector (33 / 45 / 78 RPM)
Tone arm Lock
Tone arm with Stylus
REMOTE CONTROL OPERATION:
R1.OPEN / CLOSE
R2.RECORD
R3.REPEAT
R4.PLAY / PAUSE
R5.DN/FB (SKIP REV)
R6.DN/FF (SKIP Forward)
R7.STOP
R8.TRACK -10
R9. TRACK +10
R10.RANDOM
R11.DELETE
R12.PROGRAM
NOTE: ALL of the buttons on the remote
control have the same function as these buttons in the unit. This remote control just used for CD/MP3,
USB mode.
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
To turn the system on, select the AM or FM function, adjusting the TUNING button to receive stations, when
get the clear station, if you tune to strong FM Stereo station the FM ST indicator lamp will light and
reception will be in stereo. If you tune to a weaker FM station, the reception will automatically switch to
mono.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the cabinet slightly
until the internal antenna is picking up the strongest signal.
The FM wire antenna is located on the back of the cabinet. If necessary, adjust the position and direction of
this antenna until you find the position that provides the best reception.
4
NOTE:
Level hold PLAY/PAUSE button to enter function change as follows: CD-USB When the CD function model
has no CD/MP3 disc, inserts USB disk, will automatic switching to USB disk playback. If there’s CD/MP3
disc, select the CD function and level hold PLAY/PAUSE button to enter into USB function, insert USB disk,
the unit will start play the USB songs.
CD/MP3 FUNCTION OPERATION:
Select to the CD function. Press the OPEN/CLOSE button to open the CD door and the unit LCD displays
<OP>.
1. Place your CD or MP3 disc in the drawer with the printed label side facing up.
2. Press the OPEN/CLOSE button once more to close the CD door and the unit LCD display <CL〇>. The
disc will spin for a few seconds while the player reads the disc and will automatically playback.
PLAY CONTROL IN CD/MP3/USB MODEL:
1. Place your CD or MP3 disc in the drawer or insert USB disc. Will automatically playback. Play will
continue until the end of the DISC or USB disk. When the disc ends, the display again shows the total
number of tracks on the disc or USB disk.
You may also stop playback at any time by press the STOP button.
2. Adjust the OFF/VOLUME control to the desired level.
3. In play model: Press the SKIP FWD button on the unit front panel or UP/FF button on the remote control
to begin the next song.
4. Press the SKIP REV button on the unit front panel or DN/FB button on the remote control to begin the
previous song that has just been played.
5. Press the FOLDER +10 or FOLDER -10 button to skip forward or recede 10 tracks in CD/MP3/USB
MODEL.
SELECTING THE FOLDER PLAYBACK FOR MP3/USB:
In stop model: Press FOLDER +10 or FOLDER -10 button to selected the FOLDER+ or FOLDER- to confirm
the FOLDER tracks number. Press PLAY/PAUSE button to playback. The song number and folder number
of your selected track will be shown consecutively in every 2 seconds. You may also stop playback at any
time by press the STOP button.
5
SELECTING YOUR DESIRED PART FOR CD/MP3/USB:
Depress and hold SKIP FWD or SKIP REV button on the unit front panel or UP/FF or DN/FB button on the
remote control to select your desired part of the currently playing track and then release the buttons. The
playback will resume normal from that point.
PAUSE CONTROL IN CD/MP3/USB MODEL:
In CD/MP3/ USB playing mod: Press the PLAY/PAUSE button once. Play stops but the disc continues to
spin and the LCD indicator of the track number will flash. Press the PLAY/PAUSE button once more to
cancel pause and of track number stop flashing.
RECORD CD/MP3/USB/PHONO/BT FUNCTION:
In CD/MP3/ USB/PHONO and CASSETTE playing mode, select to the desired track songs. Insert USB and
press REC button once, the unit displays <rEC>, and the REC indicator lamp will shows. Press REC button
once more to confirm record to USB and the REC indicator lamp will flash. The unit can be recorded songs
for your select favorite songs numbers. If want to cancel press STOP button.
NOTE: In PHONO model record: To confirm record model, the unit display <rEC> and rec indicator lamp will
flash.
CANCEL USB SONGS OPERATION
The unit plays the song in USB: You dislike, pressing and hold the STOP button or DELETE button on the
remote control 2 seconds to cancel, the unit LCD will be displays <DEL>.
REPEAT PLAYBACK IN CD/MP3/USB MODE:
In CD/MP3/USB play mode: Press REPEAT button once will play the present track repeat playback and the
repeat indicator lamp will shows and flash.
Press the REPEAT button second time, will start repeat-all-song and the repeat indicator lamp stop flashes.
To cancel repeat playback: Press the REPEAT button third time, until the repeat Indicator lamp goes off.
Repeat playback will also be cancelled by pressing the STOP button.
RANDOM PLAYBACK IN CD/MP3/USB MODE:
In CD/MP3/USB play mode: Press RANDOM button to start random playing function random indicator lamp
will be shown. Press this button again will cancel the random function.
6
PROGRAM FUNCTION IN CD/MP3/USB MODE:
This feature allows you to program of the CD 20 tracks and MP3/USB 99 tracks on a disc for playback in
any desired order.
In CD/MP3/USB stop model: Press the PROGRAM button to enter the program mode. The program number
briefly shows '0 0 1', and the program indicator lamp flash. Press the SKIP FWD or SKIP REV button on the
unit front panel or UP/FF or DN/FB button on the remote control to select the first track number you wish to
enter in the program memory, example: Track number'008'. When the desired track number appears on the
display, press the PROGRAM button again to memorize the track. The program number briefly shows '0 0
2', then program indicator lamp will shows and flashes.
Repeat step of the above, select a different track number each time until you have entered up to CD 20
tracks and MP3/USB 99 tracks in the program memory.
Press the PLAY/PAUSE button to begin programmed playback. The PROGRAM indicator lamp stop
flashing. Playback will begin with the first track you have programmed and will continue until the last
programmed track has been played.
The programmed sequence may be cancelled by press STOP button twice.
7
PHONO FUNCTION OPERATION:
Select to the PHONO function. Make sure that you have removed the stylus cover from the cartridge.
1. Place your record on the center spindle.
2. Adjust the OFF/ VOLUME control to the desired level.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the Tone
Arm clamp could result in damage to the Tone Arm.
3. Set the turntable speed selector to the appropriate speed, 33, 45, or 78 RPM. If you are playing 45 RPM
singles, place the 45 RPM adapter on the center spindle.
4. To turn the system off, rotate the OFF/VOLUME control knob counter clockwise until a click is heard.
5. When turntable finishes playing, tone arm will return to original position automatically.
6. Move up or move down the speed adjustor to adjust PHONO playing speed. When the Speed display
indicates not exact 33 & 45 & 78.
BLUETOOTH FUNCTION OPERATION:
1, Turn on the unit, rotate the Volume control to desired level.
Turn the Function knob to PH mode, and make sure the tone-arm is on the resting state. A short Bluetooth
starting tone can be heard, then the Bluetooth indicator will be flashing.
2, Turn on your Bluetooth device, search for “ClassicAudio” and pair. Pairing code is “0000” is needed.
3, A short and delight tone will indicate successfully pairing. Play your Bluetooth device as you normally do
and the sound will be played from this unit. Enjoy the music.
NOTE:
1, Make sure your Bluetooth device and this unit is within 10 meters.
2, Check and see if there are other Bluetooth devices nearby interfering the signal and connection.
3, This unit could be paired by multiple different Bluetooth devices, but could only be connected and played
by
One of them at a time. Make sure no other device is actively connected to it already when you are trying to
connect the one you are working on.
IMPORTANT!!
TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION,
A SILVER TRANSIT SCREW IS LOCATED IN THE UPPER RIGHT CORNER OF THE TURNTABLE
PLATFORM.
• BEFORE PLAYING A RECORD, PLEASE USE A SCREWDRIVER OR COIN
TO TURN THE TRANSIT SCREW COMPLETELY DOWN IN CLOCKWISE
DIRECTION TO UNLOCK THE TURNTABLE.
• TO LOCK TH E TURNTABLE AGAIN FOR TRANSPORTATION, PLEASE
TURN THE SCREW IN COUNTER - CLOCKWISE DIRECTION.
8
COMPACT DISC CARE
To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it
carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike
conventional vinyl or shellac records, compact discs have no grooves to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the
outside of the disc. Small dust particles and light stains will have absolutely no effect on sound reproduction
quality.
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean
the disc. If necessary, use a CD cleaning kit.
Never affix labels to the surface of compact discs or write on them, except very gently with specialist CD-R
Pens.
CARE OF THE CABINETS
You should care for the cabinet as you would care for any piece of fine furniture. When the cabinet becomes
dusty, wipe it with a soft, non-abrasive dusting cloth. If the cabinet becomes smudged with finger prints, you
may use any good quality commercial dusting and polishing spray cleaner. However, avoid spraying the
plastic or metal parts of this system. We recommend that you spray the cleaner onto your dusting cloth not
directly onto the cabinet to avoid getting any of the spray on the plastic or metal parts.
TECHNICAL SPECS:








Belt Drive Turntable System
Ceramic Cartridge
Compatible with CD/MP3/CD-R/CD-RW Discs
Digital Audio File Compatibility: MP3, WMA
Maximum USB Flash Support Size: 64GB
Power: 120V, AC
Unit Dimensions (L x W x H): 19.4’’ x 13.2’’ x 9.2’’
Weight: 16.75 lbs.
9
CAUTION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated 'dangerous
voltage"
within
the
product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK), NO
USER
SERVICEABLE
PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important
operating
and
maintenance
(servicing)
instructions in the literature
accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1) Please read these instructions and keep them for future reference.
2) Pay attention to all warnings.
3) Follow all instructions.
4) Do not use this apparatus near water.
5) Clean only with a dry cloth.
6) Do not block any ventilation openings.
7) Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heaters, stoves, or other
apparatus (including amplifiers) that produce heat.
8) Protect the power cord from being walked on or kinked, in particular where the
plug is fitted and at the point where it exits from the apparatus.
9) Only use attachments / accessories specified by the manufacturer.
10) Unplug this apparatus during lightning storms or when unused for long periods
of time.
11) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power- supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
12) This appliance should not be exposed to dripping or splashing water and no
object filled with liquids, such as vases, should be placed on the apparatus.
13) Do not overload the wall power outlet. Use only power source as indicated i.e.120V AC mains.
1
IMPORTANT NOTES
Avoid installing this unit in places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters, on top of other stereo equipment that radiates too much
heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or
humid or moist areas.
Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a
clean dry cloth. Operate controls and switches as described in the manual. Before turning on
the power, make certain the AC power cord is plugged in. Store your CDs, in a cool area to
avoid damage from heat. When moving the set, be sure to first disconnect the power cord.
PREPARATION FOR USE
UNPACKING AND SET UP
·Carefully remove the unit from the display carton and remove all
TRANSIT SCREW
packing material from the unit.
·Unwind the AC power cord and extend it to its full length.
·Unwind the FM Antenna wire and extend it to its full length.
·Place the unit on a stable, level surface, convenient to an AC outlet, out
of Direct sunlight, and away from sources of excess heat, dust, moisture,
humidity or strong magnetic fields.
·Raise the lid to expose the phonograph. The phonograph has been
secured for shipment with a transit screw. Use a coin or screwdriver to
turn the transit screw clockwise. This will allow the Turntable to “float”.
·Remove the opaque white plastic stylus cover from the phonograph
stylus by sliding it Forward and down.
·Discard the stylus cover.
·Remove the twist-tie that was used to secure the tone arm during shipment.
·Release the tone arm lock lever.
·Connect the plug to your AC outlet.
TONE ARM LOCK LEVER
POWER SOURCE
This product is designed to operate on 120V 60Hz AC only. Attempting to operate this system from any other
power source may cause damage to the system, and such damage is not covered by your warranty.
NOTE: You will note that this system is equipped with domestic standard AC
power 2-pin plug. If this plug does not fit into your existing AC outlet, do not try
to defeat this safety feature by filing the wide blade to make it fit into your
outlet. If this plug will not fit into your outlet, you probably have an outdated
non-polarized AC outlet. You should have your
outlet changed by a qualified licensed electrician.
AC Outlet
AC Outlet
AC Plug
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the
controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any
marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the
furniture.
2
To prevent any damage to your furniture we strongly recommend that you purchase small selfadhesive felt pads, available at hardware stores and home improvement centers everywhere,
and apply these pads to the bottom of the rubber 'feet' before you place the product on fine
wooden furniture.
IMPORTANT: Raising and Lowering the Lid
To open the lid, raise it as far as it will go until the lid support bracket locks in the open position.
To close the lid, lift it upward slightly until the lid support bracket unlocks, and then gently lower
the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.
LOCATION OF CONTROLS AND INDICATORS
FRONT PANEL
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
Phonograph Lid.
Phonograph Lid Support Bracket.
Turntable.
Tuning Control knob.
FM Dial Scale.
Bluetooth Indicator.
AM Dial Scale.
AM/FM/PH/CD/BT Function Selector.
USB Socket.
RANDOM Control Button.
REPEAT Control Button.
PROGRAM Control Button.
PLAY/PAUSE Control Button.
STOP Control Button.
CD Drawer.
SKIP REV. Control Button.
17)
18)
19)
2〇)
21)
22)
23)
24)
25)
26)
27)
28)
29)
3
SKIP FWD. Control Button
OPEN/CLOSE Control Button
Tone-Arm.
CD Track Number Display
REC Control Button
FOLDER +10 Control Button
FOLDER -10 Control Button
Speakers
OFF-VOLUME Control
PHONE Jack
AUXIN Jack
FM Antenna
AC Power Cord
3
PHONOGRAPH:
1)
2)
3)
4)
5)
6)
7)
Turntable
45 RPM Adapter
Transit Screw
Cue Lever
Speed Selector (33 / 45 / 78 RPM)
Tone arm Lock
Tone arm with Stylus
REMOTE CONTROL OPERATION:
R1.OPEN / CLOSE
R2.RECORD
R3.REPEAT
R4.PLAY / PAUSE
R5.DN/FB (SKIP REV)
R6.DN/FF (SKIP Forward)
R7.STOP
R8.TRACK -10
R9. TRACK +10
R10.RANDOM
R11.DELETE
R12.PROGRAM
NOTE: ALL of the buttons on the remote
control have the same function as these buttons in the unit. This remote control just used for CD/MP3,
USB mode.
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
To turn the system on, select the AM or FM function, adjusting the TUNING button to receive stations, when
get the clear station, if you tune to strong FM Stereo station the FM ST indicator lamp will light and
reception will be in stereo. If you tune to a weaker FM station, the reception will automatically switch to
mono.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the cabinet slightly
until the internal antenna is picking up the strongest signal.
The FM wire antenna is located on the back of the cabinet. If necessary, adjust the position and direction of
this antenna until you find the position that provides the best reception.
4
NOTE:
Level hold PLAY/PAUSE button to enter function change as follows: CD-USB When the CD function model
has no CD/MP3 disc, inserts USB disk, will automatic switching to USB disk playback. If there’s CD/MP3
disc, select the CD function and level hold PLAY/PAUSE button to enter into USB function, insert USB disk,
the unit will start play the USB songs.
CD/MP3 FUNCTION OPERATION:
Select to the CD function. Press the OPEN/CLOSE button to open the CD door and the unit LCD displays
<OP>.
1. Place your CD or MP3 disc in the drawer with the printed label side facing up.
2. Press the OPEN/CLOSE button once more to close the CD door and the unit LCD display <CL〇>. The
disc will spin for a few seconds while the player reads the disc and will automatically playback.
PLAY CONTROL IN CD/MP3/USB MODEL:
1. Place your CD or MP3 disc in the drawer or insert USB disc. Will automatically playback. Play will
continue until the end of the DISC or USB disk. When the disc ends, the display again shows the total
number of tracks on the disc or USB disk.
You may also stop playback at any time by press the STOP button.
2. Adjust the OFF/VOLUME control to the desired level.
3. In play model: Press the SKIP FWD button on the unit front panel or UP/FF button on the remote control
to begin the next song.
4. Press the SKIP REV button on the unit front panel or DN/FB button on the remote control to begin the
previous song that has just been played.
5. Press the FOLDER +10 or FOLDER -10 button to skip forward or recede 10 tracks in CD/MP3/USB
MODEL.
SELECTING THE FOLDER PLAYBACK FOR MP3/USB:
In stop model: Press FOLDER +10 or FOLDER -10 button to selected the FOLDER+ or FOLDER- to confirm
the FOLDER tracks number. Press PLAY/PAUSE button to playback. The song number and folder number
of your selected track will be shown consecutively in every 2 seconds. You may also stop playback at any
time by press the STOP button.
5
SELECTING YOUR DESIRED PART FOR CD/MP3/USB:
Depress and hold SKIP FWD or SKIP REV button on the unit front panel or UP/FF or DN/FB button on the
remote control to select your desired part of the currently playing track and then release the buttons. The
playback will resume normal from that point.
PAUSE CONTROL IN CD/MP3/USB MODEL:
In CD/MP3/ USB playing mod: Press the PLAY/PAUSE button once. Play stops but the disc continues to
spin and the LCD indicator of the track number will flash. Press the PLAY/PAUSE button once more to
cancel pause and of track number stop flashing.
RECORD CD/MP3/USB/PHONO/BT FUNCTION:
In CD/MP3/ USB/PHONO and CASSETTE playing mode, select to the desired track songs. Insert USB and
press REC button once, the unit displays <rEC>, and the REC indicator lamp will shows. Press REC button
once more to confirm record to USB and the REC indicator lamp will flash. The unit can be recorded songs
for your select favorite songs numbers. If want to cancel press STOP button.
NOTE: In PHONO model record: To confirm record model, the unit display <rEC> and rec indicator lamp will
flash.
CANCEL USB SONGS OPERATION
The unit plays the song in USB: You dislike, pressing and hold the STOP button or DELETE button on the
remote control 2 seconds to cancel, the unit LCD will be displays <DEL>.
REPEAT PLAYBACK IN CD/MP3/USB MODE:
In CD/MP3/USB play mode: Press REPEAT button once will play the present track repeat playback and the
repeat indicator lamp will shows and flash.
Press the REPEAT button second time, will start repeat-all-song and the repeat indicator lamp stop flashes.
To cancel repeat playback: Press the REPEAT button third time, until the repeat Indicator lamp goes off.
Repeat playback will also be cancelled by pressing the STOP button.
RANDOM PLAYBACK IN CD/MP3/USB MODE:
In CD/MP3/USB play mode: Press RANDOM button to start random playing function random indicator lamp
will be shown. Press this button again will cancel the random function.
6
PROGRAM FUNCTION IN CD/MP3/USB MODE:
This feature allows you to program of the CD 20 tracks and MP3/USB 99 tracks on a disc for playback in
any desired order.
In CD/MP3/USB stop model: Press the PROGRAM button to enter the program mode. The program number
briefly shows '0 0 1', and the program indicator lamp flash. Press the SKIP FWD or SKIP REV button on the
unit front panel or UP/FF or DN/FB button on the remote control to select the first track number you wish to
enter in the program memory, example: Track number'008'. When the desired track number appears on the
display, press the PROGRAM button again to memorize the track. The program number briefly shows '0 0
2', then program indicator lamp will shows and flashes.
Repeat step of the above, select a different track number each time until you have entered up to CD 20
tracks and MP3/USB 99 tracks in the program memory.
Press the PLAY/PAUSE button to begin programmed playback. The PROGRAM indicator lamp stop
flashing. Playback will begin with the first track you have programmed and will continue until the last
programmed track has been played.
The programmed sequence may be cancelled by press STOP button twice.
7
PHONO FUNCTION OPERATION:
Select to the PHONO function. Make sure that you have removed the stylus cover from the cartridge.
1. Place your record on the center spindle.
2. Adjust the OFF/ VOLUME control to the desired level.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the Tone
Arm clamp could result in damage to the Tone Arm.
3. Set the turntable speed selector to the appropriate speed, 33, 45, or 78 RPM. If you are playing 45 RPM
singles, place the 45 RPM adapter on the center spindle.
4. To turn the system off, rotate the OFF/VOLUME control knob counter clockwise until a click is heard.
5. When turntable finishes playing, tone arm will return to original position automatically.
6. Move up or move down the speed adjustor to adjust PHONO playing speed. When the Speed display
indicates not exact 33 & 45 & 78.
BLUETOOTH FUNCTION OPERATION:
1, Turn on the unit, rotate the Volume control to desired level.
Turn the Function knob to PH mode, and make sure the tone-arm is on the resting state. A short Bluetooth
starting tone can be heard, then the Bluetooth indicator will be flashing.
2, Turn on your Bluetooth device, search for “ClassicAudio” and pair. Pairing code is “0000” is needed.
3, A short and delight tone will indicate successfully pairing. Play your Bluetooth device as you normally do
and the sound will be played from this unit. Enjoy the music.
NOTE:
1, Make sure your Bluetooth device and this unit is within 10 meters.
2, Check and see if there are other Bluetooth devices nearby interfering the signal and connection.
3, This unit could be paired by multiple different Bluetooth devices, but could only be connected and played
by
One of them at a time. Make sure no other device is actively connected to it already when you are trying to
connect the one you are working on.
IMPORTANT!!
TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION,
A SILVER TRANSIT SCREW IS LOCATED IN THE UPPER RIGHT CORNER OF THE TURNTABLE
PLATFORM.
• BEFORE PLAYING A RECORD, PLEASE USE A SCREWDRIVER OR COIN
TO TURN THE TRANSIT SCREW COMPLETELY DOWN IN CLOCKWISE
DIRECTION TO UNLOCK THE TURNTABLE.
• TO LOCK TH E TURNTABLE AGAIN FOR TRANSPORTATION, PLEASE
TURN THE SCREW IN COUNTER - CLOCKWISE DIRECTION.
8
COMPACT DISC CARE
To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it
carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike
conventional vinyl or shellac records, compact discs have no grooves to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the
outside of the disc. Small dust particles and light stains will have absolutely no effect on sound reproduction
quality.
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean
the disc. If necessary, use a CD cleaning kit.
Never affix labels to the surface of compact discs or write on them, except very gently with specialist CD-R
Pens.
CARE OF THE CABINETS
You should care for the cabinet as you would care for any piece of fine furniture. When the cabinet becomes
dusty, wipe it with a soft, non-abrasive dusting cloth. If the cabinet becomes smudged with finger prints, you
may use any good quality commercial dusting and polishing spray cleaner. However, avoid spraying the
plastic or metal parts of this system. We recommend that you spray the cleaner onto your dusting cloth not
directly onto the cabinet to avoid getting any of the spray on the plastic or metal parts.
TECHNICAL SPECS:








Belt Drive Turntable System
Ceramic Cartridge
Compatible with CD/MP3/CD-R/CD-RW Discs
Digital Audio File Compatibility: MP3, WMA
Maximum USB Flash Support Size: 64GB
Power: 120V, AC
Unit Dimensions (L x W x H): 19.4’’ x 13.2’’ x 9.2’’
Weight: 16.75 lbs.
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising