10-Port Industrial USB 3.0 Hub
10-Port Industrial USB 3.0 Hub - ESD and Surge
Product ID: ST1030USBM
This 10-port USB 3.0 hub gives you the scalability you need in harsh industrial environments. It’s
designed to meet the advanced requirements of connecting a high number of devices in factory and
industrial settings.
With a metal housing, you can depend on this industrial hub even in tough operating conditions. And
because it offers more ports than most USB 3.0 hubs, you can access more devices at once, so you can
work more efficiently and save time.
1800 808 346
Connect more USB devices
Designed for a high volume of connections in industrial environments, this robust USB 3.0 hub offers ten
connection ports, unlike most four or seven-port USB 3.0 (also known as USB 3.1 Gen 1) hubs.
With more ports you can connect more devices, such as USB-based control equipment, external storage,
and more. Plus, you can avoid the aggravation of connecting and disconnecting devices when all ports are
The hub also supports USB Battery Charging Specification 1.2, delivering up to 1.5 amps power to each
USB port, so you can charge your mobile devices faster than traditional USB ports allow.
Perfect for harsh industrial environments
This industrial USB hub delivers reliable performance with a metal, heavy-duty housing. And because it
supports wide-range 7-24V DC terminal block input, you have the flexibility to power the hub as required,
based on your own power input capabilities.
Perfect for factory environments, the rugged hub also supports an extended operating temperature range
(0°C to 70°C) and offers surge and ESD protection to each USB port, which can help prevent damage to
your connected devices.
Locate the hub where you need it most
With versatile installation options, you can install the hub where it’s best suited for your environment. You
can securely mount the USB 3.0 hub to a surface, wall, or under a desk, and, it includes optional DIN rail
mounts for use with equipment rack installations.
1800 808 346
Works with your older USB devices
The industrial hub supports the full 5Gbps bandwidth of USB 3.0 and is also backward compatible with
previous USB devices. You can connect your legacy USB 2.0 and 1.x peripherals alongside your newer
USB 3.0 devices without any disruptions.
The ST1030USBM is backed by a StarTech.com 2-year warranty and free lifetime technical support.
1800 808 346
Certifications, Reports
and Compatibility
Install the hub in tough conditions that are subject to large
temperature variances, or where there’s a risk of physical damage
Deploy on assembly lines where only terminal block power is
Connect a variety of USB devices such as industrial printers or
cameras, plus fast-charge your smartphone and tablet
Provides maximum USB scalability, with ten USB 3.0 Type-A ports
Protects your connected devices with 15kV ESD protection and 350watt surge protection
Offers flexible, wide-range 7-24V DC terminal block power input
(standard AC power adapter not supported or included)
Ideal for harsh industrial environments, with an extended operating
temperature range
Rugged, wall-mountable metal housing plus optional DIN rail mounts
Supports USB Battery Charging Specification 1.2 and delivers 1.5
amps to each USB port
Ten SuperSpeed USB 3.0 hub ports, with throughput support up to
Supports multi transaction translators (Multi-TT) on each port for
legacy USB devices
Integrated, threaded screw-lock holes - prevent cables from
becoming loose or disconnected in an industrial environment
Backward compatible with USB 2.0 and 1.x devices
1800 808 346
2 Years
Bus Type
USB 3.0
Chipset ID
Genesys Logic - GL3520
Fast-Charge Port(s)
Industry Standards
USB Battery Charging Specification Rev. 1.2
USB 3.0 - Backward compatible with USB 2.0/1.1
USB 3.0
USB-C Device Port(s)
USB-C Host Connection
Maximum Data Transfer Rate
5 Gbps
119388 hours
Surge Protection
15kV ESD protection
350 W surge protection
Type and Rate
USB 3.0 - 5 Gbit/s
Connector Type(s)
10 - USB Type-A (9 pin) USB 3.0 Female
1 - USB Type-B (9 pin) USB 3.0 Female
1 - Terminal Block (2 Wire)
OS Compatibility
OS Independent; No additional drivers or software required
Special Notes /
If connected to a USB 2.0 host port, performance may be
This product is intended for use with terminal block power
only – Standard AC adapter not available
System and Cable Requirements
Host computer with an available USB 3.0 port
LED Indicators
1 - Power (Green)
Input Voltage
7 ~ 24 DC
Power Source
Terminal Block
5%~95% RH (Non-condensing)
Operating Temperature
0°C to 70°C (32°F to 158°F)
Storage Temperature
-20°C to 85°C (-4°F to 185°F)
Cable Length
80 in [2032 mm]
1800 808 346
Enclosure Type
Form Factor
Product Height
1.2 in [31 mm]
Product Length
7.8 in [198 mm]
Product Weight
12.1 oz [343 g]
Product Width
2.2 in [56 mm]
Shipping (Package) Weight
20 oz [567 g]
What's in the Box
Included in Package
1 - 10-port industrial USB 3.0 hub
1 - USB 3.0 host cable
1 - DIN rail mounting kit
1 - terminal block (2 wire)
1 - instruction manual
Product appearance and specifications are subject to change without notice.
1800 808 346
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF