RKP2415-2417-2419 LCD-KB
User
Manual
RKP2415 / 2417 / 2419
2U 15” / 17” / 19” Rackmount
TFT LCD Monitor Keyboard Drawer
RKP2415 / RKP2417 / RKP2419
User Manual
1.
Table Of Content
1.
Table of Content
P.1
2.
Introduction
P.2
3.
Features
P.2
4.
Package Contents
P.3
5.
Optional Accessories
P.4
6.
Peripheral Products
P.4
7.
Important Safeguards
P.5
8.
Structure Diagram
P.6
9.
Dimension Diagram
RKP2415
RKP2417
RKP2419
P.7
P.8
P.9
10. LCD OSD Menu Operation
LCD Membrane Diagram
Main Menu
Sub Menu
P.10
P.10
P.11-12
11. Resolution Settings
For Windows
For Sun Servers
12. Technical Specification
Rev. : 1.0
P.1
P.13
P.14
P.15
RKP2415 / RKP2417 / RKP2419
User Manual
2.
Introduction
RKP Series is a combination of keyboard, mouse and monitor into a drawer,
with features such as flip-up design, adjustable brackets, built in LCD OSD to
provide effective assistant for an administrator to control PC system.
RKP Series provides cost effective for your limited IT budget over using CRT
and rack mounting. Also, it will be space saving for your compact environment
rack and effective assistant for an administrator to control PC system.
3.
Features
●
Unique monitor flip up design allows viewing through closed glass door
of cabinet
●
Adjustable mounting brackets from 390 to 650mm (front to rear 19”
mount)
●
May be fitted into 800mm deep rack by the use of extended brackets on
request
●
Three models to choose from 15”, 17” or 19” LCD Panel
●
Two keyboard selections supporting multiple languages
●
Front-access lock for security.
●
Build-in slide rail and mounts easily in any 19” cabinet
●
Built in On Screen Display controlled by integral membrane switches.
●
Lightweight Aluminium construction – with black anodize finish
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation
Rev. : 1.0
P.2
RKP2415 / RKP2417 / RKP2419
User Manual
4.
Package Contents
LCD Monitor
1 Piece
User Manual
1 Piece
DC Power Adapter
1 Piece
Power Cord
1 Piece
Mounting Bracket
1 Pair
Key for front acess lock
2 Pieces
Fasteners
4 Pieces
CD-6 3-in-1 KVM cable
1 Piece
Before Unpacking
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
●
The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or
mounted into a suitable cabinet.
●
Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
●
Convenience for connecting the LCD Keyboard Drawer to the related facilities should be
well considers too.
Unpacking
The LCD keyboard drawer comes with the standard parts shown as above. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the
supplier immediately.
Rev. : 1.0
P.3
RKP2415 / RKP2417 / RKP2419
User Manual
5.
Optional Accessories
Model
Description
SUN-31
SUN / iMac USB to PS/2 adapter
Video Input
15" - 19" Touch Screen
12V / 24V / 48V DC Power Supply
6.
Rev. : 1.0
Peripheral Products
Model
Description
CV-401
4-Port PS/2 KVM switch
CV-801
8-Port PS/2 KVM switch
CV-1601
16-Port PS/2 KVM switch
CV-101
CAT.5 PS/2 KVM extender
P.4
RKP2415 / RKP2417 / RKP2419
User Manual
7.
Important Safeguards
Please read all of these instructions carefully before you use the device.
Save this manual for future reference.
●
Unplug the LCD Keyboard Drawer from the power outlet before cleaning.
●
Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a
neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen
slightly with it.
●
Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or
sunlight.
●
Avoid pressure on the LCD screen to prevent permanent damage to the display.
●
Do not attempt to service the device yourself. Improper operation may void your
warranty. Refer all servicing to qualified service personnel.
●
●
Safe storage environment of the LCD Keyboard Drawer is ranging between –20oC
and 60oC. Permanent damage could occur if the LCD Keyboard Drawer is stored
outside the safe range.
Unplug the LCD Keyboard Drawer immediately and call qualified service
personnel under the following conditions:
1. The VGA signal cord is frayed or damaged.
2. If the monitor has been exposed to rain, liquid or water.
3. If the monitor has been dropped or the casing has been damaged.
What the warranty does not cover
1.
Any product, on which the serial number has been defaced, modified or
removed.
2.
Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied
with the product.
b) Repair or attempted repair by anyone not authorized by us.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuation or failure.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other causes which does not relate to a product defect.
3.
Rev. : 1.0
Removal, installation, and set-up service charges.
P.5
RKP2415 / RKP2417 / RKP2419
User Manual
8.
Structure Diagram
1,
PS/2 keyboard
2,
Aluminium front panel
3,
Class A active matrix TFT LCD panel
4,
Analog to digital signal converter board
5,
Rear metal case
6,
LCD inverter
7,
LCD membrane
8,
Ball bearing telescopic slides with stopper
9,
Adjustable mounting bracket
10,
Optional KVM switch
• ‚ ƒ
„ …†
Š ‡
Rev. : 1.0
P.6
ˆ
Š
‰
RKP2415 / RKP2417 / RKP2419
User Manual
9.
Dimension Diagram
RKP2415 2U 15” LCD Keyboard Drawer
Rev. : 1.0
P.7
RKP2415 / RKP2417 / RKP2419
User Manual
9.
Dimension Diagram
RKP2417 2U 17” LCD Keyboard Drawer
Rev. : 1.0
P.8
RKP2415 / RKP2417 / RKP2419
User Manual
9.
Dimension Diagram
RKP2419 2U 19” LCD Keyboard Drawer
Rev. : 1.0
P.9
RKP2415 / RKP2417 / RKP2419
User Manual
10.
LCD OSD Menu Operation
LCD Membrane Diagram
Power
Menu/Selection
Right
Left
Exit
MAIN MENU
BRIGHT/CONTRAST
AUTO ADJUST
PHASE/CLOCK
H/V POSITION
MISC
RESET
Main Menu
Bright / Contrast
●
To enter into the Bright, Black level & Contrast sub-menu
Auto Adjust
●
To perform automatic optimisations of all functions
●
An “ Adjusting” message is displayed during the process
Phase / Clock
●
To enter into the phase & clock sub menu
H/V Position
●
To enter into the Position sub-menu
MISC
●
To enter into the MISC sub-menu
Reset
● Reset to the default factory settings
Rev. : 1.0
P.10
RKP2415 / RKP2417 / RKP2419
User Manual
10.
LCD OSD Menu Operation
Bright / Contrast
1. Brightness
●
To perform brightness adjustment of the input RGB signal
●
Use the Left & Right button to adjust and button
to “Brightness”
2. Contrast
●
To adjust the contrast level of the input signal
●
Use the Left & Right button to adjust and button
to “Contrast”
Phase / Clock
1. Phase
●
To adjust input video sampling clock’s phase
●
Use the Left & Right button to adjust and button
to “Phase”
2. Clock
●
To adjust input video sampling clock
●
Use the Left & Right button to adjust and button
to “Clock”
H/V Position
1. H.Position
●
To adjust the horizontal size of the frame
●
Use the Left & Right button to adjust and button
to “H.position”.
2. V.Position
Rev. : 1.0
●
To adjust the vertical position of the frame
●
Use the Left & Right button to adjust and button
P.11
to “V.position”.
RKP2415 / RKP2417 / RKP2419
User Manual
10.
LCD OSD Menu Operation
MISC
1. Information
●
●
●
The first header row shows the current resolution setup
The second header row shows the horizontal frequency of the current
input signal
The third header row shows the vertical frequency of the current input
signal
2. OSD Timer
●
To modify the duration of the OSD time-out
3. Color
a) 5500K
●
Select Colour Temp at 5500K
b) 6500K
●
Select Colour Temp at 6500K
c) 9500K
●
Select Colour Temp at 9500K
d) User
●
Change Colour Temp by manual
4. Language
● To select the language of OSD menu 7 Languages :
Rev. : 1.0
(1)
English
(2)
Japanese (日本語)
(3)
Chinese (中文)
(4)
German
(5)
Francais
(6)
Espanol
(7)
Italiano
P.12
RKP2415 / RKP2417 / RKP2419
User Manual
11.
Resolution Settings
For Microsoft Windows
Step 1 – Press right click on the desktop
Step 2 – Choose “Properties”
Step 3 – Change the “Screen Resolution”
Step 4 – Change the “Screen refresh rate”
Rev. : 1.0
P.13
RKP2415 / RKP2417 / RKP2419
User Manual
11.
Resolution Settings
For SUN Servers
●
●
●
●
●
●
●
●
Resolution configuration procedures should be run by qualified SUN
server administrator
Sun Servers are using resolution at 1152 x 900 x 76Hz.
Supported resolution mode for 15” LCD:
1024 x 768 x 70/75Hz
Supported resolution mode for 17” LCD:
1280 x 1024 x 75Hz
You need to change the Sun Server resolution before you connect to
LCD Display.
Please do the following procedures to change the resolution settings :
1. As root:
You may find the following comment “/user/sbin/m64config”.
2. To view current resolution:
Type “/user/sbin/m64config – prconf”.
3. To change to 1024x768 @ 70MHz:
Type “/user/sbin/m64config – res 1024x768x70 now”.
4. The screen will be rubbish.
5. Then type “pkill Xsun”.
And Type “pkill Xsession” to restart the Xsession.
Note : Remember to RESTART the server after these processes.
●
Under Common Desktop Environment (CDE).
●
To change the OpenBoot resolution, you can type the following
command in OK prompt.
1. In OK prompt, type “setenv output-device screen:r1024x768x70”.
2. Type “printenv” to confirm the resolution has been changed
to 1024x768x70Hz.
3. Then type, “reset” to restart the system.
Note : Remember to RESTART the server after these processes.
Rev. : 1.0
P.14
RKP2415 / RKP2417 / RKP2419
User Manual
12.
Technical Specification
LCD
Description
Item
LCD Screen Manufacturer
South Korea
LCD Origin
Panel
15” TFT
17” TFT
19” TFT
Resolution
1,024 x 768
1,280 x 1,024
1,280 x 1,024
Brightness
300 cd/m2
350 cd/m2
500 cd/m2
Color
16.2 Million
16.2 Million
16.7 Million
Contrast Ratio
450:01:00
350:01:00
500:01:00
Viewing Angle
140° x 125°
140° x 120°
170° x 170°
304 x 228 mm
337 x 270 mm
376 x 301 mm
0.297 mm
0.264 mm
0.294 mm
Display Area
Pixel Pitch
Response Time (Tr)
5ms
15ms
Response Time (Tf)
20ms
10ms
Back Light
Horizontal Sync.
Vertical Sync.
4 x Cold Cathode Fluorescent Tube
48.4 kHz
64 ~ 80 kHz
64 kHz
65 MHz
60 ~ 75 Hz
60 Hz
Analog RGB 0.7Vp-p
Input Signal
VESA DPMS
Power Management
Brightness, Contract, Colour, Clock
H.Position, V.Position, Phase, Scaling
OSD Control
Auto Config., Input Select, Multi-Window
Clear EEPROM, OSD adjust
Power Input
12V DC Adapter
Video Input
15-pin D-Sub Connector
Dimension
RKP2415 / 2417 : 43.9W x 8.8H x 44D cm
RKP2419 : 43.9W x 8.8H x 48D cm
Weight
RKP2415 : 11kg /
2417 : 12.5kg /
2419 : 14kg
*All brand names, logo registered trademarks are properties of their respective owners.
Rev. : 1.0
P.15
Print at 8/2004
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising