MiiNePort E3 Series
Embedded Device Servers
MiiNePort E3 Series
10/100 Mbps embedded serial device servers
››MiiNePort NetEZ Technology makes integration incredibly easy
››Use’s Moxa’s high quality and reliable second generation MiiNe
SoC
››Versatile choice of operation modes fulfill specific application
requirements
››Green design with extremely low power consumption
››802.3af compliant PoE pass-through
››Highly compact embedded device module
Overview
Moxa’s MiiNePort E3 series embedded device servers are designed for
manufacturers who want to add sophisticated network connectivity
to their serial devices with minimal integration effort. The MiiNePort
E3 is empowered by the MiiNe, Moxa’s second generation SoC, which
supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate,
a versatile selection of ready-to-use operation modes, and requires
only a small amount of power. By using Moxa’s innovative NetEZ
technology, the MiiNePort E3 can be used to convert any device with
a standard serial interface to an Ethernet enabled device in no time. In
addition, the MiiNePort E3 is a compact embedded device server with
an RJ45 connector, making it easy to fit into virtually any existing serial
device.
The MiiNe—Moxa’s 2nd Generation SoC
The MiiNe was created to provide
manufacturers with a competitive
embedded serial-to-Ethernet
solution. The MiiNePort E3, which uses the MiiNe for its SoC, is
a compact embedded device server that has the lowest power
consumption of similar products. The MiiNe has the following features:
•
•
•
•
MOXA MiiNe
Designed for serial-to-Ethernet applications
Uses an ARM core
Uses Moxa’s own advanced UART technology
2 MB Flash and 4 MB SDRAM memory built in
SDRAM (4MB)
SPI
FLASH (2MB)
GPIO
POWER System
I2C
Watchdog Timer
Timer
MAC Ethernet
UART
PHY
8 Pin Connector
RJ45 Connector
Specifications
Form Factor
Type: Pin header module
Dimensions: 35 x 52.5 x 18 mm (1.37 x 2.07 x 0.71 in)
Weight: 12 g
System Information
CPU: 32-bit ARM Core
RAM: 4 MB built in
Flash: 2 MB built in
Ethernet Interface
Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: RJ45 (magnetic)
Magnetic Isolation Protection: 1.5 KV built-in
LEDs: 10BASE-T & 100BASE-TX Link Activity, Fault/In-Use
1
Serial Interface
Number of Ports: 1
Transmission Format: Standard TTL
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Baudrate: (non-standard baudarates supported)
MiiNePort E3: 50 bps to 230.4 Kbps
MiiNePort E3-H: 50 bps to 921.6 Kbps
Serial Signals
TTL: TxD, RxD, RTS, CTS, RST (reset circuit), GND
w w w. m o x a . c o m
info@moxa.com
Embedded Device Servers
Digital I/O Pins
Power Requirements
GPIO: 4
Input Voltage: 3.3 to 5 VDC (±5%)
Power Consumption: 157 mA @ 3.3 VDC, 119 mA @ 5 VDC input
max.
Software
Network Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP
V1, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration Options: Web Console, Serial Console (Serial Command
Mode), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, SVR 4.2,
QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers: Linux kernel 2.4.x, 2.6.x
Operation Modes: Real COM, TCP Server, TCP Client, UDP, Ethernet
Modem, RFC2217
Standards and Certifications
EMI: EN 55022 Class B, EN 61000-3-2, EN 61000-3-3
EMS: FCC Part 15 Subpart B Class B, EN 55024 (direct & indirect ESD,
electrical fast transients & burst immunity, power frequency magnetic
field immunity), IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC
61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
Shock: 500 g’s for non-operational shock
Vibration: 20 g’s for non-operational vibration
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Environmental Limits
Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Dimensions
Unit: mm (inch)
22.86 (0.9)
6.08 (0.24)
26 (1.02)
4.5 (0.18)
7.62
(0.3)
L+ L1
R+ R2
8
2
7
3.06 (0.12)
52.5 (2.07)
50 (1.97)
43 (1.69)
2.54 (0.1)
30.08 (1.18)
9.27
(0.36)
3.5 (0.14)
35 (1.38)
1
16.25 (0.64)
2.54 (0.1)
2
w w w. m o x a . c o m
info@moxa.com
Embedded Device Servers
Pin Assignment
Ethernet Pins (JP2)
Serial Pins and Power Pins (JP4)
Pin
Signal Name
Function
Pin
Signal Name
Function
Pin
Signal Name
Function
1
Reserve
N/A
1
Serial Rx
Receive Serial Data
11
DTR
Data Terminal Ready
2
Reserve
N/A
2
Ready LED
System To Ready LED
12
Reserve
N/A
3
Reserve
N/A
3
Serial Tx
Transmit Serial Data
13
DSR
Data Set Ready
4
Reserve
N/A
4
GPIO
Programmable I/O
14
Reserve
N/A
5
POE signal
pair 1
PoE Power from Tx
signal
5
DCD
Receive Line Signal Detector
15
CTS
Clear To Send
6
POE spare pair 1
PoE Power from RJ45
4, 5 pin
6
GPIO
Programmable I/O
16
SW_Reset
Reset to factory default
7
POE signal
pair 2
PoE Power from Rx
signal
7
RS485_ EN0
RS-485 Enable
17
Reserve
N/A
8
POE spare pair 2
PoE Power from RJ45
7, 8 pin
8
GPIO
Programmable I/O
18
Reserve
N/A
9
RTS
Request To Send
19
GND
Circuit Ground
10
GPIO
Programmable I/O
20
VCC
Power Supply
Ordering Information
Available Modules
MiiNePort E3: Embedded device server for TTL devices, drop-in module, 10/100M with RJ45
connector, 50 bps to 230.4 Kbps baudrate, 0 to 55°C operating temperature
MiiNePort E3-H: Embedded device server for TTL devices, drop-in module, 10/100M with RJ45
connector, 50 bps to 921.6 Kbps baudrate, 0 to 55°C operating temperature
MiiNePort E3-T: Embedded device server for TTL devices, drop-in module, 10/100M with RJ45
connector, 50 bps to 230.4 Kbps baudrate, -40 to 85°C operating temperature
MiiNePort E3-H-T: Embedded device server for TTL devices, drop-in module, 10/100M with RJ45
connector, 50 bps to 921.6 Kbps baudrate, -40 to 85°C operating temperature
Available Starter Kits
MiiNePort E3-ST: Starter kit for the MiiNePort E3 Series, module included
MiiNePort E3-H-ST: Starter kit for the MiiNePort E3-H Series, module included
3
Package Checklist (modules)
• MiiNePort E3 module
Package Checklist (starter kits)
• MiiNePort E3 module (MiiNePort E3 or
MiiNePort E3-H only)
• MiiNePort E3 evaluation board
• Universal power adaptor
• 2 power cords
• Null modem serial cable
• Cross-over Ethernet cable
• 2 flat cables
• 1 pack screw and spacer
• Document and software CD
• Quick installation guide
• Warranty card
© Moxa Inc. All Rights Reserved. Updated Dec. 9, 2011. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising