NX404E - Clarion
Owner’s manual
NX404E
DVD MULTIMEDIA STATION WITH BUILT-IN
NAVIGATION & 6.2” TOUCH PANEL CONTROL
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED IN THE
OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
English
OBS!
Apparaten innehåller laserkomponenten som
avger laserstrålning överstigande
gränsen för laserklass 1.
Owner’s Manual
This appliance contains a laser system
and is classified as a “CLASS 1 LASER
PRODUCT”. To use this model properly, read
this Owner’s Manual carefully and keep this
manual for your future reference. In case of
any trouble with this player, please contact
your nearest “AUTHORIZED service station”.
To prevent direct exposure to the laser beam,
do not try to open the enclosure.
E nglish
CAUTIONS:
VAROITUS
Suojakoteloa si saa avata.
Laite sisältää
laserdiodin, joka lähettää
näkymätöntä
silmille vaarallista lasersäteilyä.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,at
der anvendes laserstråler af svageste klasse,
og at man ikke på apparatets yderside kan
blive udsat for utilladelig kraftig
stråling.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i apparatet,
at man kan komme til at udsaætte sig for
laserstråling.
NX404E
1
Contents
English
Owner’s Manual
1. FEATURES............................................................................................................4
Expanding Systems...............................................................................................4
2. PRECAUTIONS.....................................................................................................5
3. CAUTIONS ON HANDLING.................................................................................7
Operation Panel.....................................................................................................7
USB Port................................................................................................................7
Cleaning.................................................................................................................7
Handling Discs.......................................................................................................8
4.OPERATIONAL PANEL.......................................................................................10
Functions of Buttons............................................................................................10
5. REMOTE CONTROL(OPTIONAL)......................................................................11
Remote Control Function ....................................................................................12
6. MAIN MENU.......................................................................................................14
7. DVD VIDEO PLAYER OPERATIONS.................................................................15
Discs....................................................................................................................15
Change DVD System Settings.............................................................................16
Watching to a Disc...............................................................................................16
Operate the DVD Player Menu.............................................................................17
Operate the Video files Player Menu...................................................................19
Switching Subtitles..............................................................................................19
Video Files List.....................................................................................................19
Play DivX Video-On-Demand File........................................................................19
Playable Disc Video Formats...............................................................................20
8. CD PLAYER OPERATIONS...............................................................................21
Listening to a Disc/Ejecting a Disc......................................................................21
Showing CD Player Mode Screen.......................................................................21
Operate the CD Player Menu...............................................................................21
Listening to Compressed Audio..........................................................................22
Tag Display Function...........................................................................................22
9. USB AUDIO OPERATIONS................................................................................24
Notes on Using USB Memories...........................................................................24
Select USB Audio Mode......................................................................................24
Playing Audio Files in USB Memory....................................................................25
Notes on Using USB Memories...........................................................................26
Select USB Video Mode......................................................................................26
Playing Video Files in USB Memory....................................................................26
Playable Video Formats.......................................................................................26
10. USB VIDEO OPERATIONS...............................................................................26
11. iPod OPERATIONS..........................................................................................28
Notes on using Apple iPod/iPhone......................................................................28
iPod Audio ID3 Info..............................................................................................28
iPod Audio Playlist Mode Screen........................................................................29
iPod Video ID3 Mode Screen...............................................................................31
iPod Video List Mode Screen..............................................................................31
iPod Video Simple Control Mode Screen............................................................32
iPod Video Play Mode Screen.............................................................................32
iPod Audio Bluetooth Mode.................................................................................32
12. Bluetooth® AUDIO PLAYER OPERATIONS...................................................33
Selecting the Bluetooth Audio Mode...................................................................33
Bluetooth Audio Player Settings..........................................................................33
Registering your Bluetooth audio player (Pairing)...............................................33
Selecting the Bluetooth Audio Player..................................................................34
Controlling the Bluetooth Audio Player................................................................34
2
NX404E
E nglish
Owner’s Manual
NX404E
English
13. Bluetooth® TELEPHONE OPERATIONS...........................................................35
Select the BT Phone Mode..................................................................................35
Bluetooth Telephone Settings.............................................................................35
Registering Your Cellular Phone (Pairing)............................................................36
Select the Cellular Phone.....................................................................................36
Obtaining the Phone Book Data..........................................................................36
Telephone Operations.........................................................................................36
14. TUNER OPERATIONS..................................................................................................38
15. TV OPERATIONS ...............................................................................................39
16. DAB OPERATIONS.......................................................................................................40
17. HDMI MODE..................................................................................................................42
Select HDMI source ............................................................................................43
18. AUX ..................................................................................................................44
19. CAMERA INPUT OPERATIONS......................................................................44
20. REAR SOURCE OPERATIONS........................................................................45
DVD Video in Rear...............................................................................................45
DVD Video Rear Source Control Information Mode. ..........................................45
DVD Video Rear Source Control Direct Mode. ...................................................45
iPod Video in Rear...............................................................................................46
iPod Video Rear Source Control Play Mode........................................................46
iPod Video Rear Source ID3 Mode......................................................................46
TV in Rear............................................................................................................46
21. SETTING OPERATIONS...................................................................................47
General Setup Menu............................................................................................47
Video Setup Menu...............................................................................................47
Audio Setup Menu...............................................................................................48
Navigation Setup Menu.......................................................................................48
Others Setup Menu..............................................................................................48
Set the Anti-Theft code........................................................................................49
22. TROUBLESHOOTING......................................................................................50
GENERAL.............................................................................................................50
DVD PLAYER.......................................................................................................50
USB DEVICE........................................................................................................51
Bluetooth.............................................................................................................51
TFT screen...........................................................................................................52
23. ERROR DISPLAY.............................................................................................53
DVD PLAYER.......................................................................................................53
24. SPECIFICATIONS.............................................................................................54
25. WIRE CONNECTION GUIDE............................................................................56
3
English
1. FEATURES
FLAC(Free Lossless Audio Codec)
Built-in Bluetooth® Handsfree (HFP) and Audio Streaming (A2DP &
Owner’s Manual
AVRCP)
Front-Panel Auxiliary Input and 6ch RCA Output with Subwoofer Control
Expanding Systems
Expanding audio features
External Power
Amplifier
Expanding visual features
Rear monitor
Rear Vision Camera
iPod®
USB
Memory
(Connect via CCA-750)
iPhone®
iPhone/ Smartphone via HDMI
(Connect via CCA-750)
(Connect via CCA-770 or CCA-771)
Bluetooth
Telephone
NOTE:
•The items listed outside of the frames are the commercial products generally sold.
•CCA-750,CCA-770,CCA-771:Sold separately.
4
NX404E
E nglish
English
2. PRECAUTIONS
WARNING
Owner’s Manual
• For your safety, the driver should not watch any video sources and/or operate the controls while driving.
Please note that watching and operating any video sources while driving are prohibited by law in some
countries. Also, while driving, keep the volume to a level at which external sounds can be heard.
• Do not disassemble or modify this unit. It may cause an accident, fire, or electric shock.
• Do not use this unit when a trouble exists, such as no screen content appears or no sound is
audible. It may cause an accident, fire, or electric shock. For that case, consult your authorized
dealer or a nearest Clarion service center.
• In case of a problem, such as any material has been entered in the unit, the unit gets wet, or
smoke or strange smells come out of the unit, etc., stop using this unit immediately, and consult
your authorized dealer or a nearest Clarion service center.
Using it in that condition may cause an accident, fire, or electric shock.
• Use a fuse with the same specification only when replacing the fuse.
Using a fuse with a different specification may causes a fire.
• For the installation of this unit or a change in the installation, ask your authorized dealer or a
nearest Clarion service center for safety. Professional skills and experiences are required to do
so.
• This navigation system should not be used to replace your own judgment. No itinerary suggested
by this navigation system should ever override any highway regulations, your own judgment, or a
knowledge of safe driving practices. Do not follow the navigation system’s suggested itinerary if it
would cause you to perform a dangerous or illegal act, place you in a dangerous situation, or take
you into an area you consider unsafe.
• The advice provided by the navigation system is to be regarded as a suggestion only. There may
be times when the navigation system displays the vehicle’s location incorrectly, fails to suggest
the shortest route, or fails to direct you to your desired destination. In such instances, rely on your
own driving judgment, taking into account the driving conditions at the time.
• Do not use the navigation system to locate emergency services. The database does not contain
a complete listing of emergency services such as police stations, fire halls, hospitals and walk-in
clinics. Please show discretion and ask for directions in such instances.
• As the driver, you alone are responsible for your driving safety.
• In order to avoid a traffic accident, do not operate the system while driving.
• In order to avoid a traffic accident, operate the system only when the vehicle is stopped at a safe
place and the parking brake is on.
• In order to avoid a traffic accident or traffic offense, remember that actual road conditions and
traffic regulations take precedence over the information contained on the navigation system.
• The software may contain inaccurate or incomplete information due to the passage of time,
changing circumstances, and the sources of information used. Please respect current traffic
conditions and regulations at all times while driving.
• Where actual road conditions and highway regulations differ from the information contained on
the navigation system, abide by the highway regulations.
• Keep the amount of time spent viewing the screen while driving to a strict minimum.
• The navigation system does not provide, nor represent in any way information on: traffic and
highway regulations; technical aspects of the vehicle including weight, height, width, load and
speed limits; road conditions including grade, percentage of incline and surface conditions;
obstacles such as the height and width of bridges and tunnels; and other current driving or road
conditions. Always rely on your own judgment when driving a car, taking into account current
driving conditions.
NX404E
5
English
Owner’s Manual
1.When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc (DVD/
CD) or the optical parts of the player and
proper playback may not be possible. If
moisture forms on the disc (DVD/CD), wipe it
off with a soft cloth. If moisture forms on the
optical parts of the player, do not use the
player for about one hour. The condensation
will disappear naturally allowing normal
operation.
10R-047135
55 E
2.Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
技术说明:
1、大小65x75mm,红色外框线为刀模线。
2、材质,80g铜版纸,过哑胶。
3、内容印刷黑色:PANTONE Black C。
4、要求内容印刷正确、清晰,贴纸表面干净、整洁,不得有脏污、斑点、折痕;
切边务必整齐,不得歪斜。
3.This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
6
NX404E
CNE
机
1:1
NX404E
吕崇垚
20140102
E nglish
English
3. CAUTIONS ON HANDLING
Operation Panel
• The operation panel will operate properly in a
temperature range of 0˚ to 60˚ C.
• Do not allow any liquids on the set from
drinks, umbrellas etc. Doing so may damage
the internal circuitry.
• Do not disassemble or modify the set in any
way. Doing so may result in damage.
• Subjecting the operation panel to shocks
may result in breakage, deformation or other
damage.
• Do not let cigarettes burn the display.
Owner’s Manual
For a longer service life, be sure to read the following cautions.
• The remote control unit may not work if the
remote control sensor is exposed to direct
sunlight.
*Remote control unit is sold separately.
• In extremely cold weather, the display
movement may slow down and the display
may darken, but this is not a malfunction.
The display will work normally when the
temperature increases.
• Small black and shiny spots inside the liquid
crystal panel are normal for LCD products.
• If a problem should occur, have the set
inspected at your store of purchase.
USB Port
• The USB memory sticks must be recognized
as “USB mass storage class” to work
properly. Some models may not operate
correctly.
When the memorized data is lost or
damaged by any chance, Clarion shall not
be liable for any damage.
When using an USB memory stick, we
recommend that you backup your data stored
on it before by using a personal computer etc.
• Data files may be broken when using USB
memory sticks in the following situation:
When disconnecting the USB memory stick or
turning the power off during writing or reading
data. When affected by static electricity or
electric noise. Connect/disconnect the USB
memory stick when it is not accessed.
• Connecting with the computer is not covered.
Cleaning
• Cleaning the cabinet
Use a soft, dry cloth and gently wipe off
the dirt. For tough dirt, apply some neutral
detergent diluted in water to a soft cloth, wipe
off the dirt gently, then wipe again with a dry
cloth.
Do not use benzene, thinner, car cleaner, etc.,
as these substances may damage the cabinet
or cause the paint to peel. Also, leaving rubber
or plastic products in contact with the cabinet
for long periods of time may cause stains.
• Cleaning the liquid crystal panel
The liquid crystal panel tends to collect dust,
so wipe it off occasionally with a soft cloth.
The surface is easily scratched, so do not rub
it with hard objects.
NX404E
7
Handling Discs
English
Owner’s Manual
Handling
•New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound
may skip. Use a ball-point pen or the like
to remove any roughness from the edge
of the disc.
Storage
•Do not expose discs to direct sunlight or
any heat source.
•Do not expose discs to excess humidity
or dust.
•Do not expose discs to direct heat from
heaters.
Ball-point pen
Roughness
Never stick labels on the surface of the
disc or mark the surface with a pencil or
pen.
•Never play a disc with any cellophane
tape or other glue on it or with peeling off
marks. If you try to play such a disc, you
may not be able to get it back out of the
DVD player or it may damage the DVD
player.
•Do not use discs that have large
scratches, are misshapen, cracked,
etc. Use of such discs may cause
missoperation or damage.
•To remove a disc from its storage case,
press down on the center of the case
and lift the disc out, holding it carefully
by the edges.
•Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
8
NX404E
Cleaning
•To remove fingermarks and dust, use
a soft cloth and wipe in a straight
line from the center of the disc to the
circumference.
•Do not use any solvents, such as
commercially available cleaners, antistatic spray, or thinner to clean discs.
•After using special disc cleaner, let the
disc dry off well before playing it.
On Discs
•Never turn off the power and remove the
unit from the car with a disc loaded.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
• "Made for iPod," and "Made for iPhone" mean
that an electronic accessory has been designed to
connect specifically to iPod, or iPhone, respectively,
and has been certified by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod
or iPhone may affect wireless performance. iPhone, iPod, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and
other countries.
Lightning is a trademark of Apple Inc.
• The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth® SIG, Inc. And
any use of such marks by Clarion Co.,Ltd. is under
license. Other trademarks and trade names are
those of their respective owners.
NX404E
9
Owner’s Manual
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
• DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
DivX Certified® to play DivX® video, including
premium content. Covered by one or more
of the following U.S. patents: 7,295,673;
7,460,668; 7,515,710; 7,519,274
ABOUT DivX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of
Rovi Corporation.
This is an official DivX Certified® device that
has passed rigorous testing to verify that it
plays DivX video. Visit divx.com for more
information and software tools to convert your
files into DivX videos.
ABOUT DivX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order
to play purchased DivX Video-on-Demand
(VOD) movies. To obtain your registration
code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for
more information on how to complete your
registration.
E nglish
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of this
copyright protection technology must be authorized
by Rovi Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi Corporation.
English
About the registered marks, etc.
English
4.OPERATIONAL PANEL
Owner’s Manual
[
[Microphone]
[MENU]
]
[Disc slot]
[NAVI/AV]
[POWER/VOL]
[IR]
[RESET]
[microSD slot]
[Cover]
[AUX IN]
Functions of Buttons
[POWER/VOL] Knob
• Press this knob to turn on the power.
• When the power is already on, it moves to the
Navigation mode. If Navigation mode is displayed, it
moves to the Navigation menu.
• Keep pressing this knob more than 2 second to turn
off the power.
• Turn this knob to left or right to decrease or increase
the volume of the system.
[NAVI/AV] Button
• Press this button to display NAVI, press again to
return current source.
• Press and hold this button for 2 seconds to display
the Dimmer setting menu.
[ ] Eject
• Press to eject disc from the unit.
[MENU] Button
• Press this button to display main menu; press again
to return current source.
• Press and hold this button for 2 seconds to turn off
the monitor. Press any place of the screen to turn on
the monitor again.
[RESET] Button
• Press this button to hardware reset the unit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
10
NX404E
[microSD slot ]
Note: The microSD card is only for navigation. Please
don’t insert microSD card for other purpose. After
insertion of microSD card for MAP, don’t remove it;
otherwise, the navigation function will be disabled.
[AUX IN]
AUX 1 Connector.
[Microphone]
This is used for Bluetooth phone.
[IR] SENSOR
•Receiver for the remote control unit (operating range:
30 degree in all directions).
E nglish
*Remote control unit is sold separately.
English
5. REMOTE CONTROL(OPTIONAL)
Signal transmitter
Operating range : 30°in all directions
[
/
]
[ 0-9 ]
Owner’s Manual
[MUTE]
[OPEN]
[POWER / SRC]
[VOLUME]
[NAV/ AV]
[SRCH]
[BACK]
[BAND]
[SEL]
[MENU]
[PIC]
[ENT]
[
,
,
,
]
[TITLE]
[TA]
[RPT]
[ROOT]
[
], [
]
[
], [
[ZOOM]
[SUB.T]
[AUDIO]
[ANGLE]
Replacing the batteries
1.Press the retention tab and pull out the
battery tray and remove the old battery.
2. Insert the new CR2025 battery and slide
the battery tray back in the remote control
the same direction that you removed it.
Please ensure the tray is inserted in the
]
CAUTION
• Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doctor
immediately.
• Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such as
sunshine, fire or the like.
correct direction.
WARNING
Lithium batteries contain
Perchlorate
Dispose of discharged batteries properly.
NX404E
11
• When disposing of used batteries, comply with
governmental regulations or environmental public
institutions’ rules that apply in your country/area.
English
CAUTION
• Use one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not
used for a month or longer.
Important
• Do not store the remote control in high
temperatures or direct sunlight.
Owner’s Manual
• There is a danger of explosion if battery in
incorrectly replaced. Replaced only with the same
or equivalent type.
• The remote control may not function properly in
direct sunlight.
• Do not handle the battery with metallic tools.
• Do not let the remote control fail onto the floor,
where it may become jammed under the brake or
accelerator pedal.
• Do not store the battery with metallic objects.
• If the battery leaks, wipe the remote control
completely clean and install a new battery.
Remote Control Function
You can use the remote control unit to control the NX404E.
*Remote control unit is sold separately.
Note:
• The wireless remote control operation may not be optimal in direct sunlight.
[
/
] Button
[BAND] Button
• Press this button to play or pause video and audio
media.
• Switch to next band alternately.
• Press this button more than 1 second to stop video
and audio media.
• Press this button to open the Audio setting menu in
any mode.
[SET] Button
[MUTE] Button
[BACK] Button
• Mute or Unmute the speaker.
• Press this button to quit main menu if current screen
is main menu.
on upper right area of the screen
• The symbol
indicates that speaker is muted.
[POWER/SRC] Button
• Press this button to move the focus to next available
source item on main menu.
• Press this button to power on when the unit is power
off.
• Press this button more than 1 second to power off
when the unit is power on.
[
], [
], [
], [
] Buttons
• Press this button for cursor movement in main menu
or Setting mode.
• From the main menu, you can select your desired
source or change your settings.
[MENU] Button
• Press this button to enter the MAIN MENU or return
current resource.
[0 - 9] Buttons
[PIC] Button
• Use in the Key Pad screen to select the radio.
• Press and hold this button to change your monitor
Dimmer.
• Use to select the track in the track list screen.
• Press to enter DVD video chapters/titles in the Key
Pad screen.
[VOLUME] Buttons
[ENT] Button
• Press to fix the entered data in the Key Pad screen
or enter the item the cursor is on.
• Increase and decrease volume.
[TA] Button
[NAVI/AV] Button
•Press the button to set TA On or Off.
• Press this button to switch between current source
and current position on navigation map.
• Press to go to the title menu on the DVD.
[TITLE] Button
[SRCH] Button
[ROOT] Button
• Press this button to open chapter or title search
window while playing DVD.
• Press to go to the root menu on the DVD.
12
NX404E
[RPT] Button
4x, 8x or 16x.
• Press to perform Repeat Track /Repeat Folder/
Repeat All while playing MP3/WMA, or video files in
USB memory.
[
], [
] Buttons
• Press to seek the next available lower or higher
station in Tuner mode.
• Press to select the next higher or lower chapter
number in DVD video mode.
[ZOOM] Button
• Press to turn on and zoom in while playing DVD. You
can zoom in up to 3x. (No all DVD disc supports this
function).
[AUDIO] Button
• Press to switch the AUDIO channel of the disc while
playing DVD.
[SUB-T] Button
• Press to switch next available subtitle while playing
DVD.
• Press to display Video menu in iPod mode.
[ANGLE] Button
• Press to select the next lower or higher track in CD,
USB Video, USB Audio mode.
• Press to switch the different ANGLE while playing
DVD. (No all DVD disc supports this function)
• Press for movement of background source in
Navigation mode.
• Press to display Audio menu in iPod mode.
[
], [
]Buttons
[OPEN] Button
• Press to eject disc from the unit.
• Press to manually select the next higher or lower
station in Tuner modes.
• Press to perform fast-backward or fast-forward
searching. Press again to change the speed to 2x,
NX404E
13
Owner’s Manual
• Press to perform Repeat Track /Repeat Folder/
Repeat All while playing MP3/WMA, or video files on
disc.
English
• Press to perform Repeat Track/Repeat All while
playing CD.
• Press for movement of background source in
Navigation mode.
E nglish
• Press to perform chapter repeat / title repeat / repeat
off while playing DVD mode.
English
6. MAIN MENU
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1 - Tuner---Touch the button to display the Tuner mode.
2 - DAB---Touch the button to display the DAB mode.
3 - Bluetooth Audio--- Touch the button to display the
Bluetooth Audio mode.
4 - Disc Audio---Touch the button to display the Disc
Audio mode.
5 - iPod Audio---Touch the button to display the iPod
Audio mode.
Owner’s Manual
1
16
17
18
6 - Navigation---Touch the button to display the
Navigation mode.
7 - TV---Touch the button to display the TV mode.
8 - USB Audio---Touch the button to display the USB
Audio mode.
9 - HDMI---Touch the button to display the HDMI
mode.
10 - Disc Video---Touch the button to display the Disc
Video mode.
11 - USB Video---Touch the button to display the USB
Video mode.
12 - iPod Video---Touch the button to display the iPod
Video mode.
13 - Telephone--- Touch the button to display the
Telephone mode.
14 - Camera---Touch the button to display the Camera
mode.
15 - AUX1 ---Touch the button to display the AUX1
mode.
16 - Setting button---Touch the button to display the
Setting menu.
17 - AUX2 ---Touch the button to display the AUX2
mode.
18 - Audio off---Touch the button to make audio source
voice off.
19 - Rear---Touch the button to display the Rear mode.
19
Scrolling the menu
Flicking to right or left it will switch to next or previous
page of main menu.
Moving the menu position
1. Touch any quadrate icon on main menu more than 2
seconds, the icon will float on main menu.
2. Scrolling the floating icon to any position you want.
14
NX404E
E nglish
English
7. DVD VIDEO PLAYER OPERATIONS
Discs
Playable discs
DVD video discs
Audio CD
CD TEXT
Playable media files
MP3/WMA/AAC
DivX
MP4
About CD Extra disc
A CD Extra disc is a disc in which a total of two
sessions have been recorded. The first session
is Audio session and the second session is Data
session.
Your personally-created CDs with more than
second data sessions recorded cannot be played
on this DVD video player.
Note:
• When you play a CD Extra disc, only the first
session will be recognized.
• You cannot play SuperAudio CD.
The CD player is not supported even if it is a
hybrid disc.
About MP3/WMA playback
This unit can play back CD-R/CD-RW, DVD-R/
RW and DVD+R/RW discs on which MP3/WMA
music data have been recorded.
For a detailed information, see the section
entitled “Listening to compressed audio”.
Note on region numbers
The DVD video system assigns a region number
to DVD video players and DVD discs by sales
area. DVD video players sold in Asia can play
back DVD discs with the region number “ALL”,
“2” or any combination of numbers that also
incorporate a “2”.
The DVD video region number is marked on the
disc jacket as shown below.
ALL
2
1
2
4
Europe
About playing a CD-R/CD-RW disc (MP3,
WMA)
This player can play CD-R/CD-RW discs
previously recorded in music CD format (MP3,
WMA).
About playing a DVD-R/RW or DVD+R/RW
disc
MP3/WMA files recorded on DVD-R/ RW and
DVD+R/RW discs can be played.
Discs that cannot be played back
This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc.
Note:
• It may also not be possible to play back CDs
recorded on a CD-R unit and CD-RW unit.
(Cause: disc characteristics, cracks, dust/dirt,
dust/dirt on player’s lens, etc.)
• If a CD-R or CD-RW disc that has not been
finalized is played, it will take a long time to
start playing. Also, it may not be possible to
play depending on its recording conditions.
NX404E
15
Owner’s Manual
Playable discs
This DVD video player can play the following
discs.
Change DVD System Settings
English
Note:
If the setup operation is performed in the middle of DVD
video play, the disc will restart from the beginning.
Owner’s Manual
Selecting DVD Setup Menu
1. Touch the [Settings] button on the Main Menu to
access the Video setup menu.
2. Touch [Video] button.The video menu is displayed.
Set rating for parental level control
1.Select Others screen while in Setting mode. Touch
[Parental Control] button. Touch the desired rating for
level control. Use this table to set the parental level.
Kid Safe
G
PG
PG-13
PG-R
R
NC-17
Kid Safe
General Audiences
Parental Guidance Suggested
Parents Strongly Cautioned
Parental Guidance Restricted
Restricted
No One 17 And Under Admitted
Adult
Only Adult
• The contents that the parental level restricts vary
with the country code.
Note: The rating can be selected only under the
password unlocked status, and the limits can be set only
under the password locked status.
Watching to a Disc
Setting up the Screen Size
Touch the [DVD Wide Screen Mode] button to turn on
or turn off the DVD wide screen mode.
The factory default setting is “off”
Note: Not all DVD disc support this function.
Setting up the password for parental level
control
The factory default pass code is “0000”.
1.In Main Menu touch [Settings] button. Touch
[Others] button on the display. Touch the [Set
Password] ---- and a numerical key pad will appear.
1.To load a disc:
Insert the disc into the center of the insertion slot the
label side facing up.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
Note:
•Never insert foreign objects into the disc insertion slot.
•If the disc is not inserted easily, there may be another
disc in the mechanism or the unit may require service.
•8cm (single play) discs cannot be used.
2. Disc starts playing automatically.
WARNING
Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal setting
after the video has started.
Ejecting a disc
Input a new password and come again. The password
is set.
Note:
When a disc with view restrictions is inserted, you will
be prompted to input this password. The disc will not be
viewable until the correct password is entered.
16
NX404E
1.To eject a disc press eject [ ] button. The play
mode then switches to the Tuner mode.
If the disc is left in the ejected position for 10
seconds, the disc is automatically reloaded. In this
case, the play mode will remain in the Tuner mode.
Note: If you force a disc into before auto reloading, it
may damage a disc. Change DVD System Settings
11
10
Operate the DVD Player Menu
You can select the button items displayed in the DVD
menu by directly touching it.
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Skip (Search) a Chapter
1
2
3
4
5
6
7
8
9
1.Touch [ ] or [ ] button during playback.
Chapters are skipped down or up from current
locations, as many times as the button is touched, and
playback starts.
Skip use seek bar
Touch the triangle [ ] on seek bar and drag it to any
position where you want to start playback.
Fast Forward/Fast Backward
13
1.Touch [ ] or [ ] button and hold 2 seconds to
start fast backward or fast forward during playback.
The playback speed starts at 2x, then will increase
to 4x, 8x, and 16x. Release the button will continue
playing with normal speed.
14
15
16
17
18
Note:
•No audio is reproduced during fast forward and fast
backward operation.
•The fast forward and fast backward speed may differ
depending on the disc.
Search function
19
1 - Option button
2 - Show Cursor button
3 - Previous Chapter /Fast Backward button
4 - Play/Pause button
5 - Next Chapter /Fast Forward button
6 - Elapsed playing time
7 - Seek bar
8 - Total time
9 - Menu List button
10 - System time
11 - Bluetooth status indicator
You can locate the beginning of a scene using the
chapter numbers or title numbers recorded on the
DVD Video disc.
1.Showing the DVD Video menu, touch [
] button.
The Key Pad screen appears with the chapter/Title
number input mode.
Touching [
] button turns the Key Pad to the
chapter number input mode.
Touching [
] button turns the Key Pad to the title
number input mode.
• Title
A large segment to divide the data area of the disc.
• Chapter
A small segment to divide the data area of the disc.
2.Input the number of the title/chapter that you want
to play with the [0] to [9] button.
] button. Change DVD System
3.Touch the [
Settings
NX404E
17
Owner’s Manual
12
12 - DVD playback information
13 - Shortcut button
14 - Repeat Switching button
15 - Audio Channel switching button
16 - Subtitle switching button
17 - Angle button
18 - Direct chapter or title searching button
19 - Information button
E nglish
After disc is loaded, the play mode is automatically
engaged.
Touch any place of the screen to display DVD Video
menu touch the screen again to return the playback
screen. The display will return to the playback screen,
if you do not touch the screen for 10 seconds.
English
Showing DVD Player mode screen
English
Owner’s Manual
Playback starts from the scene of the input title
number or chapter number.
NOTE:
*If the input title/chapter number does not exist or
searching with a title/chapter number is not allowed,
the screen image will not change.
4.Touch [
] button to close the key pad.
Repeat Playback
This operation plays back chapters recorded on the
DVD-Video repeatedly.
1.Showing the DVD Video menu, touch [
] button.
] button once for Repeat Chapter, again
2.Touch [
for Repeat Title.
3.Touch [
] button again to turn off the repeat
playback.
Using the Title Menu
On DVD discs containing two or more titles, you can
select from the title menu for playback.
1. Showing the DVD Video menu, touch [
] button
during playback.
• Each time you touch the button, you can switch
among audio languages.
• It may take time to switch among audios.
Depending on the disc, up to 8 kinds of audios may
be recorded. For details, see the mark of the disc:
(
Indicates that 8 audios have been recorded).
When the power is turned on and when the disc
is changed to a new one, the language set as the
factory default is selected. If that language has not
been recorded on disc the language is specified on
the disc.
Depending on the disc, switching may be
completely impossible or impossible on some
scenes.
Switching Subtitles
On DVD discs in with two or more subtitle languages
have been recorded, you can switch among the
subtitle languages during playback.
1.Showing the DVD Video menu, touch [
] button
to select a subtitle during playback. Each time you
touch the button, you can switch among subtitles.
• It may take time to switch among subtitles.
Depending on the disc, up to 32 kinds of subtitles
may be recorded. For details, see the mark of the
disc: ( Indicates that 8 kinds of subtitles have
been recorded).
Depending on the disc, switching may be
completely impossible or impossible on some
scenes.
2.To turn off subtitles, repeat touching [
] button
until subtitles are turned off.
Displaying the playback status
Touch [
] button on DVD Player mode screen,
Playback status is displayed on screen.
1.Showing the root menu of DVD Video, touch [
]
button during playback.
Touch and hold it during playback to show the title
menu.
* Depending on the disc, the title or root menu may
not be called.
2.Touch the title or root menu screen. And touch the
Show Cursor button.
3.Select the items in the title or root menu screen by
directional buttons.
* Depending on the disc, items may not be selected
with the directional buttons.
] button to fix on the selected item.
4.Touch [
] button.
5. Touch [
Switching Audio
On discs in which two or more audios or audio
languages have been recorded, you can switch among
the audio languages during playback.
18
NX404E
Play MP4/DivX video files
This system can play video files (AVI/MP4, etc.) stored
on disc.
Note:
DivX Certified® to play DivX® video, including premium
content.
Showing video files Player mode screen
1.After disc with video files is loaded, touch [Disc
Video] button on MAIN MENU to show video files
player mode screen.
2.Touch the screen of the playing video file to display
Video files player menu touch the screen again to
return the playback screen. The display will return to
the playback screen, if you do not touch the screen
for 10 seconds.
8
9
7
Skip using seek bar
E nglish
English
Touch the triangle on seek bar and drag it to any
position where you want to start playback.
Fast Forward /Fast Backward
Note:
1
2
3
4
5
6
*No audio is reproduced during fast forward and fast
backward operation.
*The fast forward and fast backward speed may differ
depending on the disc.
Repeat Playback
This operation plays back video files recorded on the
disc repeatedly.
The repeat set as the factory default is Repeat all.
]
1.Showing the video files player menu, touch [
button.
2.Touch [
] button once for Repeat Track, again
for Repeat Folder.
3.Touch [
] button again for Repeat All.
10
11
12
13
1 - Option button
2 - Previous Track /Fast Backward button
3 - Play/Pause button
4 - Next Track/Fast Forward button
5 - Elapsed playing time /Seek bar
6 - List Mode button
7 - System time
8 - Bluetooth status indicator
9 - Playback information
10 - Shortcut button
11 - Repeat button
12 - Audio button
13 - Subtitle button
Operate the Video files Player Menu
You can select the button items displayed in the Video
files player menu by directly touching it.
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Switch to Previous/Next File
1.Touch [ ] or [ ] button during playback to play
previous /next file
Switching Audio
Some video files will have two or more audio channels;
you can switch among the audio channels during
playback.
1.Touch [
] button during playback.
• Each time you touch the button, you can switch
among audio languages.
• It may take time to switch among audios.
Depending on the disc, switching may be impossible.
Switching Subtitles
Some video files will have two or more subtitles have
been recorded; you can switch among these subtitles
during playback.
1.Touch the [
] button to select a subtitle during
playback.
• Each time you touch the button, you can switch
among subtitles.
• It may take time to switch among subtitles.
Depending on the disc, switching may be impossible.
Video Files List
Showing the Video files player menu; touch the
[
] button to display video files list screen.
Video files list operations is almost same as Disc Audio
player mode. Please refer to CD Player Operations.
Play DivX Video-On-Demand File
You must complete a one-time registration process
in order to play a purchased DivX movie on your DivX
device.
NX404E
19
Owner’s Manual
1.Touch [ ] or [ ] button and hold 2 seconds to
start fast backward or fast forward during playback.
The playback speed starts at 2x, then will increase
to 4x, 8x, and 16x. Release the button will continue
playback with normal speed.
English
Registration is not needed to play free DivX movies
you create or download.
Getting DivX Registration Code and
Registering Your Device
Owner’s Manual
1.Touch the [Settings] button on the Main Menu to
access [General] setup menu.
2.Touch [General] setup button, and touch [DISPLAY]
button on the right side of “DivX® Registration”.
You will find “10 digit DivX registration code on the
screen.
3.Enter this code in DivX Player to create a
“Registration video” disc on your PC. Once this
“Registration video” disc has played on this device,
registration is done, and you can enjoy some
purchased DivX movies on your device.
For detail please visit “http://www.divx.com/vod”
4.Touch [OK] to close the pop-up window.
Note:
After you register your device, this setting menu is
changed to “DivX® Deregistration”
Deregister your device
Even after you have finished registration, you
can deregister your device if you will not watch
purchased movies on this device anymore.
1.Touch the [Settings] button on the Main Menu to
access [General] setup menu.
2.Touch [General] setup button, and touch [SET]
button on the right side of “DivX® Deregistration”.
You will be asked if you want to deregister this
device, then touch [YES] in the pop-up screen.
3. Note 10 digit “Deregistration code” in the pop-up
screen. Keep this code until you deregister this
device on your PC.
20
NX404E
4. Deregister this device by using the “Deregistration
code” on your PC.
For detail please visit “http://www/divx.com/vod”
Playable Disc Video Formats
This system can play video files stored on disc.
*.avi files
• format: Divx 4/5/6
• Picture size: 720 x 480
• Audio format: MP3
• Audio sampling frequency: 32/44.1/48 KHz
*.mp4 files:
• format: MPEG4 Visual Simple @L1
• Picture size: 720 x 480
• Audio format: AAC
• Audio sampling frequency: 32/44.1/48 KHz
*.mpg files
• format: MPEG2
• Picture size: 720 x 480
• Audio format: MP3
• Audio sampling frequency: 32/44.1/48 KHz
*.divx files
• format: Divx 3.11/4/5/6
• Picture size: 720 x 480
• Audio format: MP3
• Audio sampling frequency: 32/44.1/48 KHz
16 - Song Title
17 - Artist/album Information
18 - Close option menu button
Showing CD Player Mode Screen
Operate the CD Player Menu
1.After disc is loaded, the play mode is automatically
engaged.
2.If disc have been loaded you can touch [Disc Audio]
button on main menu to display CD player mode
screen.
You can select the button items displayed in the CD
player menu by directly touching it in list.
8
6
5
4
9
12
1
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Switch to Previous/Next file or track
7
10
Owner’s Manual
Please refer to Disc Video Player Operations -watching
to a disc and Ejecting a disc.
E nglish
Listening to a Disc/Ejecting a Disc
English
8. CD PLAYER OPERATIONS
Touch [ ] or [ ] button during playback to play
previous /next file.
• Touching [ ] button starts playback from the
beginning of the next track.
• Touching [ ] button starts playback from the
beginning of the current track. When this button is
touched again within 5 seconds, playback starts
from the beginning of previous track.
Fast Forward /Fast Backward
11
2
3
16
1.Touch [ ] or [ ] button and hold more than
2 seconds to start fast backward or fast forward
during playback. The playback speed starts at 2x,
then will increase to 4x, 8x, and 16x. Release the
button will continue playback with normal speed.
Note:
* The fast forward and fast backward speed may differ
depending on the disc.
13
14
15
Repeat Playback
* The repeat set as the factory default is Repeat All.
Touch [ ] button switch between Repeat Folder
Repeat All and Repeat Track.
18
17
1 - Option button
2 - Elapsed playing time indicator
3 - Rotation effect
4 - Page turning button
5 - System time
6 - Bluetooth status indicator
7 - Repeat button
8 - Previous Track /Fast Backward button
9 - Shortcut button.
10 - Play/Pause button
11 - Next Track/Fast Forward button
12 - Shuffle button
13 - Direct Searching button
14 - Scan Start/Stop button
15 - Rotation Effect On/Off button
Shuffle Playback
1. Touch [ ] button to shuffle the tracks during
playback.
2. Touch this button again to turn off the feature.
Selecting a track on the Track List Screen
This function allows you to select tracks from a
displayed list.
1.Touch the track title on the display list. The selected
track will start playing.
2.When the desired track is not displayed, touch and
flick the track list up or down.
3.Touch the desired track title button. The
corresponding track is started playback.
NX404E
21
Scanning the Tracks
English
Owner’s Manual
1.Touch [ ] button to show [Scan
] button.
] button during playback.
2.Touch [Scan
• It will play from next track, and each track will
display for 10 seconds.
] button will switch to [Scan
]
• The [Scan
button.
3.Touch [Scan
] button.
• It will continue playback from current track.
] button will switch to [Scan
]
• [Scan
button.
* The function will scan all tracks orderly in current
folder once. After Scan stopped playback will
continue.
Searching with the Track Number
This operation allows searching using the track
numbers recorded on the CDs.
1. Touch [ ] button to show [
] button.
] button .The numerical keypad will
2. Touch [
appear on the screen and touch [
] button.
3. Input the track number that you want to play back
with [0] to [9] button and touch [OK] button.
Playback starts from the track of the input track
number.
• If the input track number does not exist or searching
with track number is not allowed, the screen image
will not change.
• Touch the [
] button will close the numerical
keypad.
• Touch [ ] button will close the option window and
display playback screen.
Rotation Effect On/Off
This operation allows turn on/turn off rotation effect.
The factory default is On.
1.Touch [ ] button to show [Rotation effect] button
] button, will turn on the Rotation
2.Touch [
effect.
3.Touch [
] button, will turn off the Rotation effect.
Listening to Compressed Audio
This system can play audio files stored on disc.
MP3/ WMA/ AAC
Tag Display Function
This unit is an ID3 Tag compatible model.
22
NX404E
This unit supports the ID3 TAGs of the Version 2.4, 2.3,
1.1 and 1.0.
In displaying, this unit gives priority to the Version 2.3
and 2.4 TAGs.
Note:
• Some CDs recorded on CD-R/RW mode may not be
usable.
Displaying MP3/WMA/AAC TAG titles
Tag information can be displayed for compressed
audio file containing Tag information.
MP3: title, artist, album
WMA: title, artist
AAC: can not display tag information.
Precautions when creating MP3 disc
• File extensions
1.Always add a file extension “.MP3” or “.mp3” to
an MP3 file, and “.WMA” or “.wma” to a WMA and
“.m4a” to a AAC file by using single byte letters.
If you add a file extension other than specified or
forget to add these file extension, the file cannot be
played. In addition, if you use upper case and lower
case letters (capital and small letters) mixed for file
extensions, normal play may not be possible.
2.Files other than MP3/WMA/AAC data cannot be
played.
Playing files with a format not supported will be
skipped, and the scan, random and repeat playback
mode may be canceled.
• File and Disc Not Supported
Files and discs with following extensions are not
supported: *.AAC, *.DLF, *.M3U, *.PLS, *.MP3 PRO
files, files with DRM, open session discs.
• Logical format (File system)
1.When writing an MP3/WMA/AAC file on a disc,
please select “ISO9660 level 1 or level 2 (without
including expansion format)” as the writing software
format. Normal playback may not be possible if the
disc is recorded on another format.
2.The folder name and file name can be displayed as
the title during MP3/WMA/AAC play .
• Entering File and Folder Names
Names using the code list characters are the only
file names and folder names that can be entered and
displayed. Using any other character will cause the file
and folder names to be displayed incorrectly.
• Folder structure
1.A disc with a folder having more than 8 hierarchical
levels will conflict with the ISO9660 and playback
will be impossible.
• Number of files or folders
1.The maximum allowable number of folders is 200
(including root directory); the maximum allowable
number of files is 1500 (max. 200 per folder). This
represents the maximum number of tracks that can
be played back.
E nglish
English
2.Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always be
played in the order displayed on the PC).
• Some noise may occur depending on the type of
encoder software used while recording.
• In case of a track recorded at VBR (variable bit rate),
the display for the play time of the track may be
slightly different from the actual play time. Also, the
recommended value of VBR ranges from 32 kbps to
320 kbps.
• After disc selection, the play mode is automatically
engaged.
Owner’s Manual
Playback MP3/WMA/AAC menu
1
2
1.Repeat Playback
button can
While playing MP3/WMA/AAC touch
switch between Repeat Folder, Repeat All and Repeat
Track, Repeat Folder and Repeat All.
2.Current Folder
• Showing title of current folder.
• The number on the folder symbol is the number of
files and folders number in current folder.
• Touch the title of current folder, play list will show
files and folders in upper folder.
*Other operations about playing MP3/WMA/AAC are
almost same as CD Player mode.
Stop Playback
] button to stop playback.
1.Touch [
] button again to resume playback.
2.Touch [
Playback resumes from start of the folder which
playing track is in.
•Other operations about playing MP3/WMA/AAC are
almost same as CD Player mode.
NX404E
23
English
9. USB AUDIO OPERATIONS
Owner’s Manual
This system can play audio files (MP3/WMA/AAC/
FLAC) stored in an USB memory which is recognized
as “USB Mass Storage Class device”. You can use
your USB memory as an audio device by simply
copying desired audio files into it.
Note:
•This system will not operate or may operate improperly
with some USB memory.
•Files protected with any DRM cannot be played.
Notes on Using USB Memories
General notes
• When no support files, the file list display nothing.
Notes on the Audio files
• This system can play the MP3/WMA/AAC/FLAC files
stored in the USB memory.
MP3 files:
• format: MPEG1/2 Audio layer3
• bit rate: 8k ~ 320kbps
• sampling frequency: 8/12/16/24/32/44.1/48KHz
• file extension: . mp3
WMA files:
• format: Windows media Audio standard L3
profile
• bit rate: 32 ~ 192KHz
• sampling frequency: 32/44.1/48 KHz
• file extension: .wma
AAC files
• format: Advanced Audio Coding LC-AAC,HEAAC
• sampling frequency: 32/44.1/48 KHz
• file extension: . m4a
FLAC files
• format: Free Lossless Audio Codec
• quantization bit rate: 16 or 24 bits
• sampling frequency: 44.1~192 KHz
• file extension: . flac
Notes on the folder structure
• The folder hierarchy must be within 8 hierarchical
levels. Otherwise, playback may be impossible.
• The maximum allowable number of folders is 65535
(including root directory and folders with no MP3
files, WMA AAC/FLAC file).
• The maximum allowable number of files in a folder
is 65535.
• You can store the MP3 files, WMA AAC/FLAC
together in a folder.
• The system may become slow if the files or folders
exceed the limitation above.
Notes on the Tag titles
24
NX404E
The limitations on the Tag titles are same as those in
CD Player mode.
Select USB Audio Mode
Connect your USB memory with MP3 files, WMA AAC/
FLAC files to the USB connector. The system will
automatically detect the connected device, and the
[USB Audio] button on main menu will be enabled.
• When an USB memory is already connected
Touch [USB Audio] button to select the USB Audio
mode.
The system changes to the USB Audio mode and
starts playback from the previous position or from the
beginning.
This system has two USB connectors and can connect
two USB.
The volume label of the USB is indicated on the list of
USB root menu.
And you can select the desired USB by touching the
list.
If there is no information of the volume label of the
USB. This system indicate the USB as “My USB1”,
“My USB2” on the list.
Note:
If you reconnect the same device that you disconnected
last, the system will play back where it left off.
12
13
14
11
10
7
15
16
17
9
1
3
2
5
18
19
1. Option button
2. Play/Pause button
6
4
8
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Switch to Previous/next file
Touch [
] or [ ] button during playback to play
previous /next file.
• Touching [ ] button starts playback from the
beginning of the next track.
• Touching [
] button starts playback from the
beginning of the current track; when this button is
touched again within about 5 seconds, playback
starts from the beginning of previous track.
Fast Forward /Fast Backward
Touch [
] or [ ] button and hold more than
2 seconds to start fast backward or fast forward
during playback. The playback speed starts at 2x,
then will increase to 4x, 8x, and 16x .Release the
button will continue playback with normal speed.
Note:
*The fast forward and fast backward speed may differ
depending on the audio files.
Repeat Playback
* The repeat set as the factory default is Repeat All.
Touch the [ ] button once for Repeat Track, again for
Repeat Folder, Repeat All.
Select a Folder on Display List
Touch the folder title on the display list, the display list
will display files and folders in selected folder.
Select a Track on the Display List
This function allows you to select tracks from a
displayed list.
1.Touch the track title on the display list. The selected
track will start playing.
2.When the desired track is not displayed, touch and
flick the track list up or down.
3.Touch the desired track title button. The
corresponding track is started playback.
Scanning the Tracks
1.Touch [ ] button to show [Scan
] button.
] button during playback.
2.Touch [Scan
• It will play from next track, and each track will
display for 10 seconds.
• The [Scan
] button will switch to [Scan
]
button.
3.Touch [Scan
] button.
• It will continue playback from current track.
] button will switch to [Scan
]
• [Scan
button.
* The function will scan all tracks orderly in current
folder once .After Scan stopped playback will
continue.
Searching With the Track Number
This operation allows searching to use the track
numbers in playing folder.
1.Touch [ ] button to show [
] button.
] button .The numerical keypad will
2.Touch [
appear on the screen.
3.Input the track number that you want to play back
with [0] to [9] button and touch [OK] button.
Playback starts from the track of the input track
number.
• If the input track number does not exist or searching
with a track number is not allowed, the screen image
will not change.
• Touch [
] button will close the numerical keypad.
• Touch [ ] button will close the option window and
display playback screen.
Shuffle Playback
1.Touch [ ] button to shuffle the tracks in playing
folder during playback.
2.Touch this button again to turn off the feature.
Album Art work
If current audio file contains album art image in ID3,
the picture will be displayed in this area.
ID3 Information Area
This area display ID3 info of playing file: song title,
artist information, album information, number of
current file/total number in current folder, elapsed
playing time/total time of current file.
NX404E
25
English
Touch
on seek bar and drag it to any position where
you want to start playback.
Owner’s Manual
Playing Audio Files in USB Memory
Skip Using Seek Bar
E nglish
3. Previous Track /Fast Backward button
4. Next Track/Fast Forward button
5. Repeat button
6. Shuffle button
7. MP3 files, WMA files in list
8. Folders in list
9. Page Turning button
10. System time
11. Bluetooth status indicator
12. Mute status indicator
13. Playback status information
14. Album Art
15. Shortcut button
16. Current ID3 info area
17. Elapsed playing time indicator/Seek bar
18. Direct button
19. Scan button
English
10. USB VIDEO OPERATIONS
Owner’s Manual
This system can play USB video files (MP4, 3GP etc.)
stored in an USB memory which is recognized as
“USB Mass Storage Class device”. You can use your
USB memory as an video device by simply copying
desired video files into it.
Note:
• This system will not operate or may operate improperly
with some USB memory.
• Files protected with any DRM cannot be played.
Notes on Using USB Memories
General notes
When no support files, the file list display nothing.
Notes on the folder structure
The limitations on the folder structure are same as
those in USB Audio Player mode.
Notes on the Tag titles
The limitations on the Tag titles are same as those in
CD Player mode.
Select USB Video Mode
Connect your USB memory with video files to the USB
connector. The system will automatically detect the
connected device, and the [USB Video] button on
main menu will be enabled.
• When an USB memory is already connected
Touch [USB Video] button on main menu to select the
USB Video mode.
The system changes to the USB Video mode and
starts playback from the previous position or from the
beginning.
Playable Video Formats
*.mp4 files
• format: MPEG4 Visual
MPEG4 AVC (H.264)
• Picture size: 1280 X 720 (MPEG4 Visual)
1920 x 1080 (MPEG4 AVC)
• Audio format: AAC
• Audio sampling frequency: 32/44.1/48 KHz
*.m4v files
• format: MPEG4 Visual
MPEG4 AVC (H.264)
• Picture size: 720 x 480
• Audio format: AAC
• Audio sampling frequency: 32/44.1/48 KHz
*.mpg files
• format: MPEG2
• Picture size: 720 x 480
• Audio format: MP3
• Audio sampling frequency: 32/44.1/48 KHz
*.3gp files
• format: MPEG4 Visual
H.263
• Audio format: AAC, AMR
• Audio sampling frequency: 8/16/32/44.1/48 KHz
9
8
7
10
Note: If you reconnect the same device that you
disconnected last, the system will play back where it
left off.
This system has two USB connectors and can connect
two USB.
The volume label of the USB is indicated on the list of
USB root menu.
And you can select the desired USB by touching the list.
If there is no information of the volume label of the USB,
this system indicates the USB as “My USB1”, “My
USB2” on the list.
Playing Video Files in USB Memory
If the video is playing, touch the screen of the playing
video to display Operation buttons.
* The display will return to the playback screen, if you
do not touch the screen for 10 seconds.
1
NX404E
3
4
5
1 - Previous Track /Fast Backward button
2 - Play/Pause button
3 - Next Track/Fast Forward button
4 - Elapsed playing time indicator/Seek bar
5 - Menu List
6 - Repeat button
7 - System time
8 - Bluetooth status indicator
9 - Playback information
10 - Shortcut button
Play/Pause Playback
1.Touch [
26
2
] button to Pause playback.
6
] button to resume playback.
Repeat Playback
* The repeat set as the factory default is Repeat All.
] button once for Repeat Track, again
Touch the [
for Repeat Folder, again for Repeat All.
Skip Using Seek Bar
Touch the
on seek bar and drag it to any position
where you want to start playback.
Switching to USB Video Menu
Touch [
] button playback will be paused, and the
screen will switch to USB Video List.
11
10
9
8
Owner’s Manual
Touch [ ] or [ ] button during playback to play
previous /next file.
• Touching [ ] button starts playback from the
beginning of the next track.
• Touching [ ] button starts playback from the
beginning of the current track; when this button is
touched again within about 5 seconds, playback
starts from the beginning of previous track.
11 - Playback status information
12 - Album Art
13 - Shortcut button
14 - Current file information area
15 - Elapsed playing time indicator/Seek bar
16 - Direct button
17 - Scan button
E nglish
Switch to Previous/next file
English
2.Touch [
Play/Pause Playback
*On USB Video menu screen, playback status is
pause.
Touch [
] button to resume playback. The screen
will go to video screen automatically.
Switch to Previous/next file
Touch [
] or [
] button during playback to play
previous /next file.
• Touching [
] button starts playback from the
beginning of the next track.
• Touching [
] button starts playback from the
beginning of the current track; when this button is
touched again within about 5 seconds, playback
starts from the beginning of previous track.
Repeat Playback
* The repeat set as the factory default is Repeat All.
Touch the [ ] button once for Repeat Track, again for
Repeat Folder, again for Repeat All.
12
Shuffle Playback
13
15
1.Touch [ ] button to shuffle the tracks in playing
folder during playback.
2.Touch this button again to turn off the feature.
3
Current File Information Area
14
1
2
5
6
4
7
This area displays information of current video file: file
name, number of current file/total number in current
folder, Elapsed playing time/total time of current file.
Skip Using Seek Bar
16
Touch
on seek bar and drag it to any position
where you want to start playback.
17
Select a Folder on Display List
This operation is same as this in USB Audio mode.
Selecting a Track on the Display List
This operation is same as this in USB Audio mode.
Scanning the Tracks
1 - Option button
2 - Play/Pause button
3 - Previous Track /Fast Backward button
4 - Next Track/Fast Forward button
5 - Repeat button
6 - Shuffle button
7 - Video files in list
8 - System time
9 - Bluetooth status indicator
10 - Mute status indicator
This operation is same as this in USB Audio mode.
Searching with the Track Number
This operation is same as this in USB Audio mode.
NX404E
27
English
11. iPod OPERATIONS
Owner’s Manual
iPod/iPhone can be connected by using the
connector cable supplied with the iPod/iPhone, but in
this case, you can enjoy its audio sound only. To enjoy
video movies stored in the iPod/iPhone with video
displaying them on this unit, it is required to use the
special connector cable (CCA-750) separately sold.
However the new products such as iPhone 5, iPhone
5s and iPhone 5c, iPod touch® (5th generation) and
iPod nano® (7th generation) only can connect 10-pin
cable (no video signal output),so these new products
cannot displaying video in video mode.
or internet radio other than iPod, there is a case that
iPod doesn’t playback correctly. Please don’t operate
the audio payer or internet radio other than Pandora
when the Pandora mode.
4. During iOS device is connected by Bluetooth, and
select the iPod mode, the volume level is controlled by
only iOS device.
5. During iOS device is connected by Bluetooth, Album
jacket image is not displayed.
Note:
• This system will not operate or may operate improperly
with unsupported versions.
• For detailed information on the playable iPod/iPhone
models, see our home page: www.clarion.com
Notes on using Apple iPod/iPhone
• Do not connect an iPod/iPhone to this unit with a
headphone connected to the iPod/ iPhone.
• After the iPod/iPhone has been connected to this
unit, the buttons of iPod buttons are disabled for
operation in the Music mode. In the Video mode, do
not operate the buttons of iPod.
• When in the iPod mode, the screen image input
from the AUX terminal is output to the rear monitor.
• When no data is present, the title display will remain
blank.
• Set the language setting of iPod/iPhone to English
before connecting your iPod/iPhone. Some
characters of the other languages may not be
displayed correctly in this system.
The playback starts after a while, from where the iPod/
iPhone has been paused.
• When iPod/iPhone is already connected
] button on the Main Menu
Touch the [
screen. The system changes to the iPod mode, and
starts playback from the previous position.
Press MENU button on Operational Panel to return to
the Main Menu.
iPod Audio ID3 Info
12
11
10
• Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when the
internal battery of iPod/iPhone has run down, this
function may not operate correctly. You must connect
the iPod/iPhone after charging the battery if it has run
down.
13
iPod Audio Menu Operations
15
Connect your iPod/iPhone to the USB connector.
The system will automatically detect the connected
device and the iPod Audio button will be enabled for
operation on the Main Menu screen.
4
Note:
1.This system has two USB connectors, please
connect to the USB with the label of “iPod/iPhone”.By
connecting another USB cable, iPod/iPhone can’t play
back the music.
2.When iOS device is connected via both USB and
Bluetooth at the same time and select iPod mode, iOS
device is controlled by USB connecton.
3. When the iPod mode and operate the audio player
28
NX404E
9
14
1
2
5
3
6
7
1 - Option button
2 - Repeat button
3 - Shuffle button
4 - Previous Track /Fast Backward button
5 - Play/Pause button
6 - Next Track/Fast Forward button
7 - ID3 Information
8
iPod Audio Playlist Mode Screen
English
] button
E nglish
1
Owner’s Manual
8 - Next Page[
] / Previous Page[
9 - Category List
10 - System Time
11 - Bluetooth Status indicator
12 - Playback Status indicator
13 - Art Work
14 - Shortcut button
15 - Progress bar
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Switch to Previous/next file
• Touch [ ] or [ ] button during playback to play
previous /next file.
• Touching [ ] button starts playback from the
beginning of the next track.
• Touching [ ] button starts playback from the
beginning of the current track; when this button is
touched again within about 5 seconds, playback
starts from the beginning of previous track.
2
3
1 - Switch to Information button
2 - Playing List
3 - Page turning button
4
5
Fast Forward /Fast Backward
Touch [ ] or [ ] button and hold more than 2
seconds to start fast backward or fast forward during
playback.
Note:
*No audio is reproduced during fast forward and fast
backward operation.
*The fast forward and fast backward speed may differ
depending on the audio files.
Repeat Playback
* depend on iPod.
] button once for Repeat Track, again
1.Touch the [
for Repeat All.
Shuffle Playback
1.Touch [
] button to shuffle the tracks in playing
folder during playback.
2.Touch this button again to turn off the feature.
Album Art work
If current audio file contains album art image in ID3,
the picture will be displayed in this area.
ID3 Information Area
This area display ID3 info of playing file: song title,
artist information, album information (Genre, playlist
and release time).
6
4 - Back to father folder
5 - Close the list mode
6 - Search with the first alphabet in current list
iPod Audio List Mode Screen
• In the ID3 information mode screen, touch the ID3
info area to switch the playing list, and in the playing
list mode screen, touch the button [ ] can back to
the father folder. If the list is in root, touch it can
close the list.
• Touch the button[ ] to back to the father folder. If
the list is in root, touch it can close the list.
• Touch the button [ ] to close the List and back to
the ID3 information mode.
Category List
Select different category songs to play. The
category is same as the iPod/iPhone.
NX404E
29
Simple Control Mode
previous track.
English
Note: In Simple Control Mode, the best way is to control
the iPod just on iPod.
1
Selecting a list item from a list screen
Owner’s Manual
(1). Touch the list screen and flick up or down to scroll
the list.
(2). Touch a desired list item on the screen to display
the corresponding list of tracks.
(3). Touch the desired track name on the list to play it.
2
1 - Simple Control button
2 - Video Mode button
] in option menu,
• If the Simple Control is set to [
the screen will become Simple Control Mode. It can
also display the video of iPod/iPhone regardless it
is iPod Audio or iPod Video mode. But only
“Previous Track”、“Play/Pause” and “Next Track”
can be operated.
]the video will play from iPod.
• Touch [
Skipping a Track (Simple Control Mode)
Touch the [ ] or [ ] button during playback. Tracks
are skipped, as many times as the button is touched,
and playback starts.
• Touching the [ ] button, starts playback from the
beginning of the next track.
• Touching the [ ] button, starts playback from the
beginning of the current track.
When this button is touched again within about 5
seconds, playback starts from the beginning of the
30
NX404E
10 - Bluetooth Status indicator
11 - Playback Status indicator
12 - Art work
13 - Shortcut button
14 - Progress bar
E nglish
Connect your iPod/iPhone to the USB connector.
The system will automatically detect the connected
device and the iPod Video button will be enabled for
operation on the Main Menu screen.
English
iPod Video Menu Operations
Owner’s Manual
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Switch to Previous/Next File
• When an iPod/iPhone is already connected
] button on the Main Menu
Touch the [
screen. The system changes to the iPod Video mode,
and starts playback from the previous position.
Touch MENU button on Operational Panel to return to
the Main Menu.
• Viewing video data in the iPod/iPhone (only for the
iPod/iPhone with video features)
When you connect an iPod/iPhone with video features
by using the optional connector cable for iPod/iPhone
with video, you can enjoy the video data and slide
show data stored in the iPod/iPhone and show them
on the display of this unit (and the rear monitor if
connected).
10
Repeat Playback
* The repeat set as the factory default is depend on
iPod/iPhone.
] button once for Repeat One, again
1.Touch the [
for Repeat All, again for Repeat Off.
Album Art work
If current audio file contains album art image in ID3,
the picture will be displayed in this area.
ID3 Information Area
The area is display the title of the playing file.
Category List
iPod Video ID3 Mode Screen
11
• Touch [ ] or [ ] button during playback to play
previous /next file.
• Touching [ ] button starts playback from the
beginning of the next track.
• Touching [ ] button starts playback from the
beginning of the current track.
Select different category songs to play. The
category is same as the iPod/iPhone.
9
iPod Video List Mode Screen
12
13
7
14
3
1
2
4
5
6
8
1 - Option button
2 - Repeat button
3 - Previous Track button
4 - Play/Pause button
5 - Next Track button
6 - Playing File Title
7 - Category list
8 - Next Page[
9 - System time
] / Previous Page[
This operation is same as this in iPod Audio mode.
] button
NX404E
31
English
iPod Video Simple Control Mode Screen
beginning of the next track.
• Touching [ ] button, starts playback from the
beginning of the current track; when this button is
touched again within about 5 seconds, playback
starts from the beginning of previous track.
beginning of the current track.
Fast Forward /Fast Backward
Owner’s Manual
Touch [ ] or [ ] button and hold more than 2
seconds to start fast backward or fast forward during
playback. Release the button will continue playback
with normal speed.
Note:
*No audio is reproduced during fast forward and fast
backward operation.
*The fast forward and fast backward speed may differ
depending on the audio files.
Repeat Playback
* The repeat set as the factory default is Repeat Off.
] button once for Repeat One, again
Touch the [
for Repeat All, again for Repeat Off.
This operation is same as this in iPod Audio mode.
iPod Video Play Mode Screen
9
1
8
2
3
4
5
7
6
1 - Previous Track /Fast Backward button
2 - Play/Pause button
3 - Next Track/Fast Forward button
4 - Progress bar
5 - Menu List button
6 - Repeat button
7 - System time
8 - Bluetooth status indicator
9 - Playback information
Play/Pause Playback
1.Touch [
2.Touch [
] button to pause during playback.
] button again to resume playback.
Switch to Previous/Next Track
• Touch [ ] or [ ] button during playback to play
previous /next track.
• Touching [ ] button, starts playback from the
32
NX404E
Note:
The operation in iPod video mode are as same as iPod
Audio mode. Please refer to the iPod Audio Mode
operation.
Note:
Video playback is not available on all iPod/ iPhone
devices. Please contact your Clarion dealer for details.
An optional connection cable or accessory may be
required for this feature.
Note:
• “AUDIO ONLY” is displayed when the automobile is
moving.
• Image data may not be played back according to the
status of the iPod/iPhone
• The volume setting of video data is relatively lower than
audio data. Be sure to lower the volume setting before
switching to the other mode.
• Do not select the categories with no track registered
from the iPod menu screen. The iPod/iPhone may be
frozen. If the iPod/iPhone is frozen, reset the iPod/
iPhone by following the procedure described in the
instruction manual of the iPod/iPhone.
• Audio may be played back slightly out of
synchronization with video images.
iPod Audio Bluetooth Mode
When your iPod/iPhone have connected via bluetooth
to this unit, you can also enter iPod Audio mode. The
operation is same as the normal iPod Audio mode.
12. Bluetooth AUDIO PLAYER OPERATIONS
•For detailed information on the playable Bluetooth
audio players, see our home page: www.clarion.com
You can register up to 5 Bluetooth audio players.
Your mobile phone Bluetooth version is under 2.0.
Please input PIN code “0000”.
1.Turn on the power of the Bluetooth audio player you
wish to register.
2.Touch the Device button [ ] to display the Device
Select screen.
Selecting the Bluetooth Audio Mode
1. Touch the [Bluetooth Audio] button to select the
Bluetooth Audio mode.
The system changes to the Bluetooth mode. If the
connection with a Bluetooth audio player has been
already established, you may select the Music
function.
2. Touch MENU button on Operational Panel to return
to the Main Menu.
• When the connection with blue icon a Bluetooth
audio player has been established, the [ ] icon is
displayed at the top of the screen.
3.Touch the [
screen.
] button to display the Inquiring Device
Bluetooth Audio Player Settings
You can confirm various information concerning about
the Bluetooth Interface features.
1.Touch the [ ] button to display the information on
the screen.
2.When you finish confirming the Bluetooth
information, touch the [ ] button to return to the
previous screen.
4.Touch your desired device button and touch [
] button to register for the Bluetooth audio
player. Then select an image of this device.
NX404E
33
Owner’s Manual
Note:
•This system will not operate or may operate improperly
with some Bluetooth audio players.
Registering your Bluetooth audio player
(Pairing)
E nglish
Some Bluetooth cellular phones have audio features,
and some portable audio players support the
Bluetooth feature. These devices will be called as
“Bluetooth audio players” in this manual. This system
can play audio data stored in a Bluetooth audio player.
English
®
And select a type of this device.
English
Note:
• Occasionally, depending on the environment, playback
sounds may be fragmented, or switch noises may be
generated.
Playing a Music
Owner’s Manual
After the connection with a Bluetooth audio player is
established, the play mode is automatically engaged.
• When playback is not started for some devices,
touch the [
] button manually.
When the pairing operation completes, the registered
Bluetooth audio player is set as the current device,
after selecting the favorite icon, the display return to
the device list screen. Touch [
] button, the display
will return to the Bluetooth audio mode screen.
Pausing Playback
1.Touch the [
] button during playback.
Playback Pauses.
2.To resume playback, touch the [
Playback resumes.
] button.
Skipping a Track (searching)
3.Touch the [
] or [
] button during playback.
Stopping Playback
4.Touch the [
] button during playback.
] button to
Tracks are stopped, touch the [
playback the first Track.
Show Track List
• To delete the Bluetooth audio player registration
] button to delete the device.
1.Touch the [
A confirmation screen is displayed.
] button to confirm delete.
2.Touch the [
Selecting the Bluetooth Audio Player
To change the current Bluetooth audio player to the
other device which is already registered, perform the
following operation.
1.Touch the device button to [ ] display the Device
Select screen.
2.Touch the currently connected device button, then
touch the [
] button to disconnect the active
device.
3.Touch the desired device button you wish to use.
Touch [
] button to select it as your active
device. The corresponding cellular phone is set as
current telephone.
4.Touch the [
] button to return to the previous
screen.
Controlling the Bluetooth Audio Player
34
NX404E
5. Touch the [
] button to show the current track
list. Touch the [
] button to show all of the lists.
And you can playback any tracks by touch the items
in the list.
1.Touch the [
] button to display the information on
the screen.
2.Perform setting for the desired item. See the
following sections for detail.
3.When you finish confirming the Bluetooth
information, touch the [
] button to return to the
previous screen.
Note:
•Some cellular phones may not be able to transfer the
Phone Book data to head unit.
•The Phone Book data transmission may take a long
time. The operations of sending calls are disabled
during the data transmission.
Select the BT Phone Mode
1.Touch the [Bluetooth Telephone] button to select the
Bluetooth Telephone mode.
The Telephone screen is displayed.
2.Touch MENU button on Operational Panel to return
to the Main Menu.
• When no Bluetooth Telephone connected, the icon
[ ] is displayed at the top of the screen.
Setting Automatic Connection
The system automatically reconnects the cellular
phone after the connection is lost or the system is
restarted.
• The factory default setting is “ON”. Touch the
[
] or [
] button of the Automatic Connection
item to set the function ON or OFF.
Setting Automatic Answer
If a call comes in, answer automatically after
5 seconds.
• The factory default setting is “OFF”. Touch the
] or [
] button of the Automatic Answer item
[
to set the function ON or OFF.
Setting Microphone Gain
You can adjust the input level of the microphone in
16 levels.
• Touch the level indicator button of the Microphone
Gain item to adjust the input level.
• When the connection with a Bluetooth Telephone
has been established, the icon [ ] and signal level
indicator are displayed at the top of the screen.
Note:
• The input level of the microphone can be affected by
its surroundings. Adjust the level if the person on the
other end of the telephone has a reception problem.
Bluetooth Telephone Settings
You can confirm various information concerning about
the Bluetooth Interface features.
NX404E
35
Owner’s Manual
When the connection with your Bluetooth cellular
phone is established, the following functions are
available on this unit:
• Listening to your telephone calls on the car
speakers.
• Answering to an incoming call.
• Making a call using the Ten-Key pad screen.
• Making a call using the Phone Book data in the
selected cellular phone.
• Making a call using the History data of the dialed/
received calls.
English
®
E nglish
13. Bluetooth TELEPHONE OPERATIONS
English
Registering Your Cellular Phone
(Pairing)
Owner’s Manual
You can register up to 5 cellular phones. The
registering method is as same as “Registering your
Bluetooth audio player”.
Your mobile phone Bluetooth version is under 2.0.
Please input PIN code “0000”.
1.Turn on the power of the cellular phone you wish to
register.
] to display the Device
2.Touch the device button [
Select screen.
When the pairing operation completes, the
registered cellular phone is set as the current
telephone, and the display returns to the
Telephone screen.
• To delete the cellular phone registration
1.Touch the [
] button to delete the device.
A confirmation screen is displayed.
2.Touch the [
] button to confirm delete.
Select the Cellular Phone
3. Touch the [
Device screen.
] button to display the Inquiring
To change the current cellular phone to the other
device which is already registered, perform the
following operation.
1.Touch the [ ] button to display the Device Select
screen.
2.Touch the currently connected device, then touch
[
] button to disconnect the active device.
3. Touch the desired device button you wish to use.
Touch [
] button to select it as your active
device. The corresponding cellular phone is set as
the current telephone.
• If the power of the cellular phone is not turned on,
turn it on.
• The cellular phone may prompt to acknowledge the
Bluetooth connection or to enter the Pass Key code
of this unit. Perform these operations according to
the message displayed.
4.Touch the [
] button to return to the previous
screen.
Obtaining the Phone Book Data
Sending the Phone Book data from the cellular phone
enables you to make a call using the Phone Book
function from this unit.
4.Touch your desired Cellular button to select the
button for the cellular phone to be registered, and
touch [
] button to register for the Bluetooth
cellular phone.
• You cannot select the Cellular button of which
another cellular phone is already registered.
Select a blank Cellular button.
5. If entering the Pass Key code is prompted on your
cellular phone, enter the Pass Key code set in this
unit.
• You can change the Pass key setting of this
unit from the Bluetooth Info screen under the
Telephone Settings screen.
36
NX404E
Telephone Operations
Making a call using the Ten-Key pad
1.Touch the [ ] button to display the Ten-Key pad
screen.
2.Enter the telephone number by using the Ten-Key
pad displayed on the screen.
Note:
•Before using this function, the Phone Book data must
be sent from the cellular phone.
3.Touch the [
] (Send) button to call the entered
number.
• The following Telephone Interrupt screen is
displayed during phone call.
1.Touch the [
] button to display the Phone Book
screen.
2.Touch the desired name button you wish to dial.
• Flick the list up and down to scroll the list.
] button to call the specified
3.Touch the [
number. The Telephone Interrupt screen is
displayed, and calling starts.
• When the call is finished, touch the [
] button
to hang up.
Making a Call Using the History
• Touch the [ ] button to talk by using the cellular
phone and canceling the hands-free function
(Private Mode). To return to the hands-free mode,
touch the [ ] button again.
• Touch the [ ] button to mute the microphone.
Now you can hear the other side, but the other side
cannot hear your side.
• Touch the [ ] button to hold the current phone call,
now you can answer to the other incoming call.
Touch again to talk with previous call
If during a call with a third-party call, you can keep
the current call to answer a third party or hang up
the current call to answer a third party. You can also
ignore the third-party calls.
4.When the call is finished, touch [
hang up.
] button to
Note:
•Depending on some special cellular phone, the
Telephone Interrupt screen may be closed and the
connection with this system may be disconnected
when entering the Private mode.
The system will memorize the Dialed/Received calls
record data in the memory. You can confirm it and use
it to make a call from this unit.
1.Touch the [ ] button. The History List screen is
displayed.
• The items are sorted by Dialed, Missed and
Received calls.
• Flick the list up and down to scroll the list.
2.Touch the desired History item button you wish to
dial.
] button to call the specified
3.Touch the [
number. The Telephone Interrupt screen is
displayed, and calling starts.
• When the call is finished, touch the [
] button
to hang up.
Answering to an incoming call
When a call comes in, the following Telephone
Interrupt screen appears.
You can answer to the incoming call on this system by
the following operation.
1.Touch the [
] button to answer the call.
] button
2.When the call is finished, touch the [
to hang up.
NX404E
37
Owner’s Manual
•Only the Phone Book items with at least one telephone
number registered in the captured Phone Book data
are displayed on the Phone Book screen.
E nglish
You can use the Phone Book data obtained from the
cellular phone to make a call from this unit.
English
Making a Call Using the Phone Book
English
14. TUNER OPERATIONS
Owner’s Manual
Listening to the Tuner
Manual memory
1. Touch the Tuner button on the Main menu display.
The tuner mode screen is displayed.
2. Touch the [FM1/FM2/FM3/AM] button to select the
radio band. Each time the button is touched, the
radio reception band changes in the following order:
FM1->FM2->FM3->AM -> FM1...
1.Touch the desired band button to select the band
you wish to store.
2.Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3.Touch and hold the desired Preset button you want
to store for about 2 seconds.
11
10
9
8
7
5
12
6
4
13
1
2
3
1. Preset Scan button
2. Seek Down
3. Seek Up
4. Step Down
5. Step Up
6. Frequencies display
7. System time
8. Bluetooth status indicator
9. Preset list
10. DX/Local indicator
11. Band button
12. Shortcut button
13. Option button
Seek Tuning
1.Touch the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] button
• When Touch the [ ] button, the station is searched
in the direction of higher frequency.
• When Touch the [ ] button, the station is searched
in the direction of lower frequency.
Step Tuning
1.Touch the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2.Touch the [ ] or [ ] button in frequency menu to
tune up or down by one step.
Recalling a preset station
1.Touch the [FM1/2/3/AM] button to select the desire
band (FM or AM) on the tuner.
2.Touch the preset station (1 to 6) on Preset list.
38
NX404E
Auto Store
The Auto Store is a function for storing up to 6 stations
that are automatically searched in sequentially. If the
number of receivable stations cannot reach to 6, the
previous stored station remains.
1.Touch the [FM1/2/3/AM] button to select the
desired band. (FM or AM)
2.Touch the [ ] button, and then touch the [
]
button to start the Auto Store.
A beep sounds and the stations with good reception
are stored automatically to the preset list.
Notes:
1. After auto store, the previous stored stations will be
overwritten.
2. The unit has 4 bands, but FM3 and AM can store by
Auto Store function.
Preset Scan
The Preset Scan receives the stations stored in the
preset memory in order. This function is useful when
searching for the desired station in memory.
1.Touch the [FM1/2/3/AM] button to select the desired
band. (FM or AM)
2.Touch the [
] button to start the Preset Scan.
The unit starts scanning each station for 10 seconds
sequentially. But the station stored is not a valid
station; the scanning time is only 2 seconds.
3.When the desired station is tuned in, touch the
[
] button again to stay in that station.
DX/Local Setting
The DX / Local setting changes the tuner sensitivity in
order to separate closely spaced stations. This feature
is useful in areas that have many radio stations in
close proximity.
1.Touch the [
sensitivity.
2.Touch the [
sensitivity.
] button to switch to local tuner
] button to switch to DX tuner
Note:
For your safety, the unit has a safety function, which turns off the picture when car is moving, so only the audio can be
heard. The picture can be only watched, when the car is stopped and parking brake is applied.
Switching to DVB-T mode
• Touch [TV] key on Main Menu to select desired mode (when unit is reading). The LCD will display the external
video. If there is no DVB-T signal, it will show you blank screen.
• Press [Menu] button on Operational Panel to return to the Main Menu.
NX404E
39
English
Owner’s Manual
When TV device connect to unit, you can watch TV program and operate DVB-T device.
Different DVB-T device have different operate mode, please read the user manual of the DVB-T device connected
to unit.
This function is available when a DVB-T Black Box is connected.
This unit can control the following DVB-T Black Box: (DTX502E)
*DTX502E is sold separately.
E nglish
15. TV OPERATIONS
English
16. DAB OPERATIONS
Setting to DAB
Owner’s Manual
Before using DAB system, please set the adjust in
Settings.
Please select “DAB” in DAB/TV(Option) of Settings
toactivate DAB icon on Main menu.
Listening to the DAB
1.Touch the DAB button on the main menu display.
The DAB mode screen is displayed.
2.Touch the [DAB1/DAB2/DAB3] button to select the
DAB band. Each time the button is touched, the
DAB reception band changes in the following order:
DAB1->DAB2->DAB3->DAB1 -> DAB2...
Note:
1. DAB is not broadcast everywhere.
2. This content is optional. If you connect DAB unit,
you can use DAB feature.
3. DAB unit is sold separately.
13
12
11
8
4
5
6
You can tune to the Ensemble and select the Service
which is currently broadcast.
1. Touch the [ ] or [ ] button to tune to previous or
next ensemble station manually step by step.
2. Long touch the [ ] or [ ] button to seek and tune
to previous or next available ensemble station.
3. Touch [ ] or [ ] button to select and tune to
previous or next Service in current Ensemble.
Total number and the current service number of the
current Ensemble is displayed just below the Ensemble
frequency display, as in the way “1/16”.
1
3
Seek Tuning
Notes:
10
9
2
11. Service List display in each category (Preset / Ensemble / PTY)
12. Preset number/Channel number/Service number/
FM Link display
13. DAB band button
14. Srevice List Update button
15. Service Link Mode button
16. Software version display
7
14
15
16
1. DAB Information display
2. Option button(open/close)
3. Preset Scan button
4. Previous Ensemble/Seek button
5. Next Ensemble/Seek button
6. Previous Service in Current Ensemble button
7. Next Service in Current Ensemble button
8. List Page Down button
9. List Page Up button
10. Preset List/Service List Switch button
NX404E
40
Preset List/Service List Display
You can select the list from Preset List, Ensemble List or PTY List.
1. Touch the [
] button to select the list you want to display.
2. When you select “Preset”, the list area displays preset services for each DAB Band. If you touch service in the list, you can listen to respective service in this list. If you touch and hold in the list, you can store current service in this list.
Preset List will not be changed by Service Scan operation.
3. When you select “Ensemble”, the list area displays Ensemble list which were stored by Service Scan. By selecting each Ensemble in the list, it will show the Services in this Ensemble. If you select “ALL Service”, you can see all Services in all Ensembles. To go back to Ensemble list just touch “back” button.
4. When you select “PTY”, the list area displays PTY category list from NEWS, SPORT, CULTURE, POP and OTHERS. By selecting each PTY in the list, it will show the Services in this PTY category. To go back to Ensemble list just touch “back” button.
Note:
If you want to update the services in Ensemble list and
PTY list with current broadcasting, please perform
Service Scan.
Service Link Setting
4.When scanning the services, this image will display.
You can select Service Link mode from On or OFF.
If this setting is set to On, and current Service signal
gets weak, it is to be linked to the service with better
signal.
1.Touch the option button[ ] to open option menu
display.
1.Touch the [
] button to switch On or OFF.
Note:
If the service is linked to the FM station, the FM indicator
will be turned on.
Notes:
After service scan, currently available services will be
updated in the Ensemble List and PTY List.
DAB Band
When touch the DAB band button, the band will
change as below DAB1->DAB2->DAB3->DAB1···
NX404E
41
English
Preset Scan tunes to the Services stored in the preset list in order.
1.Touch the [DAB1/2/3] button to select the desired
band.)
2.Touch the [
] button to start the Preset Scan.
The unit starts scanning each service for playing 10
seconds sequentially.
3.When the desired service is tuned in, touch the[
]
button again to stay in that service.
Owner’s Manual
Preset Scan
When you want to update the list with the current
services in Ensemble List or PTY List, please perform
Service Scan.
1.Touch the option button [ ] to open option menu
display.
2.In Option Menu, touch the [Start] button.
3. Touch the [OK] button to start updating the service
list, touch the [Cancel] button to cancel this operation
then back to previous menu.
E nglish
Service Scan
English
17. HDMI MODE
Wire Connection of HDMI Mode
Owner’s Manual
iPhone 4/4S/5/5s/5c can be connected by using the connector cable
supplied with the iPhone 4/4S/5/5s/5c and HDMI cable (sold in the
market) or CCA-770 and digital Av adapter.
Note:
The following is part of the wiring example.
Depending on the device, there is a case to connect to the device directly with the CCA-771.
Depending on the adapter or device, there is a case that the audio noise and video noise is generated.
(1) Connection with the iPhone 4/4S
HDMI cable sold in the market or ★CCA-770
NX404E
Apple Genuine 30pin cable
iPhone 4/4S
Apple Genuine
30pin-Digital AV adapter
(2) Connection with the iPhone 5
HDMI cable sold in the market or ★CCA-770
NX404E
Apple Genuine Lightning TM
cable
Apple Genuine
Lightning-Digital AV adapter
(3) Connection with the Android Phone
Micro USB cable sold in the market
NX404E
HDMI cable sold in the
market or ★CCA-770
(4) Connection with the equipment with HDMI output
HDMI cable sold in the
market
NX404E
42
NX404E
MHL adaptor sold
in the market
Electronic devices with HDMI output
iPhone 5
E nglish
English
Select HDMI source
Owner’s Manual
When a device is connected for the first time.The
calibration will show up automatically.
This HDMI mode is only indicate the
screen of the iPhone, Android. Can‘t
operate by the touch screen of NX404E
Note:
Depending on the application and model of the
mobile phone, there is the case that black frame
appears around the screen.
NX404E
43
English
18. AUX
External peripheral devices, including a game console, camcorder, navigation unit, iPod/iPhone, etc. can be
connected to the AUX connector on the front or back of this unit using the A/V media cables.
Owner’s Manual
Switching to AUX IN
Touch [AUX1] /[AUX2] button on Main Menu to select desired mode (when unit is reading). If the external device
connected to AUX input have audio signal, the unit will broadcast audio of external device. Touch Menu button on
Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX input.
19. CAMERA INPUT OPERATIONS
Switching to Camera mode
Touch [Camera] button on Main Menu.
The LCD will display the external camera video. The screen will display “No Video Signal” message, if a valid
camera is not connect to this head unit.
Touch MENU button on Operational Panel to return to the Main Menu.
Note:
If the reverse cable is connected correctly to the car, this unit goes to camera mode automatically when the car is in
reverses.
44
NX404E
1
1. Touch the button to access the front source.
Touch the button to close the rear source.
Multi-Zone Operation
Independent sources can be played simultaneously
on the unit. For example, a FM/AM console can be
playback on the front screen while DVD video is
available to rear passengers. But now can’t select
DVD video in front.
Access Rear-Zone
DVD Video Rear Source Control
Information Mode.
1. Touch the Rear button on Main Menu to access the
Rear Source.
2. Select a source to play.
Exit Rear-Zone
Touch the 2-Zone off button to close the Rear Source.
Note:
1. If the source is selected as the front, the source in
rear can’t be selected.
2. If the source is selected as the rear, the source in
front can’t be selected.
3. Touch the Front button to access the main menu
but not close the Rear Source.
Touch BACK button to return.
DVD Video Rear Source Control Direct
Mode.
DVD Video in Rear
8
NOTE: More detail please refer to DVD Video Front
source.
1
2
3
4
5
6
7
NX404E
45
English
1 -Option button
2 -Show Cursor button
3 -Previous Chapter /Fast Backward button
4 -Play/Pause button
5 -Next Chapter /Fast Forward button
6 -Elapsed playing time
7 -Menu List button
8 -Front/Rear button
If the screen displays Rear Source, touch Front/Rear
button to switch to Front Source.
If the screen displays Front Source, touch Front/Rear
button to switch to Rear Source.
Owner’s Manual
If a monitor is installed in the rear zone and connected
to the rear zone AV output, passengers in the back
seat can watch the DVD/iPod Video/AUX1/ AUX2
video separately from front source.
E nglish
20. REAR SOURCE OPERATIONS
iPod Video Rear Source ID3 Mode
AUX1
English
Owner’s Manual
AUX2
iPod Video in Rear
iPod Video Rear Source Control Play
Mode
7
NOTE:
If the source is selected as the front, the source in rear
can’t be selected.
If the source is selected as the rear, the source in front
can’t be selected.
Touch the Front button to access the front main menu
but the rear source will keep running.
TV in Rear
1
2
3
4
5
6
1 - Previous Track /Fast Backward button
2 - Play/Pause button
3 - Next Track/Fast Forward button
4 - Progress bar
5 - Menu list button:
Touch the Menu button to display the iPod Video
Rear Source mode screen.
6 - Repeat button:
Same as iPod function of front source
7 - Front/Rear button
If the screen displays Rear Source, touch to
switch to Front Source.
If the screen displays Front Source, touch to
switch to Rear Source.
46
NX404E
Note:TV function depends on the location of your area.
Please consult the local suppliers.
•Enter
Touch the TV button on the Main menu display. The TV
mode screen is displayed.
•Exit
Choose the other operations will exit TV mode.
Specific operations please consult the TV user manual.
Different digital TV boxes include different operations.
E nglish
English
21. SETTING OPERATIONS
Touch [
] button on the Main menu screen.
The Setting menu screen will be displayed.
Owner’s Manual
General Setup Menu
Time: Set system clock.
24-Hour Format: Set the time display mode.
Beep: Turn on or turn off the beep confirmation sound.
Bluetooth: Set the Bluetooth On or Off.
Wallpaper: Choose the desired wallpaper.
Input Aux Sense: AUX input switch, including Low,
Middle, High.
System Language: Set the Language for system
screen.
Illumination Color: Set the illumination color on the
panel.
Select menu to be able to select from Shortcut
menu and drag it to left side area.
DivX® Registration: Display the information about
DivX® registration.
Tel Speaker: There are two options, Left and Right.
For example, if current setting is Right, when BT
phone is coming in, only right speaker can hear the
phone.
Version: Display the software version information.
Note:
• Time and 24-Hour Format can be adjusted when set
the system time not to be synchronized with GPS local
time.
Video Setup Menu
This menu includes: DVD Wide Screen Mode;
Dimmer. Dimmer Mode
NX404E
47
English
DVD Wide Screen Mode: Set the DVD wide screen
mode On or Off.
Dimmer: Set Dimmer value from 0 to 20.
Dimmer Mode: There are three options, Day, Night
and Auto.
Owner’s Manual
Audio Setup Menu
This menu includes: GPS Time, Navi Interrupt, Voice
Guidance.
GPS Time: Set the system time to be synchronized
with GPS local time or not.
Navi Interrupt: There are three choices: On/Popup/
Off. “On”: The navigation screen will cover to AV
screen when reaching some button point. “Popup”:
When small turn info window will pop up in the top of
the AV screen to indicate the button point. “Off”: Turn
off this function.
Voice Guidance: There are three choose: On/Mute/
Off.
On: Interrupt function of voice guidance is on. While
interrupting no attenuate function of AV sound.
Mute: Interrupt function of voice guidance is on. While
interrupting attenuate function sound is on.
Off: Disable the navigation voice guidance.
This menu includes: Balance, Fader, Beat EQ, Sub
Woofer Ctrl, Sub Woofer Phase, High Pass Filter Low
Pass Filter, Line Out and Magna Bass EX.
Balance: Choose the desired volume for left and right
speaker.
Fader: Choose the desired volume for front and rear
speaker.
Beat EQ: Choose the desired mode: Bass Boost,
Impact, Excite, Custom and OFF.
Subwoofer Ctrl: Choose the desired subwoofer gain
from 0 to 14.
Subwoofer Phase: Choose the Subwoofer Phase
normal or reverse.
High Pass Filter: Choose the frequency about the
high pass filter or enable. The frequencies include
60Hz, 90Hz and 120Hz.
Low Pass Filter: Choose the frequency about the low
pass filter or enable. The frequencies include 60Hz,
90Hz and 120Hz.
Magna Bass EX: Choose the loudness On or Off.
Others Setup Menu
This menu include: Set Password; Parental Control;
Audio Language; Subtitle Language; Screen
Calibration and Factory Default.
Set Password: Set the password for DVD parental
control.
Parental Control: Set the rating of the age. It contains
Kid Safe/G/PG/PG- 13/PG-R/R/NC- 17/Adult.
Navigation Setup Menu
48
NX404E
E nglish
English
Audio Language: Set the Language for DVD Audio.
Subtitle Language: Set the Language for DVD subtitle.
Blinking LED: Set blinking LED On or Off.
Screen Calibrate: The function of it is to select the TS
Calibrate YES or NO.
Factory Default: The function is to select to load
factory default or not.
Owner’s Manual
Set the Anti-Theft code
1.If your unit is unlocked, hold the [
] button
more than 2 seconds, then the Anti-Theft setting
mode will display. Users can change anti-theft
code.
Touch [YES], the numerical keypad is displayed.
Enter the new password twice, then anti-theft code
is set and your unit is secured.
When the Anti-theft is “On”, you need enter correct
Anti-theft code to turn the unit on. If you enter
wrong code three times, the unit is locked, and must
be unlocked by the professionals.
2. If your unit is secured, hold the [
] button more
than 2 seconds, then the Anti-Theft setting mode
will display. The numerical keypad is displayed,
enter the right code to unlock.
Note:
If the anti-theft code is lost or forgotten, a charge will
be incurred at the owner’s expense by a Clarion service
station to unlock the NX404E.
NX404E
49
English
22. TROUBLESHOOTING
GENERAL
Owner’s Manual
Problem
Power does not turn on. (No
sound is produced.)
Nothing happens when buttons
are touched.
Display is not accurate.
The remote control unit does
not work.
Cause
Measure
Incorrect wiring.
Consult your installation center.
Fuse is blown.
The microprocessor has
malfunctioned due to noise,
etc.
Direct rays of the sun fall on
the light-receptive part of the
remote control unit.
The battery of the remote
control unit is dead or there is
no battery in the remote control
unit.
Replace with a fuse of the
same amperage. If the fuse
blows again, consult your store
of purchase.
Touch the reset button with a
thin rod.
Note:
When the Reset button is
touched, turn off the ACC
power.
* When the Reset button is
touched, frequencies of radio
stations, titles, etc. stored in
memory are cleared.
When direct rays of the sun fall
on the light-receptive part of
the remote control unit, it may
not work.
Check the battery of the remote
control unit.
DVD PLAYER
Problem
Disc cannot be loaded.
Sound skips or is noisy.
Sound is bad directly after
power is turned on.
Video images are not
displayed.
Disc cannot play with
the display “PARENTAL
VIOLATION” shown.
50
NX404E
Cause
Measure
There is foreign matter already
in the disc slot.
Remove the foreign matter, or
consult a service station.
A disc is already loaded.
Disc is dirty.
Disc is heavily scratched or
warped.
Condensation may form on the
internal lens when the car is
parked in a humid place.
The parking brake is not
engaged.
Feature exceeds set parental
level.
Eject the disc before loading
the new one.
Clean the disc with a soft cloth.
Replace with a disc in good
condition.
Let dry for about 1 hour with the
power on.
Check that the parking brake is
engaged.
Release the view limitation or
change the parental level.
See the subsection “Setting up
the parental level”
Measure
The USB connector is broken.
Replace with a new USB
device.
USB device cannot be inserted. The USB device has been
inserted with wrong direction.
USB device is not recognized.
The USB device is damaged.
No sound heard with the
display “NO FILE” shown.
No MP3/WMA file is stored in
the USB device.
The video image of iPod/
iPhone is disturbed.
The TV Signal setting of the
iPod/iPhone is not set correctly.
Sound skips or is noisy.
Connectors are loose.
MP3/WMA files are not
encoded properly.
Reversing the connection
direction of the USB device, try
it again.
Disconnect the USB device
and reconnect. If the device
is still not recognized, try
replacing with a different USB
device.
Store these files properly in the
USB device.
Use MP3/WMA files encoded
properly.
Set the TV Signal setting
(NTSC/PAL) of the iPod/iPhone
correctly.
Bluetooth
Problem
Cannot pair the Bluetooth
enable device with the car
audio system.
The audio quality is poor after
connection with a Bluetooth
enabled device.
Cause
Measure
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the
device for how to enable the
function.
The device does not support
the profiles required for the
system.
The Bluetooth reception is
poor.
Use another device to connect.
Move the device closer to the
car audio system or remove
any obstacle between the
device and the system.
NX404E
51
Owner’s Manual
Cause
E nglish
Problem
English
USB DEVICE
TFT screen
English
Owner’s Manual
Problem
Cause
Measure
The image is not displayed.
The parking brake is not
engaged.
Check that the parking brake is
engaged.
The operating condition is not
good.
The temperature inside the
vehicle may be 0°C or lower. Set
to an appropriate temperature
(25°C or so) and check it again.
The display is dark.
The Dimmer control is too low.
The headlight of the vehicle
is lit
There are red, green, and blue
points in display.
52
NX404E
--------------------
Adjust the Dimmer properly.
The display is made dark
at night to prevent the glare
(When the headlight of the
vehicle is lit in the daytime, the
display gets dark).
This is not a failure, but a
phenomenon peculiar to a
liquid crystal panel (The liquid
crystal panel is produced
according to technology with
very high precision. Note that,
though there are effective
pixels of 99.99% or more, pixel
missing or normally lit pixels
account for 0.01%).
E nglish
English
23. ERROR DISPLAY
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
Cause
Measure
BAD DISC
A disc cannot be played due to
scratches, etc.
Replace with a non-scratched,
non-warped disc.
BAD DISC
BAD DISC
PARENTAL VIOLATION
Disc Region incorrect
A disc is caught inside the DVD
deck and is not ejected.
A disc is loaded upside- down
inside the DVD deck and does
not play.
Parental level error
Region code error
Owner’s Manual
DVD PLAYER
This is a failure of DVD deck’s
mechanism and consult your
store of purchase.
Eject the disc then reload it
properly.
Set the correct Parental level.
Eject the disc, and replace
correct region code disc.
NX404E
53
English
24. SPECIFICATIONS
Owner’s Manual
FM Tuner
A2DP (Advanced Audio Distribution Profile)
Frequency Range: 87.5 MHz to 108.0 MHz
AVRCP1.2,1.3,1.4 (AV Remote Control Profile)
Usable Sensitivity: 8 dBµV
PBAP (Phone Book Access Profile)
Stereo Separation: 25 dB (1 kHz)
SPP (Serial Port Profile)
Frequency Response: 30 Hz to 14 kHz
Power Class: 2
AM Tuner
USB
Frequency Range: 531 kHz to 1,602 kHz
Specification: USB 1.1/2.0 (FS)
Usable Sensitivity: 30 dBµV
Playable Audio format:
MP3,WMA,AAC,FLAC
DVD Player System
Playable Video format:
Digital Versatile Disc System with CDDA capable
AVI,MP4,MPG/MPEG,3gp
Usable discs:
DVD video disc, Compact disc
General
Frequency Response: 20 Hz to 20 kHz
Power source voltage:
Signal/Noise Ratio: 93 dbA
14.4 VDC (10.8 to 15.6 V allowable)
Distortion: 0.05%
Ground: Negative
Video system: NTSC/PAL
Current consumption: 4.0 A @1 W
Auto Antenna Rated Current: 500 mA less
Audio/Video Input
Audio input voltage: ≤ 2 Vrms
Video input voltage: 1.0 Vp-p@75
Audio input sensitivity (at 2 V output)
Audio Amplifier
Maximum power output:
180W (45W x 4)
High: 325 mVrms
Speaker impedance 4
Mid: 650 mVrms
Output power:
Low: 1.3 Vrms
4 x 25W DIN 45324,+B=14.4V
Audio/Video output
Video output voltage: 1.0 Vp-p @75
Screen Size: 6.2” wide type
Pixels: 1,152,000
Resolution: 800 x 480 x 3 (RGB)
Bluetooth
Specification: Bluetooth Ver 2.1+EDR
Profile: HFP1.5(Hands Free Profile)
54
HSP1.0 (Headset Profile)
NX404E
(4 to 8
allowable)
E nglish
English
Note:
•Specifications and design are subject to change without notice for further improvement.
172mm
165mm
1 0 0 mm
Owner’s Manual
1 7 8 mm
NX404E dimensions:
NX404E weight: 2.3 kg
NX404E
55
English
25. WIRE CONNECTION GUIDE
Owner’s Manual
Note:
• Before installing, be sure to disconnect the negative cable of the car battery.
• In the optional devices, the RCA cables and the Connector cables are separately-sold
items.
• When connect the HDMI cable, be sure to fix with the HDMI cable holder and Machine screw(M2 x
4).
NX404E
HDMI cable holder
DTX502E or DAB404E
Refer to
page 57
CCA-750(sold separately)
HDMI CABLE
MIC
Front
Right
Rear
Right
Front
Left
SUBWOOFER2
White
Black
Gray
Black
Gray
Red
SUBWOOFER1
SWI
Red
White White Red
Rear
Left
AUX2 AUDIO IN RCH
Red
AUX2 AUDIO IN LCH
White
AUX2 VIDEO IN
Yellow
REAR LCH
REAR RCH
CAMERA
56
NX404E
Red
For Rear zone
VIDEO OUT
4-Channel Amplifier
White
Yellow
Yellow
English
E nglish
Owner’s Manual
Yellow
BACKUP
15A
Black
GND
ILLUMI
Orange/White
AUTO ANT
Blue
ACC
Red
PHONE INT
Brown
Purple/White
Parking brake safety
!!!!Warning!!!!
for complete operation
Grass-green
device must be connected
Blue/White REMOTE
Purple/Black
PARKING
REVERSE
RRRR+
Purple
Gray/Black
FR-
Gray
FR+
White
FL+
White/Black
Green
Green/Black
FLRL+
RL-
Note:
*1: Connecting the PHONE INTERRUPT terminal
The phone interrupt will mute the audio if the lead receives a negative or ground signal.
NX404E
57
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2014: Clarion Co., Ltd.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising