HPE OfficeConnect 1620 Switch Series

HPE OfficeConnect 1620 Switch Series
Data sheet
HPE OfficeConnect 1620
Switch Series
Key features
•Entry-level, smart-managed Layer 2 switches
•8-, 24-, and 48-port gigabit models are rack-mount capable with included hardware
•8- and 24-port models run quiet (fanless)
•All models include internal power supplies
•Limited Lifetime Warranty
Product overview
HPE OfficeConnect 1620 Switch Series are entry configurable switches for small business
networking, a step up from unmanaged devices, with features to enhance network security,
performance and reliability. The series is part of the OfficeConnect portfolio of Hewlett Packard
Enterprise small business networking products.
These Gigabit switches are plug-and-play out of the box, yet network operations can be fine-tuned
through features available from a simple Web browser-based GUI, if necessary. Enhance security
using virtual LANs, link aggregation, or IGMP Snooping boost uplink performance, and loop
prevention enhances network reliability.
The series consists of 8-, 24-, and 48-port 10/100/1000BASE-T models each providing non-blocking
gigabit per port performance. All models can be rack mounted and include the necessary
rack-mounting hardware; the 8-port model can also be wall mounted. All models come with internal
power supplies and localized power cord removing the need to manage external power adapters.
The 8- and 24-port models are fanless for silent operation.
This series comes with a Limited Lifetime Warranty providing advance hardware replacement
with next business day shipment in most countries, 24x7 phone support available for the first
90 days, and electronic and business hours phone support for the entire warranty period.
Data sheet
Page 2
Features and benefits
Management
•Simple Web management
Allows for easy management of the switch even by nontechnical users through an intuitive
Web GUI; supports HTTP and HTTP Secure (HTTPS)
•Secure Web GUI
Provides a secure, easy-to-use graphical interface for configuring the switch via HTTPS
•SNMPv1, v2c, and v3
Facilitates management of the switch, as the device can be discovered and monitored from an
SNMP management station
•Port mirroring
Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
•Default DHCP Client mode
Allows the switch to be directly connected to a network, enabling plug-and-play operation; in
absence of a DHCP server on the network, the switch will fall back to a unique static address
determined by the switch’s MAC address
•Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping
consistent among all clock-dependent devices within the network so that the devices can
provide diverse applications based on the consistent time
•Manual network time configuration
Manually set the date and time on the switch in the absence of a NTP server
•Dual flash images
Provide independent primary and secondary operating system files for backup while upgrading
Quality of service (QoS)
•IEEE 802.1p prioritization with DSCP
Delivers data from the switch to devices based on the priority and type of traffic using
Differentiated Services Code Point (DSCP)
•Broadcast control
Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
•Rate limiting
Sets per-port ingress enforced maximums and per-port, per-queue minimums
Data sheet
Page 3
Connectivity
•Auto-MDI/MDIX
Automatically adjusts for straight-through or crossover cables on all ports
•IEEE 802.3X Flow Control
Provides a flow throttling mechanism propagated through the network to prevent packet loss
at a congested node
•Loopback detection
If the switch detects a loop, it disables the source port from forwarding data packets originating
from the switch to avoid broadcast storms
•Energy Efficient Ethernet
Compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity
•Port power save mode
Enables a port to operate at the lowest transmission speed or go down during a specific time
range on certain days of a week. The port resumes when the effective time period ends
•Cable test
Performs a check on the status of the cable connected to an Ethernet port on the device.
The test determines whether a short circuit or open circuit is present on the cable and the
approximate length to the fault in the cable
Performance
•Half- and full-duplex auto-negotiating capability on every port doubles the throughput of
every port
•IGMP Snooping, v1, v2, and v3
Improves network performance through multicast filtering, instead of flooding traffic to all ports
Layer 2 switching
•VLAN support and tagging
Supports IEEE 802.1Q with 4,096 simultaneous VLAN IDs
•Jumbo frame support
Supports up to 10 kilobyte frame size to improve the performance of large data transfers
Data sheet
Page 4
Resiliency and high availability
•Link aggregation
Groups together multiple ports (up to a maximum of eight ports per trunk)
automatically using Link Aggregation Control Protocol (LACP), or manually, to form
an ultra‑high‑bandwidth connection to the network backbone; helps prevent traffic
bottlenecks. Note: 8 port model support 4 trunks, 24 port model support 8 trunks, and the
48 port model support 16 trunks.
Warranty and support
•Limited Lifetime Warranty
This series comes with a Limited Lifetime Warranty providing advance hardware replacement
with next business day shipment in most countries, 24x7 phone support available for the first
90 days, and electronic and business hours phone support for the entire warranty period.
See hpe.com/networking/warrantysummary for full warranty and support information
included with your product purchase.
Data sheet
Page 5
HPE OfficeConnect 1620 Switch Series
Specifications
HPE OfficeConnect 1620 8 G Switch
(JG912A)
HPE OfficeConnect 1620 24G Switch
(JG913A)
HPE OfficeConnect 1620 48G Switch
(JG914A)
I/O ports and slots
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
Additional ports and slots
1 RJ-45 console port to access limited
CLI port
1 RJ-45 console port to access limited
CLI port
1 RJ-45 console port to access limited
CLI port
10.47(w) x 6.38(d) x 1.73(h) in
(26.59 x 16.21 x 4.39 cm) (1U height)
2.2 lb (1 kg)
17.32(w) x 6.81(d) x 1.73(h) in
(43.99 x 17.3 x 4.39 cm) (1U height)
4.85 lb (2.2 kg)
17.32(w) x 9.37(d) x 1.73(h) in
(43.99 x 23.8 x 4.39 cm)
7.28 lb (3.3 kg)
Memory and processor
MIPS @ 500 MHz, 32 MB flash, 128 MB
SDRAM; packet buffer size: 512 KB
MIPS @ 500 MHz, 32 MB flash, 128 MB
SDRAM; packet buffer size: 512 KB
MIPS @ 650 MHz, 32 MB flash, 128 MB
SDRAM; packet buffer size: 512 KB 1.5 MB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco
rack or equipment cabinet (hardware
included), wall mount
Mounts in an EIA standard 19-inch
telco rack or equipment cabinet
(hardware included)
Mounts in an EIA standard 19-inch
telco rack or equipment cabinet
(hardware included)
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
< 7 µs
< 5 µs
up to 11.9 Mpps (64-byte packets)
16 Gbps
8192 entries
< 7 µs
< 5 µs
up to 35.7 Mpps (64-byte packets)
48 Gbps
8192 entries
< 7 µs
< 5 µs
up to 71.4 Mpps (64-byte packets)
96 Gbps
16384 entries
Reliability
MTBF (years)
138.89
123.46
81.30
Physical characteristics
Dimensions
Weight
Data sheet
Specifications
Page 6
HPE OfficeConnect 1620 8 G Switch
(JG912A)
HPE OfficeConnect 1620 24G Switch
(JG913A)
HPE OfficeConnect 1620 48G Switch
(JG914A)
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
No Fan
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
No Fan
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
Power: 49.7 dB, Pressure: 49.7 dB;
ISO 7779
Electrical characteristics
Frequency
AC voltage
Maximum power rating
50/60 Hz
100 - 240 VAC
7W
50/60 Hz
100 - 240 VAC
15 W
50/60 Hz
100 - 240 VAC
28.2 W
Note:
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning
the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Note:
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning
the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Note:
Maximum power rating and maximum
heat dissipation are the worst-case
theoretical maximum numbers provided
for planning the infrastructure with
fully loaded PoE (if equipped), 100%
traffic, all ports plugged in, and all
modules populated.
Safety
IEC 60950-1; EN 60950-1; CSA 22.2 60950-1; UL 60950-1 2nd Edition
IEC 60950-1; EN 60950-1; CSA 22.2 60950-1; UL 60950-1 2nd Edition
IEC 60950-1; EN 60950-1; CSA 22.2 60950-1; UL 60950-1 2nd Edition
Emissions
FCC part 15 Class A; VCCI Class A;
EN 55022 Class A; CISPR 22 Class A;
EN 55024; EN 61000-3-2 2000,
61000‑3-3; ICES-003 Class A
FCC part 15 Class A; VCCI Class A;
EN 55022 Class A; CISPR 22 Class A;
EN 55024; EN 61000-3-2 2000,
61000‑3-3; ICES-003 Class A
FCC part 15 Class A; VCCI Class A;
EN 55022 Class A; CISPR 22 Class A;
EN 55024; EN 61000-3-2 2000,
61000‑3‑3; ICES-003 Class A
Services
Refer to the Hewlett Packard Enterprise
website at
hpe.com/networking/services for
details on the service-level descriptions
and product numbers. For details about
services and response times in your area,
please contact your local Hewlett Packard
Enterprise sales office.
Refer to the Hewlett Packard Enterprise
website at
hpe.com/networking/services for
details on the service-level descriptions and
product numbers. For details about
services and response times in your area,
please contact your local Hewlett Packard
Enterprise sales office.
Refer to the Hewlett Packard Enterprise
website at
hpe.com/networking/services for details
on the service-level descriptions and
product numbers. For details about
services and response times in your area,
please contact your local Hewlett Packard
Enterprise sales office.
Data sheet
Page 7
Standards and Protocols
(applies to all products in series)
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
Learn more at IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
hpe.com/networking
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
Data sheet
Sign up for updates
Rate this document
© Copyright 2014-2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice.
The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall
not be liable for technical or editorial errors or omissions contained herein.
4AA5-5571ENW, April 2016, Rev. 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising