Tellabs® 729GP Optical Network Terminal (ONT)

Tellabs® 729GP Optical Network Terminal (ONT)
TELLABS DATA SHEET
Tellabs® 729GP Optical Network Terminal (ONT)
Flexible, stackable communications closet, multidesk or multidwelling unit 24-port ONT
for Gigabit Ethernet, PoE+ and POTS services delivery
Overview
Designed to deliver powerful enterprise business data, VoIP,
and POTS services to 24 end-points, the stackable, scalable
Tellabs® 729GP Optical Network Terminal (ONT) packs a lot of
functionality into a compact one-rack unit (1 RU) chassis. It can be
located in a telecommunications room, data center or telephone
closet, driving fiber optics closer to the users and end devices.
Tellabs 729GP ONT features 24 ports of Gigabit Ethernet with
Power over Ethernet (PoE) for powerful enterprise business data
service delivery. IEEE 802.3af PoE and 802.3at PoE+ compliance
provides up to 30 watts on each Ethernet port. PoE provides
remote power to VoIP desktop phones, Wi-Fi access points, IP
security cameras and other environmental and access control
systems. The Tellabs 729GP also features 24 ports for analog
voice business service delivery.
Tellabs® 729GP Optical Network Terminal (ONT)
Services
Data
Equipped with standard RJ-45 CAT-rated cabling for Ethernet
data and voice service delivery, the Tellabs 729GP ONTs feature
an ITU-T G.984-compliant 2.5 Gbps downstream and 1.25 Gbps
upstream G-PON interface supporting the full range of advanced
services, including voice, video, data, Wi-Fi, smart buildings apps,
security, surveillance, environmental and automation.
Twenty-four 10/100/1000 Base-T Gigabit Ethernet data
interface ports
n
Power over Ethernet compliant with IEEE 802.3af and 802.3at
n
Autonegotiation and MDI/MDIX autosensing
n
Advanced data features, including Virtual Local Area Network
(VLAN) trunking, VLAN termination, VLAN translation, traffic
classification and access control lists (ACLs)
n
All features and functionality can be defined in software
and dynamically allocated, based on real-time needs. Being
controlled by the Tellabs® Panorama™ PON Manager helps speed
installations and daily operations. Centrally controlled by the
Tellabs Panorama PON Manager, the Tellabs 729GP ONT supports
autodiscovery mechanisms, can be quickly provisioned using
global templates and wizards, and offers smart troubleshooting
tools, all of which allow for speedy moves, adds and changes in
everyday operations.
IEEE 802.1P and IEEE 802.1Q
n
IEEE 802.1x port-based authentication
n
Link Layer Data Protocol (LLDP) for autoprovisioning, inventory
and PoE power management
n
Network access control (NAC)
n
Tellabs 729GP ONT is ideal for supporting modern highperformance LAN data services and applications, including
wireless access points, security, automation, access control,
environmentals and other corporate services.
See Tellabs.com for more information about Tellabs Solutions
1
DATA SHEET
TELLABS® 729GP OPTICAL NETWORK TERMINAL (ONT)
Voice
24 ports of POTS interface for carriergrade voice services
n
Five REN per line, balanced ring at 55 V
RMS, DTMF dialing
n
Support for multiple voice codecs
n
Specifications
1.7 in/43 mm (H) x 17.3 in/439 mm (W) x
17.5 in/444 mm (D)
n
Power Supply
Input power — 120/240 VAC 50/60 Hz
Full class service support — caller ID, call
waiting, call forwarding, call transfer, etc.
n
SIP (RFC-3261)
n
Drop-in replacement to serve existing
analog telephone sets
n
n
n
3-pin AC power connector with switch
and fuse (rear accessible)
Power cord included (IEC C15)
n
1.244 Gbps burst mode upstream
transmitter
n
APD receiver and DFB transmitter
n
Input at ONT (volts): 100–240 VAC
Video
2.488 Gbps downstream receiver
n
Compliant with ITU-T G.984.2 Amd1,
Class B+
Powering
To enable VoIP access, the Tellabs 729GP
ONT also supports interfacing an external
IAD box or home router with voice
capability through the Ethernet interface.
The Tellabs 729GP ONTs are an excellent
choice for all forms of enterprise video,
such as entertainment, security, videoconferencing, high-end telepresence
conferencing, telepresence robotics and
surveillance.
Wavelengths: Upstream 1310 nm,
Downstream 1490 nm
n
Dying Gasp support
n
Tellabs 729GP ONT supports flexible video
content delivery in the form of Ethernet/
IP data, either as unicast or multicast
streams controlled by the Internet Group
Management Protocol (IGMP). Multicast
Quality of Service (QoS) is supported
with a combination of 802.1p bits and
advanced bandwidth management
mechanisms. Using VLANs and advanced
IGMP processing ensures security, service
delivery and efficiency for each user.
SFF-type laser, SC/APC connector
n
n
n
n
Compliant to ITU-T G.984 G-PON
standards
n
Dimensions
Echo canceling, VAD, CNG
n
Network Interface
Consumption Idle (watts): 63 W
n
Consumption w/o PoE Max (watts):
140 W
n
Consumption w/PoE Max (watts): 589 W
0.5~+5 dBm launch power, -27 dBm
sensitivity and -8 dBm overload
n
Laser compliant to FCC 47 CFR Part 15,
Class B and FDA 21 CFR 1040.10 and
1040.11, Class I
n
Max Draw at ONT (amps): 8.0 A
Gigabit Passive Optical Network
IEEE 802.3af PoE and IEEE 802.3at PoE+
compliant
n
n
n
450 watts of total PoE+ power per
729GP ONT
Fully ITU-T G.984-compliant framing
Multiple T-CONTs per device
n
Multiple GEM ports per device
n
n
Supports single T-CONT and multiple
T-CONTs modes
n
Back-up power through existing building
emergency power generation plant
n
Operating Environment
Flexible mapping between GEM ports
and T-CONT
n
Activation with automatic discovered SN
and password
Temperature: -5° C to +55° C
n
n
Relative humidity: 5% to 85%,
noncondensing
n
AES-128 decryption with key generation
and switching
n
Safety & EMI
Forward error correction (FEC)
n
ETSI, FCC and UL/ETL certified
n
802.1p mapper service profile on U/S
n
Installation
Mapping of GEM ports into a T-CONT
with priority queues-based scheduling
n
Rack or wall mounting
n
19" rack mounting, 1 RU height
n
Support for multicast GEM port
n
Brackets available for 23" mount option
n
See Tellabs.com for more information about Tellabs Solutions
2
DATA SHEET
TELLABS® 729GP OPTICAL NETWORK TERMINAL (ONT)
Ethernet Interfaces
10/100/1000 Base-T Gigabit Ethernet
with RJ-45 connectors
n
Power over Ethernet compliant with IEEE
802.3af and 802.3at
n
n
MDI/MDIX automatic sensing
Virtual switch based on 802.1Q VLAN
n
DTMF encoding by relay or
in-band method
Full class service support — caller ID,
call waiting, call forwarding, call transfer,
call toggle, three-way calling, distinctive
ringing and more
G.711 for fax, modem connection and
TTY devices
Up to 384 MAC addresses and 92 VLAN
groups
n
VLAN tagging/detagging per
Ethernet port
n
n
n
VLAN stacking, VLAN translation,
VLAN trunking
n
Marking/remarking of 802.1p
n
IGMP v2/v3 snooping
n
T.38/T.30 fax
Configurable dial plan
n
Country-specific ring tone generation
n
DHCP client or static IP configurations
LED Indicators
Power
n
n
Upstream broadcast rate limiting and
filtering for security control
n
n
Optical signal
Alarm
n
POTS
PoE
L2, L3, L4 access control lists (ACLs)
n
802.1x port-based authentication
n
Link Layer Data Protocol (LLDP) for
autoprovisioning, inventory and PoE
power management
Operations, Administration and
Maintenance (OAM)
n
n
n
Network access control (NAC)
n
POTS Interfaces
Standard 50-pin connector (RJ-21)
n
5-REN load
n
Balanced ring, 55 V RMS
n
DTMF dialing
n
Multiple codecs:
n
– G.711 (-law and A-law)
– G.729 (A and B)
– G.723.1
Echo cancellation
n
For more information, please contact your
local Tellabs sales representative or local
Tellabs sales office at the phone numbers
listed below, or visit www.tellabs.com.
The development, release and timing
of features or functionality described
for Tellabs products remains at Tellabs’
sole discretion. The information that is
provided within this data sheet is not a
commitment or legal obligation to deliver
any material, code or functionality.
n
MAC address limiting to prevent
flooding overflow
n
Minimum base software SR.27
n
RTP (RFC3550/3551)
n
Ethernet port autonegotiation or
manual configuration
n
Part Number 81.16G-729GP0PB-R6
n
SDP (RFC-2327)
n
n
n
Tellabs 729GP ONT
SIP (RFC-3261)
n
Maximum PoE power: 30 W/port; 450 W
per unit
n
Ordering Information
Voice activity detection (VAD) and
comfort noise insertion
n
Individual LAN port speed indication
Standards-compliant OMCI as defined in
ITU-T G.988 and G.984.4
n
Management information base (MIB)
manipulation over OMCI by Create,
Delete, Set, Get and Get Next commands
n
Complete service provisioning, such as
Ethernet and VoIP
n
Alarming, events and performance
monitoring
n
Remote image download over OMCI as
well as activation and rebooting
n
Holds two versions of software with image
integrity checking and automatic rollback
n
Take the next step. Contact Tellabs today.
+1 800 690 2324
+1 630 798 9900
www.tellabs.com
© 2015, Tellabs Access, LLC. All rights reserved.
1415 West Diehl Road
Naperville, IL 60563
U.S.A.
1509vA
See Tellabs.com for more information about Tellabs Solutions
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising