A4300 VA3 Pro - Medir International

A4300 VA3 Pro - Medir International
A4300 VA3 Pro
3-channel vibration analyzer
master the language of your machinery
master the language of your machinery
A4300 VA3 Pro
The A4300 VA3 Pro is the newest addition to our
range of portable devices for vibration diagnostics.
There are 2 signal inputs and 1 tacho/trigger
input. Input 2 offers connectivity to a triaxial
sensor, therefore all 3 channels can be measured
simultaneously. The expert system developed
by Adash can automatically detect machine faults
such as unbalance, looseness, misalignment
and bearing faults.
3-channel analyzer
There is a non-contact IR temperature sensor
(for immediate bearing temperature measurement)
and a LED stroboscope/torch. The A4300 VA3 Pro
is designed for one-handed operation. With
a weight of just 780g and a battery life of more
than 10 hours of operation, the unit is suitable
for long route measurements.
The A4300 VA3 Pro instrument can be configured
according to your requirements by choosing
optional modules: analyzer, route, balancer
or recorder. Optional modules can be purchased
also additionally and downloaded to the instrument
without the need of sending it back to the factory.
>> Low weight 780 g
>> Long lasting battery
>> Ideal for route measurement
>> Route compatibility with VA4 Pro
Includes stroboscope
and torch
Analyzer
2
Route
Balancer
MEASUREMENTS
Meter
Expert system
Stroboscope
Recorder
Analyzer
Time signal
Expert system
Data processing
A/D conversion
››
››
››
››
››
››
››
››
››
››
››
››
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Balancer
24 Bit A/D conversion
64 Bit signal processing
120 dB dynamic range
No Auto-Gain
Ideal for route measurement
TOP PANEL
››
››
››
››
››
››
›› ACC ICP® - sensor input
›› 2 signal inputs AC/DC (IN1,IN2)
›› Input IN2 is ready for triaxial sensor
(3 simultaneous channels)
›› Input for tacho/trigger
›› IR non-contact temperature sensor
›› LED stroboscope/torch
Heavy-Duty aluminium case
Removable Li-Ion battery pack
More than 10 hours of operation
Colour display 240 x 320 px
FFT resolution: 25 600 lines
Route memory: 8 GB
3
TEcHNicAL sPEcificATioNs:
Input channels:
3 AC, ICP® power supply on/off
3 DC for process values
1 TACHO for external trigger
Input range:
AC +/- 12 V peak-peak
DC +/- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges:
Maximum range: 1 Hz - 25 kHz (64 kHz sampling)
Minimum range: 1 Hz - 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Unit modes:
Analyzer - analytic measurement
Data collector - route measurement
Balancer
Recorder
LED stroboscope, LED torch
FASIT - Expert system for fault detection
Vibration meter
Data processing:
Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Communication:
USB
Temperature range:
-10˚C to +50˚C
Power:
Battery 10 hours of operation, AC 230 V
Case:
Aluminium heavy duty
© Adash 2016
master the language of your machinery
Medir International B.V.
Tinstraat 85-87
2984 AN Ridderkerk
T: +31 180 46 44 82
www.medir.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising