Cisco 100BASE-X Small Form-Factor Pluggable Modules for Fast

Cisco 100BASE-X Small Form-Factor Pluggable Modules for Fast
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
Data Sheet
Cisco 100BASE-X Small Form-Factor Pluggable
Modules for Fast Ethernet Applications
Product Overview
The Cisco® 100BASE-X Small Form-Factor Pluggable (SFP) device (Figure 1) is a hot-swappable input/output
device that plugs into Fast Ethernet ports, dual-rate Fast/Gigabit Ethernet ports, or Gigabit Ethernet ports of a
Cisco switch or router, linking the port with the fiber cabling network.
Main features include the following:
●
Hot-swappable when deployed, the switch or router does not have to reboot
●
Supports the “pay-as-you-populate” model
●
Interchangeable with other 100BASE-X SFPs on the same line card
●
Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a
Cisco qualified SFP
●
Optically interoperable with respective 100BASE-X Ethernet interfaces on the same link
Figure 1.
Cisco 100M Ethernet SFP
Cisco 100BASE-FX SFP
The Cisco 100BASE-FX SFP operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers (km)
long.
GLC-FE-100FX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and
routers.
GLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial
Ethernet and SmartGrid switches and routers.
GLC-GE-100FX modules operate in Gigabit Ethernet ports of Cisco switches and routers.
All these modules are interoperable with industrywide interfaces compliant to the IEEE 100BASE-FX standard.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
Cisco 100BASE-LX10 SFP
The Cisco 100BASE-LX10 SFP operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 km long.
GLC-FE-100LX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and
routers.
GLC-FE-100LX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial
Ethernet and SmartGrid switches and routers.
These modules are interoperable with industrywide interfaces compliant to the IEEE 100BASE-LX10 standard.
Cisco 100BASE-BX10 SFP
The Cisco 100BASE-BX10 (part numbers GLC-FE-100BX-D and GLC-FE-100BX-U) SFPs operate on ordinary
SMF single-strand link spans up to 10 km long. A 100BASE-BX10-D device is always connected a 100BASEBX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km. The
communication over a single strand of fiber is achieved by separating the transmission wavelength of the two
devices as depicted in Figure 2. 100BASE-BX10-D transmits a 1550-nm channel and receives a 1310-nm signal,
whereas a 100BASE-BX10-U transmits a 1310-nm wavelength and receives a 1550-nm signal. Note in Figure 2
the presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and
1550-nm light paths.
Figure 2.
Bidirectional Transmission on a Single Strand of SMF
Cisco 100BASE-EX SFP
The Cisco 100BASE-EX SFP operates on ordinary SMF link spans up to 40 km long.
GLC-FE-100EX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and
routers.
Cisco 100BASE-ZX SFP
The Cisco 100BASE-ZX SFP operates on ordinary SMF link spans up to 80 km long.
GLC-FE-100ZX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and
routers.
Cisco 100BASE-T Copper SFP
The 100BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to
100 m (328 ft). It supports Industrial temperature range of -40 to 85C.
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
Technical Specifications
Platform Support
The Cisco SFPs are supported across a variety of Cisco switches, routers, and optical transport devices. For more
details, refer to the document Cisco 100M Ethernet SFP Compatibility Matrix.
Connectors and Cabling
Connectors: Dual LC connector (GLC-FE-100FX, GLC-FE-100FX-RGD, GLC-GE-100FX, GLC-FE-100LX,
GLC-FE-100LX-RGD, GLC-FE-100EX, and GLC-FE-100ZX) or single LC connector (GLC-FE-100BX-D and
GLC-FE-100BX-U)
Table 1 provides cabling specifications for the SFPs for installation in a Fast Ethernet SFP port. Note that all SFP
ports have LC-type connectors, and the minimum cable distance for all SFPs listed (MMF and SMF [G.652]) is 2
meters (6.5 feet).
Table 1.
SFP Port Cabling Specifications
SFP
Wavelength (nm)
Fiber Type
Cable Distance
GLC-FE-100FX
GLC-FE-100FX-RGD
GLC-GE-100FX
1300
MMF
2 km (6,562 ft)
GLC-FE-100LX
GLC-FE-100LX-RGD
1310
SMF
10 km (32,810 ft)
GLC-FE-100BX-U
1310
SMF
10 km (32,810 ft)
GLC-FE-100BX-D
1550
SMF
10 km (32,810 ft)
GLC-FE-100EX
1310
SMF
40 km (131,240 ft)
GLC-FE-100ZX
1550
SMF
80 km (262,480 ft)
Table 2 gives information about fiber loss.
Table 2.
Fiber-Loss Budgets
SFP
Type
Maximum
Minimum
Maximum
Minimum
GLC-FE-100FX
GLC-FE-100FX-RGD
GLC-GE-100FX
100BASE-FX
-14
-20
-14
-31
GLC-FE-100LX
GLC-FE-100LX-RGD
100BASE-LX10
-8
-15
-8
-28
GLC-FE-100BX-U
100BASE-BX10-U
-8
-14
-3
-28.2
GLC-FE-100BX-D
100BASE-BX10-D
-8
-14
-3
-28.2
GLC-FE-100EX
100BASE-EX
0
-5
-8
-28
GLC-FE-100ZX
100BASE-ZX
2
-3
-8
-30
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Transmit (dBm)
Receive (dBm)
Page 3 of 5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
Dimensions
Dimensions (H x W x D): 8.5 x 13.4 x 56.5 mm
Environmental Conditions and Power Requirements
●
Operating temperature range:
◦ Commercial temperature range (COM): 0 to 70°C (32 to 158°F), applicable to GLC-FE-100FX,
GLC-FE-100LX, GLC-GE-100FX, GLC-FE-100BX-D, GLC-FE-100BX-U, GLC-FE-100EX, and
GLC-FE-100ZX
◦ Industrial temperature range (IND): -40 to 85°C (-40 to 185°F), applicable to GLC-FE-100FX-RGD,
GLC-FE-100LX-RGD and GLC-FE-T-I
●
Storage temperature range: -40 to 85°C (-40 to 185°F)
●
Power consumption:
◦ GLC-FE-100FX, GLC-FE-100FX-RGD, GLC-FE-100BX-D, GLC-FE-100BX-U, GLC-FE-100EX, and
GLC-FE-100ZX modules consume up to 1W per port
◦ GLC-GE-100FX modules typically consume 1.5W per port (up to 1.7W)
◦ GLC-FE-T-I modules typically consume 1W per port
Warranty
●
Standard warranty: 1 year
●
Extended warranty (option): Available under a Cisco SMARTnet® Support contract for the Cisco switch or
router chassis
Ordering Information
Table 3 gives ordering information for the Cisco SFP.
Table 3.
Ordering Cisco SFP
Product Number
SFP
GLC-FE-100FX
100BASE-FX SFP for Fast Ethernet SFP Ports
GLC-FE-100FX-RGD
100BASE-FX Rugged SFP for Fast Ethernet SFP Ports
GLC-GE-100FX
100BASE-FX SFP for Gigabit Ethernet SFP Ports
GLC-FE-100LX
100BASE-LX10 SFP for Fast Ethernet SFP Ports
GLC-FE-100LX-RGD
100BASE-LX10 Rugged SFP for Fast Ethernet SFP Ports
GLC-FE-100BX-U
100BASE-BX10-U SFP for Fast Ethernet SFP Ports
GLC-FE-100BX-D
100BASE-BX10-D SFP for Fast Ethernet SFP Ports
GLC-FE-100EX
100BASE-EX for Fast Ethernet SFP Ports
GLC-FE-100ZX
100BASE-ZX for Fast Ethernet SFP Ports
GLC-FE-T-I
100BASE-T for Fast Ethernet SFP Ports
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 5
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
Regulatory and Standards Compliance
Safety
●
Laser Class 1 21CFR1040 LN#50 7/2001
●
Laser Class I IEC 60825
Standards
●
IEEE 802.3u
●
IEEE 802.3z
●
IEEE 802.3ah
●
GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
●
GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
●
GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
●
RoHS 5
Additional Information
For more information about Cisco 100BASE-X SFPs for Fast Ethernet SFP ports, contact:
●
United States and Canada: 800 553-6387
●
Europe: 32 2 778 4242
●
Australia: 61 2 9935 4107
●
Other: 408 526-7209
●
http://www.cisco.com
Printed in USA
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-486906-03
05/15
Page 5 of 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising