Hose Faucet Timer - Orbit Irrigation
FILTER
HOSE TAP
CONNECTION
+/BUTTONS
DIAL
For Rain Delay Press + in Auto
B C
STATION 1 2
RAIN
EVERY DAYS HRS DELAY
MINS
AM
PM
NEXT START TIME
Model: 24713
Made in Vietnam
Note: Firmly replace the battery tray to ensure water
resistance and increase battery life. You will know
the battery tray is fully inserted if it does not pull out
easily. Used up or dead batteries must be removed
from the timer and disposed of properly. Replace
batteries when low battery icon appears on display.
Do not dispose of batteries in fire. Batteries may
explode or leak.
S M T W T F S INT
ARROW
Maximum operating pressure 100 PSI
For outdoor use with cold water only.
Do not operate at temperatures
exceeding 120°F.
Keep from freezing.
Do not mix old and new batteries.
Do not mix alkaline, standard
(Carbon-Zinc), or rechargeable
(Nickel Cadmium) batteries.
STATION
MANUAL/
CLEAR
RESET
LOW
BATTERY
INDICATOR
STATION 1
Installing the Batteries
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2.Insert two AA (1.5V) alkaline batteries (not
included) and replace the tray.
STATION 2
B C
START TIME
STATION
How Long
AM
1 2
MINUTES
This timer features three customizable watering
schedules [A], [B], [C]. A watering schedule may include
start times for Station 1, Station 2, or both Station 1
and Station 2. A watering start time is the time of day
the timer will begin to water all programmed stations;
one after another.
Note: Only watering schedule [A] is required. Advanced
Users may use watering schedules [B] and [C] for
additional watering.
1. Turn dial to START TIME.
2. Watering schedule [A] is automatically selected and
the time selector will be blinking. Note: Timer will
not function without at least watering schedule [A]
selected.
3. Using the +/- buttons, set the time you want all
watering to begin, including AM and PM. Timer
advances faster if button is held down. A box is
placed around water schedule [A] noting a start time
has been added.
STATION
1 2
MINUTES
STATION
12
1. Turn dial to HOW LONG.
2.Station 1 and the time selector will be blinking.
3. Use +/- buttons to add a 1 to 360 minute watering
duration. Timer advances faster if button is held
down. A box is placed around Station 1.
Note: A watering duration is required for station
1 to water.
4.To select Station 2 press the STATION button.
Station 2 and the time selector will be blinking.
Note: To move between stations press the STATION
button.
© 2016 Orbit Inc.
This work is the property
of Orbit®, and cannot be
used, reproduced or
distributed in any way
without their express
permission.
∙
∙
∙
∙
PMS
0000
Additional Information
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit®.
Printed piece must meet
designated specifications
on this form.
PRINTERS ARE
REQUIRED TO MATCH
ALL SPECIFIED
PMS COLORS.
W: 12.0"
H: 6.0"
L: 0.0"
W: 3.0"
H: 1.5"
Flat
Folded
PMS
0000
PMS
0000
Glue
Product
Coverage
Fold
Dims./
Callout
PMS
0000
SOFTWARE: Adobe Indesign CC
Timer Features
Watering Schedules and Start Times
5. Advanced Users - To program watering schedules [B]
or [C] press the ARROW button to move through and
select [B] or [C]. Selected schedule will be blinking.
Repeat steps 3-5 to program additional watering
schedules. Use watering schedules [B] and [C] if you
need additional watering schedules.
6. Turn dial to save changes and move to the next step.
ARTWORK №: 24713-24 rD
AUTO—Timer waters according to your customized
schedule.
SET CLOCK—Set the time of day.
START TIME—Select what time you would
like to start watering.
HOW LONG—Determine how long to water
HOW OFTEN—Choose how often you will water
OFF—Turn off all watering.
Note: The timer will not function without at least one
station selected.
DESIGNER: SH MARKETING: AY
Filter traps dirt particles, prolonging
life of timer. Clean filter regularly and
replace if worn.
1. Turn dial to SET CLOCK.
2.Using the +/- buttons, set the time of day,
including AM and PM. Timer advances faster
if button is held down.
3. Press the ARROW button to set current day.
4.Press the +/- buttons to move between and
select the current day of the week. Press the
ARROW button to toggle back to the time
of day.
5. Turn dial to save changes.
DATE: 07/11/2016
When expecting freezing temperatures,
timers should be removed from the
hose faucet and stored indoors to avoid
potential freeze damage.
T
4.Both Station 1 and Station 2 are automatically
selected (noted by boxes around them) when a start
time is added. Both Station 1 and Station 2 will water,
one after the other, beginning at your selected start
time. To remove a station from watering schedule
[A] press the STATION button to cycle through and
select Station 1 or Station 2. Press the - button to
toggle the station off (removing the box). Press the +
button to toggle the station on (adding the box).
Dieline
Important, please read!
PM
K
Hose Faucet Timer
Note: The timer will not function without at least one
start time entered.
Orbit ®
2 Outlet Advanced
Programming the Timer
Set Clock and Day
1.801.299.5555
orbitonline.com
DIAL—Rotate the dial to customize your
watering schedule.
+/- Buttons—Use these buttons to adjust
time and program. While in AUTO press + to
activate Rain Delay.
ARROW—Moves cursor around the screen during
programming.
STATION—Moves between Station 1
and Station 2.
MANUAL/CLEAR—Press to water manually or
to clear programming.
RESET—Press to reset back to factory settings.
Timer
5. Use +/- buttons to add a 1 to 360 minute watering
duration. Timer advances faster if button is held
down. A box is placed around Station 2. Note: A
watering duration is required for station 2 to water.
• Press the + button to increase the interval. Press the
- button decrease the interval. You may choose to
interval water every 1 hour, 2 hours, 4 hours,
6 hours, 12 hours, or 1 to 7 days.
Note: To start over press CLEAR.
Note: To start over press CLEAR.
Note: The timer will not function without at least one
day of the week or an interval selected for Watering
Schedule [A].
4.Turn dial to save changes and move to the next step.
How Often
B C
S M T W T F S INT
1. Turn dial to HOW OFTEN.
2. Watering schedule [A] will be blinking.
Note: Timer will not function without at least watering
schedule [A] selected.
3. There are two ways to set your watering frequency
for Watering Schedule [A]; Days of the Week or
Interval. Only one option may be selected for
Watering Schedule [A].
Option 1–Days of the week–Select specific days you
want to water:
• Press + or - button to move the cursor down to the
Days of the Week.
• Use the ARROW button to move to the desired day
(S, M, T, W, T, F, S). The selected day of the week will
be blinking.
• Press the + button to toggle the Day of the Week on
(a box is placed on the day). Press the - button to
toggle the Day of the Week off (the box is removed
from the day).
• Repeat to select any combination of days.
Option 2–Interval–Select an interval period you want
to water:
• Press + or - button to move the cursor down to the
Interval selections.
• Use the ARROW button to move to INT. The Interval
[INT] selection will be blinking.
4.Advanced Users–To program watering schedules [B]
or [C] press the ARROW button to move through and
select [B] or [C]. Selected schedule will be blinking.
Repeat steps to program watering frequency for
additional Watering Schedules [B] and [C].
5. Turn dial to save changes and to complete
programming.
Congratulations!
Your timer is now programmed. Turn your dial to AUTO
to allow your timer to water according to programmed
time, station, duration, and frequency.
Additional Features
Rain Delay
DAYS
DELAY
Rain delay allows you to postpone watering for a set
period of time. To access the rain delay, follow the
steps below.
1. With the dial on AUTO, press the + button to select a
delay of 1 to 7 days.
2.Screen will flash between clock and hours remaining
before programmed cycle resumes.
3. To remove rain delay, turn dial to OFF and then back
to AUTO.
Manual/Hand Watering
MANUAL
MINUTES
STATION
1 2
This feature allows you to water without interrupting
your set schedule. To access this feature, follow the
steps below.
1. There are two ways to water: all stations as
programmed or selected stations.
To water all stations as programmed:
• With the dial on AUTO, press the
MANUAL button.
• “ALL” will be displayed and the timer will
water all stations as programmed.
To water specific stations or durations:
• With the dial on AUTO, press the
MANUAL button.
• Press the STATION button to select desired station.
• Using the +/- buttons, select watering duration from
1 to 360 minutes.
Timer does not water.
Check if:
• Timer is set to AUTO.
• Hose faucet is on.
• Batteries are low.
• Clock is set to correct time,
including AM and PM.
• Rain Delay is on.
Water won’t turn off.
Check if:
• HOW LONG is set to desired time.
• HOW OFTEN is set to desired
interval hour or day.
Working water pressure:
• Minimum: 10 psi
• Maximum: 100 psi
Working temperature:
• Maximum: Do not exceed 120°F
• Minimum: Keep from freezing
Warnings:
For outdoor use with cold water only.
Not for use with appliances.
Note: There may be a slight delay between the time the
manual button is pressed and when watering begins.
2.Screen will flash between clock and time remaining
before automatic programming resumes.
3. To stop manual watering, turn the dial
to OFF.
4.Turn the dial back to AUTO to resume your
programmed watering schedule.
Troubleshooting
Water does not come on at desired time.
Check if:
• Clock is set to correct time,
including AM and PM.
• Dial is set to “Auto”
• Start time is set to desired time,
including AM and PM.
• Rain Delay is on.
Customer Service
1-800-488-6156
orbitonline.com
Orbit® Irrigation Products, Inc.
North Salt Lake, UT 84054
© 2015 Orbit Irrigation Products, Inc.
All rights reserved. All trade names are
registered trademarks of respective
manufacturers listed.
PN 24713-24 rD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising