Software Release Summary: Daniel MeterLink for Daniel Gas and Liquid Ultrasonic Flow Meters Version 1.31 ▪▪ Field Setup Wizard now supports Type 4 CPU Module with additional Frequency/ Digital Outputs 4 through 6.(1) ▪▪ Field Setup Wizard now supports the GC Modbus TCP interface configuration. ▪▪ Unit labels have been added to the chordal velocity and speed of sound tables that appear in the Inspection Report. ▪▪ Additional technical enhancements: ◦◦ Fixed issue to ensure all column heading text displays correctly in the Meter Archive Logs dialog. ◦◦ Fixed issue to enable the table of meters in the Connect to Meter dialog to correctly display on any computer. Version 1.30 ▪▪ Added support for the diagnostic chord in the new dual-configuration Model 3416 Meter (i.e. alarm indication, configuration and charts). ▪▪ Regional dialogs updated to ensure data formatting, including the use of periods or commas, is more consistent by locale. ▪▪ Field Setup Wizard now supports GC component data configuration for Daniel 3410 Series Electronics running on v1.22 firmware and later. ▪▪ Field Setup Wizard now supports local display mode configuration for Daniel 3410/3810 Series Electronics running on v1.22 firmware and later. ▪▪ Option added that allows the creation of a Merged Events worksheet in the Microsoft® Excel® meter archive log. ▪▪ Automatically checks for software updates via the Internet. ▪▪ Fixed issue to ensure new meter database config XML files install correctly. ▪▪ Fixed issue where Excel 2013 charts were not visible. ▪▪ Fixed issue with Reset Tracking dialog. ▪▪ Fixed issue where Signal Analyzer caused MeterLink to crash or become unresponsive. ▪▪ Corrected SOS spread error on the Meter Monitor bar chart for Daniel JuniorSonic 2-path meters. Version 1.21 ▪▪ Provides support for Mark III memory usage changes in Mark III v1.78 firmware. Version 1.20 ▪▪ Added advanced network configurations, including new wireless connectivity with support for multiple Ethernet configurations. Designated ports now allow the use of port forwarding on a cellular modem/router. ◦◦ This enhancement allows users to connect to multiple meters on a single IP address (i.e. one modem). ◦◦ A new ‘Designated Ports’ help topic facilitates this network configuration. ▪▪ Dims non-pingable Ethernet connection buttons in the Connect to Meter dialog. ▪▪ Supports “Connect in a new instance” from the Connect to Meter dialog. ◦◦ This change allows log collection from multiple meters simultaneously to streamline tasks, including monthly maintenance procedures. ▪▪ Simplifies the creation of a more functional default meter directory after initial installation. ◦◦ This change ensures first-time users can quickly connect to meters. Type 4 CPU Module releasing for sale in June 2016. 1 Page 1 June 2016 Software Release Summary: Daniel MeterLink for Daniel Gas and Liquid Ultrasonic Flow Meters Version 1.20 continued ▪▪ New time-saving Tools Menu enhancements include: ◦◦ Set Transducer Type utility. ◦◦ Reset Tracking utility which simplifies a common maintenance procedure. ◦◦ Reset Velocity Estimation utility. ◦◦ Locate Meter utility. ◦◦ Warm Start Meter utility which enables users to easily reboot from a remote location. ▪▪ Additional enhancements for high viscosity liquid metering applications include: ◦◦ Support of profile factor frequency output content. ◦◦ Support of high viscosity calibration configuration. ◦◦ Support of zero calibration. ▪▪ Additional technical enhancements: ◦◦ Enables Microsoft Excel’s “Trust access to VBA” on start-up. ◦◦ Supports Microsoft Excel 2013. Version 1.10 ▪▪ Connects to co-located meters simultaneously from a single meter directory record associated with either meter. ▪▪ Combined Meter Monitor (Summary) displays combined values from the currently selected meter and values and status from both the primary and secondary meters. ▪▪ Field Setup Wizard supports local display configuration. ▪▪ Field Setup Wizard supports HART® 7 meter configuration. ▪▪ Displays the name of the currently connected meter in the title bar of dialogs and wizards that read from or write to a meter. ▪▪ Supported on Microsoft® Windows® 8.1. ▪▪ Communications Analyzer’s output for TCP/IP communications includes the meter’s IP address. ▪▪ Consolidates Program Download log output in the meter connection log (log_ meter_*.txt). Version 1.01 ▪▪ Bug fixes and data files added for Daniel 3410/3810 Series Ultrasonic Meters. Version 1.00 ▪▪ Installs separately from all earlier versions of Daniel CUI and replaces CUI for all Daniel meters with the exception of Mark II equipped gas ultrasonic meters. ▪▪ Does not require a license key. ▪▪ Supports Daniel Gas Mark III, Liquid 3804, and 3410 and 3810 Series Ultrasonic Meters. ▪▪ Direct/modem connections using SLIP no longer supported. Direct/modem connections must use PPP. ▪▪ Contains registers help files for Daniel Gas Mark III, Liquid 3804, and 3410 and 3810 Series Ultrasonic Meters. ▪▪ Supports two meter monitor views: “summary” and “detailed.” ▪▪ Supports 3410 and 3810 Series’ HART output on AO1 and secondary HART output on AO2. ▪▪ Edit/Compare Configuration simplifies upgrades by converting Mark II, Gas Mark III and Liquid 3804 configs to 3410 and 3810 Series configs. ▪▪ Field Setup Wizard and Outputs Test dialog support the 3410 and 3810 Series’ softconfigurable frequency/digital (“FODO”) outputs. Page 2 June 2016 Software Release Summary: Daniel MeterLink for Daniel Gas and Liquid Ultrasonic Flow Meters Version 1.00 continued ▪▪ Communications Settings dialog supports soft configuration of Port A’s driver selection and optional Port B handshaking. ▪▪ Program Download dialog prevents Gas Mark III and Liquid 3804 Firmware from being downloaded to 3410 and 3810 Series Ultrasonic Meters and vice versa. ▪▪ Has improved support for Microsoft Excel® 2007 and Microsoft Excel 2010. Emerson Process Management Daniel Measurement and Control, Inc. North America / Latin America: Headquarters USA - Houston, Texas T +1.713.467.6000 USA Toll Free 1.888.FLOW.001 Europe: Stirling, Scotland, UK T +44.1786.433400 Middle East, Africa: Dubai, UAE T +971.4.811.8100 Asia Pacific: Singapore T +65.6777.8211 www.Daniel.com Page 3 June 2016 ©2016 Daniel Measurement and Control, Inc. (“Daniel”) is an Emerson Process Management business unit. The Daniel name and logo are trademarks of Daniel Industries, Inc. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other trademarks are the property of their respective companies.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project