www.philips.com/welcome
Register your product and get support at
www.philips.com/welcome
MCD302
EN User manual
ZH-CN Ⴌ߀൱Ҭ
3
31
1 Important
Safety
Notice
2 Your DVD Micro Theater
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Connect
Place the unit
Connect speakers
Connect FM antenna
Connect TV
Connect power
4 Get started
Prepare the remote control
Set clock
Turn on
Find the correct viewing channel
Select the correct TV system
Change system menu language
Turn on Progressive Scan
5 Play
Play a disc
Play from USB
Play DivX video
Play MP3/WMA/picture files
Play control
Play options
Picture view options
6 Adjust settings
General setup
Audio setup
Video setup
Preference setup
4
4
6
7
7
7
8
9
11
11
11
11
12
13
14
14
14
14
14
15
15
15
7 Tune to FM radio stations
Program radio stations automatically
Program radio stations manually
Tune to a preset radio station
8 Adjust volume level and sound
effect
English
Contents
22
22
23
23
23
23
23
24
24
Adjust volume level
Select a sound effect
Mute sound
Listen through headphone
9 Other features
24
24
24
24
25
25
Activate demonstration mode
Adjust brightness of display panel
Set the alarm timer
Set the sleep timer
Connect other devices
10 Product information
26
26
27
27
Specifications
Supported disc formats
USB playability information
11 Troubleshooting
28
16
16
17
17
17
18
18
19
20
20
20
21
21
EN
3
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation point’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
4
EN
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i For countries with a
polarized mains, do not
defeat the safety purpose
of the polarized or
grounding-type plug. A polarized plug
has two blades with one wider than
the other. A grounding type plug has
two blades and a third grounding prong.
The wide blade or the third prong is
provided for your safety. If the provided
plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
Caution: To prevent electric shock, match
the wide blade of the plug to the wide
slot, fully insert.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
k Only use attachments/accessories
specified by the manufacturer.
l Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer or
sold with the apparatus.
When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tipover.
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
o Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the apparatus:
• Install all batteries correctly, + and
- as marked on the apparatus.
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
• Remove batteries when the unit is
not used for a long time.
p The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
q Apparatus shall not be exposed to
dripping or splashing.
r Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
s This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Warning
English
n Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
• Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
• Never remove the casing of this unit.
• Never lubricate any part of this unit.
• Place this unit on a flat, hard and stable
surface.
• Never place this unit on other electrical
equipment.
• Only use this unit indoors. Keep this unit away
from water, moisture and liquid-filled objects.
• Keep this unit away from direct sunlight, naked
flames or heat.
• Never look into the laser beam inside the unit.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
• Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
EN
5
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
• Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as
your hearing adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
6
EN
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
This apparatus includes this label:
You can play DVD discs with the following
region codes:
DVD region code
English
2 Your DVD
Micro Theater
Countries
China
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
What’s in the box
Introduction
With this unit, you can:
• watch video from DVD/VCD/SVCD or
USB devices
• enjoy audio from discs or USB devices
• view pictures from discs or USB devices
• Listen to FM radio
You can enrich sound output with these
sound effects:
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
• Bass/treble enhancement
Check and identify the contents of your
package:
• Main unit
• 2 speakers
• Remote control with battery
• Composite video cable (yellow)
• Power cord
• FM wire antenna
• MP3 Link cable
• User manual
• Quick start guide
The unit supports these media/disc formats:
Recordable
ReWritable
EN
7
Overview of the main unit
a b
c d
e f
p
8
EN
g h i
o
j k
l
n
m
•
Headphone socket.
b STANDBY-ON
• Turn on the apparatus; switch to
standby mode.
c MP3-LINK
• Jack for an external audio device.
p Display panel
• Display current status.
English
a
Overview of the remote
control
d OPEN/CLOSE
• Open or close the disc
compartment.
e DBB
• Turn on or off dynamic bass
enhancement.
f SOURCE
• Select a source.
g
a
b
x
c
w
v
d
e
/
•
•
•
Skip to the previous/next track.
Skip to the previous/next title or
chapter.
Tune to a radio station.
u
f
h PRESET +/• Select a preset radio station.
i
•
Start or pause play.
j STOP
• Stop play.
• Erase a program.
• In demo mode, activate or deactivate
demonstration.
k MODE
• Select repeat play modes.
• Select shuffle play modes.
l VOLUME -/+
• Adjust volume.
• Adjust time.
• During timer setting, select a source.
g
t
s
h
r
i
q
j
k
p
l
m
n
o
m USB DIRECT
• USB socket.
n Remote control sensor
o Disc compartment
EN
9
a
•
Turn on the apparatus; switch to
standby mode.
b Source selection keys
• Select a source.
c DISPLAY/RDS (RDS function unavailable
for this version)
• Display play information on a
connected TV.
d DISC MENU
• For video discs: access or exit the
disc menu.
• For video discs with playback
control(PBC): turn on/off PBC.
e AUDIO
• For VCD, select stereo, mono-left or
mono-right channel.
• For DVD/DivX video, select an audio
language.
f
Search within a track.
Tune to a radio station.
For menus, navigate left/right.
Move an enlarged image left/right.
Rotate or invert pictures.
SLOW/ ZOOM
• For menus, navigate up/down.
• Rotate or invert pictures.
• ( SLOW) For video: select a slow
play mode.
• ( ZOOM) For video: zoom in/out.
h LOUD/DBB
• Turn on or off automatic loudness
adjustment.
• Turn on or off dynamic bass
enhancement.
i VOL +/• Adjust volume.
• Adjust time.
• During timer setting, select a source.
j MUTE
• Mute or restore volume.
10
l SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
m SUBTITLE
• Select a subtitle language.
n GOTO
• During disc play, specify a position to
start play.
o ANGLE/PROG
• Select a DVD camera angle.
• Program radio stations.
p Numeric keypad
• Select a title/chapter/track directly.
q
•
r
/
•
•
•
•
•
g
k CLOCK
• Set the clock.
EN
Stop play.
/
•
•
•
Skip to the previous/next track.
Skip to the previous/next title or
chapter.
Select a preset radio station.
•
Start or pause play.
s
t DSC
• Select a preset sound setting.
u OK
• Confirm a selection.
v A-B
• Repeat a specific section within a
track/disc.
w SYSTEM MENU
• Access or exit the system setup
menu.
x MODE/DIM
• Select repeat play modes.
• Select shuffle play modes.
• Select a brightness level for the
display screen.
Connect speakers
English
3 Connect
Note
Place the unit
• Ensure that the colors of the speaker wires
and terminals are matched.
• For optimal sound, use the supplied speakers
only.
• Connect only speakers with impedance that is
the same or higher than the supplied speakers.
Refer to the Specifications section of this
manual.
a
1
2
Place the unit near to the TV.
3
Place the subwoofer at the corner of the
room or at least one meter away from
the TV.
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
1
2
3
b
c
Hold down the socket flap.
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to “ R”,
left speaker wires to “ L”.
• Insert the red wires to “+”, black
wires to “-”.
Release the socket flap.
Note
• To avoid magnetic interference or unwanted
Connect FM antenna
noise, never place this apparatus and speakers
too close to any radiation devices.
• Place this unit on top of a table or mount it on
the wall.
• Never place this unit in an enclosed cabinet.
• Install this unit near the AC outlet where the
AC power plug can be easily reached.
EN
11
Tip
Note
• For optimal reception, fully extend and adjust
the position of the antenna.
• For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL jack.
• The unit does not support MW radio
reception.
1
Connect the supplied FM wire antenna to
the FM AERIAL socket on the unit.
• The progressive scan video quality is only
available when a progressive scan TV is
connected.
• If your TV does not support progressive scan,
you cannot view the picture.
• For how to activate progressive scan on your
TV, refer to the TV user manual.
Connect a progressive scan TV through
component video for higher quality video.
1
Connect TV
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
You can select the best video connection that
your TV supports.
• Option 1: connect through component
video (for a standard TV or Progressive
Scan TV).
• Option 2: connect through S-Video (for a
standard TV).
• Option 3: connect through composite
video (CVBS) (for a standard TV).
Connect component video cables (red/
blue/green - not supplied) to:
• the VIDEO OUT (Pr/Cr Pb/Cb Y )
sockets on this unit.
• the component input sockets on the
TV.
Option 2: Connect through S-Video
TV
S-VIDEO IN
Option 1: Connect through
component video
Connect a progressive scan TV through
component video for higher quality video.
TV
Pr/Cr
Pb/Cb
Y
COMPONENT VIDEO IN PUT
12
EN
1
Connect an S-video cable (not supplied)
to:
• the S-Video socket on this unit.
• the S-Video socket on the TV.
Option 3: Connect through
composite video
English
Connect power
TV
1
Connect the supplied composite video
cable to:
• the VIDEO OUT socket on this unit.
• the video input socket on the TV.
Caution
Connect audio cables
• Risk of product damage! Ensure that the
TV
L AUDIO OUT R
1
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
1
Connect the AC power cord to the wall
socket.
To play sound from the TV through this
unit, connect audio cables (red/white not supplied) to:
• the AUX IN L/R sockets on this unit.
• the audio output sockets on the TV.
EN
13
4 Get started
Set clock
1
In the standby mode, press and hold
CLOCK to activate the clock setting mode.
» The hour digits are displayed and begin
to blink.
2
Press + VOL - to set the hour, then press
CLOCK again.
» The minute digits are displayed and
begin to blink.
3
4
Press + VOL - to set the minute.
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Press CLOCK to confirm the clock setting.
Turn on
1
Press .
» The unit switches to the last selected
source.
Prepare the remote control
Switch to standby mode
Caution
1
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
Note
• Before you press any function button on the
remote control, first select the correct source
with the remote control.
• If you are not going to use the remote control
for a long time, remove the battery.
14
EN
Press again.
» The clock (if set) appears on the
display panel.
Find the correct viewing
channel
1
2
3
Press
to turn on the unit.
Press DISC to switch to disc mode.
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your TV,
then press the Channel Down button
until you see the Philips screen.
• Press the source button repeatedly
on the remote control of your TV.
•
•
The TV supports progressive scan signals.
You have connected this unit with the TV
through component video.
1
2
Turn on the TV.
3
Switch the TV to the correct viewing
channel for this unit.
4
5
6
Press DISC .
• The video-in channel is between the lowest and
highest channels and may be called FRONT,
A/V IN, VIDEO etc. See the TV user manual on
how to select the correct input on the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
2
3
4
5
Press SYSTEM MENU.
Select [TV Type] and then press
.
Press / to select [Video Setup Page]
in the menu, then press .
Select [Component] > [Pr/Cr Pb/Cb Y],
then press OK .
8
Select [TV Mode] > [P-Scan], then press
OK .
» A warning message is displayed.
9
To proceed, select [Ok] and press OK .
» The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait
To exit the menu, press SYSTEM MENU.
for 15 seconds for auto recovery or turn off
progressive scan manually.
Change system menu language
1
2
3
4
5
Press SYSTEM MENU.
7
Select [Preference Page].
Select a setting and then press OK .
• [PAL] - For TV with PAL color
system.
• [Auto] - For TV that is compatible
with both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
Ensure that the TV progressive scan mode
is deactivated (see the TV user manual).
Press SYSTEM MENU.
10 Turn on the progressive scan mode on
the TV.
Note
Select [General Setup Page].
Select [OSD Language] and then press
Select a setting and then press OK .
To exit the menu, press SYSTEM MENU.
.
• In the progressive mode, if you press DISC
followed by numeric key “1” during normal
play, the progressive scan mode will be turned
off on the unit.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
EN
15
English
Tip
5 Play
Note
• With some disc/file types, play may differ.
Play a disc
Use the disc menu
When you load a DVD/(S)VCD disc, a menu
may be displayed on the TV screen.
To access or exit the menu manually:
1
For VCD with PlayBack Control (PBC)
feature (version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
1
Caution
• Never look at the laser beam inside the unit.
• Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
• Never put any objects other than discs into
the disc compartment.
1
2
Press DISC to select the DISC source.
Press OPEN/CLOSE on the top panel of
the unit.
» The disc tray opens.
3
Place a disc onto the tray and press
OPEN/CLOSE .
» Ensure that the label faces up.
4
Play starts automatically.
• To stop play, press .
• To pause or resume play, press
.
• To skip to the previous/next title/
chapter/track, press / .
If play does not start automatically:
• Select a title/chapter/track and then
press
.
Tip
• To play a locked DVD, enter the 4-digit
parental control password.
Press DISC MENU.
During play, press DISC MENU to
enable/disable PBC.
» When PBC is enabled, the menu
screen is displayed.
» When PBC is disabled, normal play is
resumed.
Select an audio language
You can select an audio language on DVDs,
DiVx video or VCDs.
1
During disc play, press AUDIO.
» The language options appear. If the
selected audio channels is unavailable,
the default disc audio channel is used.
Note
• For some DVDs, the language can only be
changed from the disc menu. Press DISC
MENU to access the menu.
Select a subtitle language
You can select a subtitle language on DVDs or
DivX® Ultra discs.
• During play, press SUBTITLE .
Tip
• For some DVDs, the language can only be
changed from the disc menu. Press DISC
MENU to access the menu.
16
EN
Play DivX video
You can play DivX files copied onto a CD-R/
RW, recordable DVD or USB device.
Note
1
2
• Ensure that the USB device contains playable
music, pictures or video.
1
English
Play from USB
Insert the USB device.
3
a
Insert a disc or connect a USB device.
Select a source:
• For discs, press DISC .
• For USB devices, press USB .
Select a file to play and press
.
• To stop play, press .
• To pause or resume play, press
.
• To change a subtitle language, press
SUBTITLE .
Note
• You can only play DivX videos rented or
purchased through the DivX registration code
of this unit.
• Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .ass) are
supported but do not appear on the file
navigation menu.
• The subtitle filename has to be the same as
the file name of the video.
b
2
3
Play MP3/WMA/picture files
Press USB to select the USB source.
You can play MP3/WMA/picture files copied onto
a CD-R/RW, recordable DVD or USB device.
Press DISC MENU until the folder is
displayed.
1
2
4
Press / to select a folder, then press
to confirm.
5
6
Press / to select a file from the folder.
Press
to start play.
• To stop play, press .
• To pause or resume play, press
• To skip to the previous/next file,
press / .
.
Insert a disc or connect a USB device.
Select a source:
• For discs, press DISC .
• For USB devices, press USB .
3
Press DISC MENU until the folder is
displayed.
4
Press / to select a folder, then press
OK to confirm.
5
6
Press / to select a file from the folder.
Press
to start play.
• To stop play, press .
• To pause or resume play, press
• To skip to the previous/next file,
press / .
EN
.
17
Play control
Resume video play from last stopped
point
Select repeat/shuffle play options
1
During play, press MODE/DIM repeatedly
to select a repeat option or the shuffle
play mode.
• To resume normal play, press
MODE/DIM repeatedly until no
option is displayed.
Repeat A-B (DVD/VCD/CD/MP3/
WMA)
1
During music or video play, press A-B at
the start point.
2
Press A-B at the end point.
» The selected section starts to play
repeatedly.
•
To cancel repeat play, press A-B
again.
Note
Note
• This feature is only available for DVD/VCD
play.
1
In stop mode and when the disc has not
been removed, press
.
To cancel resume mode and stop play
completely:
1
In stop mode, press
.
Play options
Display play information
1
During play, press DISPLAY/RDS
repeatedly to display play information.
Program
• The section A and B can be set only within the
same track/title.
Note
• You cannot program picture files/discs.
Search forward/backward
1
During play, press / repeatedly to
select a search speed.
• To resume play at normal speed,
press
.
Search by time or chapter/track
number
1
18
During video/audio play, press GOTO
until a time field or chapter/track field is
displayed.
• For the time field, enter the play
position in hours, minutes and
seconds.
• For the chapter/track field, enter the
chapter/track.
• Play starts automatically at your
selected point.
EN
For video discs/audio CDs:
1
In stop mode, press ANGLE/PROG to
access the program menu.
2
Enter the tracks/chapters to add to the
program.
3
Repeat step 2 until the program is
complete.
4
Select [Start], then press
program.
to play the
For Divx/MP3/WMA files:
1
During play or in stop mode, press DISC
MENU until the file list is displayed.
2
Select a file, then press ANGLE/PROG to
add the file to the program list.
3
Repeat steps 2 until the program is
complete.
Press
to play the program.
1
To delete a file from the [Program List]:
1
Press DISC MENU until the program list
is displayed.
2
Select a file, then press ANGLE/PROG to
delete the file from the program list.
Zoom in/out image
1
During video/picture play, press
(ZOOM) repeatedly to zoom in/out the
image.
• When the image is zoomed in, you
can press / / / to pan through
the image.
Slow-motion play
1
Picture view options
Preview pictures
1
During play, press .
» The thumbnails of 12 pictures are
displayed.
2
Select one of the following:
• a picture
• the slide show option
• the menu option
• the next/previous page (if available)
3
Press
to:
• play the selected picture
• start slide show of all pictures
• enter the menu where each remote
key function is explained
• turn to the next/previous page (if
available)
During video play, press (SLOW )
repeatedly to select a slow play option.
» The sound is muted.
» To resume play at normal speed, press
.
Change the audio channel
During play, press ANGLE/PROG
repeatedly to select a camera angle.
English
4
Select a slide show play mode
1
Note
During play, press ANGLE/PROG
repeatedly to select a slide-show play
mode.
• This feature is only available for VCD/DivX
play.
Rotate picture
1
During play, press AUDIO repeatedly to
select an audio channel available on the
disc:
• Mono Left
• Mono Right
• Stereo
1
During play, press / to rotate the
picture anti-clockwise/clockwise.
Select a camera angle
Note
• This feature is only available for DVDs
recorded with multiple camera angles.
EN
19
6 Adjust settings
1
2
3
4
Tip
Press SYSTEM MENU.
• Enter this DivX registration code when you
Select a setup page.
Select an option and then press
.
Select a setting and then press OK .
• To return to the previous menu,
press .
• To exit the menu, press SYSTEM
MENU.
General setup
On [General Setup Page], you can set the
following options:
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
4:3 Pan Scan (PS)
•
•
•
4:3 Letter Box (LB)
16:9 (Wide Screen)
[Normal/PS] – For 4:3 screen TV: fullheight display with the trimmed sides.
[Normal/LB] – For 4:3 screen TV: widescreen display with black bars on the top
and bottom of the screen.
[Wide] – For wide-screen TV: display
ratio 16:9.
[OSD Language]
Select the preferred language for on-screen
display.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
• [On] – Enable the screen saver.
• [Off] – Disable the screen saver.
20
[DIVX (R) VOD]
Display the DivX® registration code.
EN
rent or purchase video from http://vod.divx.
com/. The DivX videos rented or purchased
through the DivX® VOD (Video On
Demand) service can be played only on the
device to which it is registered.
Audio setup
On [Audio Setup Page], you can set the
following options:
[SPDIF Setup] > [SPDIF Setup Page] >
[SPDIF Output]
Select audio formats supported by the
connected device.
• [Off] – Turn off the digital output.
• [SPDIF/RAW] – If the connected device
supports multi-channel audio formats,
select this option.
• [SPDIF/PCM] – If the connected device
cannot decode multichannel audio, select
this option.
[Dolby Digital Setup] > [Dual Mono]
Select audio signals output to speakers.
• [Stereo] – Output multichannel sound
signals to both speakers.
• [L-Mono] – Output left mono sound
signals to both speakers.
• [R-Mono] – Output right mono sound
signals to both speakers.
[3D Processing] > [3D Processing Page] >
[Reverb Mode]
Select a virtual surround sound mode.
[HDCD] > [HDCD Setup Page] > [Filter]
When you play a HDCD (High Definition
Compatible Digital) disc, select the audio
output cutoff frequency.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
•
Video setup
[Subtitle]
Select the preferred subtitle language for disc
play.
On [Video Setup Page], you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is
used, this setting is not required.
• [S-Video] – If the S-Video connection is
used, select this option.
• [Pr/Cr Pb/Cb Y] – If the component
connection is used, select this option.
[TV Mode] (TV Mode)
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component] to [Pr/Cr Pb/Cb Y].
• [P-Scan] – For progressive scan TV: turn
on the progressive scan mode.
• [Interlace] – For ordinary TV: turn on the
interlace mode.
[Quality] > [Video Quality Setup]
Customize picture color settings.
•
[Auto] - For TV that is compatible with
both PAL and NTSC.
[NTSC] - For TV with NTSC color
system.
English
movies at a low volume, without disturbing
others.
• [On] – enjoy quiet viewing at night
(DVDs only).
• [Off] – enjoy surround sound with its full
dynamic range.
[Audio]
Select the preferred audio language for disc
play.
[Disc Menu]
Select the preferred disc menu language.
Note
• If the language you have set is not available on
the disc, the disc uses its own default language.
• For some discs, the subtitle/audio language can
only be changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
Press OK .
Select a rating level, then press OK .
Press the numeric keys to enter the password.
Note
• Rated discs above the level you set in
[Parental] require a password to be played.
• The ratings are country-dependent. To allow
all discs to play, select [8 Adult].
Preference setup
On [Preference Page], you can set the following
options:
[TV Type]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] - For TV with PAL color system.
• Some discs have ratings printed on them but
are not recorded with ratings. This function
has no effect on such discs.
Tip
• You can set or change the password.
EN
21
[Default]
Resets all the settings of this unit to factory
default, except for the password and parental
settings.
[Password Setup] > [Password Setup Page] >
[Password Mode]
This setting allows you to enable/disable the
password for parental control. If the password
is enabled, when you play a prohibited disc,
this 4-digit password is required.
• [On] - Enable the password for parental
control.
• [Off] - Disable the password for parental
control.
[Password Setup] > [Password Setup
Page] > [Password]
You can change password here. The
default password is 1234.
• [Change]
1) Press the numeric keys to enter ‘1234’ or
your last set password at [Old Password]
field.
2) Enter the new password at [New
Password] field.
3) Enter the new password again at [Confirm
PWD] field.
4) Press OK to exit the menu.
7 Tune to FM
radio stations
1
2
3
4
Ensure that you have connected and fully
extended the supplied FM antenna.
Press TUNER .
Press and hold
/
.
When the frequency indication starts to
change, release the button.
» The FM tuner tunes to a station with
strong reception automatically.
5
Repeat steps 3-4 to tune to more
stations.
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
• You can program a maximum of 20 preset
radio stations.
Note
• If you forget the password, enter ‘1234’ before
you set a new password.
1
Press / to select a preset number to
start programing.
2
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed briefly.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programed radio station is
broadcast automatically.
22
EN
Note
8 Adjust volume
level and sound
effect
English
Program radio stations
manually
• You can program a maximum of 20 preset
radio stations.
Adjust volume level
1
2
Tune to a radio station.
Press ANGLE/PROG to activate
programming.
1
3
Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
Select a sound effect
4
Repeat the above steps to program other
stations.
During play, press VOL +/- to increase/
decrease the volume level.
Note
• You cannot use different sound effects at the
same time.
Note
• To overwrite a programmed station, store
another station in its place.
Select a preset sound effect
1
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Tip
• You can also use the numerical keypad to
select a preset station directly.
During play, press DSC repeatedly to
select:
• [ROCK] (rock)
• [JAZZ] (jazz)
• [POP] (pop)
• [CLASSIC] (classic)
• [FLAT] (flat)
Enhance bass
1
To turn on bass enhancement, press
LOUD/DBB repeatedly during play until
the DBB logo is displayed.
• To turn off bass enhancement, press
LOUD/DBB repeatedly until the
DBB logo disappears.
EN
23
Select automatic loudness control
Automatic loudness control increases the
treble and bass effect at low volume levels
(the higher the volume, the lower the treble
and bass levels).
1
To turn on automatic loudness control,
press LOUD/DBB during play until the
loudness icon is displayed.
• To turn off automatic loudness
control, press LOUD/DBB until the
loudness icon disappears.
9 Other features
Activate demonstration mode
You can see an overview of all features.
1
In standby mode, press STOP on the main
unit to activate the demonstration mode.
» A demonstration of major available
features starts.
To deactivate the demonstration mode:
1
Mute sound
1
During play, press MUTE to mute/unmute
sound.
Listen through headphone
1
Plug a headphone into the
the unit.
Press STOP on the main unit again.
Adjust brightness of display
panel
1
socket on
In standby mode, press MODE/DIM
repeatedly to select different levels of
brightness for the display panel.
Set the alarm timer
1
2
Ensure that you have set the clock correctly.
In standby mode, press and hold SLEEP/
TIMER .
» The hour digits are displayed and begin
to blink.
3
Press + VOL - to set the hour.
» The minute digits are displayed and
begin to blink.
4
5
6
Press + VOL - to set the minute.
Press SLEEP/TIMER to confirm.
To activate the wake-up timer, press +
VOL - to select [ON] (on).
» A clock icon appears on the display.
» The unit turns on automatically at
the set time and switches to the last
selected source.
» To deactivate the alarm timer, select
[OFF] (off) at step 6.
24
EN
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
» The unit turns off automatically after
the set period of time.
2
3
Select the MP3 Link/AUX source.
Start play on the audio player.
English
Set the sleep timer
Record to a digital recorder
You can record audio from this unit to a digital
recorder.
Connect other devices
Listen to an audio player
You can listen to audio player through this
unit.
1
1
Connect a coaxial cable (not supplied) to:
• the COAXIAL socket
• the digital input socket on the digital
recorder
2
3
Play audio to be recorded.
Begin to record on the digital recorder
(see the digital recorder user manual).
Connect the audio player.
• For audio players with red/white
audio output sockets:
Connect a red/white audio cable
(not supplied) to the AUX IN L/R
sockets and to the audio output
sockets on the audio player.
• For audio players with headphone
sockets:
Connect the supplied MP3 Link cable
to the MP3 LINK socket and to the
headphone socket on the audio
player.
EN
25
10 Product
information
Note
• Product information is subject to change
without prior notice.
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
EN
87.5 - 108MHz
50KHz
<22 dBf
>43 dBf
>28dBf
<3%
>50dB
Speaker Impedance 4ohm
Speaker Driver
4”
Sensitivity
>80dB/m/W±4dB/m/W
General information
Semiconductor
12cm/8cm
MPEG-1 / MPEG-2 /
DivX
12Bits
PAL / NTSC
4:3 / 16:9
>48dB
24Bits / 96kHz
Video DAC
Signal System
Video Format
Video S/N
Audio DAC
Total Harmonic
Distortion
<0.1% (1 kHz)
Frequency Response 4Hz - 20kHz (44.1kHz)
4Hz - 22kHz (48kHz)
4Hz - 24kHz (96kHz)
S/N Ratio
>65dBA
26
Tuning Range
Tuning grid
Sensitivity - Mono,
26dB S/N Ratio
Sensitivity - Stereo,
46dB S/N Ratio
Search Selectivity
Total Harmonic
Distortion
Signal to Noise
Ratio
Speakers
2X25W RMS
20 -20000 Hz, ±3dB
>65dB
0.5 V RMS 20kohm
Disc
Laser Type
Disc Diameter
Video Decoding
Tuner (FM)
AC power
Operation Power
Consumption
Standby Power
Consumption
Composite Video
Output
Coaxial Output
Headphone
Output
USB Direct
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
Weight
- With Packing
- Main Unit
- Speaker Box
220V, 50Hz
50W
<4W
1.0Vp-p, 75ohm
0.5Vpp ± 0.1Vpp 75ohm
2X15mW 32ohm
Version 2.0
200 x 120 x 265mm
150 x 250 x 165 mm
7.7 kg
2.73 kg
2 x 1.62 kg
USB playability information
•
•
•
•
Compatible USB devices:
• USB flash memory (USB 2.0 or USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with this apparatus)
•
•
•
•
•
Digital Video Discs (DVDs)
Video CDs (VCDs)
Super Video CDs (SVCDs)
Digital Video Discs + Rewritable
(DVD+RW)
Compact Discs (CDs)
Picture (Kodak, JPEG) files on CDR(W)
DivX(R) disc on CD-R(W):
DivX 3.11, 4.x and 5.x
WMA
Supported MP3-CD formats:
• ISO 9660
• Max. title/album name: 12 characters
• Max. title number plus album: 255.
• Max. nested directory: 8 levels.
• Max. album number: 32.
• Max. MP3 track number: 999.
• Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
• Supported Bit-rates of MP3 disc are: 32,
64, 96, 128, 192, 256 (kbps).
• The following formats are not supported:
• Files like *.VMA, *.AAC, *.DLF,
*.M3U,
• *.PLS, *.WAV
• Non-English Album/Title name
• Discs recorded in Joliet format
• MP3 Pro and MP3 with ID3 tag
Supported formats:
• USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
• Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
EN
27
English
Supported disc formats
11 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcom), or contact Philips (see
Contact information). When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.
No power
•
Ensure that the AC cord of the apparatus
is connected properly.
•
Ensure that there is power at the AC
outlet.
•
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at
the lens has cleared.
•
Replace or clean the disc.
•
Use a finalized CD or correct format disc.
No picture
•
Check the video connection.
•
Turn on the TV to the correct Video-In
channel.
•
Progressive scan is activated but the TV
does not support progressive scan.
28
EN
Black and white or distorted picture
•
The disc does not match the TV color
system standard (PAL/NTSC).
•
Sometimes a slight picture distortion may
appear. This is not a malfunction.
•
Clean the disc.
•
A distorted picture may appear during
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
•
The aspect ratio if fixed on the loaded
DVD disc.
•
The aspect ratio may not be changed for
some TV systems.
No sound or poor sound
•
Adjust the volume.
•
Disconnect the headphones.
•
Check that the speakers are connected
correctly.
•
Check if the stripped speaker wires are
clamped.
Remote control does not work
•
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities
(+/– signs) aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the
sensor on the front of the unit.
Disc does not play
•
Insert a readable disc and ensure that the
label side faces up.
•
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•
Press SYSTEM MENU to exit the system
setup menu.
•
Disable the password for parental control
or change the rating level.
•
Moisture has condensed inside the
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
English
•
Poor radio reception
•
Increase the distance between the unit
and your TV or VCR.
•
Fully extend the FM antenna.
•
Connect an outdoor FM antenna instead.
Unable to select Progressive Scan
•
Ensure the video output mode is set to
[Pr/Cr Pb/Cb Y].
Audio or subtitle languages cannot be set
•
The disc is not recorded with sound or
subtitles in multiple languages.
•
The audio or subtitle language setting is
prohibited on the disc.
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•
The formats of these files are not
supported.
USB device not supported
•
The USB device is incompatible with the
unit. Try another one.
Timer does not work
•
Set the clock correctly.
•
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
•
EN
29
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
MCD302_93_UM_V3.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising