Operator`s Manual - Ideal Satellite Services

Operator`s Manual - Ideal Satellite Services
LEXIUM FastAlign® 5100Pro
Operator’s Manual
LEXIUM
FastAlign® 5100Pro
Digital Satellite Meter
www.LEXIUM-DVB.com
0
Dear Customers:
Please read this manual seriously for the first time using and keep
for future reference.
Make fully charging before using first time. (Charged 4 hours first time
but no more than 6 hours)
Warning: This meter equipped with lithium polymer batteries to supplying
working power, please do not place in high-temperature, high
humidity environment, even not in the fire. The company does not
bear the responsibility for the loss of improper operation.
Don’t disassemble any parts of meter by yourself, because
every part should be fixed by authorized engineers. If the
meter needs fix, please phone us or mail meter to us.
Type in your city’s latitude & longitude firstly. Methods are in operating
instructions.. Visit www.dishpointer.com for your latitude & longitude.
1
Contents
...................................................4
.....................................................5
Notice.
Battery Notice .
.............................................5
Charger Notice..
...........................................6
Cleaning and Maintenance .
...................................6
Irresponsible Statements .
.....................................6
...................................................7
Function.
One. View contents instructions.
................................7
(1). Angles calculation Section.
.................................7
(2). Parameters setting Section.
.................................8
(3).Serial-no. section of user-defined & local satellite channel list.
....8
Synopsis
2
.......9
(5) Measurement section.
.....................................10
......................................11
Two. Panel instructions.
Three. The first time using.
...................................13
1. Supply power by OUTPUT port.
.............................13
.............................................14
2.Power on/off.
3. Type in current coordinate.
.................................15
Four. Find Satellite manually.
.................................16
1. Type in parameters.
.......................................16
2. Signal measurement.
.......................................18
3. Signal searching.
..........................................18
Five. Find satellite with intrinsic local channel list.
...............2 0
(4) Setting of latitude and longitude & function display section
3
...................21
Seven. Move parameter from local to user-defined channel list.
.....21
Six. Find satellite with user-defined channel list
Eight. Modify and save parameters in local & user-defined channel
........................................................22
Nine. Delete parameters in user-defined channel list.
..............22
..................................22
Ten. Restore Factory Setting.
Eleven. Online.
.............................................23
Twelve. Technical parameters.
.................................23
........................................24
Thirteen. Accessories.
list
4
Synopsis:
Satellite Finder which can help you to finish installation and
orientation of satellite quickly and conveniently, the signal respond
rapidly. Even get weak signal, meter also can show the ratio of
S/N.
According to your location and orientated satellite’s longitude, the
meter will calculate the azimuth angle, elevation and polarization
automatically, which to be shown in graphic. Through prompt
message and carefull tuning, you can find satellite quickly and
accurately.
The meter has set global satellite channel list, which can download
updated channel list with PC and set local visible satellite channel
list by your location, meanwhile, you can make a user-defined
channel list which can save 100 satellite parameters.
This meter equipped with lithium polymer batteries to supplying
working power for high-frequency head, thus avoiding the need to
carry other heavy equipment and more easily in the work of the
antenna positioning. Even without the battery or battery power is
used up, the receiver can also be used for power supply equipment.
Simple operation mode and information-rich interface predigest your
operating process.
5
Pictures and files just made for reference. If there is any difference,
refer to the real products.
Notice:
Avoid bumping, shaking, dropping or throwing.
Avoid flammable gas, high temperature and moist sphere or
dusty place.
Do not disassemble or refit for avoiding destroy, creepaging or
electrical fault.
Do not press keys by sharp objects as this will cause damage
or faulty operation.
Battery Notice:
Do not expose the battery in fire as it will result in explosion.
Do not disassemble and refit battery or solder its port. Do not
put near fire, heater or high temperature place.
If there is transudation, smelly, abnormal warming or
distortion in using, cut-off at once and consult the
manufacturer.
Do not charge over the specified time.
Battery’s service life is limited and using time will become
shorter. Please change when repeated charging failure.
Dispose batteries according to local regulations. Do not
dispose as household waste.
6
Charger Notice:
Please use special accessory input power.
Do not charge when it short circuit or power-line broken as it
will result in electric shock and fire.
Do not disassemble, refit the charger.
Keep the charger in dry place for avoiding short circuit.
Do not use wet hand to insert or pull-out the charger and touch
wire or outlet.
Do not pull the electrical cord strongly, when pull out the
outlet as it will result in destroy, fire or electric shock.
To be sure free from extreme temperatures, sunshine, moist or
vibration.
Cleaning and Maintenance:
Do not expose the meter and charger to liquid, moisture or
humidity as it is not waterproof. Please shut down and dry it or
consult the manufacturer in case it was watered.
Please clean the meter and charger periodically with soft dry
cloth. Do not use alcohol, thinner or benzene solution to clean
them.
Irresponsible Statements:
This meter adopts creditable design scheme and filters every
semiconductor component strictly. Main CMOS chip and devices
7
were selected form famous manufacture’s products. Every meter was
tested and checked severely, which can work 72 hours continuously. We
can ensure their durability and reliability.
Our products are guaranteed for a year, but we will not take on users’
mistake, accident or misuse. Even other man-made accident in meter
broke-down, and earthquake, flood or any other natural disaster
and deliberate or unexpected abusing.
We also have no responsibility for any loss caused by not using
special customized software or hardware and not according to the
manual.
Function instructions:
One. View contents instructions: Fig.1
Fig.1
:
(1) Angel calculation section:
Section A: Satellite azimuthe:
8
For example:The number is 42°,Antenna’s figure in compass
is on the top left corner of screen. Triangle cursor point at leftside,
means that this satellite is by east 42° as NS (south & north) is 0°.
Contrariwise is by west 42°.
Section E:
:Elevation;
;
For example:The number is 39°, which shows that level is 0° and
39° up.
Section P:
:Polarization;
;
For example:The number is +33° and the arrow is clockwise,
which shows that antenna’s jig is 0°. Sign of radio-frequency head
tuner is coincident. Face to the antenna, 33° is rotating clockwise,
-33° is anticlockwise.
Note:
:The calculating of azimuthe is according to actual south
& north directions. If use compass, you should consider to add
or minus local declination, which can be searched on web.
(2) Parameters setting section:
:
L:
:Satellite Longitude;
9
F:
:Downstream Frequency;
SR:
:Symbol Rate;
LO:
:Local Oscillation Frequency;
LNB:
:13(vertical)
、18V(level)polarization transform;
:It means that ON is power on, without ON is
22KHz Control:
power off;
(3) Serial number section of user-defined and local satellite
channel list:
User-defined channel list can save 100 user-defined satellite
parameters, and add frequently-used parameters in it. After
power-on, the cursor points at this section, and press
and
to add or cut serial numbers. Select a parameter which to be
found. This meter has built-in global satellite channel list, and
reserved 300 locations. When type in user’s city longitude and
latitude, meter will select and display local channel list
automatically. The way to enter into is that press
10
for 3
seconds after powered, screen will show
that serial-number in
local satellite channel list. Move cursor to serial number section
and press
and
to add or delete serial numbers or to
select satellite’s longitude and parameter. Then press
seconds, this figure
for 3
will disappear, which means back to
user-defined channel list state.
Built-in channel list is a primal setting. You can modify
and save them except add or delete any satellite. New channels
can be added in user-defined channel list. Operation method is
in manually input section as Four. 1.
(4) Setting of latitude and longitude & functions display section:
LONG:
:Longitude
LAT: Latitude
:Press
, it twinkles to tell you this item has been saved.
:In local channel list state..
:Press it for 3 seconds,
means the sound of finding is
11
turned off. Press 3 seconds again sound is turned on.
:Has linked with PC
:Shows current battery electrical-power,
twinkles to remain
you that low battery and meter needs charge.
(5) Measurement section:
: Fixed a satellite’s parameter, you
should move cursor to serial number section and press 0 to 9. Then
the meter begins to measure signal.
Leftward of region
S;Q Column diagram,Display signal strength and percentage of
signal quality.
Rightward of region
S:
:Actual value of signal strength
S/N:
:Carrier noise ration of current frequency
B:
:Bit error rate
: The signal has been locked.
Two. Panel intro: Fig.2
12
Fig. 2
(1) INPUT port: It connects with LNB port.
(2) OUTPUT port: When without battery or low battery, connect
this port with input-port of satellite’s receiver, then open receiver
to supply power for meter and input signal to receiver.
(3) LCD Graphic Display: The LCD with backlight.
(4) Option Key & switch key between satellite and user-defined
13
Channel list:
Press once cursor will move downwards circularly.
Long-press 3 seconds, screen will switch between satellite and
user-defined channel list.
(5) Number position Key; Backlight Key:
Single-press: Cursor of fixed item moves leftwards
Long-press: 3 seconds turn on or off backlight.
(6) Number position Key; Mute Key:
Single-press: Save modified fixed item
Long-press: 3 seconds turn on or off of finding tone.
(7) Save & delete Key:
Single-press: Saved Cursor of fixed item moves rightwards
Long-press: Delete fixed item.
(8) Roll-in & measurement unit switch key:
Single-press, move parameters in local channel list to user-defined
channel list.
(9) Number Keys:Input numbers from 0 to 9. When cursor in
serial-number section, press any key to begin and shut satellite
finding. Long-press 0 key for 3 seconds, you will enter into local
longitude & latitude modifying state.
(10) POWER:On—Off key.
14
(11) Working status indicator, red light is charging, green light
is working.
(12) A data port connects with PC
(13) Charging port
(14) Loudhailer
Three. The first time using
Pleade in the shutdown state to charge batteries for the first time
using,this product used lithium polymer batteries for powered
equipment, please choose the companie supplied rechargeable
batteries and charger. Otherwise, there will be a burst or leaking
batteries and so on, Charging time of 4 hours or more, but not
more than 6 hours.
It can work 4 hours continually in fully charged, which is decided
by the consumption of radio-frequency head and batteries. The
consumption is larger, the working time is shorter.
1. Charging by OUTPUT Port:
:
The input port of satellite’s receiver can supply power for the
meter, when it low battery or without batteries in working.
Connect receiver’s its under power output port with meter’s
OUTPUT port to supply power, to finish working and input the
signal to receiver. As shown in Fig. 3
15
Fig. 3
This power supply mode just a measure for low battery in finding
process. If you have electrical source, use it to supply power, but don’t load
operation with charger and receiver too long. After operation finished, go on
charging for the meter in power-off state for next using.
2. Power on/off:
:
Press Power Key till open with music and enter into main
menu. Press again is Power off. As shown in Fig. 4.
16
Fig. 4
:
3. Input current coordinate:
Before using, you should type in your city’s latitude and
longitude coordinates which can be inquired on INTERNET.
First, move cursor to serial-number section and press 0 key 3
seconds. The cursor will move to the section of longitude and
latitude. As shown in Fig. 5
17
Fig. 5
For example: Type in longitude 117E,latitude 39N。
Press
button, move cursor to LONG,use
or
key to select a numerical value. Now cursor is twinkling, use
numeral key to type in 117 ,(When percentile is 0 and it is empty,
this position will not twinkle. If you want to type number in
percentile, just press button 1 because the maximum value of
)
or
longitude & latitude is 180 . Use
key to select E or W,
when E or W twinkles, press any key from 0 to 9, make letter
switches between E or W,then choose E. The input of longitude
achieved.
Press
key, move cursor to LAT. Type in 39 by
or
key to opt N or S,when N or S twinkled,press 0 to 9—any
key. Then it will switch between N or E,fix N. The input of
latitude achieved.
Press 0 key 3 seconds to exit this operation. The cursor will
back to serial-number section. The setting achieved.
18
Four. Manual Seeking Satellite
1. Type in parameters:
:
In user-defined channel list, put cursor in serial-number section.
Press
or
to change serial-number, select an empty
parameter position. Press
key to move cursor, choose L、F、
SR、LO、LNB、22KHz apart so as type in needful parameters. The
way of typing L item,such as type 146E:
key to make cursor points at L,use
Press
or
key
to select a needful value. This position will twinkle and type in 146
by numeral key,(When percentile is 0 and it is empty, this position
will not twinkle. If you want to type number in percentile, just
press button 1 because the maximum value of longitude & latitude is
180
).
Use
or
key to select E or W,when E or W
twinkled, press any key from 0 to 9, make the letter to switch
between E or W,then choose E. The input of longitude achieved.
19
Press
key to keep on next parameter’s inputting.
Change pressure of polarize and 22KHz on-off. Cursor points at
these two parameters, select by any key 0 to 9 selecting.
When all parameters input over, press
to save. Then the
cursor will back to serial-number section automatically. All these
parameter were saved in current serial-number.
Note: When L is typed, the meter will calculate azimuth,
elevation and polarization, according to local longitude &
latitude. No data will be displayed when typed in exotic
longitude & latitude. Screen will Indicate you that this satellite
below the horizon.
2. Signal measurement:
:
Checking cursor must be put in serial-number section, then press
any key from 0 to 9 that meter begins to measure a signal. When
INPUT port connects with LNB, meter can detect LNB yawp and
display electrical level value. This illuminates that LNB is trouble
free and connects with meter normally. As shown in Fig. 6
20
Fig. 6
:
3. Signal searching:
Put compass’s direction in meter in keeping with actual direction
of earth. Tune the antenna according to the angle gave in meter,
along with signal becomes nearer, meanwhile beep tone becomes
louder and sharper. The strength value is increasing. When find
week signal, meter will test out S/N ratio & bit error rate. As
shown in Fig. 7
21
Fig. 7
Keep tuning antenna to increasing value of S/N. When signal
exceed threshold value, you will hear a sound for locking this
signal.
means the signal has been locked. As shown in
Fig. 8
Fig. 8
Continue to tuning antenna S/N to maximum, in order to put it in
best position, then fix the antenna well. As shown in Fig. 9
22
Fig. 9
Note:
:In measurement state press
or
key, which can
let parameter of F item is adjusted as 1MHz stepper. Press
key to save, this modified value will be saved in current serial
number. If you don’t save it, this parameter will renew to
original state, when you change serial-number.
it will twinkle for showing low battery, so user needs to charge
battery in time or by receiver. Or else, it’ll automatically turn off.
Even the meter can work for while in low battery, but it cannot
keep LNB power supply.
Five. Find satellite by built-in local channel list:
:
In built-in local channel list, press
23
3 seconds, shows at the
lower right corner of screen, at the same time, cursor points at serial-number
section. Press
or
to change serial-number and to search
needful parameters. Press any key form 0 to 9 to finding satellite
Six. Find satellite with user-defined channel list:
You can save frequently-used parameters in this list, that they
can be found easily in operating.
In user-defined channel list, press
3 seconds,
disappears at the lower right corner of screen and cursor points at
serial-number section. Press
or
to change serial-number
and to search needful parameters. Press any key form 0 to 9 to
finding satellite.
Seven. Move a parameter from local to user-defined channel
list:
This function can move frequently-used parameters from local
channel list to user-defined list. Operational approach as follows:
Press
3 seconds enter into local channel list state, then press
or
displays
key to select frequently-used parameters. Screen
while you press
, and displays serial-number’s
position in serial-number section which saved in user-defined
24
channel list.
Eight. Modify and save parameters in local & user-defined
channel list:
:
In local or user-defined channel list, press
key to move the
cursor. Then choose L、F、SR、LO、LNB、22KHz apart. Press
or
to select modified parameter and press
key to
save. Meantime cursor back to serial-number section, operation
achieved. In this state L item cannot be modified.
In measurement state only press
or
key to modify
parameters in F item,other items cannot be modified. First, close
measurement state to modify other items.
Nine. Delete parameters in user-defined channel list:
:
In user-defined channel list, select a serial-number to delete, then
press
3 seconds all items will be deleted.
Ten. Restore Factory Setting:
:
25
Type in 9876 immediately, about 5 seconds later, then meter
will restart and back to factory setting. All saved and modified
contents were cleared. Please use this function cautiously.
:
Eleven. Online:
Connect with PC to download software and operation guide of
update channel list. Please log on http://www.satellitecaptor.com
Twelve. Technical parameters
1. Input Frequency Range: 950~2150MHz
2. Signal field intensity range: 30dBuV-105dBuV
3. Measurement Unit:dBmV;dBµV;dBm
4. Measurement Accuracy:±1.5dB
5. Input Resistance:75Ω
6. Symbol Rate:2Msps-45Msps
7. Sub-body mode:F
8. Measurement item:signal strength; bit error rate; S/N
9. QPSK switch:automatic identification
26
10. 22Kcontrol: sustain.
11. Audio-output:loudhailer
12. Display:Block code wide-temperature LCD
13. Memory content:
300 reserved positions of global atellite
channel,100 user-defined channels
14. LNB Power Supply:13V,18V, ≤500mA
15. Interface mod:USB
16. Adapter power supply:AC110V/60Hz/220V/50Hz±10%
17.Meter’s direct current input voltage:DC13.5V/1A
18. OUTPUT-port input voltage range:DC12-23V
19. Battery working time:Fully charged, the meter will
work about 4 hours continuously. There will be
inaccuracy difference according to high-frequency
27
head’s electric quantity. (Please use manufacturer
supplied chargeable batteries)
20. Charging time:larger than 4 hours and no longer than 6
hours.
21. Working Temperature:0~40℃
22. Storage Temperature:-10~50℃
23. Exterior size:142*82*35(mm)
24. Weight:0.28 Kg without battery,0.42Kg with battery
25. Gross weight:0.9 Kg
Thirteen.
Accessories
Special charger:
1 piece
RF input commutator: 2 pieces
Date line:
1 piece
28
Operator’s Manual:
1 piece
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising