HDMI optical output board including
4K, 3D and Deep Color with reclocking function
Part No: 9113 0030 (LC), 9113 0031 (ST), 9113 0032 (SC), 9113 0033 (NT)
Built-in HDMI to fiber converter
Selectable connectors: Neutrik OpticalCON, -LC, -SC, -ST
Four status LEDs per port: receiver detect, signal detect, HDCP enabled, Laser active
No video compression
Zero frame delay
Extension distance: 2500 m (up to 1920 x 1200 @ 60Hz), 1100m (4096 x 2048 @ 30Hz)
HDMI 1.4a; DVI and HDCP compliant
4K x 2K @ 30 Hz, 1080p @ 120 Hz, 2560 x 1600, 2048 x 2048, HD video resolutions
and all 3D formats are supported
36-bit deep color support
Dolby TrueHD and DTS-HD Master Audio
Advanced EDID Management and Frame Detector
Pixel Accurate Reclocking
Built-in test pattern generator
One bi-directional RS-232 channel per port
MX-HDMI-3D-OB-R is an 8 channel multimode optical output board providing HDMI 1.4, audio and
RS-232 extension over a single multimode fiber up to 2500m distance. Pixel Accurate Reclocking,
HDCP compliance and HDMI to DVI conversion are all incorporated. Resolutions up to 4K and 36-bit
color depth are handled with all standard audio formats as well as 120Hz 3D signals.
Along the video and audio extension the unit provides a bi-directional RS-232 option for remote
controlling external devices like projectors or professional media players.
The video signals with the HDCP, EDID handshaking data and the RS-232 channel traffic are performed
over one Multimode fiber utilizing our Single Fiber Technology. The board is compatible with Dolby
TrueHD and DTS-HD audio while Pixel Accurate Reclocking, Advanced EDID Management, Frame
detector and built-in test pattern generator are integrated providing the highest level of setup and
usage. The board is available with Neutrik OpticalCON, -LC, -SC or -ST connectors.
Compatible products:
HDCP compliancy:
RS232 passthrough:
9600, 19200, 38400, 57600,
115200 baud/s; 8-N-1
(max. 60 bytes/message)
3D signal compatibility:
Frame packing, side-by-side,
Power consumption (3.3 V)
(all connector type):
1.4 A (typ.), 1.5 A (max.)
Power consumption (5 V)
(all connector type):
0.9 A (typ.), 1.5 A (max.)
Calculated AC Power
(all connector type):
9.2 W (typ.), 12.5 W (max.)
Heat dissipation
(all connector type):
32 BTU/h (typ.),
43 BTU/h (max.)
1350 g (LC, SC, ST)
1500 g (NT)
Output connectors:
Optical wavelengths:
778 nm, 800 nm, 825 nm,
850 nm, 911 nm, 980 nm
Available patterns:
■■ Receivers:
DVI-OPT-RX110 (DVI only, without HDCP and RS-232)
DVI-OPT-RX220-Pro (DVI only, without HDCP and RS-232)
HDMI-OPT-RX100 (up to 1080p60 36bpp, without RS-232)
HDMI-OPT-RX100R (up to 1080p60 36bpp)
HDMI-OPT-RX200R (up to 1080p60 36bpp)
HDMI-3D-OPT-RX150RA (up to 4K)
MX-HDMI-OPT-IB (up to 4K)
Maximum extension distances
OM1 (62.5/125) OM2 (50/125) OM3 (50/125) OM4 (50/125)
1920x1080p@60Hz 24 bpp
250 m
600 m
1200 m
2500 m
1920x1080p@60Hz 36 bpp
150 m
400 m
800 m
1300 m
4096x2048@30Hz 24bpp
Not supported
350 m
700 m
1100 m
Peterdy 15, Budapest H-1071, Hungary
+36 1 255 3800
Solid red
Solid green
Solid blue
Solid black
Solid white
Color bars
Test pattern generator video formats:
480p, 576p, 720p, 1080p, 1080p deep color
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF