LAN/Datacomm TESTERS
www.eclipsetools.com
114
co
s.
nt
ne
po
Magnification/Lighting
LAN/Datacomm
om
ec
lin
on
TESTERS
m
TESTERS
Butt Set
Description
Part No.
Butt-Set
400-042
m
Best Value – compare to TS22A”
“Data Safe Monitor Mode”
s.
nt
Neck strap
TESTERS
Headset
po
• LCD display for dialing number, Caller ID, Clock and other information
• Indicator for determine the Net service and speed
• Headset & neck strap provide convenien hand-free function
• Smart power saving, estimate battery life
• 62 Caller ID memories, each memory up to 16 digits
• 16 dialing number memories, each number up to 16 digits
• Support 2 dialing modes: Tone (DTMF) and pulse
• Up to 16 digits phone number memory for speed dialing key
• Pre-dialing and last number redial function
• PBX pause key, insert a PBX pause in stored numbers
• Cable continuity & Tel. line polarity indicator
• RJ-45 port for extension change cord
• Standard alligator clip
• Auto Busy Redial
co
Data Safe ADSL Mode
Telecom Mini-Test Set
ne
• Amplified speaker for both Talk and Monitor Modes (battery operated)
• 12 memory positions
• Last number redial function
• Moisture and dust-resistant housing
• Profile of design allows test set to be easily held (hands-free) between shoulder and head
• Lightweight, compact design
• 9V battery included
• Dimension:
11.2" x 2.8" x 2.8"
om
Accessories
Incoming and dialing number display
ec
RJ-45 Jack
NET service detection
lin
Description
Part No.
MT-8002
on
Telecom Test Set
Alligator clips
Test Lead (Professional Clip Style)
In-Line Modular Adapters
Inside
Cable Tester
Butt Set
• Modular tester 8 pin Female
to 8 pin Female
Tone Probe kit
• Professional grade “Bed of Nails” insulation piercing clips within the jaws
• Ultra-durable nylon braided jacket
• Guarantee ruggedness and flexibility
• Non-insulated ring terminals
• Connect directly to 400-042 butt set
• Length: 60 inch
• Materials: Nylon, Copper
• Color: Red/Black
• 6 pin Female
to 8 pin Male
• 4 pin Female
to 8 pin Male
Multimeter
• 6 pin to 8 pin 8"
• 8 pin to 6 pin 8"
• 8 pin to 4 pin 8"
Description
Part No.
Description
Part No.
Test Lead (Professional Clip Style)
902-267
In-Line Modular Adapters
900-244
115
e
Valu
t
s
e
B
Economy Multimeter
•AC/DC voltage up to 600V
•DC current up to 10A
•Resistance 200-2M ohms
•hFE: 1-1000
•Diode test
•Data hold
•9V power
Description
Part No.
Economy Multimeter
400-014
Digital Multimeter
• Resistance: 400Ω±1.2%,4K/40K/400K/
4MΩ±1.0%,40MΩ±2.0%
• Capacitance: 4nF±5%,40nF±2.0%,
400nF±0.5%,4µF±1.0% 40µF±1.5%
• Frequency: 10/100/1K/10K/100K/1M/10MHZ±0.5%
• Auto power-off
• Power: AA(1.5V)x2
• Dimension: 6-1/4” x 3-1/4” x 1-3/4” (Without soft protection rubber case)
• Battery included
400-043
s.
Part No.
Digital Multimeter
nt
Description
co
m
• Display: 3999 counts, Digit is 25mm high.
• Data hold
• Continuity checking with buzzer
• Diode test
• Relative measurement
• hFE: 1~1000
• DC Voltage: 400mV±0.5%,4/40/400/1000V ±0.8%
• AC Voltage: 200mV±1.2%,2/20/200/750V±1.5%
• DC Current: 400µ/4m/40m/400mA±1.0%, 10A±2.0%
• AC Current: 400µ/4m/40m/400mA±1.5%, 10A±2.5%
ne
po
Detects Studs, Metal and Voltage
om
TESTERS
3-IN-1 Auto-Detector
Description
Part No.
3-IN-1 Auto-Detector
400-032
B
on
lin
This meter is one of a series of portable, professional
measuring instruments capable of performing the following functions:
• DC and AC voltage measurement
• DC and AC current measurement
• Resistance measurement
• Capacitance measurement
• Diode and Transistor test
• Audible continuity test
• Temperature measurement
• Frequency measurement
lue
a
V
t
es
ec
20AMP Digital Multimeter
Protective Function Analog Multimeter
• Durable reliable vibration-proof and patented protection circuit
• Double-sided glass epoxy through hole resist finish
• Protective function preventing mixed measurements
• Resistance, current and low-range voltage.
• DCV: 0.1/0.5/2.5/10/50/250/1000V (DC 20KΩ/V)
• DCA: 50µ/2.5m/25m/250m/10A
• ACV: 10/50/250/1000V (AC 9KΩ/V)
• Resistance: 1/10/1K/10KΩ
• Capacitance:
C1(Rx1K): 2000µF,
• Battery: 1.5Vx@2+9Vx@1
• Continuity checking with buzzer
There are different functions and 32 ranges
provided. A rotary switch is used to select
functions as well as ranges.
GENERAL:
• Maximum voltage between terminals and earth ground
• Fuse protection
• Power Supply
• Display
• Measuring method
• Overrange indication
• Polarity indication
• Operating temperature
• Storage temperature
• Low battery indication
116
1000V dc or 700V rms ac (sine)
mA: F 200mA/250V (A: unfused)
9V battery
LCD, 1999 counts, updates 2-3/sec
Dual-slope integration A/D converter
"1" figure only on the display
"–" displayed for negative polarity
0°C to 40°C (32°F to 104°F)
–10°C to 50°C (10°F to 122°F)
"
" appears on the display
Description
Part No.
20AMP Digital Multimeter
400-047
Description
Protective Function Analog Multimeter
Part No.
902-136
Auto-Ranging Professional Digital Multimeters
Part No.
Auto-Ranging Professional Digital Multimeters
902-243
co
Description
m
• 3 3/4 digit Display(4,000 counts), Large LCD Display, LCD window size: 45x25 mm.
• Auto-ranging functions.
• Touch Switch buttons respectively for Relative Test(REL), Data Hold-on(Data-H) except for Frequency Range, Back-lighting(BLCTR) and Function select (Func) for AC/DC Inter-change, Buzzer/Diode inter-change .
• Hight sensitivity of 100µV.
• Impedance: 10MΩ on all DCV&ACV ranges.
• Double-injection Plastics case(ABS + TPE).
• Good Protection by PTC, Two Fuses & Diode on the ranges of Current, Resistance, Voltage.
• Power-saving design to keep battery long life.
• Auto Power-Off once no operating after 20 minutes.
• Continuity Test, Transistor Test, Diode test, LED checky, Auto-zeroing.
• DC Voltage: 400m~1000V(±1.0% of rdg+2 Digits).
• AC Voltage: 4~750V(±1.5% of rdg+5 Digits).
• DC Current: 400µ~400mA(±1.2% of rdg+2 Digits), 10A(±2.0% of rdg+3 Digits).
• AC Current: 400µ~400mA(±1.5% of rdg+3 Digits), 10A(±2.5% of rdg+5 Digits).
• Resistance: 400~4MΩ(±1.0% of rdg+2 Digits), 40MΩ(±2.0% of rdg+4 Digits).
• Capacitance: 4nF(±5.0% of rdg+25 Digits), 40nF(±2.5% of rdg+10 Digits), 400nF
(±0.8% of rdg+3 Digits) 4µF(±1.5% of rdg+2 Digits), 100µF(±2.0% of rdg+2 Digits).
• Frequency: 10~2MHz(±0.5% of rdg+2 Digits), 2M~20MHz(±2.5% of rdg+2 Digits).
• Temperature: -20~1000ºC(±2.0% of rdg+2 Digits), 0~1800ºF(±2.5% of rdg+2 Digits).
• Power: 6F22 9V battery 1pc.
• Size: 147 x 75 x 40 mm.
• Weight: 270g with battery.
• This instrument complies with insulation category (over voltage category), CAT II1000V.
• Pollution degree 2 in accordance with IEC-664.
om
po
TESTERS
ne
nt
s.
Professional 3 1/2 Digital Multimeters
• 3 1/2 digit Display (1,999 Counts), Large LCD Display, LCD window size: 45x25 mm
• Back Light for LCD with button and automatically turn-off after 10 sec.
• Push-type Switch buttons respectively for Data Hold-on(HOLD), Back-lighting
(BLCTR) and AC/DC Inter-change.
• Hight sensitivity of 100µV.
• Impedance: 10MΩ on all DCV&ACV ranges.
• Double-injection Plastics case(ABS + TPE).
• Good Protection by PTC, Two Fuses & Diode on the ranges of Current, Resistance, Voltage.
• Continuity Test, Transistor Test, Diode test, LED check, Automatic low battery, Auto-zeroing.
• DC Voltage: 200mV(±0.5% of rdg+1 Digit), 2/20/200V(±1.0% of rdg+2 Digits), 1000V(±1.5% of rdg+2 Digits).
• AC Voltage: 200mV(±1.0% of rdg+3 Digits), 2/20/200V(±1.5% of rdg+3 Digits), 750V(±2.5% of rdg+4 Digits).
• DC Current: 200µ/2m/20m/200mA(±1.2% of rdg+2 Digit), 10A(±2.0% of rdg+3 Digits).
• AC Current: 200µ/2m/20m/200mA(±1.5% of rdg+3 Digits), 10A(±2.5% of rdg+5 Digits).
• Resistance: 200Ω(±1.2% of rdg+2 Digits), 2K/20K/200K/2MΩ(±1.0% of rdg+2 Digits),
20MΩ(±2.5% of rdg+4 Digits).
• Power: 6F22 9V battery 1pc.
• Size: 147 x 75 x 40 mm.
• Weight: 260g with battery.
• This instrument complies with insulation category (over voltage category), CAT II 1000V.
• Pollution degree 2 in accordance with IEC-664.
Description
Part No.
ec
Professional 3 1/2 Digital Multimeters
902-248
lin
Digital Earth Resistance Tester
on
• Capable of measuring earth voltage (Vac.)
• 2mA measuring current permits earth resistance to test without
tripping earth leakage current breakers in the circuit.
• Battery operated.
• Auto power off function.
• Data hold function.
• Small and light weight.
SpecifIcations
IEC 1010 CAT.III
Description
Digital Earth Resistance Tester
Part No.
8PK-ST1520
Measurement ranges
Earth resistance
0-20Ω/0-200Ω/0-2000Ω
Earth voltage
0-200V AC (40-500Hz)
Accuracy
Earth Resistance ±(2% rdg+2dgt)
Earth Voltage ±(1% rdg+2dgt)
Earth resistance
resolution
0-20Ω(0.01Ω)
0-200Ω(0.1Ω)
0-2000Ω(1Ω)
Measurement system
Earth resistance by constant current
inverter 820Hz APPROX. 2mA.
Low battery indication
“B” symbol appears on the display
Data hold indication
“DH” symbol appears on the display
Over range indication
“1” (MSD)
Open circuit indication
LED will be unlit
Display LCD
3-1/2 digit (2000 counts)
Power source
1.5V(SUM-3) x 6. Type AA.
Dimensions (mm)
163(L) x 100(W) x 50(D)
Weight
480g approx.(battery included)
Accessories
Test leads (red 15m yellow-10m
green-5m), Auxiliary earth bars.
Heavy-duty case, Instruction manual
117
Receptacle Tester
• Auto scans twisted pairs for shorts/opens/mis-wiring
• USOC4/6/8 testing
• RJ45/RJ12/RJ11 connector capability
• Designed to test intentionally crossed pairs or straight through pairs
• Remote terminator allows testing of already installed cables
Part No.
Description
Multi-Modular Cable Tester
400-004
Receptacle Tester-Standard
co
Description
m
Multi-Modular Cable Tester
400-029
400-030
s.
Receptacle Tester-GFCI Outlets
Part No.
Circuit Breaker Identifier
3PK-NT040C LAN cable testers are intelligent continuity testers for LAN cables which save time
on the job. Their intuitive operation keep you from wasting time working through complex menus.
•Quickly identifies and locates 110 ~ 125 VAC circuit breakers and fuses. Not necessary to interrupt power.
•Audible tone generated
when matching breaker is located
•An easy way to identify location of circuit breaker on the circuit breaker panel box which is
connected to a specific outlet
lin
ec
om
po
TESTERS
ne
• Comes with 8 identifier remotes and carrying case
nt
Lan Cable Tester
Part No.
on
Description
Lan Cable Tester
3PK-NT040C
disco
unt
ema
s on r
ining
Stock
057
MT-7
y
b
aced
Repl
118
400-031
d
e
u
n
onti
Disc
ible
Poss
Part No.
Mini-LAN Tester
Cable Sniffer with Remote
•Tests RJ45 CAT5, USB, and BNC
•5 LED’s
•Performs tests of Shorts and Opens
•9V Battery powered (not included)
Description
Circuit Breaker Identifier
• This Mini-LAN Tester is a small, hand-held tool for verifying, troubleshooting and quickly diagnosing problems during a LAN installation.
• This tester offers easy operation.
• Simply push the “TEST” button and the LEDs quickly give a clear indication of the LAN status.
Description
Part No.
Description
Part No.
Cable Sniffer with Remote
400-019
Mini-LAN Tester
400-018
Economy LAN Cable Tester w/Remote
LAN/LINK Identifier
•Link status
•10/100mbps
•Full/Half duplex
•Receive data
•HUB/Switch/NIC blink
•No Link or Fault
•Battery low indicator to ensure accurate results
• Hub & NIC Status
• Check in Loopback or Installed/Remote mode
• Tests Shielded and Unshielded twisted pair cable (STP/UTP)
• 9V Battery not included
Part No.
Description
Part No.
Economy LAN Cable Tester w/Remote
400-021
LAN -Tester
400-040
m
Description
LAN Cable Tester with Remote
Description
on
PC Cable Tester
Part No.
Description
Part No.
400-001
Multi-Modular Cable Tester
400-026
TESTERS
•Tests RJ45, 10 Base-T, Token Ring, RJ11/12 USOC and Coaxial Cables
•Checks continuity, shorted/open and crossed wire pairs
•Coaxial cable tested for shorted or open shield as well as center conductor breaks
•LED’s on both units allow for one person testing
•9V Battery not included
lin
Standard configuration, RJ45/BNC Cables
ec
om
po
ne
nt
s.
co
Multi-Modular Cable Tester
• Tests most common PC and network related cables for opens, shorts and pin-to-pin connections
• Automatic / Variable speed scan mode
• USB(A) & USB(B) & Firewire connectors, (400-007 only)
• Operates on external 9V positive center pin adaptor, (not included)
• Enhanced LED glow for shorted printer cable test
• Connector types include:
• 36 pin Centronics
• 9, 15 & 25 pin D-Subminiature
• 15 pin High Density D-Sub
• BNC
• 8P8C RJ45 Modular Jack (shielded)
• USB(A) & USB (B) and 1394 Connectors (model 400-007 only)
Description
Part No.
PC Cable Tester With USB Connectors (as shown)
400-007
119
Current Probe
Hand Held Digital Clamp Meter
• LCD size : 0.6" x 1.9" display:1999 counts
• Max. Diameter for conductor: ø60mm
• DC Voltage : 1000V±0.8%
• AC Voltage : 600V±1.2%
• AC Current : 200-600A±2%, 600-1000A±3%
• Resistance : 200Ω / 20KΩ±1%
• Continuity check : Built in buzzer will sound.
• Data hold : Provided
• Power: 9V Battery
Part No.
Description
Current Probe
400-022
Hand Held Digital Clamp Meter
6HP-9150
6HP-9250
x10
x1
x10
No
x1
x10
x1
x10
902-074
nt
ne
po
Switchable series
ec
om
6HP-9100
x1
Readout
lin
6HP-9060
Attn.
No
on
TESTERS
• Switchable X1/X10 attenuation with reference switch positions.
• Break-resistant center conductor & wide compensation range.
• Flatter response, sharper leading edges.
• Faster rise time and replaceable cable probe head tip and ground lead.
• Max. input voltage: 600V (DC-peak AC).
• Includes BNC adapter, IC tip, insulating tip & trimming tool.
Model No.
Part No.
s.
Description
Oscilloscope Probe Kit
No
No
Input impedance
Band width
Resetime
1MΩ 90PF
6MHz
58ns
10MΩ 18PF
60MHz
5.8ns
1MΩ 47PF
6MHz
58ns
10MΩ 16PF
100MHz
3.5ns
1MΩ 47PF
6MHz
58ns
10MΩ 15PF
150MHz
2.3ns
1MΩ 47PF
6MHz
58ns
10MΩ 14PF
250MHz
1.4ns
Dual Telephone Line Tester
Max input V
600VDC
600VDC
600VDC
600VDC
Compensation range
NA
10-35PF
NA
10-35PF
NA
10-35PF
NA
10-35PF
Telecom Tester
• Tester two lines in Same RJ11 jack
• Protects modem (Digital systems provide high current phone lines that can damage most computer
modems. Since both safe analog lines and dangerous
digital lines use the same type of connectors, it is impossible
to visually determine if a phone line is safe. Use Voltage
Valet’s Digital Phone Line Tester before you plug in to
detect high-current digital telephone lines that can
damage your computer modem.)
120
co
m
•SMT Application
•Display: Digital and analog display. 3999 counts and 42 segments bar graph.
• Digit is 9mm high
•DC Voltage:400V/600V ±1.0%
•AC Voltage: 400V/600V ±1.5%
•AC Current : 40A/400A ±2.0%
•Max. Diameter for conductor: ø1.1"
•Resistance : 400Ω±1.0%
•Data hold
•Continuity Test
•Autorange and manual range
•Back Light
•Power: AAA (1.5V) x 2
• Inexpensireand effective
• The tele-check
• Inscrt the plug
Description
Part No.
Description
Part No.
Dual Telephone Line Tester
400-028
Telecom Tester
400-017
lue
a
V
t
es
All-in One Toner & Probe Kit
Tone Generator and Probe Set
B
Features:
• Locates cables quickly and easily
• Locates hidden cables
• Isolates the right cable or pair fast
• Overcome noise and save time
• Tone on live networks safely and
effectively
• Verify conductor continuity with
cable map
• Identify and troubleshoot cable
services RJ45/RJ11/USB and
Coax
Item #: 400-011C
Applications:
• Copper cabling media, including
shielded (STP) and UTP cable.
• 75 or 50 Ohm coaxial cable
• 10 Base-T or 10/100 Base-T
datacom net works
• Two conductor control, security,
generic cabling
• POTS telecom service
• Testing range: 1500 meters
Item #: 400-011B
•Comes with a canvas carrying pouch and belt loop for convenient portability
4 Testers in One
m
Description
Pouch from 400-011
co
Tone Generator and Probe Set
Part No.
Probe from 400-011
All-in One Toner & Probe Kit
902-228
Tone generator from 400-011
400-011
400-011A
400-011B
400-011C
s.
Description
Part No.
8-Way Coaxial Cable Mapper
Ideal for electrical troubleshooting detecting a live AC source and locating a burned-out bulb in
a series. Detects AC voltage without connection into the wire circuit. Very bright LED and buzzer
alarm informs you that voltage is present. Pen-shaped design for easy carrying and storage.
ne
The 8 way coaxial cable mapper is designed to find and identify multiple coax cables. It is a
hand-held device for CATV and security system installers who test multi-run coax systems
terminated with F-connectors, or those who wish to map runs to a central bundle. It can be
used to put a tone signal on a coax cable. With eight individual remote terminators, it’s ideal
for mapping coax installations.
8 Serial-number Terminators
Part No.
Description
Part No.
NT-303
8-Way Coaxial Cable Mapper
NT-301
on
Non-Contact AC Detector
lin
Description
ec
om
po
• Test Volt: 90-240V AC 50-60Hz
• Instant Indication: Bright LED on end Beeper sound intermittently
• Contents : AC voltage detector, Precision screwdriver and 2 “AAA” batteries
TESTERS
nt
Non-Contact AC Detector
Mini-Pocket Tester
Mini-Pocket Tester Kit with adaptors
The cable test detects DC continuity or shorts using a loud audible tone and an easy
to read LED.
The system has a DC generator/short detector and a removable tone detector that
screws into the base.
NT-302 cable tester supports coaxial cable with F-connectors. With the addition of a wide
range of optional adapters, you can test telephone, LAN, audio, security, or virtually any other
type of wire or cable easily.
KITS includes:
• NT-302 cable tester
• F-81 F double female adapter
• 2 F double male adapter
• 2 F push-on male to female adapters
• 2 RCA male to F-female adapters
• 2 RCA female to F-male adapters
• 2 BNC male to F female adapters
• 2 BNC female to F-female adapters
• 2 RJ-11 adapters
• 2 RJ-45 adapters
• 5 F Female to PAL Female
6
5
Tone
F male
detector to RCA
of NT-302 female
4
RCA cable
3
2
1
NT-302
Mini Pocket Tester
F male F double
to RCA connector
female
Operating Instructions
Main section
of NT-302
Description
Part No.
Description
Part No.
Cable Test
NT-302
8 Way Coaxial Cable Mapper W/8 Serial Number Terminator
NT-3200
121
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising