Compact enclosures
inTEG Compact Enclosures
Dimensions mm
Height
Width
Enclosure type/material
Depth
Single-door enclosure
300
200
155
300
250
155
300
300
155
300
300
210
300
400
155
300
400
210
400
300
155
400
300
210
400
400
210
400
600
210
400
600
250
500
300
210
500
400
210
500
400
250
500
500
210
500
500
300
600
400
210
600
400
250
600
400
300
600
600
600
600
600
600
600
700
700
800
800
800
800
800
1000
1000
1000
1000
1000
1200
1200
1200
1200
500
600
600
600
600
800
800
500
500
600
600
600
800
800
600
600
600
800
800
600
600
800
800
250
210
250
300
400
250
300
210
300
250
300
400
300
400
250
300
400
300
400
300
400
300
400
600
800
800
1000
1000
1000
1000
1200
1200
1200
1200
1400
800
1000
1200
1000
1000
1200
1200
1000
1000
1200
1200
1000
300
300
300
300
400
300
400
300
400
300
400
300
Sheet steel
Glazed door
Outdoor
Stainless
steel 304
Stainless steel
316L
WME‑030215
WME‑032515
WME‑030315
WME‑030321
WME‑030415
WME‑030421
WME‑040315
WME‑040321
WME‑040421
WME‑040621
WME‑040625
WME‑050321
WME‑050421
WME‑050425
WME‑050521
WME‑050503
WME‑060421
WME‑060425
WME‑060403
WME‑G‑030215
WME‑G‑032515
WME‑G‑030315
WME‑G‑030321
WME‑G‑030415
WME‑G‑030421
WME‑G‑040315
WME‑G‑040321
WME‑G‑040421
WME‑G‑040621
WME‑G‑040625
WME‑G‑050321
WME‑G‑050421
WME‑G‑050425
WME‑G‑050521
WME‑G‑050503
WME‑G‑060421
WME‑G‑060425
WME‑G‑060403
WME‑O‑030215
–
WME‑O‑030315
WME‑O‑030321
WME‑O‑030415
WME‑O‑030421
WME‑O‑040315
WME‑O‑040321
WME‑O‑040421
WME‑O‑040621
–
–
WME‑O‑050421
–
WME‑O‑050521
WME‑O‑050503
WME‑O‑ 060421
–
WME‑O‑ 060403
WME‑X‑030215
–
WME‑X‑030315
WME‑X‑030321
WME‑X‑030415
WME‑X‑030421
WME‑X‑040315
WME‑X‑040321
WME‑X‑040421
WME‑X‑040621
–
–
WME‑X‑050421
–
WME‑X‑050521
WME‑X‑050503
WME‑X‑060421
–
–
WME‑XX‑030215
–
WME‑XX‑030315
WME‑XX‑030321
WME‑XX‑030415
WME‑XX‑030421
WME‑XX‑040315
WME‑XX‑040321
WME‑XX‑040421
WME‑XX‑040621
–
–
WME‑XX‑050421
–
WME‑XX‑050521
WME‑XX‑050503
WME‑XX‑060421
–
–
WME‑G‑060525
–
WME‑G‑060621 WME‑O‑ 060621
WME‑G‑060625
–
WME‑G‑060603 WME‑O‑ 060603
WME‑G‑060604 WME‑O‑ 060604
WME‑G‑060825
–
WME‑G‑060803 WME‑O‑060803
WME‑G‑070521
–
WME‑G‑070503 WME‑O‑ 070503
WME‑G‑080625 WME‑O‑ 080625
WME‑G‑080603 WME‑O‑ 080603
WME‑G‑080604
–
WME‑G‑080803 WME‑O‑ 080803
WME‑G‑080804
–
WME‑G‑100625
–
WME‑G‑100603 WME‑O‑ 100603
WME‑G‑100604 WME‑O‑ 100604
WME‑G‑100803
–
WME‑G‑100804 WME‑O‑ 100804
WME‑G‑120603 WME‑O‑ 120603
WME‑G‑120604
–
WME‑G‑120803
–
WME‑G‑120804 WME‑O‑ 120804
Double-door enclosure
WME‑160803 WME‑G‑160803
–
WME‑181003 WME‑G‑181003
–
WME‑181203 WME‑G‑181203
–
WME‑201003 WME‑G‑201003
–
WME‑201004 WME‑G‑201004
–
WME‑201203 WME‑G‑201203
–
WME‑201204 WME‑G‑201204
–
WME‑221003 WME‑G‑221003
–
WME‑221004 WME‑G‑221004
–
WME‑221203 WME‑G‑221203
–
WME‑221204 WME‑G‑221204
–
WME‑241003 WME‑G‑241003
–
–
WME‑X‑060621
WME‑X‑060625
WME‑X‑060603
–
–
WME‑X‑060803
–
WME‑X‑070503
WME‑X‑080625
WME‑X‑080603
–
WME‑X‑080803
–
–
–
–
WME‑X‑100803
–
–
–
WME‑X‑120803
WME‑X‑120804
–
WME‑XX‑060621
WME‑XX‑060625
WME‑XX‑060603
–
–
WME‑XX‑060803
–
WME‑XX‑070503
WME‑XX‑080625
WME‑XX‑080603
–
WME‑XX‑080803
–
–
–
–
WME‑XX‑100803
–
–
–
WME‑XX‑120803
WME‑XX‑120804
–
–
–
WME‑X‑201003
–
–
–
WME‑X‑221003
–
–
–
–
–
–
–
WME‑XX‑201003
–
–
–
WME‑XX‑221003
–
–
–
–
WME‑060525
WME‑060621
WME‑060625
WME‑060603
WME‑060604
WME‑060825
WME‑060803
WME‑070521
WME‑070503
WME‑080625
WME‑080603
WME‑080604
WME‑080803
WME‑080804
WME‑100625
WME‑100603
WME‑100604
WME‑100803
WME‑100804
WME‑120603
WME‑120604
WME‑120803
WME‑120804
Compact enclosures
Conteg, spol. s r.o.
Czech Republic Headquarters:
Na Vítězné pláni 1719/4
140 00 Prague 4
INDUSTRIAL • INNOVATIVE • INDIVIDUAL • INSPIRING
Tel.: +420 261 219 182
Fax: +420 261 219 192
Production plant in the Czech Republic:
K Silu 2179
393 01 Pelhřimov
Tel.: +420 565 300 300
Fax: +420 565 533 955
Sheet steel enclosure
conteg@conteg.com
www.conteg.com
Local Branches/Offices
Austria: +43 170 659 0115
Benelux: +32 477 957 126
Eastern Europe / Nordics:
+49 172 8484 346
France, Maghreb: +33 686 074 386
Germany / Switzerland: +49 170 523 4958
India:
+91 991 6950 773
Middle East: +971 4445 2838
Russia, CIS: +7 495 967 3840
Saudi Arabia: +966 594 30 13 08
Ukraine: +380 674 478 240
Stainless steel enclosure
Enclosure with glazed door
Although this catalog was prepared, produced and checked with the best care, Conteg, spol. s r.o. cannot accept any liability for omissions or errors in this publication. Due to the continuous development
and progress, Conteg, spol. s r.o. also reserves the right to change details and technical specifications of the products shown in this catalogue. Such changes along with eventual errors or printing errata shall
not constitute grounds for compensation.
Enclosure for outdoor application
www.conteg.com
www.conteg.com
inTEG compact enclosures
Advantages and specifications
Our compact inTEG enclosures have a smooth design thanks to the latest laser-welding technology. Their body provides high rigidity and
is compatible with many applications in the industrial, electrical engineering and automation fields. Each of the enclosure' s 54 dimensions
are made with either plain or glazed doors. The range includes powder-coated stainless steel enclosures as well as stainless steel enclosures
for applications that need more protection from the environment. The internal equipment can be installed quickly without the need
of additional accessories.
The inTEG compact enclosures are designed with regard to the user – practical and effective. Standard sizes and
accessories are in stock.
Customized solutions
In an effort to meet the increasing demands of our customers, we can
make additional adjustments to enclosures according to individual
request and requirements.
Easy and quick installation of accessories
Individual cutouts and holes by laser
• Cutouts are done before the final surface finish to
ensure the powder coating on the entire surface
of the enclosure has the highest possible quality
• Enclosures can be individually customized by
using our on-line configurator
• Prices for cutouts in steel and stainless steel are
the same
Perforated mounting rails on door
• From enclosure height of 500 mm
• Easier installation of door components
• Increased rigidity of the door
MAIN ADVANTAGES
•
•
•
•
•
•
•
•
•
•
•
Smooth design thanks to laser welding
54 dimensions from 300x200x155 mm up to 1400x1000x300 mm
Single-door and double-door enclosures
Materials: sheet steel, stainless steel 304 or 316L, powdercoated stainless steel
Maximum dimensions available for mounting plate
Stability and robustness
High rigidity of rear panel
Wide range of accessories
Rear panel with holes ready for direct wall mounting
Wide selection of safety stickers
Possibility of placing your logo or special label on enclosure
according to your requirements
TECHNICAL SPECIFICATION
• IP66 dust and water protection – single-door enclosures
• IP55 dust and water protection – double-door enclosures
• Mechanical resistance IK10 (IK08 for enclosures with glazed door)
• RAL7035 standard color (other colors available upon request)
• PUR non-porous gasket on door(s)
• Zinc-plated mounting plate with labeled grids
Individual labeling
• Simple change of door hinges from right to left
• Printed on adhesive foil
• Possibility of placing your logo or individual
descriptions
• Full-color
• Maximum printing size 300x420 mm
• 130° angle door opening
Perforated mounting rails on side panels
• From enclosure depth of 250 mm
• Screwed to body of enclosure
• Comfort installation of components
on side panels
• Perforations in 25 mm step
Wide selection of safety sticker
Zinc-plated mounting plate
Online configurator at
www.conteg.com
• Labeled raster 50x50 mm
• Easy setting of installed components and DIN rails
• Maximum dimensions of mounting plate
Rear panel with mounting holes
• Standard for all type and dimensions
• Easy solution for direct wall mounting
• Possibility of pole mounting with special
accessories
Rain canopy
• Light construction – no extra weight for enclosure
• In combination with stainless steel powder-coated
enclosure – solution for outdoor application
• Stickers are printed by UV LED technology, which
ensure high-quality for lifetime use
• Customized dimensions and stickers available
in different languages
www.conteg.com
inTEG compact enclosures
Advantages and specifications
Our compact inTEG enclosures have a smooth design thanks to the latest laser-welding technology. Their body provides high rigidity and
is compatible with many applications in the industrial, electrical engineering and automation fields. Each of the enclosure' s 54 dimensions
are made with either plain or glazed doors. The range includes powder-coated stainless steel enclosures as well as stainless steel enclosures
for applications that need more protection from the environment. The internal equipment can be installed quickly without the need
of additional accessories.
The inTEG compact enclosures are designed with regard to the user – practical and effective. Standard sizes and
accessories are in stock.
Customized solutions
In an effort to meet the increasing demands of our customers, we can
make additional adjustments to enclosures according to individual
request and requirements.
Easy and quick installation of accessories
Individual cutouts and holes by laser
• Cutouts are done before the final surface finish to
ensure the powder coating on the entire surface
of the enclosure has the highest possible quality
• Enclosures can be individually customized by
using our on-line configurator
• Prices for cutouts in steel and stainless steel are
the same
Perforated mounting rails on door
• From enclosure height of 500 mm
• Easier installation of door components
• Increased rigidity of the door
MAIN ADVANTAGES
•
•
•
•
•
•
•
•
•
•
•
Smooth design thanks to laser welding
54 dimensions from 300x200x155 mm up to 1400x1000x300 mm
Single-door and double-door enclosures
Materials: sheet steel, stainless steel 304 or 316L, powdercoated stainless steel
Maximum dimensions available for mounting plate
Stability and robustness
High rigidity of rear panel
Wide range of accessories
Rear panel with holes ready for direct wall mounting
Wide selection of safety stickers
Possibility of placing your logo or special label on enclosure
according to your requirements
TECHNICAL SPECIFICATION
• IP66 dust and water protection – single-door enclosures
• IP55 dust and water protection – double-door enclosures
• Mechanical resistance IK10 (IK08 for enclosures with glazed door)
• RAL7035 standard color (other colors available upon request)
• PUR non-porous gasket on door(s)
• Zinc-plated mounting plate with labeled grids
Individual labeling
• Simple change of door hinges from right to left
• Printed on adhesive foil
• Possibility of placing your logo or individual
descriptions
• Full-color
• Maximum printing size 300x420 mm
• 130° angle door opening
Perforated mounting rails on side panels
• From enclosure depth of 250 mm
• Screwed to body of enclosure
• Comfort installation of components
on side panels
• Perforations in 25 mm step
Rain canopy
Zinc-plated mounting plate
Online configurator at
www.conteg.com
• Labeled raster 50x50 mm
• Easy setting of installed components and DIN rails
• Maximum dimensions of mounting plate
Rear panel with mounting holes
• Standard for all type and dimensions
• Easy solution for direct wall mounting
• Possibility of pole mounting with special
accessories
• Light construction – no extra weight for enclosure
• In combination with stainless steel powder-coated
enclosure – solution for outdoor application
Wide selection of safety sticker
• Stickers are printed by UV LED technology, which
ensure high-quality for lifetime use
• Customized dimensions and stickers available
in different languages
www.conteg.com
inTEG compact enclosures
Advantages and specifications
Our compact inTEG enclosures have a smooth design thanks to the latest laser-welding technology. Their body provides high rigidity and
is compatible with many applications in the industrial, electrical engineering and automation fields. Each of the enclosure' s 54 dimensions
are made with either plain or glazed doors. The range includes powder-coated stainless steel enclosures as well as stainless steel enclosures
for applications that need more protection from the environment. The internal equipment can be installed quickly without the need
of additional accessories.
The inTEG compact enclosures are designed with regard to the user – practical and effective. Standard sizes and
accessories are in stock.
Customized solutions
In an effort to meet the increasing demands of our customers, we can
make additional adjustments to enclosures according to individual
request and requirements.
Easy and quick installation of accessories
Individual cutouts and holes by laser
• Cutouts are done before the final surface finish to
ensure the powder coating on the entire surface
of the enclosure has the highest possible quality
• Enclosures can be individually customized by
using our on-line configurator
• Prices for cutouts in steel and stainless steel are
the same
Perforated mounting rails on door
• From enclosure height of 500 mm
• Easier installation of door components
• Increased rigidity of the door
MAIN ADVANTAGES
•
•
•
•
•
•
•
•
•
•
•
Smooth design thanks to laser welding
54 dimensions from 300x200x155 mm up to 1400x1000x300 mm
Single-door and double-door enclosures
Materials: sheet steel, stainless steel 304 or 316L, powdercoated stainless steel
Maximum dimensions available for mounting plate
Stability and robustness
High rigidity of rear panel
Wide range of accessories
Rear panel with holes ready for direct wall mounting
Wide selection of safety stickers
Possibility of placing your logo or special label on enclosure
according to your requirements
TECHNICAL SPECIFICATION
• IP66 dust and water protection – single-door enclosures
• IP55 dust and water protection – double-door enclosures
• Mechanical resistance IK10 (IK08 for enclosures with glazed door)
• RAL7035 standard color (other colors available upon request)
• PUR non-porous gasket on door(s)
• Zinc-plated mounting plate with labeled grids
Individual labeling
• Simple change of door hinges from right to left
• Printed on adhesive foil
• Possibility of placing your logo or individual
descriptions
• Full-color
• Maximum printing size 300x420 mm
• 130° angle door opening
Perforated mounting rails on side panels
• From enclosure depth of 250 mm
• Screwed to body of enclosure
• Comfort installation of components
on side panels
• Perforations in 25 mm step
Rain canopy
Zinc-plated mounting plate
Online configurator at
www.conteg.com
• Labeled raster 50x50 mm
• Easy setting of installed components and DIN rails
• Maximum dimensions of mounting plate
Rear panel with mounting holes
• Standard for all type and dimensions
• Easy solution for direct wall mounting
• Possibility of pole mounting with special
accessories
• Light construction – no extra weight for enclosure
• In combination with stainless steel powder-coated
enclosure – solution for outdoor application
Wide selection of safety sticker
• Stickers are printed by UV LED technology, which
ensure high-quality for lifetime use
• Customized dimensions and stickers available
in different languages
www.conteg.com
inTEG Compact Enclosures
Dimensions mm
Height
Width
Enclosure type/material
Depth
Single-door enclosure
300
200
155
300
250
155
300
300
155
300
300
210
300
400
155
300
400
210
400
300
155
400
300
210
400
400
210
400
600
210
400
600
250
500
300
210
500
400
210
500
400
250
500
500
210
500
500
300
600
400
210
600
400
250
600
400
300
600
600
600
600
600
600
600
700
700
800
800
800
800
800
1000
1000
1000
1000
1000
1200
1200
1200
1200
500
600
600
600
600
800
800
500
500
600
600
600
800
800
600
600
600
800
800
600
600
800
800
250
210
250
300
400
250
300
210
300
250
300
400
300
400
250
300
400
300
400
300
400
300
400
600
800
800
1000
1000
1000
1000
1200
1200
1200
1200
1400
800
1000
1200
1000
1000
1200
1200
1000
1000
1200
1200
1000
300
300
300
300
400
300
400
300
400
300
400
300
Sheet steel
Glazed door
Outdoor
Stainless
steel 304
Stainless steel
316L
WME‑030215
WME‑032515
WME‑030315
WME‑030321
WME‑030415
WME‑030421
WME‑040315
WME‑040321
WME‑040421
WME‑040621
WME‑040625
WME‑050321
WME‑050421
WME‑050425
WME‑050521
WME‑050503
WME‑060421
WME‑060425
WME‑060403
WME‑G‑030215
WME‑G‑032515
WME‑G‑030315
WME‑G‑030321
WME‑G‑030415
WME‑G‑030421
WME‑G‑040315
WME‑G‑040321
WME‑G‑040421
WME‑G‑040621
WME‑G‑040625
WME‑G‑050321
WME‑G‑050421
WME‑G‑050425
WME‑G‑050521
WME‑G‑050503
WME‑G‑060421
WME‑G‑060425
WME‑G‑060403
WME‑O‑030215
–
WME‑O‑030315
WME‑O‑030321
WME‑O‑030415
WME‑O‑030421
WME‑O‑040315
WME‑O‑040321
WME‑O‑040421
WME‑O‑040621
–
–
WME‑O‑050421
–
WME‑O‑050521
WME‑O‑050503
WME‑O‑ 060421
–
WME‑O‑ 060403
WME‑X‑030215
–
WME‑X‑030315
WME‑X‑030321
WME‑X‑030415
WME‑X‑030421
WME‑X‑040315
WME‑X‑040321
WME‑X‑040421
WME‑X‑040621
–
–
WME‑X‑050421
–
WME‑X‑050521
WME‑X‑050503
WME‑X‑060421
–
–
WME‑XX‑030215
–
WME‑XX‑030315
WME‑XX‑030321
WME‑XX‑030415
WME‑XX‑030421
WME‑XX‑040315
WME‑XX‑040321
WME‑XX‑040421
WME‑XX‑040621
–
–
WME‑XX‑050421
–
WME‑XX‑050521
WME‑XX‑050503
WME‑XX‑060421
–
–
WME‑G‑060525
–
WME‑G‑060621 WME‑O‑ 060621
WME‑G‑060625
–
WME‑G‑060603 WME‑O‑ 060603
WME‑G‑060604 WME‑O‑ 060604
WME‑G‑060825
–
WME‑G‑060803 WME‑O‑060803
WME‑G‑070521
–
WME‑G‑070503 WME‑O‑ 070503
WME‑G‑080625 WME‑O‑ 080625
WME‑G‑080603 WME‑O‑ 080603
WME‑G‑080604
–
WME‑G‑080803 WME‑O‑ 080803
WME‑G‑080804
–
WME‑G‑100625
–
WME‑G‑100603 WME‑O‑ 100603
WME‑G‑100604 WME‑O‑ 100604
WME‑G‑100803
–
WME‑G‑100804 WME‑O‑ 100804
WME‑G‑120603 WME‑O‑ 120603
WME‑G‑120604
–
WME‑G‑120803
–
WME‑G‑120804 WME‑O‑ 120804
Double-door enclosure
WME‑160803 WME‑G‑160803
–
WME‑181003 WME‑G‑181003
–
WME‑181203 WME‑G‑181203
–
WME‑201003 WME‑G‑201003
–
WME‑201004 WME‑G‑201004
–
WME‑201203 WME‑G‑201203
–
WME‑201204 WME‑G‑201204
–
WME‑221003 WME‑G‑221003
–
WME‑221004 WME‑G‑221004
–
WME‑221203 WME‑G‑221203
–
WME‑221204 WME‑G‑221204
–
WME‑241003 WME‑G‑241003
–
–
WME‑X‑060621
WME‑X‑060625
WME‑X‑060603
–
–
WME‑X‑060803
–
WME‑X‑070503
WME‑X‑080625
WME‑X‑080603
–
WME‑X‑080803
–
–
–
–
WME‑X‑100803
–
–
–
WME‑X‑120803
WME‑X‑120804
–
WME‑XX‑060621
WME‑XX‑060625
WME‑XX‑060603
–
–
WME‑XX‑060803
–
WME‑XX‑070503
WME‑XX‑080625
WME‑XX‑080603
–
WME‑XX‑080803
–
–
–
–
WME‑XX‑100803
–
–
–
WME‑XX‑120803
WME‑XX‑120804
–
–
–
WME‑X‑201003
–
–
–
WME‑X‑221003
–
–
–
–
–
–
–
WME‑XX‑201003
–
–
–
WME‑XX‑221003
–
–
–
–
WME‑060525
WME‑060621
WME‑060625
WME‑060603
WME‑060604
WME‑060825
WME‑060803
WME‑070521
WME‑070503
WME‑080625
WME‑080603
WME‑080604
WME‑080803
WME‑080804
WME‑100625
WME‑100603
WME‑100604
WME‑100803
WME‑100804
WME‑120603
WME‑120604
WME‑120803
WME‑120804
Compact enclosures
Conteg, spol. s r.o.
Czech Republic Headquarters:
Na Vítězné pláni 1719/4
140 00 Prague 4
INDUSTRIAL • INNOVATIVE • INDIVIDUAL • INSPIRING
Tel.: +420 261 219 182
Fax: +420 261 219 192
Production plant in the Czech Republic:
K Silu 2179
393 01 Pelhřimov
Tel.: +420 565 300 300
Fax: +420 565 533 955
Sheet steel enclosure
conteg@conteg.com
www.conteg.com
Local Branches/Offices
Austria: +43 170 659 0115
Benelux: +32 477 957 126
Eastern Europe / Nordics:
+49 172 8484 346
France, Maghreb: +33 686 074 386
Germany / Switzerland: +49 170 523 4958
India:
+91 991 6950 773
Middle East: +971 4445 2838
Russia, CIS: +7 495 967 3840
Saudi Arabia: +966 594 30 13 08
Ukraine: +380 674 478 240
Stainless steel enclosure
Enclosure with glazed door
Although this catalog was prepared, produced and checked with the best care, Conteg, spol. s r.o. cannot accept any liability for omissions or errors in this publication. Due to the continuous development
and progress, Conteg, spol. s r.o. also reserves the right to change details and technical specifications of the products shown in this catalogue. Such changes along with eventual errors or printing errata shall
not constitute grounds for compensation.
Enclosure for outdoor application
www.conteg.com
www.conteg.com
inTEG Compact Enclosures
Dimensions mm
Height
Width
Enclosure type/material
Depth
Single-door enclosure
300
200
155
300
250
155
300
300
155
300
300
210
300
400
155
300
400
210
400
300
155
400
300
210
400
400
210
400
600
210
400
600
250
500
300
210
500
400
210
500
400
250
500
500
210
500
500
300
600
400
210
600
400
250
600
400
300
600
600
600
600
600
600
600
700
700
800
800
800
800
800
1000
1000
1000
1000
1000
1200
1200
1200
1200
500
600
600
600
600
800
800
500
500
600
600
600
800
800
600
600
600
800
800
600
600
800
800
250
210
250
300
400
250
300
210
300
250
300
400
300
400
250
300
400
300
400
300
400
300
400
600
800
800
1000
1000
1000
1000
1200
1200
1200
1200
1400
800
1000
1200
1000
1000
1200
1200
1000
1000
1200
1200
1000
300
300
300
300
400
300
400
300
400
300
400
300
Sheet steel
Glazed door
Outdoor
Stainless
steel 304
Stainless steel
316L
WME‑030215
WME‑032515
WME‑030315
WME‑030321
WME‑030415
WME‑030421
WME‑040315
WME‑040321
WME‑040421
WME‑040621
WME‑040625
WME‑050321
WME‑050421
WME‑050425
WME‑050521
WME‑050503
WME‑060421
WME‑060425
WME‑060403
WME‑G‑030215
WME‑G‑032515
WME‑G‑030315
WME‑G‑030321
WME‑G‑030415
WME‑G‑030421
WME‑G‑040315
WME‑G‑040321
WME‑G‑040421
WME‑G‑040621
WME‑G‑040625
WME‑G‑050321
WME‑G‑050421
WME‑G‑050425
WME‑G‑050521
WME‑G‑050503
WME‑G‑060421
WME‑G‑060425
WME‑G‑060403
WME‑O‑030215
–
WME‑O‑030315
WME‑O‑030321
WME‑O‑030415
WME‑O‑030421
WME‑O‑040315
WME‑O‑040321
WME‑O‑040421
WME‑O‑040621
–
–
WME‑O‑050421
–
WME‑O‑050521
WME‑O‑050503
WME‑O‑ 060421
–
WME‑O‑ 060403
WME‑X‑030215
–
WME‑X‑030315
WME‑X‑030321
WME‑X‑030415
WME‑X‑030421
WME‑X‑040315
WME‑X‑040321
WME‑X‑040421
WME‑X‑040621
–
–
WME‑X‑050421
–
WME‑X‑050521
WME‑X‑050503
WME‑X‑060421
–
–
WME‑XX‑030215
–
WME‑XX‑030315
WME‑XX‑030321
WME‑XX‑030415
WME‑XX‑030421
WME‑XX‑040315
WME‑XX‑040321
WME‑XX‑040421
WME‑XX‑040621
–
–
WME‑XX‑050421
–
WME‑XX‑050521
WME‑XX‑050503
WME‑XX‑060421
–
–
WME‑G‑060525
–
WME‑G‑060621 WME‑O‑ 060621
WME‑G‑060625
–
WME‑G‑060603 WME‑O‑ 060603
WME‑G‑060604 WME‑O‑ 060604
WME‑G‑060825
–
WME‑G‑060803 WME‑O‑060803
WME‑G‑070521
–
WME‑G‑070503 WME‑O‑ 070503
WME‑G‑080625 WME‑O‑ 080625
WME‑G‑080603 WME‑O‑ 080603
WME‑G‑080604
–
WME‑G‑080803 WME‑O‑ 080803
WME‑G‑080804
–
WME‑G‑100625
–
WME‑G‑100603 WME‑O‑ 100603
WME‑G‑100604 WME‑O‑ 100604
WME‑G‑100803
–
WME‑G‑100804 WME‑O‑ 100804
WME‑G‑120603 WME‑O‑ 120603
WME‑G‑120604
–
WME‑G‑120803
–
WME‑G‑120804 WME‑O‑ 120804
Double-door enclosure
WME‑160803 WME‑G‑160803
–
WME‑181003 WME‑G‑181003
–
WME‑181203 WME‑G‑181203
–
WME‑201003 WME‑G‑201003
–
WME‑201004 WME‑G‑201004
–
WME‑201203 WME‑G‑201203
–
WME‑201204 WME‑G‑201204
–
WME‑221003 WME‑G‑221003
–
WME‑221004 WME‑G‑221004
–
WME‑221203 WME‑G‑221203
–
WME‑221204 WME‑G‑221204
–
WME‑241003 WME‑G‑241003
–
–
WME‑X‑060621
WME‑X‑060625
WME‑X‑060603
–
–
WME‑X‑060803
–
WME‑X‑070503
WME‑X‑080625
WME‑X‑080603
–
WME‑X‑080803
–
–
–
–
WME‑X‑100803
–
–
–
WME‑X‑120803
WME‑X‑120804
–
WME‑XX‑060621
WME‑XX‑060625
WME‑XX‑060603
–
–
WME‑XX‑060803
–
WME‑XX‑070503
WME‑XX‑080625
WME‑XX‑080603
–
WME‑XX‑080803
–
–
–
–
WME‑XX‑100803
–
–
–
WME‑XX‑120803
WME‑XX‑120804
–
–
–
WME‑X‑201003
–
–
–
WME‑X‑221003
–
–
–
–
–
–
–
WME‑XX‑201003
–
–
–
WME‑XX‑221003
–
–
–
–
WME‑060525
WME‑060621
WME‑060625
WME‑060603
WME‑060604
WME‑060825
WME‑060803
WME‑070521
WME‑070503
WME‑080625
WME‑080603
WME‑080604
WME‑080803
WME‑080804
WME‑100625
WME‑100603
WME‑100604
WME‑100803
WME‑100804
WME‑120603
WME‑120604
WME‑120803
WME‑120804
Compact enclosures
Conteg, spol. s r.o.
Czech Republic Headquarters:
Na Vítězné pláni 1719/4
140 00 Prague 4
INDUSTRIAL • INNOVATIVE • INDIVIDUAL • INSPIRING
Tel.: +420 261 219 182
Fax: +420 261 219 192
Production plant in the Czech Republic:
K Silu 2179
393 01 Pelhřimov
Tel.: +420 565 300 300
Fax: +420 565 533 955
Sheet steel enclosure
conteg@conteg.com
www.conteg.com
Local Branches/Offices
Austria / Germany /Switzerland:
+420 724 723 184
Benelux:
+32 477 957 126
Eastern Europe:
+49 172 8484 346
Finland / Sweden / Baltics:
+358 50 414 1257
France / Italy / Maghreb: +33 686 074 386
India:
+91 991 6950 773
Middle East:
+971 4445 2838
Russia / CIS: +7 495 967 3840
Saudi Arabia:
+966 594 30 13 08
Ukraine:
+380 674 478 240
Stainless steel enclosure
Enclosure with glazed door
Although this catalog was prepared, produced and checked with the best care, Conteg, spol. s r.o. cannot accept any liability for omissions or errors in this publication. Due to the continuous development
and progress, Conteg, spol. s r.o. also reserves the right to change details and technical specifications of the products shown in this catalogue. Such changes along with eventual errors or printing errata shall
not constitute grounds for compensation.
Enclosure for outdoor application
www.conteg.com
www.conteg.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising