a designer-style, micro-touch, digital dimmer
Product
Specifications
ONSET® LOW-WATTAGE HDF FLUORESCENT ELECTRONIC DIMMER
A DESIGNER-STYLE,
MICRO-TOUCH, DIGITAL DIMMER
FOR USE WITH LIGHTOLIER® CONTROLS POWERSPEC™ HDF BALLAST
LOW-WATTAGE: 600VA
(FOR 1500VA USE ONSET “OH” SERIES.)
Project:
Location/Type:
Description
The Onset Low-Wattage Fluorescent Electronic Dimmer is a digital, micro-touch preset
dimmer, designed for use with Lightolier Controls PowerSpec HDF Dimming Ballast and
Lightolier Controls dimming amplifiers. The unit is equipped with an automatic fade and LED
readout, providing full-function, three-way and multi-location dimming control when used
with Onset Remotes. Onset Masters and Master Remotes have the ability to control up to four
Onset dimmers simultaneously, offering an economical way to create preset lighting scenes.
Features
• LED readouts, including:
- A soft green LED which indicates the current preset
- A bright green LED which indicates the current level
- A blinking red LED which indicates a fading off process
- A glowing red LED which indicates that the dimmer is off
• As an individual device, the Onset Low-Wattage Fluorescent Electronic Dimmer has the
capability to recall two presets—a user-selected “on” level and full brightness.
• Manual override—allows the lights to be adjusted to any level without affecting the preset
level(s), including full brightness.
• Automatic fade—gently turns the lights on and off, thereby preserving the unit’s lamp life.
• Power failure memory—a feature that returns the dimmer to the level of lighting the unit
held before the power failure occurred.
• Full-Function, Onset Remotes allow total dimming control from multiple location.
OS600HDF120
Compli faceplate sold separately.
Custom engraved faceplates available.
Onset Operation
• Set a preset from the off position:
- Press and hold down the rocker top located on the device.
- Release the rocker top at the desired level.
- Press the button labeled “Set” which is located on the right side of the device’s frame.
• Turn a group of lights on to the preset:
- Tap the rocker top once.
• Turn a group of lights on to full power:
- Tap the rocker top twice.
• Adjust the lighting level:
- Hold down the top or bottom of the rocker.
- When the desired lighting level is reached, release.
• Turn the lights off:
- Tap the rocker bottom once or twice until the lights fade off.
Made in U.S.A.
Description Model Number
Onset 600VA
Dimmer
OS600HDF120
Color Suffix
W I AL GR BL BR
W=White, I=Ivory, AL=Almond, GR=Grey, BL=Black, BR=Brown
For technical/sales assistance, call: 1-800-526-2731
www.lolcontrols.com P/N 87-0149A
Product
Specifications
ONSET® LOW-WATTAGE HDF FLUORESCENT ELECTRONIC DIMMER
Specifications
Dimensions
0.37"
1.68"
The Onset Low-Wattage Fluorescent Electronic Dimmer is UL Listed to U.S. and Canadian safety
standards for 120VAC, 60Hz, 600VA operations to control fluorescent lighting loads with
approved Lightolier® Controls PowerSpec HDF Electronic Ballast and Lightolier Controls dimming amplifiers. Device operations include:
• Fade to preset
• Fade to full brightness
• Fade to off
The unit has the capability of storing two presets in its memory—a user-selected preset and
full brightness. Through the use of an Onset Master controller, it is possible to control up
to four devices simultaneously, and to recall two preset scenes. This dimmer also allows
manual override of any preset level, without affecting the level set into memory.
The Onset Low-Wattage Fluorescent Electronic Dimmer has LEDs that indicate the preset
lighting level, the user preset and the off status. Following a power interruption, the Onset
Low-Wattage Fluorescent Electronic Dimmer returns to the lighting level it maintained
before the interruption. It also accepts full-function commands from an unlimited number
of multi-location Onset Remotes.
The unit’s toroidal filter is used to suppress RFI and EMI. Its air gap is used to open the
circuit completely. However, the air gap is unobtrusive and is not required for normal
operations.
This device mounts in a single-gang wall box and can be combined with a designer-style
faceplate, as well as Compli® Screwless Faceplates which come in the colors of white, ivory,
almond, grey, black, or brown. (sold separately)
1.37"
3.25"
4.0"
OS600HDF120
Wiring Diagram
Single Pole
Tan
Black
Tan
Black
White
HDF Ballast
White
Tan
Red
Yellow
Yellow
White
Grey
Black
GND
L
Yellow
Tan
Black
HDF Ballast
HDF Ballast
White
Red
Yellow
Yellow(4)
D
GND
Master/Master Remote
3-Way/Multi-Location
N
R
Grey
Black GND
R
Black
D
GND
Locate Dimmer on load side
White
Red
Blue
Black
L
M
R
N
GND
M
D
D
D
D
Brown
Black
GND
L
Key: D=Dimmer, R=Remote, M=Master, MR=Master Remote
N
Note: When using the OSM 4 Onset Master,
all dimmers must be on the same phase.
LISTED
This product may be covered by one or more of the following U.S. Patents: #4,413,211; 4,430,576; 4,465,956; 4,733,138; 4,792,731; 4,880,950; 4,988,840; 4,992,709; 5.004,969;
5,128,654; 5,153,816; 5,189,259; 5,194,858; 5,239,255; 5,371,439; 5,371,444; 5,636,111; 5,642,104; 5,646,490; Des. 307,578; Des. 333,124; License 4,482,844 and corresponding foreign patents. Other Utility, Design and Foreign Patents Pending.
We reserve the right to change details of design, materials and finish in any way that will not alter the installed appearance or reduce function performance.
Lightolier® Controls
A Genlyte Company
10911 Petal Street • Dallas, Texas 75238
For technical/sales assistance, call: 1-800-526-2731
Made in U.S.A. ©Lightolier® Controls 2005
www.lolcontrols.com P/N 87-0149A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising