PI - network Crystal Measurement System

PI - network Crystal Measurement System
KH1800 / KH1820
PI - network Crystal Measurement System
Supports Physical
Load Capacitor
Universal SMD
Adapter Kit



















Tuning Folk
Test Fixture
High Accuracy IEC60444-5 & IEC60444-6 PI-Network Measurement.
Supports "Direct Impedance Measurement" and "Physical Load Capacitance" methods for FL measurement.
Full Network Analyser Configuration with built-in Frequency synthesizer and Vector-voltmeter.
Supports two types of user interface for production mode and engineering mode Production
Ultra high speed spurious scan & drive level dependence (DLD) measurement.
High speed PASS/FAIL measurement and sorting up to 5 bins (sorting results displayed on screen).
All sorting limits of each bin are individually programmable by operator.
Flexible data storage (Supports data storage in Excel worksheet format) and printing features.
Support multilingual: simplified Chinese, traditional Chinese and English.
Optional Test Fixture for Tuning Fork Crystal, SMD crystal etc
Optional connectivity with third party automatic machines: Hardware I/O control mode or software remote
control mode are available for interfacing the KH1800 with any automatic machines.
External time base interface.
Frequency Range : KH1800 : 1-120MHz
KH1820 : 20KHz – 400KHz, 500KHz – 240MHz
Drive Level : 1nW - 1mW into 25 Ohm.
Measurement capabilities (more than 48 parameters): Fr, Fs, FL, Rr, Rs, RL, CL, C0, C1, L1, Q, Ts, C0/C1,
DF1, DF2, FL1, FL2, DLD-F, DLD-R, DLD- (gamma : IEC444-6 standard), spurious scan.
Repeatability
: Fs 
 Time base error 1 ppm.
FL 
 Time base error 1 ppm  (0.2pF  Ts of crystal).
Rs 
 8% 1.
Time Base error
: ex-factory calibration
 1 ppm
aging for 1st year
 2 ppm
aging for 2nd year and thereafter
 1 ppm
Calibration Method : 3 terms (open, short and load) calibration with standard resistor (provided with
system).
Requirements on personal computer supplied by user:
For optimum performance, the following configuration is recommended: Intel Core 2 Duo E4500 2.2GHz with 1G RAM , USB, PCI
slot , , PCI bus (for full size card) with +3.3V and +5V power is essential, Microsoft Windows XP /Windows 7/ Win10 (32/64 Bits)
Kolinker Industrial Equipments Limited
Unit C, 24/F, Shield Industrial Centre, 84 - 92 Chai Wan Kok Street, Tsuen Wan, New Territories, Hong Kong.
Phone : (852) 3511 2388
Fax
: (852) 3511 2300
E-mail
: kolinker@kolinker.com
Home page : http://www.kolinker.com
1288E00-1094 R03
GRAPHICAL DISPLAY FORMAT
Engineering Mode
Production mode
Spurious Response Scanning
Drive Level Dependence
(DLD)
Specifications are subject to change without prior notice.
Photo shown is for reference only.
Windows is a registered trademark of Microsoft Corp.
Kolinker Industrial Equipments Limited
Unit C, 24/F, Shield Industrial Centre, 84 - 92 Chai Wan Kok Street, Tsuen Wan, New Territories, Hong Kong.
Phone : (852) 3511 2388
Fax
: (852) 3511 2300
E-mail
: kolinker@kolinker.com
Home page : http://www.kolinker.com
1288E00-1094 R03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising