Spraymec MF 050 VC
Spraymec MF 050 VC
Technical data sheet
100068557
07.10.2014
Pictured machine may include options and additional equipment.
Features
Spraymec MF 050 VC is an electrohydraulic self-propelled mobile concrete sprayer for modern mining
operations in small and medium size tunnels. It can be operated either with electric hydraulic power-pack
or with diesel engine. It features a new Normet NSP 30 concrete spraying pump with maximum theoretical concrete output of 27 m3/h with electric operation.
Three different accelerator dosing system and concrete pumping control system configurations give possibilities to choose best feature for purpose in question.
Basic version is Nordoser XH with mono –style dosing pump and with manual adjustment for dosing and
for concrete pumping output volume. Optional dosing system Nordoser XE comes with mono –style pump
with electronically adjusted concrete output volume control and accelerator dosing is synchronized automatically with concrete output volume. High-end model Nordoser XI includes low-pulsation concrete
pumping feature and electronically adjusted concrete output volume control together with synchronized
accelerator dosing.
All Nordoser models are available with optional low-pulsation Normet peristaltic dosing pump Normet
LPP-D and additional process information display in cabin.
New improved cabin has more space for operator and ergonomic drivers place. New dashboard with new
LCD multi information display (MID) replaces previous separate gauges.
Improved spraying boom SB 500 B includes strengthened steel structure, modified joints and has larger
diameter hydraulic cylinders to give more power for smooth spraying operations.
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
1/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Technical data sheet
100068557
07.10.2014
Spraymec MF 050 VC
Technical specification
SPRAYBOOM SB 500 B
•
•
•
•
•
•
Boom rotation
Boom lifting Boom folding Extension Nozzle rotation Nozzle tilting TRANSMISSION
270º
-20º...+75º
-60º...+165º
2200 mm
420º
105º
Dana 24 000 series power shift with pump drive group
3 speeds forward and reverse
4-wheel drive
AXLES
Planetary type
Dana 123
Load end axle fixed
Engine end axle oscillation
CONCRETE PUMP
Spraypump NSP 30
Low-wear and low-maintenance double piston pump:
•
Pumping capacity theoretical with electro-hydraulic
4 - 27 m3 / h
•
Pumping cylinder diameter
200 mm
•
Cylinder stroke 600 mm
•
Pumping pressure max. 51 bar
•
Hydraulic pressure max. 250 bar
TYRES
12.00 - 20 PR 20
PERFORMANCE
1st gear 2nd gear 3rd gear Max. tractive effort Max speed in upward 1:7 inclined tunnel Performance curve High pumping pressure enables the conveying of stiff
concrete
The pump is able to pump up to max. aggregate size of 16
mm (including crushed) and all types of fibres (max. length 60
mm) in the mix
Service brake: hydraulically powered two-circuit oil
immersed multidisc brakes in both axles
Safety/Parking brake: spring applied hydraulically released
fail-safe -type brake. Brake test possibility in cabin
Nordoser XH
Hydraulically driven accelerator mono pump
Max pumping pressure 12 bar
Dozing rate 0.6...16 L/min (36 - 960 L/h)
Manual dosing control , flow L/min and dosing % readable on
the display
Manual concrete output control, readable on the display
Hydraulic pilot control system for concrete pump
Accelerator tank 500 L
STEERING
Hydraulic frame steering
Orbitrol type
Frame articulation
+/- 40°
FUEL TANK
COMPRESSOR
Capacity Electric driven screw type compressor
• 10 m3/min / 7 bar FAD
• 55 kW electric motor
240 L
HYDRAULIC SYSTEM
Carrier hydraulics:
Variable displacement pump system for carrier and SB 500
B, pump unloaded at start
Pressure setting 210 bar, 130 L/min/2200 rpm
Indication of level, filtration and temperature
Hydraulic oil tank capacity 400 L
Return oil filtration 10 μm
REMOTE CONTROL
10 m cable control with 2 joy sticks as a standard when open
cabin
CONCRETE LINE
For spraying functions:
Electro hydraulic power pack 55 kW/ 50/60Hz /1500RPM
Variable displacement piston pump systems
unloaded at start:
•
140 L / min for concrete pump (piston type)
•
110 L / min for boom (piston type)
•
24 L / min for agitator and dosing system (gear type)
65 mm
WATER HOSE REEL
Manual, 3/4" hose max. 6 km/h
12 km/h
25 km/h
133 kN
9 km/h
100018584
BRAKES
ACCELERATOR SYSTEM
Left hand side assembly
Concrete line diameter +/- 10°
30 m
ENGINE
Liquid cooled turbo charged Deutz TCD 2013 L04 2V, 120
kW/2200 rpm, TIER 3 approved
EXHAUST SYSTEM
Catalytic exhaust gas purifier and muffler
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
2/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Technical data sheet
100068557
07.10.2014
Spraymec MF 050 VC
Technical specification
24 VDC ELECTRICAL SYSTEM
OTHER
CAN Bus controlled spraying process control system with
fault diagnostics
Carrier electric functions NGE2
Exposed components are min IP 65 standard
Battery 2 x 115 Ah
Alternator 100 A
LED driving lights
•
Front (4 pcs) 18 W
•
Back (2 pcs) 18 W
•
Side reversing (2 pcs) 43 W
LED working lights
•
On cabin (4 pcs) 43 W
•
On boom (2 pcs) 43 W
•
On load end (2 pcs) 18 W
LED parking, brake and indicator lights
LED side lights; amber
Rotating beacon; amber
Wire harness (self extinguishing) with tinned wires and
water tight conduits
Hydraulically driven high pressure washer 180 bar / 30 L
12 kg hand-held fire extinguisher
Standard symbol labels
Basic tool set:
• Cleaning plug
• Washing ball
• Hitting tool for nozzle
• Claw coupling
• Hose clamp
• Rubber hose 3/4" 4 m
• Carabiner
• Wrench for spraymec nozzles
• Sledgehammer 800g
• Nozzle tip d45mm plasttic
• Nozzle tip d45 boron steel
• cone for concrete piston assembly
• special bolt for concrete piston assembly
3 pcs manuals in one language
3 pcs spare part books (English only)
HIGH VOLTAGE ELECTRICAL SYSTEM
400 V / 50 Hz , 3 x 70 mm2 + 3 x 16 mm2
Cable lenght 100 m
CABLE REEL
Power supply of the electric functions
Max cable diameter/lenght 3 x 95 mm2 + ground / 100 m
Hydraulically driven
Cable in/out reeling function from the cabin and near the the
reel
DRIVER'S COMPARTMENT
Open 1-man cabin FOPS/ROPS approved
Suspended driver’s seat
Seat with retractable lap seat belt
The driver’s compartment with driving controls and two sets
of pedals
3 different mounting heights
MID 070 S Multifunctional Display with:
•
Meters; e.g. speed, RPM, operating hours
•
Status indicators; e.g. fluid levels, temperatures,
pressures, alarms, faults
GREASING SYSTEM
Centralized grease fittings for the carrier
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
3/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Technical data sheet
100068557
07.10.2014
Spraymec MF 050 VC
Optional equipment
ACCELERATOR SYSTEM
DRIVER'S CABIN
Nordoser XE:
Hydraulically driven mono-style dosing pump with electric
control
Max pumping pressure 12 bar
Dozing rate 0.6...16 L/min (36 - 960 L/h)
Accelerator flow fully synchronized with the concrete output
Dosing % adjustable from the remote control unit and from
the cabin
Hydraulic pilot control system for concrete pump
Conrete output adjustable from the remote control unit and
from the cabin
Enclosed cabin, FOPS/ROPS
Spraying process controls and boom controls
ENGINE
Liquid cooled turbo charged MB OM 904 LA, 110 kW/2200
rpm, TIER 3 approved:
1st gear max. 6 km/h
2nd gear 13 km/h
3rd gear 25 km/h
Max. tractive effort 120 kN
Max speed in upward 1:7 inclined tunnel 7 km/h
Performance curve 100006272
Nordoser XI:
Hydraulically driven mono-style dosing pump with electric
control
Max pumping pressure 12 bar
Dozing rate 0.6...16 L/min (36 - 960 L/h)
Accelerator flow fully synchronized with the concrete output
Dosing % adjustable from the remote control unit and from
the cabin
Electrical control system for concrete pump with low
pulsation pumping feature
Conrete output adjustable from the remote control unit and
from the cabin
Normet LPP-D Peristaltic accelerator pump
Accelerator tank
EXHAUST SYSTEM
Particle filter for Deutz TCD 2013 120 kW
OTHER
Hydraulically operated water reel:
•
Hose length max 120 m
•
Hose size max 1 1/2”
Must be used with the wall washing system
850 L
CONCRETE LINE
Right hand side assembly
Concrete line diameter 50 mm
HIGH VOLTAGE ELECTRICAL SYSTEM
690 V / 50 Hz. Cable type 3 x 50 mm2 + 3 x 10 mm2
Cable lenght 130 m
1000 V / 50 Hz. Cable type 3 x 35 mm2 + 3 x 6 mm2
Cable lenght 150 m
With 1000 V and 690 V electrics it is possible to use longer
cable lenght than 130 m and 150 m. In these cases cable lenght
and size must be checked case by case
440 V, 60 Hz. Cable type 3 x 70 mm2 + 3 x 16 mm2
Cable lenght 100 m
440 V, 60 Hz with 12 m3 compressor. Cable type 3 x 95 mm2
+ 3 x 16 mm2
Cable lenght 100 m
COMPRESSOR
Electric driven screw type compressor
• 12 m3/min / 7 bar FAD
• 75 kW electric motor
Requires cable type 3 x 95 mm2 + 3 x 16 mm2
Soft start with 400 V / 440 V
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
4/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Technical data sheet
100068557
07.10.2014
Spraymec MF 050 VC
Additional equipment
Warning lights, 1 unit:
• Rotating beacon; red
• Rotating beacon; blue
CD/Radio system
Cabin ventilation:
• Cabin heating
• Air conditioning
REMOTE CONTROL
FIRE SUPPRESSION SYSTEM
Radio control with cable support
Fogmaker: Manually actuated
Fogmaker: Automatically actuated
Ansul: Manually actuated
Ansul: Automatically actuated
HIGH VOLTAGE ELECTRICS
Soft start system for compressor:
• 690 V / 50 Hz
GREASING SYSTEM
CONCRETE PUMP
Automatic greasing system (Lincoln) for the
concrete pump
Automatic greasing system (Lincoln) for the carrier and
spray boom
Diesel operated concrete pumping with required hydraulics
•
Pumping capacity theoretical with diesel
4 - 19 m3 / h
NOTE: Spraying requires external air supply
Variable displacement pump system for concrete pump,
pump unloaded at start
Pressure setting 250 bar, 135 L/min/2200 rpm
Gear pump system for agitator and Nordoser
Pressure relief valve setting 250 bar, 24 L/min/2200 rpm
Common hydraulic tank for all functions
Capacity 400 L
Return oil filtration 10 μm
OTHER
Fast fuel filling system: Wiggins
Oil evacuation kit with sample points
Extra hand held fire extinguisher (12 kg)
Hydraulic front support legs
Warning lights, 1 unit:
• Rotating beacon; amber
• Rotating beacon; red
• Rotating beacon; blue
• Strobe light; white
ACCELERATOR SYSTEM
Extra display for Nordoser in cabin
Text labels in: Fin / En / Por / Swe / Rus / Nor / Ger / Fra /
Spa / Ita
Tools for maintenance
2 wheel chocks with brackets
Spare wheel with tyre
FORM OIL SYSTEM
Electric driven pump with hose reel:
•
Tank capacity •
Hose lengh •
Working pressure
30 L
20 m
7 bar
FOR MACHINE AND WALL WASHING
Rock wall washing system 180 bar / 90 L, hydraulic motor
driven:
Can only be used when power pack is connected to the electrical mains
When using this equipment, the vehicle washing is also carried out by this washer. The washing power will
automatically adjust to the correct level.
Hydraulically driven water reel must be selected
Wall washing system 180 bar / 90 L/min, piston to piston
type hydraulic pump
Wall washing system 460 bar / 50 L/min
SUSPENSION
Front axle suspension system
• Hydraulic front support legs
FOR ENCLOSED CABIN
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
5/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Spraymec MF 050 VC
Technical data sheet
100068557
07.10.2014
LTC services
SPARE PARTS
Spare parts package A: Available for 1000 h of use*. Include
periodical service, most common wearing parts and most
critical safety parts.
Spare parts package B: Available for 3000 h of use*. Include
periodical service, most common wearing parts and most
critical safety parts.
* Recommendations are based on average hours - can vary a
lot depending on work site conditions.
TRAINING SERVICES
Available before delivery, at start up and after delivery.
NOTE! after/during Start up / Commissioning as
additional training days these are cheaper.
In general training reduces operation costs.
Product training:
Operation and Maintenance
NorSmart
Foundation of electrics, hydraulics
and mechanics
Audit
Process training:
Concrete spraying
Charging
Scaling
Process audit
AUDIT SERVICES
To improve machines performance
To improve your processes performance and quality
SERVICE CONTRACTS
Spare parts supply programmes
Scheduled inspection programmes
Supervision programmes
Periodic maintenance programmes
Machine usage programmes
LINK ONE
Link One electronic spare part manuals
WARRANTY SERVICES
Extended warranty
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
6/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Technical data sheet
100068557
07.10.2014
Spraymec MF 050 VC
Dimensions
SIDE VIEW
Machine with enclosed cabin
SIDE VIEW
DIMENSIONS
Length Width as shown
Height
Wheel base
Track
Ground clearance as shown
TURNING RADIUS
11 700 mm
2000 mm
2550 (2600) mm
3650 mm
1650 mm
320 mm
Outer Inner 6800 mm
3900 mm
WEIGHT
Operating 18 000 kg
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
7/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Spraymec MF 050 VC
Technical data sheet
100068557
07.10.2014
Dimensions
TURNING RADIUS
SB500 B BOOM MOVEMENTS AND REACH AREA
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
8/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Technical data sheet
100068557
07.10.2014
Spraymec MF 050 VC
Dimensions
MINIMUM SPRAYING AREA
MAXIMUM SPRAYING AREA
OPTIMAL SPRAYING AREA
SPOT SPRAYING REACH
SPRAYING AREAS
Spraying area from one stand with:
• maximum tunnel size
• minimum tunnel size
• optimized tunnel size
33 m2
19,3 m2
32,8 m2
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
9/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Spraymec MF 050 VC
Technical data sheet
100068557
07.10.2014
Tractive efforts
DEUTZ TCD 2013 L4 120 kW
Performance curve 100018584
MERCEDES-BENZ OM 904 LA 110 kW
Performance curve 100006272
Normet reserves the right to change this specification without further notice.
Normet Oy
Ahmolantie 6
FI-74510 IISALMI, FINLAND
10/10
Tel +358 (0) 17 83 241
Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising