Все оригинальные аксессуары к вашей технике на одной

Все оригинальные аксессуары к вашей технике на одной
Все оригинальные аксессуары к вашей технике
на одной странице
TA970XE Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
1.3
1.4
1.5
Before You Start ................................................................................ 1
Package Checklist ............................................................................. 1
Motherboard Features...................................................................... 2
Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ....................................... 5
FAN Headers ...................................................................................... 7
Installing System Memory ................................................................ 8
Connectors and Slots ....................................................................... 10
3.1
3.2
How to Setup Jumpers .................................................................... 13
Detail Settings .................................................................................. 13
4.1
4.2
4.3
Operating System............................................................................ 19
Raid Arrays ...................................................................................... 19
How RAID Works ............................................................................. 19
5.1
5.2
T-Series BIOS..................................................................................... 23
T-Series Software ............................................................................. 23
6.1
6.2
6.3
6.4
6.5
Driver Installation Note.................................................................. 36
Extra Information............................................................................ 37
AMI BIOS Beep Code ....................................................................... 38
AMI BIOS Post Code ........................................................................ 39
Troubleshooting ............................................................................... 41
Chapter 2: Hardware Installation .......................... 5
Chapter 3: Headers & Jumpers Setup .................. 13
Chapter 4: RAID Functions .................................. 19
Chapter 5: T-Series BIOS & Software................... 23
Chapter 6: Useful Help ........................................ 36
Appendix: SPEC In Other Languages ................... 42
German .................................................................................................................. 42
French .................................................................................................................... 44
Italian..................................................................................................................... 46
Spanish ................................................................................................................... 48
Portuguese ............................................................................................................ 50
Polish ...................................................................................................................... 52
Russian ................................................................................................................... 54
Arabic..................................................................................................................... 56
Japanese ................................................................................................................ 58
TA970XE
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
„
„
„
„
„
„
1.2
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
PACKAGE CHECKLIST
Serial ATA Cable X 4
Rear I/O Panel for ATX Case X 1
User’s Manual X 1
Fully Setup Driver CD X 1
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
SPEC
CPU
FSB
Chipset
Super I/O
Socket AM3+
AMD 64 Architecture enables 32 and 64 bit
AMD Sempron / Phenom II / Athlon II / FX
computing
processors
Supports Hyper Transport 3.0
Support HyperTransport 3.0
Supports up to 5.2 GT/s Bandwidth
AMD 970
AMD SB950
ITE 8728
Environment Control initiatives
Provides the most commonly used legacy
H/W Monitor
Super I/O functionality
Fan Speed Controller
Low Pin Count Interface
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 4
Main
Memory
Dual Channel Mode DDR3 memory module
Max Memory Capacity 32GB
Supports DDR3 800/1066/1333/1600/1866
Each DIMM supports 512MB/
Supports DDR3 2000 (OC)
1GB/2GB/4GB/8GB DDR3
Data transfer rates up to 6 Gb/s.
SATA III
Integrated Serial ATA Controller
SATA Version 3.0 specification compliant.
RAID 0,1,5,10 support
Realtek RTL 8111E
Sound
ALC892
USB3.0
Asmedia ASM1042
Data transfer rates up to 600 MB/s
IEEE 1394
VIA VT6315N
1394a
Slots
On Board
Connectors
2
10 / 100 Mb/s / 1Gb/s auto negotiation
LAN
Half / Full duplex capability
7.1channels audio out
Supports HD Audio
PCI Slot
x2
Supports PCI expansion cards
PCI Express Gen2 x1 Slot
x2
Supports PCI-E Gen2 x1 expansion card
PCI Express Gen2 x16 Slot
x2
Supports PCI-E Gen2 x16, x4 expansion cards
SATA Connector
x5
Each connector supports 1 SATA device
Front Panel Connector
x1
Supports front panel facilities
Front Audio Connector
x1
Supports front panel audio function
S/PDIF out Connector
x1
Supports digital audio out function
Consumer IR Connector
x1
Supports infrared function
CPU Fan Header
x1
CPU Fan power supply (with Smart Fan function)
System Fan Header
x2
System Fan Power supply
CMOS clear Header
x1
Restore CMOS data to factory default
USB2.0 Connector
x2
Each connector supports 2 front panel USB2.0 ports
TA970XE
SPEC
Back Panel
I/O
IEEE 1394 Connector
x1
Connects to IEEE 1394 device
Printer Port Connector
x1
Each connector supports 1 Printer port
Serial Port Connector
x1
Connects to RS-232 Port
Power Connector (24-Pin)
x1
Connects to Power supply
Power Connector (4-Pin)
x1
Connects to Power supply
PS/2 Keyboard / Mouse
x1
Connects to PS/2 Keyboard/Mouse
Optical +coaxial S/PDIF Out
x1
Provides digital audio out function
1394 Port
x1
Connects to IEEE 1394 device
eSATA Port
x1
Connect to SATA devices
LAN port
x1
Connect to RJ-45 ethernet cable
USB2.0 Port
x6
Connect to USB2.0 devices
USB3.0 Port
x2
Connect to USB3.0 devices (by Asmedia ASM1042)
and USB2.0/USB1.X devices (by SB950)
Audio Jack
Board Size
x6
305 mm (W) x 225 mm (L)
ATX
Biostar reserves the right to add or remove support
OS Support Windows XP / Vista / 7
1.4
Provide Audio-In/Out and Mic. connection
for any OS With or without notice.
REAR PANEL CONNECTORS
PS/2
Port
USB2.0X 2
Optical +coaxial
S/PDIF Out
USB2.0X2
USB2.0X2
Center
IEEE 1394
eSATA
LAN
USB3.0X2
Line In
Rear
Line Out
Side
Mic In
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT
USB_
KBMS1
CPU_FAN 1
SPDIF1
DDR3_ B2
DDR3_B1
USB_1394_
ESATA1
DDR3_A2
So cke t AM3
U SB1
DDR3_A1
ATXPWR2
ATXPWR1
RJ45USB1
SYS_FAN1
AUDIO1
PEX1_1
SATA4
SATA5
AMD
970
LAN
PEX16_1
PEX1_2
AMD
SB950
Codec
JCMOS1
PEX16_2
SW_PWR1
SW_RST1
LED_D2
LED_D1
PCI1
Super
I/O
BAT1
BIOS
SYS_FAN2
PCI2
F_AUDIO1
J_PRINT1
F_1394A1
J_C OM1
CIR1
JSPDIFOU T1
Note: ■ represents the 1st pin.
4
F_USB1
F_USB2
SATA1
SATA3
PANEL1
SATA2
TA970XE
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
5
Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.
6
TA970XE
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)
SYS_FAN1: NorthBridge Fan Header
SYS_FAN2: System Fan Header
3
1
SYS_FAN1
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM
rate sense
3
1
SYS_FAN2
Note:
CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
7
Motherboard Manual
2.3
INSTALLING SYSTEM MEMORY
1.
8
DDR 3_B2
DDR 3_B1
DDR 3_A2
DDR 3_A1
A. DDR3 Modules
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
TA970XE
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Note:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out
and try again.
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB/8GB
DDR3_A2
512MB/1GB/2GB/4GB/8GB
DDR3_B1
512MB/1GB/2GB/4GB/8GB
DDR3_B2
512MB/1GB/2GB/4GB/8GB
Total Memory
Size
Max is 32GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
Enabled
X
O
X
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
Note:
Memory module must be installed in DDR3-A2 or DDR3-B2 to boot the
system.
9
Motherboard Manual
2.4
CONNECTORS AND SLOTS
SATA1~SATA5: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 5 channels SATA interface,
it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.
Pin
1
2
3
4
5
6
7
7
4
SATA5 SATA4
1
SATA1 SATA3
SATA2
7
4
1
ATXPWR2: ATX Power Source Connector
This connector provides +12V to CPU power circuit.
4
1
10
3
Pin
2
1
2
3
4
5
6
7
8
Assignment
+12V
+12V
+12V
+12V
Ground
Ground
Ground
Ground
Assignment
Ground
TX+
TXGround
RXRX+
Ground
TA970XE
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
1
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
Note:
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2
connectors have been plugged-in.
PCI1/PCI2: Peripheral Component Interconnect Slots
PCI stands for Peripheral Component Interconnect, and it is a bus standard for
expansion cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
11
Motherboard Manual
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
PEX16_2: PCI-Express Gen2 x4 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 2GB/s per direction;4GB/s in total.
PCI-Express Gen2 supports a raw bit-rate of 2.5Gb/s on the data pins.
PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
PEX1_1
PEX16_1
PEX1_2
PEX16_2
12
TA970XE
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
PWR_LED
On/Off
++ -
9
1
16
8
+ -
SPK
RST
HLED
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
13
Motherboard Manual
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
3
1
Pin 1-2 Close:
Normal Operation
(default).
3
3
1
1
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Load Optimal Defaults and save settings in CMOS.
J_COM1: Serial port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
14
2
10
1
9
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
TA970XE
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
1
Assignment
+5V
SPDIF_OUT
Ground
3
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
2 6
Pin
1
2
3
4
5
6
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
1 5
15
Motherboard Manual
F_1394A1: IEEE 1394 Header
This header allows user to connect IEEE 1394 device.
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
TPA1+
TPA1GND
GND
TPB1+
TPB1VCC
VCC
N/A
KEY
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.
2
26
1
16
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Assignment
25
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Pin
14
15
16
17
18
19
20
21
22
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
Ground
Data 4
Ground
Data 5
23
24
25
26
PE
Ground
SCLT
Key
TA970XE
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
These headers allow user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
F_ USB1
F_USB2
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
On-Board Buttons
There are 2 on-board buttons.
SW_PWR1
SW_RST1
SW_RST1: Reset button.
SW_PWR1: Power Switch button.
17
Motherboard Manual
On-Board LED Indicators
There are 2 LED indicators showing system status.
LED_D2
LED_D1
LED_D1 & LED_D2: Debug Indicators
18
TA970XE
CHAPTER 4: RAID FUNCTIONS
4.1
OPERATING SYSTEM
Supports Windows Vista and Windows 7.
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
4.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
19
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
20
Block 1
Block 2
Block 3
TA970XE
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
21
Motherboard Manual
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
22
TA970XE
CHAPTER 5: T-SERIES BIOS & SOFTWARE
5.1
T-SERIES BIOS
T-Series UEFI BIOS Features
Overclocking Navigator Engine (O.N.E.)
Self Recovery System (S.R.S)
Smart Fan Function
BIO-Flasher: Update UEFI BIOS file from USB Flash Drive
!! WARNING !!
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below
in this manual is for your reference only and the actual UEFI BIOS
information and settings on board may be different from this
manual. For further information of setting up the UEFI BIOS,
please refer to the UEFI BIOS Manual in the Setup CD.
A. Overclocking Navigator Engine (O.N.E.)
O.N.E provides several systems allowing users to customize personal
overclock settings, such as Manual Voltage System, Manual Memory
System, Manual MCT System, and Manual G.P.U System, etc.
Notice:
Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
23
Motherboard Manual
NOTE
Overclock is an optional process, but not a “must-do” process; it is not
recommended for inexperienced users. Therefore, we will not be responsible
for any hardware damage which may be caused by overclocking. We also
would not guarantee any overclocking performance.
B. Self Recovery System (S.R.S.)
This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.
C. Smart Fan Function
Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
↓
24
TA970XE
CPU Smart FAN
This item allows you to control the CPU Smart Fan function.
CPU FAN Calibrate
Press [ENTER] to calibrate CPU FAN.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~127, with an interval of 1.
Fan Ctrl On(℃)
When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~127, with an interval of 1.
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value. The range is from 0~127, with
an interval of 1.
Fan Ctrl Sensitive
The bigger the numeral is, the higher the FAN speed is. The range is from
0~127, with an interval of 1.
25
Motherboard Manual
5.2
T-SERIES SOFTWARE
Installing T-Series Software
1. Insert the Setup CD to the optical drive. The drivers installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching T-Series Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status.This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The illustration below is for reference only)
26
TA970XE
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.
The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you:
27
Motherboard Manual
Six Pre-set Modes: V3, V6, V9, V12, V15, AUTO for different overclocking
experience.
The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.
28
TA970XE
Pressing TOVERCLOCKER logo
will display information about
manufacturer and software version.
You can update currnet version by
clicking the button “Live Update.”
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode
Display manufacturer &
software version information
Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto P hase Mode
Reset Time &
Consumption
Display CPU
information
29
Motherboard Manual
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note: Even if the modes saving more power consumption are chosen, the
system still can keep excellent performance.
30
„
Auto Phase Mode
System switches the mode automatically according to current system
loading condition.
„
Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.
„
Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.
„
Medium Mode
This is the standard system power saving mode.
„
Maxi-Energy Mode
This is the best system performance mode.
TA970XE
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represent s import ant
*information
that you
must provide. Without
this informat ion, you may
not be able to send out
the mail.
This block will show
the information which
would be collect ed in
the mail.
condition
* Describe
of your system.
your area or
* Select
the area close to you.
Provide the e-mail
address that you would
like to send t he copy to.
the name of
* Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
31
Motherboard Manual
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.
We will not share customer’s data with any other third parties,
so please feel free to provide your system information while using
eHot-Line service.
If you are not using Outlook Express as your default e-mail client
application, you may need to save the system information to a .txt file
and send the file to our tech support with other e-mail application.
Go to the following web
http://www.biostar.com.tw/app/en-us/about/contact.php for getting
our contact information.
32
TA970XE
BIOS Update
BIOS Update is a convenient utility which allows you to update your
motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
AMI BIOS
Online Update function
Clear CMOS function
(Only for AMI BIOS)
(Only for AWARD BIOS)
Save current BIOS
to a .bin file
Update BIOS
with a BIOS file
<Backup BIOS>
Once click on this button, the saving
dialog will show. Choose the
position to save file and enter file
name. (We recommend that the file
name should be English/number
and no longer than 7 characters.)
Then click Save.
33
Motherboard Manual
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
34
TA970XE
<Online Update> (for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure
that the computer is connected to the internet before using this function.
After clicking on the Onlinr Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programing procedure may take minutes, please do not make any operation
during the programing process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this manual.
35
Motherboard Manual
CHAPTER 6: USEFUL HELP
6.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
36
TA970XE
6.2
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
37
Motherboard Manual
6.3
AMI BIOS BEEP CODE
Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13
Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match
image present in flash device)
POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8
Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)
Troubleshooting POST BIOS Beep Codes
Number of Beeps
1, 3
6, 7
8
38
Troubleshooting Action
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the
motherboard beyond all hope, eliminate the possibility of
interference by a malfunctioning add-in card. Remove all
expansion cards except the video adapter.
z If beep codes are generated when all other expansion
cards are absent, consult your system manufacturer’s
technical support.
z If beep codes are not generated when all other expansion
cards are absent, one of the add-in cards is causing the
malfunction. Insert the cards back into the system one at a
time until the problem happens again. This will reveal the
malfunctioning card.
If the system video adapter is an add-in card, replace or
reseat the
video adapter. If the video adapter is an integrated part of the
system board, the board may be faulty.
TA970XE
6.4
AMI BIOS POST CODE
Checkpoint
03
04
05
06
07
08
C0
C1
C2
C5
C6
C7
0A
0B
0C
0E
13
20
24
2A
2C
2E
31
33
Description
Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS,
POST, Runtime data area. Also initialize BIOS modules on POST entry and
GPNV area. Initialized CMOS as mentioned in the Kernel Variable
"wCMOSFlags."
Check CMOS diagnostic byte to determine if battery power is OK and
CMOS checksum is OK. Verify CMOS checksum manually by reading
storage area. If the CMOS checksum is bad, update CMOS with power-on
default values and clear passwords. Initialize status register A.
Initializes data variables that are based on CMOS setup questions.
Initializes both the 8259 compatible PICs in the system
Initializes the interrupt controlling hardware (generally PIC) and interrupt
vector table.
Do R/W test to CH-2 count reg. Initialize CH-0 as system timer. Install the
POSTINT1Ch handler. Enable IRQ-0 in PIC for system timer interrupt.
Traps INT1Ch vector to "POSTINT1ChHandlerBlock."
Fixes CPU POST interface calling pointer.
Initializes the CPU. The BAT test is being done on KBC. Program the
keyboard controller command byte is being done after Auto detection of
KB/MS using AMI KB-5.
Early CPU Init Start -- Disable Cache – Init Local APIC.
Set up boot strap processor Information.
Set up boot strap processor for POST.
Enumerate and set up application processors.
Re-enable cache for boot strap processor.
Early CPU Init Exit.
Initializes the 8042 compatible Key Board Controller.
Detects the presence of PS/2 mouse.
Detects the presence of Keyboard in KBC port.
Testing and initialization of different Input Devices. Also, update the Kernel
Variables.
Traps the INT09h vector, so that the POST INT09h handler gets control for
IRQ1. Uncompress all available language, BIOS logo, and Silent logo
modules.
Early POST initialization of chipset registers.
Relocate System Management Interrupt vector for all CPU in the system.
Uncompress and initialize any platform specific BIOS modules. GPNV is
initialized at this checkpoint.
Initializes different devices through DIM.
See DIM Code Checkpoints section of document for more information.
Initializes different devices. Detects and initializes the video adapter
installed in the system that have optional ROMs.
Initializes all the output devices.
Allocate memory for ADM module and uncompress it. Give control to ADM
module for initialization. Initialize language and font modules for ADM.
Activate ADM module.
Initializes the silent boot module. Set the window for displaying text
information.
39
Motherboard Manual
Checkpoint
37
38
39
3A
3B
3C
40
52
60
75
78
7C
84
85
87
8C
8D
8E
90
A1
A2
A4
A7
A9
AA
AB
AC
B1
00
40
Description
Displaying sign-on message, CPU information, setup key message, and any
OEM specific information.
Initializes different devices through DIM. See DIM Code Checkpoints section
of document for more information. USB controllers are initialized at this
point.
Initializes DMAC-1 & DMAC-2.
Initialize RTC date/time.
Test for total memory installed in the system. Also, Check for DEL or ESC
keys to limit memory test. Display total memory in the system.
Mid POST initialization of chipset registers.
Detect different devices (Parallel ports, serial ports, and coprocessor in
CPU, etc.) successfully installed in the system and update the BDA,
EBDA…etc.
Updates CMOS memory size from memory found in memory test. Allocates
memory for Extended BIOS Data Area from base memory. Programming the
memory hole or any kind of implementation that needs an adjustment in
system RAM size if needed.
Initializes NUM-LOCK status and programs the KBD typematic rate.
Initialize Int-13 and prepare for IPL detection.
Initializes IPL devices controlled by BIOS and option ROMs.
Generate and write contents of ESCD in NVRam.
Log errors encountered during POST.
Display errors to the user and gets the user response for error.
Execute BIOS setup if needed / requested. Check boot password if installed.
Late POST initialization of chipset registers.
Build ACPI tables (if ACPI is supported).
Program the peripheral parameters. Enable/Disable NMI as selected.
Initialization of system management interrupt by invoking all handlers.
Please note this checkpoint comes right after checkpoint 20h.
Clean-up work needed before booting to OS.
Takes care of runtime image preparation for different BIOS modules. Fill the
free area in F000h segment with 0FFh. Initializes the Microsoft IRQ Routing
Table. Prepares the runtime language module. Disables the system
configuration display if needed.
Initialize runtime language module. Display boot option popup menu.
Displays the system configuration screen if enabled. Initialize the CPU’s
before boot, which includes the programming of the MTRR’s.
Wait for user input at config display if needed.
Uninstall POST INT1Ch vector and INT09h vector.
Prepare BBS for Int 19 boot. Init MP tables.
End of POST initialization of chipset registers. De-initializes the ADM
module.
Save system context for ACPI. Prepare CPU for OS boot including final
MTRR values.
Passes control to OS Loader (typically INT19h).
TA970XE
6.5
TROUBLESHOOTING
Probable
There is no power in the system.
Power LED does not shine; the
fan of the power supply does not
work
2.
Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
1.
Solution
1.
2.
3.
Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.
System does not boot from a hard disk 1.
drive, but can be booted from optical
drive.
2.
System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
1.
Back up data and applications
files.
2.
Reformat the hard drive.
Re-install applications and data
using backup disks.
Screen message shows “Invalid
Review system’s equipment. Make sure
Configuration” or “CMOS Failure.”
correct information is in setup.
System cannot boot after user installs a 1.
Set master/slave jumpers
second hard drive.
correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
41
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
GERMAN
Spezifikationen
Sockel AM3+
CPU
Die AMD 64-Architektur unterstützt eine 32-Bit- und
AMD Sempron / Phenom II / Athlon II / FX 64-Bit-Datenverarbeitung
Prozessoren
FSB
Chipsatz
Unterstützt Hyper Transport 3.0
Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
AMD 970
AMD SB950
ITE 8728
Super E/A
Umgebungskontrolle,
Bietet die häufig verwendeten alten Super Hardware-Überwachung
E/A-Funktionen.
Lüfterdrehzahl-Controller
Low Pin Count-Schnittstelle
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 4
Dual-Kanal DDR3 Speichermodul
Arbeitsspeich Max. 32GB Arbeitsspeicher
er
Unterstützt DDR3 800/1066/1333/1600/1866
Jeder DIMM unterstützt 512MB/
Unterstützt DDR3 2000 (OC)
1GB/2GB/4GB/8GB DDR3.
Datentransferrate bis zu 6 Gb/s
SATA III
Integrierter Serial ATA-Controller
Konform mit der SATA-Spezifikation Version 3.0
Unterstützt RAID 0,1,5,10
LAN
10 / 100 / 1000 Mb/s Auto-Negotiation
Realtek RTL 8111E
Halb-/ Vollduplex-Funktion
7.1-Kanal-Audioausgabe
Audio-Codec ALC892
Unterstützt High-Definition Audio
USB3.0
Asmedia ASM1042
Datenübertragungsraten bis zu 600 MB / s
IEEE 1394
VIA VT6315N
1394a
Steckplätze
Onboard-Ans
chluss
42
PCI Steckplatz
x2
PCI Express Gen2 x1 Steckplatz
x2
PCI Express Gen2 x16 Steckplatz
x2
SATA-Anschluss
x5
Jeder Anschluss unterstützt 1 SATA-Laufwerk
Fronttafelanschluss
x1
Unterstützt die Fronttafelfunktionen
Front-Audioanschluss
x1
Unterstützt die Fronttafel-Audioanschlussfunktion
TA970XE
Spezifikationen
S/PDIF Ausgangsanschluss
x1
Verbraucher-IR Anschluss
x1
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x2
"CMOS löschen"-Sockel
x1
USB2.0-Anschluss
x2
Unterstützt die digitale Audioausgabefunktion
CPU-Lüfterstromversorgungsanschluss (mit Smart
Fan-Funktion)
System-Lüfter-Stromversorgungsanschluss
Jeder Anschluss unterstützt 2
Fronttafel-USB2.0-Anschlüsse
IEEE 1394-Anschluss
x1
Druckeranschluss Anschluss
x1
Serieller Anschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur / Maus
x1
Jeder Anschluss unterstützt 1 Druckeranschluss
Optisches + Coaxial S/PDIF Heraus x1
1394-Anschluss
x1
Rückseiten-E eSATA Anschluss
x1
/A
LAN-Anschluss
x1
USB2.0-Anschluss
x6
USB3.0-Anschluss
x2
Audioanschluss
x6
Platinengröße 305 mm (B) X 225 mm (L)
OS-Unterstüt
zung
Biostar behält sich das Recht vor, ohne Ankündigung
Windows XP / Vista / 7
die Unterstützung für ein Betriebssystem
hinzuzufügen oder zu entfernen.
43
Motherboard Manual
FRENCH
SPEC
Socket AM3+
UC
Processeurs AMD Sempron / Phenom II /
Athlon II / FX
Bus frontal
Chipset
Super E/S
L'architecture AMD 64 permet le calcul 32 et 64 bits
Prend en charge Hyper Transport 3.0
Prend en charge Hyper Transport 3.0
jusqu'à une bande passante de 5.2 GT/s
AMD 970
AMD SB950
ITE 8728
Initiatives de contrôle environnementales,
Fournit la fonctionnalité de Super E/S
Moniteur de matériel
patrimoniales la plus utilisée.
Contrôleur de vitesse de ventilateur
Interface à faible compte de broches
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 4
Mémoire
Capacité mémoire maximale de 32Go
principale
Chaque DIMM prend en charge des DDR3
de 512Mo/1Go/2Go/4Go/8Go
Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 800/1066/1333/1600/1866
Prend en charge la DDR3 2000 (OC)
Taux de transfert jusqu'à 6 Go/s.
SATA III
Contrôleur Serial ATA intégré
Conforme à la spécification SATA Version 3.0
Prise en charge RAID 0,1,5,10
LAN
10 / 100 / 1000 Mb/s négociation automatique
Realtek RTL 8111E
Half / Full duplex capability
Sortie audio à 7.1 voies
Codec audio ALC892
Prise en charge de l'audio haute définition
USB3.0
Asmedia ASM1042
Taux de transfert de données jusqu'à 600 Mo / s
IEEE 1394
VIA VT6315N
1394a
Fentes
Connecteur
embarqué
44
Fente PCI
x2
Fente PCI Express Gen2 x1
x2
Fente PCI Express Gen2 x16
x2
Connecteur SATA
x5
Connecteur du panneau avant
x1
Prend en charge les équipements du panneau avant
Connecteur Audio du panneau avant x1
Prend en charge la fonction audio du panneau avant
Connecteur de sortie S/PDIF
Prend en charge la fonction de sortie audio numérique
x1
Chaque connecteur prend en charge 1 périphérique
SATA
TA970XE
SPEC
Connecteur de IR du consommateur x1
Embase de ventilateur UC
x1
Embase de ventilateur système
x2
Embase d'effacement CMOS
x1
Connecteur USB2.0
x2
Connecteur IEEE 1394
x1
Connecteur de Port d'imprimante
x1
Port série
x1
Connecteur d'alimentation
x1
Alimentation électrique du ventilateur UC (avec fonction
de ventilateur intelligent)
Alimentation électrique du ventilateur système
Chaque connecteur prend en charge 2 ports USB2.0 de
panneau avant
Chaque connector prend en charge 1 Port d'imprimante
(24 broches)
Connecteur d'alimentation
x1
(4 broches)
E/S du
panneau
arrière
Dimensions
de la carte
Clavier / Souris PS/2
x1
Coaxial + Optique Sortie S/PDIF
x1
Port 1394
x1
Port eSATA
x1
Port LAN
x1
Port USB2.0
x6
Port USB3.0
x2
Fiche audio
x6
305 mm (l) X 225 mm (H)
Support SE Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de supprimer le
support de SE avec ou sans préavis.
45
Motherboard Manual
ITALIAN
SPECIFICA
Socket AM3+
CPU
L’architettura AMD 64 abilita la co mputazione 32
Processori AMD Sempron / Phenom II / e 64 bit
Athlon II / FX
FSB
Chipset
Supporto di Hyper Transport 3.0
Supporto di HyperTransport 3.0 fino a
5.2 GT/s di larghezza di banda
AMD 970
AMD SB950
ITE 8728
Super I/O
Funzioni di controllo dell’ambiente:
Fornisce le funzionalità legacy Super Monitoraggio hardware
I/O usate più comunemente.
Controller velocità ventolina
Interfaccia LPC (Low Pin Count)
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 4
Memoria
Capacità massima della memoria 32GB
principale
Ciascun DIMM supporta DDR3
Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800/1066/1333/1600/1866
Supporto di DDR3 2000 (OC)
512MB/1GB/2GB/4GB/8GB
Velocità di trasferimento dei dati fino a 6 Gb/s.
SATA III
Controller Serial ATA integrato
Compatibile specifiche SATA Versione 3.0
Supporto RAID 0,1,5,10
LAN
Codec
Negoziazione automatica 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Capacità Half / Full Duplex
Uscita audio 7.1 canali
ALC892
Supporto audio High-Definit ion (HD)
audio
USB3.0
Velocità di trasferimento dati fino a 600 MB / s
Asmedia ASM1042
IEEE 1394 VIA VT6315N
Alloggi
1394a
Alloggio PCI
x2
Alloggio PCI Express Gen2 x1
x2
Alloggio PCI Express Gen2 x16 x2
Connettore SATA
Connettori
su scheda
x5
Connettore pannello frontale
x1
Supporta i servizi del pannello frontale
Connettore audio frontale
x1
Supporta la funzione audio pannello frontale
Connettore output S/PDIF
x1
Supporta la funzione d’output audio digitale
Connettore IR del consumatore x1
46
Ciascun connettore supporta 1 unità SATA
TA970XE
SPECIFICA
Collettore ventolina CPU
x1
Collettore ventolina sistema
x2
Collettore cancellaz ione CMOS
x1
Connettore USB2.0
x2
Connettore IEEE 1394
x1
Connettore Porta stampante
x1
Porta seriale
x1
Connettore alimentazione
x1
Alimentazione ventolina CPU (con funzione Smart
Fan)
Alimentazione ventolina di sistema
Ciascun connettore supporta 2 porte USB2.0
pannello frontale
Ciascun connettore supporta 1 Porta stampante
(24 pin)
Connettore alimentazione
x1
(4 pin)
I/O
pannello
posteriore
Tastiera / Mouse PS/2
x1
Coaxial + Ottico S/PDIF Fuori
x1
Porta 1394
x1
Porta eSATA
x1
Porta LAN
x1
Porta USB2.0
x6
Porta USB3.0
x2
Connettore audio
x6
Dimension 305 mm (larghezza) x 225 mm
i scheda
(altezza)
Biostar si riserva il diritto di aggiungere o
Sistemi
operativi
supportati
Windows XP / Vista / 7
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.
47
Motherboard Manual
SPANISH
Especificación
Conector AM3+
CPU
La arquitectura AMD 64 permite el procesado de 32 y
Procesadores AMD Sempron / Phenom II / 64 bits
Athlon II / FX
FSB
Soporta las tecnologías Hyper Transport 3.0
Admite HyperTransport 3.0 con un ancho
de banda de hasta 5.2 GT/s
Conjunto de AMD 970
chips
AMD SB950
ITE 8728
Súper E/S
Iniciativas de control de entorno,
Le ofrece las funcionalidades heredadas de Monitor hardware
uso más común Súper E/S.
Controlador de velocidad de ventilador
Interfaz de cuenta Low Pin
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 4
Memoria
Capacidad máxima de memoria de 32GB
principal
Cada DIMM admite DDR de
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 800/1066/1333/1600/1866
Admite DDR3 de 2000 (OC)
512MB/1GB/2GB/4GB/8GB
Tasas de transferencia de hasta 6 Gb/s.
SATA III
Controlador ATA Serie Integrado
Compatible con la versión SATA 3.0
Admite RAID 0,1,5,10
Red Local
Códecs de
sonido
Negociación de 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Funciones Half / Full dúplex
Salida de sonido de 7.1 canales
ALC892
Soporte de sonido de Alta Definición
USB3.0
Asmedia ASM1042
Tasas de transferencia de datos hasta 600 MB / s
IEEE 1394
VIA VT6315N
1394a
Ranuras
Conectores
en placa
48
Ranura PCI
X2
Ranura PCI express Gen2 x1
X2
Ranura PCI express Gen2 x16
X2
Conector SATA
X5
Cada conector soporta 1 dispositivos SATA
Conector de panel frontal
X1
Soporta instalaciones en el panel frontal
Conector de sonido frontal
X1
Soporta funciones de sonido en el panel frontal
Conector de salida S/PDIF
X1
Soporta función de salida de sonido digital
Conector de IR del consumidor
X1
TA970XE
Especificación
Cabecera de ventilador de CPU
X1
Fuente de alimentación de ventilador de CPU (con
función Smart Fan)
Cabecera de ventilador de sistema X2
Cabecera de borrado de CMOS
X1
Conector USB2.0
X2
Cabecera IEEE 1394
x1
Conector Puerto de impresora
X1
Puerto serie
X1
Conector de alimentación
X1
Fuente de alimentación de ventilador de sistema
Cada conector soporta 2 puertos USB2.0 frontales
Cada conector soporta 1 Puerto de impresora
(24 patillas)
Conector de alimentación
X1
(4 patillas)
Panel
trasero de
E/S
Tamaño de
la placa
Teclado / Ratón PS/2
X1
Coaxial + óptico Salida S/PDIF
x1
Puerto 1394
x1
Puerto eSATA
X1
Puerto de red local
X1
Puerto USB2.0
X6
Puerto USB3.0
X2
Conector de sonido
X6
305 mm. (A) X 225 mm. (H)
Soporte de
sistema
operativo
Windows XP / Vista / 7
Biostar se reserva el derecho de añadir o retirar el
soporte de cualquier SO con o sin aviso previo.
49
Motherboard Manual
PORTUGUESE
ESPECIFICAÇÕES
Socket AM3+
CPU
A arquitectura AMD 64 permite uma computação de 32
Processadores AMD Sempron / Phenom II e 64 bits
/ Athlon II / FX
FSB
Chipset
Suporta as tecnologias Hyper Transport 3.0
Suporta a tecnologia HyperTransport 3.0
com uma largura de banda até 5.2 GT/s
AMD 970
AMD SB950
ITE 8728
Especificaçã
o Super I/O
Iniciativas para controlo do ambiente
Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.
Monitorização do hardware
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Interface LPC (Low Pin Count).
Ranhuras DIMM DDR3 x 4
Memória
principal
Capacidade máxima de memória: 32GB
Módulo de memória DDR3 de canal duplo
Cada módulo DIMM suporta uma
Suporta módulos DDR3 800/1066/1333/1600/1866
memória DDR3 de 512MB/
Suporta módulos DDR3 2000 (OC)
1GB/2GB/4GB/8GB
Velocidades de transmissão de dados até 6 Gb/s.
SATA III
Controlador Serial ATA integrado
Compatibilidade com a especificação SATA versão 3.0
Suporta as funções RAID 0,1,5,10
LAN
Codec de
som
Auto negociação de 10 / 100 / 1000 Mb/s
Realtek RTL 8111E
Capacidade semi/full-duplex
Saída de áudio de 7.1 canais
ALC892
Suporta a especificação High-Definition Audio
USB3.0
Asmedia ASM1042
Taxas de transferência de dados até 600 MB / s
IEEE 1394
VIA VT6315N
1394a
Ranhuras
Conectores
na placa
50
Ranhura PCI
x2
Ranhura PCI Express Gen2 x1
x2
Ranhura PCI Express Gen2 x16
x2
Conector SATA
x5
Cada conector suporta 1 dispositivo SATA
Conector do painel frontal
x1
Para suporte de várias funções no painel frontal
Conector de áudio frontal
x1
Suporta a função de áudio no painel frontal
TA970XE
ESPECIFICAÇÕES
Conector de saída S/PDIF
x1
Conector de IR do consumidor
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x2
Conector para limpeza do CMOS
x1
Conector USB2.0
x2
Conector IEEE 1394
x1
Conector da para impressora
x1
Porta série
x1
Conector de alimentação
x1
Suporta a saída de áudio digital
Alimentação da ventoinha da CPU (com a função Smart
Fan)
Alimentação da ventoinha do sistema
Cada conector suporta 2 portas USB2.0 no painel
frontal
Cada conector suporta 1 Porta para impressora
(24 pinos)
Conector de alimentação
x1
(4 pinos)
Teclado / Rato PS/2
x1
Coaxial + ótico Saída S/PDIF
x1
Entradas/S Porta 1394
x1
aídas no
Porta eSATA
x1
Porta LAN
x1
Porta USB2.0
x6
Porta USB3.0
x2
Tomada de áudio
x6
painel
traseiro
Tamanho
da placa
305 mm (L) X 225 mm (A)
A Biostar reserva-se o direito de adicionar ou remover
Sistemas
operativos
suportados
Windows XP / Vista / 7
suporte para qualquer sistema operativo com ou sem
aviso prévio.
51
Motherboard Manual
POLISH
SPEC
Socket AM3+
Procesor
Architektura AMD 64 umożliwia przetwarzanie 32 i 64
AMD Sempron / Phenom II / Athlon II / FX bitowe
Procesory
FSB
Obsługa Hyper Transport 3.0
Obsługa HyperTransport 3.0 o szerokości
pasma do 5.2 GT/s
Chipset
AMD 970
AMD SB950
Gniazda DDR3 DIMM x 4
Moduł pamięci DDR3 z trybem podwójnego kanału
Pamięć
Maks. wielkość pamięci 32GB
główna
Każde gniazdo DIMM obsługuje moduły
512MB/1GB/2GB/4GB/8GB DDR3
Obsługa DDR3 2000 (OC)
Funkcje kontroli warunków pracy,
ITE 8728
Super I/O
Obsługa DDR3 800/1066/1333/1600/1866
Zapewnia najbardziej powszechne funkcje Monitor H/W
Super I/O.
Kontroler prędkości wentylatora
Interfejs Low Pin Count
Funkcja ITE "Smart Guardian"
Transfer danych do 6 Gb/s.
SATA III
Zintegrowany kontroler Serial ATA
Zgodność ze specyfikacją SATA w wersji 3.0
Obsługa RAID 0,1,5,10
10 / 100 / 1000 Mb/s z automatyczną negocjacją
LAN
Realtek RTL 8111E
szybkości
Działanie w trybie połowicznego/pełnego dupleksu
Kodek
dźwiękowy
7.1 kanałowe wyjście audio
ALC892
Obsługa High-Definition Audio
USB3.0
Asmedia ASM1042
Cena transferu danych do 600 MB / s
IEEE 1394
VIA VT6315N
1394a
Gniazda
Złącza
Gniazdo PCI
x2
Gniazdo PCI Express Gen2 x1
x2
Gniazdo PCI Express Gen2 x16
x2
Złącze SATA
x5
Złącze panela przedniego
wbudowane Przednie złącze audio
Złącze wyjścia S/PDIF
52
Każde złącze obsługuje 1 urządzenie SATA
x1
Obsługa elementów panela przedniego
x1
Obsługa funkcji audio na panelu przednim
x1
Obsługa funkcji cyfrowego wyjścia audio
TA970XE
SPEC
Złącze Konsument IR
x1
Złącze główkowe wentylatora
procesora
x1
Złącze główkowe wentylatora
systemowego
x2
Zasilanie wentylatora procesora (z funkcją Smart Fan)
Zasilanie wentylatora systemowego
Złącze główkowe kasowania
CMOS
x1
Złącze USB2.0
x2
Złącze IEEE 1394
x1
Złącze Port drukarki
x1
Port szeregowy
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura / Mysz PS/2
x1
Optyczny +coaxial wyjścia S/PDIF
x1
Port 1394
x1
Back Panel Port eSATA
I/O
Wymiary
płyty
operacyjne
go
przednim
Każde złącze obsługuje 1 Port drukarki
x1
Port LAN
x1
Port USB2.0
x6
Port USB3.0
x2
Gniazdo audio
x6
305 mm (S) X 225 mm (W)
Obsluga
systemu
Każde złącze obsługuje 2 porty USB2.0 na panelu
Biostar zastrzega sobie prawo dodawania lub
Windows XP / Vista / 7
odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.
53
Motherboard Manual
RUSSIAN
СПЕЦ
CPU
(центральн
ый
процессор)
FSB
Набор
Гнездо AM3+
Архитектура AMD 64 разрешать обработка
Процессоры AMD Sempron / Phenom II /
данных на 32 и 64 бит
Athlon II / FX
Поддержка Hyper Transport 3.0
Поддержка HyperTransport 3.0 с
пропускной способностью до 5.2 GT/s
AMD 970
микросхем AMD SB950
Слоты DDR3 DIMM x 4
Основная
Максимальная ёмкость памяти 32ГБ
память
Каждый модуль DIMM поддерживает
512МБ/1ГБ/2ГБ/4ГБ/8ГБ DDR3
Super I/O
Модуль памяти с двухканальным режимом DDR3
Поддержка DDR3 800/1066/1333/1600/1866
Поддержка DDR3 2000 (OC)
ITE 8728
Инициативы по охране окружающей среды,
Обеспечивает наиболее используемые
Аппаратный монитор
действующие функциональные
Регулятор скорости
возможности Super I/O.
Функция ITE "Smart Guardian"
Интерфейс с низким количеством выводов (Интеллектуальная защита)
SATA III
Локальная
сеть
Встроенное последовательное устройство
управления ATA
скорость передачи данных до 6 гигабит/с.
Соответствие спецификации SATA версия 3.0
Поддержка RAID 0,1,5,10
Автоматическое согласование 10 / 100 / 1000
Realtek RTL 8111E
Мб/с
Частичная / полная дуплексная способность
Звуковой
кодек
USB3.0
Asmedia ASM1042
IEEE 1394
VIA VT6315N
Слоты
Встроенны
й разъём
54
Звуковая поддержка High-Definition
ALC892
7.1канальный звуковой выход
скорости передачи данных до 600 МБ / с
1394a
Слот PCI
x2
Слот PCI Express Gen2 x1
x2
Слот PCI Express Gen2 x16
x2
Разъём SATA
x5
Каждый разъём поддерживает 1 устройство SATA
Разъём на лицевой панели
x1
Поддержка устройств на лицевой панели
Входной звуковой разъём
x1
Разъём вывода для S/PDIF
x1
Поддержка звуковых функций на лицевой
панели
Поддержка вывода цифровой звуковой функции
TA970XE
СПЕЦ
Разъём едока ИКЫЙ
x1
Источник питания для вентилятора центрального
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы
x2
процессора (с функцией интеллектуального
вентилятора)
Источник питания для вентилятора системы
Открытое контактирующее
приспособление CMOS
x1
USB2.0-разъём
x2
IEEE 1394-разъём
x1
Разъём Порт подключения
принтера
Каждый разъём поддерживает 2 USB2.0-порта на
лицевой панели
Каждый разъём поддерживает 1 Порт
x1
Последовательный порт
x1
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Клавиатура / Мышь PS/2
x1
подключения принтера
Оптически +coaxial вывода для S/PDIF
x1
Задняя
панель
средств
1394-порт
x1
eSATA порт
x1
ввода-выв Порт LAN
x1
ода
USB2.0-порт
x6
USB3.0-порт
x2
Гнездо для подключения
наушников
Размер
панели
Поддержка
OS
x6
305 мм (Ш) X 225 мм (В)
Biostar сохраняет за собой право добавлять или
Windows XP / Vista / 7
удалять средства обеспечения для OS с или без
предварительного уведомления.
55
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪AM3+‬ﻡﻘﺒﺲ‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰﻳﺔ‬
‫‪AMD Sempron / Phenom II / Athlon II‬ﻡﻌﺎﻟﺠﺎت‬
‫‪/ FX‬‬
‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬
‫و ‪Hyper Transport3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ 5.2‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪HyperTransport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ‬
‫‪GT/s‬‬
‫‪AMD 970‬‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪AMD SB950‬‬
‫ﻓﺘﺤﺔ ‪DDR3 DIMM‬‬
‫ﻋﺪد‪4‬‬
‫ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR3‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 32‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﺳﻌﺎت ‪DDR3 1866/1600/1333/1066/800‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﻡﻴﺠﺎ ‪ /512‬ﺳﻌﺔ ‪ DDR3‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻡﻴﺠﺎ ﺏﺎﻳﺖ‬
‫)‪ 2000 (OC‬ﺳ ﻌﺎت ‪ DDR3‬ﻧ ﻮع ﻣﻦ اﻟﺬاآﺮة ﺗ ﺪﻋﻢ‬
‫ﺏﺎﻳﺖ و‪ /1‬و‪ /2‬و‪ /4‬و‪ 8‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫‪ITE 8728‬‬
‫‪Super I/O‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 6‬ﺝﻴﺠﺎﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪SATA III‬‬
‫‪ 3.0‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫‪RAID 0,1,5,10‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺑﺎیﺖ ‪ /‬ﺛﺎﻧﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺑﺖ‪/‬ﺛﺎﻧﻴﺔ‬
‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬
‫‪Realtek RTL 8111E‬‬
‫آﻮدﻳﻚ اﻟﺼﻮت‬
‫‪ALC892‬‬
‫‪USB3.0‬‬
‫‪Asmedia ASM1042‬‬
‫ﺛﺎﻧﻴ ﺔ ‪ /‬ﺑﺎی ﺖ ﻣﻴﻐ ﺎ ‪ 600‬إﻟ ﻰ ﺗﺼ ﻞ ﺑﻴﺎﻧ ﺎت ﻧﻘ ﻞ ﻣﻌﺪﻻت‬
‫‪IEEE 1394‬‬
‫‪VIA VT6315N‬‬
‫‪1394a‬‬
‫اﻟﻔﺘﺤﺎت‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺣﺔ‬
‫إﻣﻜﺎﻧﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫‪ 7.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪ‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x1‬‬
‫ﻋﺪد ‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI Express Gen2 x16‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ ‪SATA‬‬
‫ﻋﺪد‪5‬‬
‫‪SATA‬ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ‬
‫ﻡﻨﻔﺬ اﻷﺣﻤﺮ ﺗﺤ ﺖ ﻡﺴ ﺘﻬﻠﻜﺔ‬
‫ﻋﺪد ‪1‬‬
‫‪56‬‬
‫‪TA970XE‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫‪Smart Fan‬ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪ‪2‬‬
‫ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫وﺹﻠﺔ ﻡﺴﺢ ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ ‪IEEE 1394‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪4‬دﺏﺎﺏﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ ‪ /‬ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺤﻮر ﻡﺘّﺤﺪ ‪+‬ﺏﺼﺮﻳّﺔ ﻡﻨﻔﺬ ﺥﺮج ‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪1394‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬
‫ﻡﻨﻔﺬ‪eSATA‬‬
‫ﻋﺪد‪1‬‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪USB2.0‬‬
‫ﻋﺪد ‪6‬‬
‫ﻡﻨﺎﻓﺬ ‪USB3.0‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪6‬‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬
‫‪ 305‬ﻡﻢ )ﻋﺮض( ‪ 225 X‬ﻡﻢ )ارﺗﻔﺎع(‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪Windows XP / Vista / 7‬‬
‫‪57‬‬
‫ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ ‪ USB2.0‬ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو ﺏﺪون ‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫إﺥﻄﺎر‪.‬‬
Motherboard Manual
JAPANESE
仕様
Socket AM3+
CPU
AMD 64アーキテクチャでは、32ビットと64ビット計算が
AMD Sempron / Phenom II / Athlon II / FX プ 可能です
ロセッサ
FSB
ハイパートランスポート3.0サポートします
5.2 GT/sのバンド幅までハイパートランスポート
3.0をサポートします
AMD 970
チップセット
AMD SB950
DDR3 DIMMスロット x 4
デュアル チャンネルモードDDR3メモリモジュール
最大メモリ容量32GB
メインメモリ
各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3
DDR3 800/1066/1333/1600/1866 をサポート
DDR3 2000 (OC) をサポート
をサポート
Super I/O
ITE 8728
環境コントロールイニシアチブ、
もっとも一般に使用されるレガシーSuper I/O機
H/Wモニター
能を採用しています。
ファン速度コントローラ/ モニター
低ピンカウントインターフェイス
ITEの「スマートガーディアン」機能
最高6 Gb/秒のデータ転送速度
SATA III
SATAバージョン3.0仕様に準拠。
統合シリアルATAコントローラ
RAID 0,1,5,10のサポート
LAN
サウンド
Codec
10 / 100 / 1000 Mb/秒のオートネゴシエーション
Realtek RTL 8111E
半/全二重機能
ハイデフィニションオーディオのサポート
ALC892
7.1 チャンネルオーディオアウト
USB3.0
Asmedia ASM1042
データ転送速度最大600 MB /秒の
IEEE 1394
VIA VT6315N
1394a
スロット
PCIスロット
x2
PCI Express Gen2 x1スロット
x2
PCI Express Gen2 x16スロット
x2
SATAコネクタ
x5
各コネクタは1つのSATAデバイスをサポートします
フロントパネルコネクタ
x1
フロントパネル機能をサポートします
フロントオーディオコネクタ
x1
フロントパネルオーディオ機能をサポートします
S/PDIFアウトコネクタ
x1
デジタルオーディオアウト機能をサポートします
消費者IRコネクタ
x1
オンボードコ
ネクタ
58
TA970XE
仕様
CPUファンヘッダ
x1
CPUファン電源装置(スマートファン機能を搭載)
システムファンヘッダ
x2
システムファン電源装置
CMOSクリアヘッダ
x1
USB2.0コネクタ
x2
各コネクタは2つのフロントパネルUSB2.0ポートをサポ
ートします
IEEE 1394コネクタ
x1
プリンタポートコネクタ
x1
シリアルポート
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード / マウス
x1
光学+coaxial S/PDIFアウト
x1
1394ポート
x1
背面パネル
eSATAポート
x1
I/O
LANポート
x1
USB2.0ポート
x6
USB3.0ポート
x2
オーディオジャック
x6
各コネクタは1つのプリンタポートをサポートします
ボードサイズ 305 mm (幅) X 225 mm (高さ)
OSサポート Windows XP / Vista / 7
Biostarは事前のサポートなしにOSサポートを追加または
削除する権利を留保します。
2012/05/21
59
Процессоры
Кулеры и другие системы
охлаждения
Корпуса
Аксессуары для систем
охлаждения
Модули памяти для ПК и
ноутбуков
Блоки питания
Звуковые карты
Аксессуары к
материнским платам
Видеокарты
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement