XProtect® Go 2016 Specification Sheet

XProtect® Go 2016 Specification Sheet
XProtect® Go 2016
Specification Sheet
Contents
Feature Overview ................................................................................................................ 3
XProtect Go server modules .......................................................................................................................... 3
XProtect Go client modules ........................................................................................................................... 3
Detailed Product Features ................................................................................................... 4
XProtect Go server modules .......................................................................................................................... 4
XProtect Go Server 2016 ........................................................................................................................... 4
XProtect Go client modules ........................................................................................................................... 6
XProtect Smart Client ................................................................................................................................ 6
XProtect Web Client .................................................................................................................................. 7
Milestone Mobile ...................................................................................................................................... 7
System Requirements.......................................................................................................... 8
Supported languages ........................................................................................................... 8
Licensing structure ............................................................................................................... 8
Base server license .................................................................................................................................... 8
Client license.............................................................................................................................................. 8
2
Feature Overview
XProtect Go server modules
•
•
•
•
•
•
•
•
•
•
•
Single-server video surveillance solution:
Supports up to eight IP cameras, USB cameras or
analog cameras
Single user system
Supports one concurrent user
Wide IP camera and device support:
Supports more than 2,400 IP cameras, encoders
and DVRs from 120 different manufacturers
ONVIF™ and PSIA compliant:
Supports ONVIF™ and PSIA compliant cameras
and devices
Optimized recording storage management:
Unique data storage and archiving solution that
combines superior performance and scalability
with cost-efficient, long-term video storage
Wide compression technology support:
Supports a variety of compression methods:
MJPEG, H.263, MPEG-4 Pt. 2 Simple Profile and
Advanced Simple Profile, H.264/MPEG-4 AVC,
and MxPEG
Dual streaming:
Hardware use is optimized with two independent,
configurable video streams, one for live viewing
and one for recording. No client side configuration
needed
System configuration wizards:
Guide the user through the process of adding
cameras, configuring video and recording,
adjusting motion detection and configuring users
Built-in video motion detection:
Independent of camera model and supporting up
to 26 cameras simultaneously
Privacy masking:
Enables administrators to define privacy masks for
individual cameras to hide areas in the camera
view that must not be visible or recorded in order
to comply with local legislation
Easy installation:
Start an installation with a few mouse clicks – all
languages and applications in one installer
(Management Application supports 11 languages).
Unified installer that is shared between all
XProtect Professional VMS products 1. Users can
add components to or remove them from your
installation at a later time
1
XProtect Enterprise, XProtect Professional, XProtect Express,
XProtect Essential and XProtect Go
XProtect Go client modules
•
•
•
•
•
•
•
•
Power of choice:
Use any combination of the three available clients,
XProtect Smart Client, XProtect Web Client and
Milestone Mobile
View live video:
Use any client for constant live monitoring
View recorded video:
Use any client to review incidents
Common design:
The XProtect clients share common design and
basic functionalities, such as camera views,
enabling a seamless switch between interfaces as
needs require
PTZ Control:
Pan-tilt-zoom (PTZ) cameras can be controlled
with any of the clients; therefore, suspicious
activity can be investigated
Share or export recordings:
Export video in various formats. Moreover,
instantly share exports between Milestone Mobile
and XProtect Web Client using a server side
export to avoid moving large files through remote
connections
Output control and event triggering:
Use any client to activate system events or trigger
outputs on the connected devices
Available in 29 languages
Use any of the clients in your preferred language
from the list of the 29 languages supported
Detailed Product Features
•
XProtect Go server modules
XProtect Go Server 2016
Management Application
•
A single Management Application provides a
consolidated single point of access to the XProtect
Go Recording Server
•
System configuration wizards guide the user
through the process of adding cameras,
configuring video and recording, adjusting motion
detection and configuring users
•
Device scanning enables the fast discovery of
camera devices using methods such as Universal
Plug and Play, broadcast and IP range scanning
•
Smart bulk configuration option allows
simultaneous changes to the settings across
multiple devices and in few clicks
•
The adaptable application behavior guides novice
users, while expert users can optimize the
application for a more advanced use
•
The export and import of system and user
configuration data enables a reliable system
operation and fast system recovery
•
System cloning enables users to efficiently clone
multiple systems with the same or similar
configuration
•
The import of offline configuration data enables
offline editing of configuration data including
camera and device definitions
•
Each time a configuration change is confirmed,
automatic system restore points are created
enabling an easy rollback to previously defined
system configuration points. This also enables the
cancelation of undesired configuration changes
and restoration of earlier valid configurations
•
Automatic configuration wizard helps users to
configure the system when the Management
Application starts for the first time
Recording Server
•
Native 64-bit recording server provides for optimal
utilization of available hardware resources
•
Up to 8 installed cameras; simultaneous recording
and live view of all the cameras
•
Recording quality depends entirely on camera and
video encoder capabilities: no software limitation
(30+ frames per second per camera)
•
Cameras supporting SSDP, mDNS or ONVIF
Discovery added to the local network can
automatically be discovered and installed in the
default Smart Client view
•
Dual streams from cameras can be optimized
individually on compression, resolution and frame
rate, meeting recording and live monitoring
requirements
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bandwidth is optimized with multi-streaming by
splitting a single camera video stream to different
streams for live view and recording, therefore they
can each be optimized independently with respect
to frame rate and resolution
Simultaneous digital multi-channel video and
audio recording and live viewing (relaying)
Connectivity to cameras and video encoders
supports MJPEG, H.263, MPEG-4 Pt. 2 Simple
Profile and Advanced Simple Profile,
H.264/MPEG-4 AVC, and MxPEG
Recording technology: secure high-speed
database holding JPEG images or MPEG4 and
MxPEG streams including audio
Five days recording capacity with multiple
archives possible per day
Hourly to daily database archiving with optional
automatic move to network drive saves storage
capacity on the local server – with images still
available transparently for playback
Start recording on event
Authenticate access based on local Windows user
account, or XProtect user name and password
Authorize access privileges per local Windows
user account, XProtect user profile or grant full
access
Audit logs of exported evidence by user and file
Audit logs of client user activity by time, location
and camera
Local console management of the Recording
Server accessible from the notification area
o Start and stop Recording Server service
o Access to Recording Server configuration
settings
o Access to Recording Server help system
o View system status and log information
o Built-in web server for download and launch of
clients and plug-ins
Remote access for XProtect Smart Client and
XProtect Web Client
User profiles control access to: live view, PTZ,
PTZ presets, output control, events, listen to
microphone, talk to speaker, manual recording;
playback, AVI export, JPG export, XProtect
(database) export, sequences, Smart Search and
audio – as well as set up views, edit private views
and edit shared public views
Client-initiated start of recording based on
predefined recording time or manual stop and
access privileges
Start cameras on live view requests from clients
Built-in camera independent motion detection;
choice of fully adjustable sensitivity or automatic
sensitivity adjustment, zone exclusions, recording
activation with frame rate speed up, and alert
activation through email
PTZ preset positions, up to 25 per camera
Absolute and relative PTZ positioning
Copy a Smart Client – Player to all hard drives
used for recording and archiving. A Smart Client
Project file is also created (when the recording
4
server is shut down), making it simple and easy to
access video even if the hard drive is removed
from the server
Mobile Server
•
Runs as a dedicated service allowing it to be
installed either together with an existing
installation or on dedicated hardware for more
demanding installations
•
Can transcode video so the streams are robust
and can adapt to changing connection bandwidth.
The server also optimizes the use of available
bandwidth to get the best possible stream quality
•
Several options for the administrator to configure
the system to meet performance expectations.
Including optional transcoding, client-side
decoding, or a dynamic combination depending on
streams
•
The Mobile server plugin in the Management
Application gives access to the Milestone Mobile
server management in order to change default
settings and read out miscellaneous status
information
•
Can be configured through the tray controller to
easily adjust or update settings
•
Use either a default-generated certificate for
HTTPS encrypting the connection to the Milestone
Mobile server or provide your own custom
certificate
•
All configuration of Video Push is done from the
server, therefore users can download and use the
Milestone Mobile client without having to do any
configuration
•
Supports creating server side export through
XProtect Web Client and Milestone Mobile
•
The Milestone Mobile management plugin allows
administrators to configure codec used as well as
manage ongoing and completed exports
•
Automatically installs XProtect Web Client. No
additional setup is needed
5
XProtect Go client modules
XProtect Smart Client
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dedicated task-oriented tab for the Sequence
Explorer in addition to the traditional Live and
Playback tabs
Application theme support with choice of dark or
light theme
Installed per default on Recording Server for local
viewing and playback of video and audio
Start recording on cameras for a pre-defined time
(default five minutes). Subject to privileges set by
administrator
Support for native 64-bit operating systems
Independent playback capability allows for instant
playback of recorded video for one or more
cameras, while in live and playback mode
Seamlessly export video in various formats
Live view digital zoom allows zoomed-out
recordings while the operator can digitally zoom in
to see details
“Update on Motion only” optimizes CPU use by
allowing motion detection control whether or not
the image should be decoded and displayed. The
visual effect is a still image in the view until motion
is detected
Shared and private camera views offer 1x1 up to
10x10 layouts in addition to asymmetric views
Views optimized for both 4:3 and 16:9 screen
ratios
Hotspot function to work in detail with a camera
selected from a view containing multiple cameras
Carousel function allows a specified view to rotate
between pre-defined cameras with individual
timing and order with multiple appearances
Carousel function can be controlled allowing the
operator to pause the carousel function and to
switch to the previous or the next camera
Overlay buttons provide an intuitive control of
cameras, camera-integrated devices and other
integrated systems directly from the camera view
The cameras’ built-in audio sources are available
in live and in playback
Separate pop-up window displaying sequences
and time intervals in thumbnail previews, the
Sequence Explorer provides a visual overview of
recorded video combined with smooth navigation
– Presents recorded sequences for individual
cameras or all cameras in a view
– Available in both live and playback modes
– Smooth navigation with sliding preview and
“drag-and-throw” function for video thumbnails
– Instant playback of video sequences
Application options allow users to adapt the layout
and personalize the application according to their
preferences
360° ImmerVision Enables® panomorph lens
technology removes blind spots and allows
operators to track, detect and analyze the entire
area in live or playback mode. Only one camera
license required for the 360° panomorph lens
•
Create, edit or delete PTZ presets (not possible
for PTZ type 2, where PTZ presets are stored in
the camera device, but can’t be modified from the
XProtect software)
• Support for hardware accelerated decoding using
Intel Quick Sync video
• Control PTZ cameras by using;
- PTZ preset positions
- PTZ point-and-click control
- Overlay buttons
- PTZ zoom to a defined rectangle
- Video overlaid PTZ control
- Virtual joystick function
- Joystick
6
XProtect Web Client
•
•
•
•
•
•
•
•
•
•
•
•
•
Access XProtect Smart Client views through a
browser to avoid using any advanced features
Shared views can be managed centrally via the
server with administrator/user rights and user
groups
Playback video easily including fast/slow
playback, single frame step and jump to date/time
with frame preview while adjusting time
Control PTZ cameras remotely using preset
positions
Dynamic bandwidth optimization when streaming
from server to client giving a better use of
bandwidth
Optional client-side decoding for improved video
quality and reduced server load
Create AVI files or save JPEG images
Create investigations with one or more cameras to
quickly access them from anywhere and convert
to exports when needed
Export on the server to avoid moving large video
files back and forth. Users can download only the
files they need or save them to download when a
faster connection is available
Trigger outputs and events with live view of a
related camera
System login using XProtect user name and
password
Secure connection through HTTPS
No installation required
Milestone Mobile
•
•
•
Add login credentials for multiple servers in the
Milestone Mobile Client to easily switch between
sites or different connection addresses
Views are inherited from the connected XProtect
VMS system. The client automatically obtains the
user’s private and shared views from the system to
be used as camera lists in the Milestone Mobile
client
A view with all cameras is automatically generated,
allowing the Milestone Mobile client to be used
•
•
•
•
•
•
•
•
•
when no views are set up. It also provides a quick
way of searching through cameras
Cameras can be viewed in full screen to take better
advantage of the device’s screen. It is also possible
to search through cameras in a view while in full
screen by swiping left or right
Digital pinch to zoom enables users to zoom in on a
part of the image for closer review and conduct
detailed investigation of video when using
megapixel or high-definition cameras
Playback recordings from the database and select
a specific time or recorded sequence to start
playback, step through recordings and select a
playback speed
View recordings from the database while keeping
an eye on what is currently happening. The client
displays a live picture-in-picture frame of the same
camera when in playback mode. The picture-inpicture can be moved by dragging and doubletapping will return to live view
Control PTZ cameras manually or by selecting
predefined presets for quick navigation
Video Push allows users to use the camera in their
mobile as any other camera in the installation. It is
very easy to use and requires no setup in the
mobile device
Trigger outputs and events:
Administrators can use their mobile device to
trigger outputs connected to the XProtect VMS or
trigger user-defined events to have greater control
while on the go
Connect securely to the Milestone Mobile server
using HTTPS encryption
Export on the server to avoid moving large video
files back and forth. Users can download only the
files they need or save them to download later
when a faster connection is available
7
System Requirements
The listing of the system requirements are moved online to better service our customers. Please find the system
requirements per product here:
http://www.milestonesys.com/SystemRequirements
Supported languages
For details on supported languages, please refer to:
http://www.milestonesys.com/SupportedLanguages
Licensing structure
Base server license
•
•
•
XProtect Go is completely free and only requires registration to operate beyond 30 days
Annual re-registration required for continued use
The XProtect Go free server license allows for up to eight devices to be added
The free server license contains the XProtect Go server modules: Recording Server, Recording Server Manager,
Image Server, plus the client modules: XProtect Smart Client, XProtect Mobile and XProtect Web Client
Client license
•
The XProtect Go client modules: XProtect Smart Client, XProtect Smart Client – Player, XProtect Web Client and
XProtect Mobile do not require additional licenses and can be installed and used on a number of terminals
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement