GE ZIF36NMLH Monogram® 36" Built-In All Freezer Quick Specs


Add to my manuals

advertisement

GE ZIF36NMLH Monogram® 36

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Enclosure Cutout and Product Dimensions (in inches)

10-3/4" Max.

10" Min.

24-3/4"

35" Case

36" Overall

ZIF36NMRH, Freezer

Handle on the left side, the door swings left to right.

ZIF36NMLH, Freezer

Handle on the right side, the door swings right to left.

73-1/2"

26-3/4"

84-1/2" Max.

83-1/2" Min.

Caution

Refrigerators are much heavier at the top than at the bottom – be extra careful when moving.

4"

• To achieve a flush fit, the finished cutout width must be

at least 36" wide.

Width

24-3/4"

Case

Depth

• In a semi-flush installation, the finished cutout must

be 35-1/2".

• The electrical and water locations must be located as

shown for either type of installation.

35"

Case

Width

24-3/4"

Case

Depth

26-1/4"

Including

Handle

36"

Frame to Frame 84*

461Dia27

Including

Handle

Frame to Frame

*Shipped at 84" installation height. Can be adjusted to

83-1/2" or 84-1/2" with Grille Panel Kits.

84-1/2" max

83-1/2" min

Finished

Opening

*Finished Width

2-1/2

6

Electrical

Area

5

5

24 3/4" Total

Depth *Finished Width

2-1/2

Wall View

75" From Floor to Bottom of Electrical

Area

3-1/2

*36" for a flush installation.

Finished

Opening

75" From Floor

35-1/2" Min. for a semi-flush installation.

Area panels are used. Add side panel thickness to the finished

3-1/2

Specification Revised 4/05

110156

R

Listed by

Underwriters

Laboratories

For answers to your Monogram, ® GE Profile ™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center ® service, 800.626.2000.

ZIF36NM – GE Monogram 36" Built-In All-Freezer

1/4" Accessory Panels:

Factory trim accepts accessory panel kits. Panels are cut to size and ready to install. Kits must be ordered separately.

Models

White

Lexan ®

Black

Lexan ®

Stainless

Steel

ZIR36/ZIF36 ZWWR36 ZWBR36

Door Handles – To match or complement cabinetry!

ZWSR36

ZKHR1 – Provides the necessary framework to install a custom handle of your choice, onto a 1/4" thick custom panel. (Handle not included.)

ZKHTR1 – Provides the necessary framework to install a custom handle of your choice, onto a 3/4" thick custom panel.

(Handle not included.) This kit must be used in combination with

ZKTR36LH or ZKTR36RH.

ZKHRSS1 – Tubular stainless steel handle for 1/4" thick panel installation.

ZKHTRSS1 – Tubular stainless steel handle for 3/4" thick panel installation. This kit must be used in combination with ZKTR36LH or ZKTR36RH.

• Side panels are required whenever the sides of the product will be exposed and when installed between frameless cabinets.

• Side panels are not required when installed into an enclosure.

• Side panel installation will be determined by the design of the side panel you have previously chosen.

• Side panels must be installed plumb.

Illustration A

1/4" Side Panels – Insert end of side panel into case trim. Fasten with hook and loop strips.

23 9/16"

Custom Panels – Match the cabinetry!

ZKTR36LH for ZIR36NMLH, ZIF36NMLH

ZKTR36RH for ZIR36NMRH, ZIF36NMRH

Provides for the installation of 3/4" thick custom door and grille panels. Use this kit for a trimless appearance. This kit provides a standard handle to fit the 3/4" panel.

Grille Panel – For Installation height adjustments!

ZGC2 – Provides 1/4" grille panel frame side pieces for 83-1/2" and 84-1/2" installation heights. The supplied grille panel frame is set for 84".

Side-by-Side Installation

ZUG75 Trim Kit – For side-by-side installation of two trimmed units. This kit provides for the installation of a unified 3/4" grille panel to span the width of two units. This kit contains a trim strip to cover the inside case trim for a finished appearance.

This kit must be used in combination with BOTH the

ZKTR36LH and ZKTR36RH kits.

• If you choose to use 1/4" side panels, they should be inserted into the case trim as illustrated. Fasten the panels to the product with stick-on hook and loop fastener strips (not provided) before setting in place. See illustration A.

251Dia35

• 1/2" to 3/4" side panels are normally set into place and fastened to adjacent cabinetry or the back wall before rolling the product into the opening. See illustration B.

Illustration B

1/2" to 3/4" Side Panels –

Leading edge of side panel is flush with cabinet front.

Fasten to the back wall using a cleat.

24 3/4"

84" 84"

Trim

2 9/16"

Top View

Standard 4" high toekick or trim to fit.

Height may vary depending on application.

Specification Revised 4/05

110156

R

Top View

Standard 4" high toekick or trim to fit.

Height may vary depending on application.

3 3/4"

Listed by

Underwriters

Laboratories

For answers to your Monogram, ® GE Profile ™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center ® service, 800.626.2000.

461Dia37

461Dia38

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Installation at End of Run

1/2" Thick

Side Panels

Finished Dim.

Roughed-In Dim.

36"

37"

Finished Dim.

Rough-In Dim.

1/2" Thick

Side Panels

72"

73"

1/4" Thick

Side Panels

Refrigerator and Freezer installed side-by-side

Finished Dim.

Rough-In Dim.

Side-By-Side Installation of Freezer and Refrigerator

71 1/2"

72"

Refrigerator

Cabinet

Refrigerator Door

Cabinet

Note: 1/2" thick side panels shown. Side panels can be any thickness. Add side panel thickness to outside trim width

(36" or 72" for two models) to calculate the rough-in dimension. The leading

(front) edge must be finished to match surrounding cabinetry.

461Dia15

*Finished Width

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Custom Panel Dimensions

A

Custom

Panel

IMPORTANT: Maximum weight for custom door panel is 67 pounds and

9 pounds for the grille panel.

Custom Grille Panel Dimensions

Width

Height Custom Grille Panels

Rout for 3/4"

Handle Kits Only

See Details

Routing Detail

For Handle Kits Only

Rout Back Side of Panel

1-13/16"

B

SIZES

1/4" Panels

3/4" Panels

CUSTOM DOOR PANEL SIZES

A

35-1/16"

35-1/16"

3/4" Panels

251Dia36

B

68-7/8"

68-15/16"

68-15/16"

1/4" THICK CUSTOM GRILLE PANEL

Panel

Width

35-1/8"

Panel Height to Fit Installation Height

83-1/2"

7-1/2"

84"

8"

84-1/2"

8-1/2"

Note: The grille panel frame is factory assembled for 84" installation height. Order ZGC2 Grille Panel

Kit when installation height is more or less than 84".

251Dia38

Panel

Width

35-1/4"

Panel Height to Fit Installation Height

83-1/2"

7-3/4"

84"

8-1/4"

84-1/2"

8-3/4"

Note: A grille panel support is included with the

ZKTR36 trim kit and fits all installation heights.

ZUG75 Grille Panel Dimensions

This Grille Panel Kit should be used in combination with ZKTR36H and ZKTR36RH, 3/4" panel kits.

Width

Height ZUG75 Grille Panel

1/4"

Max.

Appearance Side

Rout the panel when installing a ZKHTR1 Custom

Handle Kit or ZKHTRSS1, Tubular Stainless Steel

Handle Kit.

Panel

Width

71-3/8"

3/4" THICK CUSTOM GRILLE PANEL

Requires ZUG75 Trim Kit

Panel Height to Fit Installation Height

251Dia101

7-3/4" 8-1/4"

84-1/2"

8-3/4"

251Dia37

Specification Revised 4/05

110156

R

Listed by

Underwriters

Laboratories

For answers to your Monogram, ® GE Profile ™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center ® service, 800.626.2000.

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Clearances

• Factory set for a 130° door swing. Order WX14X99 adjustable door stop to reduce swing to as little as 90°.

When Installed into a corner:

Allow 25" for a full 130° door swing. Allow 15" for pan removal. Allow 4" min. clearance when door swing is adjusted to a 90° opening for pan access, but pan removal is restricted.

130 ° Door Swing

25"

Minimum to Wall

When installing an All-Refrigerator and All-Freezer side-by-side, allow 25" for a full 130° door swing, or 15" min. on the hinge sides for pan access.

90 ° Door Swing

36-3/4"

90° door swing with optional WX14X99 door stop.

4" Min.

to Wall

251Dia59

25"

Min. to

Wall

130 ° Door Swing

0"

251Dia60

130 ° Door Swing

25"

Wall

ZUG75 Unified Grille Panel Kit is available for side-by-side installations. See Trim Kit descriptions.

251Dia61

Specification Revised 4/05

110156

R

Listed by

Underwriters

Laboratories

For answers to your Monogram, ® GE Profile ™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center ® service, 800.626.2000.

ZIF36NM – GE Monogram 36" Built-In All-Freezer

Design Information

Flush or Semi-Flush Enclosure Installation

True Flush Installation

0"

True Flush Installation

In a flush installation, the freezer doors will align evenly with the front face of adjacent cabinet doors. The freezer blends into the surrounding cabinetry.

3/4"

Semi-Flush Installation

Semi-Flush Installation

These freezers can also be installed semi-flush into an enclosure using the minimum cutout width.

The case trim creates a frame around the opening.

Monogram built-in refrigerators and freezers can be installed flush with typical 24-3/4" deep cabinetry.

When installed semi-flush, the case trim will conceal slight gaps around the enclosure. The refrigerator will project forward approximately 3/4" beyond the front face of surrounding cabinetry.

461Dia3

Side Panel Requirements:

• Side panels are not required whenever the refrigerator or freezer is installed into an enclosure or between pantry and oven cabinets.

• Side panels are required whenever the sides of the product are exposed.

• Side panel sizes vary depending on the type of installation being made.

To accomplish an attractive installation, you must:

1. Determine the need for side panels.

2. Determine side panel thickness.

3. Order matching side panels from the cabinet manufacturer.

Be sure to provide the exact dimensions.

461Dia4

Specification Revised 4/05

110156

R

Listed by

Underwriters

Laboratories

For answers to your Monogram, ® GE Profile ™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center ® service, 800.626.2000.

Specification Revised 4/05

110156

Features and Benefits

• 21.9 Cu. Ft. Freezer Capacity

• Wire Freezer Shelves (5 Adjustable,

1 Fixed, 1 Full-Width Fixed)

• Wire Baskets with Full-Extension Slides

(2 Regular, 4 Large)

• 2 Extra Large Wire Baskets with

Easy Access Lid and Full Extension Slides

• 8 Door Bins and Gallon Storage

• Automatic Defrost Sealed System Design

• Full Extension Slides

• Door Panels Required

• Model ZIF36NMRH – Door panels required

(right-handed door swing)

• Model ZIF36NMLH – Door panels required

(left-handed door swing)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement