DLM-2 Series

Add to My manuals
2 Pages

advertisement

DLM-2 Series | Manualzz

TYPE:

CATALOG #:

NOTES:

DLM-2 Series

Thermoplastic Housing 6V-12W Capacity

Lead-Calcium Battery Unit

Standard Features

• Each self-contained unit comes with two (2) 6V high intensity glass wedge based incandescent lamps.

• Constructed of high-impact UL recognized 94V 5VA thermoplastic. Resists denting, peeling, scratching and corrosion. Transparent polycarbonate lens.

• Sealed, maintenance-free Lead-Calcium batteries.

• Integrated circuitry offers 120/277VAC 0.08/0.04A standard, automatic charging, instantaneous transfer, test switch, long life LED AC charge monitor light, temperature compensated charger, short-circuit proof and reverse polarity protected. Low battery voltage disconnect, brownout protection, and lockout (automatic battery connection).

• Can be mounted in any orientation on walls or ceilings. No screws or other mounting hardware is visible.

• UL924 Listed

• Damp location standard

• 3-year limited warranty

Detailed warranty terms located at: www.emergi-lite.com/usa/files/EL_Warranty.pdf

Performance

In both mechanical and electrical performance, the DLM-2 is a superior value in its class.

Its tough thermoplastic body and flush mounted heads will not dent, peel or corrode. The snap-together lens and body and self-connecting power plug make installation quick and easy.

Electrical performance is assured by a 6 volt maintenance-free Lead-Calcium battery and a solid state charger with premium features such as: lockout, Temperature compensation, and low voltage disconnect.

Selectable 120/277 standard operation.

Snap-on housing Self-connecting power plug

Suggested Specification

Supply and install Emergi-Lite ® Model DLM-2, 6 volt, emergency lighting unit. Unit shall be fully automatic, selfcontained, maintenancefree and listed to UL 924.

Circuitry: shall include a 120/277 Vac 60 Hz, 0.08/.04 Amps transformer, automatic charging/instantaneous transfer, test switch, long life LED AC charge monitor light. The charger shall utilize a computer tested integrated circuit which samples the battery in relation to its temperature, state of charge and input voltage fluctuations. The charger shall be current limited, temperature compensated, shortcircuit protected and reverse polarity protected. The charger shall recharge the battery per UL924 specifications. Electrical features shall include: Low voltage battery disconnect, Brownout protection, and Battery lockout.

Battery: shall be 6 volt, maintenance-free and have starved electrolyte in a sealed case. To prevent loss of electrolyte through gassing, the battery shall operate by the principle of electrolyte recombination.

Housing/Heads and Lens: The housing/heads shall be constructed of high impact, UL recognized, 94, 5VA thermoplastic. The unit shall resist denting, peeling, scratching and corrosion. Lamps shall be high intensity allglass wedge base. The transparent lens shall be constructed of polycarbonate. Alternate lamp sockets shall be provided to adjust photometric pattern.

Mounting: The unit shall be mountable in any orientation, on walls or ceilings. A universal mounting pattern, rear key-hole slots, and conduit entry on the top shall be provided. The lens, housing and backplate shall be designed for snap-together assembly to eliminate screws. A selfconnecting power-plug shall be provided to facilitate easy installation.

Lamps: two lamps 6V 5.4 W wedge-base incandescent).

Unit Warranty*

Entire unit (excluding lamps) carries a 3-year Full Warranty.

Battery Warranty*

Sealed Lead-Calcium: 8-year life expectancy.

3-year Full Warranty, plus 3-year pro rata warranty.

* Subject to proper installation and maintenance.

29

Accessories

(order as a separate item)

DESCRIPTION

Wire Guard WG3-E

PART NUMBER

Power Consumption/Unit Rating

Series

Battery

Type

DC

Voltage

Watts to 87-1/2% of rated battery voltage*

1-1/2 hrs 2 hrs 3 hrs 4 hrs

DLM-2

Lead-

Calcium

6V 12 – –

* Stand-by power consumption is 50% lower for Lead-Calcium batteries.

Units Dual

Voltage*

Current

Maximum

120VAC

277VAC

08A

.04A

How to Order

SERIES

DLM-2= DLM-2 Battery-Powered Emergency Lighting

Dimensions

Dimensions are approximate and subject to change.

2-3/4”

12”

Example: DLM-2

5”

All information and specifications contained in this specsheet are subject to change due to engineer design, errors and omissions.

Illustrations and diagrams within this specsheet may vary from actual products.

31 2016© Thomas & Betts Limited. All rights reserved.

advertisement

Related manuals

advertisement