Covers Mounting Adapters

Accessories
Enclosures and Mounting Adapters
ENCLOSURES, BRACKETS, CLIPS, DIN RAIL & MOUNTING ADAPTERS
ENCLOSURES
Product
NEMA-3R-L A
Enclosure
RM-1000-ENCL
Enclosure
Features
Accessory For
Metal NEMA-3R electrical box with lenses for viewing the
single-phase PumpSaver® status lights. H 6” x W 6” D x 4”
Single-Phase PumpSaver
Steel enclosure for protecting a Littelfuse RM1000 remote
communications monitor from adverse affects of weather and
vandalism, while allowing normal communications connections
to the RM1000 unit. Its superior design protects an RM1000 from
overexposure to UV sunlight as well as from hail during a storm,
and it incorporates a seal around the opening in the back to seal
the unit to the electrical box, keeping rain from contacting the
RM1000 connections. The enclosure also features a built-in
padlock tab (padlock not included) to lock the cover to deter
vandalism. H 6.4” x W 6.3” x D 1.7”
RM1000
DIN RAIL & MOUNTING ADAPTERS
Product
C103PM (Al)
DIN Rail
P1023-20
DIN Rail Mount Adaptor
Features
Accessory For
Industry standard 35 mm aluminum or steel DIN rail.
C103PM aluminum rail is available in a 36 in.
(91.4 cm) length.
Can be used with all DIN Rail
compatible units.
Allows any 2 x 2 in. (50.8 x 50.8 mm) or 2 x 3 in.
(50.8 x 76.2 mm) module to be mounted on a 35 mm
DIN type rail. Comes complete with mounting
hardware (one #10 - 24 x 1.00 screw and one
#10 - 24 x 1.25 screw) for 0.75 in. (19 mm) and 1 in.
(25.4 mm) thick modules.
Consult the individual datasheet to
determine part compatibility.
BRACKETS & CLIPS
Product
PSCRB8
Hold-down Brackets
PSC8
PSC11
Hold-down Clips
P1023-2
P Clamp
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/relayaccessories
Features
Accessory For
Designed for use with P1011-6 socket. Securely
mounts 8-pin plug-in controls in any position, and
provides protection against vibration. Sold in pairs.
Securely mounts plug in controls in any position.
Also provides protection against vibration. Select the
PSC8 for use with NDS-8, or the PSC11 for use with
NDS-11 sockets. Sold in pairs.
Removable P clamp bracket for mounting MSM
Series timers and FS100 and FS400 Series flashers.
P1011-6
NDS-8 Socket
Timers Series:
Flasher Series:
NDS-11 Socket
MSM
FS100
FS400
Rev: 1-A-062916
Accessories
Enclosures and Mounting Adapters
BRACKETS & CLIPS
BRACKETS & CLIPS
Product
Features
Accessory For
BZ1
Front Panel Mount Kit
Provides an easy method of through-the-panel
mounting of 8-pin or 11-pin plug-in timers, flashers,
and other controls. May be mounted in panels up to
0.125 in. (3.2 mm) thick. Includes two clamps and
two screws.
1.9 +/-.02
(48.3 +/-.5)
2.6 +/-.02
(66.0 +/-.5)
PANEL
OPENING
Illustrates panel opening size
required to mount BZ1.
Inches (Millimeters)
P1023-6
P1023-7
Provides a convenient method of mounting modules.
The 90° orientation of mounting slots makes
installation/removal of modules quick and easy.
Made from steel with a cadmium surface finish.
Mounting Brackets
0.56
(14.3)
0.19
(4.8)
1.5
(38.1)
0.47
(11.9)
d
Series:
ARP FS500 LLC4 LLC5 LLC6
PLMPLMU
PLRPLSPRLM
TDB TDBHTDBL TDI TDIH
TDIL TDM TDMBTDMHTDML
TDR TDS TDSHTDSL TRB
TRDUTRM TRS TRU
1.25
(31.8)
PART
NUMBER
MOUNTING
HOLE SIZE
MOUNTING METHOD
P1023-6
0.19 in. (4.8 mm)
#8 (M4 x 0.7) screw
P1023-7
0.25 in (6.35 mm) Mini-Pot
Used on many 2" x 2" timers. Refer to
individual series datasheet to determine
if this accessory is compatible.
2.1
(53.3)
Inches (Millimeters)
P0500-178
Surface Mount Adapter
P0500-178 is surface mountable with 2 Quick
Mount Fasteners.
ASXX/DSXX
Series Timers
P0500-179 snaps onto DIN Rail.
ASXX/DSXX
Series Timers
Inches
(Millimeters)
P0500-179
DIN Rail Mount Adapter
Inches
(Millimeters)
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/relayaccessories
Rev: 1-A-062916

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project