Gillette | BRAUN SERIES 5 | User's Manual | Gillette BRAUN SERIES 5 User's Manual

Series 5
Series 7
790 cc
Series 7
Series 7 790 cc
rt cleaning
sta
clean
f a s t cl e a n
trimmer
high
low
e
intensiv
off
sensitive
on
empty
reset
Type 5692
98790831_790cc_China_6022.indd 19
07.01.2009 15:18:57 Uhr
3
4 4a
8
Series 7
9
rt cleaning
sta
10
clean
Series 7 790 cc
5
f a s t cl e a n
low
empty
6
11
e
12
13
intensiv
sensitive
off
on
on
2
1
trimmer trimmer
high
14
15
reset
7
16
17
20
18
19
s7
rie
Se
r
me
trim
e
iv
it
ns
c
0c
s7
79
rie
Se
on
se
off
re
se
ive
t
ns
inte
2
98790831_790cc_China_6022.indd 2
07.01.2009 15:18:39 Uhr
STOP
3
98790831_790cc_China_6022.indd 3
07.01.2009 15:18:40 Uhr
clean
cleaning
clean
an
st
a rt
le
fast c
high
low
1
empty
2
new
fast clean
cleaning
clean
st
a rt
clean
cleaning
st
a rt
n
lea
fast c
high
n
lea
fast c
low
high
empty
low
empty
fast clean
fast clean
high
high
low
low
high
low
empty
empty
empty
reset
trimm
er
Serie
s7
st
a rt
cleaning
fast clea
clean
n
high
low
empty
4
98790831_790cc_China_6022.indd 4
07.01.2009 15:18:41 Uhr
s ta
rt cleaning
clean
f a st cle a n
st
a rt
cleaning
f a st cle
clean
an
high
low
s ta
rt cleaning
clean
f a st c le a n
st
a rt
cleaning
f a st cle
clean
an
high
low
gie
h y ne
battery
empty
5
98790831_790cc_China_6022.indd 5
07.01.2009 15:18:42 Uhr
battery
ien
hyg e
battery
ien
hyg e
on
off
nsive
sitive
off
nsive
sitive
nsive
off
sitive
sensitive
on
normal
on
intensive
6
98790831_790cc_China_6022.indd 6
07.01.2009 15:18:44 Uhr
tr
ck
on
off
lo
intensive
sensitive
reset
2
trimmer
lock
k
loc
1
off
on
lock
release
reset
er
trimm
s ta
rt cleaning
fast clea
clean
n
high
low
empty
7
98790831_790cc_China_6022.indd 7
07.01.2009 15:18:45 Uhr
trim
on
r
me
er
release
oil
release
click!
trimmer
release
Series 7
release
Series 7
release
release
new
old
8
98790831_790cc_China_6022.indd 8
07.01.2009 15:18:46 Uhr
batte
Series 7
gie
h y ne
ry
70S
mer
release
70S
9
98790831_790cc_China_6022.indd 9
07.01.2009 15:18:48 Uhr
10
98790831_790cc_China_6022.indd 10
07.01.2009 15:18:49 Uhr
11
98790831_790cc_China_6022.indd 11
07.01.2009 15:18:50 Uhr
English
STOP
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you enjoy your new Gillette Shaver.
Warning
Your shaving system is provided with a special
cord set, which has an integrated Safety Extra
Low Voltage power supply. Do not exchange or
tamper with any part of it, otherwise there is risk
of an electric shock.
This appliance is not intended for use by children
or persons with reduced physical or mental
capabilities, unless they are supervised by a
person responsible for their safety. In general,
we recommend that you keep the appliance out
of reach of children.
To prevent the cleaning fluid from leaking, ensure
that the Clean&Renew station is placed on a flat
surface. When a cleaning cartridge is installed,
do not tip, move suddenly or transport the
station in any way as cleaning fluid might spill
out of the cartridge. Do not place the station
inside a mirror cabinet, nor over a radiator, nor
place it on a polished or lacquered surface.
The cleaning cartridge contains a highly
flammable liquid so keep it away from sources of
ignition. Do not smoke near the station. Do not
expose to direct sunlight for long periods of time.
Do not refill the cartridge and use only original
Braun refill cartridges.
Description
Clean&Renew station
1 Cleaning fluid display
2 Lift button for cartridge exchange
3 Station-to-shaver contacts
4 «start cleaning» button
D «fast clean» button
5 Cleaning program indicators
6 Station power socket
7 Cleaning cartridge
Shaver
8 Foil & Cutter cassette
9 Cassette release button
0 Shaver head «lock» switch
q Pop-out long hair trimmer
12
98790831_790cc_China_6022.indd 12
07.01.2009 15:18:52 Uhr
w
e
r
t
z
u
i
o
p
On/off switch
«sensitive» (–) setting button
«intensive» (+) setting button
Reset button
Shaver display
Shaver-to-station contacts
Shaver power socket
Travel case
Special cord set
Before shaving
Prior to first use you must connect the shaver to
an electrical outlet using the special cord set p
or alternatively proceed as below.
clean
Installing the Clean&Renew station
• Using the special cord set p, connect the
station power socket 6 to an electrical outlet.
cleaning
clean
st
a rt
an
• Press the lift button 2 to open the housing.
le
fast c
high
low
1
empty
2
• Hold the cleaning cartridge 7 down on a flat,
stable surface (e.g. table).
new
fast clean
• Carefully remove the lid from the cartridge.
cleaning
clean
st
a rt
clean
cleaning
st
a rt
n
lea
fast c
high
n
lea
fast c
low
high
empty
low
empty
fast clean
fast clean
• Slide the cartridge into the base of the station
as far as it will go.
• Slowly close the housing by pushing it down
until it locks.
The cleaning fluid display 1 will show how much
fluid is in the cartridge:
high
high
low
low
high
low
empty
empty
empty
«high» up to 30 cleaning cycles available
«low»
up to 7 cleaning cycles remaining
«empty» new cartridge required
Charging and cleaning the shaver
Insert the shaver head down into the cleaning
station. (The contacts u on the back of the
shaver will align with the contacts 3 in the
cleaning station).
reset
trimm
er
Serie
s7
st
a rt
cleaning
fast clea
high
low
empty
clean
n
If required, the Clean&Renew station will automatically charge the shaver. The hygiene status
of the shaver will also be analyzed and one of
the following cleaning program indicators 5 will
light up:
13
98790831_790cc_China_6022.indd 13
07.01.2009 15:18:53 Uhr
s ta
rt cleaning
clean
f a st cle a n
ar
st
t cleaning
f a st cle
«clean»
« »
«
»
«
»
shaver is clean
short economical cleaning required
normal level of cleaning required
high intensive cleaning required
If the station selects one of the required cleaning
programs, it will not start unless you press the
«start cleaning» button 4. For best shaving
results, we recommend cleaning after each
shave.
clean
an
high
low
Whilst cleaning is in progress, the respective
cleaning program indicator will blink. Each
cleaning program consists of several cycles,
where cleaning fluid is flushed through the
shaver head and a heat drying process dries
the shaver. Depending on the program selected
the total cleaning time will range from 32 to 43
minutes.
s ta
rt cleaning
clean
The cleaning programs should not be interrupted. Please note that whilst the shaver is
drying, the shaving head may be hot and wet.
When the program is finished, the blue «clean»
indicator will light up. Your shaver is now clean
and ready for use.
f a st c le a n
st
a
rt cleaning
f a st cle
Fast cleaning
Push the «fast clean» button D to activate
the fast clean program without drying. This
program takes about 25 seconds only and is
recommended when you do not have time to
wait for one of the automatic cleaning programs.
If you remove the shaver just after the program
has finished, wipe off the shaver head with a
tissue to avoid dripping.
clean
an
high
low
empty
Stand-by mode
10 minutes after completing the charging or
cleaning session, the Clean&Renew station
switches to the stand-by mode: The indicators
of the Clean&Renew station turn off.
gie
h y ne
battery
Shaver display
The shaver display z shows the charge status of
the battery on the left, and the hygiene status on
the right. (6 dark segments are shown on each
side when the battery is fully charged and the
shaver is hygienically clean).
14
98790831_790cc_China_6022.indd 14
07.01.2009 15:18:53 Uhr
Battery segments:
During charging or when using the shaver, the
respective battery segments will blink. When
fully charged all 6 segments are shown. With
decreasing charge the segments gradually
disappear.
battery
ien
hyg e
Low charge indicator:
The low charge indicator provided with a red
frame blinks to indicate that the charge has
dropped below 20%. The remaining battery
capacity is sufficient for 2 to 3 shaves.
battery
ien
hyg e
Hygiene segments:
All 6 hygiene segments will appear after the
shaver has been cleaned in the Clean&Renew
station. When the shaver is being used, the
hygiene segments will gradually disappear.
Once the shaver is returned to the station, the
system will automatically select the appropriate
cleaning program and restore the segments
to maximum hygiene. Given that rinsing the
shaver under tap water is not as hygienic as the
cleaning station, the hygiene segments will only
restore themselves when the shaver has been
cleaned in the Clean&Renew station.
Charging information
• A full charge provides up to 50 minutes
of cordless shaving time. This may vary
according to your beard growth.
• The best environmental temperature for
charging is between 5 °C to 35 °C. Do not
expose the shaver to temperatures higher than
50 °C for extended periods of time.
Personalizing your shaver
on
• «Intensive» = dark blue (powerful shave)
• «Normal»
= light blue
nsive
off
sitive
nsive
on
off
sitive
off
sensitive
nsive
normal
sitive
intensive
on
Personalizing your shaver
With the «sensitive» e and «intensive» r
buttons you can choose the best setting for
shaving different areas of your face and as per
your specific needs. The different settings are
indicated by the pilot light incorporated in the
on/off switch w:
• «Sensitive» = white (for a thorough comfortable
shave in sensitive areas of your
face such as neck)
15
98790831_790cc_China_6022.indd 15
07.01.2009 15:18:54 Uhr
For a thorough and fast shave we recommend
the «intensive» setting.
Pressing the « + » or « – » button activates your
preferred setting. When switching on next time,
the last used setting will be activated.
ck
• The pivoting shaver head and floating foils
automatically adjust to every contour of your
face.
lo
intensive
sensitive
off
on
tr
How to use
Press the on/off switch w to operate the shaver:
reset
2
• To shave hard to reach areas (e.g. under the
nose) slide the shaver head «lock» switch 0 to
the back position to lock the pivoting head at
an angle.
lock
k
loc
1
trimmer
• To trim sideburns, moustache or beard, slide
the pop-out long hair trimmer upwards.
off
on
lock
Tips for the perfect shave
release
For best shaving results, Braun recommends you
follow 3 simple steps:
1. Always shave before washing your face.
2. At all times, hold the shaver at right angles
(90°) to your skin.
3. Stretch your skin and shave against the
direction of your beard growth.
Shaving with the cord
If the shaver has run out of power (discharged),
and you do not have the time to recharge it in the
Clean&Renew station, you may also shave with
the shaver connected to an electrical outlet via
the special cord set.
Cleaning
reset
er
trimm
s ta
rt cleaning
fast clea
high
low
empty
clean
n
Automatic cleaning
After each shave, return the shaver to the
Clean&Renew station and proceed as described
above in the section «Before shaving».
All charging and cleaning needs are then
automatically taken care of. With daily use, a
cleaning cartridge should be sufficient for about
30 cleaning cycles.
The hygienic cleaning cartridge contains alcohol,
which once opened will naturally evaporate
slowly into the surrounding air. Each cartridge,
if not used daily, should be replaced after
approximately 8 weeks.
16
98790831_790cc_China_6022.indd 16
07.01.2009 15:18:55 Uhr
The cleaning cartridge also contains lubricants,
which may leave residual marks on the outer foil
frame after cleaning. However, these marks can
be removed easily by wiping gently with a cloth
or soft tissue paper.
Manual cleaning
The shaver head is suitable for cleaning
under running tap water.
Warning: Detach the shaver from the
power supply before cleaning the shaver
head in water.
trim
Rinsing the shaving head under running water
is an alternative way to keep the shaver clean,
especially when travelling:
r
me
on
• Switch the shaver on (cordless) w and rinse
the shaving head under hot running water.
You may use liquid soap without abrasive
substances. Rinse off all foam and let the
shaver run for a few more seconds.
release
er
• Next, switch off the shaver, press the release
button 9 to remove the Foil & Cutter cassette
8 and let it dry.
oil
• If you regularly clean the shaver under
water, then once a week apply a drop of
light machine oil on top of the Foil & Cutter
cassette.
release
click!
trimmer
release
Alternatively, you may clean the shaver using the
brush provided:
Series 7
• Switch off the shaver. Remove the Foil & Cutter
cassette 8 and tap it out on a flat surface.
Using the brush, clean the inner area of the
pivoting head. However, do not clean the
cassette with the brush as this may damage it.
release
Series 7
release
release
new
Cleaning the housing
From time to time clean the housing of the
shaver and the Clean&Renew station with a
damp cloth, especially inside the cleaning
chamber where the shaver rests.
old
Replacing the cleaning cartridge
After having pressed the lift button 2 to open the
housing, wait for a few seconds before removing
the used cartridge to avoid any dripping.
Before discarding the used cartridge, make sure
to close the openings using the lid of the new
cartridge, since the used cartridge will contain
contaminated cleaning solution.
17
98790831_790cc_China_6022.indd 17
07.01.2009 15:18:55 Uhr
ry
gie
h y ne
batte
Keeping your shaver in top shape
Replacing the Foil & Cutter cassette / reset
To maintain 100% shaving performance, replace the Foil & Cutter cassette 8, when the
replacement symbol lights up on the shaver
display z (after about 18 months) or when
cassette is worn.
The replacement symbol will remind you during
the next 7 shaves to replace the Foil & Cutter
cassette. Then the shaver will automatically reset
the display.
Series 7
70S
mer
release
After you have replaced the Foil & Cutter
cassette, use a ball-pen to push the reset button
t for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and
goes off when the reset is complete. The manual
reset can be done at any time.
Accessories
70S
Available at your dealer or Braun Service
Centres:
• Foil & Cutter cassette 70S
• Cleaning cartridge Clean&Renew CCR
Environmental notice
This product contains rechargeable
batteries. In the interest of protecting the
environment, please do not dispose of the
product in household waste at the end of
its useful life. Disposal can take place at a
Braun Service Centre or at appropriate
collection points provided in your country.
The cleaning cartridge can be disposed with
regular household waste.
Subject to change without notice.
This product conforms to the European
Directives EMC 2004/108/EC and Low
Voltage 2006/95/EC.
For electric specifications, see printing on the
special cord set.
18
98790831_790cc_China_6022.indd 18
98790831/I-09
China/GB
07.01.2009 15:18:56 Uhr
Se
Download PDF